Tampere University of Technology

TUTCRIS Research Portal

Petri Vuoristo

  1. Published

    Arc-sprayed Fe-based coatings from coredwires for wear and corrosion protection in power engineering

    Yury, K., Filippov, M., Makarov, A., Malygina, I., Soboleva, N., Fantozzi, D., Andrea, M., Koivuluoto, H. & Vuoristo, P., 1 Feb 2018, In : Coatings. 8, 2, 71.

    Research output: Contribution to journalArticleScientificpeer-review

  2. Published

    MHD-eristepinnoitteiden sputterointi ja sähköiset ominaisuudet

    Wahlroos, J., Vuoristo, P., Mäntylä, T. & Kettunen, P., 1986, Tampere: Tampereen teknillinen korkeakoulu. (Tampereen teknillinen korkeakoulu, Materiaaliopin laitos, Raportti; no. 62/1986)

    Research output: Book/ReportCommissioned reportProfessional

  3. Published

    Microstructure and abrasion wear resistance of laser-clad TiC-Ni coatings on low carbon steel

    Vuoristo, P. & Mäntylä, T., 1997, Tampere: Tampereen teknillinen korkeakoulu. 10 p. (Tampereen teknillinen korkeakoulu, Materiaaliopin laitos, Raportti; no. 3/1997)

    Research output: Book/ReportCommissioned reportProfessional

  4. Published

    Structure and abrasive wear properties of carbide coatings prepared by Hobart Tafa JP-5000 HP/HVOF spray system

    Vuoristo, P., Niemi, K., Mäkelä, A. & Mäntylä, T., 1993, Tampere: Tampere University of Technology. 11 p. (Tampere University of Technology, Institute of Materials Science, Report; no. 47/1993)

    Research output: Book/ReportCommissioned reportProfessional

  5. Published

    High temperature electrical insulating properties of rf magnetron sputtered alumina coatings on copper

    Vuoristo, P., Mäntylä, T. & Kettunen, P., 1989, Proc. New Materials and Processes, 5th SSMS Scandinavian Symposium on Materials Science, Copenhagen,Denmark, May 22-25, 1989. Hansson, I. L. H. & Lilholt, H. (eds.). p. 713-720

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  6. Published

    Abstracts of the 28th International Conference on Surface Modification Technologies, SMT28, Tampere University of Technology, Tampere, Finland, June 16-18, 2014

    Vuoristo, P. (ed.), Koivuluoto, H. (ed.) & Sudarshan, T. S. (ed.), 2014, Tampere: Tampere University of Technology. 150 p.

    Research output: Book/ReportAnthologyScientificpeer-review

  7. Published

    Sputtered Al2O3 and MgO Coatings for Electrical Insulation at High Temperatures - An Application to Interelectrode Insulation of Copper Electrodes in MHD Generators

    Vuoristo, P., 1991, Tampereen teknillinen korkeakoulu. (Tampereen teknillinen korkeakoulu)

    Research output: Book/ReportCommissioned reportProfessional

  8. Published

    Timantinkaltaiset hiilipinnoitteet

    Vuoristo, P., 1986, Tampere: Tampereen teknillinen korkeakoulu. 46 p. (Tampereen teknillinen korkeakoulu, Materiaaliopin laitos, Raportti; no. 50/1986)

    Research output: Book/ReportCommissioned reportProfessional

  9. Published

    Industrial and research activities in thermal spray technology in the Nordic Region of Europe

    Vuoristo, P. & Nylen, P., 2007, In : Journal of Thermal Spray Technology. 16, 4, p. 466-471

    Research output: Contribution to journalArticleScientificpeer-review

  10. Published

    Titaanit ja titaaniseokset

    Vuoristo, P. & Siitonen, P., 1985, Raaka-ainekäsikirja 3 Kuparit, kevytmetallit. Valmet: Rautpohja, p. 175-226

    Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

  11. Published

    Structure and abrasion wear resistance of tungsten carbide and chromium carbide coatings deposited by CDS/HVOF spray method

    Vuoristo, P., Niemi, K. & Mäntylä, T., 1994, Tampere: Tampere University of Technology. 19 p. (Tampere University of Technology, Institute of Materials Science, Report; no. 44/1994)

    Research output: Book/ReportCommissioned reportProfessional

  12. Published

    Pinnoitettu MHD-elektrodi

    Vuoristo, P., Mäntylä, T. & Kettunen, P., 1989, Tampere: Tampereen teknillinen korkeakoulu. 36 p. (TTKK/Materiaalioppi, Raportti; no. 29)

    Research output: Book/ReportCommissioned reportProfessional

  13. Published

    Terminen ruiskupinnoitus

    Vuoristo, P., 2004, In : Hitsaustekniikka. 5, p. 2-3

    Research output: Contribution to journalArticleProfessional

  14. Published

    Laser coating and thermal spraying - process basics and coating properies

    Vuoristo, P., Tuominen, J. & Nurminen, J., 2005, International Thermal Spray Conference & Exposition ITSC 2005, Basel, Swizerland, May 2 - 4, 2005. p. 8 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  15. Published

    Application of Sputtered Alumina Coatings as Insulating Coatings for Metallic MHD Electrode and Insulator Modules

    Vuoristo, P., Mäntylä, T. & Kettunen, P., 1991, In : Magnetohydrodynamics - An International Journal. 3, 1/2, p. 55-63

    Research output: Contribution to journalArticleScientificpeer-review

  16. Published

    Super D-Gun -menetelmällä valmistettujen karbidipinnoitteiden rakenne ja kulumiskestävyys

    Vuoristo, P., Niemi, K., Mäkelä, A. & Mäntylä, T., 1994, Tampere: Tampereen teknillinen korkeakoulu. 11 p. (Tampereen teknillinen korkeakoulu, Materiaaliopin laitos, Raportti; no. 15/1994)

    Research output: Book/ReportCommissioned reportProfessional

  17. Published

    Development of HVOF sparyed NiCoCrAlYRe coatings for use as bond coats of plasma sprayed thermal barrier coatings

    Vuoristo, P., Ahmaniemi, S., Tuurna, S., Mäntylä, T., Cordano, E., Fignino, F. & Gualco, G. C., 2002, International Thermal Spray Conference, Essen 4.-6.3.2002. Lugscheider, E. (ed.). p. 470-475

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  18. Published

    Hard Oxide Coatings Deposited by Plasma Spraying and Detonation Gun Spraying Techniques

    Vuoristo, P. M. J., Niemi, K. J. & Mäntylä, T. A., 1991, Proc. 2nd Plasma-Technik-Symposium, Lucerne, Switzerland, June 5-7, 1991. p. 323-331

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  19. Published

    Engineering surfaces by thermally sprayed polymer coatings

    Vuoristo, P., 2005, Engineering of Surface Properties of Plastic and Composite Materials/Thermal Analysis of polymers, Kokkola 20.-21.9.2005. p. 22 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  20. Published

    Electrical Insulating Properties of R.F. - Sputtered Magnesia Coatings

    Vuoristo, P., Wahlroos, J., Mäntylä, T. & Kettunen, P., 1988, In : Thin Solid Films. 166

    Research output: Contribution to journalArticleScientificpeer-review

  21. Published

    Termisesti ruiskutetut polymeeripinnoitteet

    Vuoristo, P., Harju, M. & Mäntylä, T., 1997, In : Pintatekniikka. 3, p. 32-35

    Research output: Contribution to journalArticleProfessional

  22. Published

    Structure and wear properties of thermal sprayed (Ti,Mo)C-NiCo cermet coatings

    Vuoristo, P., Niemi, K., Jouve, B., Stenberg, T., Mäntylä, T., Berger, L-M., Nebelung, M. & Hermel, W., 1995, Proc of ITSC '95 (International Thermal Spray Conference '95), Kobe, Japan, 22-26 May 1995. Osaka, Japan, p. 699-704

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  23. Published

    Properties of ceramic coatings prepared by HVOF and plasma spraying of titanium suboxide powders

    Vuoristo, P., Määttä, A., Mäntylä, T., Berger, L-M. & Thiele, S., 2002, International Thermal Spray Conference, Essen 4.-6.3.2002. Lugscheider, E. (ed.). p. 488-493

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  24. Published

    Onteloelementtien valmistuksessa käytettävän ruuvin kulumistutkimus

    Vuoristo, P., Niemi, K. & Mäntylä, T., 1992, Tampereen teknillinen korkeakoulu. 6 p. (Tampereen teknillinen korkeakoulu, Materiaalioppi, Raportti; no. 38/1992)

    Research output: Book/ReportCommissioned reportProfessional

  25. Published

    Pinnoitteille lisää sovellutuksia - teollisuudesta etsitään uusia käyttökohteita

    Vuoristo, P., Niemi, K. & Mäntylä, T., 1992, In : Kunnossapitolehti. 1, p. 18-21

    Research output: Contribution to journalArticleProfessional

  26. Published

    Magnesiumseokset konstruktiomateriaaleina

    Vuoristo, P., 1989, Materiaalitieteen kesäseminaari, Materiaalitieteellinen Yhdistys r.y. ja TTKK, Materiaaliopin laitos, Hartola, 13.-14.6.1989.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  27. Published

    Rolling contact fatigue (RCF) of failure mechanisms of thermally sprayed coatings under non-sliding and sliding conditions (F17)

    Vuoristo, P. & Mäntylä, T., 2001, C0ST Action 516 - Tribology - Scientific final report. Holmberg, K. (ed.). Belgium: European Communities, p. 264-268

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  28. Published

    Microstructure and Properties of Thermally Sprayed TiC-Ni and (Ti,Mo)C-NiCo Coatings

    Vuoristo, P., Stenberg, T., Mäntylä, T., Berger, L-M. & Nebelung, M., 1996, Thermal Spray: Practical Solutions for Engineering Problems, Proc. of 9th National Thermal Spray Conference, 7-11.1996. Berndt, C. C. (ed.). Materiasl Park, Ohio: ASM International, p. 729-734

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  29. Published

    Kulumista kestävät pintakäsittelyt ja pinnoitteet

    Vuoristo, P. & Mäntylä, T., 1997, In : Pintatekniikka. 2, 1, p. 8-17

    Research output: Contribution to journalArticleProfessional

  30. Published

    Detonaatiopinnoitus tuli Suomeen

    Vuoristo, P. & Niemi, K., 1990, In : Konepajamies. 43, 5, p. 30-31

    Research output: Contribution to journalArticleProfessional

  31. Published

    Termisen ruiskutuksen toiminta Suomessa - teollinen pinnoitus, tutkimus, kehitys ja koulutus

    Vuoristo, P., 2004, In : Hitsaustekniikka. 5, p. 41-43

    Research output: Contribution to journalArticleProfessional

  32. Published

    Nestelaakeripalojen pinnoitteiden rakenne

    Vuoristo, P., Niemi, K. & Mäntylä, T., 1993, Tampere: Tampereen teknillinen korkeakoulu. 9 p. (Tampereen teknillinen korkeakoulu, Materiaaliopin laitos, Raportti; no. 33/1993)

    Research output: Book/ReportCommissioned reportProfessional

  33. Published

    Surface changes in thermally sprayed hard coatings by wear of different abrasives

    Vuoristo, P., Laurila, J., Mäntylä, T., Niemi, K., Rekola, S. & Ahmaniemi, S., 2004, ITSC 2004, International Thermal Spray Conference & Exposition, Thermal Spray Solutions, Advances in Technology and Application, Osaka, Japan, May 10-12, 2004. p. 6 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  34. Published

    RBS analysis of sputter-deposited MgO films

    Vuoristo, P., Mäntylä, T., Kettunen, P. & Lappalainen, R., 1991, In : Vacuum. 42, 15, p. 1001-1004

    Research output: Contribution to journalArticleScientificpeer-review

  35. Published

    Structure and wear properties of WC+17%Co coatings prepared by HVOF and detonation gun spraying

    Vuoristo, P., Niemi, K., Mäkelä, A. & Mäntylä, T., 1993, Tampere University of Technology. 15 p. (Tampere University of Technology, Institute of Materials Science, Report; no. 46/1993)

    Research output: Book/ReportCommissioned reportProfessional

  36. Published

    First International Conference on Plasma Surface Engineering

    Vuoristo, P., 1988, Tampereen teknillinen korkeakoulu. 10 p. (TTKK, Materiaaliopin laitos, Raportti; no. 53/1988)

    Research output: Book/ReportCommissioned reportProfessional

  37. Published

    Abrasion wear resistance of some carbide containing coatings deposited by laser cladding

    Vuoristo, P., Niemi, K. & Mäntylä, T., 1991, Tampere: Tampere University of Technology. 9 p. (Tampere University of Technology, Institute of Materials Science, Report; no. 23/1991)

    Research output: Book/ReportCommissioned reportProfessional

  38. Published

    Pinnoitteille lisää sovelluksia - myös muoviteollisuudesta etsitään uusia käyttökohteita

    Vuoristo, P., Niemi, K. & Mäntylä, T., 1993, In : Muovi - Plast. 2, p. 18-22

    Research output: Contribution to journalArticleProfessional

  39. Published

    Post-processing thermally sprayed coatings by high power Nd:YAG laser

    Vuoristo, P., Tuominen, J. & Mäntylä, T., 2000, Nordisk Konferens Termisk Sprutning, Köpenhamn 4-5, oktober 2000. p. 9 s.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  40. Published

    Evaluation of Thermally Sprayed and Other Polymeric Coatings for Use in Natural Gas Pipeline Components

    Vuoristo, P., Leivo, E., Turunen, E., Leino, M., Järvelä, P. & Mäntylä, T., 2003, Thermal Spray 2003, Advancing the Science and Applying the Technology, Vol. 2, Proceedings of the 2003 International Thermal Spray Conference, 5-8 May, Orlando, Florida, USA. Marple, B. R. & Moreau, C. (eds.). ASM International, p. 1693-1702

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  41. Published

    Spray parameter effects on structure and properties of detonation gun sprayed WC+17%Co coatings

    Vuoristo, P., Niemi, K., Mäkelä, A. & Mäntylä, T., 1993, Thermal Spray Coatings: Research, Design and Applications. Proceedings of 5th National Thermal Spray Conference NTSC'93, June 7-11, Anaheim, California, U SA. p. 173-178

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  42. Published

    Comparison of Different Hardmetal-like Coatings Sprayed by Plasma and Detonation Gun Processes

    Vuoristo, P., Niemi, K., Mäntylä, T., Berger, L-M. & Nebelung, M., 1995, Advances in Thermal Spray Science and Technology, Proc. of the Eight National Thermal Spray Conference, 11-15. September 1995. Berndt, C. C. & Sampath, S. (eds.). Materials Park, OH: ASM International, p. 309-315

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  43. Published

    Laserpinnoitus- ja pintakäsittely

    Vuoristo, P., 2005, Tampere Laser Summit Seminar 2005, New Laser Technologies for Renewing the Industry, 7.6.2005, TTY. p. 123-132

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  44. Published

    Modification of the structure and properties of thermally sprayed coatings by various post-processing methods

    Vuoristo, P., 2000, Metal 2000, 9th International Metallurgical Conference, 16.-18.5.2000 Ostrava. Ostrava: Tanger, spol. s r.o. Ostrava, p. 1-8 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  45. Published

    Stoichiometry and Impurities in Sputtered Alumina Films on Copper

    Vuoristo, P., Mäntylä, T., Kettunen, P. & Lappalainen, R., 1991, In : Thin Solid Films. 204, p. 297-311

    Research output: Contribution to journalArticleScientificpeer-review

  46. Published

    Terminen ruiskutus - menetelmät, pinnoitteet ja teolliset sovellukset

    Vuoristo, P., 2004, In : Hitsaustekniikka. 5, p. 5-18

    Research output: Contribution to journalArticleProfessional

  47. Published

    Laser coating as an industrial coating process

    Vuoristo, P., 2002, Euroceram Interregional Seminar in Tampere region, 10.-11.9.2002, Ceramic Coatings (Pinnoitepäivät). Leivo, J. (ed.). Tampere: TTKK, Materiaaliopin laitos, p. 12 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  48. Published

    ZrO2-pohjaisten keraamijauheiden detonaatiopinnoitus

    Vuoristo, P., Niemi, K. & Mäntylä, T., 1991, Tampere: Tampereen teknillinen korkeakoulu. 18 p. (Tampereen teknillinen korkeakoulu, Materiaaliopin laitos, Raportti; no. 29/1991)

    Research output: Book/ReportCommissioned reportProfessional

  49. Published

    Terminen ruiskutus Pohjoismaissa

    Vuoristo, P. & Nylen, P., 2007, In : Hitsaustekniikka. 57, 6, p. 7-10

    Research output: Contribution to journalArticleProfessional

  50. Published

    MoCVD-menetelmällä valmistetut alumiini- ja magnesiumoksidipinnoitteet

    Vuoristo, P., 1986, Tampere: Tampereen teknillinen korkeakoulu. 19 p. (Tampereen teknillinen korkeakoulu, Materiaaliopin laitos, Raportti; no. 40/1986)

    Research output: Book/ReportCommissioned reportProfessional

  51. Published

    Plasmaruiskutetuista oksidipinnoitteista

    Vuoristo, P., 1985, Tampere: Tampereen teknillinen korkeakoulu. (Tampereen teknillinen korkeakoulu, Materiaaliopin laitos, Raportti; no. 29/1985)

    Research output: Book/ReportCommissioned reportProfessional

  52. Published

    Preparation, structure and wear properties of detonation gun sprayed WC and Cr3C2 based cermet coatings

    Vuoristo, P., Niemi, K., Mäkelä, A. & Mäntylä, T., 1993, Proceedings of 1993 Thermal Spray Conf. (TH '93), March 3.-5, Aachen, Federal Republic of Germany. p. 310-313

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  53. Published

    Wear resistant coatings with low friction properties for high temperature applications (F110)

    Vuoristo, P. & Mäntylä, T., 2001, C0ST Action 516 - Tribology - Scientific final report. Holmberg, K. (ed.). Belgium: European Communities, p. 120-125

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  54. Published

    Plasmaruiskutuspinnoitteita vaativiin kohteisiin

    Vuoristo, P. & Niemi, K., 1986, In : Hitsaustekniikka. 4/1986, p. 39-42

    Research output: Contribution to journalArticleProfessional

  55. Published

    Sputteroitujen krominitridi- ja molybdeeninitridipinnoitteiden rakenne ja ominaisuudet sekä soveltuminen kuparin muovaukseen

    Vuoristo, P., Mäntylä, T. & Kettunen, P., 1989, Tampere: Tampereen teknillinen korkeakoulu. 54 p. (TTKK/Materiaalioppi, Raportti; no. 26)

    Research output: Book/ReportCommissioned reportProfessional

  56. Published

    Structure and Wear Characteristics of WC-Co(Cr) and Cr3C2-NiCr Coatings Sprayed by a New Potential HVOF Process

    Vuoristo, P., Nieminen, R., Mäntylä, T. & Barbezat, G., 1996, Proceedings of TS96 Thermal Spraying Conference,. E., L. (ed.). Düsseldorf: DVS-Bericte Band 175, DVS-Verlag, p. 301-305

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  57. Published

    High velocity sprays boost hardmetal industrial coatings

    Vuoristo, P., 2007, In : Metal Powder Report. 62, 3, p. 22-29

    Research output: Contribution to journalArticleScientific

  58. Published

    Termisesti ruiskutetut muovipinnoitteet

    Vuoristo, P., 2000, Tutkimusta ja uusia sovelluksia muovitekniikassa, Keuruu 8.-9.6.2000 Tampereen teknillinen korkeakoulu, Muovitekniikka. p. 23-29

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  59. Published

    Termisen ruiskutuksen lisäaineet

    Vuoristo, P., 2007, In : Hitsaustekniikka. 57, 6, p. 22-28

    Research output: Contribution to journalArticleProfessional

  60. Published

    International Conference on Metallurgical Coatings

    Vuoristo, P., 1988, Tampereen teknillinen korkeakoulu. 10 p. (TTKK, Materiaaliopin laitos, Raportti; no. 34/1988)

    Research output: Book/ReportCommissioned reportProfessional

  61. Published

    Thermal spray coating processes

    Vuoristo, P., 2014, Comprehensive materials processing, 1st edition Volume 4: Coatings and films. Cameron, D. (ed.). Elsevier, p. 229-276 47 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  62. Published

    On the Properties of Detonation Gun Sprayed and Plasma Sprayed Ceramic Coatings

    Vuoristo, P. M. J., Niemi, K. J. & Mäntylä, T. A., 1992, Int. Thermal Spray Conference, Orlando, Florida, USA, May 28 - June 5, 1992. p. 171-176

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  63. Published

    Ruiskutusmetelmän vaikutus WC-12%Co-jauheesta valmistettujen pinnotteiden rakenteeseen ja kulumiskestävyyteen

    Vuoristo, P. & Mäntylä, T., 1995, Tampere: Tampereen teknillinen korkeakoulu. (Tampereen teknillinen korkeakoulu, Materiaaliopin laitos, Raportti; no. 21/1995)

    Research output: Book/ReportCommissioned reportProfessional

  64. Published

    25th Symposium on Engineering Aspects of MHD

    Vuoristo, P., 1987, Tampere: Tampere University of Technology. 9 p. (Tampere University of Technology, Institute of Materials Science, Report; no. 36/1987)

    Research output: Book/ReportCommissioned reportProfessional

  65. Published

    Adhesion and Structure of R.F.-sputtered Magnesiumoxide Coatings on Various Metal Substrates

    Vuoristo, P., Mäntylä, T. & Kettunen, P., 1986, Tampere: Tampere University of Technology. 21 p. (Tampere University of Technology, Institute of Materials Science, Report; no. 29/1986)

    Research output: Book/ReportCommissioned reportProfessional

  66. Published

    Grafiittisten pystyvalusuulakkeiden pinnoittaminen keraamilla

    Vuoristo, P., Mäntylä, T. & Kettunen, P., 1989, Tampere: Tampereen teknillinen korkeakoulu. 29 p. (TTKK/Materiaalioppi, Raportti; no. 28)

    Research output: Book/ReportCommissioned reportProfessional

  67. Published

    Properties of TiC-Ni Based Coatings Deposited by Different HVOF Spraying

    Vuoristo, P., Väisänen, M., Mäntylä, T. & Berger, L-M., 2000, Thermal Spray Surface Engineering via Applied Research, Proceedings of the 1st International Thermal Spray Conference, 8-11 May 2000, Montréal, Québec, Canada. Berndt, C. C. (ed.). AMS International, p. 509-514

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  68. Published

    Adhesion and Structure of Rf-sputtered Magnesium Oxide Coatings on Various Metal Substrates

    Vuoristo, P., Mäntylä, T. & Kettunen, P., 1986, In : Journal of Vacuum Science & Technology A. 4, 6, p. 2932

    Research output: Contribution to journalArticleScientificpeer-review

  69. Published

    The Use of High Power Diode Laser for Cladding and Surface Treatment

    Vuoristo, P., Tuominen, J., Latokartano, J., Hayhurst, P., Vihinen, J., Mäntylä, T. & Andersson, P., 2002, Proceedings "Mechanical Engineering Research New Possibilities by Co-operation", Seminar 3 Jan 2002, Tampere University of Technology. Hakalehto, K. & Mattila, M. (eds.). p. 49-59

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  70. Published

    Structure and Properties of HVOF and Plasma Sprayed Ceramic Alumina-Chromia Coatings Deposited from Fused and Crushed Powders

    Vuoristo, P., Niemi, K., Matikainen, V., Hyvärinen, L., Koivuluoto, H., Berger, L-M., Scheitz, S. & Shakhverdova, I., 2013, Proceedings of the International Thermal Spray Conference: Thermal Spray 2013 - ITSC 2013: Innovative Coatings Solutions for the Global Economy, May 13-15, 2013, Busan, Republic of Korea. Lima, R. S., Agarwal, A., Hyland, M. M., Lau, Y-C., Mauer, G., McDonald, A. & Toma, F-L. (eds.). ASM International, p. 465-470 6 p. (International Thermal Spray Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  71. Published

    Tiivisterenkaan pinnoitteet

    Vuoristo, P., Niemi, K. & Mäntylä, T., 1992, Tampereen teknillinen korkeakoulu. 8 p. (Tampereen teknillinen korkeakoulu, Materiaalioppi, Raportti; no. 57/1992)

    Research output: Book/ReportCommissioned reportProfessional

  72. Published

    Ceramic Coatings for MHD Electrodes and Insulators

    Vuoristo, P., Mäntylä, T. & Kettunen, P., 1988, Proc. International Scientific Session on MHD Electrical Power Generation, Tampere, Finland, August 18, 1988. p. 82-84

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  73. Published

    Industrial applications and opportunities of hardmetal coatings

    Vuoristo, P. J., 2006, The EURO PM2006 Congress and Exhibition, 22-23 October, 2006, Ghent, Belgium. p. 10 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  74. Published

    Pinnoitusparametrien ja lisäaineen partikkelikoon vaikutus detonaatioruiskutetun AISI 316L -pinnoitteen rakenteeseen

    Vuoristo, P., Niemi, K., Mäkelä, A. & Mäntylä, T., 1994, Tampere: Tampereen teknillinen korkeakoulu. 15 p. (Tampereen teknillinen korkeakoulu, Materiaaliopin laitos, Raportti; no. 20/1994)

    Research output: Book/ReportCommissioned reportProfessional

  75. Published

    Structure and wear resistance of Cr3C2-NiCr coatings deposited by plasma, detonation and high-velocity oxyfuel spraying

    Vuoristo, P., Niemi, K., Mäkelä, A. & Mäntylä, T., 1994, Proc. of the 7th National Thermal Spray Conference NTSC 94, ASM International Materials Park, OH, USA. Berndt, C. C. & Sampath, S. (eds.). p. 121-126

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  76. Published

    Pinnoitteet ja valmistustekniikat, Metalliset ja keraamiset pinnoitteet

    Vuoristo, P., 1995, Materiaalitekniikka II: Materiaalinvalinta prosessiteollisuuden vaativiin kohteisiin 7.-8.11.1995, AEL Insko. p. 21 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  77. Published

    Properties of magnetron-sputtered electrically insulating Al2O3 coatings on copper

    Vuoristo, P., Mäntylä, T. & Kettunen, P., 1992, In : Journal of Materials Science. 27, p. 4985-4996

    Research output: Contribution to journalArticleScientificpeer-review

  78. Published

    Titaanidioksidijauheiden ominaisuudet ja soveltuminen termiseen ruiskutukseen

    Vuoristo, P., Sorsa, P. & Niemi, K., 1990, Tampere: Tampereen teknillinen korkeakoulu. 19 p. (Tampereen teknillinen korkeakoulu, Materiaaliopin laitos, Raportti; no. 13/1990)

    Research output: Book/ReportCommissioned reportProfessional

  79. Published

    Termiset ruiskutuspinnoitteet

    Vuoristo, P., 2000, Puun käsittelystä massan valmistukseen, 29.-30.11.200 Lahti, Kunnossapitoyhdistys ry.. p. 25 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  80. Published

    Machining of Stainless Steel Screen Plates with PVD Coated HSS Slot Milling Tools- Experimental Results

    Vuoristo, P., Niemi, K. & Mäntylä, T., 1994, Tampere: Tampere University of Technology. 27 p. (Tampere University of Technology, Institute of Materials Science, Report; no. 50/1994)

    Research output: Book/ReportCommissioned reportProfessional

  81. Published

    Muovien terminen ruiskutus

    Vuoristo, P., 2005, Erikoisseminaari, Muovi- ja elastomeeritekniikan kesäseminaari, 9.-10.6.2005, Hotelli Ellivuori, Vammala. p. 7 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  82. Published

    Structure and erosive wear properties of tungsten carbide and chromium carbide based coatings deposited by the CDS/HVOF spray system

    Vuoristo, P., Niemi, K., Mäkelä, A. & Mäntylä, T., 1993, Tampere: Tampere University of Technology. 18 p. (Tampere University of Technology, Institute of Materials Science, Report; no. 68/1993)

    Research output: Book/ReportCommissioned reportProfessional

  83. Published

    A Study of Properties of Paton Oxide Powders in Thermal Spraying

    Vuoristo, P., Niemi, K., Mäkelä, A. & Mäntylä, T., 1990, Tampere: Tampereen teknillinen korkeakoulu. 50 p. (Tampereen teknillinen korkeakoulu, Materiaaliopin laitos, Raportti; no. 14/1990)

    Research output: Book/ReportCommissioned reportProfessional

  84. Published

    Sputteroitujen pinnoitteiden jäännösjännityksistä

    Vuoristo, P., 1985, Tampere: Tampereen teknillinen korkeakoulu. 45 p. (Tampereen teknillinen korkeakoulu, Materiaaliopin laitos, Raportti; no. 30/1985)

    Research output: Book/ReportCommissioned reportProfessional

  85. Published

    Properties of TiC-Ni and (Ti,Mo)C-NiCo Coatings Sprayed from Agglomerated and Sintered Powders

    Vuoristo, P., Stenberg, T., Mäntylä, T., Berger, L-M. & Nebelung, M., 1996, Proc. of TS96 Thermal Spraying Conference. Lugscheider, E. (ed.). Dusseldorf: DVS-Berichte Band 175, DVS-Verlag DVS-Berichte Band 175, DVS-Verlag, p. 58-61

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  86. Published

    HVOF- ja detonatioruiskuttamalla valmistettujen kovapinnotteiden ominaisuuksien vertailu - TWI:n tutkimustulokset

    Vuoristo, P. & Mäntylä, T., 1995, Tampere: Tampereen teknillinen korkeakoulu. (Tampereen teknillinen korkeakoulu, Materiaaliopin laitos, Raportti; no. 22/1995)

    Research output: Book/ReportCommissioned reportProfessional

  87. Published

    Thermal Spray Industry and Research in Finland

    Vuoristo, P. & Mäntylä, T., 2000, In : Spraytime. 7, 2, p. 17-18

    Research output: Contribution to journalArticleProfessional

  88. Published

    Optimisation and Monitoring of Spray Parameters by a CCD Camera Based Imaging Thermal Spray Monitor

    Vuoristo, P., Ahmaniemi, S., Nuutinen, S. & Mäntylä, T., 2001, Thermal Spray 2001, New Surfaces for a New Millennium, Proceedings of the International Thermal Spray Conference, 28-30 May 2001, Singapore. Berndt, C. C., Khor, K. A. & Lugschneider, E. F. (eds.). usa: ASM International, p. 727-736

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  89. Published

    Kulumista kestävät paksut pinnoitteet

    Vuoristo, P. & Mäntylä, T., 1997, In : Pintatekniikka. 2, 2, p. 12-21

    Research output: Contribution to journalArticleProfessional

  90. Published

    Abrasion Wear Resistance of Detonation Gun Sprayed Carbide Coatings. Abstract

    Vuoristo, P., Niemi, K., Mäkelä, A. & Mäntylä, T., 1993, 7th International Metallurgy and Materials Congress, May 4-8, Altinpark Expo-Center, Ankara, Turkey 1993.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  91. Published

    High power diode laser HPDL in coating and surface treatment

    Vuoristo, P., Tuominen, J., Latokartano, J., Hayhurst, P., Vihinen, J., Mäntylä, T. & Andersson, P., Nov 2003, TUKEVA Research Programme on Future Mechanical Engineering 2000-2003 : Final Report. Hakalehto, K. & Mattila, M. (eds.). Academy of Finland, p. 168-177 18

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  92. Published

    Corrosion properties of thermally sprayed bond coatings under plasma sprayed chromia coating in sulfuric acid solutions

    Vuoristo, P., Varis, T., Meschini, D., Bolelli, G. & Lusvarghi, L., May 2019, International Thermal Spray Conference and Exposition, ITSC 2019: New Waves of Thermal Spray Technology for Sustainable Growth. Azarmi, F., Lau, Y., Veilleux, J., Widener, C., Toma, F., Koivuluoto, H., Balani, K., Li, H. & Shinoda, K. (eds.). ASM International, p. 923-930 8 p. (Proceedings of the International Thermal Spray Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  93. Published

    Electrochemical studies on artificial Cr- and Fe-oxide layers prepared by sputter deposition

    Virtanen, S., Schmuki, P., Böhni, H., Vuoristo, P. & Mäntylä, T., 1994, Proc. Meeting of the electrochemical Society "Oxide Films on Metals and Alloys", Oct. 1994. p. 9 s.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  94. Published

    Artificial Cr- and Fe-oxide passive layers prepared by sputter deposition

    Virtanen, S., Schmuki, P., Böhni, H., Vuoristo, P. & Mäntylä, T., 1995, In : Journal of the Electrochemical Society. 142, 9, p. 3076-3072

    Research output: Contribution to journalArticleScientificpeer-review

  95. Published

    Kromioksidi- ja zirkomiumoksidipinnoitteet ja niiden fosfaattitiivistys

    Vippola, M., Kumpulainen, E., Niemi, K., Vuoristo, P. & Mäntylä, T., 1994, Tampere: Tampereen teknillinen korkeakoulu. 40 p. (Tampereen teknillinen korkeakoulu, Materiaaliopin laitos, Raportti; no. 48/1994)

    Research output: Book/ReportCommissioned reportProfessional

  96. Published

    Thermogravimetric analysis for aluminum phosphate sealed alumina and chromia coatings

    Vippola, M., Vuorinen, J., Vuoristo, P., Lepistö, T. & Mäntylä, T., 2002, International Thermal Spray Conference, Essen 4.-6.3.2002. Lugscheider, E. (ed.). p. 908-911

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  97. Published

    Aluminum phosphate sealed alumina coating: characterization of microstructure

    Vippola, M., Ahmaniemi, S., Keränen, J., Vuoristo, P., Lepistö, T., Mäntylä, T. & Olsson, E., 2002, In : Materials Science and Engineering. A323, p. 1-8 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  98. Published

    SEM study of aluminum phosphate sealant penetration into plasma-sprayed oxide coatings

    Vippola, M., Vuoristo, P., Lepistö, T. & Mäntylä, T., 2001, Final Programme and Proceedings, 52nd Annual Meeting of the Scandinavian Society for Electron Microscopy, Scandem 2001, June 12-15, Huddinge, Stockholm, Sweden. p. 210-211

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  99. Published

    AEM study of aluminum phosphate sealed plasma sprayed Al2O3 and Cr2O3 coatings

    Vippola, M., Vuoristo, P., Lepistö, T. & Mäntylä, T., 2003, In : Journal of Materials Science Letters. 22, p. 463-466

    Research output: Contribution to journalArticleScientificpeer-review

  100. Published

    Characterization of aluminum phosphate sealed alumina and chromia coatings

    Vippola, M., Vuoristo, P., Mäntylä, T. & Lepistö, T., 2002, In: Lin, H-T. & Singh, M. Ceramic Engineering & Science Proceedings: 26th Annual Conference on Composites, Advanced Ceramics, Materials, and Structures: B, January 13- 18, 2002, Cocoa Beach, Florida. The American Ceramc Society, p. 317-324

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  101. Published

    Microstructural Study of Plasma Sprayed Chromium Oxide Coatings: Effect of Aluminum Phosphate Sealing

    Vippola, M., Ahmaniemi, S., Vuoristo, P., Lepistö, T. & Mäntylä, T., 2001, Thermal Spray 2001, New Surfaces for a New Millennium, Proceedings of the International Thermal Spray Conference, 28-30 May 2001, Singapore. Berndt, C. C., Khor, K. A. & Lugschneider, E. F. (eds.). usa: ASM International, p. 607-612

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  102. Published

    Analytical transmission electron microscopy of phosphate sealed plasma sprayed oxide coatings

    Vippola, M., Ahmaniemi, S., Vuoristo, P., Lepistö, T. & Mäntylä, T., 2002, International Thermal Spray Conference, Essen 4.-6.3.2002. Lugscheider, E. (ed.). p. 755-759

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  103. Published

    Microstructural Study of Aluminium Phosphate-Sealed, Plasma-Srayed Chromium Oxide Coating

    Vippola, M., Ahmaniemi, S., Vuoristo, P., Lepistö, T., Mäntylä, T. & Olsson, E., 2002, In : Journal of Thermal Spray Technology. 11, 2, p. 253-259

    Research output: Contribution to journalArticleScientificpeer-review

  104. Published

    Thermal analysis of plasma sprayed oxide coatings sealed with aluminium phosphate

    Vippola, M., Vuorinen, J., Vuoristo, P., Lepistö, T. & Mäntylä, T., 2002, In : Journal of the European Ceramic Society. 22, p. 1937-1946

    Research output: Contribution to journalArticleScientificpeer-review

  105. Published

    Influence of powder type and properties on ceramic layer deposition by cold spraying

    Veräjänkorva, S., Lagerbom, J. & Vuoristo, P., 2006, Proceedings of the 2006 International Thermal Spray Conference, ITSC2006, 15-18 May Seattle, Washington, USA. Marple, B. R. (ed.). p. 3 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  106. Published

    Novel Method for In-Flight Particle Temperature and Velocity Measurements in Plasma Spraying Using a Single CCD Camera

    Vattulainen, J., Hämäläinen, E., Hernberg, R., Vuoristo, P. & Mäntylä, T., 2001, In : Journal of Thermal Spray Technology. 10, 1, p. 94-104 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  107. Published

    The 2016 Thermal Spray Roadmap

    Vardelle, A., Moreau, C., Akedo, J., Ashrafizadeh, H., Berndt, C. C., Berghaus, J. O., Boulos, M., Brogan, J., Bourtsalas, A. C., Dolatabadi, A., Dorfman, M., Eden, T. J., Fauchais, P., Fisher, G., Gaertner, F., Gindrat, M., Henne, R., Hyland, M., Irissou, E., Jordan, E. H., Khor, K. A., Killinger, A., Lau, Y-C., Li, C-J., Li, L., Longtin, J., Markocsan, N., Masset, P. J., Matejicek, J., Mauer, G., McDonald, A., Mostaghimi, J., Sampath, S., Schiller, G., Shinoda, K., Smith, M. F., Syed, A. A., Themelis, N. J., Toma, F-L., Trelles, J. P., Vassen, R. & Vuoristo, P., Dec 2016, In : Journal of Thermal Spray Technology. 25, 8, p. 1376–1440 65 p.

    Research output: Contribution to journalReview ArticleScientificpeer-review

  108. Published

    Erratum to: The 2016 Thermal Spray Roadmap (Journal of Thermal Spray Technology, (2016), 25, 8, (1376-1440), 10.1007/s11666-016-0473-x)

    Vardelle, A., Moreau, C., Akedo, J., Ashrafizadeh, H., Berndt, C. C., Berghaus, J. O., Boulos, M., Brogan, J., Bourtsalas, A. C., Dolatabadi, A., Dorfman, M., Eden, T. J., Fauchais, P., Fisher, G., Gaertner, F., Gindrat, M., Henne, R., Hyland, M., Irissou, E., Jodoin, B., Jordan, E. H., Khor, K. A., Killinger, A., Lau, Y-C., Li, C-J., Li, L., Longtin, J., Markocsan, N., Masset, P. J., Matejicek, J., Mauer, G., McDonald, A., Mostaghimi, J., Sampath, S., Schiller, G., Shinoda, K., Smith, M. F., Syed, A. A., Themelis, N. J., Toma, F-L., Trelles, J. P., Vassen, R. & Vuoristo, P., 2017, In : Journal of Thermal Spray Technology.

    Research output: Contribution to journalArticleScientificpeer-review

  109. Published

    Microstructure and Properties of TiC-CrNiMo SHS Spray Powder and Thermally Sprayed Coating

    Väisänen, M., Vuoristo, P., Mäntylä, T., Maunu, V., Lintunen, P. & Lintula, P., 2000, Thermal Spray Surface Engineering via Applied Research, Proceedings of the 1st International Thermal Spray Conference, 8-11 May 2000, Montréal, Québec, Canada. Berndt, C. C. (ed.). ASM International, p. 429-434

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  110. Published

    Chlorine corrosion of thermally sprayed coatings at elevated temperatures

    Uusitalo, M., Vuoristo, P. & Mäntylä, T., 2002, International Thermal Spray Conference, Essen 4.-6.3.2002. Lugscheider, E. (ed.). p. 429-434

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  111. Published

    High temperature corrosion of coatings and boiler steels in reducing chlorine-containing atmosphere

    Uusitalo, M., Vuoristo, P. & Mäntylä, T., 2002, In : Surface and Coatings Technology. 161, p. 275-285

    Research output: Contribution to journalArticleScientificpeer-review

  112. Published

    Pinnoitteet kattilalaitoksissa

    Uusitalo, M., Vuoristo, P., Knuutila, J. & Mäntylä, T., 1998, Tampere: Tampereen teknillinen korkeakoulu. 52 p. (Tampereen teknillinen korkeakoulu, Materiaaliopin laitos, Raportti; no. 18/1998)

    Research output: Book/ReportCommissioned reportProfessional

  113. Published

    High Temperature Erosion-Corrosion of Superheater Materials and Coatings in Chlorine Containing Environments

    Uusitalo, M., Kaipiainen, M., Vuoristo, P. & Mäntylä, T., 2001, Materials Science Forum, Part 1 Proceedings of the 5th International Symposium on High Temperature Corrosion and Protection of Materials, Les Embiez, France, May 22-26, 2000. Streiff, R. (ed.). Trans Tech Publications, p. 475-482

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  114. Published

    The Effect of Chlorine on Degradation Mechanisms of Thermal Sprayed Coatings at Elevated Temperatures

    Uusitalo, M., Vuoristo, P. & Mäntylä, T., 2003, Thermal Spray 2003, Advancing the Science and Applying the Technology, Vol. 1, Proceedings of the 2003 International Spray Conference, 5-8 May, Orlando, Florida, USA. Marple, B. R. & Moreau, C. (eds.). ASM International, p. 485-494

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  115. Published

    Elevated temperature erosion-corrosion of thermal sprayed coatings in chlorine containing environments

    Uusitalo, M., Vuoristo, P. & Mäntylä, T., 2002, In : Wear. 252, p. 586-594

    Research output: Contribution to journalArticleScientificpeer-review

  116. Published

    Chlorine corrosion of thermally sprayed coatings at elevated temperatures

    Uusitalo, M., Vuoristo, P. & Mäntylä, T., 2002, Materialas for Advanced Power Engineering 2002, Proceedings of the 7th Liège Conference, Part II. Lecomte-Beckers, J. (ed.). Forschungszentrum Jürlich GmbH, p. 945-956

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  117. Published

    High temperature corrosion of coatings and boiler steels below chlorine-containíng salt deposits

    Uusitalo, M. A., Vuoristo, P. M. J. & Mäntylä, T. A., 2004, In : Corrosion Science. 46, p. 1311-1331

    Research output: Contribution to journalArticleScientificpeer-review

  118. Published

    Corrosion and erosion-corrosion of thermally sprayed coatings at elevated temperatures

    Uusitalo, M., Vuoristo, P. & Mäntylä, T., 2001, VTT Symposium 211, Baltica V, Condition and Life Management for Power Plants, Vol. 1, Hotel Haikko Manor, Porvoo, Finland, June 6 - 8, 2001. Hietanen, S. & Auerkari, P. (eds.). Espoo: VTT, p. 247-261

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  119. Published

    Oxidation resistance of carbides in chlorine-containing atmospheres

    Uusitalo, M., Backman, R., Berger, L-M., Vuoristo, P. & Mäntylä, T., 2002, In : High Temperature Materials and Processes. 21, 5, p. 307-319

    Research output: Contribution to journalArticleScientificpeer-review

  120. Published

    Stability of Carbides in Chlorine-Containing High-Temperature Environments

    Uusitalo, M., Backman, R., Berger, L-M., Vuoristo, P. & Mäntylä, T., 2004, Proceedings of the 8th Conference and Exhibition of the European Ceramic Society, Istanbul, Turkey, June 29-July 3, 2003. Mandal, H. (ed.). p. 497-500

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  121. Published

    High temperature corrosion of coatings and boiler steels in oxidizing chlorine-containing atmosphere

    Uusitalo, M., Vuoristo, P. & Mäntylä, T., 2003, In : Materials Science and Engineering A. A346, p. 168-177

    Research output: Contribution to journalArticleScientificpeer-review

  122. Published

    MCrAlY coatings sprayed with HVOF and VPS processes

    Tuurna, S., Vuoristo, P., Ahmaniemi, S., Mäntylä, T. & Takeuchi, J., 2001, VTT Symposium, Baltica V, Condition and Life Management for Power Plants, Vol. 1, Hotel Haikko Manor, Porvoo, Finland, June 6 - 8, 2001. Hietanen, S. & Auerkari, P. (eds.). Espoo: VTT, p. 163-172

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  123. Published

    Terminen ruiskutus mahdollistaa pintojen moniuloitteisen räätälöinnin

    Turunen, E. & Vuoristo, P., 2007, In : Hitsaustekniikka. 57, 6, p. s. 2

    Research output: Contribution to journalArticleProfessional

  124. Published

    Technological possibilities of laser cladding with the help of powerful fiber lasers

    Turichin, G. A., Zemlyakov, E. V., Pozdeeva, E. Y., Tuominen, J. & Vuoristo, P., 2012, In : Metal Science and Heat Treatment. 54, 3-4, p. 139-144

    Research output: Contribution to journalArticleScientificpeer-review

  125. Published

    Technologiheskie vozmozhnosti lazernoj naplavki s ispolzovaniem moshhnih volokonnih lazerov

    Turichin, G., Zemlyakov, E., Pozdeeva, E., Tuominen, J. & Vuoristo, P., 2012, In : Metallovedenie i Termicheskaya Obrabotka Metallov. 3, p. 35-40

    Research output: Contribution to journalArticleScientificpeer-review

  126. Published

    Properties of Nickel Superalloy Coatings As-Sprayed and with Nd-YAG Laser Remelting

    Tuominen, J., Vuoristo, P., Mäntylä, T., Kylmälahti, M., Vihinen, J. & Andersson, P. H., 2000, Thermal Spray Surface Engineering via Applied Research, Proceedings of the 1st International Thermal Spray Conference, 8-11 May 2000, Montreal, Québec, Canada. Berndt, C. C. (ed.). ASM International, p. 589-596

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  127. Published

    Microstructure and dry sliding wear properties of laser clad tribaloy coatings

    Tuominen, J., Vuoristo, P. & Mäntylä, T., 2004, Proceedings of the 1st Pacific International Conference on Application of Lasers and Optics PICALO 2004, April 19-21, 2004, Melbourne, Australia. p. 13-17

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  128. Published

    Corrosion Resistant Nickel Superalloy Coatings Laser-Clad with a 6 kW High Power Diode Laser (HPDL)

    Tuominen, J., Honkanen, M., Hovikorpi, J., Vihinen, J., Vuoristo, P. & Mäntylä, T., 2002, , First International Symposium on High-Power Laser Macroprocessing. International Congress on Laser Advanced Materials Processing LAMP2002, May 27-31,2002, Osaka University Convention Center, Osaka, Japan, Proceedings of SPIE. Miyamoto, I. & Kobayashi, K. F. E. (eds.). SPIE, p. 59-64

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  129. Published

    Improving Corrosion Properties of High-Velocity Oxy-Fuel Sprayed Inconel 625 by Using a High-Power Continuous Wave Neodymium-Doped Yttrium Aluminium Garnet Laser

    Tuominen, J., Vuoristo, P., Mäntylä, T., Kylmälahti, M., Vihinen, J. & Andersson, P. H., 2000, In : Journal of Thermal Spray Technology. 9, 4, p. 513-519

    Research output: Contribution to journalArticleScientificpeer-review

  130. Published

    Fatigue behavior of laser clad round steel bars

    Tuominen, J., Näkki, J., Poutala, J., Miettinen, J., Peltola, T., Vuoristo, P., Rasehorn, I., Alam, M. M. & Kaplan, A. F. H., 2014, In : Journal of Laser Applications. p. 1-10 10 p., 012006.

    Research output: Contribution to journalArticleScientificpeer-review

  131. Published

    Comparison of CO2 and High Power Diode Laser (HPDL) Cladding

    Tuominen, J., Laurila, J., Vihinen, J., Vuoristo, P., Mäntylä, T., Olaussen, L. & Peltola, T., 2002, ICALEO 2002, 21st International Congress on Applications of Lasers & Electro-Optics, October 14-17, 2002, Double Tree Paradise Valley Resort, Scottsdale, Arizona USA. p. 9 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  132. Published

    Corrosion Behavior of HVOF-Sprayed and Nd-YAG Laser-Remelted High-Chromium Coatings

    Tuominen, J., Vuoristo, P., Mäntylä, T., Ahmaniemi, S., Vihinen, J. & Andersson, P. H., 2002, In : Journal of Thermal Spray Technology. 11(2), p. 233-243

    Research output: Contribution to journalArticleScientificpeer-review

  133. Published

    Induction heating unit equipped with closed-loop pid controller; versatile tool in laser cladding

    Tuominen, J. & Vuoristo, P., 2007, 26th International Congress on Applications of Lasers & Electro-optics, ICALEO, 29.10.-1.11.2007, Orlando, USA. p. 1097-1104

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  134. Published

    Residual stresses in HPDL and Nd:YAG laser cladded coatings

    Tuominen, J., Vuoristo, P. & Mäntylä, T., 2005, 24th International Congress on Applications of Lasers & Electro-Optics ICALEO 2005, Miami, Florida, USA, October 31 - November 3, 2005. p. 635-639

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  135. Published

    Fatigue properties of laser clad round steel bars

    Tuominen, J., Näkki, J., Poutala, J., Miettinen, J., Peltola, T., Vuoristo, P., Rasehorn, I., Alam, M. & Kaplan, A., 2013, Proceedings of 32nd International Congress on Applications of Lasers & Electro-Optics ICALEO, October 6-10, 2013, Miami, FL, USA. Laser Institute of America, p. 998-1007 10 p. P140. (International Congress on Applications of Lasers and Electro-Optics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  136. Published

    Fully closed-loop semi-automatic laser cladding cell in a serial production of small tools

    Tuominen, J., Latokartano, J. & Vuoristo, P., 2008, Proceedings of 27th International Congress on Applications of Lasers & Electro-Optics ICALEO, 20-23 October, 2008, Temecula, USA. p. 85-93

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  137. Published

    Corrosion Properties of HVOF Sprayed and Nd-YAG Laser Remelted High-Chromium Nickel-Chromium Coatings

    Tuominen, J., Vuoristo, P., Mäntylä, T. & Ahmaniemi, S., 2001, Thermal Spray 2001, New Surfaces for a New Millennium, Proceedings of the International Thermal Spray Conference, 28-30 May 2001, Singapore. Berndt, C. C., Khor, K. A. & Lugschneider, E. F. (eds.). usa: ASM International, p. 1203-1212

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  138. Published

    Deposition of thick wear and corrosion resistant coatings by high power diode laser

    Tuominen, J., Latokartano, J., Vihinen, J., Vuoristo, P., Mäntylä, T., Naumann, T., Scharek, S., Berger, L-M. & Nowotny, S., 2006, Proceedings of the 2006 International Thermal Spray Conference, ITSC2006, 15-18 May Seattle, Washington, USA. Marple, B. R. (ed.). p. 3 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  139. Published

    Improving corrosion properties of HVOF sprayed nickel-based superalloys by using high power continuous wave Nd:YAG laser

    Tuominen, J., Vuoristo, P. & Mäntylä, T., 2001, Proceedings of the 8th Seminar of the International Federation for Heat Treatment and Surface Engineering IFHTSE 2001, Dubrovnik - Cavtat, Croatia, 12-14 September 2001. Zagreb, Croatia: CSHTSE, p. 185-192

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  140. Published

    Microstructure and corrosion behvior of high power diode laser deposited Inconel 625 coatings

    Tuominen, J., Vuoristo, P., Mäntylä, T., Latokartano, J., Vihinen, J. & Andersson, P. H., 2003, In : Journal of Laser Applications. 15, 1, p. 55-61

    Research output: Contribution to journalArticleScientificpeer-review

  141. Published

    High Deposition Rate Laser Cladding - Recent Advancements

    Tuominen, J., Näkki, J., Pajukoski, H., Peltola, T. & Vuoristo, P., 2013, In : www.lia.org/laserinsights.

    Research output: Contribution to journalArticleProfessional

  142. Published

    Back reflection in direct high power diode laser (HPDL) cladding

    Tuominen, J., Latokartano, J., Vihinen, J. & Vuoristo, P., 2009, 5th International Congress on Laser Advanced Materials Processing, LAMP2009, June 29-July 2, 2009, Kobe, Japan. p. 4 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  143. Published

    Hot Corrosion Resistant Laser Coatings in Diesel Engine

    Tuominen, J., Honkanen, M., Uusitalo, M., Ahmaniemi, S., Vuoristo, P. & Mäntylä, T., 2007, Proceedings of the 2007 International Thermal Spray Conference, May 14-16. 2007, Beijing, China. Marple, B. R., Hyland, M. M., Lau, Y-C., Li, C-J., Lima, R. S. & Montavon, G. (eds.). p. 1099-1104

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  144. Published

    Corrosion resistant laser coatings for hydraulic piston rods

    Tuominen, J., Näkki, J., Junkala, J., Miettinen, J., Peltola, T. & Vuoristo, P., 2012, Proceedings of the 31st International Congress on Applications of Lasers & Electro-Optics, ICALEO, September 23-27, 2012, Anaheim, California, USA. Laser Institute of America, p. 1202-1210 (International Congress on Applications of Lasers & Electro-Optics; vol. 105).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  145. Published

    Laser cladding with 15 kW fiber laser

    Tuominen, J., Näkki, J., Pajukoski, H., Peltola, T., Vuoristo, P., Kuznetsov, M., Pozdeeva, E., Zemlyakov, E. & Turichin, G., 2011, 13th NOLAMP Conference, 13th Conference on Laser Materials, Processing in the Nordic Countries, 27 - 29 June 2011, Trondheim, Norway. Halmöy, E. (ed.). Trondheim: Norwegian University of Sciecne and Technology, p. 1-12 12 p. (NOLAMP Conference, Conference on Laser Materials, Processing in the Nordic Countries).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  146. Published

    Recent developments in high power laser cladding techniques

    Tuominen, J., Näkki, J., Pajukoski, H., Peltola, T. & Vuoristo, P., 2012, Proceedings of the 31st International Congress on Applications of Lasers & Electro-Optics, ICALEO, September 23-27, 2012, Anaheim, California, USA. Laser Institute of America, p. 192-196 (International Congress on Applications of Lasers & Electro-Optics; vol. 105).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  147. Published

    Wear and corrosion resistant laser coatings for hydraulic piston rods

    Tuominen, J., Näkki, J., Pajukoski, T., Miettinen, J., Peltola, T. & Vuoristo, P., May 2015, In : Journal of Laser Applications. 27, 2, p. 022009-1 - 022009-12 12 p., 022009.

    Research output: Contribution to journalArticleScientificpeer-review

  148. Published

    High performance wear and corrosion resistant coatings by novel cladding techniques

    Tuominen, J., Näkki, J., Pajukoski, H., Nyyssönen, T., Ristonen, T., Peltola, T. & Vuoristo, P., Jan 2015, Surface Modification Technologies XXVIII: Proceedings of the 28th International Conference on Surface Modification Technologies. Sudarshan, T. S., Vuoristo, P. & Koivuluoto, H. (eds.). Valardocs, p. 105-117 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  149. Published

    Microstructural and abrasion wear characteristics of tool steel coatings manufactured by laser cladding

    Tuominen, J., Näkki, J., Pajukoski, H., Peltola, T. & Vuoristo, P., Jan 2015, Surface Modification Technologies XXVIII: Proceedings of the 28th International Conference on Surface Modification Technologies . Sudarshan, T. S., Vuoristo, P. & Koivuluoto, H. (eds.). Valardocs, p. 171-182 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  150. Published

    Comparison of multifeed and off-axis high-power diode laser (HPDL) cladding (Invited paper)

    Tuominen, J., Hayhurst, P., Eronen, V., Vuoristo, P. & Mäntylä, T., 18 Jun 2003, Proceedings of SPIE 4973; 06/2003: High-Power Diode Laser Technology and Applications. SPIE

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  151. Published

    Influence of substrate material on corrosion properties of nickel superalloy coatings obtained by laser cladding

    Tuominen, J., Vuoristo, P. & Mäntylä, T., 13 Aug 2001, 8th NOLAMP Conference, 13-15th August 2001, Copenhagen, Denmark: 8th Conference on Laser Materials Processing in the Nordic Countries. Olsen, F. O. & Kristensen, J. K. (eds.). Copenhagen, Vol. Vol. II. p. 269-276

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  152. Published

    Corrosion behaviour of high power diode laser (HPDL) deposited, PTA welded and HVOF sprayed Inconel 625 coatings

    Tuominen, J., Vuoristo, P., Latokartano, J., Mäntylä, T., Vihinen, J. & Andersson, P., 15 Oct 2001, 20th International Congress on Applications of Lasers & Electro-Optics, October 15-18, 2001, Jacksonville, FLA, USA: ICALEO 2001. Laser Institute of America

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  153. Published

    Microstructural and abrasion wear characteristics of laser-clad tool steel coatings

    Tuominen, J., Näkki, J., Pajukoski, H., Hyvärinen, L. & Vuoristo, P., 2016, In : Surface Engineering. 32, 12, p. 923-933 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  154. Published

    Sliding wear performance of metallic laser coatings against composite PTFE seals

    Tuominen, J., Pajukoski, H., Vuoristo, P., Thieme, S., Nowotny, S. & Näkki, J., 1 Oct 2018, In : MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK. 49, 10, p. 1263-1277 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  155. Published

    Laser Strip Cladding for Large Area Metal Deposition

    Tuominen, J., Kaubisch, M., Thieme, S., Näkki, J., Nowotny, S. & Vuoristo, P., 15 Mar 2019, In : Additive Manufacturing. 27, p. 208-216 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  156. Published

    Preparation and properties of flame sprayed glass coatings

    Troadec, G., Vuoristo, P. & Mäntylä, T., 1996, Tampereen teknillinen korkeakoulu. 28 p. (Tampereen teknillinen korkeakoulu, Materiaalitekniikan osasto, Materiaaliopin laitos, Raportti; no. 1996/25)

    Research output: Book/ReportCommissioned reportProfessional

  157. Published

    On-Line Monitoring Assisted Spray Process Optimization of Thermal Barrier Coatings

    Tricoire, A., Legros, E., Vardelle, A., Ahmaniemi, S., Vuoristo, P. & Mäntylä, T., 2003, Thermal Spray 2003, Advancing the Science and Applying the Technology, Vol. 2, Proceedings of the 2003 International Spray Conference, 5-8 May, Orlando, Florida, USA. Marple, B. R. & Moreau, C. (eds.). ASM International, p. 1213-1220

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  158. Published

    Ruostumattomien terästen kiillotusmenetelmät

    Tiittanen, J., Vuoristo, P., Niemi, K. & Mäntylä, T., 1994, Tampere: Tampereen teknillinen korkeakoulu. 23 p. (Tampereen teknillinen korkeakoulu, Materiaaliopin laitos, Raportti; no. 35/1994)

    Research output: Book/ReportCommissioned reportProfessional

  159. Published

    Microstructure and Properties of Thermally Sprayed Silicon Nitride-Based Coatings

    Thiele, S., Heimann, R. B., Berger, L-M., Hermann, M., Nebelung, M., Schnick, T., Wielage, B. & Vuoristo, P., 2002, In : Journal of Thermal Spray. 11(2), p. 218-224

    Research output: Contribution to journalArticleScientificpeer-review

  160. Published

    Corrosion properties of thermally sprayed in-situ laser remelted Ni-based coatings

    Suutala, J., Tuominen, J. & Vuoristo, P., 2005, 24th International Congress on Applications of Lasers & Electro-Optics ICALEO 2005, Miami, Florida, USA, October 31 - November 3, 2005. p. 802-810

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  161. Published

    Manufacturing of corrosion resistant coatings using laser assisted thermal spraying

    Suutala, J., Tuominen, J. & Vuoristo, P., 2006, Proceedings of the 2006 International Thermal Spray Conference, ITSC2006, 15-18 May Seattle, Washington, USA. Marple, B. R. (ed.). p. 6 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  162. Published

    Evaluation of laser remelting parameters for laser-assisted thermal spray process

    Suutala, J., Tuominen, J. & Vuoristo, P., 2005, Lasers in Manufacturing 2005, Proceedings of the Third International WLT-Conference, Munich, Germany, June 13th-16th, 2005. Beyer, E. (ed.). p. 379-384

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  163. Published

    Laser-assisted spraying and laser treatment of thermally sprayed coatings

    Suutala, J., Tuominen, J. & Vuoristo, P., 2006, In : Surface and Coatings Technology. 201, p. 1981-1987

    Research output: Contribution to journalArticleScientificpeer-review

  164. Published

    Laser remelting of thermally sprayed coatings by various types of laser beam profiles

    Suutala, J., Tuominen, J. & Vuoristo, P., 2005, The 10th Nordic Laser Materials Processing Conference, 17-19 August, 2005, Luleå, Sweden. Kaplan, A. (ed.). p. 287-294

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  165. Published

    Laser assisted spraying and laser treatment of thermally sprayed coatings

    Suutala, J., Tuominen, J. & Vuoristo, P., 2005, The 2nd International Meeting on Thermal Spraying, Lille, France, 1-2 December. p. 143-154

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  166. Laser treatment of PVD coated carbon steels and powder steels

    Surzhenkov, A., Kulu, P., Gregor, A., Vuoristo, P., Latokartano, J. & Rupponen, M., 2008, In : Materials Science: Medziagotyra. 14, 4, p. 301-305

    Research output: Contribution to journalArticleScientificpeer-review

  167. Published

    Effect of Powder Manufacturing Method, Particle Size and Binder Content on the Properties of TiC-Ni Composite Coatings

    Stenberg, T., Niemi, K., Vuoristo, P., Vuorinen, J., Mäntylä, T. & Tiainen, T., 1995, Proc. of ITSC '95 (International Thermal Spray Conference '95), Kobe, Japan, 22.-26.5.1995. Osaka, Japan, p. 1145-1150

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  168. Published

    Preparation and Properties of TiC-Ni Composite Coatings

    Stenberg, T. H., Niemi, K. J., Vuoristo, P. M. J. & Mäntylä, T. A., 1992, Proc. Int. Thermal Spray Conference, Orlando, Florida, USA, May 28 - June 5, 1992. p. 661-666

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  169. Published

    Detonation Gun Sprayed TiC-Ni Composite Coating from Mechanically Alloyed Powders

    Stenberg, T. H., Vuorinen, J. E., Niemi, K. J., Vuoristo, P. M. J., Mäntylä, T. A. & Tiainen, T. J., 1993, Plansee Proceedings. Bildstein, H. & Eck, R. (eds.). Reutte: Plansee Metal AG, p. 424-434

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  170. Published

    Characterisation of r.f. sputtered Fe-Cr-oxide films

    Stenberg, T., Keränen, J., Vuoristo, P., Mäntylä, T., Virtanen, S., Schmuki, P., Büchler, M. & Böhni, H., 1999, In : Vacuum. 52, p. 477-483

    Research output: Contribution to journalArticleScientificpeer-review

  171. Published

    Characterization of r.f.-sputtered iron oxide films for modeling passive films

    Stenberg, T., Vuoristo, P., Keränen, J., Mäntylä, T., Buchler, M., Virtanen, P., Schmuki, P. & Böhni, H., 1998, In : Thin Solid Films. 312, 1-2, p. 52-66

    Research output: Contribution to journalArticleScientificpeer-review

  172. Published

    Optimization of detonation gun spraying parameters and microstructure of boride based cermet coatings

    Stenberg, T., Keränen, J., Vuoristo, P., Niemi, K., Mäntylä, T. & Lepistö, T., 1996, TS96 Thermal Spray Conference. E., L. (ed.). Dusseldorf: DVS-Berichte Band 175, DVS-Verlag, p. 254-257

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  173. Published

    Esimetalloidun hiomakivisegmentin liittäminen metalliin

    Sorsa, P., Vuoristo, P., Niemi, K. & Mäntylä, T., 1992, Tampereen teknillinen korkeakoulu. 20 p. (Tampereen teknillinen korkeakoulu, Materiaalioppi, Raportti; no. 52/1992)

    Research output: Book/ReportCommissioned reportProfessional

  174. Published

    Paksut keraamiset pinnoitteet korroosionestossa

    Sorsa, P. & Vuoristo, P., 1990, Tampereen teknillinen korkeakoulu. 24 p. (Tampereen teknillinen korkeakoulu, Materiaaliopin laitos, Raportti; no. 11/1990)

    Research output: Book/ReportCommissioned reportProfessional

  175. Published

    Painehiomakoneen hiomakivisegmentin esimetallointi plasma- ja detonaatioruiskuttamalla

    Sorsa, P., Niemi, K., Vuoristo, P. & Mäntylä, T., 1992, Tampereen teknillinen korkeakoulu. 24 p. (Tampereen teknillinen korkeakoulu, Materiaalioppi, Raportti; no. 19/1992)

    Research output: Book/ReportCommissioned reportProfessional

  176. Published

    Kumimuottien likaantumiseen vaikuttavat tekijät

    Sorsa, P., Vuoristo, P. & Mäntylä, T., 1994, Tampere: Tampereen teknillinen korkeakoulu. 45 p. (Tampereen teknillinen korkeakoulu, Materiaaliopin laitos, Raportti; no. 23/1994)

    Research output: Book/ReportCommissioned reportProfessional

  177. Published

    Keraamiset erikoisjauheet ja niiden käsittely (loppuraportti)

    Silvonen, J., Levänen, E., Nikkilä, A-P., Vuoristo, P. & Mäntylä, T., 2001, Tampere: TTKK. 122 p. (Tampereen Teknillinen Korkeakoulu, Materiaaliopin laitos, Raportti; no. 8)

    Research output: Book/ReportCommissioned reportProfessional

  178. Published

    Electrochemical Method for Evaluation the Corrosion Resistance and Porosity of Thermal Sprayed Coatings

    Siitonen, P., Chen, S. L., Niemi, K. & Vuoristo, P., 1992, Proc. Int. Thermal Spray Conference, Orlando, Florida, USA, May 28 - June 5, 1992. p. 853-858

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  179. Published

    Electrochemical Method for Evaluation the Quality of Thermally Sprayed Ceramic Coatings

    Siitonen, P., Sorsa, P., Niemi, K. & Vuoristo, P., 1992, 12th Scandinavian Corrosion Congress & Eurocorr '92, Espoo, Finland, May 31 - June 4, 1992. p. 363-372

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  180. Published

    Magnesium ja magnesiumseokset

    Siitonen, P. & Vuoristo, P., 1985, Raaka-ainekäsikirja 3 Kuparit, kevytmetallit. Rautpohja: Valmet, p. 227-252

    Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

  181. Published

    Kovuutta pintaan keraamisilla pinnoitteilla

    Siitonen, P. & Vuoristo, P., 1989, In : Teollinen Pinnoitus. 5, 1

    Research output: Contribution to journalArticleProfessional

  182. Published

    Keraamiset pinnoitteet kovaan kulutukseen

    Siitonen, P. & Vuoristo, P., 1989, In : Teollinen Pinnoitus. 5, 2, p. 14-17

    Research output: Contribution to journalArticleProfessional

  183. Published

    Wear and corrosion behaviour of HVOF and HVAF deposited Cr3C2-NiCr coatings

    Serban, V-A., Hulka, I., Utu, D., Vuoristo, P. & Niemi, K., 2013, In : Metalurgia International. 18, 2, p. 51-56 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  184. Published

    Wear Resistant Thermal Sprayed Composite Coatings Based on Iron Self-Fluxing Alloy and Recycled Cermet Powders

    Sarjas, H., Goljandin, D., Kulu, P., Mikli, V., Surzenkov, A. & Vuoristo, P., 2012, In : Materials Science: Medziagotyra. 18, 1, p. 34-39

    Research output: Contribution to journalArticleScientificpeer-review

  185. Published

    Wear resistance of HVOF sprayed coatings from mechanically activated thermally synthesized Cr3C2–Ni spray powder

    Sarjas, H., Kulu, P., Juhani, K., Viljus, M., Matikainen, V. & Vuoristo, P., 22 Feb 2016, In : Proceedings of the Estonian Academy of Sciences. 65, 2, p. 101-106

    Research output: Contribution to journalArticleScientificpeer-review

  186. Published

    Abrasive-Erosive Wear of Thermally Sprayed Coatings from Experimental and Commercial Cr3C2-Based Powders

    Sarjas, H., Surzhenkov, A., Juhani, K., Antonov, M., Adoberg, E., Kulu, P., Viljus, M., Traksmaa, R., Matikainen, V. & Vuoristo, P., 2017, In : Journal of Thermal Spray Technology. 26, 8, p. 2020–2029 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  187. Published

    Infrared Thermography as a Non-destructive Testing Solution for Thermal Spray Metal Coatings

    Santangelo, P. E., Allesina, G., Bolelli, G., Lusvarghi, L., Matikainen, V. & Vuoristo, P., Dec 2017, In : Journal of Thermal Spray Technology. 26, 8, p. 1982–1993 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  188. Published

    Termisesti ruiskutettavat uudet polymeeripinnoitteet

    Rajamäki, E., Vuoristo, P. & Mäntylä, T., 1997, Tampere: Tampereen teknillinen korkeakoulu. 62 p. (Tampereen teknillinen korkeakoulu, Materiaaliopin laitos, Raportti; no. 16/1997)

    Research output: Book/ReportCommissioned reportProfessional

  189. Published

    Effect of Powder Properties suhs as Particle Size, Density and Melt Flow Rate on the Properties of Flame Sprayed PE Coating

    Rajamäki, E., Leino, M., Vuoristo, P., Järvelä, P. & Mäntylä, T., 2000, Thermal Spray Surface Engineering via Applied Research, Proceedings of the 1st International Thermal Spray Conference, 8-11 May 2000, Montreal, Québec,Canada. Berndt, C. C. (ed.). AMS International, p. 281-287

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  190. Published

    Alumiinisen juoksupyörän korroosiosuojapinnoitteet

    Rajamäki, E., Vuoristo, P. & Mäntylä, T., 1997, Tampere: Tampereen teknillinen korkeakoulu. 19 p. (Tampereen teknillinen korkeakoulu, Materiaaliopin laitos, Raportti; no. 6/1997)

    Research output: Book/ReportCommissioned reportProfessional

  191. Published

    Pumppujen pinnoitteet

    Rajamäki, E., Niemi, K., Vuoristo, P. & Mäntylä, T., 1994, Tampere: Tampereen teknillinen korkeakoulu. 64 p. (Tampereen teknillinen korkeakoulu, Materiaaliopin laitos, Raportti; no. 5/1994)

    Research output: Book/ReportCommissioned reportProfessional

  192. Published

    Kuparimetallien pintakäsittely ja lakkaus

    Rajamäki, E., Knuuttila, J., Vuoristo, P. & Mäntylä, T., 1996, Tampere: Tampereen teknillinen korkeakoulu. (Tampereen teknillinen korkeakoulu, Materiaaliopin laitos, Raportti; no. 1996/14)

    Research output: Book/ReportCommissioned reportProfessional

  193. Published

    Formation and structure of plasma sprayed manganese-cobalt spinel coatings on preheated metallic interconnector plates

    Puranen, J., Lagerbom, J., Hyvärinen, L., Mäntylä, T., Levänen, E., Kylmälahti, M. & Vuoristo, P., 2010, In : Surface and Coatings Technology. 205, 4, p. 1029-1033

    Research output: Contribution to journalArticleScientificpeer-review

  194. Published

    The structure and properties of plasma sprayed Fe doped manganese cobalt oxide spinel coatings for SOFC metallic interconnectors

    Puranen, J., Lagerbom, J., Hyvärinen, L., Kylmälahti, M. & Vuoristo, P., 2010, ITSC2010, International Thermal Spray Conference & Exposition, 3.-5.5.2010, Singapore. p. 1-5 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  195. Published

    Manganese-cobolt spinel coatings for SOFC metallic interconnects manufactured by conventional plasma spraying (PS) and suspension plasma spraying (SPS)

    Puranen, J., Hyvärinen, L., Lagerbom, J., Kylmälahti, M., Koivuluoto, H. & Vuoristo, P., 2011, Proceedings of the ASME 2011 9th Fuel Cell Science, Engineering and Technology Conference, FuelCell2011, August 7-10. 2011, Washington, DC, USA. New York, NY: ASME, p. 1-8 8 p. (ASME Fuel Cell Science, Engineering and Technology Conference FuelCell).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  196. Published

    The Structure and Properties of Plasma Sprayed Iron Oxide Doped Manganese Cobalt Oxide Spinel Coatings for SOFC Metallic Interconnectors

    Puranen, J., Lagerbom, J., Hyvärinen, L., Kylmälahti, M., Himanen, O., Pihlatie, M., Kiviaho, J. & Vuoristo, P., 2011, In : Journal of Thermal Spray Technology. 20, 1-2, p. 154-159

    Research output: Contribution to journalArticleScientificpeer-review

  197. Published

    Influence of powder composition and manufacturing method on electrical and chromium barrier properties of atmospheric plasma sprayed spinel coatings prepared from MnCo2O4 and Mn2CoO4 + Co powders on Crofer 22 APU interconnectors

    Puranen, J., Pihlatie, M., Lagerbom, J., Salminen, T., Laakso, J., Hyvärinen, L., Kylmälahti, M., Himanen, O., Kiviaho, J. & Vuoristo, P., 2014, In : International Journal of Hydrogen Energy. 39, 30, p. 17246-17257 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  198. Published

    Suspension plasma spraying (SPS) of manganese-cobolt spinel coatings

    Puranen, J., Hyvärinen, L., Lagerbom, J., Kylmälahti, M., Koivuluoto, H. & Vuoristo, P., 2011, ITSC 2011, International Thermal Spray Conference & Exposition, September 27 - 29, 2011, Hamburg. DVS-Berichte. Dusseldorf: DVS Media GmbH, p. 1-6 6 p. (International Thermal Spray Conference & Exposition ITSC; vol. 276).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  199. Published

    Characterization of High-Velocity Solution Precursor Flame-Sprayed Manganese Cobalt Oxide Spinel Coatings for Metallic SOFC Interconnectors

    Puranen, J., Laakso, J., Kylmälahti, M. & Vuoristo, P., 2013, In : Journal of Thermal Spray Technology. 22, 5, p. 622-630 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  200. Published

    Influence of Spray Parameters and Characteristics of Solutions on Microstructure and Phase Composition of Solution Precursor Atmospheric Plasma Sprayed (SPPS) Mn-Co Spinel Coating

    Puranen, J., Laakso, J., Hyvärinen, L., Kylmälahti, M. & Vuoristo, P., 2012, Thermal Spray 2012: Proceedings from the International Thermal Spray Conference and Exposition, May 21-24, 2012, Houston, Texas, USA. Lima, R. S., Agarwal, A., Hyland, M. M., Lau, Y-C., Li, C-J., McDonald, A. & Toma, F-L. (eds.). ASM International, p. 810-815 (International Thermal Spray Conference and Exposition).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  201. Published

    Post-mortem evaluation of oxidized atmospheric plasma sprayed Mn-Co-Fe oxide spinel coatings on SOFC interconnectors

    Puranen, J., Pihlatie, M., Lagerbom, J., Giovanni, B., Laakso, J., Hyvärinen, L., Kylmälahti, M., Himanen, O., Kiviaho, J., Lusvarghi, L. & Vuoristo, P., 2014, In : International Journal of Hydrogen Energy. 39, 30, p. 17284-17294 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  202. Published

    High temperature oxidation tests for the high velocity solution precursor flame sprayed manganese-cobalt oxide spinel protective coatings on SOFC interconnector steel

    Puranen, J., Laakso, J., Honkanen, M., Heinonen, S., Kylmälahti, M., Lugowski, S., Coyle, T. W., Kesler, O. & Vuoristo, P., 18 May 2015, In : International Journal of Hydrogen Energy. 40, 18, p. 6216-6227 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  203. Published

    High temperature oxidation behaviour of MNCO2O4 coating on crofer 22 APU manufactured by a novel solution precursor plasma spray process (SPPS)

    Puranen, J., Laakso, J., Hyvärinen, L., Kylmälahti, M. & Vuoristo, P., 2012, ASME 2012 10th International Conference on Fuel Cell Science, Engineering and Technology Collocated with the ASME 2012 6th International Conference on Energy Sustainability, FUELCELL 2012. The American Society of Mechanical Engineers ASME, p. 213-218 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  204. Published

    Manganese-cobalt spinel coatings for SOFC metallic interconnects manufactured by conventional plasma spraying (PS) and suspension plasma spraying (SPS)

    Puranen, J., Hyvärinen, L., Lagerbom, J., Kylmälahti, M., Koivuluoto, H. & Vuoristo, P., 2011, ASME 2011 9th International Conference on Fuel Cell Science, Engineering and Technology. Collocated with ASME 2011 5th International Conference on Energy Sustainability, FUELCELL 2011. p. 237-244 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  205. Published

    YBa2Cu3O7 Thin-Film Superconductors on Copper Substrates by Radio-Frequency Magnetron Sputtering

    Podkletnov, E. E., Järvinen, R. J. O., Vuoristo, P. M. J., Mäntylä, T. A. & Kettunen, P. O., 1992, In : Journal of Materials Science Letters. 11, p. 202-204

    Research output: Contribution to journalArticleScientificpeer-review

  206. Published

    Functionalizing Surface Electrical Potential of Hydroxyapatite Coatings

    Pluduma, L., Freimanis, E., Gross, K., Koivuluoto, H., Algate, K., Haynes, D. & Vuoristo, P., 2016, 11th International Conference Medical Applications of Novel Biomaterials and Nanotechnology. Vol. 102. p. 12-17 6 p. (Advances in Science and Technology; vol. 102).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  207. Published

    Education and Materials Joining Research methods at Tampere University of Technology

    Peura, P., Vuoristo, P. & Vihinen, J., Jun 2015, In : Hitsaustekniikka. 65, 2-3/2015, p. 73-76 4 p.

    Research output: Contribution to journalArticleProfessional

  208. Published

    Laser cladding with coaxial wire feeding

    Pajukoski, H., Näkki, J., Thieme, S., Tuominen, J., Nowotny, S. & Vuoristo, P., 2012, Proceedings of the 31st International Congress on Applications of Lasers & Electro-Optics, ICALEO, September 23-27, 2012, Anaheim, California, USA. Laser Institute of America, p. 1196-1201 (International Congress on Applications of Lasers & Electro-Optics; vol. 105).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  209. Published

    Processing and properties of duplex stainless steel coatings manufactured by coaxial hot-wire laser cladding

    Pajukoski, H., Näkki, J., Thieme, S., Tuominen, J., Nowotny, S. & Vuoristo, P., 2013, Proceedings of 32nd International Congress on Applications of Lasers & Electro-Optics ICALEO, October 6-10, 2013, Miami, FL, USA. Laser Institute of America, p. 978-984 7 p. P135. (International Congress on Applications of Lasers and Electro-Optics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  210. Published

    High performance corrosion resistant coatings by novel coaxial cold- and hot-wire laser cladding methods

    Pajukoski, H., Näkki, J., Thieme, S., Tuominen, J., Nowotny, S. & Vuoristo, P., 2016, In : Journal of Laser Applications. 28, 1, 012011.

    Research output: Contribution to journalArticleScientificpeer-review

  211. Published

    The Study of the Possibility of Application of Thin Alumina Coatings to Improve the Insulation Characteristics of MHD Channel

    Pahomov, E. P., Podkljetnov, E. E., Romanov, A. I., Smornova, L. G., Tikhotsky, A. S., Zalkind, V. I., Kettunen, P. O., Mäntylä, T. A., Telama, A. K., Vuoristo, P. M. J., Dudko, D. J., Jakovlev, V. S. & Miroschnichenko, A. A., 1987, Proc. of the 25th Symposium on Engineering Aspects of Magnetohydrodynamics, Betjesda, Maryland, June 24-26. Betjesda, p. s. 3.3.1-13 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  212. Published

    A Microstructural Study of HVOF and VPS Sprayed MCrAlY Coatings

    Nuutinen, S., Vuoristo, P., Ahmaniemi, S. & Mäntylä, T., 2001, Thermal Spray 2001, New Surfaces for a New Millennium, Proceedings of the International Thermal Spray Conference, 28-30 May 2001, Singapore. Berndt, C. C., Khor, K. A. & Lugschneider, E. F. (eds.). usa: ASM International, p. 661-670

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  213. Published

    Comparison of laser cladding with powder and hot and cold wire techniques

    Nurminen, J., Riihimäki, J., Näkki, J. & Vuoristo, P., 2006, ICALEO 2006, 25th International Congress on Applications of Lasers & Electro-optics, 30 October-2 November, 2006, Doubletree Paradise Valley Resort, Scottsdale, USA. p. 4 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  214. Published

    On the wear properties of laser coatings with high carbide concentrations

    Nurminen, J., Näkki, J. & Vuoristo, P., 2005, 24th International Congress on Applications of Lasers & Electro-Optics ICALEO 2005, Miami, Florida, USA. p. 648-654

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  215. Published

    Hot-wire cladding process studies

    Nurminen, J., Riihimäki, J., Näkki, J. & Vuoristo, P., 2007, 26th International Congress on Applications of Lasers & Electro-optics, ICALEO, 29.10.-1.11.2007, Orlando, USA. p. 947-952

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  216. Published

    Approval criteria for corrosion resistant laser coatings

    Nurminen, J., Näkki, J. & Vuoristo, P., 2005, The 10th Nordic Laser Materials Processing Conference, 17-19 August, 2005, Luleå, Sweden. Kaplan, A. (ed.). p. 205-215

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  217. Published

    The influence of powder parameters on laser cladding process

    Nurminen, J., Näkki, J. & Vuoristo, P., 2004, Proceedings of the 23rd International Congress on Applications of Lasers and Electro-Optics, ICALEO 2004, October 4-7, 2004, San Francisco, USA. p. 5 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  218. Published

    Microstructures and abrasion resistances of laser cladded MMC-coatings

    Nurminen, J., Näkki, J. & Vuoristo, P., 2005, International Thermal Spray Conference & Exposition ITSC 2005, Basel, Swizerland, May 2 - 4, 2005. p. 5 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  219. Published

    Hybrid laser cladding by wire

    Nurminen, J., Riihimäki, J., Näkki, J. & Vuoristo, P., 2007, 11th Nolamp Conference in Laser Processing of Materials, Lappeenranta, Finland, August 20-22, 2007. Acta Universitatis Lappeenrantaensis. Kujanpää, V. (ed.). p. 282-290

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  220. Published

    Laser cladding on cast iron substrates

    Nurminen, J., Näkki, J. & Vuoristo, P., 2005, 24th International Congress on Applications of Lasers & Electro-Optics ICALEO 2005, Miami, Florida, USA, October 31 - November 3, 2005. p. 655-659

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  221. Published

    Microstructure and properties of hard and wear resistant MMC coatings deposited by laser cladding

    Nurminen, J., Näkki, J. & Vuoristo, P., 2009, In : International Journal of Refractory Metals and Hard Materials. 27, 2, p. 472-478

    Research output: Contribution to journalArticleScientificpeer-review

  222. Published

    Some considerations of approval criteria for laser cladding

    Nurminen, J. & Vuoristo, P., 2005, Lasers in Manufacturing 2005, Proceedings of the Third International WLT-Conference, Munich, Germany, June 13th-16th, 2005. Beyer, E. (ed.). p. 339-343

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  223. Published

    HVOF-ruiskutettujen WC+Co-pinnotteiden vierintäväsymistutkimus, loppuraportti

    Nieminen, R., Vuoristo, P. & Mäntylä, T., 1995, Tampere: Tampereen teknillinen korkeakoulu. 65 p. (Tampereen teknillinen korkeakoulu, Materiaaliopin laitos, Raportti; no. 25/1995)

    Research output: Book/ReportCommissioned reportProfessional

  224. Published

    Rolling Contact Fatigue Cracteristics of Thermally Sprayed WC-Co-Coatings

    Nieminen, R., Vuoristo, P., Niemi, K., Mäntylä, T. & Barbezat, G., 1996, TS96 Thermal Spraying Conference. E., L. (ed.). Dusseldorf: DVS-Berichte Band 175, DVS-Verlag, p. 354-359

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  225. Published

    Rolling contact fatigue failure mechanisms in plasma and HVOF sprayed WC-Co coatings

    Nieminen, R., Vuoristo, P., Niemi, K., Mäntylä, T. & Barbezat, G., 1997, In : Wear. 212, p. 66-77

    Research output: Contribution to journalArticleScientificpeer-review

  226. Published

    Rolling Contact Fatigue Characteristics of Thermal Sprayed Tungsten Carbide Coatings

    Nieminen, R., Vuoristo, P., Niemi, K. & Mäntylä, T., 1995, Advances in Thermal Spray Science and Technology, Proc. of the Eight National Thermal Spray Conference, 11-15. September 1995. Berndt, C. C. & Sampath, S. (eds.). ASM International, Materials Park, OH, p. 651-657

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  227. Published

    Influence of chromia alloying on the characteristics of APS and HVOF sprayed alumina coatings

    Niemi, K., Hakalahti, J., Hyvärinen, L., Laurila, J., Vuoristo, P., Berger, L-M., Toma, F-L. & Shakhverdova, I., 2011, ITSC 2011, International Thermal Spray Conference & Exposition, September 27 - 29, 2011, Hamburg. DVS-Berichte. Dusseldorf: DVS Media GmbH, p. 1-6 6 p. (International Thermal Spray Conference & Exposition ITSC; vol. 276).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  228. Published

    Diamond Jet HVOF-menetelmällä ruiskutetun WC-Co-pinnoitteen ominaisuudet

    Niemi, K., Vuoristo, P. & Mäntylä, T., 1992, Tampereen teknillinen korkeakoulu. 9 p. (Tampereen teknillinen korkeakoulu, Materiaalioppi, Raportti; no. 25/1992)

    Research output: Book/ReportCommissioned reportProfessional

  229. Published

    Kovahitsauspinnoitteiden abrasiivinen kulumiskestävyys

    Niemi, K., Vuoristo, P. & Mäntylä, T., 1993, Tampere: Tampereen teknillinen korkeakoulu. 9 p. (Tampereen teknillinen korkeakoulu, Materiaaliopin laitos, Raportti; no. 22/1993)

    Research output: Book/ReportCommissioned reportProfessional

  230. Published

    Properties of Alumina-based coatings deposited by plasma spray and detonation gun spray processes

    Niemi, K., Vuoristo, P., Mäkelä, A. & Mäntylä, T., 1994, In : Journal of Thermal Spray Technology. 3, 2, p. 199-203

    Research output: Contribution to journalArticleScientificpeer-review

  231. Published

    On the Properties of Thermally Sprayed Oxide Ceramic Coatings. Abstract

    Niemi, K., Vuoristo, P. & Mäntylä, T., 1993, 7th International Metallurgy and Materials Congress, May 4-8, Altinpark Expo-Center, Ankara, Turkey 1993.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  232. Published

    Detonaatiopinnoitus

    Niemi, K., Vuoristo, P. & Mäntylä, T., 1989, Tampere: Tampereen teknillinen korkeakoulu. 26 p. (TTKK/Materiaalioppi, Raportti; no. 15)

    Research output: Book/ReportCommissioned reportProfessional

  233. Published

    Properties of Alumina-Based Coatings Deposited by Plasma Spray and Detonation Gun Spray Processes

    Niemi, K., Vuoristo, P. & Mäntylä, T., 1993, In : Journal of Thermal Spray Technology. 2, 4, p. 1-6 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  234. Published

    Properties of Alumina-Zirkonia-Titania and Alumina-Zirkonia-Chromia Coatings Deposited by Plasma Spraying and Detonation Spraying

    Niemi, K., Vuoristo, P., Mäntylä, T., Lugscheider, E., Knuuttila, J. & Jungklaus, H., 1995, Proc. of ITSC '95 (International Thermal Spray Conference '95, Kobe, 22-26 May 1995). Osaka, Japan, p. 675-679

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  235. Published

    Structure and properties of vacuum plasma sprayed oxide coatings

    Niemi, K., Vuoristo, P. & Mäntylä, T., 1992, Tampereen teknillinen korkeakoulu. 9 p. (Tampereen teknillinen korkeakoulu, Materiaalioppi, Report; no. 17/1992)

    Research output: Book/ReportCommissioned reportProfessional

  236. Published

    Evaluation of HVOF coatings deposited by OSU Super Jet System

    Niemi, K., Vuoristo, P. & Mäntylä, T., 1993, Tampere: Tampere University of Technology. 9 p. (Tampere University of Technology, Institute of Materials Science, Report; no. 17/1993)

    Research output: Book/ReportCommissioned reportProfessional

  237. Published

    On the Abrasion Wear Resistance of Thermally Sprayed Carbide Coatings

    Niemi, K., Vuoristo, P., Mäntylä, T., Barbezat, G. & Nicoll, A. R., 1992, Proc. 5th Nordic Symp. on Tribology, Helsinki, Finland, June 8 - 11, 1992. p. 172-181

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  238. Published

    Chromium Oxide Coatings Deposited by Plasma and Detonation Gun Spraying

    Niemi, K. J., Vuoristo, P. M. J. & Mäntylä, T. A., 1991, Proc. 2nd Plasma-Technik-Symposium, Lucerne, Switzerland, June 5-7, 1991. p. 311-322

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  239. Published

    Evaluation of alumina coatings deposited by TopGun HVOF method

    Niemi, K., Vuoristo, P., Mäkelä, A. & Mäntylä, T., 1993, Tampere: Tampere University of Technology. 8 p. (Tampere University of Technology, Institute of Materials Science, Report; no. 42/1993)

    Research output: Book/ReportCommissioned reportProfessional

  240. Published

    Syöttöruuvimateriaalien rakenne ja kuluminen

    Niemi, K., Vuoristo, P. & Mäntylä, T., 1993, Tampere: Tampereen teknillinen korkeakoulu. 12 p. (Tampereen teknillinen korkeakoulu, Materiaaliopin laitos, Raportti; no. 24/1993)

    Research output: Book/ReportCommissioned reportProfessional

  241. Published

    Wear characteristics of oxide coatings deposited by plasma spraying, high power plasma spraying and detonation gun spraying

    Niemi, K., Vuoristo, P., Mäntylä, T., Lugscheider, E., Knuuttila, J. & Jungklaus, H., 1995, Advances in Thermal Spray Science and Technology, Proc. of the Eight National Thermal Spray Conference, 11-15. September 1995. Berndt, C. C. & Sampath, S. (eds.). Materials Park, OH: ASM International, p. 645-650

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  242. Published

    Structure and wear properties of HVOF sprayed cermet and ceramic coatings

    Niemi, K., Vuoristo, P. & Mäntylä, T., 1992, Tampereen teknillinen korkeakoulu. 12 p. (Tampereen teknillinen korkeakoulu, Materiaalioppi, Report; no. 14/1992)

    Research output: Book/ReportCommissioned reportProfessional

  243. Published

    Kovahitsauspinnoitteiden kulumistutkimus

    Niemi, K., Vuoristo, P. & Mäntylä, T., 1994, Tampere: Tampereen teknillinen korkeakoulu. 8 p. (Tampereen teknillinen korkeakoulu, Materiaaliopin laitos, Raportti; no. 3/1994)

    Research output: Book/ReportCommissioned reportProfessional

  244. Published

    Vety-happi -räjähdyskaasuseoksilla detonaatioruiskutettujen WC-Co-pinnoitteiden ominaisuudet

    Niemi, K., Palttala, S., Vuoristo, P. & Mäntylä, T., 1993, Tampere: Tampereen teknillinen korkeakoulu. 19 p. (Tampereen teknillinen korkeakoulu, Materiaaliopin laitos, Raportti; no. 63/1993)

    Research output: Book/ReportCommissioned reportProfessional

  245. Published

    Advanced Oxide Ceramic Coatings for Applications Demanding High Wear Resistance

    Niemi, K., Rekola, S., Vuoristo, P., Laurila, J., Vippola, M. & Mäntylä, T., 2003, Thermal Spray 2003, Advancing the Science and Applying the Technology, Vol. 1, Proceedings of the 2003 International Spray Conference, 5-8 May, Orlando, Florida, USA. Marple, B. R. & Moreau, C. (eds.). ASM International, p. 233-236

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  246. Published

    Thermally sprayed alumina coatings with strongly improved wear and corrosion resistance

    Niemi, K., Sorsa, P., Vuoristo, P. & Mäntylä, T., 1994, Proceedings of the 7th National Thermal Spray Conference NTSC 94, ASM International Materilas Park, OH, USA. p. 533-536

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  247. Published

    On the Abrasive Wear Resistance of Thermally Sprayed Carbide Coatings

    Niemi, K., Vuoristo, P., Mäntylä, T., Barbezat, G. & Nicoll, A. R., 1992, In : Tribologia - Finnish Journal of Tribology. 11, 3, p. 172-181

    Research output: Contribution to journalArticleScientificpeer-review

  248. Published

    Abrasion Wear Resistance of Carbide Coatings Deposited by Plasma and High Velocity Combustion Processes

    Niemi, K., Vuoristo, P., Mäntylä, T., Barbezat, G. & Nicoll, A. R., 1992, Proc. Int. Thermal Spray Conference, Orlando, Florida, USA, May 28 - June 5, 1992. p. 685-690

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  249. Published

    Termisesti ruiskutettujen pinnoitteiden kuumaeroosionkestävyys

    Niemi, K., Vuoristo, P. & Mäntylä, T., 1994, Tampere: Tampereen teknillinen korkeakoulu. 23 p. (Tampereen teknillinen korkeakoulu, Materiaaliopin laitos, Raportti; no. 28/1994)

    Research output: Book/ReportCommissioned reportProfessional

  250. Published

    Properties of alumina based coatings deposited by plasma and high velosity combustion processes

    Niemi, K., Vuoristo, P. & Mäntylä, T., 1993, Thermal Spray Coatings: Research, Design and Applications. Proceedings of 5th National Thermal Spray Conference NTSC '93, June 7.-11, 1993, Anaheim, California, USA. p. 469-474

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  251. Published

    Hypersonisella liekkiruiskutusmenetelmällä valmistetun WC-Co-pinnoitteen ominaisuudet

    Niemi, K., Vuoristo, P., Eerola, J. & Mäntylä, T., 1991, Tampere: Tampereen teknillinen korkeakoulu. 7 p. (Tampereen teknillinen korkeakoulu, Materiaaliopin laitos, Raportti; no. 17/1991)

    Research output: Book/ReportCommissioned reportProfessional

  252. Published

    Comparison of Plasma Sprayed and Detonation Gun Sprayed Alumina-Magnesia and Alumina-Titania Coatings

    Niemi, K., Vuoristo, P., Mäkelä, A., Sorsa, P. & Mäntylä, T., 1992, Proc. 5th Int. Conference on Surface Modification Technologies, Birmingham, UK, Sept. 2-4, 1991. p. 571-580

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  253. Published

    Comparative study of hard coatings deposited by diffusion and thermal spraying techniques

    Niemi, K., Vuoristo, P. & Mäntylä, T., 1991, Tampere: Tampere University of Technology. 10 p. (Tampere University of Technology, Institute of Materials Science, Report; no. 47/1991)

    Research output: Book/ReportCommissioned reportProfessional

  254. Published

    Kestävät pinnoitteet detonaatioruiskutuksella

    Niemi, K. & Vuoristo, P., 1990, In : Hitsaustekniikka. 40, 2, p. 79-80

    Research output: Contribution to journalArticleProfessional

  255. Published

    Evaluation of carbide and oxide coatings deposited by Miller HV-2000 HVOF method

    Niemi, K., Vuoristo, P., Mäkelä, A. & Mäntylä, T., 1993, Tampere: Tampere University of Technology. 16 p. (Tampere University of Technology, Institute of Materials Science, Report; no. 35/1993)

    Research output: Book/ReportCommissioned reportProfessional

  256. Published

    On the wear resistance of thermally sprayed alumina based coatings

    Niemi, K., Vuoristo, P. & Mäntylä, T., 1993, Proceedings of 1993 Thermal Spray Conf. (TS '93), March 3.-5., 1993, Aachen., Federal Republic of Germany. p. 307-309

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  257. Published

    Evaluation of WC + 17% Co coatings deposited by HVOF TopGun system

    Niemi, K., Vuoristo, P., Mäkelä, A. & Mäntylä, T., 1991, Tampere: Tampere University of Technology. 9 p. (Tampere University of Technology, Institute of Materials Science, Report; no. 41/1991)

    Research output: Book/ReportCommissioned reportProfessional

  258. Published

    Evaluation of abrasion wear resistance of HVOF sprayed carbide coatings

    Niemi, K., Vuoristo, P., Eerola, J. & Mäntylä, T., 1991, Tampere: Tampere University of Technology. 7 p. (Tampere University of Technology, Institute of Materials Science, Report; no. 10/1991)

    Research output: Book/ReportCommissioned reportProfessional

  259. Published

    Termisesti ruiskutettujen pinnoitteiden ja kovahitsauspinnoitteiden abrasiivinen kulumiskestävyys

    Niemi, K., Vuoristo, P. & Mäntylä, T., 1993, Tampere: Tampereen teknillinen korkeakoulu. 12 p. (Tampereen teknillinen korkeakoulu, Materiaaliopin laitos, Raportti; no. 41/1993)

    Research output: Book/ReportCommissioned reportProfessional

  260. Published

    Recent Developments in the Characteristics of Thermally Sprayed Oxide Coatings

    Niemi, K., Vuoristo, P., Kumpulainen, E., Sorsa, P. & Mäntylä, T., 1995, Proc. of ITSC'95 (International Thermal Spray Conference '95), Kobe, Japan, 22.-26.5.1995. Osaka, Japan, p. 687-692

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  261. Published

    Selvitys eräiden termisesti ruiskutettujen kovapinnoitteiden soveltuvuudesta kulumissuojaksi abraasiota vastaan

    Niemi, K., Vuoristo, P. & Mäntylä, T., 1992, Tampereen teknillinen korkeakoulu. 11 p. (Tampereen teknillinen korkeakoulu, Materiaalioppi, Raportti; no. 51/1992)

    Research output: Book/ReportCommissioned reportProfessional

  262. Published

    Thermally sprayed slippery and icephobic surfaces

    Niemelä-Anttonen, H., Koivuluoto, H., Kylmälahti, M., Laakso, J. & Vuoristo, P., 2018, ITSC2018-Proceedings of the International Thermal Spray Conference: May 7-10, 2018, Orlando, Florida.. Azarmi, F., Balani, K., Eden, T., Hussain, T., Lau, Y-C., Li, H. & Shinoda, K. (eds.). ASM International, Materials Park, OH, p. 380-384 5 p. (Proceedings of the International Thermal Spray Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  263. Published

    Thermally Sprayed Slippery and Ice Repellent Surfaces

    Niemelä-Anttonen, H., Koivuluoto, H., Kylmälahti, M. & Vuoristo, P., 2018.

    Research output: Other conference contributionPaper, poster or abstractScientific

  264. Published

    Icephobicity of Slippery Liquid Infused Porous Surfaces under Multiple Freeze–Thaw and Ice Accretion–Detachment Cycles

    Niemelä-Anttonen, H., Koivuluoto, H., Tuominen, M., Teisala, H., Juuti, P., Haapanen, J., Harra, J., Stenroos, C., Lahti, J., Kuusipalo, J., Mäkelä, J. M. & Vuoristo, P., Oct 2018, In : Advanced Materials Interfaces. 5, 20

    Research output: Contribution to journalArticleScientificpeer-review

  265. Published

    Study of High Velocity Arc Sprayed heat resistant coatings from FeCrAlBY cored wire

    Nevezhin, S., Fantozzi, D., Malygina, I., Korobov, Y., Milanti, A., Koivuluoto, H., Vuoristo, P., Makarov, A. & Filippov, M., 2016, p. 852-856.

    Research output: Other conference contributionPaper, poster or abstractScientific

  266. Published

    Titanum Suboxide Coatings Prepared by VPS Spraying

    Neumann, T., Berger, L-M., Ingwerth, M. & Vuoristo, P., 2003, Thermal Spray 2003, Advancing the Science and Applying the Technology, Vol. 2, Proceedings of the 2003 International Thermal Spray Conference, 5-8 May, Orlando, Florida, USA. Marple, B. R. & Moreau, C. (eds.). ASM International, p. 1441-1445

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  267. Published

    Highly Porous Deposits of Cr2O3 Prepared by Plasma Co-spraying of Cr2O3 and Al

    Neufuss, K., Kolman, B., Ctibor, P., Chraska, P., Laakso, J., Ahmaniemi, S., Vuoristo, P. & Mäntylä, T., 2003, Thermal Spray 2003, Advancing the Science and Applying the Technology, Vol. 2, Proceedings of the 2003 International Spray Conference, 5-8 May, Orlando, Florida, USA. Marple, B. R. & Moreau, C. (eds.). ASM International, p. 1307-1310

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  268. Published

    The effect of minor alloying elements of alloy 625 on the laser cladding process

    Näkki, J., Tuominen, J., Pajukoski, H. & Vuoristo, P., 2013, Proceedings of 32nd International Congress on Applications of Lasers & Electro-Optics ICALEO, October 6-10, 2013, Miami, FL, USA. Laser Institute of America, p. 606-614 9 p. (International Congress on Applications of Lasers and Electro-Optics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  269. Published

    A comparison of hot cracking sensibility of some alloy 625 powders on laser cladding

    Näkki, J., Tuominen, J. & Vuoristo, P., 2012, Proceedings of 31the International Congress on Applications of Lasers & Electro-Optics, ICALEO, September 23-27, 2012, Anaheim, California, USA. Laser Institute of America, p. 1-9 9 p. (International Congress on Applications of Lasers & Electro-Optics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  270. Published

    Effect of minor elements on solidification cracking and dilution of alloy 625 powders in laser cladding

    Näkki, J., Tuominen, J. & Vuoristo, P., 6 Jan 2017, In : Journal of Laser Applications. 29, 1, p. 1-7 7 p., 012014.

    Research output: Contribution to journalArticleScientificpeer-review

  271. Published

    Effect of suspension characteristics on microstructure of suspension plasma sprayed SiC submicron coatings

    Mubarok, F., Puranen, J., Vuoristo, P., Johnsen, R. & Espallargas, N., 2011, ITSC 2011, International Thermal Spray Conference & Exposition, September 27 - 29, 2011, Hamburg. DVS-Berichte. Dusseldorf: DVS Media GmbH, p. 1-6 6 p. (International Thermal Spray Conference & Exposition ITSC; vol. 276).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  272. Published

    Wear and Corrosion Resistance of High-Velocity Oxygen-Fuel Sprayed Iron-Basec Composite Coatings

    Milanti, A., Koivuluoto, H., Vuoristo, P., Bolelli, G., Bozza, F. & Lusvarghi, L., 2013, Proceedings of the ASME 2013 International Mechanical Engineerig Congress and Exposition, IMECE2013, November 15-21,2013, San Diego, California, USA. ASME, p. 1-11 11 p. 63397. (ASME International Mechanical Engineerig Congress and Exposition).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  273. Published

    Microstructural Characteristics and Tribological Behavior of HVOF-Sprayed Novel Fe-Based Alloy Coating

    Milanti, A., Koivuluoto, H., Vuoristo, P., Bolelli, G., Bozza, F. & Lusvarghi, L., 2014, In : Coatings. 4, 1, p. 98-120 23 p.

    Research output: Contribution to journalArticleScientificpeer-review

  274. Published

    Influence of the spray gun type on microstructure and properties of HVAF sprayed Fe-based corrosion resistant coatings

    Milanti, A., Koivuluoto, H. & Vuoristo, P., 2014, International Thermal Spray Conference, ITSC2014, 21-23 May, 2014, Barcelona, Spain. p. 334-339 6 p. (DVS-Berichte; vol. 302).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  275. Published

    Influence of the Spray Gun Type on Microstructure and Properties of HVAF Sprayed Fe-Based Corrosion Resistant Coatings

    Milanti, A., Koivuluoto, H. & Vuoristo, P., 2015, In : Journal of Thermal Spray Technology. 24, 7, p. 1312-1322 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  276. Published

    Effect of spraying parameters on the microstructural and corrosion properties of HVAF-sprayed Fe-Cr-Ni-B-C coatings

    Milanti, A., Matikainen, V., Koivuluoto, H., Bolelli, G., Lusvarghi, L. & Vuoristo, P., 15 Sep 2015, In : Surface and Coatings Technology. 277, p. 81-90 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  277. Published

    Wear and Corrosion Resistance of High-Velocity Oxygen-Fuel Sprayed Iron-Based Composite Coatings

    Milanti, A., Koivuluoto, H., Vuoristo, P., Bolelli, G., Bozza, F. & Lusvarghi, L., Jan 2015, Surface Modification Technologies XXVIII: Proceedings of the Twenty Eighth International Conference on Surface Modification Technologies. Sudarshan, T. S., Vuoristo, P. & Koivuluoto, H. (eds.). Valardocs, Vol. 28. p. 545-559

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  278. Published

    Microstructure and Sliding Wear Behavior of Fe-Based Coatings Manufactured with HVOF and HVAF Thermal Spray Processes

    Milanti, A., Matikainen, V., Bolelli, G., Koivuluoto, H., Lusvarghi, L. & Vuoristo, P., Jun 2016, In : Journal of Thermal Spray Technology. 25, 5, p. 1040–1055 16 p.

    Research output: Contribution to journalArticleScientificpeer-review

  279. Published

    Influence of the powder morphology and plasma play process parameters on the structure and properties of Al2O3 based plasma sprayed coatings

    Matikainen, V., Koivuluoto, H., Vuoristo, P. & Larjo, J., 2014, International Thermal Spray Conference, ITSC2014, 21-23 May, 2014, Barcelona, Spain. p. 130-135 6 p. (DVS-Berichte; vol. 302).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  280. Published

    Abrasion, Erosion and Cavitation Erosion Wear Properties of Thermally Sprayed Alumina Based Coatings

    Matikainen, V., Niemi, K., Koivuluoto, H. & Vuoristo, P., 2014, In : Coatings. 4, 1, p. 18-36 19 p.

    Research output: Contribution to journalArticleScientificpeer-review

  281. Published

    Implementation of a Low Cost Monitoring and Control System to a Radial Injection Plasma Spray Process Towards Manufacturing of High-Quality, Consistent Coatings at Improved Efficiency and Lower Cost

    Matikainen, V., Niemi, K., Kylmälahti, M., Vuoristo, P., Larjo, J., Kriikka, N. & Linden, I., 2012, Thermal Spray 2012: Proceedings from the International Thermal Spray Conference and Exposition, May 21-24, 2012, Houston, Texas, USA. Lima, R. S., Agarwal, A., Hyland, M. M., Lau, Y-C., Li, C-J., McDonald, A. & Toma, F-L. (eds.). ASM International, p. 712-717 (International Thermal Spray Conference and Exposition).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  282. Published

    Advanced coatings by novel high-kinetic thermal spray processes

    Matikainen, V., Koivuluoto, H., Milanti, A. & Vuoristo, P., 9 Feb 2015, In : Materia. 73, 1, p. 46-50 5 p.

    Research output: Contribution to journalArticleProfessional

  283. Published

    Microstructural Characteristics Of Different Cr3C2 Coating Compositions Sprayed with HVAF Process

    Matikainen, V., Koivuluoto, H. & Vuoristo, P., Jan 2015, Surface Modification Technologies XXVIII : Proceedings of the Twenty Eighth International Conference on Surface Modification Technologies. Sudarshan, T. S., Vuoristo, P. & Koivuluoto, H. (eds.). Valardocs, Vol. 28. p. 77-87

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  284. Published

    Spray parameter effect on HVAF sprayed (Fe,Cr)C-30FeNiCrSi hardmetal coatings

    Matikainen, V., Khanlari, K., Milanti, A., Koivuluoto, H. & Vuoristo, P., 2016, International Thermal Spray Conference & Exposition, ITSC 2016. DVS Media GmbH, p. 184-189 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  285. Published

    High-temperature sliding wear behaviour of thermally sprayed Cr3C2-based coatings

    Matikainen, V., Bolelli, G., Koivuluoto, H., Sassatelli, P., Lusvarghi, L. & Vuoristo, P., 2016, Proceedings of The 17th Nordic Symposium on Tribology - NORDTRIB 2016. 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  286. Published

    Sliding wear behaviour of HVOF and HVAF sprayed Cr3C2-based coatings

    Matikainen, V., Bolelli, G., Koivuluoto, H., Sassatelli, P., Lusvarghi, L. & Vuoristo, P., 2017, In : Wear. 388-389, p. 57-71

    Research output: Contribution to journalArticleScientificpeer-review

  287. Published

    A Study of Cr3C2-Based HVOF- and HVAF-Sprayed Coatings: Microstructure and Carbide Retention

    Matikainen, V., Bolelli, G., Koivuluoto, H., Honkanen, M., Vippola, M., Lusvarghi, L. & Vuoristo, P., Aug 2017, In : Journal of Thermal Spray Technology. 26, 6, p. 1-18 18 p.

    Research output: Contribution to journalArticleScientificpeer-review

  288. Published

    Effect of Nozzle Geometry on the Microstructure and Properties of HVAF Sprayed Hard Metal Coatings

    Matikainen, V., Koivuluoto, H., Schubert, J., Houdkova, S. & Vuoristo, P., 2017, Thermal Spray 2017: Proceedings from the International Thermal Spray Conference (June 7-9). DVS Media GmbH, 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  289. Published

    Effect of nozzle geometry on the microstructure and properties of hvaf-sprayed wc-10co4cr and cr3c2-25nicr coatings

    Matikainen, V., Koivuluoto, H., Vuoristo, P., Schubert, J. & Houdková, 1 Apr 2018, In : Journal of Thermal Spray Technology. 27, 4, p. 680-694 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  290. Published

    High Speed Slurry-Pot Erosion Wear Testing of HVOF and HVAF Sprayed Hardmetal Coatings

    Matikainen, V., Rubio Peregrina, S., Ojala, N., Koivuluoto, H., Schubert, J., Houdková, S. & Vuoristo, P., 2018.

    Research output: Other conference contributionPaper, poster or abstractScientific

  291. Published

    Cavitation erosion, slurry erosion and solid particle erosion performance of metal matrix composite (MMC) coatings sprayed with modern high velocity thermal spray processes

    Matikainen, V., Rubio, S., Ojala, N., Koivuluoto, H., Schubert, J., Houdková, S. & Vuoristo, P., 1 Jan 2017, Materials Science and Technology Conference and Exhibition 2017, MS and T 2017: October 8-12, 2017, Pittsburgh, Pennsylvania USA. Association for Iron and Steel Technology, AISTECH, Vol. 2. p. 1161-1163 3 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  292. Published

    Slurry and dry particle erosion wear properties of WC-10Co4Cr and Cr3C2-25NiCr hardmetal coatings deposited by HVOF and HVAF spray processes

    Matikainen, V., Rubio Peregrina, S., Ojala, N., Koivuluoto, H., Schubert, J., Houdkova, S. & Vuoristo, P., 2018, Proceedings of the 18th Nordic Symposium on Tribology, NORDTRIB 2018: 18-21 June 2018, Uppsala, Sweden. 2 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  293. Published

    Erosion wear performance of WC-10Co4Cr and Cr3C2-25NiCr coatings sprayed with high-velocity thermal spray processes

    Matikainen, V., Rubio Peregrina, S., Ojala, N., Koivuluoto, H., Schubert, J., Houdková & Vuoristo, P., 25 Jul 2019, In : Surface and Coatings Technology. 370, p. 196-212 17 p.

    Research output: Contribution to journalArticleScientificpeer-review

  294. Published

    A study of Cr3C2-based HVOF- and HVAF-sprayed coatings: Abrasion, dry particle erosion and cavitation erosion resistance

    Matikainen, V., Koivuluoto, H. & Vuoristo, P., 15 Apr 2020, In : Wear. 446-447, 203188.

    Research output: Contribution to journalArticleScientificpeer-review

  295. Published

    Thermal spraying in Europe's Nordic region

    Marcocsan, N., Nylen, P., Turunen, E., Vuoristo, P. & Wigren, J., 2007, In : Journal of Thermal Spray Technology. 16, 4, p. 463-464

    Research output: Contribution to journalArticleScientificpeer-review

  296. Published

    Pinnoitteet kunnossapidossa

    Mäntylä, T. & Vuoristo, P., 1997, In : Hitsaustekniikka. 47, 2, p. 9-10

    Research output: Contribution to journalArticleProfessional

  297. Published

    PVD- and CVD-coatings: Preparation and applications

    Mäntylä, T. A. & Vuoristo, P., 1989, Materiaalitekniikan elektronisuihku- ja pinnoitusmenetelmät, Tampere, 27.-28.9.1989, TTKK, Materiaaliopin laitos ja E.O. Paton Electric Welding Institute, Kiova.

    Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

  298. Published

    Development of Thin Alumina Coatings for Improvement of the Inter-Electrode Insulation of Metallic MHD Electrodes

    Mäntylä, T., Vuoristo, P. & Kettunen, P., 1984, Tampere: Tampere University of Technology. 28 p. (Tampere University of Technology, Institute of Materials Science, Report; no. 23/1984)

    Research output: Book/ReportCommissioned reportProfessional

  299. Published

    Abrasive and erosive wear of thermally sprayed ceramic and cermet coatings

    Mäntylä, T., Niemi, K. & Vuoristo, P., 1995, Proceedings of the International Symposium on Advanced Ceramics for Structural and Tribological Applications August 20-24, 1995, Vancouver, Canada. Hawthorne, H. M. & Trosczyski, T. (eds.). Montreal: The Canadian Institute of Mining, Metallurgy and Petrolium, p. 483-94

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  300. Published

    Wear Behaviour of Thermally Sprayed Oxide Coatings

    Mäntylä, T., Ahmaniemi, S., Knuutila, J. & Vuoristo, P., 2000, 9th Nordic Symposium on Tribology NORDTRIB 2000, Volume 3, Hotel Haikko Manor, Porvoo, Finland 11-14 June 2000, VTT Symposium 202. Andersson, P., Ronkainen, H. & Holmberg, K. (eds.). Espoo: VTT, p. 779-786

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  301. Published

    9. Kansainvälinen MHD-konferenssi. Japani

    Mäntylä, T. & Vuoristo, P., 1986, Tampere: Tampereen teknillinen korkeakoulu. (Tampereen teknillinen korkeakoulu, Materiaaliopin laitos, Raportti; no. 67/1986)

    Research output: Book/ReportCommissioned reportProfessional

  302. Published

    CVD-Densification of Plasma Sprayed Oxide Coatings

    Mäntylä, T., Vuoristo, P. & Kettunen, P., 1984, Tampere: Tampere University of Technology. 16 p. (Tampere University of Technology, Institute of Materials Science, Report; no. 16/1984)

    Research output: Book/ReportCommissioned reportProfessional

  303. Published

    Improved TBSCs by Inorganic Sealing

    Mäntylä, T., Ahmaniemi, A. & Vuoristo, P., 2000, Proceedings of the 10th Iketani Conference on Materials Research Towards the 21st Century , Symposia on Iron and Steel, Advanced Ceramics and Coatings, Ceramic and Metal Matrix Composites, The 10th International Symposium on Nondestructive Characterization of Materials, June 26-30, 2000, Karuizawa, Japan. Okubo, T., Kishi, T. & Saito, T. (eds.). p. 209-210

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  304. Published

    Development of Thin Alumina Coatings for Improvement of the Inter-Electrode Insulation of Metallic MHD Electrodes

    Mäntylä, T., Vuoristo, P. & Kettunen, P., 1985, In : Itogi Naucho-Issledovatel'skih i Opytno-Konstruktorskih Rabot za 1984 god. god Nauchnotechnicheskij otchet No 8, Moscow, USSR. 8, p. 109-131 23 p.

    Research output: Contribution to journalArticleScientific

  305. Published

    Electrical Insulating Properties and Thermal Stability of R.F. Sputtered Alumina Coatings

    Mäntylä, T., Vuoristo, P., Telama, A. & Kettunen, P., 1985, In : Thin Solid Films. 126, p. 43-49

    Research output: Contribution to journalArticleScientificpeer-review

  306. Published

    Corrosion Resistance of Thermal Sprayed Ceramic and Cermet Coatings in Aqueous Conditions

    Mäntylä, T. & Vuoristo, P., 2003, Les Premieres Rencontres Internationales sur la Projection Thermique, Lille, France, 4-5 December, 2003. p. 176-181

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  307. Published

    Wear and Corrosion Resistance of Thermally Srayed Ceramic Oxide Coatings Oxide

    Mäntylä, T., Niemi, K., Kumpulainen, E., Knuuttila, J. & Vuoristo, P., 1997, Protective Coatings and Thin Films : Synthesis, Characterization and Applications, Proceedings of the NATO Advanced Research Workshop on Protective Coatings and Thin Films: Synthesis, Characterization and Applications, Hotel Dom Joao II, Portimao, Algarve, Portugal, May 30-June 5, 1996. Pauleau, Y. & Barna, P. B. (eds.). Algarve Portugal: Kluwer Academic Publ, 1997., p. 421-30

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  308. Published

    Densification of plasma sprayed coatings

    Mäntylä, T. A. & Vuoristo, P., 1989, Materiaalitekniikan elektronisuihku- ja pinnoitusmenetelmät, Tampere, 27.-28.9.1989, TTKK, Materiaaliopin laitos ja E.O. Paton Electric Welding Institute, Kiova.

    Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

  309. Published

    Development of Thin Alumina Coatings for Improvement of the Interelectrode Insulation of Metallic MHD Electrodes

    Mäntylä, T., Vuoristo, P. & Kettunen, P., 1986, Abstract in the Proc. of Ninth International Conference on MHD Electrical Pow er Generation, 17.-21.11.1986. Tsukuba, Ibaraki, p. 1683-84

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  310. Published

    Hot corrosion and hot erosion resistant thermal spray coatings

    Mäntylä, T., Uusitalo, M. & Vuoristo, P., 2005, The 2nd International Meeting on Thermal Spraying, Lille, France, 1-2 December. p. 244-247

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  311. Published

    Pinnoitteella eristetty MHD-generaattorin metallinen elektrodi- ja eristemoduli

    Mäntylä, T., Vuoristo, P. & Kettunen, P., 1986, Unknown Publisher.

    Research output: Book/ReportBookScientificpeer-review

  312. Published

    CVD-Densification of Plasma Sprayed Oxide Coatings

    Mäntylä, T., Vuoristo, P. & Kettunen, P., 1984, Proc. of the International Conf. on Metallurgical Coatings, San Diego, CA, April 9-13, and Thin solid Films. p. s. 437-

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  313. Published

    Preparation and Characterization of Powders and Coatings Containing Solid Lubricants

    Männikkö, U., Määttä, A., Vuoristo, P. & Mäntylä, T., 2003, Thermal Spray 2003, Advancing the Science and Applying the Technology, Vol. 1, Proceedings of the 2003 International Spray Conference, 5-8 May, Orlando, Florida, USA. Marple, B. R. & Moreau, C. (eds.). ASM International, p. 243-248

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  314. Published

    Preparation of powders and HVOF sparyed coatings for improved sliding properties by addition solid lubricants

    Männikkö, U., Määttä, A., Vuoristo, P. & Mäntylä, T., 2002, International Thermal Spray Conference, Essen 4.-6.3.2002. Lugscheider, E. (ed.). p. 676-680

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  315. Published

    Mechanical properties and corrosion resistance of cold sprayed coatings

    Mäkinen, H., Lagerbom, J. & Vuoristo, P., 2006, Proceedings of the 2006 International Thermal Spray Conference, ITSC2006, 15-18 May Seattle, Washington, USA. Marple, B. R. (ed.). p. 6 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  316. Published

    Adhesion of cold sprayed coatings: effect of powder, substrate, and heat treatment

    Mäkinen, H., Lagerbom, J. & Vuoristo, P., 2007, Proceedings of the 2007 International Thermal Spray Conference Global Coating Solutions, May 14-16, 2007, Beijing, China. Marple, B. (ed.). p. 31-36

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  317. Published

    Surface rolling fatigue testing of thermally sprayed coatings

    Mäkelä, A., Vuoristo, P., Lahdensuo, M., Niemi, K. & Mäntylä, T., 1994, Proc. of the 7th National Thermal Spray Conference NTSC 94, ASM International Materials Park, OH, USA. Berndt, C. C. & Sampath, S. (eds.). p. 759-763

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  318. Published

    HVOF-ruiskutettujen sulautuspinnoitteiden vertailu

    Mäkelä, A., Kumpulainen, E., Niemi, K. ., Vuoristo, P. & Mäntylä, T., 1993, Tampere: Tampereen teknillinen korkeakoulu. 19 p. (Tampereen teknillinen korkeakoulu, Materiaaliopin laitos, Raportti; no. 25/1993)

    Research output: Book/ReportCommissioned reportProfessional

  319. Published

    Taustaselvitys suurnopeustekniikoilla ruiskutettujen pinnoitteiden vierintäväsymistutkimukselle

    Mäkelä, A., Vuoristo, P., Niemi, K. & Mäntylä, T., 1993, Tampere: Tampereen teknillinen korkeakoulu. 54 p. (Tampereen teknillinen korkeakoulu, Materiaaliopin laitos, Raportti; no. 28/1993)

    Research output: Book/ReportCommissioned reportProfessional

  320. Published

    Erilaisten pinnoitteiden vertaileva adhesiivinen kulutustutkimus

    Mäkelä, A., Niemi, K., Vuoristo, P. & Mäntylä, T., 1992, Tampereen teknillinen korkeakoulu. 33 p. (Tampereen teknillinen korkeakoulu, Materiaalioppi, Raportti; no. 56/1992)

    Research output: Book/ReportCommissioned reportProfessional

  321. Published

    Termisten NiCrBSi-sulautuspinnoitteiden vertailu

    Mäkelä, A., Kumpulainen, E., Niemi, K. ., Vuoristo, P. & Mäntylä, T., 1993, Tampere: Tampereen teknillinen korkeakoulu. 18 p. (Tampereen teknillinen korkeakoulu, Materiaaliopin laitos, Raportti; no. 4/1993)

    Research output: Book/ReportCommissioned reportProfessional

  322. Published

    Liekkiruiskutettujen sulautuspinnoitteiden vertailu

    Mäkelä, A., Kumpulainen, E., Niemi, K. ., Vuoristo, P. & Mäntylä, T., 1993, Tampere: Tampereen teknillinen korkeakoulu. 23 p. (Tampereen teknillinen korkeakoulu, Materiaaliopin laitos, Raportti; no. 26/1993)

    Research output: Book/ReportCommissioned reportProfessional

  323. Published

    Structure and tribological characteristics of HVOF coatings sprayed from powder blends of Cr3C2-25NiCr and NiCrBSi alloy

    Määttä, A., Kanerva, U. & Vuoristo, P., 2011, In : Journal of Thermal Spray Technology. 20, 1-2, p. 366-371

    Research output: Contribution to journalArticleScientificpeer-review

  324. Published

    Fetting-kulumista ja -väsymistä kestäviä pinnoitteita

    Määttä, A., Ahmaniemi, S. & Vuoristo, P., 2001, Tampere: Tampereen teknillinen korkeakoulu. 22 p. (Tampereen Teknillinen Korkeakoulu, Materiaaliopin laitos, raportti; no. 27)

    Research output: Book/ReportCommissioned reportProfessional

  325. Published

    Structure and tribological characteristics of HVOF coatings sprayed from powder blends of Cr3C2-25NiCr and NiCrBSi alloy

    Määttä, A., Kanerva, U. & Vuoristo, P., 2010, Proceedings of ITSC2010 International Thermal SPray Conference & Exposition, Singapore, May 3-5. 2010. p. 5 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  326. Published

    Tribological properties of coatings and materials in sliding contact with stainless steel strip

    Määttä, A., Vuoristo, P. & Mäntylä, T., 1998, In: Ronkainen, H. & Holmberg, K., COST 516 Tripology Symposium, Espoo, Finland, 14-15 May 1998, VTT Symposium 180. Espoo: VTT, p. 358-365

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  327. Published

    Friction and adhesion of stainless steel strip against tool steels in unlubricated sliding with high contact load

    Määttä, A., Vuoristo, P. & Mäntylä, T., 2001, In : Tribology International. 34, p. 779-786

    Research output: Contribution to journalArticleScientificpeer-review

  328. Published

    Lubrication in sliding of tool steel against stainless steel

    Määttä, A., Vuoristo, P. & Mäntylä, T., 2001, In : Tribologia - Finnish Journal of Tribology. 20, p. 11-18

    Research output: Contribution to journalArticleScientificpeer-review

  329. Published

    Lubrication in Cold Formating of Stainless Steel

    Määttä, A., Vuoristo, P. & Mäntylä, T., 2000, 9th Nordic Symposium on Tribology NORDTRIB 2000, Hotel Haikko Manor, Porvoo, Finland, 11-14 June 2000, Volume 3, VTT Symposium 202. Andersson, P., Ronkainen, H. & Holmberg, K. (eds.). Espoo: VTT, p. 687-696

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  330. Published

    Structure and tribological characteristics of HVOF coatings sprayed from powder blends of Cr3C2-25NiCr and metallic alloys

    Määttä, A., Männikkö, U., Vuoristo, P., Mäntylä, T. & Laitinen, K., 2002, International Thermal Spray Conference, Essen 4.-6.3.2002. Lugscheider, E. (ed.). p. 905-907

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  331. Published

    Tribology of thin coatings sliding against hot rolled stainless steel

    Määttä, A., Vuoristo, P. & Mäntylä, T., 2000, Proceedings of the 3rd COST516 Tribology Symposium, Eibar, Spain, 18 and 19 May 2000. Igartua, A. & Alberdi, A. (eds.). p. 243-249

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  332. Published

    Development of coatings and materials for forming tools of stainless steel (F19)

    Määttä, A., Vuoristo, P. & Mäntylä, T., 2001, Belgium: European Communities.

    Research output: Book/ReportCommissioned reportProfessional

  333. Published

    Tribological properties of thin hard coatings in sliding contact with stainless and mild steel strip

    Määttä, A., Vuoristo, P. & Mäntylä, T., 1999, Proceedings of the 2nd Cost 516 Tribology Symposium, Antwerpen, Belgium, 20-21 May 1999. Meneve, J. & Vercammen, K. (eds.). Flemish Institute for Technological research (Vito), p. 199-206

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  334. Published

    Wear and corrosion properties of plasma sprayed Al2O3 and Cr2O3 coatings sealed by aluminum phosphates

    Leivo, E., Vippola, M., Sorsa, P., Vuoristo, P. & Mäntylä, T., 1997, In : Journal of Thermal Spray Technology. 6, 2, p. 205-210

    Research output: Contribution to journalArticleScientificpeer-review

  335. Published

    Properties of thermally sprayed fluoropolymer PVDF, ECTFE, PFA and FEP coatings

    Leivo, E., Wilenius, T., Kinos, T., Vuoristo, P. & Mäntylä, T., 2004, In : Progress in Organic Coatings. 49, p. 69-73

    Research output: Contribution to journalArticleScientificpeer-review

  336. Published

    Maakaasuputkisto - osien pinnoitteet

    Leivo, E., Vuoristo, P. & Mäntylä, T., 2000, In : Kunnnossapito. 14, 9, p. 32-35

    Research output: Contribution to journalArticleProfessional

  337. Published

    Structure and Thermal Conductivity of Flame Sprayed Polyamide 11 Coatings Filled with Al2O3 AIN and BN Ceramics

    Leivo, E. M., Kellberg, T. H., Kolari, M. J., Vuoristo, P. M. J. & Mäntylä, T. A., 2001, Thermal Spray 2001, New Surfaces for a New Millennium, Proceedings of the International Thermal Spray Conference, 28-30 May 2001, Singapore. Berndt, C. C., Khor, K. A. & Lugschneider, E. F. (eds.). usa: ASM International, p. 327-330

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  338. Published

    Abrasion Wear and Corrosion Resistance in Chlorine Containing Conditions of Iron Based Thermal Spray Coatings

    Laurila, J., Milanti, A., Niemi, K. & Vuoristo, P., 2013, Proceedings of the International Thermal Spray Conference: Thermal Spray 2013 - ITSC 2013: Innovative Coatings Solutions for the Global Economy, May 13-15, 2013, Busan, Republic of Korea. Lima, R. S., Agarwal, A., Hyland, M. M., Lau, Y-C., Mauer, G., McDonald, A. & Toma, F-L. (eds.). ASM International, p. 550-556 7 p. (International Thermal Spray Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  339. Published

    Corrosion and wear resistance of molybdenum containing arc spray composite coatings

    Laurila, J., Niemi, K., Vuoristo, P. & Vajala, J., 2011, ITSC 2011, International Thermal Spray Conference & Exposition, September 27 - 29, 2011, Hamburg. DVS-Berichte. Dusseldorf: DVS Media GmbH, p. 1-6 6 p. (International Thermal Spray Conference & Exposition ITSC; vol. 276).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  340. Published

    Microstructure and wear behaviour of a vanadium carbide reinforced weld coating

    Laurila, J., Milanti, A., Nurminen, J., Kallio, M. & Vuoristo, P., 2013, In : Wear. 307, 1-2, p. 142-149 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  341. Published

    Degradation mechanism of thermally sprayed coatings in chloride containing electrolytes

    Laurila, J., Niemi, K. & Vuoristo, P., 2010, ITSC2010 International Thermal Spray Conference & Exposition, 3.-5.5.2010, Singapore. p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  342. Published

    Dynamic Corrosion and Wear Testing of Corrosion Resistant Thermal Spray Coatings and Wrought Reference Material in Chlorine Containing Conditions with Low pH Values

    Laurila, J., Niemi, K., Vuoristo, P. & Vajala, J., 2012, Thermal Spray 2012, Proceedings of the International Thermal Spray Conference and Exposition,TSC 2012, May 21-24, 2012, Houston, Texas USA. Lima, R. S., Agarwal, A., Hyland, M. M., Lau, Y-C., Li, C-J., McDonald, A. & Toma, F-L. (eds.). ASM International, p. 76-80 (International Thermal Spray Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  343. Published

    Axially symmetric laser in surface treatment applications

    Latokartano, J., Pajukoski, H. & Vuoristo, P., 2009, 12th Nordic Conference on Laser Materials Processing, NOLAMP Conference 2009, 24-26 August, 2009, Copenhagen, Denmark. p. 10 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  344. Published

    Large area surface treatments with 6 kW HPDL

    Latokartano, J., Hayhurst, P., Tuominen, J. & Vuoristo, P., 24 Jun 2003, Lasers in Manufacturing 2003 (LIM 2003): Proceedings of the Second International WLT-Conference, Munich, Germany, June 24.-26, 2003. Poprawe, R. & Otto, A. (eds.). AT-Fachverlag GmbH, Stuttgart, p. 17-22

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  345. Published

    Cold Spray -tekniikka - termisen ruiskutuksen uusin mahdollisuus

    Lagerbom, J. & Vuoristo, P., 2004, In : Hitsaustekniikka. 5, p. 37-40

    Research output: Contribution to journalArticleProfessional

  346. Published

    Effect of heat treatment on properties of cold sprayed coatings

    Lagerbom, J., Mäkinen, H. & Vuoristo, P., 2005, International Thermal Spray Conference & Exposition ITSC 2005, Basel, Swizerland, May 2 - 4, 2005. p. 5 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  347. Published

    Termisesti ruiskutettujen pinnoitteiden eroosionkestävyys leijukerroskattiloissa

    Kumpulainen, E., Niemi, K., Vuoristo, P. & Mäntylä, T., 1994, Tampere: Tampereen teknillinen korkeakoulu. 15 p. (Tampereen teknillinen korkeakoulu, Materiaaliopin laitos, Raportti; no. 11/1994)

    Research output: Book/ReportCommissioned reportProfessional

  348. Published

    NiCrBSi-, CoNiCrBSi- ja WC+NiCrBSi-sulautuspinnoitteiden vertailu

    Kumpulainen, E., Mäkelä, A., Niemi, K. ., Vuoristo, P. & Mäntylä, T., 1993, Tampere: Tampereen teknillinen korkeakoulu. 18 p. (Tampereen teknillinen korkeakoulu, Materiaaliopin laitos, Raportti; no. 19/1993)

    Research output: Book/ReportCommissioned reportProfessional

  349. Published

    Vakuumisulautettujen NiCrBSi- ja CoNiCrBSi-pinnoitteiden vertailu

    Kumpulainen, E., Mäkelä, A., Niemi, K. ., Vuoristo, P. & Mäntylä, T., 1993, Tampere: Tampereen teknillinen korkeakoulu. 17 p. (Tampereen teknillinen korkeakoulu, Materiaaliopin laitos, Raportti; no. 11/1993)

    Research output: Book/ReportCommissioned reportProfessional

  350. Published

    Termiset sulautuspinnoitteet

    Kumpulainen, E., Mäkelä, A., Niemi, K., Vuoristo, P. & Mäntylä, T., 1992, Tampereen teknillinen korkeakoulu. 57 p. (Tampereen teknillinen korkeakoulu, Materiaalioppi, Raportti; no. 7/1992)

    Research output: Book/ReportCommissioned reportProfessional

  351. Published

    Characteristics of Aluminium Phospate Sealed Chromium Oxide Coatings

    Kumpulainen, E., Vippola, M., Niemi, K., Sorsa, P., Vuoristo, P. & Mäntylä, T., 1995, Advances in Thermal Spray Science and Technology, Proc. of the Eight National Thermal Spray Conference, 11-15. September 1995. Berndt, C. C. & Sampath, S. (eds.). Materials Park, OH: ASM International, p. 579-582

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  352. Published

    Characteristics of phosphoric acid sealed ceramic oxide coatings

    Kumpulainen, E., Vippola, M., Vuoristo, P., Sorsa, P. & Mäntylä, T., 1996, Thermal Spray: Practical Solutions for Engineering Problems, Proc. of the 9th National Thermal Spray Conference, 7-11.10.1996. Berndt, C. C. (ed.). Metals Park, OH: ASM International, p. 489-491

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  353. Published

    Termisten NiCrBSi-, ja NiCrBSi+WC ja CoNiCrBSi-sulautuspinnoiteiden vertailu

    Kumpulainen, E., Mäkelä, A., Niemi, K. ., Vuoristo, P. & Mäntylä, T., 1993, Tampere: Tampereen teknillinen korkeakoulu. 20 p. (Tampereen teknillinen korkeakoulu, Materiaaliopin laitos, Raportti; no. 6/1993)

    Research output: Book/ReportCommissioned reportProfessional

  354. Published

    Sulautuspinnoitteet

    Kumpulainen, E., Mäkelä, A., Niemi, K. ., Vuoristo, P. & Mäntylä, T., 1993, Helsinki: Unknown Publisher. 18 p. (Suomen metalliteollisuuden keskusliitto, Tekninen tiedotus)

    Research output: Book/ReportCommissioned reportProfessional

  355. Published

    NiCrBSi- ja CoNiCrBSi-sulautuspinnoitteiden korroosionkestävyys

    Kumpulainen, E., Mäkelä, A., Niemi, K. ., Vuoristo, P. & Mäntylä, T., 1993, Tampere: Tampereen teknillinen korkeakoulu. 9 p. (Tampereen teknillinen korkeakoulu, Materiaaliopin laitos, Raportti; no. 20/1993)

    Research output: Book/ReportCommissioned reportProfessional

  356. Published

    Formation of microstructure of spray-fused power coatings

    Kulu, P., Pihl, T., Tammjärv, K. & Vuoristo, P., 2002, In : Proceedings of the Estonian Academy of Sciences, Engineering. 8/1, p. 38-51

    Research output: Contribution to journalArticleScientificpeer-review

  357. Published

    Influence of laser irradiation on formation of low-pressure cold sprayed coatings

    Kulmala, M., Koivuluoto, H. & Vuoristo, P., 2008, Conference Proceedings of International Thermal Spray Conference & Exposition, June 2-4, 2008, Maastricht, the Netherlands. Lugscheider, E. (ed.). p. 6 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  358. Published

    Influence of process conditions in laser-assisted low-pressure cold spraying

    Kulmala, M. & Vuoristo, P., 2008, In : Surface and Coatings Technology. 202, 18, p. 4503-4508

    Research output: Contribution to journalArticleScientificpeer-review

  359. Published

    Influence of process conditions in laser-assisted low-pressure cold spraying

    Kulmala, M. & Vuoristo, P., 2007, 3rd RIPT, Third International Meeting on Thermal Spraying, 6.-7.12.2007, Lille, France. p. 19 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  360. Published

    Influence of microstructure on temperature-induced ageing mechanisms of different solar absorber coatings

    Kotilainen, M., Mizohata, K., Honkanen, M. & Vuoristo, P., 2014, In : Solar Energy Materials and Solar Cells. 120, 120, p. 462-472 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  361. Published

    Temperature-induced ageing of solar absorbers on plain and anodized aluminium substrates

    Kotilainen, M., Mizohata, K., Honkanen, M., Hyvärinen, L. & Vuoristo, P., Mar 2015, In : Solar Energy Materials and Solar Cells. 134, p. 244-251 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  362. Published

    Influence of Diffusion Barriers on Thermal Ageing Behaviour of Solar Absorber Coatings on Copper

    Kotilainen, M. & Vuoristo, P., 2015, Surface Modification Technologies XXVIII: Tampere University of Technology Tampere, Finland June 16-18, 2014 . p. 481-491 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  363. Published

    Influence of temperature-induced copper diffusion on degradation of selective chromium oxy-nitride solar absorber coatings

    Kotilainen, M., Honkanen, M., Mizohata, K. & Vuoristo, P., 2016, In : Solar Energy Materials and Solar Cells. 145, p. 323-332 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  364. Published

    Aluminium and tantalum nitride barriers against copper diffusion in solar absorbers

    Kotilainen, M. & Vuoristo, P., 2016, In : Surface Engineering. 32, 8, p. 615-623 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  365. Published

    Hafnium oxide thin films as a barrier against copper diffusion in solar absorbers

    Kotilainen, M., Krumpolec, R., Franta, D., Souček, P., Homola, T., Cameron, D. C. & Vuoristo, P., 1 Jul 2017, In : Solar Energy Materials and Solar Cells. 166, p. 140-146 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  366. Published

    Effect of HVOF Gas Velocity and Fuel to Oxygen Ratio on the Wear Properties of Tungsten Carbide Coating

    Korpiola, K. & Vuoristo, P., 1996, Thermal Spray : Practical Solutions for Engineering Problems, Proceedings of the 9th National Thermal Spray Conference, 7 - 11 October 1996. Berndt, C. C. (ed.). USA: ASM International, p. 177-184

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  367. Published

    Properties of arc-sprayed coatings from Fe-based cored wires for high-temperature applications

    Korobov, Y. S., Nevezhin, S. V., Filippov, M. A., Makarov, A. V., Malygina, I. Y., Fantozzi, D., Milanti, A., Koivuluoto, H. & Vuoristo, P., 12 Dec 2017, Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2017: Proceedings of the 11th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures. American Institute of Physics AIP, 020004. (AIP conference proceedings; vol. 1915).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  368. Published

    Microstructural studies of cold sprayed copper, nickel, and nickel-30% copper coatings

    Koivuluoto, H., Lagerbom, J. & Vuoristo, P., 2007, In : Journal of Thermal Spray Technology. 16, 4, p. 488-497

    Research output: Contribution to journalArticleScientificpeer-review

  369. Published

    Structural analysis of cold-sprayed nickel-based metallic and metallic-ceramic coatings

    Koivuluoto, H. & Vuoristo, P., 2010, In : Journal of Thermal Spray Technology. 19, 5, p. 975-989

    Research output: Contribution to journalArticleScientificpeer-review

  370. Published

    Microstructure and mechanical properties of low-pressure cold-sprayed (LPCS) coatings

    Koivuluoto, H., Lagerbom, J., Kylmälahti, M. & Vuoristo, P., 2008, In : Journal of Thermal Spray Technology. 17, 5-6, p. 721-727

    Research output: Contribution to journalArticleScientificpeer-review

  371. Published

    Microstructure and mechanical properties of low-pressure cold sprayed (LPCS) coatings

    Koivuluoto, H., Lagerbom, J., Kylmälahti, M. & Vuoristo, P., 2008, Conference Proceedings of International Thermal Spray Conference & Exposition, June 2-4, 2008, Maastricht, the Netherlands. Lugscheider, E. (ed.). p. 6 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  372. Published

    Overview of structure and properties of high-pressure and low-pressure cold-sprayed coatings

    Koivuluoto, H., Kotilainen, M. & Vuoristo, P., 2009, In : Welding and Cutting. 8, 2, p. 98-103 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  373. Published

    Effect of ceramic particles on properties of cold-sprayed Ni-20Cr-Al2O3 coatings

    Koivuluoto, H. & Vuoristo, P., 2009, In : Journal of Thermal Spray Technology. 18, 4, p. 555-562

    Research output: Contribution to journalArticleScientificpeer-review

  374. Published

    Corrosion resistance of cold-sprayed Ta coatings in very aggressive conditions

    Koivuluoto, H., Bolelli, G., Lusvarghi, L., Casadei, F. & Vuoristo, P., 2010, In : Surface and Coatings Technology. 205, 4, p. 1103-1107

    Research output: Contribution to journalArticleScientificpeer-review

  375. Published

    Cold-sprayed copper and tantalum coatings - Detailed FESEM and TEM analysis

    Koivuluoto, H., Honkanen, M. & Vuoristo, P., 2010, In : Surface and Coatings Technology. 204, 15, p. 2353-2361

    Research output: Contribution to journalArticleScientificpeer-review

  376. Published

    Corrosion properties of cold-sprayed tantalum coatings

    Koivuluoto, H., Näkki, J. & Vuoristo, P., 2009, In : Journal of Thermal Spray Technology. 18, 1, p. 75-82

    Research output: Contribution to journalArticleScientificpeer-review

  377. Published