Tampere University of Technology

TUTCRIS Research Portal

Petri Vuoristo

  1. Published

    Evaluating the toughness of APS and HVOF-sprayed Al2O3-ZrO2-coatings by in-situ- and macroscopic bending

    Kiilakoski, J., Musalek, R., Lukac, F., Koivuluoto, H. & Vuoristo, P., 2018, In : Journal of the European Ceramic Society. 38, 4, p. 1908-1918

    Research output: Contribution to journalArticleScientificpeer-review

  2. Published

    Evaluation of abrasion wear resistance of HVOF sprayed carbide coatings

    Niemi, K., Vuoristo, P., Eerola, J. & Mäntylä, T., 1991, Tampere: Tampere University of Technology. 7 p. (Tampere University of Technology, Institute of Materials Science, Report; no. 10/1991)

    Research output: Book/ReportCommissioned reportProfessional

  3. Published

    Evaluation of alumina coatings deposited by TopGun HVOF method

    Niemi, K., Vuoristo, P., Mäkelä, A. & Mäntylä, T., 1993, Tampere: Tampere University of Technology. 8 p. (Tampere University of Technology, Institute of Materials Science, Report; no. 42/1993)

    Research output: Book/ReportCommissioned reportProfessional

  4. Published

    Evaluation of carbide and oxide coatings deposited by Miller HV-2000 HVOF method

    Niemi, K., Vuoristo, P., Mäkelä, A. & Mäntylä, T., 1993, Tampere: Tampere University of Technology. 16 p. (Tampere University of Technology, Institute of Materials Science, Report; no. 35/1993)

    Research output: Book/ReportCommissioned reportProfessional

  5. Published

    Evaluation of HVOF coatings deposited by OSU Super Jet System

    Niemi, K., Vuoristo, P. & Mäntylä, T., 1993, Tampere: Tampere University of Technology. 9 p. (Tampere University of Technology, Institute of Materials Science, Report; no. 17/1993)

    Research output: Book/ReportCommissioned reportProfessional

  6. Published

    Evaluation of laser remelting parameters for laser-assisted thermal spray process

    Suutala, J., Tuominen, J. & Vuoristo, P., 2005, Lasers in Manufacturing 2005, Proceedings of the Third International WLT-Conference, Munich, Germany, June 13th-16th, 2005. Beyer, E. (ed.). p. 379-384

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  7. Published

    Evaluation of Thermally Sprayed and Other Polymeric Coatings for Use in Natural Gas Pipeline Components

    Vuoristo, P., Leivo, E., Turunen, E., Leino, M., Järvelä, P. & Mäntylä, T., 2003, Thermal Spray 2003, Advancing the Science and Applying the Technology, Vol. 2, Proceedings of the 2003 International Thermal Spray Conference, 5-8 May, Orlando, Florida, USA. Marple, B. R. & Moreau, C. (eds.). ASM International, p. 1693-1702

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  8. Published

    Evaluation of WC + 17% Co coatings deposited by HVOF TopGun system

    Niemi, K., Vuoristo, P., Mäkelä, A. & Mäntylä, T., 1991, Tampere: Tampere University of Technology. 9 p. (Tampere University of Technology, Institute of Materials Science, Report; no. 41/1991)

    Research output: Book/ReportCommissioned reportProfessional

  9. Published

    Extreme Values of the Piston Engine (Advanced Thick Thermal Barrier Coatings)

    Ahmaniemi, S., Mäntylä, T. & Vuoristo, P., 2003, Tampere: Tampere Technology Centre Ltd.

    Research output: Book/ReportCommissioned reportProfessional

  10. Published

    Extreme Values of the Piston Engine - Thermal insulation and durability of the components

    Ahmaniemi, S., Vuoristo, P. & Mäntylä, T., 2002, Proceedings "Mechanical Engineering Research New Possibilities by Co-operation", Seminar 3 Jan 2002, Tampere University of Technology. Hakalehto, K. & Mattila, M. (eds.). p. 85-93

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  11. Published

    Fabrication of slippery, liquid-infused porous surfaces by flame based aerosol synthesis

    Juuti, P., Haapanen, J., Stenroos, C., Niemelä-Anttonen, H., Harra, J., Koivuluoto, H., Teisala, H. S., Lahti, J., Tuominen, M. T., Kuusipalo, J., Vuoristo, P. & Mäkelä, J., 2017.

    Research output: Other conference contributionPaper, poster or abstractScientific

  12. Published

    Fatigue behavior of laser clad round steel bars

    Tuominen, J., Näkki, J., Poutala, J., Miettinen, J., Peltola, T., Vuoristo, P., Rasehorn, I., Alam, M. M. & Kaplan, A. F. H., 2014, In : Journal of Laser Applications. p. 1-10 10 p., 012006.

    Research output: Contribution to journalArticleScientificpeer-review

  13. Published

    Fatigue behaviour of nickel- and cobalt-based laser cladded coatings on steel bars

    Fantozzi, D., Tuominen, J., Bolelli, G., Lusvarghi, L. & Vuoristo, P., Jan 2015, Surface Modification Technologies XXVIII: Proceedings of the 28th International Conference on Surface Modification Technologies. Sudarshan, T. S., Vuoristo, P. & Koivuluoto, H. (eds.). Valardocs, p. 129-138 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  14. Published

    Fatigue properties of laser clad round steel bars

    Tuominen, J., Näkki, J., Poutala, J., Miettinen, J., Peltola, T., Vuoristo, P., Rasehorn, I., Alam, M. & Kaplan, A., 2013, Proceedings of 32nd International Congress on Applications of Lasers & Electro-Optics ICALEO, October 6-10, 2013, Miami, FL, USA. Laser Institute of America, p. 998-1007 10 p. P140. (International Congress on Applications of Lasers and Electro-Optics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  15. Published

    Fetting-kulumista ja -väsymistä kestäviä pinnoitteita

    Määttä, A., Ahmaniemi, S. & Vuoristo, P., 2001, Tampere: Tampereen teknillinen korkeakoulu. 22 p. (Tampereen Teknillinen Korkeakoulu, Materiaaliopin laitos, raportti; no. 27)

    Research output: Book/ReportCommissioned reportProfessional

  16. Published

    First International Conference on Plasma Surface Engineering

    Vuoristo, P., 1988, Tampereen teknillinen korkeakoulu. 10 p. (TTKK, Materiaaliopin laitos, Raportti; no. 53/1988)

    Research output: Book/ReportCommissioned reportProfessional

  17. Published

    Formation and structure of plasma sprayed manganese-cobalt spinel coatings on preheated metallic interconnector plates

    Puranen, J., Lagerbom, J., Hyvärinen, L., Mäntylä, T., Levänen, E., Kylmälahti, M. & Vuoristo, P., 2010, In : Surface and Coatings Technology. 205, 4, p. 1029-1033

    Research output: Contribution to journalArticleScientificpeer-review

  18. Published

    Formation of microstructure of spray-fused power coatings

    Kulu, P., Pihl, T., Tammjärv, K. & Vuoristo, P., 2002, In : Proceedings of the Estonian Academy of Sciences, Engineering. 8/1, p. 38-51

    Research output: Contribution to journalArticleScientificpeer-review

  19. Published

    Fracture Characteristics of High-Velocity Suspension Flame-Sprayed Aluminum Oxide Coatings

    Kiilakoski, J., Lutoschkin, A., Plachetta, M., Apostol, M., Koivuluoto, H., Killinger, A. & Vuoristo, P., 2016, International Thermal Spray Conference & Exposition, ITSC 2016. DVS Media GmbH, p. 466-471 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  20. Published

    Friction and adhesion of stainless steel strip against tool steels in unlubricated sliding with high contact load

    Määttä, A., Vuoristo, P. & Mäntylä, T., 2001, In : Tribology International. 34, p. 779-786

    Research output: Contribution to journalArticleScientificpeer-review

Previous 1...4 5 6 7 8 9 10 11 ...26 Next

ID: 65118