Tampere University of Technology

TUTCRIS Research Portal

Sampo Tuukkanen

Profile photo

Sampo Tuukkanen

Member of Research Group, Associate Professor (tenure track), Head of Research Group

  • BioMediTech
  • Research group: Sensor Technology and Biomeasurements (STB)
  • Research group: Nanoscale Phenomena and Measurements (NPM)
Visiting address:
SC204b

Email: sampo.tuukkanen@tuni.fi

Phone: +358405415276

Research output

  1. Evaluation of printed P(VDF-TrFE) pressure sensor signal quality in arterial pulse wave measurement

    Laurila, M-M., Peltokangas, M., Lozano Montero, K., Siponkoski, T., Juuti, J., Tuukkanen, S., Oksala, N., Vehkaoja, A. & Mäntysalo, M., 15 Aug 2019, In : IEEE Sensors Journal.

    Research output: Contribution to journalArticleScientificpeer-review

  2. Disposable Microfluidic Sensor Based on Nanocellulose for Glucose Detection

    Uddin, K. M. A., Jokinen, V., Jahangiri, F., Franssila, S., Rojas, O. J. & Tuukkanen, S., Feb 2019, In : Global Challenges. 3, 2, 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  3. Conductive cellulose based foam formed 3D shapes—from innovation to designed prototype

    Siljander, S., Keinänen, P., Ivanova, A., Lehmonen, J., Tuukkanen, S., Kanerva, M. & Björkqvist, T., 31 Jan 2019, In : Materials. 12, 3, 12 p., 430.

    Research output: Contribution to journalArticleScientificpeer-review

  4. Nanocellulose and chitosan based films as low cost, green piezoelectric materials

    Hänninen, A., Sarlin, E., Lyyra, I., Salpavaara, T., Kellomäki, M. & Tuukkanen, S., 15 Dec 2018, In : Carbohydrate Polymers. p. 418-424 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  5. Piezoelectric cantilever force sensor sensitivity measurements

    Virtanen, J., Sariola, V. & Tuukkanen, S., 3 Sep 2018, XXII World Congress of the International Measurement Confederation (IMEKO 2018): 3–6 September 2018, Belfast, United Kingdom. IOP Press, p. 1-4 4 p. (Journal of Physics: Conference Series; vol. 1065).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  6. Lateral strain force sensitivity measurements for piezoelectric polyvinylidenefluoridene sensor array

    Tuukkanen, S. & Sariola, V., Sep 2018, 2018 7th Electronic System-Integration Technology Conference (ESTC). IEEE, 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  7. High Bending-Mode Sensitivity of Printed Piezoelectric Poly(vinylidenefluoride- co-trifluoroethylene) Sensors

    Rajala, S., Schouten, M., Krijnen, G. & Tuukkanen, S., 23 Jul 2018, In : ACS Omega. 3, 7, p. 8067-8073 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  8. Effect of surfactant type and sonication energy on the electrical conductivity properties of nanocellulose-CNT nanocomposite films

    Siljander, S., Keinänen, P., Räty, A., Ramakrishnan, K. R., Tuukkanen, S., Kunnari, V., Harlin, A., Vuorinen, J. & Kanerva, M., 20 Jun 2018, In : International Journal of Molecular Sciences. 19, 6, 1819.

    Research output: Contribution to journalArticleScientificpeer-review

  9. Evaluation of dry electrodes in canine heart rate monitoring

    Virtanen, J., Somppi, S., Törnqvist, H., Jeyhani, V., Fiedler, P., Gizatdinova, Y., Majaranta, P., Väätäjä, H., Cardó, A. V., Lekkala, J., Tuukkanen, S., Surakka, V., Vainio, O. & Vehkaoja, A., 1 Jun 2018, In : Sensors. 18, 6, 1757.

    Research output: Contribution to journalArticleScientificpeer-review

  10. Electropolymerized polyazulene as active material in flexible supercapacitors

    Suominen, M., Lehtimäki, S., Yewale, R., Damlin, P., Tuukkanen, S. & Kvarnström, C., 15 Jul 2017, In : Journal of Power Sources. 356, p. 181-190 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  11. Fabrication and characterization of nanocellulose aerogel structures

    Virtanen, J., Janka, M. & Tuukkanen, S., 13 Jun 2017, EMBEC & NBC 2017: Joint Conference of the European Medical and Biological Engineering Conference (EMBEC) and the Nordic-Baltic Conference on Biomedical Engineering and Medical Physics (NBC), Tampere, Finland, June 2017. Springer, p. 1029-1032 4 p. (IFBME Proceedings; vol. 65).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  12. Performance, stability and operation voltage optimization of screen-printed aqueous supercapacitors

    Lehtimäki, S., Railanmaa, A., Keskinen, J., Kujala, M., Tuukkanen, S. & Lupo, D., 6 Apr 2017, In : Scientific Reports. 7, 46001.

    Research output: Contribution to journalArticleScientificpeer-review

  13. Engineering and Characterization of Bacterial Nanocellulose Films as Low Cost and Flexible Sensor Material

    Mangayil, R., Rajala, S., Pammo, A., Sarlin, E., Luo, J., Santala, V., Karp, M. & Tuukkanen, S., 2017, In : ACS Applied Materials & Interfaces. 9, 22, p. 19048–19056 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  14. Pyrolysed cellulose nanofibrils and dandelion pappus in supercapacitor application

    Virtanen, J., Pammo, A., Keskinen, J., Sarlin, E. & Tuukkanen, S., 2017, In : Cellulose. 24, 8, p. 3387–3397 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  15. Architectural Modifications for Flexible Supercapacitor Performance Optimization

    Keskinen, J., Lehtimäki, S., Dastpak, A., Tuukkanen, S., Flyktman, T., Kraft, T., Railanmaa, A. & Lupo, D., Nov 2016, In : Electronic Materials Letters. 12, 6, p. 795–803 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  16. Testing and comparing of film-type sensor materials in measurement of plantar pressure distribution

    Rajala, S., Salpavaara, T. & Tuukkanen, S., 18 Oct 2016, 2016 38th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) . p. 1-4 4 p. (2016 38th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) ).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  17. Challenges and capabilities of conductive polymeric materials for electromechanical stimulation of stem cells: A case study

    Viehrig, M., Tuukkanen, S. & Kallio, P., 6 Sep 2016, 2016 International Conference on Manipulation, Automation and Robotics at Small Scales, MARSS 2016. Institute of Electrical and Electronics Engineers Inc., 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  18. Piezoelectric sensitivity of a layered film of chitosan and cellulose nanocrystals

    Hänninen, A., Rajala, S., Salpavaara, T., Kellomäki, M. & Tuukkanen, S., 4 Sep 2016, 30th Eurosensors Conference, EUROSENSORS 2016. Elsevier, p. 1176-1179 4 p. (Procedia Engineering; vol. 168).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  19. Cellulose nanofibril film as a piezoelectric sensor material

    Rajala, S., Siponkoski, T., Sarlin, E., Mettänen, M., Vuoriluoto, M., Pammo, A., Juuti, J., Rojas, O. J., Franssila, S. & Tuukkanen, S., 22 Jun 2016, In : ACS Applied Materials & Interfaces. 8, 24, p. 15607–15614 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  20. Fully printed memristors for a self-sustainable recorder of mechanical energy

    Vilmi, P., Nelo, M., Voutilainen, J-V., Palosaari, J., Pörhönen, J., Tuukkanen, S., Jantunen, H., Juuti, J. & Fabritius, T., 19 Apr 2016, In : Flexible and Printed Electronics. 1, 2, 8 p., 025002.

    Research output: Contribution to journalArticleScientificpeer-review

  21. Structural and Electrical Characterization of Solution-Processed Electrodes for Piezoelectric Polymer Film Sensors

    Rajala, S., Mettänen, M. & Tuukkanen, S., 15 Mar 2016, In : IEEE Sensors Journal. 16, 6, p. 1692-1699 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  22. Behaviour of one-step spray-coated carbon nanotube supercapacitor in ambient light harvester circuit with printed organic solar cell and electrochromic display

    Tuukkanen, S., Välimäki, M., Lehtimäki, S., Vuorinen, T. & Lupo, D., 9 Mar 2016, In : Scientific Reports. 6, 22967.

    Research output: Contribution to journalArticleScientificpeer-review

  23. A survey of printable piezoelectric sensors

    Tuukkanen, S. & Rajala, S., 27 Oct 2015, IEEE Sensors 2015 Conference Proceedings. IEEE, p. 1426-1429 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  24. One-step large-scale deposition of salt-free DNA origami nanostructures

    Linko, V., Shen, B., Tapio, K., Toppari, J. J., Kostiainen, M. A. & Tuukkanen, S., 23 Oct 2015, In : Scientific Reports. 5, 8 p., 15634.

    Research output: Contribution to journalArticleScientificpeer-review

  25. Preparation of Supercapacitors on Flexible Substrates with Electrodeposited PEDOT/Graphene Composites

    Lehtimäki, S., Suominen, M., Damlin, P., Tuukkanen, S., Kvarnström, C. & Lupo, D., 14 Oct 2015, In : ACS Applied Materials and Interfaces. 7, 40, p. 22137-22147 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  26. Measuring optical anisotropy in poly(3,4-ethylene dioxythiophene): poly(styrene sulfonate) films with added graphene

    Isoniemi, T., Tuukkanen, S., Cameron, D. C., Simonen, J. & Toppari, J. J., 9 Jul 2015, In : Organic Electronics. 25, p. 317-323 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  27. Characteristics of Piezoelectric Polymer Film Sensors With Solution-Processable Graphene-Based Electrode Materials

    Rajala, S., Tuukkanen, S. & Halttunen, J., Jun 2015, In : IEEE Sensors Journal. 15, 6, p. 3102-3109 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  28. Piezoelectric sensitivity measurements of cellulose nanofibril sensors

    Rajala, S., Vuoriluoto, M., Rojas, O., Franssila, S. & Tuukkanen, S., 2015, IMEKO XXI World Congress, Proceedings, August 30 - September 4, 2015, Prague, Czech Republic. Holub, J. (ed.). 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  29. Pigment-Cellulose Nanofibril Composite and Its Application as a Separator-Substrate in Printed Supercapacitors

    Torvinen, K., Lehtimäki, S., Keränen, J. T., Sievänen, J., Vartiainen, J., Hellén, E., Lupo, D. & Tuukkanen, S., 2015, In : Electronic Materials Letters. 11, 6, p. 1040-1047 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  30. Low-cost, solution processable carbon nanotube supercapacitors and their characterization

    Lehtimäki, S., Tuukkanen, S., Pörhönen, J., Moilanen, P., Virtanen, J., Honkanen, M. & Lupo, D., Nov 2014, In : Applied Physics A-Materials Science and Processing. 117, 3, p. 1329-1334 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  31. Printable, Transparent, and Flexible Touch Panels Working in Sunlight and Moist Environments

    Vuorinen, T., Zakrzewski, M., Rajala, S., Lupo, D., Vanhala, J., Palovuori, K. & Tuukkanen, S., 29 Oct 2014, In : Advanced Functional Materials. 24, 40, p. 6340-6347 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  32. Flexible Piezoelectric Energy Harvesting Circuit With Printable Supercapacitor and Diodes

    Pörhönen, J., Rajala, S., Lehtimäki, S. & Tuukkanen, S., Sep 2014, In : IEEE Transactions on Electron Devices. 61, 9, p. 3303-3308 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  33. Performance of printable supercapacitors in an RF energy harvesting circuit

    Lehtimäki, S., Li, M., Salomaa, J., Pörhönen, J., Kalanti, A., Tuukkanen, S., Heljo, P., Halonen, K. & Lupo, D., Jun 2014, In : International Journal of Electrical Power and Energy Systems. 58, p. 42-46 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  34. Stretching of solution processed carbon nanotube and graphene nanocomposite films on rubber substrates

    Tuukkanen, S., Hoikkanen, M., Poikelispää, M., Honkanen, M., Vuorinen, T., Kakkonen, M., Vuorinen, J. & Lupo, D., May 2014, In : Synthetic Metals. 191, p. 28-35 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  35. Use of microcutting for high throughput electrode patterning on a flexible substrate

    Janka, M., Tuukkanen, S., Tuorila, H., Viheriälä, J., Honkanen, M., Stingelin, N. & Lupo, D., Jan 2014, In : Journal of Micromechanics and Microengineering. 24, 1, 7 p., 015015.

    Research output: Contribution to journalArticleScientificpeer-review

  36. Fabrication and characterization of solution-processed carbon nanotube supercapacitors

    Lehtimäki, S., Pörhönen, J., Tuukkanen, S., Moilanen, P., Virtanen, J. & Lupo, D., 2014, 2013 MRS Fall Meeting - Symposium SS/XX - Micro- and Nanoscale Systems - Novel Materials, Structures and Devices. MATERIALS RESEARCH SOCIETY

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  37. Modelling of Joule heating based self-alignment method for metal grid line passivation

    Janka, M., Raumonen, P., Tuukkanen, S. & Lupo, D., 2014, 2013 MRS Fall Meeting - Symposium M - Large-Area Processing and Patterning for Active Optical and Electronic Devices. MATERIALS RESEARCH SOCIETY, 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  38. Printable and disposable supercapacitor from nanocellulose and carbon nanotubes

    Tuukkanen, S., Lehtimäki, S., Jahangir, F., Eskelinen, A-P., Lupo, D. & Franssila, S., 2014, ESTC 2014, 5th Electronics System-Integration Technology Conference, September 16 – 18, 2014, Helsinki, Finland. Institute of Electrical and Electronics Engineers IEEE, p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  39. Spray coating of self-aligning passivation layer for metal grid lines

    Vuorinen, T., Janka, M., Rubingh, J. E., Tuukkanen, S., Groen, P. & Lupo, D., 2014, 2014 Electronics System-Integration Technology Conference (ESTC), 16-18 September 2014, Helsinki, Finland. Institute of Electrical and Electronics Engineers IEEE, p. 1-3 3 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  40. Low-Temperature Solution Processable Electrodes for Piezoelectric Sensors Applications

    Tuukkanen, S., Julin, T., Rantanen, V., Zakrzewski, M., Moilanen, P. & Lupo, D., 2013, In : Japanese Journal of Applied Physics. 52, 5, p. 1-4 4 p., 05DA06.

    Research output: Contribution to journalArticleScientificpeer-review

  41. Printed diodes: physics and applications

    Lupo, D., Lilja, K., Heljo, P., Tuukkanen, S. & Li, M., 2012, Proceedings of 5th International Symposium Technologies for Polymer Electronics (TPE 12). Bibliografische Information der Deutschen Nationalbibliothek, p. 42-47

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  42. Solution-processible electrode materials for a heat-sensitive piezoelectric thin-film sensor

    Tuukkanen, S., Julin, T., Rantanen, V., Zakrzewski, M., Moilanen, P., Lilja, K. E. & Rajala, S., 2012, In : Synthetic Metals. 162, 21-22, p. 1987-1995

    Research output: Contribution to journalArticleScientificpeer-review

  43. Charge Pump Circuit Using Printed Organic Diodes and Capacitors

    Heljo, P., Lilja, K. E., Tuukkanen, S. & Lupo, D., 2011, LOPE-C; Large-area, Organic & Printed Electronics Convention, June 28-30, 2011, Frankfurt, Germany. Frankfurt: Electronics Association, p. 53-55 (Large-area, Organic & Printed Electronics Convention LOPE-C).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  44. Effect of dielectric barrier on rectification, injection and transport properties of printed organic diodes

    Lilja, K. E., Majumdar, H. S., Lahtonen, K., Heljo, P., Tuukkanen, S., Joutsenoja, T., Valden, M., Österbacka, R. & Lupo, D., 2011, In : Journal of Physics D: Applied Physics. 44, p. 1-6 6 p., 294301.

    Research output: Contribution to journalArticleScientificpeer-review

  45. Printed organic rectifying diodes: Issues, interfaces and applications

    Lupo, D., Lilja, K., Heljo, P. & Tuukkanen, S., 2011, Proceedings of American Association of Textile Chemists and Colorists International Conference 2011 (AATCC 2011). Curran Associates

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  46. Self-alignment method for solution-processable dielectric structures via joule heating

    Janka, M., Tuukkanen, S., Joutsenoja, T. & Lupo, D., 2011, In : Thin Solid Films. 519, 19, p. 6587-6590

    Research output: Contribution to journalArticleScientificpeer-review

  47. Testing the effects of temperature cycling on tantalum capacitors

    Virkki, J. & Tuukkanen, S., 2010, In : Microelectronics Reliability. 50, 8, p. 1121-1124

    Research output: Contribution to journalArticleScientificpeer-review

  48. Usability of HTSL and LTSL tests at component level

    Virkki, J. & Tuukkanen, S., 2010, The Seventh International New Exploratory Technologies Conference NEXT 2010, October 19-21, 2010, University of Turku, Finland. p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  49. Direct conductance measurements of short single DNA molecules in dry conditions

    Dulic, D., Tuukkanen, S., Chung, C. L., Isambert, A., Lavie, P. & Filoramo, A., 2009, In : Nanotechnology. 20, 11, 115502

    Research output: Contribution to journalArticleScientificpeer-review

  50. Toward full carbon interconnects: High conductivity of individual carbon nanotube to carbon nanotube regrowth junctions

    Tuukkanen, S., Streiff, S., Chenevier, P., Pinault, M., Jeong, H. J., Enouz-Vedrenne, S., Cojocaru, C. S., Pribat, D. & Bourgoin, J. P., 2009, In : Applied Physics Letters. 95, 11, 113108

    Research output: Contribution to journalArticleScientificpeer-review

  51. Trapping of 27 bp-8 kbp DNA and immobilization of thiol-modified DNA using dielectrophoresis

    Tuukkanen, S., Kuzyk, A., Toppari, J. J., Häkkinen, H., Hytönen, V. P., Niskanen, E., Rinkiö, M. & Törmä, P., 2007, In : Nanotechnology. 18, 295204, p. 10 p

    Research output: Contribution to journalArticleScientificpeer-review

  52. Carbon nanotubes as electrodes for dielectrophoresis of DNA

    Tuukkanen, S., Toppari, J. J., Kuzyk, A., Hirviniemi, L., Hytönen, V. P., Ihalainen, T. & Törmä, P., 2006, In : Nano Letters. 6, 7, p. 1339-1343

    Research output: Contribution to journalArticleScientificpeer-review

  53. Dielectrophoresis as a tool for nanoscale DNA manipulation

    Tuukkanen, S., Toppari, J. J., Hytönen, V. P., Kuzyk, A., Kulomaa, M. S. & Törmä, P., 2005, In : International Journal of Nanotechnology. 2, 3, p. 280-291

    Research output: Contribution to journalArticleScientificpeer-review

  54. Dielectrophoresis of nanoscale double-stranded DNA and humidity effects on its electrical conductivity

    Tuukkanen, S., Kuzyk, A., Toppari, J. J., Hytönen, V. P., Ihalainen, T. & Törmä, P., 2005, In : Applied Physics Letters. 87, 18, 183102

    Research output: Contribution to journalArticleScientificpeer-review

  55. Fabrication of DNA monolayers on gold substrates and guiding of DNA with electric field

    Tuukkanen, S., Virtanen, J., Hytonen, V. P., Kulomaa, M. S. & Torma, P., Dec 2003, In : Reviews on Advanced Materials Science. 5, 3, p. 228-231 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

Thesis supervision, examination and instruction at other universities

Jani Jylhä, 2014. Bachelor thesis, Aalto University, Mechanical properties of Graphene.

Ilmari Harilainen, 2014. Bachelor thesis, Aalto University, Self-healing materials.

Mostafa Aseem, 2014. Bachelor thesis, Aalto University, Flexible displays and photo-detectors.

Jean-Charles Fontanier, 2012. Bachelor's thesis (exchange student at TUT from Polytech’ Montpellier, France), Tampere University of Technology, Printability and wettability of conductive inks for supercapacitor.

Petri Heljo, 2010. Master’s Thesis, Tampere University of Technology, High frequency characterization of printed organic diodes.Jani Jylhä, 2014. Bachelor thesis, Aalto University, Mechanical properties of Graphene.

Harri Niiranen, 2004. Bachelor’s thesis, University of Jyväskylä, Fabrication of multilayer structure for DNA-sensor.

Grants prior to year 2014

2003, Finnish Cultural Foundation, 10.000 € grant for the salary of researcher.

2004, Emil Aaltonen Foundation, 2.500 € grant for conference travelling costs.

2005, Ulla Tuominen Foundation, 2.000 € grant to PhD work.

2010, Postdoctoral Researcher’s project 2011-2013, funded by the Academy of Finland.

Dissertation supervision and instruction at TUT (since 2008)

Suvi Lehtimäki, PhD theses. Graduated 2017. Printed Supercapacitors for Energy Harvesting Applications. (Instructor, Role: co-supervisor).

Language skills

Finnish:            Native speaker

English:            Excellent

French:            Good

Swedish:          Satisfactory

Projects

Toiminnallinen ihmissolupohjainen sydänmalli: Toiminnallinen ihmissolupohjainen sydänmalli biolääketieteelliseen tutkimukseen ja testaukseen

Tuukkanen, S.

1/09/1730/08/21

ID: 73295