Tampere University of Technology

TUTCRIS Research Portal

Timo Lehtonen

  1. 2019
  2. Published

    Empirical study of good, bad and ugly modular engineering solutions in machinery manufacturing industry

    Juuti, T., Pakkanen, J. & Lehtonen, T., 26 Jul 2019, Proceedings of the Design Society: International Conference on Engineering Design: The 22nd International Conference on Engineering Design, ICED19, Delft, The Netherlands, 5-8 August 2019. Cambridge University Press, p. 2981-2990 10 p. (Proceedings of the Design Society: International Conference on Engineering Design ).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  3. Published

    Circular economy in integrated product and production development education

    Lanz, M., Nylund, H., Lehtonen, T., Juuti, T. & Rattya, K., 2019, In : Procedia Manufacturing. 33, p. 470-476 7 p.

    Research output: Contribution to journalConference articleScientificpeer-review

  4. Accepted/In press

    Value creation mechanisms of modularisation and engineering asset lifecycle

    Pakkanen, J., Juuti, T. & Lehtonen, T., 2019, (Accepted/In press) Engineering Assets and Public Infrastructures in the Age of Digitalization: WCEAM, Proceedings of the 13th World Congress on Engineering Asset Management, 24th-26th September, Stavanger, Norway. Springer, 8 p. 120

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  5. 2018
  6. Published

    Identifying and addressing challenges in the engineering design of modular systems – case studies in the manufacturing industry

    Pakkanen, J., Juuti, T. & Lehtonen, T., 29 Nov 2018, In : Journal of Engineering Design. 30 p.

    Research output: Contribution to journalArticleScientificpeer-review

  7. Published

    From systematic design process towards teaching product designer's toolkit

    Lehtonen, T., Juuti, T., Rättyä, K., Pakkanen, J. & Vanhatalo, M., 5 Sep 2018, Proceedings of 20th International Conference on Engineering & Product Design  Education: 6 & 7 September 2018, Dyson School of Design Engineering, Imperial College London, UK. Bohemia, E., Kovacevic, A., Buck, L., Childs, P., Green, S., Hall, A. & Dasan, A. (eds.). The Design Society, Vol. 93. p. 92-97 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  8. Published

    Evaluating the value and costs of technology in the manufacturing industry

    Mämmelä, J., Juuti, T., Korhonen, T., Julkunen, P., Lehtonen, T., Pakkanen, J. & Vanhatalo, M., 17 Aug 2018, Proceedings of the 2018 Norddesign conference (NDES2018): August 14-17, 2018, Linköping, Sweden.. Ekströmer, P., Schütte, S. & Ölvander, J. (eds.).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  9. Published

    Value creation mechanisms in product variety development

    Pakkanen, J., Juuti, T. & Lehtonen, T., 21 May 2018, DS92: Proceedings of the DESIGN 2018 15th International Design Conference. Marjanović, D., Štorga, M., Škec, S., Bojčetić, N. & Pavković, N. (eds.). The Design Society, Vol. 2. p. 623-632 10 p. (DESIGN).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  10. 2017
  11. Published

    Pedagogical Content Knowledge in Product Development Education

    Juuti, T., Rättyä, K., Lehtonen, T. & Kopra, M-J., 7 Sep 2017, Proceedings of the 19th International Conference on Engineering and Production Design Education, 2017, Oslo, Norway, 7th - 8th September 2017 . The Design Society, p. 483-488 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  12. Published

    Suomalaiset ambulanssit

    Lehtonen, T., 2017, Suomi turvassa 100 vuotta. Mobilia säätiö, p. 36-45 10 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

  13. Published

    Suomen linja-autot - koriteollisuus 2000-luvulla

    Lehtonen, T., 2017, Kustantaja Laaksonen. 192 p.

    Research output: Book/ReportBookProfessional

  14. 2016
  15. Published

    Achieving Benefits with Design Reuse in Manufacturing Industry

    Pakkanen, J., Huhtala, P., Juuti, T. & Lehtonen, T., 9 Aug 2016, 26th CIRP Design Conference. Vol. 50. p. 8-13 6 p. (Procedia CIRP; vol. 50).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  16. Published

    Brownfield Process: A method for modular product family development aiming for product configuration

    Pakkanen, J., Juuti, T. & Lehtonen, T., 2016, In : DESIGN STUDIES. 45B, p. 210-241 32 p.

    Research output: Contribution to journalArticleScientificpeer-review

  17. Published

    Challenges and opportunities in capturing design knowledge

    Lehtonen, T., Halonen, N., Pakkanen, J., Juuti, T. & Huhtala, P., 2016, Proceedings of the 10th World Congress on Engineering Asset Management (WCEAM 2015). Springer International Publishing, p. 389-395 8 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  18. Published

    How to benefit from learning logs in engineering education?

    Juuti, T., Kopra, M. J., Rättyä, K. & Lehtonen, T., 2016, 44th Annual Conference of the European Society for Engineering Education - Engineering Education on Top of the World: Industry-University Cooperation, SEFI 2016. European Society for Engineering Education SEFI

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  19. Published

    Leadership instead of grading - The new goals of assessment

    Lehtonen, T., Juuti, T., Vanhatalo, M., Kopra, M. J. & Rättyä, K., 2016, 44th Annual Conference of the European Society for Engineering Education - Engineering Education on Top of the World: Industry-University Cooperation, SEFI 2016. European Society for Engineering Education SEFI, 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  20. Published

    Learning logs in product development education

    Juuti, T., Rättyä, K. & Lehtonen, T., 2016, Proceedings of the 18th International Conference on Engineering and Product Design Education: Design Education: Collaboration and Cross-Disciplinarity, E and PDE 2016. Institution of Engineering Designers, The Design Society, p. 296-301 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  21. 2015
  22. Published

    Brownfield process for the rationalisation of existing product variety towards a modular product family

    Pakkanen, J., Juuti, T. & Lehtonen, T., 2015, ICED 15, vol 7: Product Modularisation, Product Architecture, Systems Engineering, Product Service Systems. Weber, C., Husung, S., Cascini, G., Cantamessa, M., Marjanovic, D. & Rotini, F. (eds.). The Design Society, Vol. 7. 10 p. (International Conference on Engineering Design).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  23. Published

    Champion tools: The facilitator's handbook

    Juuti, T., Kopra, M-J., Lehtonen, T., Tuokko, R. & Lanz, M., 2015, Tampere: Tampere University of Technology. Department of Mechanical Engineering and Industrial Systems. 68 p.

    Research output: Book/ReportBookProfessional

  24. 2014
  25. Published

    Design reasoning patterns in NPD education design

    Juuti, T., Lehtonen, T., Rättyä, K., Halonen, N., Vanhatalo, M. & Kujansuu, P., 2014, Proceedings of 16th International Conference on Engineering and Product Design Education, University of Twente, Enschede, The Netherlands 4th-5th September 2014. Bohemia, E., Eger, A., Eggink, W., Kovacevic, A., Parkinson, B. & Wits, W. (eds.). The Design Society, p. 682-687 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  26. Published

    Impacts of making design decision sequence explicit on NPD project in forest machinery company

    Halonen, N., Lehtonen, T. & Juuti, T., 2014, Proceedings of 10th NordDesign 2014 Conference, Espoo, August 27-29, Aalto University. Laakso, M. & Ekman, K. (eds.). Espoo: Aalto Desingn Factory, p. 702-711 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  27. Published

    Product life cycle disposition model

    Halonen, N., Lehtonen, T., Pakkanen, J., Juuti, T., Ellman, A. & Riitahuhta, A., 2014, Proceedings of the DESIGN 2014 13th International Design Conference , May 19-22, 2014, Dubrovnik - Croatia. Majanovic, D., Storga, M., Pavkovic, N. & Bojcetic, N. (eds.). Croatia: The Design Society, p. 831-840 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  28. 2013
  29. Published

    Product strategies in merchant ship and airliner industries

    Lehtinen, J., Lehtonen, T., Pakkanen, J. & Riitahuhta, A., 2013, Proceedings of the 19th International Conference on Engineering Design, ICED 13, Design for Harmonies, Vol 3: Design Organisation and Management, 19th-22nd August 2013, Sungkyunkwan University, Seoul, Korea. Lindemann, U., Venkataraman, S., Kim, Y. S., Lee, S. W., de Weck, O. & Hong, Y. S. (eds.). Scotland: The Design Society, p. 201-210 10 p. (International Conference on Engineering Design).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  30. Published

    Pyörät ja pyssyt

    Kylliäinen, M., Partanen, S., Ojanen, O. J., Tikander, V., Katjamäki, T., Kortti, J., Piltz, M., Lempinen, O., Lehtonen, T., Lehtomäki, K. & Lilja, E., 2013, Kahdella pyörällä. Kirsi, L. (ed.). 246: Mobilia säätiö, p. 71-77

    Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

  31. Published

    Retrospective study on teaching engineering design and product development

    Lehtonen, T., Juuti, T., Rättyä, K. & Vanhatalo, M., 2013, E&PDE 2013, the 15th international conference on engineering and product design education, Design education - Growing our future, Dublin, Ireland, 5-6 September, 2013. Bohemia, E., Ion, W., Kovacevic, A., Lawlor, J., McGrath, M., McMahon, C., Parkinson, B., Reilly, G., Ring, M., Simpson, R. & Tormey, D. (eds.). Glasgow: The Design Society, Institution of Engineering Designers, p. 414-419 6 p. (International Conference on Engineering and Product Design Education).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  32. Published

    The module system and its requirements for PDM/PLM systems

    Pakkanen, J., Lehtinen, J., Juuti, T. & Lehtonen, T., 2013, Proceedings of the PDM2013 conference, The 1st PDM Forum for Finland-Russia Collaboration, 24.-25.4.2013, Lappeenranta. Huhtala, M. & Eskelinen, H. (eds.). Lappeenranta: Lappeenranta University of Technology, p. 91-97 7 p. (LUT Scientific and Expertise Publications. Tutkimusraportit; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  33. 2012
  34. Published

    Achieving integrated product and production development with knowledge creation and flow model

    Lehtonen, T., Pakkanen, J., Juuti, T., Vanhatalo, M. & Becker, I., 2012, The 22nd International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2012, 10-13 June, 2012, Helsinki, Finland. Hasse, N., Satu, K., Ville, T. & Seppo, T. (eds.). Tampere: Tampere University of Technology. Department of Production Engineering, p. 357-364 (International Conference on Flexible Automation and Intelligent Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  35. Published

    A Framework for evaluating applicability of design methodologies

    Vanhatalo, M., Lehtonen, T., Juuti, T., Pakkanen, J. & Riitahuhta, A., 2012, The 12th International Design Conference, DESIGN 2012, 21-24 May, 2012, Dubrovnik, Croatia. Dorian, M., Mario, S., Neven, P. & Nenad, B. (eds.). Zagreb: Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, p. 1167-1176 (International Design Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  36. Published

    Capturing the flows of the product process

    Pakkanen, J., Becker, I., Lehtonen, T. & Juuti, T., 2012, The 12th International Design Conference, DESIGN 2012, 21-24 May, 2012, Dubrovnik, Croatia. Dorian, M., Mario, S., Neven, P. & Nenad, B. (eds.). Zagreb: Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, p. 1557-1566 (International Design Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  37. Published

    Factors affecting to exploitation of modularity

    Lehtinen, J., Lehtonen, T., Juuti, T. & Riitahuhta, A., 2012, Proceedings of The Ninth Norddesign Conference 2012, 22-24 August, 2012, Aalborg, Denmark. Poul, K. H. J. R., Kaj, J. & Christian, T. (eds.). Aalborg, Denmark: Aalborg university, p. 1-10 10 p. (Norddesign conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  38. Published

    Product development education - Conceptual modelling, knowledge integration and metacognition

    Juuti, T., Lehtonen, T. & Rättyä, K., 2012, 4th International Conference on Engineering and Product Design Education: Design Education for Future Wellbeing, EPDE 2012, 6-7 September, Antwerp; Belgium. p. 83-88 6 p. (International Conference on Engineering and Product Design Education).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  39. 2011
  40. Published

    A Framework for developing viable design methodologies for industry

    Lehtonen, T., Juuti, T., Oja, H., Suistoranta, S., Pulkkinen, A. & Riitahuhta, A., 2011, Proceedings of the 18th International Conference on Engineering Design, ICED 11, 15-18 August, 2011, Technical University of Denmark, Copenhagen, Denmark. Culley, S. J., Hicks, B. J., McAloone, T. C., Howard, T. J. & Clarkson, J. (eds.). Glasgow: The Design Society, p. 405-416 (International Conference on Engineering Design ICED; vol. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  41. Published

    Brownfield process for developing of product families

    Lehtonen, T., Pakkanen, J., Järvenpää, J., Lanz, M. & Tuokko, R., 2011, Proceedings of the 18th International Conference on Engineering Design, ICED 11, 15-18 August, 2011, Technical University of Denmark, Copenhagen, Denmark. Culley, S. J., Hicks, B. J., McAloone, T. C., Howard, T. J. & Clarkson, J. (eds.). Glasgow: The Design Society, p. 248-257 (International Conference on Engineering Design ICED; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  42. Published

    Effects of team role assessment in problem based group work learning

    Vanhatalo, M., Lehtonen, T., Hälikkä, A., Pakkanen, J. & Juuti, T., 2011, Design education for creativity and business innovation, proceedings of the 13th International Conference on Engineering and product design education, E&PDE 2011, 8-9 September, 2011, City University of London, UK. Kovacevic, A., Ion, W., McMahon, C., Buck, L. & Hogarth, P. (eds.). London: City University, p. 193-198 (International Conference on Engineering and Product Design Education E&PDE).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  43. Published

    Linja-autoliikennöitsijät ja tavaralinjaliikenne

    Lehtonen, T., 2011, Yölinjalla. Levä, K. (ed.). Mobilia, p. 58-65

    Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

  44. Published

    Open Product Development

    Riitahuhta, A., Lehtonen, T., Pulkkinen, A. & Huhtala, P., 2011, The future of design methodology. Birkhofer, H. (ed.). London: Springer, p. 135-146

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  45. Published

    Pula-ajan bussit 1945-1956: Vuosien 1945-1956 uudet linja-autot

    Rajasalo, J., Lehtonen, T. & Laitinen, H., 2011, Tampere: Suomen Linja-autohistoriallinen Seura ry.

    Research output: Book/ReportBookProfessional

  46. 2010
  47. Published

    Design management in product development organisation - the elaboration of comprehensive design management model

    Juuti, T. & Lehtonen, T., 2010, NordDesign 2010 Conference, 25-27 August, 2010, Göteborg, Sweden. Dagman, A. & Söderberg, R. (eds.). p. 65-74

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  48. Published

    Early phase concept evaluation

    Vanhatalo, M., Pakkanen, J., Lehtonen, T., Riitahuhta, A. & Juuti, T., 2010, NordDesign 2010 Conference, 25-27 August, 2010, Göteborg, Sweden. Dagman, A. & Söderberg, R. (eds.). p. 10 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  49. Published

    Elävien kuvien linja-auto

    Lehtonen, T., 2010, Peltitähdet - Auto elokuvissa. Levä, K. (ed.). Kerava: Mobilia säätiö, p. 83-94

    Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

  50. Published

    Information management challenges and enabling factors for utilizing virtual product builds

    Mela, J., Järvenpää, E., Velez, R., Lehtonen, T. & Riitahuhta, A., 2010, The 7th International Conference on Product Lifecycle Management, PLM 10, 12-14 July, 2010, BIBA University of Bremen, Germany. Bremen: BIBA-Bremen Institut Für Produktion und Logistik GmbH, p. 15 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  51. Published

    The goals of assessment

    Vanhatalo, M., Lehtonen, T., Juuti, T., Pakkanen, J. & Riitahuhta, A., 2010, Proceedings of The 12th International Conference on Engineering and Product Design Education, When Design Education and Design Research meet..., Norwegian University of Science and Technology, 2-3 September, 2010, Trondheim, Norway. E&PDE2010, p. 6 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  52. Published

    Tool for concept evaluation based on the properties of the concept and the business environment

    Vanhatalo, M., Lehtonen, T., Pakkanen, J., Juuti, T. & Riitahuhta, A., 2010, Proceeding of 11th International Design Conference DESIGN 2010, 17-20 May, 2010, Dubrovnik, Croatia. p. 965-974

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  53. 2009
  54. Published

    Introduction and evaluation of the automatic peer evaluation tool

    Kallela, T., Luostarinen, P., Lanz, M., Lehtonen, T. & Riitahuhta, A., 2009, Proceeding of 11th International conference on engineering and product design education, EPDE'09, Creating a better World, 10.-11. September, 2009, University of Brighton, UK. p. 6

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  55. Published

    Koulubussi ja -taksi

    Lehtonen, T., 2009, Koulutiellä. Levä, K. (ed.). Kangasala: Mobilia, p. 70-79

    Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

  56. Published

    Next generation business oriented and user centered design management approach

    Mela, J., Juuti, T., Lehtonen, T. & Riitahuhta, A., 2009, The 17th International conference on engineering design, ICED'09, 24-27 August, 2009, Stanford, CA, USA. p. 12 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  57. Published

    On the development of product family architectures; comparison of business-oriented and function -based product structuring

    Lehtonen, T., Juuti, T., Mela, J. & Riitahuhta, A., 2009, The 17th International conference on engineering design, ICED'09, 24-27 August, 2009, Stanford, CA, USA. p. 12 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  58. 2008
  59. Published

    Design education with simulation games

    Juuti, T., Lehtonen, T. & Hansen, P. K., 2008, Proceedings of NordDesign 2008, August 21-23, 2008, Tallinn University of Technology, Tallinn, Estonia. Roosimölder, L. (ed.). p. 325-332

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  60. Published

    Design education with simulation games

    Juuti, T., Hansen, P. K. & Lehtonen, T., 2008, Proceedings of the 10th Engineering and product design Eduacation International Conference, 4-5 September, 2008, Universitat Politecnica de Catalunya, Barcelona, Spain. Clarke, A., Evatt, M., Hogarth, P., Lloveras, J. & Pons, L. (eds.). p. 811-816

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  61. Published

    Enabling factors for managing intellectual resources in engineering design

    Mela, J., Lehtonen, T., Riitahuhta, A. & Juuti, T., 2008, Proceedings of the Design 2008, 10th International design conference, May 19.22, 2008, Cavtat, Dubrovnik, Croatia. Marjanovic, D., Storga, M., Pacikovic, N. & Bojcetic, N. (eds.). p. 959-970

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  62. Published

    Linja-autoliikennöitsijät tienpitäjinä

    Lehtonen, T., 2008, In : TVH - valtion tiet. p. 88-92

    Research output: Contribution to journalArticleProfessional

  63. 2007
  64. Published

    Designing modular product architecture in the new product development

    Lehtonen, T., 7 Dec 2007, Tampere: Tampere University of Technology. 220 p. (Tampere University of Technology. Publication; vol. 713)

    Research output: Book/ReportDoctoral thesisMonograph

  65. Published

    Linja-auto sotilaskuljetuksessa

    Lehtonen, T., 2007, In : SA INT Auto sodassa ja rauhassa. p. 87-93

    Research output: Contribution to journalArticleGeneral public

  66. Published

    Managing re-use for agile new product development

    Juuti, T., Lehtonen, T. & Riitahuhta, A., 2007, 16th International Conference on Engineering Desing, ICED'07, Design for society, Knowledge, innovation and Sustainability, 28-30 August, 2007, Paris, France. p. 11 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  67. Published

    Observation on the abilities of design methodologies to produce different product structures

    Lehtonen, T., Juuti, T. & Riitahuhta, A., 2007, 16th International Conference on Engineering Desing, ICED'07, Design for society, Knowledge, innovation and Sustainability, 28-30 August, 2007, Paris, France. p. 11 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  68. 2006
  69. Published

    Using multiple modular structures in delivering complex products

    Juuti, T. & Lehtonen, T., 2006, Proceedings of NordDesign 2006 conference, 16-18 August 2006, Reykjavik, Island. Jónsson, M. & Unnbórsson, R. (eds.). p. 266-276

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  70. Published

    Uuden autoluokan synty ja kehitys, pieni bussi - suuri taksi

    Lehtonen, T., 2006, In : Valoa yössä!. p. 80-87

    Research output: Contribution to journalArticleProfessional

  71. 2005
  72. Published

    Katurin vuosikymmen

    Lehtonen, T., 2005, Maantien ässät - Linja-auto 100 vuotta Suomessa. Mobilia säätiö, p. 65-73

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  73. Published

    Kutter 8 korimallin tuotehistoria

    Laitinen, H. & Lehtonen, T., 2005, Suomen Linja-autohistoriallinen Seura ry. 82 p.

    Research output: Book/ReportBookGeneral public

  74. Published

    Origins and prospects of platform based product paradigm

    Lehtonen, T., Juuti, T., Pulkkinen, A., Roikola, A-M. & Riitahuhta, A., 2005, Engineering desing and the global economy, Proceedings of 15th International conference on engineering design (ICED'05), 15-18 August, 2005, The Grand Hyatt Melbourne, Australia. Samuel, A. & Lewis, W. (eds.). p. 502-503

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  75. Published

    Oudoissa merkeissä pula-ajan linja-autot

    Lehtonen, T., 2005, Maantien ässät - Linja-auto 100 vuotta Suomessa. Mobilia säätiö, p. 46-55

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  76. 2004
  77. Published

    Characterising modular product families for configuration

    Pulkkinen, A., Lehtonen, T. & Riitahuhta, A., 2004, Product Platform Development, Proceedings of the 7th Workshop on Product Structuring, March 24-25, 2004, Göteborg, Sweden. Malmqvist, J. (ed.). p. 13-23

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  78. Published

    Dynamics of product platform lifecycle and disposition management

    Lehtonen, T., Juuti, T., Pulkkinen, A. & Riitahuhta, A., 2004, Product Platform Development, Proceedings of th 7th Workshop on Product Structuring, March 24-25, 2004, Göteborg, Sweden. Malmqvist, J. (ed.). p. 133-139

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  79. Published

    Efficient platform utilisation with configurable products - Enabling factors illustrated

    Juuti, T., Lehtonen, T. & Riitahuhta, A., 2004, Product Platform Development, Proceedings of th 7th Workshop on Product Structuring, March 24-25, 2004, Göteborg, Sweden. Malmqvist, J. (ed.). p. 121-131

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  80. Published

    Linja-automatkailun loisteliaat vuosikymmenet

    Lehtonen, T., 2004, Ralliraitaa, karvanoppaa, levikkeitä kaikilla herkuilla, lisävarustelu kautta aikojen. Levä, K. (ed.). p. 37-47

    Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

  81. Published

    Satavuotias Büssing

    Lehtonen, T., 2004, In : Automobiili. 2, p. 12-16

    Research output: Contribution to journalArticleProfessional

  82. Published

    Satavuotias Büssing 1960-luvulta MAN:in haltuun

    Lehtonen, T., 2004, In : Automobiili. 4, p. 19-21

    Research output: Contribution to journalArticleProfessional

  83. Published

    Satavuotias Büssing 2. maailmansodan jälkeinen aika 1960-luvulle

    Lehtonen, T., 2004, In : Automobiili. 3, p. 16-18

    Research output: Contribution to journalArticleProfessional

  84. 2003
  85. Published

    Case study: Partial configuring for Engineering productivity

    Pulkkinen, A., Lehtonen, T. & Riitahuhta, A., 2003, Proceedings of the 6th Workshop on Product Structuring - application of product models, 23rd and 24th of January 20 03, Technical University of Denmark. Mortensen, N. H. (ed.). p. 59-78

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  86. Published

    Characteristics of product family development in industry

    Pulkkinen, A., Lehtonen, T. & Riitahuhta, A., 2003, Proceedings of the 14th International Conference on Engineering Design, ICED 03, 19-21 August 2003, Stockholm. Folkeson, A., Grulén, K., Norell, M. & Sellgren, U. (eds.). p. 507-508

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  87. Published

    Dynamic modularisation - a challenge for design process and product architecture

    Lehtonen, T., Juuti, T., Pulkkinen, A. & Riitahuhta, A., 2003, Proceedings of the 14th International Conference on Engineering Design, ICED 03, August 19j-21, 2003, Stockholm. Folkeson, A., Grulen, K., Norell, M. & Sellgren, U. (eds.). p. 339-340

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  88. Published

    Kaupunkilinja-auton kehitys

    Lehtonen, T., 2003, Savion Kirjapaino, Kerava: Mobilia säätiö.

    Research output: Book/ReportCommissioned reportProfessional

  89. Published

    Stakeholder view effects on modularity in configurable products

    Lehtonen, T., Juuti, T., Pulkkinen, A. & Riitahuhta, A., 2003, Proceedings of the 6th Workshop on Product Structuring - application of product models, 23rd and 24th of January 20 03, Technical University of Denmark. Mortensen, N. H. (ed.). p. 25-34

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  90. Published

    Turistiautot, Suomen Turistiauto Oy:n kalustohistoria

    Lehtonen, T., Pyrhönen, K. & Poussa, J., 2003, Jyväskylä: Suomen Linja-autohistoriallinen Seura ry.

    Research output: Book/ReportBookScientificpeer-review

  91. 2002
  92. Published

    Facilitating ChangeTowards Platforms With Simulation Game

    Lehtonen, T. & Juuti, T., 2002, In: Boelskifte, P. Sigurjonsson, J.B. Proceedings of the NordDesign 2002, August 14-16, 2002, NTNU, Trondheim, Norway. p. 159-166

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  93. Published

    Suomalainen linja-autotuotanto

    Lehtonen, T., 2002, Hämeenlinna: Unknown Publisher.

    Research output: Book/ReportCommissioned reportProfessional

  94. Published

    Supporting Standard Product Platforms in Project Oriented Industry

    Tanskanen, K. & Lehtonen, T., 2002, In: Boelskifte, P., Sigurjonsson, J.B. Proceedings of the NordDesign 2002, August 14-16, 2002, NTNU, Trondheim, Norway. Trondheim, p. 325-330

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  95. 2001
  96. Published

    Adapting variant products for time critical deliveries

    Lehtonen, T., Pulkkinen, A. & Riitahuhta, A., 2001, In: Proceedings of the 16th International Conference on Production Research, Prague, 29. July - 3. August, 2001. p. 7 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  97. Published

    Late point differentiation analysis for configurable products

    Lehtonen, T. A., Riitahuhta, A. O. & Malvisalo, J. M., 2001, In:Culley, S., Duffy, A., McMahon, C., Wallace, K. Proceedings of the 13th International Conference on Engineering Design, ICED'01, Glasgow, UK, 21-23 August, 2001. p. 293-298

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  98. 2000
  99. Published

    Minimizing the need for IT support for product configuration

    Lehtonen, T., Tiihonen, J., Pulkkinen, A. & Riitahuhta, A., 2000, Proceedings, NordDesign 2000, Denmark. Hansen, C. T. (ed.). Denmark, p. 265-274

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  100. Published

    Modeling configurable product families

    Tiihonen, J., Lehtonen, T., Soininen, T., Pulkkinen, A., Sulonen, R. & Riitahuhta, A., 2000, Proceedings of the 4th WDK Workshop on Product Structuring, October 22-23, 1998, Delf, The Netherlands. Tichem, M. (ed.). Alankomaat: TUDelft, p. 29-50

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  101. 1999
  102. Published

    Design for Configuration in Enabling Agility

    Pulkkinen, A., Lehtonen, T. & Riitahuhta, A., 1999, EPA'99 3rd International Conference on Engineering Design and Automation, Vancouver, Canada, August 1-4, 1999. p. 8 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  103. Published

    Design for configuration - methodology for product family development

    Pulkkinen, A., Lehtonen, T. & Riitahuhta, A., 1999, Proceedings of the 12th International Conference on Engineering Design, ICED 99, Munich, Germany, August 24-26, 1999. Lindemann, U. (ed.). p. s- 1495-1500

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  104. Published

    Modeling configurable product families

    Tiihonen, J., Lehtonen, T., Pulkkinen, A. & Riitahuhta, A., 1999, Proceedings of the 12th International Conference on Engineering Design, ICED 99, Munich, Germany, August 24-26, 1999. Lindemann, U. (ed.). p. 24-26

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  105. 1998
  106. Published

    Enabling sales configurators for small enterprises

    Lehtonen, T., Juuti, T. & Riitahuhta, A., 1998, Proceedings, Produktmodeller -98, Novermber 10-11, 1998, Linköping, Sweden. p. 139-154

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  107. Published

    Virtues and problems of a front engined and front wheel driven citybus

    Lehtonen, T., Ahola, E., Juuti, T. & Riitahuhta, A., 1998, Proceedings of NordDesign '98, August 26-28, 1998, Stockholm, Sweden. Andersson, K. & Persson, J-G. (eds.). p. 227-236

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  108. 1997
  109. Published

    Representing Design Constraints with Graphical Notation in Design Support System

    Lehtonen, T., Paasiala, P. & Riitahuhta, A., 1997, Proceedings of the 11th International Conference on Engineering Design, August 19-21, 1997 Tampere, Finland. Riitahuhta, A. (ed.). Jyväskylä: Tampere University of Technology, p. 247-252

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

ID: 50954