Tampere University of Technology

TUTCRIS Research Portal

Corrosion Behavior of WC-Ni Coatings Deposited by Different Thermal Spraying Methods

Research output: Contribution to journalArticleScientificpeer-review

Standard

Corrosion Behavior of WC-Ni Coatings Deposited by Different Thermal Spraying Methods. / Hulka, I.; Utu, D.; Serban, V. A.; Dan, M. L.; Matikainen, V.; Vuoristo, P.

In: Chemical Bulletin of “Politehnica” University of Timisoara, ROMANIA Series of Chemistry and Environmental Engineering, Vol. 60, No. 2, 2015, p. 60-65.

Research output: Contribution to journalArticleScientificpeer-review

Harvard

Hulka, I, Utu, D, Serban, VA, Dan, ML, Matikainen, V & Vuoristo, P 2015, 'Corrosion Behavior of WC-Ni Coatings Deposited by Different Thermal Spraying Methods', Chemical Bulletin of “Politehnica” University of Timisoara, ROMANIA Series of Chemistry and Environmental Engineering, vol. 60, no. 2, pp. 60-65.

APA

Hulka, I., Utu, D., Serban, V. A., Dan, M. L., Matikainen, V., & Vuoristo, P. (2015). Corrosion Behavior of WC-Ni Coatings Deposited by Different Thermal Spraying Methods. Chemical Bulletin of “Politehnica” University of Timisoara, ROMANIA Series of Chemistry and Environmental Engineering, 60(2), 60-65.

Vancouver

Hulka I, Utu D, Serban VA, Dan ML, Matikainen V, Vuoristo P. Corrosion Behavior of WC-Ni Coatings Deposited by Different Thermal Spraying Methods. Chemical Bulletin of “Politehnica” University of Timisoara, ROMANIA Series of Chemistry and Environmental Engineering. 2015;60(2):60-65.

Author

Hulka, I. ; Utu, D. ; Serban, V. A. ; Dan, M. L. ; Matikainen, V. ; Vuoristo, P. / Corrosion Behavior of WC-Ni Coatings Deposited by Different Thermal Spraying Methods. In: Chemical Bulletin of “Politehnica” University of Timisoara, ROMANIA Series of Chemistry and Environmental Engineering. 2015 ; Vol. 60, No. 2. pp. 60-65.

Bibtex - Download

@article{e90e632aaec64291a7f48b0852d6a06b,
title = "Corrosion Behavior of WC-Ni Coatings Deposited by Different Thermal Spraying Methods",
abstract = "This study compares the properties of WC-Ni coatings manufactured from fine powder particles using high-velocity oxygen fuel (HVOF) and high-velocity air fuel (HVAF) spraying processes. The results indicated that the decarburization of carbide phase is influenced by the spraying equipment. It was found out that the deposition velocity is an important factor influencing the bonding between splats and furthermore the coating density. The WC-Ni coating sprayed with the supersonic M3 HVAF spraying gun revealed the lowest degree of porosity and degree of decarburization, achieving the best properties in terms of electrochemical corrosion resistance when compared to the HVOF sprayed WC-Ni coating.",
author = "I. Hulka and D. Utu and Serban, {V. A.} and Dan, {M. L.} and V. Matikainen and P. Vuoristo",
year = "2015",
language = "English",
volume = "60",
pages = "60--65",
journal = "Chemical Bulletin of “Politehnica” University of Timisoara, ROMANIA Series of Chemistry and Environmental Engineering",
issn = "1224-6018",
number = "2",

}

RIS (suitable for import to EndNote) - Download

TY - JOUR

T1 - Corrosion Behavior of WC-Ni Coatings Deposited by Different Thermal Spraying Methods

AU - Hulka, I.

AU - Utu, D.

AU - Serban, V. A.

AU - Dan, M. L.

AU - Matikainen, V.

AU - Vuoristo, P.

PY - 2015

Y1 - 2015

N2 - This study compares the properties of WC-Ni coatings manufactured from fine powder particles using high-velocity oxygen fuel (HVOF) and high-velocity air fuel (HVAF) spraying processes. The results indicated that the decarburization of carbide phase is influenced by the spraying equipment. It was found out that the deposition velocity is an important factor influencing the bonding between splats and furthermore the coating density. The WC-Ni coating sprayed with the supersonic M3 HVAF spraying gun revealed the lowest degree of porosity and degree of decarburization, achieving the best properties in terms of electrochemical corrosion resistance when compared to the HVOF sprayed WC-Ni coating.

AB - This study compares the properties of WC-Ni coatings manufactured from fine powder particles using high-velocity oxygen fuel (HVOF) and high-velocity air fuel (HVAF) spraying processes. The results indicated that the decarburization of carbide phase is influenced by the spraying equipment. It was found out that the deposition velocity is an important factor influencing the bonding between splats and furthermore the coating density. The WC-Ni coating sprayed with the supersonic M3 HVAF spraying gun revealed the lowest degree of porosity and degree of decarburization, achieving the best properties in terms of electrochemical corrosion resistance when compared to the HVOF sprayed WC-Ni coating.

M3 - Article

VL - 60

SP - 60

EP - 65

JO - Chemical Bulletin of “Politehnica” University of Timisoara, ROMANIA Series of Chemistry and Environmental Engineering

JF - Chemical Bulletin of “Politehnica” University of Timisoara, ROMANIA Series of Chemistry and Environmental Engineering

SN - 1224-6018

IS - 2

ER -