Tampere University of Technology

TUTCRIS Research Portal

Optimization of frequency-response-masking based FIR filters

Research output: Contribution to journalArticleScientificpeer-review

Standard

Optimization of frequency-response-masking based FIR filters. / Yli-Kaakinen, Juha; Saramäki, Tapio; Johansson, Håkan.

In: Journal of Circuits, Systems and Computers, Vol. 12, No. 5, 10.2003, p. 563–591.

Research output: Contribution to journalArticleScientificpeer-review

Harvard

Yli-Kaakinen, J, Saramäki, T & Johansson, H 2003, 'Optimization of frequency-response-masking based FIR filters', Journal of Circuits, Systems and Computers, vol. 12, no. 5, pp. 563–591. https://doi.org/10.1142/S0218126603001070

APA

Yli-Kaakinen, J., Saramäki, T., & Johansson, H. (2003). Optimization of frequency-response-masking based FIR filters. Journal of Circuits, Systems and Computers, 12(5), 563–591. https://doi.org/10.1142/S0218126603001070

Vancouver

Yli-Kaakinen J, Saramäki T, Johansson H. Optimization of frequency-response-masking based FIR filters. Journal of Circuits, Systems and Computers. 2003 Oct;12(5):563–591. https://doi.org/10.1142/S0218126603001070

Author

Yli-Kaakinen, Juha ; Saramäki, Tapio ; Johansson, Håkan. / Optimization of frequency-response-masking based FIR filters. In: Journal of Circuits, Systems and Computers. 2003 ; Vol. 12, No. 5. pp. 563–591.

Bibtex - Download

@article{0750c4b36b6e4437a75065ca89d1c4b3,
title = "Optimization of frequency-response-masking based FIR filters",
abstract = "A very efficient technique to drastically reduce the number of multipliers and adders in implementing linear-phase finite-impulse response (FIR) digital filters in applications demanding a narrow transition band is to use the frequency-response masking (FRM) approach originally introduced by Lim. The arithmetic complexity can be even further reduced using a common filter part for constructing the masking filters originally proposed by Lim and Lian. A drawback in the above-mentioned original FRM synthesis techniques is that the subfilters in the overall implementations are separately designed. In order to further reduce the arithmetic complexity in these two FRM approaches, the following two-step optimization technique is proposed for simultaneously optimizing the subfilters. At the first step, a good suboptimal solution is found by using a simple iterative algorithm. At the second step, this solution is then used as a start-up solution for further optimization being carried out by using an efficient unconstrained nonlinear optimization algorithm. An example taken from the literature illustrates that both the number of multipliers and the number of adders for the resulting optimized filter are less than 80{\%} compared with those of the FRM filter obtained using the original FRM design schemes in the case where the masking filters are separately implemented. If a common filter part is used for realizing the masking filters, then an additional reduction of more than 10{\%} is achieved compared with the optimized design with separately implemented masking filters.",
author = "Juha Yli-Kaakinen and Tapio Saram{\"a}ki and H{\aa}kan Johansson",
year = "2003",
month = "10",
doi = "10.1142/S0218126603001070",
language = "English",
volume = "12",
pages = "563–591",
journal = "Journal of Circuits, Systems and Computers",
issn = "0218-1266",
publisher = "World Scientific Publishing",
number = "5",

}

RIS (suitable for import to EndNote) - Download

TY - JOUR

T1 - Optimization of frequency-response-masking based FIR filters

AU - Yli-Kaakinen, Juha

AU - Saramäki, Tapio

AU - Johansson, Håkan

PY - 2003/10

Y1 - 2003/10

N2 - A very efficient technique to drastically reduce the number of multipliers and adders in implementing linear-phase finite-impulse response (FIR) digital filters in applications demanding a narrow transition band is to use the frequency-response masking (FRM) approach originally introduced by Lim. The arithmetic complexity can be even further reduced using a common filter part for constructing the masking filters originally proposed by Lim and Lian. A drawback in the above-mentioned original FRM synthesis techniques is that the subfilters in the overall implementations are separately designed. In order to further reduce the arithmetic complexity in these two FRM approaches, the following two-step optimization technique is proposed for simultaneously optimizing the subfilters. At the first step, a good suboptimal solution is found by using a simple iterative algorithm. At the second step, this solution is then used as a start-up solution for further optimization being carried out by using an efficient unconstrained nonlinear optimization algorithm. An example taken from the literature illustrates that both the number of multipliers and the number of adders for the resulting optimized filter are less than 80% compared with those of the FRM filter obtained using the original FRM design schemes in the case where the masking filters are separately implemented. If a common filter part is used for realizing the masking filters, then an additional reduction of more than 10% is achieved compared with the optimized design with separately implemented masking filters.

AB - A very efficient technique to drastically reduce the number of multipliers and adders in implementing linear-phase finite-impulse response (FIR) digital filters in applications demanding a narrow transition band is to use the frequency-response masking (FRM) approach originally introduced by Lim. The arithmetic complexity can be even further reduced using a common filter part for constructing the masking filters originally proposed by Lim and Lian. A drawback in the above-mentioned original FRM synthesis techniques is that the subfilters in the overall implementations are separately designed. In order to further reduce the arithmetic complexity in these two FRM approaches, the following two-step optimization technique is proposed for simultaneously optimizing the subfilters. At the first step, a good suboptimal solution is found by using a simple iterative algorithm. At the second step, this solution is then used as a start-up solution for further optimization being carried out by using an efficient unconstrained nonlinear optimization algorithm. An example taken from the literature illustrates that both the number of multipliers and the number of adders for the resulting optimized filter are less than 80% compared with those of the FRM filter obtained using the original FRM design schemes in the case where the masking filters are separately implemented. If a common filter part is used for realizing the masking filters, then an additional reduction of more than 10% is achieved compared with the optimized design with separately implemented masking filters.

U2 - 10.1142/S0218126603001070

DO - 10.1142/S0218126603001070

M3 - Article

VL - 12

SP - 563

EP - 591

JO - Journal of Circuits, Systems and Computers

JF - Journal of Circuits, Systems and Computers

SN - 0218-1266

IS - 5

ER -