Huttunen-Saarivirta E, Kilpi L, Pasanen AT, Salminen T, Ronkainen H. 2020. Tribocorrosion behaviour of tin bronze CuSn12 under a sliding motion in NaCl containing environment: Contact to inert vs. reactive counterbody. Tribology International. 151. https://doi.org/10.1016/j.triboint.2020.106389

Kivioja H, Vinha J. 2020. Hot-box measurements to investigate the internal convection of highly insulated loose-fill insulation roof structures. Energy and Buildings. 216. https://doi.org/10.1016/j.enbuild.2020.109934

Ryynänen T, Mzezewa R, Meriläinen E, Hyvärinen T, Lekkala J, Narkilahti S, Kallio P. 2020. Transparent microelectrode arrays fabricated by ion beam assisted deposition for neuronal cell in vitro recordings. Micromachines. 11(5). https://doi.org/10.3390/MI11050497

Shevkunov I, Katkovnik V, Claus D, Pedrini G, Petrov NV, Egiazarian K. 2020. Hyperspectral phase imaging based on denoising in complex-valued eigensubspace. Optics and Lasers in Engineering. 127. https://doi.org/10.1016/j.optlaseng.2019.105973

Belardini A, Leahu G, Petronijevic E, Hakkarainen T, Koivusalo E, Piton MR, Talmila S, Guina M, Sibilia C. 2020. Circular dichroism in the second harmonic field evidenced by asymmetric AU coated gaas nanowires. Micromachines. 11(2):1-8. https://doi.org/10.3390/mi11020225

Mäntylä A, Juoksukangas J, Hintikka J, Frondelius T, Lehtovaara A. 2020. FEM-based wear simulation for fretting contacts. Rakenteiden Mekaniikka. 53(1):20-27. https://doi.org/10.23998/rm.76261

Saarimaa V, Fuertes N, Persson D, Zavalis T, Kaleva A, Nikkanen J-P, Levänen E, Heydari G. 2020. Assessment of pitting corrosion in bare and passivated (wet scCO2-induced patination and chemical passivation) hot-dip galvanized steel samples with SVET, FTIR, and SEM (EDS). Materials and Corrosion. https://doi.org/10.1002/maco.202011653

Paunonen L, Seifert D. 2020. Asymptotics and approximation of large systems of ordinary differential equations. Systems and Control Letters. 140. https://doi.org/10.1016/j.sysconle.2020.104703

Juoksukangas J, Hintikka J, Lehtovaara A, Mäntylä A, Vaara J, Frondelius T. 2020. Avoiding the high friction peak in fretting contact. Rakenteiden Mekaniikka. 53(1):12-19. https://doi.org/10.23998/rm.76266

Di Vito D, Mosallaei M, Vahed BK, Kanerva M, Mäntysalo M. 2020. Deformability analysis and improvement in stretchable electronics systems through finite element analysis. Carcaterra A, Graziani G, Paolone A, editors. In Proceedings of XXIV AIMETA Conference 2019. Springer. pp. 755-763. (Lecture Notes in Mechanical Engineering). https://doi.org/10.1007/978-3-030-41057-5_61

Priimägi A, Hecht S, ed. 2020. From Responsive Molecules to Interactive Materials. Advanced Materials. 32(20). https://doi.org/10.1002/adma.202000215

Holopainen S. 2020. Käyräviivaiset koordinaatistot kontinuumimekaniikassa. Rakenteiden Mekaniikka. 53(2):53-66. https://doi.org/10.23998/rm.83338

Priimägi A, Hecht S, ed. 2020. Special Issue: From Responsive Materials to Interactive Materials. Advanced Materials. 32(20).

Chronopoulos A, Thorpe SD, Cortes E, Lachowski D, Rice AJ, Mykuliak VV, Rog T, Lee DA, Hytönen VP, del Río Hernández AE. 2020. Syndecan-4 tunes cell mechanics by activating the kindlin-integrin-RhoA pathway. Nature Materials. https://doi.org/10.1038/s41563-019-0567-1

Zhang H, Zeng H, Priimägi A, Ikkala O. 2020. Viewpoint: Pavlovian Materials—Functional Biomimetics Inspired by Classical Conditioning. Advanced Materials. https://doi.org/10.1002/adma.201906619

Santa-aho S, Laitinen A, Sorsa A, Vippola M. 2019. Barkhausen Noise Probes and Modelling: A Review. Journal of Nondestructive Evaluation. 38(4). https://doi.org/10.1007/s10921-019-0636-z

Pirjola L, Kuuluvainen H, Timonen H, Saarikoski S, Teinilä K, Salo L, Datta A, Simonen P, Karjalainen P, Kulmala K, Rönkkö T. 2019. Potential of renewable fuel to reduce diesel exhaust particle emissions. Applied Energy. 254. https://doi.org/10.1016/j.apenergy.2019.113636

Mäntylä A, Hintikka J, Frondelius T, Vaara J, Lehtovaara A, Juoksukangas J. 2019. Prediction of contact condition and surface damage by simulating variable friction coefficient and wear. Tribology International. https://doi.org/10.1016/j.triboint.2019.106054

Mäenpää P, Aref MM, Mattila J. 2019. FORMI: A Fast Holonomic Path Planning and Obstacle Representation Method Based on Interval Analysis. In Proceedings of the IEEE 2019 9th International Conference on Cybernetics and Intelligent Systems and Robotics, Automation and Mechatronics, CIS and RAM 2019. IEEE. pp. 398-403. https://doi.org/10.1109/CIS-RAM47153.2019.9095822

Motlagh HDK, Lotfi F, Taghirad HD, Germi SB. 2019. Position Estimation for Drones based on Visual SLAM and IMU in GPS-denied Environment. In ICRoM 2019 - 7th International Conference on Robotics and Mechatronics. IEEE. pp. 120-124. https://doi.org/10.1109/ICRoM48714.2019.9071826

Hintikka J, Mäntylä A, Vaara J, Frondelius T, Juoksukangas J, Lehtovaara A. 2019. Running-in in fretting, transition from near-stable friction regime to gross sliding. Tribology International. 143. https://doi.org/10.1016/j.triboint.2019.106073

Mäntyranta A, Heino V, Isotahdon E, Salminen T, Huttunen-Saarivirta E. 2019. Tribocorrosion behaviour of two low-alloy steel grades in simulated waste solution. Tribology International. 138:250-262. https://doi.org/10.1016/j.triboint.2019.05.032

Perttula A, Nguyen N, Collin J, Jokinen J-P. 2019. Vehicle type detection and passenger satisfaction analysis using smartphone sensors and digital surveys. IET Intelligent Transport Systems. 13(10):1499-1506. https://doi.org/10.1049/iet-its.2018.5349

Reshef O, Saad-Bin-Alam M, Huttunen MJ, Carlow G, Sullivan BT, Ménard JM, Dolgaleva K, Boyd RW. 2019. Multiresonant High-Q Plasmonic Metasurfaces. Nano Letters. 19(9):6429-6434. https://doi.org/10.1021/acs.nanolett.9b02638

Ylönen M, Franc JP, Miettinen J, Saarenrinne P, Fivel M. 2019. Shedding frequency in cavitation erosion evolution tracking. International Journal of Multiphase Flow. 118:141-149. https://doi.org/10.1016/j.ijmultiphaseflow.2019.06.009

Lehmusto J, Olin M, Viljanen J, Kalliokoski J, Mylläri F, Toivonen J, Dal Maso M, Hupa L. 2019. Detection of gaseous species during KCl-induced high-temperature corrosion by the means of CPFAAS and CI-APi-TOF. Materials and Corrosion. https://doi.org/10.1002/maco.201910964

Kreutzer J, Viehrig M, Pölönen RP, Zhao F, Ojala M, Aalto-Setälä K, Kallio P. 2019. Pneumatic unidirectional cell stretching device for mechanobiological studies of cardiomyocytes. BIOMECHANICS AND MODELING IN MECHANOBIOLOGY. https://doi.org/10.1007/s10237-019-01211-8

Thomas K, Mohanty G, Wehrs J, Taylor AA, Pathak S, Casari D, Schwiedrzik J, Mara N, Spolenak R, Michler J. 2019. Elevated and cryogenic temperature micropillar compression of magnesium–niobium multilayer films. Journal of Materials Science. 54(15):10884-10901. https://doi.org/10.1007/s10853-019-03422-x

Szczodra A, Mardoukhi A, Hokka M, Boetti NG, Petit L. 2019. Fluorine losses in Er3+oxyfluoride phosphate glasses and glass-ceramics. Journal of Alloys and Compounds. 797:797-803. https://doi.org/10.1016/j.jallcom.2019.05.151

Kezilebieke S, Žitko R, Dvorak M, Ojanen T, Liljeroth P. 2019. Observation of Coexistence of Yu-Shiba-Rusinov States and Spin-Flip Excitations. Nano Letters. 19(7):4614-4619. https://doi.org/10.1021/acs.nanolett.9b01583

Juoksukangas J, Nurmi V, Hintikka J, Vippola M, Lehtovaara A, Mäntylä A, Vaara J, Frondelius T. 2019. Characterization of cracks formed in large flat-on-flat fretting contact. International Journal of Fatigue. 124:361-370. https://doi.org/10.1016/j.ijfatigue.2019.03.004

Sautter JD, Xu L, Miroshnichenko AE, Lysevych M, Volkovskaya I, Smirnova DA, Camacho-Morales R, Zangeneh Kamali K, Karouta F, Vora K, Tan HH, Kauranen M, Staude I, Jagadish C, Neshev DN, Rahmani M. 2019. Tailoring Second-Harmonic Emission from (111)-GaAs Nanoantennas. Nano Letters. 19(6):3905-3911. https://doi.org/10.1021/acs.nanolett.9b01112

Vuornos K, Ojansivu M, Koivisto JT, Häkkänen H, Belay B, Montonen T, Huhtala H, Kääriäinen M, Hupa L, Kellomäki M, Hyttinen J, Ihalainen JA, Miettinen S. 2019. Bioactive glass ions induce efficient osteogenic differentiation of human adipose stem cells encapsulated in gellan gum and collagen type I hydrogels. Materials Science and Engineering C. 99:905-918. https://doi.org/10.1016/j.msec.2019.02.035

Koivikko A, Sariola V. 2019. Fabrication of soft devices with buried fluid channels by using sacrificial 3D printed molds. In 2019 2nd IEEE International Conference on Soft Robotics (RoboSoft). IEEE. pp. 509-513. https://doi.org/10.1109/ROBOSOFT.2019.8722741

Sanchez-Guevara C, Núñez Peiró M, Taylor J, Mavrogianni A, Neila González J. 2019. Assessing population vulnerability towards summer energy poverty: Case studies of Madrid and London. Energy and Buildings. 190:132-143. https://doi.org/10.1016/j.enbuild.2019.02.024

Rossi M, Liegmann E, Karamanakos P, Castelli-Dezza F, Kennel R. 2019. Direct model predictive power control of a series-connected modular rectifier. In PRECEDE 2019: 2019 IEEE International Symposium on Predictive Control of Electrical Drives and Power Electronics. IEEE. pp. 1-6. https://doi.org/10.1109/PRECEDE.2019.8753318

Wendel S, Karamanakos P, Dietz A, Kennel R. 2019. Operating point dependent variable switching point predictive current control for PMSM drives. In PRECEDE 2019: 2019 IEEE International Symposium on Predictive Control of Electrical Drives and Power Electronics. IEEE. pp. 1-6. https://doi.org/10.1109/PRECEDE.2019.8753362

Itävuo P, Hulthén E, Yahyaei M, Vilkko M. 2019. Mass balance control of crushing circuits. Minerals Engineering. 135:37-47. https://doi.org/10.1016/j.mineng.2019.02.033

Wu D, Coatanea E, Wang GG. 2019. Employing Knowledge on Causal Relationship to Assist Multidisciplinary Design Optimization. Journal of Mechanical Design, Transactions of the ASME. 141(4). https://doi.org/10.1115/1.4042342

Backas J, Ghabcheloo R. 2019. Nonlinear model predictive energy management of hydrostatic drive transmissions. Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering. 233(3):335-347. https://doi.org/10.1177/0959651818793454

Hintikka J, Mäntylä A, Vaara J, Frondelius T, Lehtovaara A. 2019. Stable and unstable friction in fretting contacts. Tribology International. 131:73-82. https://doi.org/10.1016/j.triboint.2018.10.014

Nurmi V, Hintikka J, Juoksukangas J, Honkanen M, Vippola M, Lehtovaara A, Mäntylä A, Vaara J, Frondelius T. 2019. The formation and characterization of fretting-induced degradation layers using quenched and tempered steel. Tribology International. 131:258-267. https://doi.org/10.1016/j.triboint.2018.09.012

Liimatainen H, van Vliet O, Aplyn D. 2019. The potential of electric trucks – An international commodity-level analysis. Applied Energy. 236:804-814. https://doi.org/10.1016/j.apenergy.2018.12.017

Claude S, Ginestet S, Bonhomme M, Escadeillas G, Taylor J, Marincioni V, Korolija I, Altamirano H. 2019. Evaluating retrofit options in a historical city center: Relevance of bio-based insulation and the need to consider complex urban form in decision-making. Energy and Buildings. 182:196-204. https://doi.org/10.1016/j.enbuild.2018.10.026

Pekkanen TT, Timonen RS, Lendvay G, Rissanen MP, Eskola AJ. 2019. Kinetics and thermochemistry of the reaction of 3-methylpropargyl radical with molecular oxygen. PROCEEDINGS OF THE COMBUSTION INSTITUTE. 37(1):299-306. https://doi.org/10.1016/j.proci.2018.05.050

Wani OM, Verpaalen R, Zeng H, Priimagi A, Schenning APHJ. 2019. An Artificial Nocturnal Flower via Humidity-Gated Photoactuation in Liquid Crystal Networks. Advanced Materials. 31(2). https://doi.org/10.1002/adma.201805985

Jaurola M, Hedin A, Tikkanen S, Huhtala K. 2019. A TOpti simulation for finding fuel saving by optimising propulsion control and power management. Journal of Marine Science and Technology (Japan). https://doi.org/10.1007/s00773-019-00651-2

Huttunen-Saarivirta E, Isotahdon E, Metsäjoki J, Salminen T, Ronkainen H, Carpén L. 2019. Behaviour of leaded tin bronze in simulated seawater in the absence and presence of tribological contact with alumina counterbody: Corrosion, wear and tribocorrosion. Tribology International. 129:257-271. https://doi.org/10.1016/j.triboint.2018.08.021

Välikangas T, Hærvig J, Kuuluvainen H, Dal Maso M, Peltonen P, Vuorinen V. 2019. Deposition of dry particles on a fin-and-tube heat exchanger by a coupled soft-sphere DEM and CFD. International Journal of Heat and Mass Transfer. https://doi.org/10.1016/j.ijheatmasstransfer.2019.119046

Houaoui A, Lyyra I, Agniel R, Pauthe E, Massera J, Boissière M. 2019. Dissolution, bioactivity and osteogenic properties of composites based on polymer and silicate or borosilicate bioactive glass. Materials Science and Engineering C. 107. https://doi.org/10.1016/j.msec.2019.110340

Haiko O, Heino V, Porter DA, Uusitalo J, Kömi J. 2019. Effect of microstructure on the abrasive wear resistance of steels with hardness 450 HV. Tribologia. 36(1):54-57. https://doi.org/10.30678/FJT.82443

Suokas E. 2019. Effect of polyolefin molecular structure on product properties in extrusion coating. In 17th Biennial TAPPI European PLACE Conference 2019. TAPPI Press. pp. 89-98.

Ahonen T, Hanski J, Hyvärinen M, Kortelainen H, Uusitalo T, Vainio H, Kunttu S, Koskinen K. 2019. Enablers and barriers of smart data-based asset management services in industrial business networks. In Lecture Notes in Mechanical Engineering. Pleiades Publishing. pp. 51-60. (Lecture Notes in Mechanical Engineering). https://doi.org/10.1007/978-3-319-95711-1_6

Valtonen K, Ratia V, Ramakrishnan KR, Apostol M, Terva J, Kuokkala V-T. 2019. Impact wear and mechanical behavior of steels at subzero temperatures. Tribology International. 129:476-493. https://doi.org/10.1016/j.triboint.2018.08.016

Gao Q, Linjama M, Paloniitty M, Zhu Y. 2019. Investigation on positioning control strategy and switching optimization of an equal coded digital valve system. Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering. https://doi.org/10.1177/0959651819884749

Cheng YC, Lu HC, Lee X, Zeng H, Priimagi A. 2019. Kirigami-Based Light-Induced Shape-Morphing and Locomotion. Advanced Materials. https://doi.org/10.1002/adma.201906233

Lahti J. 2019. Market implementation of active and intelligent packaging-opportunities from a socio-economic perspective. In 17th Biennial TAPPI European PLACE Conference 2019. TAPPI Press. pp. 419-427.

Lahti J. 2019. Nanocellulose and Polylactic Acid Based Multilayer Coatings for Barrier Applications. In 17th Biennial TAPPI European PLACE Conference 2019. TAPPI Press. pp. 446-455.

Alanen J, Ruiz Morales E, Muhammad A, Saarinen H, Minkkinen J. 2019. Remote diagnostics application software for remote handling equipment. Fusion Engineering and Design. https://doi.org/10.1016/j.fusengdes.2019.01.125

Linjamaa A, Lehtovaara A, Kallio M, Léger A. 2019. Running-in effects on friction of journal bearings under slow sliding speeds. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. https://doi.org/10.1177/1350650119864758

Matikainen V, Rubio Peregrina S, Ojala N, Koivuluoto H, Schubert J, Houdková , Vuoristo P. 2019. Slurry and dry particle erosion wear properties of WC-10Co4Cr and Cr3C2-25NiCr hardmetal coatings deposited by HVOF and HVAF spray processes. Tribologia. 36(1-2):58-61. https://doi.org/10.30678/FJT.83590

Lemougna PN, Yliniemi J, Ismailov A, Levänen E, Tanskanen P, Kinnunen P, Roning J, Illikainen M. 2019. Spodumene tailings for porcelain and structural materials: Effect of temperature (1050–1200 °C) on the sintering and properties. Minerals Engineering. https://doi.org/10.1016/j.mineng.2019.105843

Linjama M. 2019. Variable speed digital hydraulic transformer–based servo drive. Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering. https://doi.org/10.1177/0959651819869145

Czaplicki R, Kiviniemi A, Huttunen MJ, Zang X, Stolt T, Vartiainen I, Butet J, Kuittinen M, Martin OJF, Kauranen M. 2018. Less Is More: Enhancement of Second-Harmonic Generation from Metasurfaces by Reduced Nanoparticle Density. Nano Letters. 18(12):7709-7714. https://doi.org/10.1021/acs.nanolett.8b03378

Ottosen NS, Ristinmaa M, Kouhia R. 2018. Enhanced multiaxial fatigue criterion that considers stress gradient effects. International Journal of Fatigue. 116:128-139. https://doi.org/10.1016/j.ijfatigue.2018.05.024

Far MF, Mustafa B, Martin F, Rasilo P, Belahcen A. 2018. Flux-Weakening Control for IPMSM Employing Model Order Reduction. In 2018 23rd International Conference on Electrical Machines, ICEM 2018. IEEE. pp. 1510-1516. https://doi.org/10.1109/ICELMACH.2018.8506693

Far MF, Mukherjee V, Martin F, Rasilo P, Belahcen A. 2018. Model Order Reduction of Bearingless Reluctance Motor Including Eccentricity. In 2018 23rd International Conference on Electrical Machines, ICEM 2018. IEEE. pp. 2243-2249. https://doi.org/10.1109/ICELMACH.2018.8506758

Niemelä-Anttonen H, Koivuluoto H, Tuominen M, Teisala H, Juuti P, Haapanen J, Harra J, Stenroos C, Lahti J, Kuusipalo J, Mäkelä JM, Vuoristo P. 2018. Icephobicity of Slippery Liquid Infused Porous Surfaces under Multiple Freeze–Thaw and Ice Accretion–Detachment Cycles. Advanced Materials Interfaces. 5(20). https://doi.org/10.1002/admi.201800828

Šutka A, Käämbre T, Joost U, Kooser K, Kook M, Duarte RF, Kisand V, Maiorov M, Döbelin N, Smits K. 2018. Solvothermal synthesis derived Co-Ga codoped ZnO diluted magnetic degenerated semiconductor nanocrystals. Journal of Alloys and Compounds. 763:164-172. https://doi.org/10.1016/j.jallcom.2018.05.036

Mäkinen P, Mononen T, Mattila J. 2018. Inertial Sensor-Based State Estimation of Flexible Links Subject to Bending and Torsion. In 2018 14th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications, MESA 2018. IEEE. https://doi.org/10.1109/MESA.2018.8449188

Teke B, Lanz M, Kämäräinen J-K, Hietanen A. 2018. Real-time and Robust Collaborative Robot Motion Control with Microsoft Kinect ® v2. In 2018 14th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications, MESA 2018. IEEE. https://doi.org/10.1109/MESA.2018.8449156

Mahmoodpour M, Lobov A, Lanz M, Mäkelä P, Rundas N. 2018. Role-based visualization of industrial IoT-based systems. In 2018 14th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications, MESA 2018. IEEE. https://doi.org/10.1109/MESA.2018.8449183

Sippola P, Kolehmainen J, Ozel A, Liu X, Saarenrinne P, Sundaresan S. 2018. Experimental and numerical study of wall layer development in a tribocharged fluidized bed. Journal of Fluid Mechanics. 849:860-884. https://doi.org/10.1017/jfm.2018.412

Ghabcheloo R, Siddiqui S. 2018. Complete Odometry Estimation of a Vehicle Using Single Automotive Radar and a Gyroscope. In MED 2018 - 26th Mediterranean Conference on Control and Automation. IEEE. pp. 855-860. https://doi.org/10.1109/MED.2018.8442474

Sajna MS, Perumbilavil S, Prakashan VP, Sanu MS, Joseph C, Biju PR, Unnikrishnan NV. 2018. Enhanced resonant nonlinear absorption and optical limiting in Er3+ ions doped multicomponent tellurite glasses. Materials Research Bulletin. 104:227-235. https://doi.org/10.1016/j.materresbull.2018.04.026

Roldán Del Cerro P, Salminen T, Lastusaari M, Petit L. 2018. Persistent luminescent borosilicate glasses using direct particles doping method. Scripta Materialia. 151:38-41. https://doi.org/10.1016/j.scriptamat.2018.03.034

Nommeots-Nomm A, Boetti NG, Salminen T, Massera J, Hokka M, Petit L. 2018. Luminescence of Er3+ doped oxyfluoride phosphate glasses and glass-ceramics. Journal of Alloys and Compounds. 751:224-230. https://doi.org/10.1016/j.jallcom.2018.04.101

Javaheri V, Nyyssönen T, Grande B, Porter D. 2018. Computational design of a novel medium-carbon, low-alloy steel microalloyed with niobium. Journal of Materials Engineering and Performance. 27(6):2978-2992. https://doi.org/10.1007/s11665-018-3376-9

Oluoti K, Doddapaneni TRKC, Richards T. 2018. Investigating the kinetics and biofuel properties of Alstonia congensis and Ceiba pentandra via torrefaction. Energy. 150:134-141. https://doi.org/10.1016/j.energy.2018.02.086

Koivusalo L, Karvinen J, Sorsa E, Jönkkäri I, Väliaho J, Kallio P, Ilmarinen T, Miettinen S, Skottman H, Kellomäki M. 2018. Hydrazone crosslinked hyaluronan-based hydrogels for therapeutic delivery of adipose stem cells to treat corneal defects. Materials Science and Engineering C. 85:68-78. https://doi.org/10.1016/j.msec.2017.12.013

Mohammed WM, Ramis Ferrer B, Iarovyi S, Negri E, Fumagalli L, Lobov A, Martinez Lastra JL. 2018. Generic platform for manufacturing execution system functions in knowledge-driven manufacturing systems. International Journal of Computer Integrated Manufacturing. 1-13. https://doi.org/10.1080/0951192X.2017.1407874

Krogerus T, Hyvönen M, Huhtala K. 2018. Analysis of common rail pressure signal of dual-fuel large industrial engine for identification of injection duration of pilot diesel injectors. Fuel. 216:1-9. https://doi.org/10.1016/j.fuel.2017.11.152

Välikangas T, Karvinen R. 2018. Conjugated Heat Transfer Simulation of a Fin-and-Tube Heat Exchanger. Heat Transfer Engineering. 39(13-14):1192-1200. https://doi.org/10.1080/01457632.2017.1363628

Soltani A, Curtze S, Lahti J, Järvelä K, Laurikka J, Hokka M, Kuokkala VT. 2018. Digital image correlation study of the deformation and functioning of the human heart during open-heart surgery. In Mechanics of Biological Systems, Materials and other topics in Experimental and Applied Mechanics - Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics. Springer New York LLC. pp. 19-27. (Conference Proceedings of the Society for Experimental Mechanics). https://doi.org/10.1007/978-3-319-63552-1_4

Vazquez Fernandez N, Isakov M, Hokka M, Kuokkala VT. 2018. Effects of adiabatic heating estimated from tensile tests with continuous heating. In Dynamic Behavior of Materials - Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics. Springer New York LLC. pp. 1-7. (Conference Proceedings of the Society for Experimental Mechanics). https://doi.org/10.1007/978-3-319-62956-8_1

Vuorinen E, Heino V, Ojala N, Haiko O, Hedayati A. 2018. Erosive-abrasive wear behavior of carbide-free bainitic and boron steels compared in simulated field conditions. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 232(1):3-13. https://doi.org/10.1177/1350650117739125

Välikangas T, Singh S, Sørensen K, Condra T. 2018. Fin-and-tube heat exchanger enhancement with a combined herringbone and vortex generator design. International Journal of Heat and Mass Transfer. 118:602-616. https://doi.org/10.1016/j.ijheatmasstransfer.2017.11.006

Coatanéa E, Wu D, Tsarkov V, Gary Wang G, Modi S, Jafarian H. 2018. Knowledge-based artificial neural network (KB-ANN) in engineering: Associating functional architecture modeling, dimensional analysis and causal graphs to produce optimized topologies for KB-ANNs. In 38th Computers and Information in Engineering Conference. The American Society of Mechanical Engineers ASME. https://doi.org/10.1115/DETC201885895

Zeng H, Wasylczyk P, Wiersma DS, Priimagi A. 2018. Light Robots: Bridging the Gap between Microrobotics and Photomechanics in Soft Materials. Advanced Materials. 30(24). https://doi.org/10.1002/adma.201703554

Doddapaneni TRKC, Praveenkumar R, Tolvanen H, Rintala J, Konttinen J. 2018. Techno-economic evaluation of integrating torrefaction with anaerobic digestion. Applied Energy. 213:272-284. https://doi.org/10.1016/j.apenergy.2018.01.045

Jaurola M, Hedin A, Tikkanen S, Huhtala K. 2018. TOpti: a flexible framework for optimising energy management for various ship machinery topologies. Journal of Marine Science and Technology (Japan). https://doi.org/10.1007/s00773-018-0617-4

Teisala H, Geyer F, Haapanen J, Juuti P, Mäkelä JM, Vollmer D, Butt HJ. 2018. Ultrafast Processing of Hierarchical Nanotexture for a Transparent Superamphiphobic Coating with Extremely Low Roll-Off Angle and High Impalement Pressure. Advanced Materials. 30(14). https://doi.org/10.1002/adma.201706529

Pyrhönen V-P, Koivisto H, Vilkko M. 2017. A Reduced-Order Two-Degree-of-Freedom Composite Nonlinear Feedback Control for a Rotary DC Servo Motor. In Proceedings of the 56th IEEE Conference on Decision and Control. Melbourne, Australia. pp. 2065-2071. https://doi.org/10.1109/CDC.2017.8263951

Holmberg K, Kivikytö-Reponen P, Härkisaari P, Valtonen K, Erdemir A. 2017. Global energy consumption due to friction and wear in the mining industry. Tribology International. 115:116-139. https://doi.org/10.1016/j.triboint.2017.05.010

Layek RK, Uddin ME, Kim NH, Tak Lau AK, Lee JH. 2017. Noncovalent functionalization of reduced graphene oxide with pluronic F127 and its nanocomposites with gum arabic. Composites Part B : Engineering. 128:155-163. https://doi.org/10.1016/j.compositesb.2017.07.010

Heininen A, Aaltonen J, Koskinen KT. 2017. Simulating the Drag Coefficient of a Spherical Autonomous Underwater Vehicle. Aaltonen J, Virkkunen R, Koskinen KT, Kuivanen R, editors. In Proceedings of the 2nd Annual SMACC Research Seminar 2017. Tampere: Tampere University of Technology. pp. 53-56.

Boardman AD, Alberucci A, Assanto G, Grimalsky VV, Kibler B, McNiff J, Nefedov IS, Rapoport YG, Valagiannopoulos CA. 2017. Waves in hyperbolic and double negative metamaterials including rogues and solitons. Nanotechnology. 28(44). https://doi.org/10.1088/1361-6528/aa6792

Koivumäki J, Mattila J. 2017. Adaptive and nonlinear control of discharge pressure for variable displacement axial piston pumps. Journal of Dynamic Systems, Measurement and Control: Transactions of the ASME. 139(10). https://doi.org/10.1115/1.4036537

Itävuo P, Hulthén E, Vilkko M. 2017. Feed-hopper level estimation and control in cone crushers. Minerals Engineering. 110:82-95. https://doi.org/10.1016/j.mineng.2017.04.010

Palagi S, Mark AG, Melde K, Qiu T, Zeng H, Parmeggiani C, Martella D, Wiersma DS, Fischer P. 2017. Locomotion of light-driven soft microrobots through a hydrogel via local melting. In International Conference on Manipulation, Automation and Robotics at Small Scales, MARSS 2017 - Proceedings. IEEE. https://doi.org/10.1109/MARSS.2017.8001916

Kreutzer J, Viehrig M, Maki A-J, Kallio P, Rahikainen R, Hytönen V. 2017. Pneumatically actuated elastomeric device for simultaneous mechanobiological studies & live-cell fluorescent microscopy. In International Conference on Manipulation, Automation and Robotics at Small Scales, MARSS 2017 - Proceedings. IEEE. https://doi.org/10.1109/MARSS.2017.8001929

Laurila MM, Khorramdel B, Dastpak A, Mäntysalo M. 2017. Statistical analysis of E-jet print parameter effects on Ag-nanoparticle ink droplet size. Journal of Micromechanics and Microengineering. 27(9). https://doi.org/10.1088/1361-6439/aa7a71

Antin KN, Pärnänen T. 2017. Democratizing composites manufacturing -inexpensive tooling empowers new players. SAMPE Journal. 53(4):6-10.

Kivelä T, Mattila J, Puura J, Launis S. 2017. Redundant robotic manipulator path planning for real-time obstacle and self-collision avoidance. Ferraresi C, Quaglia G, editors. In Advances in Service and Industrial Robotics: Proceedings of the 26th International Conference on Robotics in Alpe-Adria-Danube Region, RAAD 2017. Springer International Publishing. pp. 208-216. (Mechanisms and Machine Science). https://doi.org/10.1007/978-3-319-61276-8_24

Stoykova E, Berberova N, Kim Y, Nazarova D, Ivanov B, Gotchev A, Hong J, Kang H. 2017. Dynamic speckle analysis with smoothed intensity-based activity maps. Optics and Lasers in Engineering. 93:55-65. https://doi.org/10.1016/j.optlaseng.2017.01.012

Laakkonen P, Quadrat A. 2017. A fractional representation approach to the robust regulation problem for SISO systems. Systems and Control Letters. 103:32-37. https://doi.org/10.1016/j.sysconle.2017.02.006

Lanz M, Tuokko R. 2017. Concepts, methods and tools for individualized production. PRODUCTION ENGINEERING. 11(2):205-212. https://doi.org/10.1007/s11740-017-0728-5

Sekki T, Airaksinen M, Saari A. 2017. Effect of energy measures on the values of energy efficiency indicators in Finnish daycare and school buildings. Energy and Buildings. 139:124-132. https://doi.org/10.1016/j.enbuild.2017.01.005

Mashayekhi M, Winchester L, Laurila M-M, Mäntysalo M, Ogier S, Terés L, Carrabina J. 2017. Chip-by-chip configurable interconnection using digital printing techniques. Journal of Micromechanics and Microengineering. 27(4). https://doi.org/10.1088/1361-6439/aa5ef3

Seidt JD, Kuokkala V-T, Smith JL, Gilat A. 2017. Synchronous Full-Field Strain and Temperature Measurement in Tensile Tests at Low, Intermediate and High Strain Rates. Experimental Mechanics. 57(2):219–229. https://doi.org/10.1007/s11340-016-0237-z

Suokas E. 2017. Effect of air gap on the adhesion of PET layer on cardboard substrate in extrusion coating. In 16th TAPPI European PLACE Conference 2017. TAPPI Press. pp. 529-544.

Lahti J, Kamppuri T, Kuusipalo J. 2017. Novel bio-based materials for active and intelligent packaging. In 16th TAPPI European PLACE Conference 2017. TAPPI Press.

Lahti J, Kuusipalo J, Auvinen S. 2017. Novel equipment to simulate hot air heat sealability of packaging materials. In 16th TAPPI European PLACE Conference 2017. TAPPI Press. pp. 237-248.

Kuusipalo J, Lahti J. 2017. Tampere University of Technology, laboratory of materials science, paper converting and packaging technology Tampere, Finland. In 16th TAPPI European PLACE Conference 2017: Basel; Switzerland; 22 May 2017 through 24 May 2017. TAPPI Press.

Isotahdon E, Huttunen-Saarivirta E, Kuokkala V. 2017. Characterization of the microstructure and corrosion performance of Ce-alloyed Nd-Fe-B magnets. Journal of Alloys and Compounds. 692:190-197. https://doi.org/10.1016/j.jallcom.2016.09.058

Huova M, Aalto A, Linjama M, Huhtala K, Lantela T, Pietola M. 2017. Digital hydraulic multi-pressure actuator – the concept, simulation study and first experimental results. International Journal of Fluid Power. 18(3):141-152. https://doi.org/10.1080/14399776.2017.1302775

Wu D, Coatanea E, Wang GG. 2017. Dimension reduction and decomposition using causal graph and qualitative analysis for aircraft concept design optimization. In 43rd Design Automation Conference. The American Society of Mechanical Engineers ASME. https://doi.org/10.1115/DETC201767601

Wang X, Fagerlund S, Massera J, Södergård B, Hupa L. 2017. Do properties of bioactive glasses exhibit mixed alkali behavior?. Journal of Materials Science. 52(15):8986–8997. https://doi.org/10.1007/s10853-017-0915-y

Haiko O, Miettunen I, Porter D, Ojala N, Ratia V, Heino V, Kemppainen A. 2017. Effect of finish rolling and quench stop temperatures on impact-abrasive wear resistance of 0.35 % carbon direct-quenched steel. Tribologia. 35(1-2):5-21.

Mikkonen A, Karvinen R. 2017. Heat Transfer of Impinging Jet: Effect of Compressibility and Turbulent Kinetic Energy Production. In IX International Conference on Computational Heat and Mass Transfer (ICCHMT 2016) .

Lindroos M, Laukkanen A, Cailletaud G, Kuokkala V-T. 2017. On the effect of deformation twinning and microstructure to strain hardening of high manganese austenitic steel 3D microstructure aggregates at large strains. International Journal of Solids and Structures. 125:68-76. https://doi.org/10.1016/j.ijsolstr.2017.07.015

Taddeo R, Prajapati S, Lepistö R. 2017. Optimizing ammonium adsorption on natural zeolite for wastewaters with high loads of ammonium and solids. Journal of Porous Materials. 24(6):1545–1554. https://doi.org/10.1007/s10934-017-0394-1

Koivuluoto H, Milanti A, Bolelli G, Latokartano J, Marra F, Pulci G, Vihinen J, Lusvarghi L, Vuoristo P. 2017. Structures and properties of laser-assisted cold-sprayed aluminum coatings. In THERMEC 2016. Trans Tech Publications Ltd. pp. 984-989. (Materials Science Forum). https://doi.org/10.4028/www.scientific.net/MSF.879.984

Mishra A, Petit L, Pihl M, Andersson M, Salminen T, Rocherullé J, Massera J. 2017. Thermal, structural and in vitro dissolution of antimicrobial copper-doped and slow resorbable iron-doped phosphate glasses. Journal of Materials Science. 52(15):8957–8972. https://doi.org/10.1007/s10853-017-0805-3

Hintikka J, Lehtovaara A, Mäntylä A. 2017. Third Particle Ejection Effects on Wear with Quenched and Tempered Steel Fretting Contact. TRIBOLOGY TRANSACTIONS. 60(1):70-78. https://doi.org/10.1080/10402004.2016.1146813

Barreca D, Carraro G, Gasparotto A, Maccato C, Altantzis T, Sada C, Kaunisto K, Ruoko T-P, Bals S. 2017. Vapor Phase Fabrication of Nanoheterostructures Based on ZnO for Photoelectrochemical Water Splitting. Advanced Materials Interfaces. 4(18). https://doi.org/10.1002/admi.201700161

Carfora D, Gironimo GD, Esposito G, Huhtala K, Määttä T, Mäkinen H, Miccichè G, Mozzillo R. 2016. Multicriteria selection in concept design of a divertor remote maintenance port in the EU DEMO reactor using an AHP participative approach. Fusion Engineering and Design. 112:324-331. https://doi.org/10.1016/j.fusengdes.2016.08.023

Juoksukangas J, Lehtovaara A, Mäntylä A. 2016. Experimental and numerical investigation of fretting fatigue behavior in bolted joints. Tribology International. 103:440-448. https://doi.org/10.1016/j.triboint.2016.07.021

Järvinen H, Isakov M, Nyyssönen T, Järvenpää M, Peura P. 2016. The effect of initial microstructure on the final properties of press hardened 22MnB5 steels. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing. 676:109-120. https://doi.org/10.1016/j.msea.2016.08.096

Juoksukangas J, Lehtovaara A, Mäntylä A. 2016. A comparison of relative displacement fields between numerical predictions and experimental results in fretting contact. Proceedings of the institution of Mechanical Engineers Part J: Journal of Engineering Tribology. 230(10):1273-1287. https://doi.org/10.1177/1350650116633573

Sekki T, Andelin M, Airaksinen M, Saari A. 2016. Consideration of energy consumption, energy costs, and space occupancy in Finnish daycare centres and school buildings. Energy and Buildings. 129:199-206. https://doi.org/10.1016/j.enbuild.2016.08.015

Mikkonen A, Karvinen R. 2016. Solar Panel Breakage During Heavy Rain Caused by Thermal Stress. In Engineered Transparency 2016: Glass in Architechture and Structural Engineering. Wiley.

Lindgren M, Santa-aho S, Vippola M. 2016. Barkhausen noise response of three different welded duplex stainless steels. Insight. 58(9):480-486. https://doi.org/10.1784/insi.2016.58.9.480

Ellman A, Wendrich R, Tiainen T. 2016. Framework and feasibility study for pairwise comparison tool. In Proceedings of the ASME 2016 Computers and Information in Engineering Conference IDETC/CIE 2016. Charlotte, North Carolina: ASME. https://doi.org/10.1115/DETC2016-59886

Luna E, Wu M, Hanke M, Puustinen J, Guina M, Trampert A. 2016. Spontaneous formation of three-dimensionally ordered Bi-rich nanostructures within GaAs1-xBix/GaAs quantum wells. Nanotechnology. 27(32). https://doi.org/10.1088/0957-4484/27/32/325603

Rodríguez Ripoll M, Ojala N, Katsich C, Totolin V, Tomastik C, Hradil K. 2016. The role of niobium in improving toughness and corrosion resistance of high speed steel laser hardfacings. Materials and Design. 99:509-520. https://doi.org/10.1016/j.matdes.2016.03.081

Philippi PC, Siebert DN, Hegele LA, Mattila KK. 2016. High-order lattice-Boltzmann. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 38(5):1401-1419. https://doi.org/10.1007/s40430-015-0441-2

Kuzmin M, Laukkanen P, Mäkelä J, Yasir M, Tuominen M, Dahl J, Punkkinen MPJ, Kokko K, Hedman HP, Moon J, Punkkinen R, Lastusaari M, Polojärvi V, Korpijärvi V-M, Guina M. 2016. Toward the Atomically Abrupt Interfaces of SiOx/Semiconductor Junctions. Advanced Materials Interfaces. 3(11). https://doi.org/10.1002/admi.201500510

Janka L, Norpoth J, Eicher S, Rodríguez Ripoll M, Vuoristo P. 2016. Improving the toughness of thermally sprayed Cr 3C 2-NiCr hardmetal coatings by laser post-treatment. Materials and Design. 98:135-142. https://doi.org/10.1016/j.matdes.2016.03.007

Hokka M, Black J, Tkalich D, Fourmeau M, Kane A, Hoang NH, Li CC, Chen WW, Kuokkala V-T. 2016. Effects of strain rate and confining pressure on the compressive behavior of Kuru granite. International Journal of Impact Engineering. 91:183-193. https://doi.org/10.1016/j.ijimpeng.2016.01.010

Kanerva U, Karhu M, Lagerbom J, Kronlöf A, Honkanen M, Turunen E, Laitinen T. 2016. Chemical synthesis of WC-Co from water-soluble precursors: The effect of carbon and cobalt additions to WC synthesis. International Journal of Refractory Metals and Hard Materials. 56:69-75. https://doi.org/10.1016/j.ijrmhm.2015.11.014

Korkiakoski S, Brøndsted P, Sarlin E, Saarela O. 2016. Influence of specimen type and reinforcement on measured tension-tension fatigue life of unidirectional GFRP laminates. International Journal of Fatigue. 85:114-129. https://doi.org/10.1016/j.ijfatigue.2015.12.008

Andersson P, Kilpi L, Holmberg K, Vaajoki A, Oksanen V. 2016. Static friction measurements on steel against uncoated and coated cast iron. Tribologia. 34(1-2):5-40.

Paris H, Mokhtarian H, Coatanéa E, Museau M, Ituarte IF. 2016. Comparative environmental impacts of additive and subtractive manufacturing technologies. CIRP Annals: Manufacturing Technology. 65(1):29-32. https://doi.org/10.1016/j.cirp.2016.04.036

Hartikainen J, Kolari K, Kouhia R. 2016. Development and numerical implementation of an anisotropic continuum damage model for concrete. In Advances in Fracture and Damage Mechanics XV. Trans Tech Publications Ltd. pp. 115-118. (Key Engineering Materials). https://doi.org/10.4028/www.scientific.net/KEM.713.115

Hokka M, Mirow N, Nagel H, Vogt S, Kuokkala V-T. 2016. DIC measurements of the human heart during cardiopulmonary bypass surgery. In Conference Proceedings of the Society for Experimental Mechanics Series. Springer New York LLC. pp. 51-59. https://doi.org/10.1007/978-3-319-21455-9_6

Hilliaho K, Köliö A, Pakkala T, Lahdensivu J, Vinha J. 2016. Effects of added glazing on Balcony indoor temperatures: Field measurements. Energy and Buildings. 128:458-472. https://doi.org/10.1016/j.enbuild.2016.07.025

Mäkinen J, Fränti K, Korhonen M, Fillion J, Heinisuo M. 2016. End-plate connections in Bi-axial bending - Measurements. Mazzolani FM, Squillace A, Faggiano B, Bellucci F, editors. In 13th International Aluminium Conference, Sustainability, Durability and Structural Advantages, : INALCO 2016; Naples; Italy; 21 September 2016 through 23 September 2016. Trans Tech Publications Ltd. pp. 275-280. (Key Engineering Materials). https://doi.org/10.4028/www.scientific.net/KEM.710.275

Lahti J. 2016. Nanoscale barrier coating on BOPP packaging film by ALD. In TAPPI PLACE Conference 2016: Exploring New Frontiers. TAPPI Press. pp. 493-505.

Hintikka J, Lehtovaara A, Mäntylä A. 2016. Normal displacements in non-Coulomb friction conditions during fretting. Tribology International. 94:633-639. https://doi.org/10.1016/j.triboint.2015.10.029

Bolelli G, Milanti A, Lusvarghi L, Trombi L, Koivuluoto H, Vuoristo P. 2016. Wear and impact behaviour of High Velocity Air-Fuel sprayed Fe-Cr-Ni-B-C alloy coatings. Tribology International. 95:372-390. https://doi.org/10.1016/j.triboint.2015.11.036

Ihalainen TO, Aires L, Herzog FA, Schwartlander R, Moeller J, Vogel V. 2015. Differential basal-to-apical accessibility of lamin A/C epitopes in the nuclear lamina regulated by changes in cytoskeletal tension. Nature Materials. 14(12):1252-1261. https://doi.org/10.1038/nmat4389

Fedorik F, Malaska M, Hannila R, Haapala A. 2015. Improving the thermal performance of concrete-sandwich envelopes in relation to the moisture behaviour of building structures in boreal conditions. Energy and Buildings. 107:226-233. https://doi.org/10.1016/j.enbuild.2015.08.020

Bourhis K, Massera J, Petit L, Koponen J, Fargues A, Cardinal T, Hupa L, Hupa M, Dussauze M, Rodriguez V, Ferraris M. 2015. Erbium-doped borosilicate glasses containing various amounts of P2O5 and Al2O3: Influence of the silica content on the structure and thermal, physical, optical and luminescence properties. Materials Research Bulletin. 70:47-54. https://doi.org/10.1016/j.materresbull.2015.04.017

Sekki T, Airaksinen M, Saari A. 2015. Impact of building usage and occupancy on energy consumption in Finnish daycare and school buildings. Energy and Buildings. 105:247-257. https://doi.org/10.1016/j.enbuild.2015.07.036

Gashti EHN, Malaska M, Kujala K. 2015. Analysis of thermo-active pile structures and their performance under groundwater flow conditions. Energy and Buildings. 105:1-8. https://doi.org/10.1016/j.enbuild.2015.07.026

Syrjärinne P, Nummenmaa J, Thanisch P, Kerminen R, Hakulinen E. 2015. Analysing traffic fluency from bus data. IET Intelligent Transport Systems. 9(6):566-572. https://doi.org/10.1049/iet-its.2014.0192

Haaparanta A-M, Uppstu P, Hannula M, Ellä V, Rosling A, Kellomäki M. 2015. Improved dimensional stability with bioactive glass fibre skeleton in poly(lactide-co-glycolide) porous scaffolds for tissue engineering. Materials Science and Engineering C: Materials for Biological Applications. 56:457-466. https://doi.org/10.1016/j.msec.2015.07.013

Hakkarainen TV, Schramm A, Mäkelä J, Laukkanen P, Guina M. 2015. Lithography-free oxide patterns as templates for self-catalyzed growth of highly uniform GaAs nanowires on Si(111). Nanotechnology. 26(27). https://doi.org/10.1088/0957-4484/26/27/275301

Carfora D, Di Gironimo G, Järvenpää J, Huhtala K, Määttä T, Siuko M. 2015. Divertor remote handling for DEMO: Concept design and preliminary FMECA studies. Fusion Engineering and Design. 98-99:1437-1441. https://doi.org/10.1016/j.fusengdes.2015.06.056

Hintikka J, Lehtovaara A, Mäntylä A. 2015. Fretting-induced friction and wear in large flat-on-flat contact with quenched and tempered steel. Tribology International. 92:191-202. https://doi.org/10.1016/j.triboint.2015.06.008

Mendes MR, Subramaniyam NP, Wendel-Mitoraj K. 2015. Evaluating the electrode measurement sensitivity of subdermal electroencephalography electrodes. In International IEEE/EMBS Conference on Neural Engineering, NER. IEEE COMPUTER SOCIETY PRESS. pp. 1092-1095. https://doi.org/10.1109/NER.2015.7146818

Tanskanen JMA, Kapucu FE, Hyttinen JAK. 2015. On the threshold based neuronal spike detection, and an objective criterion for setting the threshold. In International IEEE/EMBS Conference on Neural Engineering, NER. IEEE COMPUTER SOCIETY PRESS. pp. 1016-1019. https://doi.org/10.1109/NER.2015.7146799

Subramaniyam NP, Hyttinen J, Hatsopoulos NG, Takahashi K. 2015. Recurrence network analysis of wide band oscillations of local field potentials from the primary motor cortex reveals rich dynamics. In International IEEE/EMBS Conference on Neural Engineering, NER. IEEE COMPUTER SOCIETY PRESS. pp. 960-963. https://doi.org/10.1109/NER.2015.7146785

Le T, Lin Z, Wong CP, Tentzeris MM. 2015. Smart Skins: Could they be the ultimate sensing tool? Today\uFFFDs industry and personal medical care both strongly demand accurate, reliable, robust, lo. IEEE Nanotechnology Magazine. 9(2):4-10. https://doi.org/10.1109/MNANO.2015.2410474

Wu H, Sariola V, Zhu C, Zhao J, Sitti M, Bettinger CJ. 2015. Transfer printing of metallic microstructures on adhesion-promoting hydrogel substrates. Advanced Materials. 27(22):3398-3404. https://doi.org/10.1002/adma.201500954

Isotahdon E, Huttunen-Saarivirta E, Heinonen S, Kuokkala VT, Paju M. 2015. Corrosion mechanisms of sintered Nd-Fe-B magnets in the presence of water as vapour, pressurised vapour and liquid. Journal of Alloys and Compounds. 626:349-359. https://doi.org/10.1016/j.jallcom.2014.12.048

Bautista G, Mäkitalo J, Chen Y, Dhaka V, Grasso M, Karvonen L, Jiang H, Huttunen MJ, Huhtio T, Lipsanen H, Kauranen M. 2015. Second-harmonic generation imaging of semiconductor nanowires with focused vector beams. Nano Letters. 15(3):1564-1569. https://doi.org/10.1021/nl503984b

Ratia V, Rojacz H, Terva J, Valtonen K, Badisch E, Kuokkala VT. 2015. Effect of Multiple Impacts on the Deformation of Wear-Resistant Steels. Tribology Letters. 57(2). https://doi.org/10.1007/s11249-014-0460-7

Czaplicki R, Mäkitalo J, Siikanen R, Husu H, Lehtolahti J, Kuittinen M, Kauranen M. 2015. Second-Harmonic Generation from Metal Nanoparticles: Resonance Enhancement versus Particle Geometry. Nano Letters. 15(1):530-534. https://doi.org/10.1021/nl503901e

Mettänen M, Hirn U. 2015. A comparison of five optical surface topography measurement methods. TAPPI Journal. 14(1):27-38.

Sekki T, Airaksinen M, Saari A. 2015. Measured energy consumption of educational buildings in a Finnish city. Energy and Buildings. 87:105-115. https://doi.org/10.1016/j.enbuild.2014.11.032

Martinez F, Neculqueo G, Vasquez SO, Lemmetyinen H, Efimov A, Vivo P. 2015. Branched thiophene oligomer/polymer bulk heterojunction organic solar cell. In Materials Research Society Symposium Proceedings. MATERIALS RESEARCH SOCIETY. pp. 19-25. https://doi.org/10.1557/opl.2015.529

Palazzo G, De Tullio D, Magliulo M, Mallardi A, Intranuovo F, Mulla MY, Favia P, Vikholm-Lundin I, Torsi L. 2015. Detection beyond Debye's length with an electrolyte-gated organic field-effect transistor. Advanced Materials. 27(5):911-916. https://doi.org/10.1002/adma.201403541

Lindroos M, Apostol M, Kuokkala VT, Laukkanen A, Valtonen K, Holmberg K, Oja O. 2015. Experimental study on the behavior of wear resistant steels under high velocity single particle impacts. International Journal of Impact Engineering. 78:114-127. https://doi.org/10.1016/j.ijimpeng.2014.12.002

Barreca D, Carraro G, Gasparotto A, Maccato C, Warwick MEA, Kaunisto K, Sada C, Turner S, Gönüllü Y, Ruoko T-P, Borgese L, Bontempi E, Van Tendeloo G, Lemmetyinen H, Mathur S. 2015. Fe2O3-TiO2 Nano-heterostructure Photoanodes for Highly Efficient Solar Water Oxidation. Advanced Materials Interfaces. 2(17). https://doi.org/10.1002/admi.201500313

Hokka M, Östman K, Rämö J, Kuokkala VT. 2015. High Temperature Tension HSB Device Based on Direct Electrical Heating. Song B, Casem D, Kimberley J, editors. In Dynamic Behavior of Materials, Volume 1: Proceedings of the 2014 Annual Conference on Experimental and Applied Mechanics. Springer. pp. 227-233. (Conference Proceedings of the Society for Experimental Mechanics Series). https://doi.org/10.1007/978-3-319-06995-1_34

Pylkkänen K, Nurmikolu A, Guthrie WS, Argyle HM. 2015. Measurements and Modeling of Frost Depth in Railway Tracks. In Proceedings of the International Conference on Cold Regions Engineering: 16th International Conference on Cold Regions Engineering 2015. American Society of Civil Engineers ASCE. pp. 123-134. https://doi.org/10.1061/9780784479315.012

Mäkelä JM, Haapanen J, Aromaa M, Teisala H, Tuominen M, Stepien M, Saarinen JJ, Toivakka M, Kuusipalo J. 2015. Roll-to-roll coating by liquid flame spray nanoparticle deposition. In Materials Research Society Symposium Proceedings. MATERIALS RESEARCH SOCIETY. pp. 37-42. https://doi.org/10.1557/opl.2015.530

Björling M, Miettinen J, Marklund P, Lehtovaara A, Larsson R. 2015. The correlation between gear contact friction and ball on disc friction measurements. Tribology International. 83:114-119. https://doi.org/10.1016/j.triboint.2014.11.007

Lindroos M, Apostol M, Heino V, Valtonen K, Laukkanen A, Holmberg K, Kuokkala VT. 2015. The deformation, strain hardening, and wear behavior of chromium-alloyed hadfield steel in abrasive and impact conditions. Tribology Letters. 57(3). https://doi.org/10.1007/s11249-015-0477-6

Seppälä J, Salmenperä M. 2015. Towards dependable automation. In Cyber Security: Analytics, Technology and Automation: Part IV. Springer International Publishing. pp. 229-249. (Intelligent Systems, Control and Automation: Science and Engineering). https://doi.org/10.1007/978-3-319-18302-2_15

Sariola V, Sitti M. 2014. Mechanically Switchable Elastomeric Microfibrillar Adhesive Surfaces for Transfer Printing. Advanced Materials Interfaces. 1(4). https://doi.org/10.1002/admi.201300159

Borah D, Rasappa S, Senthamaraikannan R, Holmes JD, Morris MA. 2014. Graphoepitaxial Directed Self-Assembly of Polystyrene-Block-Polydimethylsiloxane Block Copolymer on Substrates Functionalized with Hexamethyldisilazane to Fabricate Nanoscale Silicon Patterns. Advanced Materials Interfaces. 1(3). https://doi.org/10.1002/admi.201300102

Teisala H, Tuominen M, Kuusipalo J. 2014. Superhydrophobic Coatings on Cellulose-Based Materials: Fabrication, Properties, and Applications. Advanced Materials Interfaces. 1(1):1-20. https://doi.org/10.1002/admi.201300026

Saintsing CD, Cook BS, Tentzeris MM. 2014. An origami inspired reconfigurable spiral antenna. In 38th Mechanisms and Robotics Conference. The American Society of Mechanical Engineers ASME. https://doi.org/10.1115/DETC201435353

Coatanéa E, Nonsiri S, Christophe F, Mokammel F. 2014. Graph based representation and analyses for conceptual stages. In 34th Computers and Information in Engineering Conference. The American Society of Mechanical Engineers ASME. https://doi.org/10.1115/DETC201435652

Tzounis L, Debnath S, Rooj S, Fischer D, Mäder E, Das A, Stamm M, Heinrich G. 2014. High performance natural rubber composites with a hierarchical reinforcement structure of carbon nanotube modified natural fibers. Materials and Design. 58:1-11. https://doi.org/10.1016/j.matdes.2014.01.071

Lahti J, Johansson P, Lahtinen K, Cameron DC, Seppänen T. 2014. Improving the effect of nanoscale barrier coating on BOPP film properties: Influence of substrate contamination, web handling and pretreatments. In TAPPI PLACE Conference 2014. TAPPI Press. pp. 1039-1061.

Gordon TR, Paik T, Klein DR, Naik GV, Caglayan H, Boltasseva A, Murray CB. 2013. Shape-dependent plasmonic response and directed self-assembly in a new semiconductor building block, indium-doped cadmium oxide (ICO). Nano Letters. 13(6):2857-2863. https://doi.org/10.1021/nl4012003

Colace L, Santoni F, Assanto G. 2013. A near-infrared optoelectronic approach to detection of road conditions. Optics and Lasers in Engineering. 51(5):633-636. https://doi.org/10.1016/j.optlaseng.2013.01.003

Liimatainen V, Sariola V, Zhou Q. 2013. Controlling liquid spreading using microfabricated undercut edges. Advanced Materials. 25(16):2275-2278. https://doi.org/10.1002/adma.201204696

Magliulo M, Mallardi A, Mulla MY, Cotrone S, Pistillo BR, Favia P, Vikholm-Lundin I, Palazzo G, Torsi L. 2013. Electrolyte-gated organic field-effect transistor sensors based on supported biotinylated phospholipid bilayer. Advanced Materials. 25(14):2090-2094. https://doi.org/10.1002/adma.201203587

Cochrane C, Mordon SR, Lesage JC, Koncar V. 2013. New design of textile light diffusers for photodynamic therapy. Materials Science and Engineering C: Materials for Biological Applications. 33(3):1170-1175. https://doi.org/10.1016/j.msec.2012.12.007

Rasappa S, Borah D, Faulkner CC, Lutz T, Shaw MT, Holmes JD, Morris MA. 2013. Fabrication of a sub-10 nm silicon nanowire based ethanol sensor using block copolymer lithography. Nanotechnology. 24(6). https://doi.org/10.1088/0957-4484/24/6/065503

Fafarman AT, Hong SH, Caglayan H, Ye X, Diroll BT, Paik T, Engheta N, Murray CB, Kagan CR. 2013. Chemically tailored dielectric-to-metal transition for the design of metamaterials from nanoimprinted colloidal nanocrystals. Nano Letters. 13(2):350-357. https://doi.org/10.1021/nl303161d

Debnath SC, Das A, Basu D, Heinrich G. 2013. Naturally occurring amino acids: A suitable substitute of N-N/-di-phenyl guanidine (DPG) in silica tyre formulation?. KGK: KAUTSCHUK GUMMI KUNSTSTOFFE. 66(1-2):25-31.

Lahtinen K, Lahti J, Johansson P, Seppänen T, Cameron DC. 2013. Improving the effect of a nanoscale barrier coating on BOPP film properties by surface pretreatments. In 14th European PLACE Conference 2013. TAPPI Press. pp. 469-493.

Ronkainen H, Kanerva U, Varis T, Ruusuvuori K, Turunen E, Peräntie J, Putaala J, Juuti J, Jantunen H. 2013. Materials for electronics by thermal spraying. In Physical and Numerical Simulation of Materials Processing VII. pp. 451-456. (Materials Science Forum). https://doi.org/10.4028/www.scientific.net/MSF.762.451

Alatalo M, Pitkänen H, Ropo M, Kokko K, Vitos L. 2013. Modeling of steels and steel surfaces using quantum mechanical first principles methods. In Physical and Numerical Simulation of Materials Processing VII. pp. 445-450. (Materials Science Forum). https://doi.org/10.4028/www.scientific.net/MSF.762.445

Mokammel F, Coatanea E, Christophe F, Ba Khouya M, Medyna G. 2013. Towards an approach for evaluating the quality of requirements. In 33rd Computers and Information in Engineering Conference. American Society of Mechanical Engineers. https://doi.org/10.1115/DETC2013-13708

Wang H, Feng Y, Fang Z, Yuan W, Khan M. 2012. Co-electrospun blends of PU and PEG as potential biocompatible scaffolds for small-diameter vascular tissue engineering. Materials Science and Engineering C: Materials for Biological Applications. 32(8):2306-2315. https://doi.org/10.1016/j.msec.2012.07.001

Kouhia R, Tůma M, Mäkinen J, Fedoroff A, Marjamäki H. 2012. Implementation of a direct procedure for critical point computations using preconditioned iterative solvers. Computers & Structures. 108-109:110-117. https://doi.org/10.1016/j.compstruc.2012.02.009

Subramaniam K, Das A, Heinrich G. 2012. Highly conducting polychloroprene composites based on multi-walled carbon nanotubes and 1-butyl 3-methyl imidazolium bis(trifluoromethylsulphonyl)imide. KGK: KAUTSCHUK GUMMI KUNSTSTOFFE. 65(7-8):44-46.

Ahmed R, Priimagi A, Faul CFJ, Manners I. 2012. Redox-active, organometallic surface-relief gratings from azobenzene-containing polyferrocenylsilane block copolymers. Advanced Materials. 24(7):926-931. https://doi.org/10.1002/adma.201103793

Caraffi C, Vojir T, Trefný J, Šochman J, Matas J. 2012. A system for real-time detection and tracking of vehicles from a single car-mounted camera. In 2012 15th International IEEE Conference on Intelligent Transportation Systems, ITSC 2012. pp. 975-982. https://doi.org/10.1109/ITSC.2012.6338748

Yang D, Feng Y, Behl M, Lendlein A, Zhao H, Khan M, Guo J. 2012. Biomimetic hemo-compatible surfaces of polyurethane by grafting copolymer brushes of poly(ethylene glycol) and poly(phosphorylcholine methacrylate). In Multifunctional Polymer-Based Materials. pp. 171-176. https://doi.org/10.1557/opl.2012.702

Borah D, Rasappa S, Kosmala B, Holmes JD, Morris MA. 2012. Block copolymer self-assembly on ethylene glycol (EG) self-assembled monolayer (SAM) for nanofabrication. In Nanoscale Materials Modification by Photon, Ion, and Electron Beams. pp. 8-13. https://doi.org/10.1557/opl.2012.1224

Malas A, Das CK, Das A, Heinrich G. 2012. Development of expanded graphite filled natural rubber vulcanizates in presence and absence of carbon black: Mechanical, thermal and morphological properties. Materials and Design. 39:410-417. https://doi.org/10.1016/j.matdes.2012.03.007

Rasilo P, Belahcen A, Arkkio A. 2012. Effect of rotor pole-shoe construction on losses of inverter-fed synchronous motors. In Proceedings - 2012 20th International Conference on Electrical Machines, ICEM 2012. pp. 1282-1286. https://doi.org/10.1109/ICElMach.2012.6350042

Kurnitski J, Saari A, Kalamees T, Vuolle M, Niemelä J, Tark T. 2011. Cost optimal and nearly zero (nZEB) energy performance calculations for residential buildings with REHVA definition for nZEB national implementation. Energy and Buildings. 43(11):3279-3288. https://doi.org/10.1016/j.enbuild.2011.08.033

Kravchenko A, Shevchenko A, Ovchinnikov V, Priimagi A, Kaivola M. 2011. Optical interference lithography using azobenzene-functionalized polymers for micro-and nanopatterning of silicon. Advanced Materials. 23(36):4174-4177. https://doi.org/10.1002/adma.201101888

Chang B, Routa I, Sariola V, Zhou Q. 2011. Self-alignment of RFID dies on four-pad patterns with water droplet for sparse self-assembly. Journal of Micromechanics and Microengineering. 21(9). https://doi.org/10.1088/0960-1317/21/9/095024

Linko V, Leppiniemi J, Paasonen ST, Hytönen VP, Jussi Toppari J. 2011. Defined-size DNA triple crossover construct for molecular electronics: Modification, positioning and conductance properties. Nanotechnology. 22(27). https://doi.org/10.1088/0957-4484/22/27/275610

Tuurna S, Varis T, Penttilä K, Ruusuvuori K, Holmström S, Yli-Olli S. 2011. Optimised selection of new protective coatings for biofuel boiler applications. Materials and Corrosion-Werkstoffe und Korrosion. 62(7):642-649. https://doi.org/10.1002/maco.201005898

Lisjak D, Lintunen P, Hujanen A, Varis T, Bolelli G, Lusvarghi L, Jagodič M, Drofenik M. 2011. Hexaferrite/polyethylene Composite coatings prepared with flame spraying. Materials Letters. 65(3):534-536. https://doi.org/10.1016/j.matlet.2010.10.076

Chang B, Sariola V, Jääskeläinen M, Zhou Q. 2011. Self-alignment in the stacking of microchips with mist-induced water droplets. Journal of Micromechanics and Microengineering. 21(1). https://doi.org/10.1088/0960-1317/21/1/015016

Vähä-Nissi M, Hirvikorpi T, Sievänen J, Salo E, Harlin A, Johansson P, Kuusipalo J. 2011. Effect of pre-treatments on barrier properties of layers applied by atomic layer deposition onto polymer-coated substrates. In 13th European PLACE Conference 2011. pp. 447.

Medyna G, Coatanea E, Millet D. 2011. Evaluation of parts of a boat cabin based on exergy - Focusing on environmental and economic assessments. In ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011. PARTS A AND B ed. AMER SOC MECHANICAL ENGINEERS. pp. 1083-1092.

Teisala H, Tuominen M, Aromaa M, Mäkelä JM, Stepien M, Saarinen JJ, Toivakka M, Kuusipalo J. 2011. Nanoparticle deposition on packaging materials by the liquid flame spray. In 13th European PLACE Conference 2011.

Christophe F, Ritola T, Coatanéa E, Bernard A. 2011. Semantic analysis of function-solution duality. In ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011. pp. 611-619. https://doi.org/10.1115/IMECE2011-63546

Coatanéa E, Ritola T, Tumer IY, Jensen D. 2010. A framework for building behavioral models for design-stage failure identification using dimensional analysis. In Proceedings of the ASME Design Engineering Technical Conference. AMER SOC MECHANICAL ENGINEERS. pp. 591-601. https://doi.org/10.1115/DETC2010-28864

Lahti J, Tuominen M, Penttinen T, Räsänen JP, Kuusipalo J. 2009. The effects of corona and flame treatment: Part 2. PE-HD and PP coated papers. In TAPPI Press - 12th European PLACE Conference 2009. pp. 278-314.

Coatanéa E, Yannou B, Honkala S, Lajunen A, Saarelainen T, Makkonen P. 2008. Measurement theory and dimensional analysis: Methodological impact on the comparison and evaluation process. In 19th International Conference on Design Theory and Methodology and 1st International Conference on Micro and Nano Systems, presented at - 2007 ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2007. AMER SOC MECHANICAL ENGINEERS. pp. 173-182. https://doi.org/10.1115/DETC2007-34364

Lahtinen K, Kuusipalo J. 2008. Statistical modeling of water vapor transmission rates for extrusion-coated papers. In TAPPI 2008 PLACE Conference: Innovations in Flexible Consumer Packaging.

Lorimer GW, Dicken R, Peura P, Pilkington R, Younes CM, Allen GC, Holt MJ. 1996. The effect of phosphorous and arsenic on the fracture behaviour of a 2,25% Cr-1% Mo Steel. Materials Science Forum. 207-209(PART 2):645-648.