A comparison of five optical surface topography measurement methods

Mettänen, M. & Hirn, U., 1 Jan 2015, In : TAPPI Journal. 14, 1, p. 27-38 12 p.

Research output: Contribution to journalArticleScientificpeer-review

A comparison of relative displacement fields between numerical predictions and experimental results in fretting contact

Juoksukangas, J., Lehtovaara, A. & Mäntylä, A., 1 Oct 2016, In : Proceedings of the institution of Mechanical Engineers Part J: Journal of Engineering Tribology. 230, 10, p. 1273-1287 15 p.

Research output: Contribution to journalArticleScientificpeer-review

Adaptive and nonlinear control of discharge pressure for variable displacement axial piston pumps

Koivumäki, J. & Mattila, J., 1 Oct 2017, In : Journal of Dynamic Systems, Measurement and Control: Transactions of the ASME. 139, 10, 101008.

Research output: Contribution to journalArticleScientificpeer-review

A fractional representation approach to the robust regulation problem for SISO systems

Laakkonen, P. & Quadrat, A., 1 May 2017, In : Systems and Control Letters. 103, p. 32-37 6 p.

Research output: Contribution to journalArticleScientificpeer-review

A framework for building behavioral models for design-stage failure identification using dimensional analysis

Coatanéa, E., Ritola, T., Tumer, I. Y. & Jensen, D., 2010, Proceedings of the ASME Design Engineering Technical Conference. AMER SOC MECHANICAL ENGINEERS, Vol. 5. p. 591-601 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Analysing traffic fluency from bus data

Syrjärinne, P., Nummenmaa, J., Thanisch, P., Kerminen, R. & Hakulinen, E., 1 Aug 2015, In : IET Intelligent Transport Systems. 9, 6, p. 566-572 7 p.

Research output: Contribution to journalArticleScientificpeer-review

Analysis of common rail pressure signal of dual-fuel large industrial engine for identification of injection duration of pilot diesel injectors

Krogerus, T., Hyvönen, M. & Huhtala, K., Mar 2018, In : Fuel. 216, p. 1-9

Research output: Contribution to journalArticleScientificpeer-review

Analysis of thermo-active pile structures and their performance under groundwater flow conditions

Gashti, E. H. N., Malaska, M. & Kujala, K., 11 Aug 2015, In : Energy and Buildings. 105, p. 1-8 8 p.

Research output: Contribution to journalArticleScientificpeer-review

An Artificial Nocturnal Flower via Humidity-Gated Photoactuation in Liquid Crystal Networks

Wani, O. M., Verpaalen, R., Zeng, H., Priimagi, A. & Schenning, A. P. H. J., Jan 2019, In : Advanced Materials. 31, 2, 1805985.

Research output: Contribution to journalArticleScientificpeer-review

A near-infrared optoelectronic approach to detection of road conditions

Colace, L., Santoni, F. & Assanto, G., May 2013, In : Optics and Lasers in Engineering. 51, 5, p. 633-636 4 p.

Research output: Contribution to journalArticleScientificpeer-review

An exploratory study on strengthening and thermal stability of magnetron sputtered W nanoparticles at the interface of Cu/Ni multilayer films

Schoeppner, R. L., Mohanty, G., Polyakov, M. N., Petho, L., Maeder, X. & Michler, J., 2020, In : Materials and Design. 195, 9 p., 108907.

Research output: Contribution to journalArticleScientificpeer-review

An origami inspired reconfigurable spiral antenna

Saintsing, C. D., Cook, B. S. & Tentzeris, M. M., 2014, 38th Mechanisms and Robotics Conference. The American Society of Mechanical Engineers ASME, Vol. 5B.

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

A Reduced-Order Two-Degree-of-Freedom Composite Nonlinear Feedback Control for a Rotary DC Servo Motor

Pyrhönen, V-P., Koivisto, H. & Vilkko, M., 12 Dec 2017, Proceedings of the 56th IEEE Conference on Decision and Control. Melbourne, Australia, p. 2065-2071 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Assessing population vulnerability towards summer energy poverty: Case studies of Madrid and London

Sanchez-Guevara, C., Núñez Peiró, M., Taylor, J., Mavrogianni, A. & Neila González, J., 1 May 2019, In : Energy and Buildings. 190, p. 132-143 12 p.

Research output: Contribution to journalArticleScientificpeer-review

Assessment of pitting corrosion in bare and passivated (wet scCO2-induced patination and chemical passivation) hot-dip galvanized steel samples with SVET, FTIR, and SEM (EDS)

Saarimaa, V., Fuertes, N., Persson, D., Zavalis, T., Kaleva, A., Nikkanen, J-P., Levänen, E. & Heydari, G., 2020, In : Materials and Corrosion. 10 p.

Research output: Contribution to journalArticleScientificpeer-review

Asymptotics and approximation of large systems of ordinary differential equations

Paunonen, L. & Seifert, D., 2020, In : Systems and Control Letters. 140, 9 p., 104703.

Research output: Contribution to journalArticleScientificpeer-review

A system for real-time detection and tracking of vehicles from a single car-mounted camera

Caraffi, C., Vojir, T., Trefný, J., Šochman, J. & Matas, J., 2012, 2012 15th International IEEE Conference on Intelligent Transportation Systems, ITSC 2012. p. 975-982 8 p. 6338748

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

A TOpti simulation for finding fuel saving by optimising propulsion control and power management

Jaurola, M., Hedin, A., Tikkanen, S. & Huhtala, K., 2019, In : Journal of Marine Science and Technology (Japan).

Research output: Contribution to journalArticleScientificpeer-review

Avoiding the high friction peak in fretting contact

Juoksukangas, J., Hintikka, J., Lehtovaara, A., Mäntylä, A., Vaara, J. & Frondelius, T., 2020, In : Rakenteiden Mekaniikka. 53, 1, p. 12-19 8 p.

Research output: Contribution to journalArticleScientificpeer-review

Barkhausen Noise Probes and Modelling: A Review

Santa-aho, S., Laitinen, A., Sorsa, A. & Vippola, M., 1 Dec 2019, In : Journal of Nondestructive Evaluation. 38, 4, 94.

Research output: Contribution to journalReview ArticleScientificpeer-review

Barkhausen noise response of three different welded duplex stainless steels

Lindgren, M., Santa-aho, S. & Vippola, M., 1 Sep 2016, In : Insight. 58, 9, p. 480-486 7 p.

Research output: Contribution to journalArticleScientificpeer-review

Behaviour of leaded tin bronze in simulated seawater in the absence and presence of tribological contact with alumina counterbody: Corrosion, wear and tribocorrosion

Huttunen-Saarivirta, E., Isotahdon, E., Metsäjoki, J., Salminen, T., Ronkainen, H. & Carpén, L., 2019, In : Tribology International. 129, p. 257-271 15 p.

Research output: Contribution to journalArticleScientificpeer-review

Bioactive glass ions induce efficient osteogenic differentiation of human adipose stem cells encapsulated in gellan gum and collagen type I hydrogels

Vuornos, K., Ojansivu, M., Koivisto, J. T., Häkkänen, H., Belay, B., Montonen, T., Huhtala, H., Kääriäinen, M., Hupa, L., Kellomäki, M., Hyttinen, J., Ihalainen, J. A. & Miettinen, S., 1 Jun 2019, In : Materials Science and Engineering C. 99, p. 905-918 14 p.

Research output: Contribution to journalArticleScientificpeer-review

Biomimetic hemo-compatible surfaces of polyurethane by grafting copolymer brushes of poly(ethylene glycol) and poly(phosphorylcholine methacrylate)

Yang, D., Feng, Y., Behl, M., Lendlein, A., Zhao, H., Khan, M. & Guo, J., 2012, Multifunctional Polymer-Based Materials. Vol. 1403. p. 171-176 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Block copolymer self-assembly on ethylene glycol (EG) self-assembled monolayer (SAM) for nanofabrication

Borah, D., Rasappa, S., Kosmala, B., Holmes, J. D. & Morris, M. A., 2012, Nanoscale Materials Modification by Photon, Ion, and Electron Beams. Vol. 1450. p. 8-13 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Branched thiophene oligomer/polymer bulk heterojunction organic solar cell

Martinez, F., Neculqueo, G., Vasquez, S. O., Lemmetyinen, H., Efimov, A. & Vivo, P., 2015, Materials Research Society Symposium Proceedings. MATERIALS RESEARCH SOCIETY, Vol. 1737. p. 19-25 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

CFD modeling the diffusional losses of nanocluster-sized particles and condensing vapors in 90° bends of circular tubes

Olin, M. & Dal Maso, M., 2020, In : Journal of Aerosol Science. 150, 10 p., 105618.

Research output: Contribution to journalArticleScientificpeer-review

Characterization of cracks formed in large flat-on-flat fretting contact

Juoksukangas, J., Nurmi, V., Hintikka, J., Vippola, M., Lehtovaara, A., Mäntylä, A., Vaara, J. & Frondelius, T., Jul 2019, In : International Journal of Fatigue. 124, p. 361-370 10 p.

Research output: Contribution to journalArticleScientificpeer-review

Characterization of the microstructure and corrosion performance of Ce-alloyed Nd-Fe-B magnets

Isotahdon, E., Huttunen-Saarivirta, E. & Kuokkala, V., Jan 2017, In : Journal of Alloys and Compounds. 692, p. 190-197

Research output: Contribution to journalArticleScientificpeer-review

Chemically tailored dielectric-to-metal transition for the design of metamaterials from nanoimprinted colloidal nanocrystals

Fafarman, A. T., Hong, S. H., Caglayan, H., Ye, X., Diroll, B. T., Paik, T., Engheta, N., Murray, C. B. & Kagan, C. R., 13 Feb 2013, In : Nano Letters. 13, 2, p. 350-357 8 p.

Research output: Contribution to journalArticleScientificpeer-review

Chemical synthesis of WC-Co from water-soluble precursors: The effect of carbon and cobalt additions to WC synthesis

Kanerva, U., Karhu, M., Lagerbom, J., Kronlöf, A., Honkanen, M., Turunen, E. & Laitinen, T., 1 Apr 2016, In : International Journal of Refractory Metals and Hard Materials. 56, p. 69-75 7 p.

Research output: Contribution to journalArticleScientificpeer-review

Chip-by-chip configurable interconnection using digital printing techniques

Mashayekhi, M., Winchester, L., Laurila, M-M., Mäntysalo, M., Ogier, S., Terés, L. & Carrabina, J., 6 Mar 2017, In : Journal of Micromechanics and Microengineering. 27, 4, 045009.

Research output: Contribution to journalArticleScientificpeer-review

Circular dichroism in the second harmonic field evidenced by asymmetric AU coated gaas nanowires

Belardini, A., Leahu, G., Petronijevic, E., Hakkarainen, T., Koivusalo, E., Piton, M. R., Talmila, S., Guina, M. & Sibilia, C., 1 Feb 2020, In : Micromachines. 11, 2, p. 1-8 8 p.

Research output: Contribution to journalArticleScientificpeer-review

Co-electrospun blends of PU and PEG as potential biocompatible scaffolds for small-diameter vascular tissue engineering

Wang, H., Feng, Y., Fang, Z., Yuan, W. & Khan, M., 1 Dec 2012, In : Materials Science and Engineering C: Materials for Biological Applications. 32, 8, p. 2306-2315 10 p.

Research output: Contribution to journalArticleScientificpeer-review

Comparative environmental impacts of additive and subtractive manufacturing technologies

Paris, H., Mokhtarian, H., Coatanéa, E., Museau, M. & Ituarte, I. F., 2016, In : CIRP Annals: Manufacturing Technology. 65, 1, p. 29-32

Research output: Contribution to journalArticleScientificpeer-review

Complete Odometry Estimation of a Vehicle Using Single Automotive Radar and a Gyroscope

Ghabcheloo, R. & Siddiqui, S., 20 Aug 2018, MED 2018 - 26th Mediterranean Conference on Control and Automation. IEEE, p. 855-860 6 p. 8442474

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Computational design of a novel medium-carbon, low-alloy steel microalloyed with niobium

Javaheri, V., Nyyssönen, T., Grande, B. & Porter, D., Jun 2018, In : Journal of Materials Engineering and Performance. 27, 6, p. 2978-2992 15 p.

Research output: Contribution to journalArticleScientificpeer-review

Concepts, methods and tools for individualized production

Lanz, M. & Tuokko, R., 1 Apr 2017, In : PRODUCTION ENGINEERING. 11, 2, p. 205-212 8 p.

Research output: Contribution to journalArticleScientificpeer-review

Conductivity control via minimally invasive anti-Frenkel defects in a functional oxide

Evans, D. M., Holstad, T. S., Mosberg, A. B., Småbråten, D. R., Vullum, P. E., Dadlani, A. L., Shapovalov, K., Yan, Z., Bourret, E., Gao, D., Akola, J., Torgersen, J., van Helvoort, A. T. J., Selbach, S. M. & Meier, D., 2020, In : Nature Materials. 7 p.

Research output: Contribution to journalArticleScientificpeer-review

Conjugated Heat Transfer Simulation of a Fin-and-Tube Heat Exchanger

Välikangas, T. & Karvinen, R., 2018, In : Heat Transfer Engineering. 39, 13-14, p. 1192-1200 9 p.

Research output: Contribution to journalArticleScientificpeer-review

Consideration of energy consumption, energy costs, and space occupancy in Finnish daycare centres and school buildings

Sekki, T., Andelin, M., Airaksinen, M. & Saari, A., 1 Oct 2016, In : Energy and Buildings. 129, p. 199-206 8 p.

Research output: Contribution to journalArticleScientificpeer-review

Controlling liquid spreading using microfabricated undercut edges

Liimatainen, V., Sariola, V. & Zhou, Q., 24 Apr 2013, In : Advanced Materials. 25, 16, p. 2275-2278 4 p.

Research output: Contribution to journalArticleScientificpeer-review

Corrosion mechanisms of sintered Nd-Fe-B magnets in the presence of water as vapour, pressurised vapour and liquid

Isotahdon, E., Huttunen-Saarivirta, E., Heinonen, S., Kuokkala, V. T. & Paju, M., 25 Mar 2015, In : Journal of Alloys and Compounds. 626, p. 349-359 11 p.

Research output: Contribution to journalArticleScientificpeer-review

Cost optimal and nearly zero (nZEB) energy performance calculations for residential buildings with REHVA definition for nZEB national implementation

Kurnitski, J., Saari, A., Kalamees, T., Vuolle, M., Niemelä, J. & Tark, T., Nov 2011, In : Energy and Buildings. 43, 11, p. 3279-3288 10 p.

Research output: Contribution to journalArticleScientificpeer-review

Defined-size DNA triple crossover construct for molecular electronics: Modification, positioning and conductance properties

Linko, V., Leppiniemi, J., Paasonen, S. T., Hytönen, V. P. & Jussi Toppari, J., 8 Jul 2011, In : Nanotechnology. 22, 27, 275610.

Research output: Contribution to journalArticleScientificpeer-review

Deformability analysis and improvement in stretchable electronics systems through finite element analysis

Di Vito, D., Mosallaei, M., Vahed, B. K., Kanerva, M. & Mäntysalo, M., 2020, Proceedings of XXIV AIMETA Conference 2019. Carcaterra, A., Graziani, G. & Paolone, A. (eds.). Springer, p. 755-763 9 p. (Lecture Notes in Mechanical Engineering).

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Democratizing composites manufacturing -inexpensive tooling empowers new players

Antin, K. N. & Pärnänen, T., 1 Jul 2017, In : SAMPE Journal. 53, 4, p. 6-10 5 p.

Research output: Contribution to journalArticleScientificpeer-review

Deposition of dry particles on a fin-and-tube heat exchanger by a coupled soft-sphere DEM and CFD

Välikangas, T., Hærvig, J., Kuuluvainen, H., Dal Maso, M., Peltonen, P. & Vuorinen, V., 2019, In : International Journal of Heat and Mass Transfer. 19 p., 119046.

Research output: Contribution to journalArticleScientificpeer-review

Design and Control of a Flexible Joint as a Hydraulic Series Elastic Actuator for Manipulation Applications

Cao, X., Aref, M. M. & Mattila, J., 2019, Proceedings of the IEEE 2019 9th International Conference on Cybernetics and Intelligent Systems and Robotics, Automation and Mechatronics, CIS and RAM 2019. IEEE, p. 553-558 6 p. 9095773. (IEEE International Conference on Cybernetics and Intelligent Systems).

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Detection beyond Debye's length with an electrolyte-gated organic field-effect transistor

Palazzo, G., De Tullio, D., Magliulo, M., Mallardi, A., Intranuovo, F., Mulla, M. Y., Favia, P., Vikholm-Lundin, I. & Torsi, L., 2015, In : Advanced Materials. 27, 5, p. 911-916 6 p.

Research output: Contribution to journalArticleScientificpeer-review

Detection of gaseous species during KCl-induced high-temperature corrosion by the means of CPFAAS and CI-APi-TOF

Lehmusto, J., Olin, M., Viljanen, J., Kalliokoski, J., Mylläri, F., Toivonen, J., Dal Maso, M. & Hupa, L., 30 Aug 2019, In : Materials and Corrosion. 10 p.

Research output: Contribution to journalArticleScientificpeer-review

Development and numerical implementation of an anisotropic continuum damage model for concrete

Hartikainen, J., Kolari, K. & Kouhia, R., 2016, Advances in Fracture and Damage Mechanics XV. Trans Tech Publications Ltd, p. 115-118 4 p. (Key Engineering Materials; vol. 713).

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Development of expanded graphite filled natural rubber vulcanizates in presence and absence of carbon black: Mechanical, thermal and morphological properties

Malas, A., Das, C. K., Das, A. & Heinrich, G., 2012, In : Materials and Design. 39, p. 410-417 8 p.

Research output: Contribution to journalArticleScientificpeer-review

DIC measurements of the human heart during cardiopulmonary bypass surgery

Hokka, M., Mirow, N., Nagel, H., Vogt, S. & Kuokkala, V-T., 2016, Conference Proceedings of the Society for Experimental Mechanics Series. Springer New York LLC, Vol. 6. p. 51-59 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Differential basal-to-apical accessibility of lamin A/C epitopes in the nuclear lamina regulated by changes in cytoskeletal tension

Ihalainen, T. O., Aires, L., Herzog, F. A., Schwartlander, R., Moeller, J. & Vogel, V., 1 Dec 2015, In : Nature Materials. 14, 12, p. 1252-1261 10 p.

Research output: Contribution to journalArticleScientificpeer-review

Digital hydraulic multi-pressure actuator – the concept, simulation study and first experimental results

Huova, M., Aalto, A., Linjama, M., Huhtala, K., Lantela, T. & Pietola, M., 2017, In : International Journal of Fluid Power. 18, 3, p. 141-152 12 p.

Research output: Contribution to journalArticleScientificpeer-review

Digital image correlation study of the deformation and functioning of the human heart during open-heart surgery

Soltani, A., Curtze, S., Lahti, J., Järvelä, K., Laurikka, J., Hokka, M. & Kuokkala, V. T., 2018, Mechanics of Biological Systems, Materials and other topics in Experimental and Applied Mechanics - Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics. Springer New York LLC, Vol. 4. p. 19-27 9 p. (Conference Proceedings of the Society for Experimental Mechanics).

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Dimension reduction and decomposition using causal graph and qualitative analysis for aircraft concept design optimization

Wu, D., Coatanea, E. & Wang, G. G., 2017, 43rd Design Automation Conference. The American Society of Mechanical Engineers ASME

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Direct model predictive power control of a series-connected modular rectifier

Rossi, M., Liegmann, E., Karamanakos, P., Castelli-Dezza, F. & Kennel, R., 1 May 2019, PRECEDE 2019: 2019 IEEE International Symposium on Predictive Control of Electrical Drives and Power Electronics. IEEE, p. 1-6 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Dissolution, bioactivity and osteogenic properties of composites based on polymer and silicate or borosilicate bioactive glass

Houaoui, A., Lyyra, I., Agniel, R., Pauthe, E., Massera, J. & Boissière, M., 2019, In : Materials Science and Engineering C. 107, 110340.

Research output: Contribution to journalArticleScientificpeer-review

Divertor remote handling for DEMO: Concept design and preliminary FMECA studies

Carfora, D., Di Gironimo, G., Järvenpää, J., Huhtala, K., Määttä, T. & Siuko, M., 9 Jul 2015, In : Fusion Engineering and Design. 98-99, p. 1437-1441 5 p.

Research output: Contribution to journalArticleScientificpeer-review

Do properties of bioactive glasses exhibit mixed alkali behavior?

Wang, X., Fagerlund, S., Massera, J., Södergård, B. & Hupa, L., 2017, In : Journal of Materials Science. 52, 15, p. 8986–8997 12 p.

Research output: Contribution to journalArticleScientificpeer-review

Dynamic speckle analysis with smoothed intensity-based activity maps

Stoykova, E., Berberova, N., Kim, Y., Nazarova, D., Ivanov, B., Gotchev, A., Hong, J. & Kang, H., 1 Jun 2017, In : Optics and Lasers in Engineering. 93, p. 55-65 11 p.

Research output: Contribution to journalArticleScientificpeer-review

Effect of air gap on the adhesion of PET layer on cardboard substrate in extrusion coating

Suokas, E., 1 Jan 2017, 16th TAPPI European PLACE Conference 2017. TAPPI Press, p. 529-544 16 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Effect of energy measures on the values of energy efficiency indicators in Finnish daycare and school buildings

Sekki, T., Airaksinen, M. & Saari, A., 15 Mar 2017, In : Energy and Buildings. 139, p. 124-132 9 p.

Research output: Contribution to journalArticleScientificpeer-review

Effect of finish rolling and quench stop temperatures on impact-abrasive wear resistance of 0.35 % carbon direct-quenched steel

Haiko, O., Miettunen, I., Porter, D., Ojala, N., Ratia, V., Heino, V. & Kemppainen, A., 2017, In : Tribologia. 35, 1-2, p. 5-21 17 p.

Research output: Contribution to journalArticleScientificpeer-review

Effect of microstructure on the abrasive wear resistance of steels with hardness 450 HV

Haiko, O., Heino, V., Porter, D. A., Uusitalo, J. & Kömi, J., 2019, In : Tribologia. 36, 1, p. 54-57 4 p.

Research output: Contribution to journalArticleScientific

Effect of Multiple Impacts on the Deformation of Wear-Resistant Steels

Ratia, V., Rojacz, H., Terva, J., Valtonen, K., Badisch, E. & Kuokkala, V. T., 21 Jan 2015, In : Tribology Letters. 57, 2, 15.

Research output: Contribution to journalArticleScientificpeer-review

Effect of polyolefin molecular structure on product properties in extrusion coating

Suokas, E., 2019, 17th Biennial TAPPI European PLACE Conference 2019. TAPPI Press, p. 89-98 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Effect of pre-treatments on barrier properties of layers applied by atomic layer deposition onto polymer-coated substrates

Vähä-Nissi, M., Hirvikorpi, T., Sievänen, J., Salo, E., Harlin, A., Johansson, P. & Kuusipalo, J., 2011, 13th European PLACE Conference 2011. Vol. 1. p. 447 1 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Effect of rotor pole-shoe construction on losses of inverter-fed synchronous motors

Rasilo, P., Belahcen, A. & Arkkio, A., 2012, Proceedings - 2012 20th International Conference on Electrical Machines, ICEM 2012. p. 1282-1286 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Effects of added glazing on Balcony indoor temperatures: Field measurements

Hilliaho, K., Köliö, A., Pakkala, T., Lahdensivu, J. & Vinha, J., 2016, In : Energy and Buildings. 128, p. 458-472 15 p.

Research output: Contribution to journalArticleScientificpeer-review

Effects of adiabatic heating estimated from tensile tests with continuous heating

Vazquez Fernandez, N., Isakov, M., Hokka, M. & Kuokkala, V. T., 2018, Dynamic Behavior of Materials - Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics. Springer New York LLC, Vol. 1. p. 1-7 7 p. (Conference Proceedings of the Society for Experimental Mechanics).

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Effects of strain rate and confining pressure on the compressive behavior of Kuru granite

Hokka, M., Black, J., Tkalich, D., Fourmeau, M., Kane, A., Hoang, N. H., Li, C. C., Chen, W. W. & Kuokkala, V-T., 1 May 2016, In : International Journal of Impact Engineering. 91, p. 183-193 11 p.

Research output: Contribution to journalArticleScientificpeer-review

Electrolyte-gated organic field-effect transistor sensors based on supported biotinylated phospholipid bilayer

Magliulo, M., Mallardi, A., Mulla, M. Y., Cotrone, S., Pistillo, B. R., Favia, P., Vikholm-Lundin, I., Palazzo, G. & Torsi, L., 11 Apr 2013, In : Advanced Materials. 25, 14, p. 2090-2094 5 p.

Research output: Contribution to journalArticleScientificpeer-review

Elevated and cryogenic temperature micropillar compression of magnesium–niobium multilayer films

Thomas, K., Mohanty, G., Wehrs, J., Taylor, A. A., Pathak, S., Casari, D., Schwiedrzik, J., Mara, N., Spolenak, R. & Michler, J., 15 Aug 2019, In : Journal of Materials Science. 54, 15, p. 10884-10901 18 p.

Research output: Contribution to journalArticleScientificpeer-review

Employing Knowledge on Causal Relationship to Assist Multidisciplinary Design Optimization

Wu, D., Coatanea, E. & Wang, G. G., Apr 2019, In : Journal of Mechanical Design, Transactions of the ASME. 141, 4, 041402.

Research output: Contribution to journalArticleScientificpeer-review

Enablers and barriers of smart data-based asset management services in industrial business networks

Ahonen, T., Hanski, J., Hyvärinen, M., Kortelainen, H., Uusitalo, T., Vainio, H., Kunttu, S. & Koskinen, K., 2019, Lecture Notes in Mechanical Engineering. Pleiades Publishing, p. 51-60 10 p. (Lecture Notes in Mechanical Engineering).

Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

End-plate connections in Bi-axial bending - Measurements

Mäkinen, J., Fränti, K., Korhonen, M., Fillion, J. & Heinisuo, M., 2016, 13th International Aluminium Conference, Sustainability, Durability and Structural Advantages, : INALCO 2016; Naples; Italy; 21 September 2016 through 23 September 2016. Mazzolani, F. M., Squillace, A., Faggiano, B. & Bellucci, F. (eds.). Trans Tech Publications Ltd, Vol. 710. p. 275-280 6 p. (Key Engineering Materials; vol. 710).

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Enhanced multiaxial fatigue criterion that considers stress gradient effects

Ottosen, N. S., Ristinmaa, M. & Kouhia, R., 1 Nov 2018, In : International Journal of Fatigue. 116, p. 128-139 12 p.

Research output: Contribution to journalArticleScientificpeer-review

Enhanced resonant nonlinear absorption and optical limiting in Er3+ ions doped multicomponent tellurite glasses

Sajna, M. S., Perumbilavil, S., Prakashan, V. P., Sanu, M. S., Joseph, C., Biju, P. R. & Unnikrishnan, N. V., 1 Aug 2018, In : Materials Research Bulletin. 104, p. 227-235 9 p.

Research output: Contribution to journalArticleScientificpeer-review

Erbium-doped borosilicate glasses containing various amounts of P2O5 and Al2O3: Influence of the silica content on the structure and thermal, physical, optical and luminescence properties

Bourhis, K., Massera, J., Petit, L., Koponen, J., Fargues, A., Cardinal, T., Hupa, L., Hupa, M., Dussauze, M., Rodriguez, V. & Ferraris, M., 1 Oct 2015, In : Materials Research Bulletin. 70, p. 47-54 8 p.

Research output: Contribution to journalArticleScientificpeer-review

Erosive-abrasive wear behavior of carbide-free bainitic and boron steels compared in simulated field conditions

Vuorinen, E., Heino, V., Ojala, N., Haiko, O. & Hedayati, A., 2018, In : Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 232, 1, p. 3-13 11 p.

Research output: Contribution to journalArticleScientificpeer-review

Estimation of the largest expected photovoltaic power ramp rates

Lappalainen, K., Wang, G. C. & Kleissl, J., 15 Nov 2020, In : Applied Energy. 278, 13 p., 115636.

Research output: Contribution to journalArticleScientificpeer-review

Evaluating retrofit options in a historical city center: Relevance of bio-based insulation and the need to consider complex urban form in decision-making

Claude, S., Ginestet, S., Bonhomme, M., Escadeillas, G., Taylor, J., Marincioni, V., Korolija, I. & Altamirano, H., 1 Jan 2019, In : Energy and Buildings. 182, p. 196-204 9 p.

Research output: Contribution to journalArticleScientificpeer-review

Evaluating the electrode measurement sensitivity of subdermal electroencephalography electrodes

Mendes, M. R., Subramaniyam, N. P. & Wendel-Mitoraj, K., 1 Jul 2015, International IEEE/EMBS Conference on Neural Engineering, NER. IEEE COMPUTER SOCIETY PRESS, Vol. 2015-July. p. 1092-1095 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Evaluation of parts of a boat cabin based on exergy - Focusing on environmental and economic assessments

Medyna, G., Coatanea, E. & Millet, D., 2011, ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011. PARTS A AND B ed. AMER SOC MECHANICAL ENGINEERS, Vol. 4. p. 1083-1092 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Experimental and numerical investigation of fretting fatigue behavior in bolted joints

Juoksukangas, J., Lehtovaara, A. & Mäntylä, A., 1 Nov 2016, In : Tribology International. 103, p. 440-448 9 p.

Research output: Contribution to journalArticleScientificpeer-review

Experimental and numerical study of wall layer development in a tribocharged fluidized bed

Sippola, P., Kolehmainen, J., Ozel, A., Liu, X., Saarenrinne, P. & Sundaresan, S., 25 Aug 2018, In : Journal of Fluid Mechanics. 849, p. 860-884 25 p.

Research output: Contribution to journalArticleScientificpeer-review

Experimental study on the behavior of wear resistant steels under high velocity single particle impacts

Lindroos, M., Apostol, M., Kuokkala, V. T., Laukkanen, A., Valtonen, K., Holmberg, K. & Oja, O., 2015, In : International Journal of Impact Engineering. 78, p. 114-127 14 p.

Research output: Contribution to journalArticleScientificpeer-review

Fabrication of a sub-10 nm silicon nanowire based ethanol sensor using block copolymer lithography

Rasappa, S., Borah, D., Faulkner, C. C., Lutz, T., Shaw, M. T., Holmes, J. D. & Morris, M. A., 15 Feb 2013, In : Nanotechnology. 24, 6, 065503.

Research output: Contribution to journalArticleScientificpeer-review

Fabrication of soft devices with buried fluid channels by using sacrificial 3D printed molds

Koivikko, A. & Sariola, V., 24 May 2019, 2019 2nd IEEE International Conference on Soft Robotics (RoboSoft). IEEE, p. 509-513 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Feed-hopper level estimation and control in cone crushers

Itävuo, P., Hulthén, E. & Vilkko, M., 15 Aug 2017, In : Minerals Engineering. 110, p. 82-95 14 p.

Research output: Contribution to journalArticleScientificpeer-review

FEM-based wear simulation for fretting contacts

Mäntylä, A., Juoksukangas, J., Hintikka, J., Frondelius, T. & Lehtovaara, A., 2020, In : Rakenteiden Mekaniikka. 53, 1, p. 20-27 8 p.

Research output: Contribution to journalArticleScientificpeer-review

Fe2O3-TiO2 Nano-heterostructure Photoanodes for Highly Efficient Solar Water Oxidation

Barreca, D., Carraro, G., Gasparotto, A., Maccato, C., Warwick, M. E. A., Kaunisto, K., Sada, C., Turner, S., Gönüllü, Y., Ruoko, T-P., Borgese, L., Bontempi, E., Van Tendeloo, G., Lemmetyinen, H. & Mathur, S., 2015, In : Advanced Materials Interfaces. 2, 17

Research output: Contribution to journalArticleScientificpeer-review

Fin-and-tube heat exchanger enhancement with a combined herringbone and vortex generator design

Välikangas, T., Singh, S., Sørensen, K. & Condra, T., 2018, In : International Journal of Heat and Mass Transfer. 118, p. 602-616 15 p.

Research output: Contribution to journalArticleScientificpeer-review

Fluorine losses in Er3+oxyfluoride phosphate glasses and glass-ceramics

Szczodra, A., Mardoukhi, A., Hokka, M., Boetti, N. G. & Petit, L., 15 Aug 2019, In : Journal of Alloys and Compounds. 797, p. 797-803 7 p.

Research output: Contribution to journalArticleScientificpeer-review

Flux-Weakening Control for IPMSM Employing Model Order Reduction

Far, M. F., Mustafa, B., Martin, F., Rasilo, P. & Belahcen, A., 24 Oct 2018, 2018 23rd International Conference on Electrical Machines, ICEM 2018. IEEE, p. 1510-1516 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

FORMI: A Fast Holonomic Path Planning and Obstacle Representation Method Based on Interval Analysis

Mäenpää, P., Aref, M. M. & Mattila, J., 1 Nov 2019, Proceedings of the IEEE 2019 9th International Conference on Cybernetics and Intelligent Systems and Robotics, Automation and Mechatronics, CIS and RAM 2019. IEEE, p. 398-403 6 p. (IEEE International Conference on Cybernetics and Intelligent Systems).

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Framework and feasibility study for pairwise comparison tool

Ellman, A., Wendrich, R. & Tiainen, T., 21 Aug 2016, Proceedings of the ASME 2016 Computers and Information in Engineering Conference IDETC/CIE 2016. Charlotte, North Carolina: ASME, 7 p. DETC2016-59886

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Fretting-induced friction and wear in large flat-on-flat contact with quenched and tempered steel

Hintikka, J., Lehtovaara, A. & Mäntylä, A., 2 Jul 2015, In : Tribology International. 92, p. 191-202 12 p.

Research output: Contribution to journalArticleScientificpeer-review

From Responsive Molecules to Interactive Materials

Priimägi, A. (ed.) & Hecht, S. (ed.), 2020, In : Advanced Materials. 32, 20, 3 p., 2000215.

Research output: Contribution to journalEditorialScientific

Generic platform for manufacturing execution system functions in knowledge-driven manufacturing systems

Mohammed, W. M., Ramis Ferrer, B., Iarovyi, S., Negri, E., Fumagalli, L., Lobov, A. & Martinez Lastra, J. L., 4 Mar 2018, In : International Journal of Computer Integrated Manufacturing. p. 1-13 13 p.

Research output: Contribution to journalArticleScientificpeer-review

Global energy consumption due to friction and wear in the mining industry

Holmberg, K., Kivikytö-Reponen, P., Härkisaari, P., Valtonen, K. & Erdemir, A., 1 Nov 2017, In : Tribology International. 115, p. 116-139 24 p.

Research output: Contribution to journalArticleScientificpeer-review

Graph based representation and analyses for conceptual stages

Coatanéa, E., Nonsiri, S., Christophe, F. & Mokammel, F., 2014, 34th Computers and Information in Engineering Conference. The American Society of Mechanical Engineers ASME, Vol. 1A.

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Graphoepitaxial Directed Self-Assembly of Polystyrene-Block-Polydimethylsiloxane Block Copolymer on Substrates Functionalized with Hexamethyldisilazane to Fabricate Nanoscale Silicon Patterns

Borah, D., Rasappa, S., Senthamaraikannan, R., Holmes, J. D. & Morris, M. A., 1 Jun 2014, In : Advanced Materials Interfaces. 1, 3, 1300102.

Research output: Contribution to journalArticleScientificpeer-review

Heat Transfer of Impinging Jet: Effect of Compressibility and Turbulent Kinetic Energy Production

Mikkonen, A. & Karvinen, R., 2017, IX International Conference on Computational Heat and Mass Transfer (ICCHMT 2016) .

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Hexaferrite/polyethylene Composite coatings prepared with flame spraying

Lisjak, D., Lintunen, P., Hujanen, A., Varis, T., Bolelli, G., Lusvarghi, L., Jagodič, M. & Drofenik, M., 15 Feb 2011, In : Materials Letters. 65, 3, p. 534-536 3 p.

Research output: Contribution to journalArticleScientificpeer-review

Highly conducting polychloroprene composites based on multi-walled carbon nanotubes and 1-butyl 3-methyl imidazolium bis(trifluoromethylsulphonyl)imide

Subramaniam, K., Das, A. & Heinrich, G., Jul 2012, In : KGK: KAUTSCHUK GUMMI KUNSTSTOFFE. 65, 7-8, p. 44-46 3 p.

Research output: Contribution to journalArticleScientificpeer-review

High-order lattice-Boltzmann

Philippi, P. C., Siebert, D. N., Hegele, L. A. & Mattila, K. K., 1 Jun 2016, In : Journal of the Brazilian Society of Mechanical Sciences and Engineering. 38, 5, p. 1401-1419 19 p.

Research output: Contribution to journalArticleScientificpeer-review

High performance natural rubber composites with a hierarchical reinforcement structure of carbon nanotube modified natural fibers

Tzounis, L., Debnath, S., Rooj, S., Fischer, D., Mäder, E., Das, A., Stamm, M. & Heinrich, G., 2014, In : Materials and Design. 58, p. 1-11 11 p.

Research output: Contribution to journalArticleScientificpeer-review

High Temperature Tension HSB Device Based on Direct Electrical Heating

Hokka, M., Östman, K., Rämö, J. & Kuokkala, V. T., 2015, Dynamic Behavior of Materials, Volume 1: Proceedings of the 2014 Annual Conference on Experimental and Applied Mechanics. Song, B., Casem, D. & Kimberley, J. (eds.). Springer, Vol. 65. p. 227-233 7 p. (Conference Proceedings of the Society for Experimental Mechanics Series).

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Hot-box measurements to investigate the internal convection of highly insulated loose-fill insulation roof structures

Kivioja, H. & Vinha, J., 1 Jun 2020, In : Energy and Buildings. 216, 10 p., 109934.

Research output: Contribution to journalArticleScientificpeer-review

Hydrazone crosslinked hyaluronan-based hydrogels for therapeutic delivery of adipose stem cells to treat corneal defects

Koivusalo, L., Karvinen, J., Sorsa, E., Jönkkäri, I., Väliaho, J., Kallio, P., Ilmarinen, T., Miettinen, S., Skottman, H. & Kellomäki, M., Apr 2018, In : Materials Science and Engineering C. 85, p. 68-78 11 p.

Research output: Contribution to journalArticleScientificpeer-review

Hyperspectral phase imaging based on denoising in complex-valued eigensubspace

Shevkunov, I., Katkovnik, V., Claus, D., Pedrini, G., Petrov, N. V. & Egiazarian, K., 1 Apr 2020, In : Optics and Lasers in Engineering. 127, 10 p., 105973.

Research output: Contribution to journalArticleScientificpeer-review

Icephobicity of Slippery Liquid Infused Porous Surfaces under Multiple Freeze–Thaw and Ice Accretion–Detachment Cycles

Niemelä-Anttonen, H., Koivuluoto, H., Tuominen, M., Teisala, H., Juuti, P., Haapanen, J., Harra, J., Stenroos, C., Lahti, J., Kuusipalo, J., Mäkelä, J. M. & Vuoristo, P., Oct 2018, In : Advanced Materials Interfaces. 5, 20

Research output: Contribution to journalArticleScientificpeer-review

Impact of building usage and occupancy on energy consumption in Finnish daycare and school buildings

Sekki, T., Airaksinen, M. & Saari, A., 18 Aug 2015, In : Energy and Buildings. 105, p. 247-257 11 p.

Research output: Contribution to journalArticleScientificpeer-review

Impact wear and mechanical behavior of steels at subzero temperatures

Valtonen, K., Ratia, V., Ramakrishnan, K. R., Apostol, M., Terva, J. & Kuokkala, V-T., 2019, In : Tribology International. 129, p. 476-493 18 p.

Research output: Contribution to journalArticleScientificpeer-review

Implementation of a direct procedure for critical point computations using preconditioned iterative solvers

Kouhia, R., Tůma, M., Mäkinen, J., Fedoroff, A. & Marjamäki, H., Oct 2012, In : Computers & Structures. 108-109, p. 110-117 8 p.

Research output: Contribution to journalArticleScientificpeer-review

Improved dimensional stability with bioactive glass fibre skeleton in poly(lactide-co-glycolide) porous scaffolds for tissue engineering

Haaparanta, A-M., Uppstu, P., Hannula, M., Ellä, V., Rosling, A. & Kellomäki, M., 20 Jul 2015, In : Materials Science and Engineering C: Materials for Biological Applications. 56, p. 457-466 10 p., 5584.

Research output: Contribution to journalArticleScientificpeer-review

Improving the effect of a nanoscale barrier coating on BOPP film properties by surface pretreatments

Lahtinen, K., Lahti, J., Johansson, P., Seppänen, T. & Cameron, D. C., 2013, 14th European PLACE Conference 2013. TAPPI Press, Vol. 1. p. 469-493 25 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Improving the effect of nanoscale barrier coating on BOPP film properties: Influence of substrate contamination, web handling and pretreatments

Lahti, J., Johansson, P., Lahtinen, K., Cameron, D. C. & Seppänen, T., 2014, TAPPI PLACE Conference 2014. TAPPI Press, Vol. 2. p. 1039-1061 23 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Improving the thermal performance of concrete-sandwich envelopes in relation to the moisture behaviour of building structures in boreal conditions

Fedorik, F., Malaska, M., Hannila, R. & Haapala, A., 15 Nov 2015, In : Energy and Buildings. 107, p. 226-233 8 p.

Research output: Contribution to journalArticleScientificpeer-review

Improving the toughness of thermally sprayed Cr 3C 2-NiCr hardmetal coatings by laser post-treatment

Janka, L., Norpoth, J., Eicher, S., Rodríguez Ripoll, M. & Vuoristo, P., 15 May 2016, In : Materials and Design. 98, p. 135-142 8 p.

Research output: Contribution to journalArticleScientificpeer-review

Inertial Sensor-Based State Estimation of Flexible Links Subject to Bending and Torsion

Mäkinen, P., Mononen, T. & Mattila, J., 27 Aug 2018, 2018 14th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications, MESA 2018. IEEE, 8 p. 8449188

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Influence of specimen type and reinforcement on measured tension-tension fatigue life of unidirectional GFRP laminates

Korkiakoski, S., Brøndsted, P., Sarlin, E. & Saarela, O., 1 Apr 2016, In : International Journal of Fatigue. 85, p. 114-129 16 p.

Research output: Contribution to journalArticleScientificpeer-review

Introducing Multi-Convexity in Path Constrained Trajectory Optimization for Mobile Manipulators

Singh, A. K., Ahonen, A., Ghabcheloo, R. & Mueller, A., 2020, European Control Conference 2020, ECC 2020. IEEE, p. 1178-1185 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Investigating the kinetics and biofuel properties of Alstonia congensis and Ceiba pentandra via torrefaction

Oluoti, K., Doddapaneni, T. R. K. C. & Richards, T., 1 May 2018, In : Energy. 150, p. 134-141 8 p.

Research output: Contribution to journalArticleScientificpeer-review

Investigation on positioning control strategy and switching optimization of an equal coded digital valve system

Gao, Q., Linjama, M., Paloniitty, M. & Zhu, Y., 2019, In : Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering.

Research output: Contribution to journalArticleScientificpeer-review

Käyräviivaiset koordinaatistot kontinuumimekaniikassa

Holopainen, S., 2020, In : Rakenteiden Mekaniikka. 53, 2, p. 53-66 14 p.

Research output: Contribution to journalArticleScientificpeer-review

Kinetics and thermochemistry of the reaction of 3-methylpropargyl radical with molecular oxygen

Pekkanen, T. T., Timonen, R. S., Lendvay, G., Rissanen, M. P. & Eskola, A. J., 1 Jan 2019, In : PROCEEDINGS OF THE COMBUSTION INSTITUTE. 37, 1, p. 299-306 8 p.

Research output: Contribution to journalArticleScientificpeer-review

Kirigami-Based Light-Induced Shape-Morphing and Locomotion

Cheng, Y. C., Lu, H. C., Lee, X., Zeng, H. & Priimagi, A., 2019, In : Advanced Materials. 1906233.

Research output: Contribution to journalArticleScientificpeer-review

Knowledge-based artificial neural network (KB-ANN) in engineering: Associating functional architecture modeling, dimensional analysis and causal graphs to produce optimized topologies for KB-ANNs

Coatanéa, E., Wu, D., Tsarkov, V., Gary Wang, G., Modi, S. & Jafarian, H., 2018, 38th Computers and Information in Engineering Conference. The American Society of Mechanical Engineers ASME, Vol. 1B-2018. 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Less Is More: Enhancement of Second-Harmonic Generation from Metasurfaces by Reduced Nanoparticle Density

Czaplicki, R., Kiviniemi, A., Huttunen, M. J., Zang, X., Stolt, T., Vartiainen, I., Butet, J., Kuittinen, M., Martin, O. J. F. & Kauranen, M., 12 Dec 2018, In : Nano Letters. 18, 12, p. 7709-7714 6 p.

Research output: Contribution to journalArticleScientificpeer-review

Light Robots: Bridging the Gap between Microrobotics and Photomechanics in Soft Materials

Zeng, H., Wasylczyk, P., Wiersma, D. S. & Priimagi, A., 2018, In : Advanced Materials. 30, 24, 1703554.

Research output: Contribution to journalArticleScientificpeer-review

Lithography-free oxide patterns as templates for self-catalyzed growth of highly uniform GaAs nanowires on Si(111)

Hakkarainen, T. V., Schramm, A., Mäkelä, J., Laukkanen, P. & Guina, M., 18 Jul 2015, In : Nanotechnology. 26, 27, 275301.

Research output: Contribution to journalArticleScientificpeer-review

Locomotion of light-driven soft microrobots through a hydrogel via local melting

Palagi, S., Mark, A. G., Melde, K., Qiu, T., Zeng, H., Parmeggiani, C., Martella, D., Wiersma, D. S. & Fischer, P., 3 Aug 2017, International Conference on Manipulation, Automation and Robotics at Small Scales, MARSS 2017 - Proceedings. IEEE

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Low temperature afterglow from SrAl2O4: Eu, Dy, B containing glass

Vitola, V., Lahti, V., Bite, I., Spustaka, A., Millers, D., Lastusaari, M., Petit, L. & Smits, K., 2020, In : Scripta Materialia. 190, p. 86-90 5 p.

Research output: Contribution to journalArticleScientificpeer-review

Luminescence of Er3+ doped oxyfluoride phosphate glasses and glass-ceramics

Nommeots-Nomm, A., Boetti, N. G., Salminen, T., Massera, J., Hokka, M. & Petit, L., 30 Jun 2018, In : Journal of Alloys and Compounds. 751, p. 224-230 7 p.

Research output: Contribution to journalArticleScientificpeer-review

Market implementation of active and intelligent packaging-opportunities from a socio-economic perspective

Lahti, J., 2019, 17th Biennial TAPPI European PLACE Conference 2019. TAPPI Press, p. 419-427 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Mass balance control of crushing circuits

Itävuo, P., Hulthén, E., Yahyaei, M. & Vilkko, M., May 2019, In : Minerals Engineering. 135, p. 37-47 11 p.

Research output: Contribution to journalArticleScientificpeer-review

Materials for electronics by thermal spraying

Ronkainen, H., Kanerva, U., Varis, T., Ruusuvuori, K., Turunen, E., Peräntie, J., Putaala, J., Juuti, J. & Jantunen, H., 2013, Physical and Numerical Simulation of Materials Processing VII. Vol. 762. p. 451-456 6 p. (Materials Science Forum; vol. 762).

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Measured energy consumption of educational buildings in a Finnish city

Sekki, T., Airaksinen, M. & Saari, A., 1 Jan 2015, In : Energy and Buildings. 87, p. 105-115 11 p.

Research output: Contribution to journalArticleScientificpeer-review

Measurements and Modeling of Frost Depth in Railway Tracks

Pylkkänen, K., Nurmikolu, A., Guthrie, W. S. & Argyle, H. M., 2015, Proceedings of the International Conference on Cold Regions Engineering: 16th International Conference on Cold Regions Engineering 2015. American Society of Civil Engineers ASCE, p. 123-134 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Measurement theory and dimensional analysis: Methodological impact on the comparison and evaluation process

Coatanéa, E., Yannou, B., Honkala, S., Lajunen, A., Saarelainen, T. & Makkonen, P., 2008, 19th International Conference on Design Theory and Methodology and 1st International Conference on Micro and Nano Systems, presented at - 2007 ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2007. AMER SOC MECHANICAL ENGINEERS, p. 173-182 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Mechanically Switchable Elastomeric Microfibrillar Adhesive Surfaces for Transfer Printing

Sariola, V. & Sitti, M., 1 Jul 2014, In : Advanced Materials Interfaces. 1, 4, 1300159.

Research output: Contribution to journalArticleScientificpeer-review

M-Estimator Application in Real-Time Sensor Fusion for Smooth Position Feedback of Heavy-Duty Field Robots

Liikanen, H., Aref, M. M. & Mattila, J., 2019, Proceedings of the IEEE 2019 9th International Conference on Cybernetics and Intelligent Systems (CIS) and IEEE Conference on Robotics, Automation and Mechatronics (RAM). IEEE, p. 368-373 6 p. (IEEE International Conference on Cybernetics and Intelligent Systems).

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Modeling of steels and steel surfaces using quantum mechanical first principles methods

Alatalo, M., Pitkänen, H., Ropo, M., Kokko, K. & Vitos, L., 2013, Physical and Numerical Simulation of Materials Processing VII. Vol. 762. p. 445-450 6 p. (Materials Science Forum; vol. 762).

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Model Order Reduction of Bearingless Reluctance Motor Including Eccentricity

Far, M. F., Mukherjee, V., Martin, F., Rasilo, P. & Belahcen, A., 24 Oct 2018, 2018 23rd International Conference on Electrical Machines, ICEM 2018. IEEE, p. 2243-2249 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Multicriteria selection in concept design of a divertor remote maintenance port in the EU DEMO reactor using an AHP participative approach

Carfora, D., Gironimo, G. D., Esposito, G., Huhtala, K., Määttä, T., Mäkinen, H., Miccichè, G. & Mozzillo, R., 15 Nov 2016, In : Fusion Engineering and Design. 112, p. 324-331 8 p.

Research output: Contribution to journalArticleScientificpeer-review

Multiresonant High-Q Plasmonic Metasurfaces

Reshef, O., Saad-Bin-Alam, M., Huttunen, M. J., Carlow, G., Sullivan, B. T., Ménard, J. M., Dolgaleva, K. & Boyd, R. W., 11 Sep 2019, In : Nano Letters. 19, 9, p. 6429-6434 6 p.

Research output: Contribution to journalArticleScientificpeer-review

Multi-sensor next-best-view planning as matroid-constrained submodular maximization

Lauri, M., Pajarinen, J., Peters, J. & Frintrop, S., 2020, In : IEEE Robotics and Automation Letters. 5, 4, p. 5323-5330 8 p.

Research output: Contribution to journalArticleScientificpeer-review

Nanocellulose and Polylactic Acid Based Multilayer Coatings for Barrier Applications

Lahti, J., 2019, 17th Biennial TAPPI European PLACE Conference 2019. TAPPI Press, p. 446-455 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Nanoparticle deposition on packaging materials by the liquid flame spray

Teisala, H., Tuominen, M., Aromaa, M., Mäkelä, J. M., Stepien, M., Saarinen, J. J., Toivakka, M. & Kuusipalo, J., 2011, 13th European PLACE Conference 2011. Vol. 1. 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Nanoscale barrier coating on BOPP packaging film by ALD

Lahti, J., 2016, TAPPI PLACE Conference 2016: Exploring New Frontiers. TAPPI Press, p. 493-505 13 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Naturally occurring amino acids: A suitable substitute of N-N/-di-phenyl guanidine (DPG) in silica tyre formulation?

Debnath, S. C., Das, A., Basu, D. & Heinrich, G., Jan 2013, In : KGK: KAUTSCHUK GUMMI KUNSTSTOFFE. 66, 1-2, p. 25-31 7 p.

Research output: Contribution to journalArticleScientificpeer-review

New design of textile light diffusers for photodynamic therapy

Cochrane, C., Mordon, S. R., Lesage, J. C. & Koncar, V., 1 Apr 2013, In : Materials Science and Engineering C: Materials for Biological Applications. 33, 3, p. 1170-1175 6 p.

Research output: Contribution to journalArticleScientificpeer-review

Noncovalent functionalization of reduced graphene oxide with pluronic F127 and its nanocomposites with gum arabic

Layek, R. K., Uddin, M. E., Kim, N. H., Tak Lau, A. K. & Lee, J. H., 1 Nov 2017, In : Composites Part B : Engineering. 128, p. 155-163 9 p.

Research output: Contribution to journalArticleScientificpeer-review

Nonlinear model predictive energy management of hydrostatic drive transmissions

Backas, J. & Ghabcheloo, R., 1 Mar 2019, In : Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering. 233, 3, p. 335-347

Research output: Contribution to journalArticleScientificpeer-review

Normal displacements in non-Coulomb friction conditions during fretting

Hintikka, J., Lehtovaara, A. & Mäntylä, A., 2016, In : Tribology International. 94, p. 633-639

Research output: Contribution to journalArticleScientificpeer-review

Novel bio-based materials for active and intelligent packaging

Lahti, J., Kamppuri, T. & Kuusipalo, J., 1 Jan 2017, 16th TAPPI European PLACE Conference 2017. TAPPI Press, 1 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Novel equipment to simulate hot air heat sealability of packaging materials

Lahti, J., Kuusipalo, J. & Auvinen, S., 1 Jan 2017, 16th TAPPI European PLACE Conference 2017. TAPPI Press, p. 237-248 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Observation of Coexistence of Yu-Shiba-Rusinov States and Spin-Flip Excitations

Kezilebieke, S., Žitko, R., Dvorak, M., Ojanen, T. & Liljeroth, P., 10 Jul 2019, In : Nano Letters. 19, 7, p. 4614-4619 6 p.

Research output: Contribution to journalArticleScientificpeer-review

On the effect of deformation twinning and microstructure to strain hardening of high manganese austenitic steel 3D microstructure aggregates at large strains

Lindroos, M., Laukkanen, A., Cailletaud, G. & Kuokkala, V-T., 2017, In : International Journal of Solids and Structures. 125, p. 68-76

Research output: Contribution to journalArticleScientificpeer-review

On the threshold based neuronal spike detection, and an objective criterion for setting the threshold

Tanskanen, J. M. A., Kapucu, F. E. & Hyttinen, J. A. K., 1 Jul 2015, International IEEE/EMBS Conference on Neural Engineering, NER. IEEE COMPUTER SOCIETY PRESS, p. 1016-1019 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Operating point dependent variable switching point predictive current control for PMSM drives

Wendel, S., Karamanakos, P., Dietz, A. & Kennel, R., 1 May 2019, PRECEDE 2019: 2019 IEEE International Symposium on Predictive Control of Electrical Drives and Power Electronics. IEEE, p. 1-6 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Optical interference lithography using azobenzene-functionalized polymers for micro-and nanopatterning of silicon

Kravchenko, A., Shevchenko, A., Ovchinnikov, V., Priimagi, A. & Kaivola, M., 22 Sep 2011, In : Advanced Materials. 23, 36, p. 4174-4177 4 p.

Research output: Contribution to journalArticleScientificpeer-review

Optimised selection of new protective coatings for biofuel boiler applications

Tuurna, S., Varis, T., Penttilä, K., Ruusuvuori, K., Holmström, S. & Yli-Olli, S., Jul 2011, In : Materials and Corrosion-Werkstoffe und Korrosion. 62, 7, p. 642-649 8 p.

Research output: Contribution to journalArticleScientificpeer-review

Optimizing ammonium adsorption on natural zeolite for wastewaters with high loads of ammonium and solids

Taddeo, R., Prajapati, S. & Lepistö, R., 2017, In : Journal of Porous Materials. 24, 6, p. 1545–1554 10 p.

Research output: Contribution to journalArticleScientificpeer-review

Persistent luminescent borosilicate glasses using direct particles doping method

Roldán Del Cerro, P., Salminen, T., Lastusaari, M. & Petit, L., 1 Jul 2018, In : Scripta Materialia. 151, p. 38-41 4 p.

Research output: Contribution to journalArticleScientificpeer-review

Phosphate/oxyfluorophosphate glass crystallization and its impact on dissolution and cytotoxicity

Nommeots-Nomm, A., Houaoui, A., Pradeepan Packiyanathar, A., Chen, X., Hokka, M., Hill, R., Pauthe, E., Petit, L., Boissière, M. & Massera, J., 2020, In : Materials Science and Engineering C. 117, 15 p., 111269.

Research output: Contribution to journalArticleScientificpeer-review

Pneumatically actuated elastomeric device for simultaneous mechanobiological studies & live-cell fluorescent microscopy

Kreutzer, J., Viehrig, M., Maki, A-J., Kallio, P., Rahikainen, R. & Hytönen, V., 3 Aug 2017, International Conference on Manipulation, Automation and Robotics at Small Scales, MARSS 2017 - Proceedings. IEEE

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Pneumatic unidirectional cell stretching device for mechanobiological studies of cardiomyocytes

Kreutzer, J., Viehrig, M., Pölönen, R. P., Zhao, F., Ojala, M., Aalto-Setälä, K. & Kallio, P., 23 Aug 2019, In : BIOMECHANICS AND MODELING IN MECHANOBIOLOGY.

Research output: Contribution to journalArticleScientificpeer-review

Position Estimation for Drones based on Visual SLAM and IMU in GPS-denied Environment

Motlagh, H. D. K., Lotfi, F., Taghirad, H. D. & Germi, S. B., 1 Nov 2019, ICRoM 2019 - 7th International Conference on Robotics and Mechatronics. IEEE, p. 120-124 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Potential of renewable fuel to reduce diesel exhaust particle emissions

Pirjola, L., Kuuluvainen, H., Timonen, H., Saarikoski, S., Teinilä, K., Salo, L., Datta, A., Simonen, P., Karjalainen, P., Kulmala, K. & Rönkkö, T., 15 Nov 2019, In : Applied Energy. 254, 113636.

Research output: Contribution to journalArticleScientificpeer-review

Prediction of contact condition and surface damage by simulating variable friction coefficient and wear

Mäntylä, A., Hintikka, J., Frondelius, T., Vaara, J., Lehtovaara, A. & Juoksukangas, J., 5 Nov 2019, In : Tribology International. 11 p., 106054.

Research output: Contribution to journalArticleScientificpeer-review

Probabilistic approach to physical object disentangling

Pajarinen, J., Arenz, O., Peters, J. & Neumann, G., 2020, In : IEEE Robotics and Automation Letters. 5, 4, p. 5510-5517 8 p.

Research output: Contribution to journalArticleScientificpeer-review

Real-time and Robust Collaborative Robot Motion Control with Microsoft Kinect ® v2

Teke, B., Lanz, M., Kämäräinen, J-K. & Hietanen, A., 27 Aug 2018, 2018 14th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications, MESA 2018. IEEE, 6 p. 8449156

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Recurrence network analysis of wide band oscillations of local field potentials from the primary motor cortex reveals rich dynamics.

Subramaniyam, N. P., Hyttinen, J., Hatsopoulos, N. G. & Takahashi, K., 1 Jul 2015, International IEEE/EMBS Conference on Neural Engineering, NER. IEEE COMPUTER SOCIETY PRESS, p. 960-963 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Redox-active, organometallic surface-relief gratings from azobenzene-containing polyferrocenylsilane block copolymers

Ahmed, R., Priimagi, A., Faul, C. F. J. & Manners, I., 14 Feb 2012, In : Advanced Materials. 24, 7, p. 926-931 6 p.

Research output: Contribution to journalArticleScientificpeer-review

Redundant robotic manipulator path planning for real-time obstacle and self-collision avoidance

Kivelä, T., Mattila, J., Puura, J. & Launis, S., 21 Jun 2017, Advances in Service and Industrial Robotics: Proceedings of the 26th International Conference on Robotics in Alpe-Adria-Danube Region, RAAD 2017. Ferraresi, C. & Quaglia, G. (eds.). Springer International Publishing, p. 208-216 9 p. (Mechanisms and Machine Science; vol. 49).

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Remote diagnostics application software for remote handling equipment

Alanen, J., Ruiz Morales, E., Muhammad, A., Saarinen, H. & Minkkinen, J., 2019, In : Fusion Engineering and Design.

Research output: Contribution to journalArticleScientificpeer-review

Resilient Cooperative Voltage Control for Distribution Network with High Penetration Distributed Energy Resources

Gusrialdi, A., Xu, Y., Qu, Z. & Simaan, M. A., 2020, European Control Conference 2020, ECC 2020. IEEE, p. 1533-1539 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Role-based visualization of industrial IoT-based systems

Mahmoodpour, M., Lobov, A., Lanz, M., Mäkelä, P. & Rundas, N., 27 Aug 2018, 2018 14th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications, MESA 2018. IEEE, 8 p. 8449183

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Roll-to-roll coating by liquid flame spray nanoparticle deposition

Mäkelä, J. M., Haapanen, J., Aromaa, M., Teisala, H., Tuominen, M., Stepien, M., Saarinen, J. J., Toivakka, M. & Kuusipalo, J., 2015, Materials Research Society Symposium Proceedings. MATERIALS RESEARCH SOCIETY, Vol. 1747. p. 37-42 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Running-in effects on friction of journal bearings under slow sliding speeds

Linjamaa, A., Lehtovaara, A., Kallio, M. & Léger, A., 2019, In : Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology.

Research output: Contribution to journalArticleScientificpeer-review

Running-in in fretting, transition from near-stable friction regime to gross sliding

Hintikka, J., Mäntylä, A., Vaara, J., Frondelius, T., Juoksukangas, J. & Lehtovaara, A., Nov 2019, In : Tribology International. 143, 9 p., 106073.

Research output: Contribution to journalArticleScientificpeer-review

Second-Harmonic Generation from Metal Nanoparticles: Resonance Enhancement versus Particle Geometry

Czaplicki, R., Mäkitalo, J., Siikanen, R., Husu, H., Lehtolahti, J., Kuittinen, M. & Kauranen, M., 14 Jan 2015, In : Nano Letters. 15, 1, p. 530-534 5 p.

Research output: Contribution to journalArticleScientificpeer-review

Second-harmonic generation imaging of semiconductor nanowires with focused vector beams

Bautista, G., Mäkitalo, J., Chen, Y., Dhaka, V., Grasso, M., Karvonen, L., Jiang, H., Huttunen, M. J., Huhtio, T., Lipsanen, H. & Kauranen, M., 6 Feb 2015, In : Nano Letters. 15, 3, p. 1564-1569 6 p.

Research output: Contribution to journalArticleScientificpeer-review

Self-alignment in the stacking of microchips with mist-induced water droplets

Chang, B., Sariola, V., Jääskeläinen, M. & Zhou, Q., Jan 2011, In : Journal of Micromechanics and Microengineering. 21, 1, 015016.

Research output: Contribution to journalArticleScientificpeer-review

Self-alignment of RFID dies on four-pad patterns with water droplet for sparse self-assembly

Chang, B., Routa, I., Sariola, V. & Zhou, Q., Sep 2011, In : Journal of Micromechanics and Microengineering. 21, 9, 095024.

Research output: Contribution to journalArticleScientificpeer-review

Semantic analysis of function-solution duality

Christophe, F., Ritola, T., Coatanéa, E. & Bernard, A., 2011, ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011. Vol. 3. p. 611-619 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Shape-dependent plasmonic response and directed self-assembly in a new semiconductor building block, indium-doped cadmium oxide (ICO)

Gordon, T. R., Paik, T., Klein, D. R., Naik, G. V., Caglayan, H., Boltasseva, A. & Murray, C. B., 12 Jun 2013, In : Nano Letters. 13, 6, p. 2857-2863 7 p.

Research output: Contribution to journalArticleScientificpeer-review

Shedding frequency in cavitation erosion evolution tracking

Ylönen, M., Franc, J. P., Miettinen, J., Saarenrinne, P. & Fivel, M., 1 Sep 2019, In : International Journal of Multiphase Flow. 118, p. 141-149 9 p.

Research output: Contribution to journalArticleScientificpeer-review

Simulating the Drag Coefficient of a Spherical Autonomous Underwater Vehicle

Heininen, A., Aaltonen, J. & Koskinen, K. T., 9 Oct 2017, Proceedings of the 2nd Annual SMACC Research Seminar 2017. Aaltonen, J., Virkkunen, R., Koskinen, K. T. & Kuivanen, R. (eds.). Tampere: Tampere University of Technology, Vol. 2. p. 53-56 4 p. 14

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

Slurry and dry particle erosion wear properties of WC-10Co4Cr and Cr3C2-25NiCr hardmetal coatings deposited by HVOF and HVAF spray processes

Matikainen, V., Rubio Peregrina, S., Ojala, N., Koivuluoto, H., Schubert, J., Houdková & Vuoristo, P., 2019, In : Tribologia. 36, 1-2, p. 58-61 4 p.

Research output: Contribution to journalArticleScientific

Smart Skins: Could they be the ultimate sensing tool? Today\uFFFDs industry and personal medical care both strongly demand accurate, reliable, robust, lo

Le, T., Lin, Z., Wong, C. P. & Tentzeris, M. M., 1 Jun 2015, In : IEEE Nanotechnology Magazine. 9, 2, p. 4-10 7 p., 7080864.

Research output: Contribution to journalArticleScientificpeer-review

Solar Panel Breakage During Heavy Rain Caused by Thermal Stress

Mikkonen, A. & Karvinen, R., Oct 2016, Engineered Transparency 2016: Glass in Architechture and Structural Engineering. Wiley

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Solvothermal synthesis derived Co-Ga codoped ZnO diluted magnetic degenerated semiconductor nanocrystals

Šutka, A., Käämbre, T., Joost, U., Kooser, K., Kook, M., Duarte, R. F., Kisand, V., Maiorov, M., Döbelin, N. & Smits, K., 30 Sep 2018, In : Journal of Alloys and Compounds. 763, p. 164-172 9 p.

Research output: Contribution to journalArticleScientificpeer-review

Special Issue: From Responsive Materials to Interactive Materials

Priimägi, A. (ed.) & Hecht, S. (ed.), 2020, In : Advanced Materials. 32, 20

Research output: Contribution to journalSpecial issueScientificpeer-review

Spodumene tailings for porcelain and structural materials: Effect of temperature (1050–1200 °C) on the sintering and properties

Lemougna, P. N., Yliniemi, J., Ismailov, A., Levänen, E., Tanskanen, P., Kinnunen, P., Roning, J. & Illikainen, M., 2019, (Accepted/In press) In : Minerals Engineering. 105843.

Research output: Contribution to journalArticleScientificpeer-review

Spontaneous formation of three-dimensionally ordered Bi-rich nanostructures within GaAs1-xBix/GaAs quantum wells

Luna, E., Wu, M., Hanke, M., Puustinen, J., Guina, M. & Trampert, A., 1 Jul 2016, In : Nanotechnology. 27, 32, 325603.

Research output: Contribution to journalArticleScientificpeer-review

Stable and unstable friction in fretting contacts

Hintikka, J., Mäntylä, A., Vaara, J., Frondelius, T. & Lehtovaara, A., 1 Mar 2019, In : Tribology International. 131, p. 73-82 10 p.

Research output: Contribution to journalArticleScientificpeer-review

Static friction measurements on steel against uncoated and coated cast iron

Andersson, P., Kilpi, L., Holmberg, K., Vaajoki, A. & Oksanen, V., 1 Jan 2016, In : Tribologia. 34, 1-2, p. 5-40 36 p.

Research output: Contribution to journalArticleScientificpeer-review

Statistical analysis of E-jet print parameter effects on Ag-nanoparticle ink droplet size

Laurila, M. M., Khorramdel, B., Dastpak, A. & Mäntysalo, M., 2 Aug 2017, In : Journal of Micromechanics and Microengineering. 27, 9, 095005.

Research output: Contribution to journalArticleScientificpeer-review

Statistical modeling of water vapor transmission rates for extrusion-coated papers

Lahtinen, K. & Kuusipalo, J., 2008, TAPPI 2008 PLACE Conference: Innovations in Flexible Consumer Packaging.

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Structures and properties of laser-assisted cold-sprayed aluminum coatings

Koivuluoto, H., Milanti, A., Bolelli, G., Latokartano, J., Marra, F., Pulci, G., Vihinen, J., Lusvarghi, L. & Vuoristo, P., 2017, THERMEC 2016. Trans Tech Publications Ltd, Vol. 879. p. 984-989 6 p. (Materials Science Forum; vol. 879).

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Superhydrophobic Coatings on Cellulose-Based Materials: Fabrication, Properties, and Applications

Teisala, H., Tuominen, M. & Kuusipalo, J., 1 Feb 2014, In : Advanced Materials Interfaces. 1, 1, p. 1-20 20 p., 1300026.

Research output: Contribution to journalReview ArticleScientificpeer-review

Synchronous Full-Field Strain and Temperature Measurement in Tensile Tests at Low, Intermediate and High Strain Rates

Seidt, J. D., Kuokkala, V-T., Smith, J. L. & Gilat, A., Feb 2017, In : Experimental Mechanics. 57, 2, p. 219–229

Research output: Contribution to journalArticleScientificpeer-review

Syndecan-4 tunes cell mechanics by activating the kindlin-integrin-RhoA pathway

Chronopoulos, A., Thorpe, S. D., Cortes, E., Lachowski, D., Rice, A. J., Mykuliak, V. V., Rog, T., Lee, D. A., Hytönen, V. P. & del Río Hernández, A. E., 2020, In : Nature Materials. 15 p.

Research output: Contribution to journalArticleScientificpeer-review

Tailoring Second-Harmonic Emission from (111)-GaAs Nanoantennas

Sautter, J. D., Xu, L., Miroshnichenko, A. E., Lysevych, M., Volkovskaya, I., Smirnova, D. A., Camacho-Morales, R., Zangeneh Kamali, K., Karouta, F., Vora, K., Tan, H. H., Kauranen, M., Staude, I., Jagadish, C., Neshev, D. N. & Rahmani, M., 12 Jun 2019, In : Nano Letters. 19, 6, p. 3905-3911 7 p.

Research output: Contribution to journalArticleScientificpeer-review

Tampere University of Technology, laboratory of materials science, paper converting and packaging technology Tampere, Finland

Kuusipalo, J. & Lahti, J., 1 Jan 2017, 16th TAPPI European PLACE Conference 2017: Basel; Switzerland; 22 May 2017 through 24 May 2017. TAPPI Press, Vol. May-2017. 1 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Techno-economic evaluation of integrating torrefaction with anaerobic digestion

Doddapaneni, T. R. K. C., Praveenkumar, R., Tolvanen, H., Rintala, J. & Konttinen, J., 2018, In : Applied Energy. 213, p. 272-284 13 p.

Research output: Contribution to journalArticleScientificpeer-review

The correlation between gear contact friction and ball on disc friction measurements

Björling, M., Miettinen, J., Marklund, P., Lehtovaara, A. & Larsson, R., 2015, In : Tribology International. 83, p. 114-119 6 p.

Research output: Contribution to journalArticleScientificpeer-review

The deformation, strain hardening, and wear behavior of chromium-alloyed hadfield steel in abrasive and impact conditions

Lindroos, M., Apostol, M., Heino, V., Valtonen, K., Laukkanen, A., Holmberg, K. & Kuokkala, V. T., 2015, In : Tribology Letters. 57, 3, 24.

Research output: Contribution to journalArticleScientificpeer-review

The effect of initial microstructure on the final properties of press hardened 22MnB5 steels

Järvinen, H., Isakov, M., Nyyssönen, T., Järvenpää, M. & Peura, P., 31 Oct 2016, In : Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing. 676, p. 109-120 12 p.

Research output: Contribution to journalArticleScientificpeer-review

The effect of phosphorous and arsenic on the fracture behaviour of a 2,25% Cr-1% Mo Steel

Lorimer, G. W., Dicken, R., Peura, P., Pilkington, R., Younes, C. M., Allen, G. C. & Holt, M. J., 1 Dec 1996, In : Materials Science Forum. 207-209, PART 2, p. 645-648 4 p.

Research output: Contribution to journalArticleScientificpeer-review

The effects of corona and flame treatment: Part 2. PE-HD and PP coated papers

Lahti, J., Tuominen, M., Penttinen, T., Räsänen, J. P. & Kuusipalo, J., 2009, TAPPI Press - 12th European PLACE Conference 2009. Vol. 1. p. 278-314 37 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

The formation and characterization of fretting-induced degradation layers using quenched and tempered steel

Nurmi, V., Hintikka, J., Juoksukangas, J., Honkanen, M., Vippola, M., Lehtovaara, A., Mäntylä, A., Vaara, J. & Frondelius, T., 1 Mar 2019, In : Tribology International. 131, p. 258-267 10 p.

Research output: Contribution to journalArticleScientificpeer-review

The potential of electric trucks – An international commodity-level analysis

Liimatainen, H., van Vliet, O. & Aplyn, D., 15 Feb 2019, In : Applied Energy. 236, p. 804-814 11 p.

Research output: Contribution to journalArticleScientificpeer-review

Thermal, structural and in vitro dissolution of antimicrobial copper-doped and slow resorbable iron-doped phosphate glasses

Mishra, A., Petit, L., Pihl, M., Andersson, M., Salminen, T., Rocherullé, J. & Massera, J., 2017, In : Journal of Materials Science. 52, 15, p. 8957–8972 16 p.

Research output: Contribution to journalArticleScientificpeer-review

The role of niobium in improving toughness and corrosion resistance of high speed steel laser hardfacings

Rodríguez Ripoll, M., Ojala, N., Katsich, C., Totolin, V., Tomastik, C. & Hradil, K., 5 Jun 2016, In : Materials and Design. 99, p. 509-520 12 p.

Research output: Contribution to journalArticleScientificpeer-review

Third Particle Ejection Effects on Wear with Quenched and Tempered Steel Fretting Contact

Hintikka, J., Lehtovaara, A. & Mäntylä, A., 2017, In : TRIBOLOGY TRANSACTIONS. 60, 1, p. 70-78 9 p.

Research output: Contribution to journalArticleScientificpeer-review

TOpti: a flexible framework for optimising energy management for various ship machinery topologies

Jaurola, M., Hedin, A., Tikkanen, S. & Huhtala, K., 2018, In : Journal of Marine Science and Technology (Japan).

Research output: Contribution to journalArticleScientificpeer-review

Towards an approach for evaluating the quality of requirements

Mokammel, F., Coatanea, E., Christophe, F., Ba Khouya, M. & Medyna, G., 2013, 33rd Computers and Information in Engineering Conference. American Society of Mechanical Engineers, Vol. 2 B. V02BT02A024

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Towards dependable automation

Seppälä, J. & Salmenperä, M., 2015, Cyber Security: Analytics, Technology and Automation: Part IV. Springer International Publishing, p. 229-249 21 p. (Intelligent Systems, Control and Automation: Science and Engineering; vol. 78).

Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

Toward the Atomically Abrupt Interfaces of SiOx/Semiconductor Junctions

Kuzmin, M., Laukkanen, P., Mäkelä, J., Yasir, M., Tuominen, M., Dahl, J., Punkkinen, M. P. J., Kokko, K., Hedman, H. P., Moon, J., Punkkinen, R., Lastusaari, M., Polojärvi, V., Korpijärvi, V-M. & Guina, M., Jun 2016, In : Advanced Materials Interfaces. 3, 11, 1500510.

Research output: Contribution to journalArticleScientificpeer-review

Transfer printing of metallic microstructures on adhesion-promoting hydrogel substrates

Wu, H., Sariola, V., Zhu, C., Zhao, J., Sitti, M. & Bettinger, C. J., 1 Jun 2015, In : Advanced Materials. 27, 22, p. 3398-3404 7 p.

Research output: Contribution to journalArticleScientificpeer-review

Transparent microelectrode arrays fabricated by ion beam assisted deposition for neuronal cell in vitro recordings

Ryynänen, T., Mzezewa, R., Meriläinen, E., Hyvärinen, T., Lekkala, J., Narkilahti, S. & Kallio, P., 1 May 2020, In : Micromachines. 11, 5, 497.

Research output: Contribution to journalArticleScientificpeer-review

Tribocorrosion behaviour of tin bronze CuSn12 under a sliding motion in NaCl containing environment: Contact to inert vs. reactive counterbody

Huttunen-Saarivirta, E., Kilpi, L., Pasanen, A. T., Salminen, T. & Ronkainen, H., 1 Nov 2020, In : Tribology International. 151, 106389.

Research output: Contribution to journalArticleScientificpeer-review

Tribocorrosion behaviour of two low-alloy steel grades in simulated waste solution

Mäntyranta, A., Heino, V., Isotahdon, E., Salminen, T. & Huttunen-Saarivirta, E., 1 Oct 2019, In : Tribology International. 138, p. 250-262 13 p.

Research output: Contribution to journalArticleScientificpeer-review

Ultrafast Processing of Hierarchical Nanotexture for a Transparent Superamphiphobic Coating with Extremely Low Roll-Off Angle and High Impalement Pressure

Teisala, H., Geyer, F., Haapanen, J., Juuti, P., Mäkelä, J. M., Vollmer, D. & Butt, H. J., 2018, In : Advanced Materials. 30, 14, 1706529.

Research output: Contribution to journalArticleScientificpeer-review

Vapor Phase Fabrication of Nanoheterostructures Based on ZnO for Photoelectrochemical Water Splitting

Barreca, D., Carraro, G., Gasparotto, A., Maccato, C., Altantzis, T., Sada, C., Kaunisto, K., Ruoko, T-P. & Bals, S., 2017, In : Advanced Materials Interfaces. 4, 18, 1700161.

Research output: Contribution to journalArticleScientificpeer-review

Variable speed digital hydraulic transformer–based servo drive

Linjama, M., 2019, In : Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering.

Research output: Contribution to journalArticleScientificpeer-review

Variable speed drive with hydraulic boost

Linjama, M., 2019, In : International Journal of Fluid Power. 20, 1, p. 99-123 25 p.

Research output: Contribution to journalArticleScientificpeer-review

Vehicle type detection and passenger satisfaction analysis using smartphone sensors and digital surveys

Perttula, A., Nguyen, N., Collin, J. & Jokinen, J-P., 1 Oct 2019, In : IET Intelligent Transport Systems. 13, 10, p. 1499-1506 8 p.

Research output: Contribution to journalArticleScientificpeer-review

Viewpoint: Pavlovian Materials—Functional Biomimetics Inspired by Classical Conditioning

Zhang, H., Zeng, H., Priimägi, A. & Ikkala, O., 2020, In : Advanced Materials. 9 p., 1906619.

Research output: Contribution to journalArticleScientificpeer-review

Waves in hyperbolic and double negative metamaterials including rogues and solitons

Boardman, A. D., Alberucci, A., Assanto, G., Grimalsky, V. V., Kibler, B., McNiff, J., Nefedov, I. S., Rapoport, Y. G. & Valagiannopoulos, C. A., 9 Oct 2017, In : Nanotechnology. 28, 44, 444001.

Research output: Contribution to journalReview ArticleScientificpeer-review

Wear and impact behaviour of High Velocity Air-Fuel sprayed Fe-Cr-Ni-B-C alloy coatings

Bolelli, G., Milanti, A., Lusvarghi, L., Trombi, L., Koivuluoto, H. & Vuoristo, P., 2016, In : Tribology International. 95, p. 372-390

Research output: Contribution to journalArticleScientificpeer-review