Ab initio study of the surface properties of austenitic stainless steel alloys

Abrasion and compression resistance of liquid-flame-spray-deposited functional nanoparticle coatings on paper

Abrasive-Erosive Wear of Thermally Sprayed Coatings from Experimental and Commercial Cr3C2-Based Powders

Accurate Binding of Sodium and Calcium to a POPC Bilayer by Effective Inclusion of Electronic Polarization

Accurate description of aqueous carbonate ions

An effective polarization model verified by neutron scattering

Accurate description of calcium solvation in concentrated aqueous solutions

A comparison of rheology and FTIR in the study of polypropylene and polystyrene photodegradation

Additive manufacturing of monolithic supercapacitors with biopolymer separator

A Finite Cluster Approach to the Electron-Hole Pair Damping of the Adsorbate Vibration

CO Adsorbed on Cu(100)

Aligned Poly(ε-caprolactone) Nanofibers Guide the Orientation and Migration of Human Pluripotent Stem Cell-Derived Neurons, Astrocytes, and Oligodendrocyte Precursor Cells In Vitro

Analysis of GaAsBi growth regimes in high resolution with respect to As/Ga ratio using stationary MBE growth

A novel thermotropic elastomer based on highly-filled LDH-SSB composites

Antibacterial polymer fibres by rosin compounding and melt-spinning

Aqueous guanidinium-carbonate interactions by molecular dynamics and neutron scattering

Relevance to ion-protein interactions

Arc-sprayed Fe-based coatings from coredwires for wear and corrosion protection in power engineering

Are coarse-grained models apt to detect protein thermal stability? the case of OPEP force field

Aryl end-capped quaterthiophenes applied as anode interfacial layers in inverted organic solar cells

A study of Cr3C2-based HVOF- and HVAF-sprayed coatings

Abrasion, dry particle erosion and cavitation erosion resistance

A Study of Cr3C2-Based HVOF- and HVAF-Sprayed Coatings

Microstructure and Carbide Retention

A study of electric transport in n- and p-type modulation-doped GaInNAs/GaAs quantum well structures under a high electric field

A supramolecular approach to photoresponsive thermo/solvoplastic block copolymer elastomers

Azobenzene photomechanics

Prospects and potential applications

Azopolymer-based micro- and nanopatterning for photonic applications

Barkhausen noise response of three different welded duplex stainless steels

Behavior of 4-hydroxynonenal in phospholipid membranes

Better understanding of the role of SiO2, P2O5 and Al2O3 on the spectroscopic properties of Yb3+ doped silica sol-gel glasses

Biomimetic surface modification of polycarbonateurethane film via phosphorylcholine-graft for resisting platelet adhesion

Biomimetic zinc chlorin-poly(4-vinylpyridine) assemblies

Doping level dependent emission-absorption regimes

Block copolymer lithography

Feature size control and extension by an over-etch technique

Both zundel and eigen isomers contribute to the IR spectrum of the gas-phase H9O4 + cluster

Calculated electronic density of states and structural properties of tetrahedral amorphous carbon

Carbon nanotubes-filled thermoplastic polyurethane-urea and carboxylated acrylonitrile butadiene rubber blend nanocomposites

Cation-specific effects on enzymatic catalysis driven by interactions at the tunnel mouth

Characterization of High-Velocity Single Particle Impacts on Plasma-Sprayed Ceramic Coatings

Characterization of Powder-Precursor HVOF-Sprayed Al2O3-YSZ/ZrO2 Coatings

Characterization of the microstructure and corrosion performance of Ce-alloyed Nd-Fe-B magnets

Characterization of thermally aged polyetheretherketone fibres

Mechanical, thermal, rheological and chemical property changes

Characterizing the micro-impact fatigue behavior of APS and HVOF-sprayed ceramic coatings

Chemical and bacterial leaching of metals from a smelter slag in acid solutions

Chemical synthesis of WC-Co from water-soluble precursors

The effect of carbon and cobalt additions to WC synthesis

Cold gas spraying of a high-entropy CrFeNiMn equiatomic alloy

Cold-Sprayed Al6061 coatings

Online spray monitoring and influence of process parameters on coating properties

Comparison of laboratory rolling-sliding wear tests with in-service wear of nodular cast iron rollers against wire ropes

Comparison of various high-stress wear conditions and wear performance of martensitic steels

Compatibilization of natural rubber/nitrile rubber blends by sol–gel nano-silica generated by in situ method

Compounding and characterization of recycled multilayer plastic films

Configurational Disorder of Water Hydrogen-Bond Network at the Protein Dynamical Transition

Convenient extraction method for quantification of thin zinc patina layers

Corrosion mechanisms of sintered Nd-Fe-B magnets in the presence of water as vapour, pressurised vapour and liquid

Corrosion properties of thermally sprayed bond coatings under plasma sprayed chromia coating in sulfuric acid solutions

Crystallization mechanism of the bioactive glasses, 45S5 and S53P4

Cysteine-tagged chimeric avidin forms high binding capacity layers directly on gold

Damage mechanisms and cracking behavior of thermal sprayed WC-CoCr coating under scratch testing

Design, processing, and characterization of an optical core-bioactive clad phosphate fiber for biomedical applications

Detection of 3,4-methylenedioxymethamphetamine (MDMA, ecstasy) by displacement of antibodies

Detection of gaseous species during KCl-induced high-temperature corrosion by the means of CPFAAS and CI-APi-TOF

Detergent impurity effect on recycled HDPE

Properties after repetitive processing

Development and application of HVOF sprayed spinel protective coating for SOFC interconnects

DFT simulations and microkinetic modelling of 1-pentyne hydrogenation on Cu20 model catalysts

Dielectric Breakdown Strength of Thermally Sprayed Ceramic Coatings

Effects of Different Test Arrangements

Dissolution behavior of the bioactive glass S53P4 when sodium is replaced by potassium, and calcium with magnesium or strontium

DNA lesion can facilitate base ionization

Vertical ionization energies of aqueous 8-oxoguanine and its nucleoside and nucleotide

Effect of head group size on the photoswitching applications of azobenzene Disperse Red 1 analogues

Effect of heat-treatment on the upconversion of NaYF4:Yb3+, Er3+ nanocrystals containing silver phosphate glass

Effect of incorporation of CdS NPs on performance of PTB7

PCBM organic solar cells

Effect of melting state on the thermal shock resistance and thermal conductivity of APS ZrO2-7.5wt.% Y2O3 coatings

Effect of non-rubber components of NR on the carbon nanotube (CNT) localization in SBR/NR blends

Effect of nozzle geometry on the microstructure and properties of hvaf-sprayed wc-10co4cr and cr3c2-25nicr coatings

Effect of Phosphatidic Acid on Biomembrane

Experimental and Molecular Dynamics Simulations Study

Effect of prior austenite grain size on the abrasive wear resistance of ultra-high strength martensitic steels

Effect of rheological properties of dissolved cellulose/microfibrillated cellulose blend suspensions on film forming

Effect of rubber polarity on selective wetting of carbon nanotubes in ternary blends

Effect of silane integrated sol-gel derived in situ silica on the properties of nitrile rubber

Effect of sol-gel derived in situ silica on the morphology and mechanical behavior of natural rubber and acrylonitrile butadiene rubber blends

Effect of spraying parameters on the microstructural and corrosion properties of HVAF-sprayed Fe-Cr-Ni-B-C coatings

Effect of surface morphology of poly(ïμ-caprolactone) scaffolds on adipose stem cell adhesion and proliferation

Effect of tempering on the impact-abrasive and abrasive wear resistance of ultra-high strength steels

Effect of the addition of Al2O3, TiO2 and ZnO on the thermal, structural and luminescence properties of Er3+-doped phosphate glasses

Effects of composition and microstructure on the abrasive wear performance of quenched wear resistant steels

Efficient photon upconversion at remarkably low annihilator concentrations in a liquid polymer matrix: when less is more

Efficient surface structuring and photoalignment of supramolecular polymer-azobenzene complexes through rational chromophore design

Elastomer composites based on carbon nanotubes and ionic liquid

Electromagnetic interference shielding effectiveness of MWCNT filled poly(ether sulfone) and poly(ether imide) nanocomposites

Electromagnetic nonlinearities in a Roebel-cable-based accelerator magnet prototype

Variational approach

Electronic transport in n-type modulation-doped AlGaAs/GaAsBi quantum well structures

Influence of Bi and thermal annealing on electron effective mass and electron mobility

Energetic origin of proton affinity to the air/water interface

Enhanced thermal stability of polychloroprene rubber composites with ionic liquid modified MWCNTs

Entrapped Styrene Butadiene Polymer Chains by Sol-Gel-Derived Silica Nanoparticles with Hierarchical Raspberry Structures

Epitaxial phases of high Bi content GaSbBi alloys

Equipment for obtaining polimeric nanofibres by electrospinning technology

II. The obtaining of polimeric nanofibers

Erosion–corrosion resistance of various stainless steel grades in high-temperature sulfuric acid solution

Erosion wear of vinylester matrix composites in aqueous and acidic environments at elevated temperatures

Erosion wear performance of WC-10Co4Cr and Cr3C2-25NiCr coatings sprayed with high-velocity thermal spray processes

Erosive wear of filled vinylester composites in water and acidic media at elevated temperature

Erosive wear of various stainless steel grades used as impeller blade materials in high temperature aqueous slurry

Evaluating the toughness of APS and HVOF-sprayed Al2O3-ZrO2-coatings by in-situ- and macroscopic bending

Evaluation of crushing strength of spray-dried MgAl2O4 granule beds

Evaluation of Residual Stresses and Their Influence on Cavitation Erosion Resistance of High Kinetic HVOF and HVAF-Sprayed WC-CoCr Coatings

Exciton localization and structural disorder of GaAs1-xBix/GaAs quantum wells grown by molecular beam epitaxy on (311)B GaAs substrates

Exploring the role of stearic acid in modified zinc aluminum layered double hydroxides and their acrylonitrile butadiene rubber nanocomposites

Fabrication and Characterization of Amorphous Alumina-Yttria-Stabilized Zirconia Coatings by Air Plasma Spraying

First principles prediction of the solar cell efficiency of chalcopyrite materials  AgMX2(M=In, Al; X=S, Se, Te)

Flip-chip Wafer-fused OP-VECSELs emitting 3.65 W at the 1.55-μm waveband

Fluorimetric oxygen sensor with an efficient optical read-out for in vitro cell models

Fluorine losses in Er3+oxyfluoride phosphate glasses and glass-ceramics

Formation mechanisms, structure, and properties of HVOF-sprayed WC-CoCr coatings

An approach toward process maps

Gas atomized thermal spray powders of various metals and alloys

Guanidinium Pairing Facilitates Membrane Translocation

Halogen bonding stabilizes a cis-azobenzene derivative in the solid state

A crystallographic study

Hierarchical Self-Assembly of Halogen-Bonded Block Copolymer Complexes into Upright Cylindrical Domains

Highly conducting polychloroprene composites based on multi-walled carbon nanotubes and 1-butyl 3-methyl imidazolium bis(trifluoromethylsulphonyl)imide

Highly exfoliated natural rubber/Clay composites by "propping-open procedure"

The influence of fatty-acid chain length on exfoliation

High-performance elastomeric strain sensors based on nanostructured carbon fillers for potential tire applications

High temperature corrosion of thermally sprayed NiCr and FeCr coatings covered with a KCl-K2SO4 salt mixture

How conformational flexibility stabilizes the hyperthermophilic elongation factor G-domain

How well can we predict cluster fragmentation inside a mass spectrometer?

Human adipose stem cells in chondrogenic differentiation medium without growth factors differentiate towards annulus fibrosus phenotype in vitro

HVOF- and HVAF-Sprayed Cr3C2-NiCr Coatings Deposited from Feedstock Powders of Spherical Morphology

Microstructure Formation and High-Stress Abrasive Wear Resistance Up to 800 °C

HVOF process control enabling strategies

Hybrid nanoparticle design based on cationized gelatin and the polyanions dextran sulfate and chondroitin sulfate for ocular gene therapy

Hydration of hydroxyl and amino groups examined by molecular dynamics and neutron scattering

Hydrolysis and drug release from poly(ethylene glycol)-modified lactone polymers with open porosity

Immobilized bioactive agents onto polyurethane surface with heparin and phosphorylcholine group

Improved electromechanical response in acrylic rubber by different carbon-based fillers

Improved properties for packaging materials by nanoscale surface modification and ALD barrier coating

Improved Stability of Atomic Layer Deposited Amorphous TiO2 Photoelectrode Coatings by Thermally Induced Oxygen Defects

Improvement of actuation performance of dielectric elastomers by barium titanate and carbon black fillers

Improving the high temperature abrasion resistance of thermally sprayed Cr3C2-NiCr coatings by WC addition

Increased lifetime for biomass and waste to energy power plant boilers with HVOF coatings

High temperature corrosion testing under chlorine-containing molten salt

Influence of heat treatment on the abrasive wear resistance of a Cr3C2NiCr coating deposited by an ethene-fuelled HVOF spray process

Influence of ionic liquids on the dielectric relaxation behavior of CNT based elastomer nanocomposites

Influence of powder properties on residual stresses formed in high-pressure liquid fuel HVOF sprayed WC-CoCr coatings

Influence of the phosphate glass melt on the corrosion of functional particles occurring during the preparation of glass-ceramics

Influence of the Spray Gun Type on Microstructure and Properties of HVAF Sprayed Fe-Based Corrosion Resistant Coatings

Infrared Thermography as a Non-destructive Testing Solution for Thermal Spray Metal Coatings

In Situ Photocontrol of Block Copolymer Morphology during Dip-Coating of Thin Films

Investigation of long-term chemical stability of structured ZnO films in aqueous solutions of varying conditions

Ionization of purine tautomers in nucleobases, nucleosides, and nucleotides

From the gas phase to the aqueous environment

Load capacity of lubricated bismuth bronze bimetal bearing under elliptical sliding motion

Location of the Azobenzene moieties within the cross-linked liquid-crystalline polymers can dictate the direction of photoinduced bending

Low-dimensional formamidinium lead perovskite architectures via controllable solvent intercalation

Luminescence of Er3+ doped oxyfluoride phosphate glasses and glass-ceramics

Measuring optical anisotropy in poly(3,4-ethylene dioxythiophene)

poly(styrene sulfonate) films with added graphene

Mechanical characterization of pore-graded bioactive glass scaffolds produced by robocasting

Mechanical performance and CO2 uptake of ion-exchanged zeolite A structured by freeze-casting

Mechanical, thermal, and burning properties of viscose fabric composites

Influence of epoxy resin modification

Membrane bound COMT isoform is an interfacial enzyme

General mechanism and new drug design paradigm

Microphase mechanism of "superquenching" of luminescent probes in aqueous solutions of DNA and some other polyelectrolytes

Microstructural and abrasion wear characteristics of laser-clad tool steel coatings

Microstructure and Sliding Wear Behavior of Fe-Based Coatings Manufactured with HVOF and HVAF Thermal Spray Processes

Mining tailings as raw materials for reaction-sintered aluminosilicate ceramics

Effect of mineralogical composition on microstructure and properties

Modelling thermodynamics in a high erature superconducting dipole magnet

An inverse problem based approach

Modification of epoxy resin by silane-coupling agent to improve tensile properties of viscose fabric composites

Molecular Design of Light-Responsive Hydrogels, for in Situ Generation of Fast and Reversible Valves for Microfluidic Applications

Nanoindentation study of light-induced softening of supramolecular and covalently functionalized azo polymers

Naturally occurring amino acids

A suitable substitute of N-N/-di-phenyl guanidine (DPG) in silica tyre formulation?

Near-threshold high spin amplification in a 1300 nm GaInNAs spin laser

Non-destructive and wireless monitoring of biodegradable polymers

Nonlinear Optical Properties of Fluorescent Dyes Allow for Accurate Determination of Their Molecular Orientations in Phospholipid Membranes

Novel borosilicate bioactive scaffolds with persistent luminescence

Novel Online Diagnostic Analysis for In-Flight Particle Properties in Cold Spraying

Novel oxyfluorophosphate glasses and glass-ceramics

Optical properties of GaAs1-xBix/GaAs quantum well structures grown by molecular beam epitaxy on (100) and (311)B GaAs substrates

Optimised selection of new protective coatings for biofuel boiler applications

Optimization of HVOF Cr3C2-NiCr coating for increased fatigue performance

Orientational dependence of the affinity of guanidinium ions to the water surface

Ortho-Fluorination of azophenols increases the mesophase stability of photoresponsive hydrogen-bonded liquid crystals

Oxidation of cholesterol does not alter significantly its uptake into high-density lipoprotein particles

Oxygen and water vapor transmission rates of starch-poly(vinyl alcohol) barrier coatings for flexible packaging paper

Passive resonance sensor based method for monitoring particle suspensions

PEGylated liposomes as carriers of hydrophobic porphyrins

Perfluoro-1,1′-biphenyl and perfluoronaphthalene and their derivatives as π-acceptors for anions

Performance testing of iron based thermally sprayed HVOF coatings in a biomass-fired fluidised bed boiler

Persistent luminescent particles containing bioactive glasses

Prospect toward tracking in-vivo implant mineralization using biophotonic ceramics

Phase-change material

Natural rubber composites for heat storage applications

Phenothiazine and carbazole substituted pyrene based electroluminescent organic semiconductors for OLED devices

Photocatalytic and antibacterial properties of ZnO films with different surface topographies on stainless steel substrate

Photomechanical Energy Transfer to Photopassive Polymers through Hydrogen and Halogen Bonds

Photoresponsive liquid-crystalline polymer films bilayered with an inverse opal structure

Photostable orange-red fluorescent unsymmetrical diketopyrrolopyrrole-BF2hybrids

PIP2 and Talin Join Forces to Activate Integrin

Polyarginine Interacts More Strongly and Cooperatively than Polylysine with Phospholipid Bilayers

Polymer looping is controlled by macromolecular crowding, spatial confinement, and chain stiffness

Porous polybutylene succinate films enabling adhesion of human embryonic stem cell-derived retinal pigment epithelial cells (hESC-RPE)

Post operation inactivation of acidophilic bioleaching microorganisms using natural chloride-rich mine water

Powering of an HTS dipole insert-magnet operated standalone in helium gas between 5 and 85 K

Preintercalation of an organic accelerator into nanogalleries and preparation of ethylene propylene diene terpolymer rubber-clay nanocomposites

Preparation of zinc oxide free, transparent rubber nanocomposites using a layered double hydroxide filler

Printable and flexible macroporous organosilica film with high protein adsorption capacity

Processable aromatic polyesters based on bisphenol derived from cashew nut shell liquid

synthesis and characterization

Processing and characterization of phosphate glasses containing CaAl2O4:Eu2+,Nd3+ and SrAl2O4:Eu2+,Dy3+ microparticles

Process Parameter Impact on Suspension-HVOF-Sprayed Cr2O3 Coatings

Process time importance in the product properties evolvement during extrusion coating of different LDPE grades

Production of sulfonated polyetheretherketone/polypropylene fibers for photoactive textiles

Proliferation and differentiation of adipose stem cells towards smooth muscle cells on poly(trimethylene carbonate) membranes

Properties of HVOF-sprayed Stellite-6 coatings

Quench absorption coils

A quench protection concept for high-field superconducting accelerator magnets

Rapid and sensitive detection of norovirus antibodies in human serum with a biolayer interferometry biosensor

Rapid, Brushless Self-assembly of a PS-b-PDMS Block Copolymer for Nanolithography

Recent progress in biohydrometallurgy and microbial characterisation

Recent twists in photoactuation and photoalignment control

Reinforced chloroprene rubber by in situ generated silica particles

Evidence of bound rubber on the silica surface

Release of halide ions from the buried active site of the haloalkane dehalogenase LinB revealed by stopped-flow fluorescence analysis and free energy calculations

Reversal of the hofmeister series

Specific ion effects on peptides

Reversible photodoping of TiO2 nanoparticles

Role of fracture toughness in impact-abrasion wear

Role of Internal Water on Protein Thermal Stability

The Case of Homologous G Domains

Rotational Diffusion of Membrane Proteins in Crowded Membranes

Self-assembly of polystyrene-block-poly(4-vinylpyridine) block copolymer on molecularly functionalized silicon substrates

Fabrication of inorganic nanostructured etchmask for lithographic use

Simultaneous removal of tetrathionate and copper from simulated acidic mining water in bioelectrochemical and electrochemical systems

Sliding and abrasive wear behaviour of HVOF- and HVAF-sprayed Cr3C2-NiCr hardmetal coatings

Sliding wear behaviour of HVOF and HVAF sprayed Cr3C2-based coatings

Soft hydrazone crosslinked hyaluronan- and alginate-based hydrogels as 3D supportive matrices for human pluripotent stem cell-derived neuronal cells

Solvent Welding and Imprinting Cellulose Nanofiber Films Using Ionic Liquids

Solvothermal synthesis derived Co-Ga codoped ZnO diluted magnetic degenerated semiconductor nanocrystals

Spectroscopic study of a DNA brush synthesized in situ by surface initiated enzymatic polymerization

Stability and Function at High Temperature. What Makes a Thermophilic GTPase Different from Its Mesophilic Homologue

Stable blue phase polymeric Langmuir-Schaefer films based on unsymmetrical hydroxyalkadiynyl N-arylcarbamate derivatives

Starch-poly(vinyl alcohol) barrier coatings for flexible packaging paper and their effects of phase interactions

Stearate Modified Zinc-Aluminum Layered Double Hydroxides and Acrylonitrile Butadiene Rubber Nanocomposites

Stimuli-responsive photonic polymer coatings

Structurally Controlled Dynamics in Azobenzene-Based Supramolecular Self-Assemblies in Solid State

Structure and Dynamics of Thermosensitive pDNA Polyplexes Studied by Time-Resolved Fluorescence Spectroscopy

Structure and in vitro dissolution of Mg and Sr containing borosilicate bioactive glasses for bone tissue engineering

Sulfonated polyetheretherketone/polypropylene polymer blends for the production of photoactive materials

Supercritical carbon dioxide treatment of hot dip galvanized steel as a surface treatment before coating

Supramolecular design principles for efficient photoresponsive polymer-azobenzene complexes

Supramolecular hierarchy among halogen and hydrogen bond donors in light-induced surface patterning

Surface behavior of hydrated guanidinium and ammonium ions

A comparative study by photoelectron spectroscopy and molecular dynamics

Synthesis and Photophysical Properties of Two Diazaporphyrin-Porphyrin Hetero Dimers in Polar and Nonpolar Solutions

Systematic analysis of coating-substrate interactions in the presence of flow localization

Temperature scanning stress relaxation behavior of water responsive and mechanically adaptive elastomer nanocomposites

The 5th international workshop on numerical modelling of high temperature superconductors

The effect of carbon and nickel additions on the precursor synthesis of Cr3C2-Ni nanopowder

The effect of impact conditions on the wear and deformation behavior of wear resistant steels

The effects of laser patterning 10CeTZP-Al2O3 nanocomposite disc surfaces

Osseous differentiation and cellular arrangement in vitro

The effects of UV irradiation to polyetheretherketone fibres

Characterization by different techniques

The red, purple and blue modifications of polymeric unsymmetrical hydroxyalkadiynyl-N-arylcarbamate derivatives in Langmuir-Schaefer films

Thermal Isomerization of Hydroxyazobenzenes as a Platform for Vapor Sensing

Thermally evaporated single-crystal Germanium on Silicon

Thermal, structural and optical properties of Er3+ doped phosphate glasses containing silver nanoparticles

Time-Resolved Fluorescence Spectroscopy Reveals Fine Structure and Dynamics of Poly(l-lysine) and Polyethylenimine Based DNA Polyplexes

Towards universal enrichment nanocoating for IR-ATR waveguides

Transforming anion instability into stability

Contrasting photoionization of three protonation forms of the phosphate ion upon moving into water

Transparent Yb3+ doped phosphate glass-ceramics

Tribology of FeVCrC coatings deposited by HVOF and HVAF thermal spray processes

Tribology of HVOF- and HVAF-sprayed WC-10Co4Cr hardmetal coatings

A comparative assessment

Two cations, two mechanisms

Interactions of sodium and calcium with zwitterionic lipid membranes

Ultrafast Photochemistry of the [Cr(NCS)6]3- Complex in Dimethyl Sulfoxide and Dimethylformamide upon Excitation into Ligand-Field Electronic State

Unintentional boron contamination of MBE-grown GaInP/AlGaInP quantum wells

Unmodified LDH as reinforcing filler for XNBR and the development of flame-retardant elastomer composites

Urea and guanidinium induced denaturation of a Trp-cage miniprotein

Vacancy-type defect distributions near argon sputtered Al(100) surface studied by variable-energy positrons and molecular dynamics simulations

Vegetable fillers for electric stimuli responsive elastomers

Water-Responsive and Mechanically Adaptive Natural Rubber Composites by in Situ Modification of Mineral Filler Structures

Wear of cemented tungsten carbide percussive drill–bit inserts

Laboratory and field study