Amr A, Saad M. 2015. Growth of Urban Peripheries with Reference to Inconsistent Spatial Planning Policies: South-east Amman as case study. European International Journal of Science and Technology. 4(3):54-68.

Piche RA. 2015. Mezhdunarodnaya konferencia po pozicionirovaniyu i navigacii vnutri pomeshhenij. Giroskopiya I Navigatsiya. 88(1):122-124.

Ryczkowski P, Närhi M, Billet C, Merolla J-M, Genty G, Dudley JM. 2017. Real-time measurements of dissipative solitons in a mode-locked fiber laser. arXiv eprint.

Messo T, Roinila T, Aapro A, Luhtala R. 2019. Accurate impedance model of grid-connected inverter for small-signal stability assessment in high-impedance grid. IEEJ JOURNAL OF INDUSTRY APPLICATIONS. 8(3). https://doi.org/10.23919/IPEC.2018.8507573

Huhtelin M, Nenonen S. 2015. A Co-creation Centre for University–Industry Collaboration – A Framework for Concept Development. Procedia Economics and Finance. 21:137 - 145. https://doi.org/10.1016/S2212-5671(15)00160-4

Stepanova E, Kudryavtsev I, Lohan E-S. 2015. Acquisition of E5 Galileo signals in Matlab. Procedia Engineering. 104:36-42. https://doi.org/10.1016/j.proeng.2015.04.094

Chaudhary S, Zhao Y, Berki E, Valtanen J, Li L, Helenius M, Mystakidis S. 2015. A Cross-Cultural and Gender-Based Perspective for Online Security: Exploring Knowledge, Skills and Attitudes of Higher Education Students. IADIS International Journal on WWW/Internet. 13(1):57-71.

Habib M, Hussain A, Rasheed S, Ali M. 2016. Adaptive fuzzy inference system based directional median filter for impulse noise removal. AEU International Journal of Electronics and Communication. 70(5):689-697. https://doi.org/10.1016/j.aeue.2016.02.005

Leivo V, Kiviste M, Aaltonen A, Turunen M, Haverinen-Shaughnessy U. 2015. Air pressure difference between indoor and outdoor or staircase in multi-family buildings with exhaust ventilation system in Finland. Energy Procedia. 78C:1218-1223. https://doi.org/10.1016/j.egypro.2015.11.188

Rojas V, Martinez F, Bernede JC, Guenadez LC, Efimov A, Lemmetyinen H. 2017. Alkyl thiophene vinylene electropolymerization in C8mimPF6, potential use in solar cells. Materials Sciences and Applications. 8(5):405-417. https://doi.org/10.4236/msa.2017.85013

Sheikh MU, Lempiainen J. 2018. Analysis of outdoor and indoor propagation at 15 GHz and millimeter wave frequencies in microcellular environment. Advances in Science, Technology and Engineering Systems. 3(1):160-167. https://doi.org/10.25046/aj030120

Passinmäki P. 2016. Architecture beyond signs and symbols : Zumthor's response to the problems of aesthetics. ARQ-Architectural Research Quarterly. 19(4):325-328. https://doi.org/10.1017/S1359135516000038

Gómez-Herrero G, Wu W, Rutanen K, Soriano MC, Pipa G, Vicente R. 2015. Assessing coupling dynamics from an ensemble of time series. Entropy. 17(4):1958-1970. https://doi.org/10.3390/e17041958

Saari U, Aarikka-Stenroos L, Boedeker S, Köppä L, Langwaldt J. 2017. Assessing the usefulness of an early idea development tool among experienced researchers. CERN IdeaSquare Journal of Experimental Innovation. 1(2):3-8. https://doi.org/10.23726/cij.2017.476

Kanerva M, Besharat Z, Pärnänen T, Jokinen J, Honkanen M, Sarlin E, Göthelid M, Schlenzka D. 2019. Automatization and stress analysis data of CoCr laser weld fatigue tests. Data in Brief. 26. https://doi.org/10.1016/j.dib.2019.104374

Spruijt-Metz D, Hekler E, Saranummi N, Intille S, Korhonen I, Nilsen W, Rivera DE, Spring B, Michie S, Asch DA, Sanna A, Salcedo VT, Kukakfa R, Pavel M. 2015. Building new computational models to support health behavior change and maintenance: new opportunities in behavioral research. Translational Behavioral Medicine. 5(3):335-346. https://doi.org/10.1007/s13142-015-0324-1

Yli-Hietanen J, Ylipää A, Yli-Harja O. 2015. Cancer research in the era of next-generation sequencing and big data calls for intelligent modeling. Chinese Journal of Cancer. 34(10). https://doi.org/10.1186/s40880-015-0008-8

Garifullin M, Bronzova MK, Heinisuo M, Mela K, Pajunen S. 2018. Cold-formed RHS T joints with initial geometrical imperfections. Magazine of Civil Engineering. 80(4):81-94. https://doi.org/10.18720/MCE.80.8

Teymouri S, Calejo MT, Hiltunen M, Sorkio AE, Juuti-Uusitalo K, Skottman H, Kellomäki M. 2017. Collagen-immobilized polyimide membranes for retinal pigment epithelial cell adherence and proliferation. Cogent Chemistry. 3(1). https://doi.org/10.1080/23312009.2017.1292593

Munir MW, Shahid N, Omair SM, Munir G, Ul Haque MZ. 2017. Comparative investigation of remote tracking devices for aging care. INTERNATIONAL JOURNAL OF INFORMATION TECHNOLOGY. 9(3):261-266. https://doi.org/10.1007/s41870-017-0034-7

Alexandru R-C, Lohan E-S. 2015. Comparison of Detection Techniques for Multipath Propagation of Pseudolite Signals Used in Dense Industrial Environments. Procedia Engineering. 100(C):1294-1300. https://doi.org/10.1016/j.proeng.2015.01.496

Keinänen M, Kähkönen K. 2018. Core Project Team As a Management Entity for Construction Projects. In_bo: Ricerche e progetti per il territorio, la citta e l'architettura. Construction Management. 9(13):208-217.

Vainio T, Walsh T, Varsaluoma J. 2015. Cross-Cultural Design of Mobile Mathematics Learning Service for South African Schools. IADIS International Journal on WWW/Internet. 12(1):81-93.

Róg T, Orłowski A, Llorente A, Skotland T, Sylvänne T, Kauhanen D, Ekroos K, Sandvig K, Vattulainen I. 2016. Data including GROMACS input files for atomistic molecular dynamics simulations of mixed, asymmetric bilayers including molecular topologies, equilibrated structures, and force field for lipids compatible with OPLS-AA parameters. Data in Brief. 7:1171-1174. https://doi.org/10.1016/j.dib.2016.03.067

Bernard A, Coatanea E, Christophe F, Laroche F. 2014. Design: A Key Stage of Product Lifecycle. Procedia CIRP. 21:3-9. https://doi.org/10.1016/j.procir.2014.06.146

Sasaki Y, Suzuki T, Iwagami T, Tani T, Naganuma H, Kino H, Hyttinen J, Kellomäki M, Tanaka T. 2014. Development of chip-surface stimulus electrode array for fully-implantable subretinal prosthesis chip. Transactions of Japanese Society for Medical and Biological Engineering. 52:O-253-O-254. https://doi.org/10.11239/jsmbe.52.O-253

Tani T, Naganuma H, Harashima T, Iwagami T, Kino H, Kiyoyama K, Kellomäki M, Hyttinen J, Tanaka T. 2014. Development of Si neural probe module with adjustable gain amplifier for neuronal signal recording. Transactions of Japanese Society for Medical and Biological Engineering. 52:O-377-O-378. https://doi.org/10.11239/jsmbe.52.O-377

Ellman A, Tiainen T. 2019. Diffusion of innovation: Case of co-design of cabins in mobile work machine industry. Computers. 8(2). https://doi.org/10.3390/computers8020039

Fei ZS, Gao Q, Fu Y, Isotalo T, Niemelä J. 2015. Distributed power allocation over indoor multi-pico stations. Journal of the Beijing Institute of Technology. 24(2):227-232. https://doi.org/10.15918/j.jbit1004-0579.201524.0214

Allahham MHDS, Al-Sa'd MF, Al-Ali A, Mohamed A, Khattab T, Erbad A. 2019. DroneRF dataset: A dataset of drones for RF-based detection, classification and identification. Data in Brief. 26. https://doi.org/10.1016/j.dib.2019.104313

Tan LC, Nancharaiah YV, van Hullebusch ED, Lens PNL. 2018. Effect of elevated nitrate and sulfate concentrations on selenate removal by mesophilic anaerobic granular sludge bed reactors. Environmental Science: Water Research & Technology. 4(2):303-314 . https://doi.org/10.1039/C7EW00307B

Singh A, Vihinen J, Frankberg E, Hyvärinen L, Honkanen M, Levänen E. 2017. Effect of Laser Power on Yield of TiO2 Nanoparticles Synthesized by Pulsed Laser Ablation in Water. Journal of Ceramic Science and Technology. 8(1):39-43. https://doi.org/10.4416/JCST2016-00071

Baczkiewicz J, Pajunen S, Heinisuo M. 2018. Effect of radiation inside square hollow section under moderate non-symmetric fire. Fire Research. 2(1):25-30. https://doi.org/10.4081/fire.2018.42

Stupnikov A, Glazko GV, Emmert-Streib F. 2015. Effects of subsampling on characteristics of RNA‑seq data from triple‑negative breast cancer patients. Chinese Journal of Cancer. 34(10). https://doi.org/10.1186/s40880-015-0040-8

Assanto G, Perumbilavil S, Piccardi A, Kauranen M. 2018. Electro-optic steering of random laser emission in liquid crystals. Photonics Letters of Poland. 10(4):103-105. https://doi.org/10.4302/plp.v10i4.852

Du L, Leivo V, Prasauskas T, Turunen M, Kiviste M, Martuzevicius D, Haverinen-Shaughnessy U. 2015. Energy Retrofits in Multi-family Buildings in North-east Europe: The Impacts on Thermal Conditions. Energy Procedia. 78:860-864. https://doi.org/10.1016/j.egypro.2015.11.008

Sheikh MU, Hiltunen K, Lempiainen J. 2018. Enhanced outdoor to indoor propagation models and impact of different ray tracing approaches at higher frequencies. Advances in Science, Technology and Engineering Systems. 3(2):58-68. https://doi.org/10.25046/aj030207

Chen Z, Dehmer M, Emmert-Streib F, Shi Y. 2015. Entropy of weighted graphs with Randić weights. Entropy. 17(6):3710-3723. https://doi.org/10.3390/e17063710

Us D, Brzezinski K, Buitenhuis T, Dendooven P, Ruotsalainen U. 2018. Evaluation of Median Root Prior for Robust In-Beam PET Reconstruction. IEEE Transactions on Radiation and Plasma Medical Sciences. 2(5):490-498. https://doi.org/10.1109/TRPMS.2018.2854231

Li L, Ghazi A, Boutellier J, Anttila L, Valkama M, Bhattacharyya SS. 2017. Evolutionary multiobjective optimization for adaptive dataflow-based digital predistortion architectures. EAI Endorsed Transactions on Cognitive Communications. 17(10). https://doi.org/10.4108/eai.23-2-2017.152187

Ropo M, Schneider M, Baldauf C, Blum V. 2016. First-principles data set of 45,892 isolated and cation-coordinated conformers of 20 proteinogenic amino acids. Scientific Data. 3. https://doi.org/10.1038/sdata.2016.9

Dongho-Nguimdo GM, Igumbor E, Zambou S, Joubert DP. 2019. First principles prediction of the solar cell efficiency of chalcopyrite materials AgMX 2 (M=In, Al; X=S, Se, Te). Computational Condensed Matter. 21. https://doi.org/10.1016/j.cocom.2019.e00391

Vilmi P, Nelo M, Voutilainen J-V, Palosaari J, Pörhönen J, Tuukkanen S, Jantunen H, Juuti J, Fabritius T. 2016. Fully printed memristors for a self-sustainable recorder of mechanical energy. Flexible and Printed Electronics. 1(2). https://doi.org/10.1088/2058-8585/1/2/025002

Vihola J, Sorri J, Heljo J, Kero P. 2015. Heat Loss Rate of the Finnish Building Stock. Procedia Economics and Finance. 21:601-608. https://doi.org/10.1016/S2212-5671(15)00218-X

Tukiainen A, Aho A, Polojärvi V, Ahorinta R, Guina M. 2016. High efficiency dilute nitride solar cells: Simulations meet experiments. Journal of Green Engineering. 5(3-4):113-132. https://doi.org/10.13052/jge1904-4720.5348

Reunanen T. 2015. Human Factor in Time Management. Procedia Manufacturing. 3:709-716. https://doi.org/10.1016/j.promfg.2015.07.311

Sorokin M, Strokina N, Eerola T, Lensu L, Karttunen K, Kalviainen H. 2016. Image-based characterization of the pulp flows. Pattern Recognition and Image Analysis. 26(3):630-637. https://doi.org/10.1134/S1054661816030196

Kurki V, Sidaraviciute R, Sörensen J, Kibocha SN, Retike I, Ikobe G, Tichonovas M, Elijosiute E, Rajala R. 2015. Importance and challenges of sharing experiences among an international and interdisciplinary group of doctoral students. Ympäristöhistoria: Finnish Journal of Environmental History. (1/2015):45-51.

Okun O, Kravchenko Y, Korpinen L. 2016. Influence of environmental conditions on EMF levels in a span of overhead transmission lines. Progress in Electromagnetics Research C. 63:163-171. https://doi.org/10.2528/PIERC16021106

Silwal B, Rasilo P, Belahcen A, Arkkio A. 2017. Influence of the rotor eccentricity on the torque of a cage induction machine. Archives of Electrical Engineering. 66(2):383-396. https://doi.org/10.1515/aee-2017-0029

Khorramdel B, Kraft TM, Mäntysalo M. 2017. Inkjet printed metallic micropillars for bare die flip-chip bonding. Flexible and Printed Electronics. 2(4):045005. https://doi.org/10.1088/2058-8585/aa9171

Palanivel S, Zhurina A, Doan P, Chandraseelan JG, Khandelwal VKM, Zubkov FI, Mahmudov KT, Pombeiro AJL, Yli-Harja O, Kandhavelu M. 2018. In vitro characterization of arylhydrazones of active methylene derivatives. Saudi Pharmaceutical Journal. 26(3):430-436. https://doi.org/10.1016/j.jsps.2017.12.018

Virtanen J, Kamppi A, Pekkarinen E, Määttä J-M, Järvinen J, Matilainen LJ, Teuho M, Hämäläinen T. 2017. Kactus2: A graphical EDA tool built on the IP-XACT standard. The Journal of Open Source Software. 2(13):1. https://doi.org/10.21105/joss.00151

Kaarakka TE, Ali-Löytty S, Huhtanen M. 2018. Kehittämistutkimus: vuorovaikutteisten Matlab-opetusohjelmien vaikutus minäpystyvyyteen ja oppimistuloksiin yliopistomatematiikassa. FMSERA Journal . 2(1):67-77.

Väyrynen H, Helander N, Kukko M. 2014. Knowledge Management Practices in Large Companies. The Macrotheme Review. 3(9):56-72.

Katko TS. 2015. Kohti tasapuolisempaa tutkimuksen arviointia: Pääkirjoitus. Ympäristöhistoria: Finnish Journal of Environmental History. 5(1):4-5.

Heikkilä J, Martinsuo M. 2015. Lean-tuotanto ja sen johtaminen: onnistuminen, haasteet ja soveltuminen Suomen yrityksiin ja muihin organisaatioihin. Työpoliittinen aikakauskirja. (3):18-24.

Laudyn UA, Kwaśny M, Jung PS, Trippenbach M, Assanto G, Karpierz MA. 2016. Linear and nonlinear light beam propagation in chiral nematic liquid crystal waveguides. Photonics Letters of Poland. 8(1):11-13. https://doi.org/10.4302/plp.2016.1.05

Bartsch H, Himmerlich M, Fischer M, Demko L, Hyttinen J, Schober A. 2015. LTCC-Based Multi-Electrode Arrays for 3D in Vitro Cell Cultures. Journal of Ceramic Science and Technology. 6(4):315-324. https://doi.org/10.4416/JCST2015-00056

Khosravi M, Kähkönen K. 2015. Management and Planning Under Complexities of Metro Construction. Procedia Economics and Finance. 21:415-421. https://doi.org/10.1016/S2212-5671(15)00194-X

Cenev Z, Zhang H, Sariola V, Rahikkala A, Liu D, Santos HA, Zhou Q. 2017. Manipulating Superparamagnetic Microparticles with an Electromagnetic Needle. Advanced Materials Technologies. 3(1). https://doi.org/10.1002/admt.201700177

Latifi SK, Saketi P, Kallio P. 2015. Microrobotic system for multi-rate measurement of bio-based fibres Z-directional bond strength. Journal of Micro-Bio Robotics. 10(1):13-26. https://doi.org/10.1007/s12213-015-0080-9

Pajunen S, Hautala J, Heinisuo M. 2019. Modelling the stressed skin effect by using shell elements with meta-material model. Magazine of Civil Engineering. 86(2):20-29. https://doi.org/10.18720/MCE.86.3

Järvinen A, Kuuluvainen H, Niemi JV, Saari S, Dal Maso M, Pirjola L, Hillamo R, Janka K, Keskinen J, Rönkkö T. 2015. Monitoring urban air quality with a diffusion charger based electrical particle sensor. Urban Climate. 14(3). https://doi.org/10.1016/j.uclim.2014.10.002

Lehtoranta K, Murtonen T, Vesala H, Koponen P, Alanen J, Simonen P, Rönkkö T, Timonen H, Saarikoski S, Maunula T, Kallinen K, Korhonen S. 2017. Natural Gas Engine Emission Reduction by Catalysts. Emission Control Science and Technology. 3(2):142-152. https://doi.org/10.1007/s40825-016-0057-8

Militano L, Orsino A, Araniti G, Iera A. 2017. NB-IoT for D2D-enhanced content uploading with social trustworthiness in 5G systems. Future Internet. 9(3). https://doi.org/10.3390/fi9030031

Vats S, Rissanen M. 2016. Parameters Affecting the Upcycling of Waste Cotton and PES/CO Textiles. Recycling. 1(1):166-177. https://doi.org/10.3390/recycling1010166

Kuuliala L, Pippuri T, Hultman J, Auvinen S-M, Kolppo K, Nieminen T, Karp M, Björkroth J, Kuusipalo J, Jääskeläinen E. 2015. Preparation and antimicrobial characterization of silver-containing packaging materials for meat. Food Packaging and Shelf Life. 6:53-60. https://doi.org/10.1016/j.fpsl.2015.09.004

Veronese A, Racca M, Pieters R, Kyrki V. 2017. Probabilistic Mapping of Human Visual Attention from Head Pose Estimation. Frontiers in Robotics and AI. https://doi.org/10.3389/frobt.2017.00053

Viro IE, Joutsenlahti J. 2018. Projektityöskentelyn kehittäminen yläkoulun matematiikan opetuksessa. FMSERA Journal . 2(1):90-99.

Karhu M, Lagerbom J, Kivikytö-Reponen P, Ismailov A, Levänen E. 2017. Reaction heat utilization in aluminosilicate-based ceramics synthesis and sintering. Journal of Ceramic Science and Technology. 8(1):101-112. https://doi.org/10.4416/JCST2016-00094

Russell MG, Huhtamäki J, Still K, Rubens N, Basole RC. 2015. Relational Capital for Shared Vision in Innovation Ecosystems. Triple Helix: A Journal of University-Industry-Government Innovation and Entrepreneurship. 2(1). https://doi.org/10.1186/s40604-015-0017-2

Hukka JJ, Katko TS. 2015. Resilient Asset Management and Governance Fordeteriorating Water Services Infrastructure. Procedia Economics and Finance. 21:112-119. https://doi.org/10.1016/S2212-5671(15)00157-4

Bragadin MA, Kähkönen K. 2015. Safety, Space and Structure Quality Requirements in Construction Scheduling. Procedia Economics and Finance. 21:407-414. https://doi.org/10.1016/S2212-5671(15)00193-8

Juuti P, Katko TS, Rajala R. 2017. Sata vuotta vesihuoltoa Suomessa. Vesitalous. 58(6):13-15.

Marttila T, Annila P, Suonketo J, Kero P, Pentti M. 2017. Securing the flow of information in renovation projects: Sustainable synergies from buildings to the urban scale. PROCEDIA ENVIRONMENTAL SCIENCES. 38:228-233. https://doi.org/10.1016/j.proenv.2017.03.109

Hackenberg J, Spiecker H, Calders K, Disney M, Raumonen P. 2015. SimpleTree: An Efficient Open Source Tool to Build Tree Models from TLS Clouds. Forests: Open Access Journal. 6(11):4245-4294. https://doi.org/10.3390/f6114245

Katko TS, Hukka JJ. 2015. Social and Economic Importance of Water Services in the Built Environment: Need for More Structured Thinking. Procedia Economics and Finance. 21:217-223. https://doi.org/10.1016/S2212-5671(15)00170-7

Savolainen J, Kähkönen K, Niemi O, Poutanen J, Varis E. 2015. Stirring the Construction Project Management with Co-creation and Continuous Improvement. Procedia Economics and Finance. 21:64-71. https://doi.org/10.1016/S2212-5671(15)00151-3

Katko TS. 2017. Suomen vesihuollon kehitys ja opit kansainvälisessä kontekstissa. Vesitalous. 58(1):8-11.

Garifullin MR, Barabash AV, Naumova EA, Zhuvak OV, Jokinen T, Heinisuo M. 2016. Surrogate modeling for initial rotational stiffness of welded tubular joints. Magazine of Civil Engineering. 63(3):53-76. https://doi.org/10.5862/MCE.63.4

Coatanéa E, Ryynänen L, Calonius O, Mokammel F, Riitahuhta A. 2015. Systematic Search and Ranking of Physical Contradictions Using Graph Theory Principles: Toward a Systematic Analysis of Design Strategies and their Impacts: TRIZ and Knowledge-Based Innovation in Science and Industry. Procedia Engineering. 131:1165-1182. https://doi.org/10.1016/j.proeng.2015.12.441

Hosseini SSS, Jamali MM, Astola J, Gorsevski PV. 2016. Target tracking via combination of particle filter and optimisation techniques. International Journal of Mathematical Modelling and Numerical Optimization. 7(2):212-229. https://doi.org/10.1504/IJMMNO.2016.077068

Helander N, Myllylä M. 2016. Teoriaa ja kokemuksia arvioinnista MOOCien aikakaudella. TAMPEREEN AMMATTIKORKEAKOULUN JULKAISUJA. SARJA B, RAPORTTEJA. 70-77.

Koivisto AJ, Jensen ACØ, Levin M, Kling KI, Maso MD, Nielsen SH, Jensen KA, Koponen IK. 2015. Testing the near field/far field model performance for prediction of particulate matter emissions in a paint factory. Environmental Sciences: Processes and Impacts. 17(1):62-73. https://doi.org/10.1039/c4em00532e

Hlavatý I, Kozák J, Krejci L, Samardzic I, Tuominen J. 2017. The effect of tungsten carbide particles content in a weld deposit on its abrasion resistance. Technical Gazette - Technicki vjesnik. 24(5):1345-1349. https://doi.org/10.17559/TV-20160503085356

Acimovic J, Mäki-Marttunen T, Linne M-L. 2015. The effects of neuron morphology on graph theoretic measures of network connectivity: The analysis of a two-level statistical model. Frontiers in Neuroanatomy. 9(June). https://doi.org/10.3389/fnana.2015.00076

Huovinen P. 2015. Theoretical 71-Concept Platform for Advancing Construction-related Business Management. Procedia Economics and Finance. 21:80-87. https://doi.org/10.1016/S2212-5671(15)00153-7

Laudyn UA, Kwaśny M, Karpierz MA, Assanto G. 2017. Three-color vector nematicon. Photonics Letters of Poland. 9(2):36-38. https://doi.org/10.4302/plp.v9i2.718

Karjalainen P, Timonen H, Saukko E, Kuuluvainen H, Saarikoski S, Aakko-Saksa P, Murtonen T, Dal Maso M, Ahlberg E, Svenningsson B, Brune WH, Hillamo R, Keskinen J, Rönkkö T. 2015. Time-resolved characterization of primary and secondary particle emissions of a modern gasoline passenger car. Atmospheric Chemistry and Physics Discussions. 15(22):33253-33282. https://doi.org/10.5194/acpd-15-33253-2015

Taibi D, Lenarduzzi V, Dieudonne L, Plociennik C. 2015. Towards a Classification Schema for Development Technologies: an Empirical Study in the Avionic Domain. INTERNATIONAL JOURNAL ON ADVANCES IN SOFTWARE. 8(1&2):125-135.

Kekonen A, Bergelin M, Viik J. 2018. Tutkimuskatsaus: Uusia menetelmiä haavan paranemisen arviointiin ja seurantaan. HAAVA. 20(3):30-32.

Myllykoski TJ, Mattila P, Ali-Löytty S, Kaarakka T, Viro E. 2018. Yliopistomatematiikan sähköisten tehtävien ja matemaattisen ajattelun kehittäminen. FMSERA Journal . 2(1):46-56.

Shao K, Zhou B, Wang G, Yu B. 2018. 基于相位旋转的SCMA码本优化方法. Xi Tong Gong Cheng Yu Dian Zi Ji Shu/Systems Engineering and Electronics. 40(10):2354-2362. https://doi.org/10.3969/j.issn.1001-506X.2018.10.29

Matikainen V, Koivuluoto H, Milanti A, Vuoristo P. 2015. Advanced coatings by novel high-kinetic thermal spray processes. Materia. 73(1):46-50.

Peura P, Vuoristo P, Vihinen J. 2015. Education and Materials Joining Research methods at Tampere University of Technology. Hitsaustekniikka. 65(2-3/2015):73-76.

Valtonen K, Tiainen T. 2015. Hard Rock (- ei Hallelujah, vaan) Tribology: Pohjoismainen kaivosteollisuuden kulumisongelmiin keskittyvä kurssi ja seminaari Tampereella. Materia. 2015(1):30-33.

Koponen O-P. 2015. Kangasala-talo: Vanhan kulttuuripitäjän uusi kulttuuritalo. Arkkitehti. 2015(4/2015):67-69.

Järveläinen M, Yli-Hallila T, Salpavaara T, Verho J, Vilkko M, Levänen E. 2015. Kolloidisten suspensioiden online -analysointi: tutkimuksesta liiketoimintaa. Materia. (5/2015):54-57.

Chudoba M. 2015. Koteja ja kokonaistaideteoksia. Arkkitehti. (3):76-78.

Hilliaho K, Hietaniemi J, Visa P. 2015. Lasitettujen parvekkeiden ja terassien käyttäytyminen tulipaloissa. Palontorjuntatekniikka. (Erikoisnumero):18-23.

Karjalainen P. 2015. Muuttuvat ajotilanteet aiheuttavat uudentyyppisiä ajoneuvojen hiukkaspäästöjä. Ympäristö ja terveys. 46(6):28-31.

Koponen O-P. 2015. Postmodernismi Suomen rakennusperinnössä. Arkkitehti. 2015(2/2015):72-74.

Viro E, Eriksson S-L. 2015. Projektioppiminen yläkoulun matematiikassa. Lumat. 3(7):1005-1009.

Ojala P, Saarenrinne P, Miettinen J, Multanen P, Kiilunen J, Hietala J-P, Kolu A, Pippola J, Mostofizadeh M, Ylönen M. 2015. Simulointi nopeuttaa käyttöiän määritystä. Promaint. 2:24-27.

Frankberg EJ. 2015. Suomen keraaminen seura - Keramiska sällskapet i Finland. Materia. 5:58-58.

Katko TS, Lukka A, Rajala R. 2015. Tampereelta valmistuneiden vesihuoltoalan diplomi-insinöörien sijoittuminen ja odotukset yliopisto-opetukselle. Vesitalous. (2):45-47.

Eriksson S-L, Haukkanen P, Hukka TI, Lemmetyinen H. 2015. Tampereen matemaattisten aineiden aineenopettajakoulutus. Lumat. 3( 6):800-807.

Passinmäki P. 2015. Taskinen yksissä kansissa. Arkkitehti. (2):89-90.

Tewfik M, Amr A. 2014. Arbitrary Land Use Policy in Jordan between Legal Brand and Property Control. European International Journal of Science and Technology. 3(9):86-93.

El-Khozondar H, El-Khozondar R, Matter K, Suntio T. 2016. A review study of photovoltoltaic array maximum power point tracking algorithms. Renewables: Wind, Water, and Solar. 3(1). https://doi.org/10.1186/s40807-016-0022-8

Hynynen A. 2016. Future in wood? Timber construction in boosting local development. European Spatial Research and Policy. 23(1):127-139. https://doi.org/10.1515/esrp-2016-0007

Sörensen J, Kurki V, Sidaraviciute R, Ngari Kibocha S, Retike I, Ikobe G, Tichonovas M, Elijosiute E, Rajala R. 2015. Interdisciplinary water research network building within Nordic and Baltic countries. Vatten. (71):79-83.

Juuti PS, Kurki V, Rajala R. 2017. Local narratives in the long term water conflicts: Case of Turku Region in Finland. Ympäristöhistoria: Finnish Journal of Environmental History. 2017(1):39-49.

Kraft T, Berger P, Lupo D. 2017. Printed and organic diodes: devices, circuits and applications. Flexible and Printed Electronics. 2(3). https://doi.org/10.1088/2058-8585/aa8ac3

Juuti P, Rajala R. 2017. Sata vuotta Suomen suurimmasta lavantautiepidemiasta. Vesitalous. 2017(1):12-14.

Juuti P, Rajala R. 2017. Valkea kaupunki, mustat vedet. Vesitalous. 2017(1):15-17.

Juuti P. 2017. Vesi, ongelma ennen ja nyt?. Ympäristöhistoria: Finnish Journal of Environmental History. 2017(1):54-65.

Müller P, Raitoharju M, Ali-Löytty S, Wirola L, Piche R. 2016. Обзор параметрических методов позиционирования на основе концепции отпечатка пальца. Giroskopiya I Navigatsiya. 24(1):3-35. https://doi.org/10.17285/0869-7035.2016.24.1.003-035

Garifullin M. 2018. Experimental moment resistance of rectangular hollow section T joints. MATEC Web of Conferences. 245. https://doi.org/10.1051/matecconf/201824508003

Karimi N, Alberucci A, Virkki M, Priimägi A, Kauranen M, Assanto G. 2016. Quenching nematicon fluctuations via photo-stabilization. Photonics Letters of Poland. 8(1):2-4. https://doi.org/10.4302/plp.2016.1.02

Helamaa A. 2015. Kattavasti rivitaloista. Arkkitehti. (3):80-81.

Kähkönen K, Huovinen P, Keinänen M. 2015. Editorial. Procedia Economics and Finance. 21:1-5.

Christiansen J, Birkinshaw J, Le Massaon P, Mäkinen S. 2017. Editorial: Experiments in an Organisational Context. CERN IdeaSquare Journal of Experimental Innovation. 1(2). https://doi.org/10.23726/cij.2017.684

Juuti PS. 2017. Editorial: Information to support decision-making. Ympäristöhistoria: Finnish Journal of Environmental History. 2017(1):5-6.

Tartia J. 2015. Arkinen liikkuminen kontekstina kaupunkitilan tarkasteluun. Versus.

Kähkönen K, ed. 2015. 8th Nordic Conference on Construction Economics and Organization. Procedia Economics and Finance. 21.

Toivari E, Manninen T, Nahata AK, Jalonen TO, Linne M-L. 2010. Calcium signaling in astrocytes: modeling Fura-2AM measurements. Frontiers in Neuroscience. https://doi.org/10.3389/conf.fnins.2010.13.00061

Varheenmaa M. 2015. A new generation sweating thermal manikin for the evaluation of the thermal comfort of protective clothing in Arctic Conditions. Konola S, Kähkönen P, editors. In Arctic Wears - Perspectives on Arctic Clothing. Lapland University of Applied Sciences. pp. 154-161. (Liiketoiminta ja yrittäjyys Sarja B. Raportit ja selvitykset 10/2015).

Koponen O-P. 2015. Meeting of Vernacular and Modern Architecture in Urbino: Giancarlo De Carlo and reading of the context. Mattila M, editor. In Italian Vernadoc 2015 – Amandola: Studying Italia and its architecture. The first 10 VERNADOC-years. Helsinki: Suomen ICOMOS, kansanrakentamisen komitea. pp. 26-29.

Salonen J, Laukkarinen A, Vinha J. 2015. Ulkoseinien rakennusfysikaaliset riskit ja pitkäaikaiskestävät ratkaisut. Soikkeli A, Koiso-Kanttila J, Sorri L, editors. In Korjaa ja korota: Kerrostalojen korjaamisen ja lisäkerrosten rakentamisen ratkaisuja. Oulu, Finland: Oulun yliopisto. pp. 74-81. (Oulun yliopisto, arkkitehtuurin osasto. A. Julkaisu).

Nisula J, Saari A. 2015. Aluetehokkuuden kustannusvaikutukset. In Nollaa parempi – Townhouse energiatehokkaassa asuinrakentamisessa. Aalto-yliopisto. pp. 102-107. (Aalto University publication series Crossover; 9/2015).

Ferrer BR. 2015. A Proposal of Decentralized Architecture for OKD-MES. Strzelczak S, Balda P, Garetti M, Lobov A, editors. In Open Knowledge-Driven Manufacturing & Logistics: The eScop Approach. Warsaw: Warsaw University of Technology Publishing House. pp. 331-340.

Ramis Ferrer B. 2015. Classification of Knowledge Representation Implementations in the Manufacturing Systems Domain. Strzelczak S, Balda P, Garetti M, Lobov A, editors. In Open Knowledge-Driven Manufacturing & Logistics: The eScop Approach. Warsaw University of Technology Publishing House. pp. 235-244.

Bernhardt J, Helander N, Jussila J, Kärkkäinen H. 2016. Crowdsourcing in Business-to-Business Markets: A Value Creation and Business Model Perspective. In Encyclopedia of E-Commerce Development, Implementation, and Management. United States: IGI Global. pp. 933-943. https://doi.org/10.4018/978-1-4666-9787-4.ch066

Munnukka J, Karjaluoto H, Mahlamäki T, Hokkanen V. 2017. Effects of Social Media on Consumers' Sports Brand Experiences and Loyalty. Stieler M, editor. In Creating Marketing Magic and Innovative Future Marketing Trends: Proceedings of the 2016 Academy of Marketing Science (AMS) Annual Conference. Springer International Publishing. pp. 1051-1064. ( Developments in Marketing Science: Proceedings of the Academy of Marketing Science). https://doi.org/10.1007/978-3-319-45596-9_194

Suominen O, Mörsky V, Ritala R, Vilkko M. 2016. Framework for optimization and scheduling of a copper production plant. In 26th European Symposium on Computer Aided Process Engineering, 2016. Elsevier Science B.V. pp. 1243-1248. (Computer Aided Chemical Engineering). https://doi.org/10.1016/B978-0-444-63428-3.50212-5

Porkka PL. 2016. Functional model for organisational and safety culture. In Chemical Engineering Transactions. Italian Association of Chemical Engineering AIDIC. pp. 907-912. (Chemical Engineering Transactions). https://doi.org/10.3303/CET1648152

Nommeots-Nomm A, Massera J. 2017. Glass and Glass-Ceramic Scaffolds: Manufacturing Methods and the Impact of Crystallization on In-Vitro Dissolution. In Scaffolds in Tissue Engineering - Materials, Technologies and Clinical Applications. InTech Open Access Publisher. https://doi.org/10.5772/intechopen.70242

Santinha J, Gupta A, Martins L, Annila T, Häkkinen A, Mora A, Lloyd-Price J, Ribeiro A, Oliveira SMD, Fonseca JR. 2016. icellfusion: Tool for fusion and analysis of live-cell images from time-lapse multimodal microscopy. In Biometrics: Concepts, Methodologies, Tools, and Applications. IGI Global. pp. 806-834. https://doi.org/10.4018/978-1-5225-0983-7.ch033

Mokammel F, Coatanea E, Bakhouya M, Christophe F, Nonsiri S. 2013. Impact analysis of graph-based requirements models using PageRank algorithm. In 2013 IEEE International Systems Conference (SysCon). IEEE. pp. 731-736. (2013 IEEE International Systems Conference (SysCon)). https://doi.org/10.1109/SysCon.2013.6549964

Lilja K. 2015. Jossakin vuoti öljy, muualla tihkuivat tiedot - etiikka katoavien rajojen ja suurten skandaalien aikakaudella. In Silmät auki It-etiikkaan. EDUSKUNNAN TULEVAISUUSVALIOKUNTA. pp. 85-101. (Eduskunnan tulevaisuusvaliokunnan julkaisu; 12).

Vainio T, Walsh T. 2015. Learning maths with mobiles: Cross-cultural design of technology with experiences in South-Africa and Finland. In Integrating Touch-Enabled and Mobile Devices into Contemporary Mathematics Education. IGI Global. pp. 79-96. https://doi.org/10.4018/978-1-4666-8714-1.ch004

Vainio T, Walsh T. 2016. Learning Maths with mobiles: Cross-cultural design of technology with experiences in South-Africa and Finland. In Blended Learning: Concepts, Methodologies, Tools, and Applications. IGI Global. pp. 741-759. https://doi.org/10.4018/978-1-5225-0783-3.ch037

Tuukkanen S, Rajala S. 2018. Nanocellulose as a Piezoelectric Material. In Piezoelectricity - Organic and Inorganic Materials and Applications. InTech Open Access Publisher. pp. 1-14. https://doi.org/10.5772/intechopen.77025

Harmanen J, Mikkonen T. 2016. On Polyglot Programming in the Web. In Modern Software Engineering Methodologies for Mobile and Cloud Environments. IGI Global. pp. 102-119. https://doi.org/10.4018/978-1-4666-9916-8.ch006

Lobov A. 2015. On service composition - dynamic formation and orchestration of service workflows. Strzelczak S, Balda P, Garetti M, Lobov A, editors. In Open Knowledge-Driven Manufacturing and Logistics - The eScop Approach. Warsaw University of Technology Publishing House. pp. 311-319.

Morasca S, Taibi D, Tosi D. 2013. OSS-TMM: Guidelines for improving the testing process of open source software. In Open Source Software Dynamics, Processes, and Applications. IGI Global. pp. 59-78. https://doi.org/10.4018/978-1-4666-2937-0.ch004

Pohjola J, Turunen J, Lipping T, Ikonen ATK. 2016. Probabilistic Framework for Modelling the Evolution of Geomorphic Features in 10,000-Year Time Scale: The Eurajoki River Case. In Geospatial Data in a Changing World: Selected papers of the 19th AGILE Conference on Geographic Information Science. Springer Verlag. pp. 369-382. (Lecture Notes in Geoinformation and Cartography). https://doi.org/10.1007/978-3-319-33783-8

Kähkönen K, Brandt J. 2017. Quality evaluation on of contractor’s schedule for building renovation. Ciribini A, Alaimo G, Capone P, Daniotti B, Dell’Osso G, Nicolella M, editors. In Re‐shaping the construction industry. ISTeA Italian Society of Science, Technology and Engineering of Architecture; Maggioli Editore. pp. 175-184.

Ketonen-Oksi S. 2017. Reinventing organisational creativity and innovation through adapting a service-based working culture. Schiuma G, Lerro A, editors. In Integrating arts and creativity into business practice. IGI Global. pp. 1-20. https://doi.org/10.4018/978-1-5225-2050-4

Ketonen-Oksi S. 2016. Re-inventing organizational creativity and innovation through adopting a service-based working culture. In Integrating Art and Creativity into Business Practice. IGI Global. pp. 1-20. https://doi.org/10.4018/978-1-5225-2050-4.ch001

Leppänen M, Sarkkila J, Hämäläinen H, Rinkinen J. 2018. Technical suitability of the fine fraction of municipal solid waste incineration bottom ash to the landfill capping liner. Raasakka V, Lahtinen P, editors. In Proceedings of the 10th International Conference on the Environmental and Technical Implications of Construction with Alternative Materials WASCON 2018: No Gradle, No Grave - Circular Economy into Practice. RIL - Finnish Association of Civil Engineers. pp. 168-175.

Kärkkäinen H, Jussila J, Erkinheimo P. 2015. The New Era of Crowdsourcing — Industrial Crowdsourcing. Salmelin B, editor. In Open Innovation Yearbook 2015. Brussel: European Commission. pp. 25-31. https://doi.org/10.2759/92658

Sislian R, da Silva FV, Gedraite R, Jokinen H, Rajan DK. 2017. The use of mathematical modeling for the development of a low cost fuzzy gain schedule neutralization control system. In Transactions on Engineering Technologies: World Congress on Engineering and Computer Science 2015. Springer Singapore. pp. 525-539. https://doi.org/10.1007/978-981-10-2717-8_37

Multisilta J, Niemi H. 2017. Tools, pedagogical models, and best practices for digital storytelling. Khosrow-Pour M, editor. In Encyclopedia of information science and technology. 4th ed. IGI Global.

Saari A, Tauriainen M. 2015. Townhouse-talotyypin rakennuskustannukset: kolmen suunnitteluratkaisun taloudellisuuden analysointi. In Nollaa parempi – Townhouse energiatehokkaassa asuinrakentamisessa. Aalto-yliopisto. pp. 94-97. (Aalto University publication series Crossover; 9/2015).

Ylinen A, Mäkinen J, Kouhia R. 2016. Two models for hydraulic cylinders in flexible multibody simulations. In Computational Methods for Solids and Fluids: Multiscale Analysis, Probability Aspects and Model Reduction. Springer. pp. 463-493. (Computational Methods in Applied Sciences). https://doi.org/10.1007/978-3-319-27996-1_17

Katko TS, Juuti P, Pietilä P, Rajala R. 2015. Water services heritage and institutional diversity. Willems W, van Schaik H, editors. In Water and Heritage: material, conceptual and spiritual connections. Sidestone Press.

Salmisto A. 2015. How to co-learn in campus. Nenonen S, Kärnä S, Junnonen J-M, Tähtinen S, Sandström N, editors. In Oppiva kampus - How to co-create campus?. Tampere: Suomen Yliopistokiinteistöt Oy. pp. 320-337.

Seppä V-P, Pelkonen AS, Kotaniemi-Syrjänen A, Viik J, Mäkelä MJ, Malmberg P. 2015. Impedanssipneumografia pienten lasten alahengitytiesoireiden selvittelyssä. In Allergiatutkimussäätiön vuosikirja 2015. (Allergiakoulu).

Leppänen M, Välisalo T, Laasonen J, ed. 2014. Liite 6: Yleistä kaivannaisjätealueista ja patoturvallisuudesta. In Kaivosten stressitesti 2013. Ympäristöministeriö. (Ympäristöministeriön raportteja).

Kotilainen S. 2015. Matkalla joustaviin asuinympäristöihin. In Joustavat asuinympäristöt: 10 visiota aikaa kestävään kaupunkiasumiseen. Tampere: Tampereen teknillinen yliopisto. Arkkitehtuurin laitos. pp. 10-13. (Housing Design).

Hynynen A. 2015. Puurakentamisesta potkua alueiden ja kaupunkien kehittämiseen. Hynynen A, Panu A-M, Taanila T, editors. In Puu-Hubi. : Perinteestä uusiin innovaatioihin. Tampereen teknillinen yliopisto. Arkkitehtuurin laitos. pp. 75-93.

Vinha J. 2015. Rakennusten rakennusfysikaalisen suunnittelun ja toteutuksen periaatteet. In Rakentajain kalenteri 2016. Rakennustieto Oy. pp. 399-426. (Rakentajain kalenteri).

Kylliäinen M. 2015. Rakenteiden ääneneristyskyvystä asumismelun kokemiseen. In Rakentajain Kalenteri. Helsinki: Rakennustieto Oy. pp. 92-96.

Koponen O-P. 2015. Tammerkoski ja Hämeenkatu Tampereen arkkitehtonisen identiteetin ankkureina. Hautamäki R, editor. In Tampereen tarina: Teollisuuden synnyttämä kaupunki harjujen ja järvien solmukohdassa. Kaupunkiympäristön kehittäminen: Tampereen kaupunki. pp. 35-42. (Tampereen kaupunki/Kaupunkiympäristön kehittäminen).

Poutanen J, Peltoniemi S, Pihlajarinne N. 2015. Uudet arkkitehtoniset ratkaisumallit muuttavat kampuksien ilmettä. Nenonen S, Kärnä S, Junnonen J-M, Tähtinen S, Sandström N, editors. In Oppiva kampus: How to co-create campus?. Tampere: Suomen Yliopistokiinteistöt Oy. pp. 72-93.

Lehtovuori P. 2015. Uusia tuulia Euroopasta. In Asukkaan ehdoilla: moninaisuutta asumamuotoihin. Helsinki: Rakennustieto Oy. pp. 42-59.

Niemi H, Kylliäinen M, Jäppinen J, Lindqvist M. 2015. 1800-luvun Helsingin kadonneiden konserttitilojen akustiikan mallintaminen. In Akustiikkapäivät 2015. Kuopio. pp. 77-82. (Akustiikkapäivät).

Hongisto V, Kylliäinen M, Hyönä J. 2015. ÄKK-hankkeen suositukset tulevaisuuden ääneneristysmääräyksiä koskien. In Rakennusfysiikka 2015. Tampere: Tampereen teknillinen yliopisto, rakennustekniikan laitos, rakennetekniikka. pp. 561-566.

Salo J, Huttunen P, Vinha J. 2017. Alipaineistetun tuulettuvan ryömintätilan rakennusfysikaaliset FEM-simuloinnit. Vinha J, Kivioja H, editors. In Rakennusfysiikka 2017. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut: 24-26.10.2017, Tampere. Tampere: Tampereen teknillinen yliopisto, Rakennustekniikka, Rakennusfysiikka. pp. 413-422. (Tampereen teknillinen yliopisto. Rakennustekniikka. Rakennusfysiikka. ).

Belahcen A, Kouhia R, Rasilo P, Ristinmaa M. 2015. A model for anisotropic magnetostriction. In Proceedings of the XII Finnish Mechanics Days. Rakenteiden Mekaniikan Seura ry. pp. 201-203.

Yaghoubi ST, Hartikainen J, Kolari K, Kouhia R. 2015. An anisotropic continuum damage model for concrete. Kouhia R, Mäkinen J, Pajunen S, Saksala T, editors. In Proceedings of the XII Finnish Mechanics Days: Suomen XII mekaniikkapäivien esitelmät. Rakenteiden Mekaniikan Seura ry. pp. 51.

Mardoukhi A, Saksala T, Hokka M, Kuokkala V-T. 2015. An experimental and numerical study of the dynamic Brazilian disc test on Kuru granite. In Proceedings of the XII Finnish Mechanics Day. pp. 210-215.

Kylliäinen M, Oliva D, Rekola L, Hongisto V. 2015. Asuinhuoneistojen betonivälipohjien askelääneneristyksen subjektiivinen ja objektiivinen arviointi. In Akustiikkapäivät 2015. Kuopio: Akustinen seura. pp. 204-207. (Akustiikkapäivät).

Mimilakis SI, Drossos K, Floros A, Katerelos D. 2013. Automated Tonal Balance Enhancement for Audio Mastering Applications. In Audio Engineering Society Convention 134. AES Audio Engineering Society.

Bautista GS, Johansson A, Parappurath N, Herranen O, Myllyperkiö P, Jiang H, Kauppinen E, Pettersson M, Kauranen M. 2015. Background-Free Second-Harmonic Generation Microscopy of Individual Carbon Nanotubes. In Nonlinear Optics 2015: Kauai, Hawaii United States 26–31 July 2015. OSA. (Nonlinear Optics Conference Series). https://doi.org/10.1364/NLO.2015.NW1A.5

Laitinen A, Santa-aho S, Lukinmaa H, Suominen L, Vippola M. 2017. Barkhausen noise Potcore sensor simulations with Comsol. In 12th International Conference on Barkhausen Noise and Micromagnetic Testing. ICBM. pp. 97-107.

Vänttinen K, Tuominen E, Vinha J. 2017. Betonin kosteusteknisten materiaaliominaisuuksien määrittäminen. Vinha J, Kivioja H, editors. In Rakennusfysiikka 2017. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut: 24.-26.10.2017, Tampere. Tampere: Tampereen teknillinen yliopisto, Rakennustekniikka, Rakennusfysiikka. pp. 461-470. (Tampereen teknillinen yliopisto. Rakennustekniikka. Rakennusfysiikka.).

Ratia M, Myllärniemi J. 2018. Beyond ic 4.0 : the future potential of bi-tool utilization in the private healthcare. In 13th International Forum on Knowledge Asset Dynamics, IFKAD 2018: Delft, Netherlands, 4-6 July 2018. (Proceedings IFKAD).

Toenger S, Godin T, Billet C, Dias F, Erkintalo M, Genty G, Dudley JM. 2015. Breathers Emergence in Spontaneous Modulation Instability. In European Quantum Electronics Conference 2015. Optical Society of America (OSA).

Annila P, Lahdensivu J, Pikkuvirta J, Pakkala T. 2015. By64 Tuulettuvat julkisivut 2016 -suunnittelu- ja toteusohjeen laadinta. Vinha J, Ruuska T, editors. In Rakennusfysiikka 2015. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut. 20.-22.10.2015, Tampere. Tampere: Tampereen teknillinen yliopisto, rakennustekniikan laitos, rakennetekniikka. pp. 109-114.

Sorsa A, Santa-aho S, Aylott C, Shaw B, Vippola M, Leiviskä K. 2017. Case depth prediction of nitrided components. In 12th International Conference on Barkhausen Noise and Micromagnetic Testing. ICBM. pp. 65-72.

Kiilakoski J, Lukac F, Koivuluoto H, Vuoristo P. 2017. Cavitation wear characteristics of Al2O3-ZrO2-ceramic coatings deposited by APS and HVOF -processes. In Internationl Thermal Spray Conference ITSC 2017, Conference Proceedings: June 7-9, 2017, Düsseldorf, Germany.. Düsseldorf: DVS Media GmbH. pp. 928-933. (DVS-Berichte / DVS - Deutscher Verband für Schweißen und Verwandte Verfahren e.V.).

Huova M, Ahopelto M, Ketonen M, Ahola V, Linjama M, Huhtala K. 2015. Characteristics of Digital Hydraulics with Commercial Controllers. In The Seventh Workshop on Digital Fluid Power . Linz Center of Mechatronics. pp. 114-128.

Rinkinen J, Elo L. 2015. Clean Components of Fluid Power System Reduce Maintenance Costs. In Maintenance, Condition Monitoring and Diagnostics; Maintenance Performance Measurement and Management: MCMD 2015 and MPMM 2015.

Holopainen S, Kouhia R, Könnö J, Saksala T. 2015. Computational modelling of high-cycle fatigue using a continuum based model. In Proceedings of the NSCM28: 28th Nordic Seminar on Computational Mechanics, October 22 – 23, 2015, Tallinn, Estonia. pp. 71-74.

Järvinen ST, Saari S, Keskinen J, Toivonen J. 2015. Detailed analysis of laser-induced breakdown spectroscopy of single particles using electrodynamic balance trapping. In The European Conference on Lasers and Electro-Optics 2015. Optical Society of America. pp. CH_7_5.

Cardin J, Dufour C, KHOMENKOV V, Fafin A, Monnet I, Rizza G, COULON P-E, Slablab A, Mailly D, Ulysse C, Lafosse X, Perruchas S, Gacoin T. 2013. Development of New Kinds of Plasmonics Materials Through Swift Heavy Ion Shaping Technique. In 7th International Conference on Materials for Advanced Technologies (ICMAT 2013), Jun 2013, Suntec, Singapore. Singapore.

Fischer H, Laamanen A, Iso-Heiko A, Schäfer O, Karvonen M, Karhu O, Huhtala K, Pulkkinen V-P, Huttunen A. 2015. Digital Hydraulics on Rails – Pilot Project of Improving Reliability on Railway Rolling Stock by Utilizing Digital Valve System. Laamanen A, Huhtala K, editors. In Proceedings of The Fourteenth Scandinavian International Conference on Fluid Power, SICFP15. pp. 644-654.

Uusitalo T, Virtanen H, Viheriälä J, Salmi JO, Aho A, Dumitrescu M. 2015. Dual-Mode Behavior in Multi-Section DFB Semiconductor Lasers with Laterally-Coupled Ridge-Waveguide Surface Gratings. In The European Conference on Lasers and Electro-Optics 2015. OSA - The Optical Society.

Toenger S, Godin T, Billet C, Dias F, Erkintalo M, Genty G, Dudley JM. 2015. Dynamics of rogue wave and soliton emergence in spontaneous modulation instability. In CLEO: QELS - Fundamental Science, CLEO_QELS 2015. Optical Society of America (OSA). https://doi.org/10.1364/CLEO_QELS.2015.FW4D.2

Sand J, Ihantola S, Peräjärvi K, Toivonen H, Nicholl A, Hrnecek E, Toivonen J. 2013. EMCCD imaging of strongly ionizing radioactive materials for safety and security. In 2013 Conference on Lasers and Electro-Optics - International Quantum Electronics Conference. Optical Society of America. pp. JSII_P_1.

Drossos K, Floros A, Agavanakis K, Tatlas N-A, Kanellopoulos N. 2012. Emergency Voice/Stress - level Combined Recognition for Intelligent House Applications. In Audio Engineering Society Convention 132. AES Audio Engineering Society.

Vuolle M, Salonius H-R, Lintinen J, Mäkinen J. 2015. Emotion measurement services for knowledge workers. In RESER2015: 25th Annual RESER Conference, September 10-12, 2015 Copenhagen, Denmark. Copenhagen: RESER European Association for Research on Services.

Sorri J, Heljo J, Uotila U, Ruusala A. 2017. Energiatehokkuusinformaatio palvelurakennuksissa. In Rakennusfysiikka 2017: Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut : 24.-26.10.2017, Tampere. Tampere: Tampereen teknillinen yliopisto, Rakennustekniikka, Rakennusfysiikka. pp. 325-330. (Tampereen teknillinen yliopisto. Rakennustekniikka. Rakennusfysiikka.).

Heljo J, Sorri J, Harsia P. 2017. Energiatehokkuus on entistä enemmän sähkötehon hallintaa. Vinha J, Kivioja H, editors. In Rakennusfysiikka 2017: Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut: 24.-26.10.2017, Tampere. Tampereen teknillinen yliopisto, Rakennustekniikka, Rakennusfysiikka. pp. 281-286. (Tampereen teknillinen yliopisto. Rakennustekniikka. Rakennusfysiikka.).

Teriö O, Sorri J. 2015. Energiatehokkuus rakennusalan ammattityövoiman täydennyskoulutuksessa. Vinha J, Ruuska T, editors. In Rakennusfysiikka 2015. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut. 20.-22.10.2015, Tampere. Tampere: Tampereen teknillinen yliopisto, rakennustekniikan laitos, rakennetekniikka. pp. 97-102.

Kylliäinen M, Niemi H, Jäppinen J, Lindqvist M. 2015. Engelin teatterin huoneakustiikan mallintaminen. In Akustiikkapäivät 2015. Akustinen seura. pp. 145-150. (Akustiikkapäivät).

Kauranen M, Czaplicki R, Mäkitalo J, Lehtolahti J, Koskinen K, Laukkanen J, Kuittinen M. 2015. Enhancement mechanisms for second-harmonic generation from metal nanostructures. In PROCEEDINGS OF SPIE: Ultrafast Phenomena and Nanophotonics XX.

Ryczkowski P, Barbier M, Friberg AT, Dudley JM, Genty G. 2015. Experimental demonstration of temporal ghost imaging. In 2015 European Conference on Lasers and Electro-Optics - European Quantum Electronics Conference. OSA.

Abe S, Ylinen A, Narra Girish N, Nikander R, Hyttinen J, Kouhia R, Sievänen H. 2015. Exploration of different boundary conditions in the sideways falling situation in hip fracture finite element modelling. In Proceeding of the XII Finnish Mechanics Days. Rakenteiden Mekaniikan Seura ry. pp. 130-135.

Kunwar P, Hassinen J, Bautista G, Ras RHA, Toivonen J. 2015. Fabrication of Fluorescent Silver Nanoclusters-based Micro-Label in Polymers. In The European Conference on Lasers and Electro-Optics 2015. OSA. (European Conference on Lasers and Electro-Optics Europe and International Quantum Electronics Conference).

Kantola E, Leinonen T, Ranta S, Tavast M, Guina M. 2013. High-efficiency yellow VECSEL with 20 W output power. In Optics Days 2013, Helsinki, Finland: Oral presentation in Optics Days 2013, Helsinki, Finland.

Kankkunen T, Kero P. 2015. Hometalolle suoritettavat toimenpiteet ja niiden valinta - case-esimerkki. Vinha J, Ruuska T, editors. In Rakennusfysiikka 2015. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut. 20.-22.10.2015, Tampere. Tampere: Tampereen teknillinen yliopisto, rakennustekniikan laitos, rakennetekniikka. pp. 265-270.

Linjama M, Huova M, Pietola M, Juhala J, Huhtala K. 2015. Hydraulic Hybrid Actuator: Theoretical Aspects and Solution Alternatives. Laamanen A, Huhtala K, Uusi-Heikkilä J, editors. In Proceedings of the Fourteenth Scandinavian International Conference on Fluid Power. Tampere: Tampere University of Technology.

Kylliäinen M, Takala J, Hongisto V. 2015. Ilmaääneneristysluku sekä standardisoitu ja normalisoitu äänitasoeroluku huoneistojen välisen ilmaääneneristävyyden kuvaajina. In Akustiikkapäivät 2015. Kuopio: Akustinen seura. pp. 158-161. (Akustiikkapäivät).

Pakkala T, Lemberg A-M, Köliö A, Lahdensivu J. 2015. Ilmastonmuutoksen vaikutus betonijulkisivujen vaurioitumisen etenemiseen. Vinha J, Ruuska T, editors. In Rakennusfysiikka 2015: Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut, 20.-22.10.2015, Tampere. Tampere: Tampereen teknillinen yliopisto, rakennustekniikan laitos, rakennetekniikka. pp. 203-210.

Toenger S, Ahvenjärvi J, Ryczkowski P, Genty G. 2018. Intensity Interferometry of Supercontinuum Light. Setälä T, Turunen J, T. Friberg A, Saastamoinen K, editors. In Trends in Electromagnetic Coherence. Joensuu: University of Eastern Finland. (Publications of the University of Eastern Finland. Reports and studies in forestry and natural sciences; 32).

Drossos K, Kotsakis R, Pappas P, Kalliris G, Floros A. 2013. Investigating Auditory Human-Machine Interaction: Analysis and Classification of Sounds Commonly Used by Consumer Devices. In Audio Engineering Society Convention 134. AES Audio Engineering Society.

Pakkala T, Lahdensivu J, Köliö A, Annila P. 2017. Julkisivujen ja parvekkeiden talvikorjausohje. Vinha J, Kivioja H, editors. In Rakennusfysiikka 2017: Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut, 24-26.10.2017, Tampere. Tampere: Tampereen teknillinen yliopisto, Rakennustekniikka, Rakennusfysiikka. pp. 179-184. (Tampereen teknillinen yliopisto. Rakennustekniikka. Rakennusfysiikka.).

Tuominen E, Vinha J. 2015. Kapillaaristen vedenimuominaisuuksien määrittämiseen sopivan vapaan vedenimukoelaitteiston kehittäminen. Vinha J, Ruuska T, editors. In Rakennusfysiikka 2015. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut. 20.-22.10.2015, Tampere. Tampere: Tampereen teknillinen yliopisto, rakennustekniikan laitos, rakennetekniikka. pp. 233-238.

Palvalin M, Vuori V, Helander N. 2017. Knowledge transfer and work productivity. Spender JC, Schiuma G, Gavrilova T, editors. In Proceedings of 12th International Forum on Knowledge Asset Dynamics: St. Petersburgh, Russia 7-9 June 2017. pp. 1120-1134. (Proceedings IFKAD).

Hilliaho K, Nordquist B, Wallentén P. 2015. Koko Julkisivua peittävän lasijulkisivun vaikutus Etelä-Ruotsissa sijaitsevan rakennuksen energiatehokkuuteen. Vinha J, Ruuska T, editors. In Rakennusfysiikka 2015. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut. 20.-22.10.2015, Tampere. Tampere: Tampereen teknillinen yliopisto, rakennustekniikan laitos, rakennetekniikka. pp. 509-516. (Rakennustekniikan laitos. Rakennetekniikka. Seminaarijulkaisu 4; 4).

Annila P, Hellemaa M, Suonketo J, Pentti M. 2015. Kosteus- ja mikrobivaurioiden laajuus kuntien rakennuksissa. Säteri J, Ahola M, editors. In Sisäilmastoseminaari 2015 SIY Raportti 33, Messukeskus, Helsinki 11.3.2015. Juva. pp. 95-100. (SIY Raportti).

Annila P, Lahdensivu J, Suonketo J, Pentti M, Laukkarinen A, Vinha J. 2017. Kosteusvaurioiden vakavuus kuntien rakennuksissa. Vinha J, Kivioja H, editors. In Rakennusfysiikka 2017. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut: 24.-26.10.2017, Tampere. Tampere: Tampereen teknillinen yliopisto, Rakennustekniikka, Rakennusfysiikka. pp. 135-140. (Tampereen teknillinen yliopisto. Rakennustekniikka. Rakennusfysiikka.).

Ruusala A, Vinha J. 2017. Koulujen ja päiväkotien laskettu ja toteutunut energiankulutus. Vinha J, Kivioja H, editors. In Rakennusfysiikka 2017. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut: 24.-26.10.2017, Tampere. Tampere: Tampereen teknillinen yliopisto, Rakennustekniikka, Rakennusfysiikka. pp. 267-274. (Tampereen teknillinen yliopisto. Rakennustekniikka. Rakennusfysiikka.).

Sekki P, Korhonen L, Vinha J. 2017. Kuorielementtien kuivumisen mallintaminen hydrataation huomioivalla FEM-laskennalla. Vinha J, Kivioja H, editors. In Rakennusfysiikka 2017. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut: 24.-26.10.2017, Tampere. Tampere: Tampereen teknillinen yliopisto, Rakennustekniikka, Rakennusfysiikka. pp. 399-405. (Tampereen teknillinen yliopisto. Rakennustekniikka. Rakennusfysiikka. ).

Jokisalo J, Sankelo P, Sirén K, Vinha J. 2017. Kustannusoptimaaliset energiakorjaus- ja uusiutuvan energian tuotannon ratkaisut kunnallisissa palvelurakennuksissa. Vinha J, Kivioja H, editors. In Rakennusfysiikka 2017. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut: 24.-26.10.2017, Tampere. Tampere: Tampereen teknillinen yliopisto, Rakennustekniikka, Rakennusfysiikka. pp. 287-292.

Tuominen E, Vinha J. 2015. Laastien vedenimukertoimen määrittämisen virhelähdekokeet. Vinha J, Ruuska T, editors. In Rakennusfysiikka 2015. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut. 20.-22.10.2015, Tampere. Tampere: Tampereen teknillinen yliopisto, rakennustekniikan laitos, rakennetekniikka. pp. 239-244.

Ruuska T, Vinha J. 2015. Laastin ja betonin lämmönjohtavuuden ja ominaislämpökapasiteetin määrittäminen lämpövirtalevylaitteella. Vinha J, Ruuska T, editors. In Rakennusfysiikka 2015. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut. 20.-22.10.2015, Tampere. Tampere: Tampereen teknillinen yliopisto, rakennustekniikan laitos, rakennetekniikka. pp. 227-232.

Laukkarinen A, Hilliaho K. 2015. Lasitetun parvekkeen lämpötilan ja lämpöhäviöiden laskenta. Vinha J, Ruuska T, editors. In Rakennusfysiikka 2015. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut. 20.-22.10.2015, Tampere. Tampereen teknillinen yliopisto, rakennustekniikan laitos, rakennetekniikka. pp. 181-186. (Rakennustekniikan laitos. Rakennetekniikka. Seminaarijulkaisu; 4).

Myllärniemi J, Pekkola S, Helander N. 2017. Lessons for data-based value creation. In 12th International Forum on Knowledge Asset Dynamics, IFKAD 2017. pp. 398-407. (Proceedings IFKAD).

Kolu A, Rajapolvi K, Hyvönen M, Multanen P, Huhtala K. 2015. Low-cost 3D lidar for the mapping of autonomous mobile work machine. In Proceedings of the Fourteenth Scandinavian International Conference on Fluid Power, SICFP15. May 20-22, 2015. Tampere, Finland.

Laukkarinen A, Heiskanen R, Vinha J. 2017. Maanvastaisten seinien lämpö- ja kosteustekninen toiminta. Vinha J, Kivioja H, editors. In Rakennusfysiikka 2017. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut: 24.-26.10.2017, Tampere. Tampere: Tampereen teknillinen yliopisto, Rakennustekniikka, Rakennusfysiikka. pp. 71-76. (Tampereen teknillinen yliopisto. Rakennustekniikka. Rakennusfysiikka.).

Kovalainen V, Kylliäinen M. 2015. Menetelmä parvekelasien ääneneristävyyden mitoittamiseksi liikennemelualueilla. In Rakennusfysiikka 2015. Tampereen teknillinen yliopisto, rakennustekniikan laitos, rakennetekniikka. pp. 617-622.

Saarelainen J, Kylliäinen M, Hupaniittu O. 2015. Mykkäelokuvakauden elokuvateatterien huoneakustiikka. In Akustiikkapäivät 2015. Kuopio: Akustinen seura. pp. 83-88. (Akustiikkapäivät).

Linjama M, Siivonen L, Huova M. 2015. Numerically Efficient Flow Model for On/Off Valves. Scheidl R, Winkler B, Kogler H, editors. In Proceedings of the Seventh Workshop on Digital Fluid Power. Linz, Austria: LCM GmbH. pp. 164-172.

Marttila T, Suonketo J, Kero P, Annila P. 2015. Onnistumistekijät valtion tukemissa homekorjaushankkeissa. Vinha J, Ruuska T, editors. In Rakennusfysiikka 2015: Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut, 20-22.10.2015, Tampere. Tampere: Tampereen teknillinen yliopisto, rakennustekniikan laitos, rakennetekniikka. pp. 253-258.

Saksala T, Holopainen S, Kouhia R. 2015. On the choice of damage variable in the continuum fatigue model based on a moving endurance surface. In Proceedings of the XII Finnish Mechanics Day. pp. 57-62.

Jeronen J, Kouhia R. 2015. On the effect of damping on stability of non-conservative systems. Kouhia R, Mäkinen J, Pajunen S, Saksala T, editors. In Proceedings of the XII Finnish Mechanics Days: Suomen XII mekaniikkapäivien esitelmät. Rakenteiden Mekaniikan Seura ry. pp. 77.

Kauppinen A, Kiviste M, Pirhonen J, Vinha J. 2017. Paine-erot Pirkanmaan ja Helsingin julkisissa palvelurakennuksissa. Vinha J, Kivioja H, editors. In Rakennusfysiikka 2017. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut: 24-26.10.2017, Tampere. Tampere: Tampereen teknillinen yliopisto, Rakennustekniikka, Rakennusfysiikka. pp. 215-221. (Tampereen teknillinen yliopisto. Rakennustekniikka. Rakennusfysiikka.).

Vuolle M, Sillanpää V. 2015. Performance management practices in construction business - a service recovery perspective. In 8th Conference on Performance Measurement and Management Control. The European Institute for Advanced Studies in Management, EIASM. (Conference on Performance Measurement and Management Control).

Laukkarinen A, Musakka S, Penttilä O, Teriö O, Vinha J. 2017. Puukerrostalon työmaavaiheen lämpö- ja kosteusolosuhteiden mittaukset. Vinha J, Kivioja H, editors. In Rakennusfysiikka 2017. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut: 24.-26.10.2017, Tampere. Tampere: Tampereen teknillinen yliopisto, Rakennustekniikka, Rakennusfysiikka. pp. 167-172. (Tampereen teknillinen yliopisto. Rakennustekniikka. Rakennusfysiikka.).

Teriö O, Penttilä O, Laukkarinen A, Musakka S, Vinha J. 2017. Puukerrostalorakentamisen kosteudenhallinta. Vinha J, Kivioja H, editors. In Rakennusfysiikka 2017. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut: 24.-26.10.2017, Tampere. Tampere: Tampereen teknillinen yliopisto, Rakennustekniikka, Rakennusfysiikka. pp. 173-178. (Tampereen teknillinen yliopisto. Rakennustekniikka. Rakennusfysiikka.).

Junttila H, Laukkarinen A, Vinha J. 2015. Puurunkoisten tuuletettujen yläpohjien kosteustekninen toiminta. Vinha J, Ruuska T, editors. In Rakennusfysiikka 2015. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut. 20.-22.10.2015, Tampere.. Tampere: Tampereen teknillinen yliopisto, rakennustekniikan laitos, rakennetekniikka. pp. 77-82. (Rakennustekniikan laitos. Rakennetekniikka. Seminaarijulkaisu; 4).

Latvanne P, Kylliäinen M. 2015. Puuvälipohjien akustiset ominaisuudet. In Rakennusfysiikka 2015. Tampereen teknillinen yliopisto, rakennustekniikan laitos, rakennetekniikka. pp. 567-572.

Heljo J, Kauppinen T. 2015. Pystytäänkö haitallisia ilmanvaihtovikoja havaitsemaan ja poistamaan. Vinha J, Ruuska T, editors. In Rakennusfysiikka 2015. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut. 20.-22.10.2015, Tampere. Tampere: Tampereen teknillinen yliopisto, rakennustekniikan laitos, rakennetekniikka. pp. 325-330.

Pietilä J, Mäkinen J. 2015. Raudoitetun betonirakenteen taivutuksen mallintaminen Ansys-ohjelmalla. Kouhia R, Mäkinen J, Pajunen S, Saksala T, editors. In Proceedings of the XII Finnish Mechanics Days. Helsinki: Rakenteiden Mekaniikan Seura ry. pp. 91-96.

Köliö A, Hohti H, Pakkala T, Laukkarinen A, Lahdensivu J, Mattila J. 2015. Raudoitteiden korroosionopeuden määrittäminen betonijulkisivussa korkean aikaresoluution säädatan avulla. In Rakennusfysiikka 2015. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut. 20.-22.10.2015, Tampere.. Tampereen teknillinen yliopisto, rakennustekniikan laitos, rakennetekniikka. pp. 195-202. (Rakennustekniikan laitos. Rakennetekniikka. Seminaarijulkaisu; 4).

Sand J, Ihantola S, Nicholl A, Hrnecek E, Toivonen J, Toivonen H, Peräjärvi K. 2015. Scanning of radioluminescence emission with a PMT for remote detection of alpha contamination. In The European Conference on Lasers and Electro-Optics 2015. Optical Society of America.

Slablab A, Divya S, Koskinen K, Czaplicki R, Kailasnath M, Radhakrishnan P, Kauranen M. 2015. Second-harmonic generation from thermally-evaporated indium selenide thin films. In The European Conference on Lasers and Electro-Optics 2015: Munich Germany 21–25 June 2015. Optical Society of America. pp. CE_12_4.

Ryczkowski P, Barbier M, Friberg AT, Dudley JM, Genty G. 2015. Shadow Ghost Imaging in the Time Domain. In Frontiers in Optics 2015. OSA. https://doi.org/10.1364/FIO.2015.FW6C.1

Contreras V, Lonnqvist J, Toivonen J. 2015. Single micro-particle scattering detection based on Edge Filter Enhanced Self-Mixing Interferometry. In 2015 European Conference on Lasers and Electro-Optics - European Quantum Electronics Conference. Optical Society of America. pp. CH_P_11.

Kokkinis E, Drossos K, Tatlas N-A, Floros A, Tsilfidis A, Agavanakis K. 2012. Smart microphone sensor system platform. In Audio Engineering Society Convention 132. AES Audio Engineering Society.

Jussila J, Helander N, Vuori V, Okkonen J. 2016. Sosiaalinen media brändi- ja asiakastiedon lähteenä. Tuomi P, editor. In TiedeAreena 2016. Pori: Tampereen teknillinen yliopisto, Porin laitos. pp. 55-56.

Poikonen E, Martinsuo M, Nenonen S. 2015. Standardizing the service delivery system for repetitive industrial services. In RESER 2015: 25th Annual RESER Conference. RESER European Association for Research on Services.

Tuominen E, Vainio M, Vinha J. 2017. Suomessa markkinoilla olevien kalsiumsilikaattilevyjen rakennusfysikaaliset materiaaliominaisuudet. Vinha J, Kivioja H, editors. In Rakennusfysiikka 2017. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut: 24.-26.10.2017, Tampere. Tampere: Tampereen teknillinen yliopisto, Rakennustekniikka, Rakennusfysiikka. pp. 455-460. (Tampereen teknillinen yliopisto. Rakennustekniikka. Rakennusfysiikka. ).

Huttunen P, Rantala J, Vinha J. 2017. Suuren lämmöneristämättömän maanvastaisen alapohjan vaikutus rakennuksen energiankulutukseen. Vinha J, Kivioja H, editors. In Rakennusfysiikka 2017. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut: 24-26.10.2017, Tampere. Tampere: Tampereen teknillinen yliopisto, Rakennustekniikka, Rakennusfysiikka. pp. 335-342. (Tampereen teknillinen yliopisto. Rakennustekniikka. Rakennusfysiikka.).

Ryczkowski P, Barbier M, Friberg AT, Dudley JM, Genty G. 2015. Temporal Ghost Imaging. In Frontiers in Optics 2015. OSA. https://doi.org/10.1364/FIO.2015.FTh4D.4

Kraft T, Cristoferi C, Trigaud T, Nunzi J-M, Ratier B. 2014. The Parallel Diode and Trap Behaviour of Ternary Polymer Solar Cells. In EU PVSEC Proceedings. EU PVSEC.

Fard Sanei MA, Kiilunen J, Pippola J, Lahokallio S, Frisk L. 2015. Thermomechanical properties of overmold epoxies in MEMS packaging. In Proceedings of the IMAPS Nordic Annual Conference , June 8-9, 2015, Helsingør, Denmark. IMAPS Nordic. pp. 175-179.

Holopainen S. 2015. Transpositions and duals high-order tensors. On theory and applications in mechanics. Kouhia R, editor. In Proceedings of the XII Finnish Mechanics Days: Suomen XII mekaniikkapäivien esitelmät. Rakenteiden Mekaniikan Seura ry. pp. 188-193. (Journal of Structural Mechanics).

Turquet L, Bautista G, Karvonen L, Dhaka V, Chen Y, Jiang H, Huhtio T, Lipsanen H, Kauranen M. 2015. Tunable nonlinear effects through focused spatially phase-shaped beams. In European Quantum Electronics Conference 2015. Optical Society of America.

Ocaña Flores M, Martinsuo M. 2015. Use of equipment lifecycle data in industrial services. In RESER 2015: 25th Annual RESER Conference. Copenhagen: RESER European Association for Research on Services.

Vinha J, Hedman M, Sirén K, Harsia P, Pentti M, Teriö O, Heljo J, Laukkarinen A, Annila P, Kaasalainen H, Jokisalo J, Pihlajamaa P. 2015. Uudessa COMBI-hankkeessa tutkitaan energiatehokkaan palvelurakentamisen haasteita ja ratkaisuja. Vinha J, Ruuska T, editors. In Rakennusfysiikka 2015. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut. 20.-22.10.2015, Tampere.. Tampereen teknillinen yliopisto, rakennustekniikan laitos, rakennetekniikka. pp. 487-496. (Rakennustekniikan laitos. Rakennetekniikka. Seminaarijulkaisu; 4).

Vinha J. 2015. Uusi Rakennusfysiikan käsikirja. In Sisäilmastoseminaari 2015. pp. 167-172. (Sisäilmastoyhdistys raportti; 33).

Vinha J. 2015. Uusi Rakennusfysiikan käsikirja - perustiedot rakennusfysikaalisesta suunnittelusta ja tutkimuksista. Vinha J, Ruuska T, editors. In Rakennusfysiikka 2015. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut. 20.-22.10.2015, Tampere. Tampere: Tampereen teknillinen yliopisto, rakennustekniikan laitos, rakennetekniikka. pp. 115-120.

Marttila T, Suonketo J, Kero P, Annila P, Pentti M. 2015. Valtion tukemien homekorjaushankkeiden arviointi (HKPro 2). Säteri J, Ahola M, editors. In Sisäilmastoseminaari 2015 SIY Raportti 33, Messukeskus, Helsinki 11.3.2015: Sisäilmastoseminaari. Juva. pp. 101-106.

Annila P, Marttila T, Kero P, Suonketo J, Pentti M. 2015. Valtion tukemien homekorjaushankkeiden arviointi -jatkotutkimus (HKPro 3). Säteri J, Ahola M, editors. In Sisäilmastoseminaari 2015 SIY Raportti 33, Messukeskus, Helsinki 11.3.2015. Juva. pp. 107-112. (Sisäilmayhdistys).

Moilanen C, Björkqvist T, Saarenrinne P. 2015. Wood compression model for radial compression of earlywood and latewood. In Proceedings of the XII Finnish Mechanics Days. Rakenteiden Mekaniikan Seura ry. pp. 261-266.

Viheriälä J, Aho A, Virtanen H, Koskinen M, Dumitrescu M, Guina M. 2017. 1180 nm GaInNAs quantum well based high power DBR laser diodes. Zediker MS, editor. In High-Power Diode Laser Technology XV. SPIE. (Proceedings of SPIE). https://doi.org/10.1117/12.2251317

Kantola E, Leinonen T, Ranta S, Tavast M, Penttinen J-P, Guina M. 2015. 1180nm VECSEL with 50 W output power. In Proceedings of SPIE - The International Society for Optical Engineering. SPIE. https://doi.org/10.1117/12.2079480

Viheriälä J, Tuorila H, Zia N, Cherchi M, Aalto T, Guina M. 2019. 1.3μm U-bend traveling wave SOA devices for high efficiency coupling to silicon photonics. Reed GT, Knights AP, editors. In Silicon Photonics XIV. SPIE, IEEE. (Proceedings of SPIE - The International Society for Optical Engineering). https://doi.org/10.1117/12.2505935

Mereuta A, Nechay K, Caliman A, Suruceanu G, Gallo P, Guina M, Kapon E. 2019. 1.55-μm wavelength wafer-fused OP-VECSELs in flip-chip configuration. Keller U, editor. In Vertical External Cavity Surface Emitting Lasers (VECSELs) IX. SPIE, IEEE. (Proceedings of SPIE - The International Society for Optical Engineering). https://doi.org/10.1117/12.2508342

Schwarz S, Hannuksela MM, Fakour-Sevom V, Sheikhi-Pour N. 2018. 2D Video Coding of Volumetric Video Data. In 2018 Picture Coding Symposium, PCS 2018 - Proceedings. IEEE. pp. 61-65. https://doi.org/10.1109/PCS.2018.8456265

Fakour-Sevom V, Guldogan E, Kämäräinen J-K. 2018. 360 panorama super-resolution using deep convolutional networks. In VISIGRAPP 2018 - Proceedings of the 13th International Joint Conference on Computer Vision, Imaging and Computer Graphics Theory and Applications . SCITEPRESS. pp. 159-165. https://doi.org/10.5220/0006618901590165

Yadav A, Chichkov NB, Gumenyuk R, Zherebtsov E, Melkumov MA, Yashkov MV, Dianov EM, Rafailov EU. 2019. 405-nm pumped Ce 3+ -doped silica fiber for broadband fluorescence from cyan to red. Digonnet MJF, Jiang S, editors. In Optical Components and Materials XVI. SPIE, IEEE. (Proceedings of SPIE - The International Society for Optical Engineering). https://doi.org/10.1117/12.2509599

Kantola E, Leinonen T, Penttinen J-P, Tavast M, Ranta S, Guina M. 2015. 50 W VECSEL emitting at 1180 nm. In 2015 Conference on Lasers and Electro-Optics Europe - European Quantum Electronics Conference, 21.-25.6. Munich, Germany: CB_3_1. OSA.

Saarinen EJ, Lyytikäinen J, Ranta S, Rantamäki A, Saarela A, Sirbu A, Iakovlev V, Kapon E, Okhotnikov OG. 2016. A 1.5-W frequency doubled semiconductor disk laser tunable over 40 nm at around 745 nm. In Proceedings of SPIE: Vertical External Cavity Surface Emitting Lasers (VECSELs) VI. SPIE. (Spie conference proceedings). https://doi.org/10.1117/12.2209384

Jussila JJ, Mustafee N, Aramo-Immonen H, Menon K, Hajikhani A, Helander N. 2017. A bibliometric study on authorship trends and research themes in knowledge management literature. In 12th International Forum on Knowledge Asset Dynamics, St. Petersburg, Russia 7-9 June 2017: Knowledge Management in the 21th Century: Resilience, Creativity and Co-creation. St. Petersburg, Russia. pp. 389-397.

Galinina O, Turlikov A, Pyattaev A, Johnsson K, Andreev S, Koucheryavy Y. 2015. A Capacity Bound for mmWave-based Channel Access in Ultra-Dense Wearable Deployments. In 2015 7th International Congress on Ultra Modern Telecommunications and Control Systems and Workshops (ICUMT). IEEE. pp. 298-304. https://doi.org/10.1109/ICUMT.2015.7382446

Drossos K, Zormpas N, Giannakopoulos G, Floros A. 2015. Accessible Games for Blind Children, Empowered by Binaural Sound. In Proceedings of the 8th ACM International Conference on PErvasive Technologies Related to Assistive Environments. New York, NY, USA: Association for Computing Machinery (ACM). pp. 5:1-5:8. (PETRA '15). https://doi.org/10.1145/2769493.2769546

Davidson P, Raunio JP, Piché R. 2016. Accurate depth estimation from a sequence of monocular images supported by proprioceptive sensors. In 23rd Saint Petersburg International Conference on Integrated Navigation Systems, ICINS 2016 - Proceedings. State Research Center of the Russian Federation. pp. 249-257.

Vehmas R, Jylhä J, Väilä M, Kylmälä J. 2015. A computationally feasible optimization approach to inverse SAR translational motion compensation. In Proceedings of the 12th European Radar Conference (EuRAD 2015). IEEE. pp. 17-20. https://doi.org/10.1109/EuRAD.2015.7346226

Kauppila P, Kouhia R, Ojanperä J, Saksala T, Sorjonen T. 2016. A continuum damage model for creep fracture and fatigue analyses. In 21st European Conference on Fracture, ECF21, 20-24 June 2016, Catania, Italy. pp. 887–894. (Procedia Structural Integrity). https://doi.org/10.1016/j.prostr.2016.06.114

Aldawood S, Fowley F, Pahl C, Taibi D, Liu X. 2016. A coordination-based brokerage architecture for multi-cloud resource markets. In Proceedings - 2016 4th International Conference on Future Internet of Things and Cloud Workshops, W-FiCloud 2016. Institute of Electrical and Electronics Engineers Inc. pp. 7-14. https://doi.org/10.1109/W-FiCloud.2016.19

Georgiev GY, Aho T, Kesseli J, Yli-Harja O, Kauffman SA. 2019. Action and power efficiency in self-organization: The case for growth efficiency as a cellular objective in escherichia coli. Flores Martinez CL, Georgiev GY, Smart JM, Price ME, editors. In Evolution, Development and Complexity - Multiscale Evolutionary Models of Complex Adaptive Systems. Springer. pp. 229-244. (Springer Proceedings in Complexity). https://doi.org/10.1007/978-3-030-00075-2_8

Voronin V, Pismenskova M, Zelensky A, Cen Y, Nadykto A, Egiazarian K. 2018. Action recognition using the 3D dense microblock difference. In Counterterrorism, Crime Fighting, Forensics, and Surveillance Technologies II. SPIE. (Proceedings of SPIE). https://doi.org/10.1117/12.2326801

Martinsuo M, Vuorinen L. 2019. Actors’ agency in the routines of innovation project portfolio management. In Proceedings of the EURAM European Academy of Management Conference 2019: 26-28 June 2019, Lisbon, Portugal. European Academy of Management, EURAM. (EURAM conference).

Ketonen-Oksi S. 2016. Adapting service-based working culture as the key driver for organisational creativity and innovation. In Towards a new architecture of knowledge : Big Data, culture and creativity: IFKAD 2016-11th International Forum on Knowledge Asset Dynamics, Dresden 15-17.6.2016, Germany.

M. Aref M, Astola P, Vihonen J, Tabus I, Ghabcheloo R, Mattila J. 2018. Adaptive Feedback in Local Coordinates for Real-time Vision-Based Motion Control Over Long Distances. In International Conference on Robotics and Mechantronics : (ICRoM 2017). IOP Publishing Ltd. (IOP conference series : materials science and engineering). https://doi.org/10.1088/1757-899X/320/1/012009

Ketonen-Oksi S, Jalonen H. 2017. Advocator, jester, spokesperson, provocateur and boundary spanner? Exploring different communication styles at twitter. In 12th Conference proceedings of IFKAD2017: St.Petersburg, Russia, 7-9 June 2017. (Proceedings IFKAD).

Lenarduzzi V, Stan AC, Taibi D, Tosi D, Venters G. 2017. A dynamical quality model to continuously monitor software maintenance. In Proceedings of the 11th European Conference on Information Systems Management, ECISM 2017. Academic Conferences and Publishing International Limited. pp. 168-178.

Yli-Fossi T, Kuusisto R. 2015. A dynamic paper machine simulator for testing of model predictive control applications. In Proceedings of AutomaatioXXI seminaari. Suomen Automaatioseura ry. pp. 1-6. (SAS julkaisusarja; 42).

Helander N, Boedeker M, Hellsten P, Jussila J, Myllärniemi J, Tukiainen M. 2016. Affective experiences and student engagement in higher education. In 44th Annual Conference Of The European Society For Engineering Education: 12-15 September 2016, Tampere, Finland. Tampere.

Vainio VV, Pulkkinen A. 2016. A follow-up case study of the relation of PLM Architecture, Maturity and Business processes. In Product Lifecycle Management in the Era of Internet of Things: 12th IFIP WG 5.1 International Conference, PLM 2015, Doha, Qatar, October 19-21, 2015, Revised Selected Papers. Springer New York LLC. pp. 867-873. (IFIP Advances in Information and Communication Technology). https://doi.org/10.1007/978-3-319-33111-9_79

Ahola T, Ståhle M, Martinsuo M. 2018. Agency relationships in global project business. In Proceedings of EURAM18 European Academy of Management conference 2018. European Academy of Management, EURAM. (EURAM conference).

Stormi K, Laine T, Korhonen T. 2016. Agile methods in performance management system development process. In 10th Conference On New Directions In Management Accounting, Brussels, Belgium, December 14-16, 2016.

Kerst T, Toivonen J. 2018. Alpha radiation induced luminescence in solar blind spectral region. In CLEO: Applications and Technology, CLEO_AT 2018. OSA - The Optical Society. https://doi.org/10.1364/CLEO_AT.2018.ATh4O.8

Van Mellaert R, Mela K, Tiainen T, Heinisuo M, Lombaert G, Schevenels M. 2016. A mixed-integer linear programming approach for global discrete size optimization of frame structures. In ECCOMAS Congress 2016 - Proceedings of the 7th European Congress on Computational Methods in Applied Sciences and Engineering: Crete; Greece; 5 June 2016 through 10 June 2016. National Technical University of Athens. pp. 3395-3408.

Salpavaara T, Lekkala J. 2015. A model based analysis of the measurement errors in inductively coupled passive resonance sensors. Holub J, editor. In IMEKO XXI World Congress, Proceedings, August 30 - September 4, 2015, Prague, Czech Republic.

Jääskeläinen A, Sillanpää V, Helander N. 2019. A model for profiling information and knowledge management in the public sector. In Proceedings of 14th IFKAD 2019 conference: Matera, Italy, 5-7 June. . (Proceedings IFKAD).

Aapro A, Messo T, Suntio T. 2015. An accurate small-signal model of a three-phase VSI-based photovoltaic inverter with LCL-filter. In 9th International Conference on Power Electronics and ECCE Asia (ICPE-ECCE Asia). pp. 2267-2274. https://doi.org/10.1109/ICPE.2015.7168092

Ho-Van K, Sofotasios PC, Que Son V, Thanh Tra L, Hong Lien P. 2015. Analysis of Cognitive Cooperative Networks with Best Relay Selection and Diversity Reception. In 2015 International Conference on Advanced Technologies for Communications (ATC). IEEE. pp. 651-656. https://doi.org/10.1109/ATC.2015.7388412

Peng Z, Richter P, Leppäkoski H, Lohan E-S. 2017. Analysis of Crowdsensed WiFi Fingerprints for Indoor Localization. In Proceedings of the 21st Conference of Open Innovations Association FRUCT. Helsinki, Finland: FRUCT. pp. 268-277.

Alexandru RC, Lohan E-S. 2016. Analysis of Real Mobility Records in Urban and Suburban Environments. In 26TH DAAAM International Symposium on Intelligent Manufacturing and Automation. DAAAM International. pp. 0688-0692. https://doi.org/10.2507/26th.daaam.proceedings.094

Laitinen J, Niemi A. 2015. Analysis of the aircraft operational reliability research series: From statistical models to avionics data monitoring. In Proceedings of the 9th World congress on engineering asset management (WCEAM 2014), Pretoria, South Africa 28-31 Oct, 2014.

Fedotov A, Pominova D, Orlovskaya E, Orlovskii Y, Niemi T, Gumenyuk R. 2019. Analysis of upconversion nanoparticles as an active medium for upconversion light sources. In Proceedings of SPIE: Optical Components and Materials XVI. S P I E - International Society for Optical Engineering. (Proceedings of SPIE : the International Society for Optical Engineering). https://doi.org/10.1117/12.2507599

Monakhov D, Naik D, Curcio IDD, Toukomaa H. 2018. Analysis of User Exploration Patterns during Scene Cuts in Omnidirectional Videos. In SMPTE 2018. SMPTE. https://doi.org/10.5594/M001845

Lampio K, Karvinen R. 2015. A new method to calculate natural convection heat transfer from a non-isothermal fin array. Neshumayev D, Sunden B, editors. In Proceedings of the 7th Baltic Heat Transfer Conference, August 24-26 2015, Tallinn Estonia. Tallinn: Tallinn University of Technology. (Baltic Heat Transfer Conference BHTC).

Alberucci A, Pannian JC, Slussarenko S, Piccirillo B, Santamato E, Marrucci L, Assanto G. 2016. A new waveguiding mechanism based upon geometric phase. In Frontiers in Optics 2016. Optical Society of America (OSA).

Suojanen M, Kuikka V, Nikkarila JP, Nurmi J. 2015. An example of scenario-based evaluation of military capability areas An impact assessment of alternative systems on operations. In 9th Annual IEEE International Systems Conference, SysCon 2015 - Proceedings. The Institute of Electrical and Electronics Engineers, Inc. pp. 601-607. https://doi.org/10.1109/SYSCON.2015.7116817

Rivero-Rodriguez A, Pileggi P, Nykänen O. 2015. An Initial Homophily Indicator to Reinforce Context-Aware Semantic Computing. In 7th International Conference on Computational Intelligence, Communication Systems and Networks (CICSyN). Riga: IEEE. pp. 89-93. (International Conference on Computational Intelligence, Communications and Networks). https://doi.org/10.1109/CICSyN.2015.26

Nurminen H, Ardeshiri T, Piche R, Gustafsson F. 2015. A NLOS-robust TOA positioning filter based on a skew-t measurement noise model. In 2015 International Conference on Indoor Positioning and Indoor Navigation (IPIN). IEEE. pp. 1-7. https://doi.org/10.1109/IPIN.2015.7346786

Krogerus T, Hyvönen M, Backas J, Huhtala K. 2015. Anomaly Detection and Diagnostics of a Wheel Loader Using Dynamic Mathematical Model and Joint Probability Distributions. In Proceedings of the Fourteenth Scandinavian International Conference on Fluid Power, SICFP15. May 20-22, 2015. Tampere, Finland. Tampere University of Technology. Department of Intelligent Hydraulics and Automation. (The Scandinavian International Conference on Fluid Power).

Kivimäki J, Suntio T. 2015. Appearance of a Drift Problem in Variable-step Perturbative MPPT Algorithms. In 31st European Photovoltaic Solar Energy Conference and Exhibition (EU PVSEC). pp. 1602-1608. https://doi.org/10.4229/EUPVSEC20152015-5AO.9.2

Saari M, Mäkinen T, Linna P. 2017. Applying third-party moocs in programming education: a case study. In 9th International Conference on Education and New Learning Technologies: 3-5 July, 2017 Barcelona, Spain. Barcelona, Spain: IATED. pp. 53-59. https://doi.org/10.21125/edulearn.2017.1014

Taibi D, Lenarduzzi V, Pahl C. 2018. Architectural patterns for microservices: A systematic mapping study. In CLOSER 2018 - Proceedings of the 8th International Conference on Cloud Computing and Services Science. SCITEPRESS. pp. 221-232. https://doi.org/10.5220/0006798302210232

Iarovyi S, Xu X, Lobov A, Lastra JLM, Strzelczak S. 2015. Architecture for Open, Knowledge-Driven Manufacturing Execution System. In Advances in Production Management Systems: Innovative Production Management Towards Sustainable Growth. Springer. pp. 519-527. https://doi.org/10.1007/978-3-319-22759-7_60

Silverajan B, Zhao H, Kamath A. 2019. A Semantic Meta-Model Repository for Lightweight M2M. In 2018 IEEE International Conference on Communication Systems, ICCS 2018. IEEE. pp. 468-472. https://doi.org/10.1109/ICCS.2018.8689185

Jääskeläinen A, Schiele H, Aarikka-Stenroos L. 2018. A social capital perspective on gaining optimal solutions from suppliers as preferred customer. In Academy of Management Proceedings. 1 ed. Academy of Management AOM. (Academy of Management Proceedings; 1). https://doi.org/10.5465/AMBPP.2018.16278abstract

Drossos K, Floros A, Potirakis S, Tatlas N-A, Tuna G. 2014. A Socially-Intelligent Multi-Robot Service Team for In-Home Monitoring. In Information, Intelligence, Systems and Applications, IISA 2014, The 5th International Conference on. IEEE. pp. 159-164. https://doi.org/10.1109/IISA.2014.6878763

Nisula K, Pekkola S. 2016. Assessing business learning by analysing ERP simulation log files. In AIS SIGED 2016 Conference on IS education and Research. : Dublin, Ireland, December 10-11, 2016. Dublin.

Einolander J, Vanharanta H. 2015. Assessment of student retention using the Evolute approach, an overview. In 6th International Conference on Applied Human Factors and Ergonomics (AHFE 2015) and the Affiliated Conferences, AHFE 2015. Elsevier. pp. 581–586. (Procedia Manufacturing). https://doi.org/10.1016/j.promfg.2015.07.269

D'Ignazio M, Di Buo B, Länsivaara T. 2015. A study on the behaviour of the weathered crust in the Perniö failure test. In Proceedings of the XVI ECSMGE 2015: 13-17 September 2015 - Edinburgh, Geotechnical Engineering for Infrastructure and Development. ICE Publishing. pp. 3639-3644.

Lohan E-S, Kauppinen T, Debnath SBC. 2016. A Survey of People Movement Analytics Studies in the Context of Smart Cities. In Proceedings of the FRUCT’19. pp. 151-158. https://doi.org/10.23919/FRUCT.2016.7892195

Prudanov A, Tkachev S, Golos N, Masek P, Hosek J, Fujdiak R, Zeman K, Ometov A, Bezzateev S, Voloshina N, Andreev S, Misurec J. 2016. A trial of yoking-proof protocol in RFID-based smart-home environment. In Distributed Computer and Communication Networks - 19th International Conference, DCCN 2016, Revised Selected Papers. Springer Verlag. pp. 25-34. (Communications in Computer and Information Science). https://doi.org/10.1007/978-3-319-51917-3_3

Heinimäki TJ, Elomaa T. 2015. Augmenting Technology Trees: Automation and Tool Support. In Proceedings of the Seventh International Conference on Virtual Worlds and Games for Serious Applications (VS-Games 2015). IEEE. pp. 68-75. https://doi.org/10.1109/VS-GAMES.2015.7295765

Halbach E, Kolu A, Ghabcheloo R. 2018. Automated pile transfer work cycles with a robotic wheel loader. Mela K, Pajunen S, Raasakka V, editors. In 17th International Conference on Computing in Civil and Building Engineering (ICCCBE): Tampere, 5-7 June 2018. Tampere, Finland: RIL.

Zare M, Neeli-Venkata R, Martins L, Peltonen S, Ruotsalainen U, Ribeiro AS. 2017. Automatic Classification of Z-ring Formation Stages at the Single Cell Level in Escherichia Coli by Machine Learning. Silveira M, Fred A, Gamboa H, Vaz M, editors. In Proceedings of the 10th International Joint Conference on Biomedical Engineering Systems and Technologies, Vol 2: Bioimaging. SCITEPRESS. pp. 72-76.

Fouladi A, Järvenhaara J, Filanovsky IM, Tchamov NT. 2016. A Variable Battery Supply DC-DC Buck Converter Designed for 45nm-CMOS Technology. In 2016 IEEE Canadian Conference on Electrical and Computer Engineering (CCECE), Vancouver, May 15-18, 2016.. https://doi.org/10.1109/CCECE.2016.7726839

Lehtonen V, Länsivaara T. 2016. Back-calculation of the Saint-Alban A test embankment with a new modelling approach in LEM. In Proceedings of the The 17th Nordic Geotechnical Meeting, Reykjavik Iceland: 25th - 28th of May 2016. pp. 691-699.

Salo K, Giova D, Mikkonen T. 2016. Backend infrastructure supporting audio augmented reality and storytelling. In Human Interface and the Management of Information: Applications and Services: 18th International Conference, HCI International 2016 Toronto, Canada, July 17-22, 2016. Proceedings, Part II. Springer Verlag. pp. 325-335. (Lecture Notes in Computer Science). https://doi.org/10.1007/978-3-319-40397-7_31

Värri A. 2015. Balancing Expectations to the Health Software Production Process Standard. In The 3rd International Virtual Research Conference In Technical Disciplines. (RCITD - Proceedings in Research Conference in Technical Disciplines). https://doi.org/10.18638/rcitd.2015.3.1.71

Tariq AB. 2012. Beaconing in a highway scenario: Vulnerable vehicles problem. In Proceedings of the 11th Conference of Open Innovations Association FRUCT, FRUCT 2012. IEEE. pp. 169-175. https://doi.org/10.23919/FRUCT.2012.8253122

Drossos K, Floros A, Giannakoulopoulos A. 2014. BEADS: A dataset of Binaural Emotionally Annotated Digital Sounds. In Information, Intelligence, Systems and Applications, IISA 2014, The 5th International Conference on. IEEE. pp. 158-163. https://doi.org/10.1109/IISA.2014.6878749

Michele Felicetti A, Ammirato S, Raso C, Aramo-Immonen H, Jussila J. 2016. Being a start-upper in Italy: Motivations, obstacles and success factors. In Proceedings of the 11th forum on knowledge asset dynamics: Towards a new architecture of knowledge: big data, culture and creativity. Dresden. pp. 1370-1383.

Viheriäkoski T, Kohtamäki J, Peltoniemi T, Tamminen P. 2015. Benchmarking of Factory Level ESD Control. In Electrical Overstress/Electrostatic Discharge Symposium Proceedings 2015. USA: IEEE COMPUTER SOC. https://doi.org/10.1109/EOSESD.2015.7314769

Zakeri FS, Bätz M, Jaschke T, Keinert J, Chuchvara A. 2019. Benchmarking of several disparity estimation algorithms for light field processing. Bazeille S, Verrier N, Cudel C, editors. In Fourteenth International Conference on Quality Control by Artificial Vision. SPIE, IEEE. (Proceedings of SPIE - The International Society for Optical Engineering). https://doi.org/10.1117/12.2521747

Kekonen A, Bergelin M, Eriksson J-E, Ylänen H, Kielosto S, Viik J. 2016. Bioimpedance measurement system for evaluation of the status of wound healing. In 2016 15th Biennial Baltic Electronics Conference (BEC) . IEEE. pp. 175-178. https://doi.org/10.1109/BEC.2016.7743757

Naumenko V, Solodovnik V, Totsky A, Zelensky A, Astola J. 2015. Bispectrum-based demodulation technique using triple-channel heterodyning of triplet-signal. In 2015 Second International Scientific-Practical Conference Problems of Infocommunications Science and Technology (PIC S&T). IEEE. pp. 224-226. https://doi.org/10.1109/INFOCOMMST.2015.7357319

Abramova VV, Kozhemiakin R, Abramov SK, Lukin VV, Zelensky AA, Egiazarian K. 2015. Blind estimation of speckle variance in synthetic aperture radar images. In 2015 International Conference on Antenna Theory and Techniques: Dedicated to 95 Year Jubilee of Prof. Yakov S. Shifrin, ICATT 2015 - Proceedings. The Institute of Electrical and Electronics Engineers, Inc. https://doi.org/10.1109/ICATT.2015.7136846

Sorri J, Heljo J, Järventausta P, Honkapuro S, Harsia P. 2016. Building Codes and Demand Response of Energy Use. Nenonen S, Junnonen J-M, editors. In Proceedings of the CIB World Building Congress 2016: Volume IV: Understanding Impacts and Functioning of Different Solutions. Tampere University of Technology. Department of Civil Engineering. pp. 8-21.

Haverinen-Shaughnessy U, Pekkonen M, Turunen M, Aaltonen A, Leivo V. 2016. Building energy retrofits, occupant health and wellbeing. Prins M, Wamelink H, Giddings B, Ku K, Feenstra M, editors. In CIB World Building Congress 2016 Proceedings : Volume 2 Environmental Opportunities and challenges - Constructing commitment and acknowledging human experiences. Tampere University of Technology. Department of Civil Engineering. pp. 679-687.

Myllärniemi J, Helander N, Hellsten P, Mahlamäki T, Repo S. 2017. Business intelligence approach – a practical tool for competence based curriculum development. In EDULEARN17 Proceedings. 9th International Conference on Education and New Learning Technologies: 3-5 July, 2017, Barcelona, Spain. IATED. pp. 6387-6393. https://doi.org/10.21125/edulearn.2017.2451

Ranta V, Aarikka-Stenroos L, Mäkinen S. 2016. Business models in the circular economy: a structured multiple-case analysis. In Proceedings of ISPIM Innovation Summit, Kuala Lumpur, Malaysia. The International Society for Professional Innovation Management (ISPIM): 4-7 December 2016.

Kurvinen A, Sorri J. 2016. Bus Transportation Accessibility - Does It Impact Housing Values?. Nenonen S, Junnonen J-M, editors. In Proceedings of the CIB World Building Congress 2016: Understanding impacts and functioning of different solutions. Tampere: Tampere University of Technology. Department of Civil Engineering. pp. 321-331.

Nenonen S, Eriksson R, Niemi O, Junghans A, Nielsen SB, Lindahl G. 2016. Campus retrofitting (CARE) methodology: a way to co-create future learning environments. In Proceedings of the 20th CIB World Building Congress 2016: May 30-June 3, 2016, Tampere, Finland. pp. 738-749.

Machado MA, Magnier-Watanabe R, Peltola T. 2016. Capturing knowledge from research projects: From project reports to storytelling. In 2016 Portland International Conference on Management of Engineering and Technology (PICMET). IEEE. pp. 2048-2057. https://doi.org/10.1109/PICMET.2016.7806602

Huttunen H, Shokrollahi Yancheshmeh F, Chen K. 2016. Car Type Recognition with Deep Neural Networks. In 2016 IEEE Intelligent Vehicles Symposium, IV 2016. IEEE. pp. 1115-1120. https://doi.org/10.1109/IVS.2016.7535529

Matikainen V, Rubio S, Ojala N, Koivuluoto H, Schubert J, Houdková S, Vuoristo P. 2017. Cavitation erosion, slurry erosion and solid particle erosion performance of metal matrix composite (MMC) coatings sprayed with modern high velocity thermal spray processes. In Materials Science and Technology Conference and Exhibition 2017, MS and T 2017: October 8-12, 2017, Pittsburgh, Pennsylvania USA. Association for Iron and Steel Technology, AISTECH. pp. 1161-1163.

Saarinen E. 2015. CBRN Defense Using THz Pulse Trains from Semiconductor Disk Lasers. In NATO ARW on THz Diagnostics of CBRN effects and Detection of Explosives & CBRN: Proceedings of the NATO ARW on Detection of Explosives and CBRN. (NATO Science for Peace and Security Series B: Physics and Biophysics).

Puolitaival T, Forsythe P, Kähkönen K. 2015. Challenges Facing BIM Education: Development of Appropriate Teaching and Learning Resources. In RICS COBRA AUBEA 2015: The Construction, Building and Real Estate Research Conference of the Royal Institution of Chartered Surveyors . London: Royal Institution of Chartered Surveyors.

Pulkkinen A, Huhtala P, Leino S-P, Anttila JP, Vainio VV. 2016. Characterising the industrial context of engineering change management. In Product Lifecycle Management in the Era of Internet of Things: 12th IFIP WG 5.1 International Conference, PLM 2015, Doha, Qatar, October 19-21, 2015, Revised Selected Papers. Springer New York LLC. pp. 618-627. (IFIP Advances in Information and Communication Technology). https://doi.org/10.1007/978-3-319-33111-9_56

Väätäjä H. 2015. Characterizing the Context of Use in Mobile Work. In Human Work Interaction Design. Work Analysis and Interaction Design Methods for Pervasive and Smart Workplaces: 4th IFIP 13.6 Working Conference, HWID 2015, London, UK, June 25-26, 2015, Revised Selected Papers. Springer Verlag. pp. 97-113. (IFIP Advances in Information and Communication Technology). https://doi.org/10.1007/978-3-319-27048-7_7

Tamminen P, Viheriäkoski T. 2016. Charged cable-system ESD event. In 2016 38th Electrical Overstress/Electrostatic Discharge Symposium (EOS/ESD). IEEE. https://doi.org/10.1109/EOSESD.2016.7592559

Viheriäkoski T, Kärjä E, Hillberg J, Tamminen P. 2016. Charge relaxation of slowly dissipative polymers. In 2016 38th Electrical Overstress/Electrostatic Discharge Symposium (EOS/ESD). IEEE. pp. 1-9. https://doi.org/10.1109/EOSESD.2016.7592533

Rizwan M, Rahmat-Samii Y, Ukkonen L. 2015. Circularly Polarized Textile Antenna For 2.45 GHz. In Circularly Polarized Textile Antenna For 2.45 GHz. IEEE. pp. 51-52. https://doi.org/10.1109/IMWS-BIO.2015.7303755

Knyazev S, Tarakanov S, Kuznetsov V, Porozov Y, Koucheryavy Y, Stepanov E. 2015. Coarse-grained model of protein interaction for bio-inspired nano-communication. In 2014 6th International Congress on Ultra Modern Telecommunications and Control Systems and Workshops (ICUMT). pp. 260-262. https://doi.org/10.1109/ICUMT.2014.7002112

Murayama M, Oguro D, Kikuchi H, Huttunen H, Ho YS, Shin J. 2017. Color-distribution similarity by information theoretic divergence for color images. In 2016 Asia-Pacific Signal and Information Processing Association Annual Summit and Conference, APSIPA 2016. IEEE. https://doi.org/10.1109/APSIPA.2016.7820681

Ritola T, Coatanea E. 2014. Combining Product Innovation With Service Innovation to Increase Value Created With a System. In Proceedings of the ASME international mechanical engineering congress and exposition, 2013, vol 12. AMER SOC MECHANICAL ENGINEERS.

Koivisto K, Forsman J, Ronkainen M, Lahtinen P, Kolisoja P, Kuula P. 2016. Commercialising reclaimed materials in earthworks – guidelines for productization and the process of appending these materials in the Finnish national code of practice. In Proceedings of the 17th Nordic Geotechnical Meeting Reykjavik Iceland: Challenges in Nordic Geotechnic 25th - 28th of May. Reykjavik: Icelandic Geotechnical Society.

Solomitckii D, Semkin V, Naderpour R, Ometov A, Andreev S. 2017. Comparative evaluation of radio propagation properties at 15 GHz and 60 GHz frequencies. In 2017 9th International Congress on Ultra Modern Telecommunications and Control Systems and Workshops (ICUMT). IEEE. pp. 91-95. https://doi.org/10.1109/ICUMT.2017.8255207

López Baeza J, Cerrone D, Männigo K. 2017. Comparing two methods for Urban Complexity calculation using Shannon-Wiener index. In Comparing two methods for Urban Complexity calculation using Shannon-Wiener index. WIT Press. pp. 369-378. (WIT Transactions on Ecology and The Environment). https://doi.org/10.2495/SDP170321

Kallonen A, Nieminen H, Das S, Sallinen R. 2018. Comparison of food frequency questionnaire data and shopping records for the assessment of food intake. In Proceedings of Seventh International Conference on Well-Being in the Information Society: Fighting Inequalities (WIS 2018). pp. 25-30. (TUCS Lecture Notes).

Schnabel J, Valkealahti S. 2015. Compensation of PV generator output power fluctuations with energy storage systems. In 31st European Photovoltaic Solar Energy Conference and Exhibition (31st EU PVSEC), 14– 18 September, 2015, Hamburg, Germany. pp. 2177-2181. https://doi.org/10.4229/EUPVSEC20152015-5BV.2.6

Salminen V, Kantola JI, Vanharanta H. 2015. Competence portfolio assessment of research and development center for regional development. In 6th International Conference on Applied Human Factors and Ergonomics (AHFE 2015) and the Affiliated Conferences, AHFE 2015 . Elsevier. pp. 701-708. (Procedia Manufacturing). https://doi.org/10.1016/j.promfg.2015.07.310

Pyrhönen V-P, Koivisto H. 2015. Composite Nonlinear Feedback Control of a Chemical Reactor. In Proceedings of AutomaatioXXI, The Industrial Revolution of Internet – From Intelligent Devices to Networked Intelligence. Helsinki, Finland: Suomen Automaatioseura ry. (SAS julkaisusarja).

Minaev G, Visa A, Piche R. 2017. Comprehensive survey of similarity measures for ranked based location fingerprinting algorithm. In Indoor Positioning and Indoor Navigation (IPIN), 2017 International Conference on. IEEE. https://doi.org/10.1109/IPIN.2017.8115922

Katkovnik V, Shevkunov I, Petrov NV, Egiazarian K. 2017. Computational wavelength resolution for in-line lensless holography: Phase-coded diffraction patterns and wavefront group-sparsity. In Digital Optical Technologies 2017. SPIE. (Proceedings of SPIE). https://doi.org/10.1117/12.2269327

Pyrhönen V-P, Seppälä J, Salmenperä M. 2016. Computer-supported collaborative learning: Praxes in new cell-oriented configurable PC-classroom. In SEFI conference 2016: Engineering Education on Top of the World: Industry University Cooperation.

Davidson P, Merkulova I. 2016. Computer vision aided navigation systems. In 23rd Saint Petersburg International Conference on Integrated Navigation Systems, ICINS 2016 - Proceedings. State Research Center of the Russian Federation. pp. 560-562.

Keinänen M, Uotila U, Sorri J, Teriö O, Kähkönen K. 2016. Consensus building in the pre-design phase of building projects. Prins M, Wamelink H, Giddings B, Ku K, Feenstra M, editors. In WBC16 Proceedings of the CIB World Building Congress 2016 Volume II : Environmental Opportunties and challenges, Constructing commitment and acknowledging human experiences. Tampere University of Technology. Department of Civil Engineering. pp. 561-572. (Tampere University of Technology. Department of Civil Engineering. Construction Management and Economics.).

Ortombina L, Liegmann E, Karamanakos P, Tinazzi F, Zigliotto M, Kennel R. 2018. Constrained Long-Horizon Direct Model Predictive Control for Synchronous Reluctance Motor Drives. In 2018 IEEE 19th Workshop on Control and Modeling for Power Electronics, COMPEL 2018. IEEE. https://doi.org/10.1109/COMPEL.2018.8460173

Vaittinen E, Nenonen S. 2015. Consumer acceptance in new service innovation: Enhancing consumer durables with new product-related services. In Proceedings of the 22nd Innovation Product Development Management Conference (IPDMC) . (International Product Development Management Conference).

Perttola H, Ronni H, Heinisuo M. 2014. Contact analysis included in a 3D FEA of tube splices. In Eurosteel 2014 7th European conference on steel and composite structures.

Rautiainen A, Lummi K, Järventausta P, Tikka V, Lana A. 2016. Control of Electric Vehicle Charging in Domestic Real Estates as Part of Demand Response Functionality. In Cired Workshop 2016.

Cakir E, Virtanen T. 2017. Convolutional Recurrent Neural Networks for Rare Sound Event Detection. In Proceedings of the Detection and Classification of Acoustic Scenes and Events 2017 Workshop (DCASE2017). Tampere University of Technology. Laboratory of Signal Processing. pp. 27-31.

Helander N, Vesalainen J, Juha P. 2015. Coopetition and company performance. In IMP 2015 Conference.

Brechet N, Ginestet G, Moradi E, Ukkonen L, Torres J, Björninen T, Virkki J. 2017. Cost- and time-effective sewing patterns for embroidered passive UHF RFID tags. In Proceedings of IEEE 2017 International Workshop on Antenna Technology. IEEE. pp. 30-33. https://doi.org/10.1109/IWAT.2017.7915289

Jarusriboonchai P, Olsson T, Prabhu V, Väänänen-Vainio-Mattila K. 2015. CueSense: a Wearable Proximity-Aware Display Enhancing Encounters. In CHI EA '15 Proceedings of the 33rd Annual ACM Conference Extended Abstracts on Human Factors in Computing Systems . ACM. https://doi.org/10.1145/2702613.2732833

Jaakkola H, Thalheim B. 2015. Culture-Aware Web Information System Development. Welzer T, Hölbl M, Kiyoki Y, Thalheim B, Jaakkola H, editors. In 25th International Conference on Information Modelling and Knowledge Bases EJC 2015 June 9-12, 2015, Maribor, Slovenia. Maribor: University of Maribor, Faculty of Electrical Engineering and Computer Science. pp. 121-138.

Jaakkola H, Thalheim B. 2017. Culture-Aware Web Information Systems in Dependence of Context. Sornlertlamvanich V, Chawakitchareon P, Hansuebsai A, Koopipat C, Kiyoki Y, Jaakkola H, Thalheim B, Yoshida N, editors. In The Proceedings of the 27th International Conference on Information Modelling and Knowledge Bases. Sirindhorn International Institute of Technology, Thammasat University, Thailand. pp. 309-331.

Stormi K, Laine T, Suomala P. 2016. Customer lifetime value in manufacturing services. In Proceedings of the Manufacturing Accounting Research Conference 2016: Lisbon, Portugal, June 15-17, 2016. Belgium: European Institute for Advanced Studies in Management EIASM.

Helander N, Sillanpää V, Vuori V, Uusitalo O. 2017. Customer Perceived Value - A Key in Marketing of Integrated Solutions. Kavoura A, Sakas D, Tomaras P, editors. In The 5th International Conference on Strategic Innovative Marketing., At Athens, Greece, Volume: 5: September 23-26, 2016. Springer. pp. 37-42. (Springer Proceedings in Business and Economics). https://doi.org/10.1007/978-3-319-56288-9_6

Vanharanta H, Kantola J, Seikola S. 2015. Customers’ conscious experience in a coffee shop. In 6th International Conference on Applied Human Factors and Ergonomics (AHFE 2015) and the Affiliated Conferences, AHFE 2015 . Elsevier. pp. 618-625. (Procedia Manufacturing). https://doi.org/10.1016/j.promfg.2015.07.283

Ala-Maakala M, Liimatainen H. 2016. Customer value management framework for supply chains. Pawar K, editor. In The proceedings of 21st international symposium on logistics (ISL 2016): Sustainable transport and supply chain innovation, Kaohsiung, Taiwan 3-6 July 2016. pp. 447-456.

Devos M, Ometov A, Mäkitalo N, Aaltonen T, Andreev S, Koucheryavy Y. 2016. D2D communications for mobile devices: Technology overview and prototype implementation. In 8th International Congress on Ultra Modern Telecommunications and Control Systems and Workshops (ICUMT). IEEE. pp. 124-129. https://doi.org/10.1109/ICUMT.2016.7765344

Väyrynen T, Peltokangas S, Anttila E, Vilkko M. 2015. Data-Driven Approach for Analysis of Performance Indices in Mobile Work Machines. Klemas T, Chan S, editors. In DATA ANALYTICS 2015, The Fourth International Conference on Data Analytics. pp. 81-86.

Valenti M, Diment A, Parascandolo G, Squartini S, Virtanen T. 2016. DCASE 2016 Acoustic Scene Classification Using Convolutional Neural Networks. In Proceedings of the Detection and Classification of Acoustic Scenes and Events 2016 Workshop (DCASE2016). Tampere University of Technology. Department of Signal Processing.

Martinsuo M, Arvio I. 2015. Decision making on sustainability in product development projects. In 15th Annual Conference of EURAM European Academy of Management: EURAM 2015. Warsaw: European Academy of Management, EURAM.

Huuhka S. 2016. Demolished buildings: Empirical evidence on types, ages and construction materials. Hajek P, Tywoniak J, Lupisek A, Sojkova K, editors. In CESB16 - Central Europe towards Sustainable Building 2016: Innovations for Sustainable Future, June 22-24, 2016, Prague. Prague: Czech Technical University in Prague. pp. 1105-1112.

Huuhka S. 2016. Demolition Rates of Buildings with Different Functions and Construction Materials. Zelezna J, Hajek P, Tywoniak J, Lupisek A, Sojkova K, editors. In YRSB16 - iiSBE Forum of Young Researchers in Sustainable Building 2016: Innovations for Sustainable Future June 21, 2016, Prague. Prague: Czech Technical University in Prague. pp. 301-307.

Mäki A-J, Kontunen A, Ryynänen T, Verho J, Kreutzer J, Lekkala J, Kallio P. 2016. Design and simulation of a thermal flow sensor for gravity-driven microfluidic applications. In IEEE 11th Annual International Conference on Nano/Micro Engineered and Molecular Systems (NEMS). IEEE. pp. 125-129. https://doi.org/10.1109/NEMS.2016.7758214

Joutsenlahti J, Ali-Löytty S, Pohjolainen S. 2016. Developing Learning and Teaching in Engineering Mathematics with and without Technology. In SEFI 2016 Annual Conference Proceedings: Engineering Education on Top of the World: Industry University Cooperation. European Society for Engineering Education SEFI.

Sislian R, Da Silva FV, Gedraite R, Jokinen H, An DKR. 2015. Development of a Low-Cost Fuzzy Gain Schedule Neutralization Control System. In WCECS 2015 - World Congress on Engineering and Computer Science 2015. Newswood Limited. pp. 575-578. (Lecture Notes in Engineering and Computer Science).

Fang CY, Vallini F, Amili AE, Tukiainen A, Lyytikäinen J, Guina M, Fainman Y. 2018. Development of efficient electrically pumped nanolasers based on InAlGaAs tunnel junction. In CLEO: Science and Innovations, CLEO_SI 2018. OSA - The Optical Society. https://doi.org/10.1364/CLEO_SI.2018.SW4Q.4

Salmisto A, Keinänen M, Kähkönen K. 2016. Development of students’ multidisciplinary collaboration skills by simulation of the design process. In Proceedings of the CIB World Building Congress 2016: Volume I - Creating built environments of new opportunities.. pp. 348-360.

Hokka M, Mirow N, Nagel H, Vogt S, Kuokkala V-T. 2016. DIC measurements of the human heart during cardiopulmonary bypass surgery. In Conference Proceedings of the Society for Experimental Mechanics Series. Springer New York LLC. pp. 51-59. https://doi.org/10.1007/978-3-319-21455-9_6

Uusitalo T, Virtanen H, Viheriälä J, Salmi J, Aho AT, Dumitrescu M. 2016. Difference frequency modulation of multi-section dual-mode lasers with nanoscale surface gratings. Belyanin AA, Smowton PM, editors. In SPIE Proceedings: Novel In-Plane Semiconductor Lasers XV. SPIE. (Proceedings of SPIE). https://doi.org/10.1117/12.2213888

Kärkkäinen H, Silventoinen A. 2016. Different approaches of the PLM maturity concept and their use domains –analysis of the state of the art. In Product Lifecycle Management in the Era of Internet of Things: 12th IFIP WG 5.1 International Conference, PLM 2015, Doha, Qatar, October 19-21, 2015, Revised Selected Papers. Springer New York LLC. pp. 89-102. (IFIP Advances in Information and Communication Technology). https://doi.org/10.1007/978-3-319-33111-9_9

Pannian JC, Alberucci A, Boardman A, Assanto G. 2016. Diffraction compensation of finite beams in hyperbolic metamaterials. In Laser science 2016. Optical Society of America (OSA).

Soltani A, Curtze S, Lahti J, Järvelä K, Laurikka J, Hokka M, Kuokkala VT. 2018. Digital image correlation study of the deformation and functioning of the human heart during open-heart surgery. In Mechanics of Biological Systems, Materials and other topics in Experimental and Applied Mechanics - Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics. Springer New York LLC. pp. 19-27. (Conference Proceedings of the Society for Experimental Mechanics). https://doi.org/10.1007/978-3-319-63552-1_4

Karimi N, Kunwar P, Toivonen J. 2015. Direct Laser Writing of Fluorescent Silver Nanoclusters in Polyvinyl Alcohol Films. In Frontiers in Optics 2015: Proceedings. https://doi.org/10.1364/FIO.2015.FTu5E.4

Narhi M, Wetzel B, Billet C, Merolla J-M, Toenger S, Sylvestre T, Morandotti R, Dias F, Genty G, Dudley JM. 2016. Direct Measurement of Temporal Rogue Waves Generated by Spontaneous Modulation Instability. In Frontiers in Optics 2016. Optical Society of America.

Ritala P, Aarikka-Stenroos L. 2016. Disruptive innovation in ecosystems: Path-creation and institutional barriers. In XXVI ISPIM Conference: Porto, Portugal (2016) Blending Tomorrow’s Innovation Vintage.: The International Society for Professional Innovation Management, Jun. 2016. Manchester: International Society for Professional Innovation Management ISPIM. pp. 1-16.

Kriesi C, Steinert M, Aalto-Setälä L, Anvik A, Balters S, Baracchi A, Jensen BM, Bjorkli LE, Buzzaccaro N, Cortesi D, D'Onghia F, Dosi C, Franchini G, Fuchs M, Gerstenberg A, Hansen E, Hiekkanen KM, Hyde D, Ituarte I, Kalasniemi J, Kurikka J, Lanza I, Laurila A, Lee TH, Lonvik S, Mansikka-Aho A, Nordberg M, Oinonen P, Pedrelli L, Pekuri A, Rane E, Reime T, Repokari L, Ronningen M, Rowlands S, Sjoman H, Slattsveen K, Strachan A, Stromstad K, Suren S, Tapio P, Utriainen T, Vignoli M, Vijaykumar S, Welo T, Wulvik A. 2015. Distributed Experiments in Design Sciences, a Next Step in Design Observation Studies?. Weber C, Husung S, Cantamessa M, Cascini G, Marjanovic D, Venkataraman S, editors. In DS 80-2 Proceedings of the 20th International Conference on Engineering Design (ICED 15) Vol 2: Design Theory and Research Methodology Design Processes. DESIGN SOC. (International Conference on Engineering Design).

Aarikka-Stenroos L, Talvitie M. 2015. Distributors As Market Orientation Agents in Innovation Development and Commercialization. In The Proceedings of the XXVI ISPIM Conference 2015 Budapest, Hungary . Denmark: International Society for Professional Innovation Management ISPIM.

Jussila J, Aramo-Immonen H, Rouvari O, Porkka P, Ammirato S. 2016. Does Strategic and Innovative Fit Indicate Smart Social Media use in a Company?. In Proceedings of the 11th International Forum on Knowledge Asset Dynamics: Towards a New Architecture of Knowledge: Big Data, Culture and Creativity, Dresden -Germany 15-17 June 2016. Dresden. pp. 1973-1983.

Isotalo TJ, Niemi T. 2016. Dots-on-the-fly electron beam lithography. Bencher C, editor. In SPIE Proceedings: Alternative Lithographic Technologies VIII. SPIE. (Proceedings of SPIE). https://doi.org/10.1117/12.2219136

Kahle H, Phung H-M, Penttinen J-P, Rajala P, Tukiainen A, Ranta S, Guina M. 2019. Double-side pumped membrane external-cavity surface-emitting laser (MECSEL) with increased efficiency emitting > 3 W in the 780 nm region. In 2019 Conference on Lasers and Electro-Optics, CLEO 2019 - Proceedings. IEEE. https://doi.org/10.23919/CLEO.2019.8749958

Bolla P, Lohan E-S. 2018. Dual-frequency signal processing architecture for robust and precise positioning applications. In 2018 IEEE/ION Position, Location and Navigation Symposium, PLANS 2018. IEEE. pp. 72-80. https://doi.org/10.1109/PLANS.2018.8373367

Paloniitty M. 2016. Durability study on high speed water hydraulic miniature on/off-valve. In DFP16, Proceedings of the eighth workshop on digital fluid power, May 24-25, 2016, Tampere, Finland. Tampere. pp. 201-211.

Jokipii J, Suntio T. 2015. Dynamic characteristics of three-phase Z-source-based photovoltaic inverter with asymmetric impedance network. In 9th International Confernce on Power Electronics ECCE Asia (ICPE-ECCE Asia). IEEE. pp. 1976-1983. https://doi.org/10.1109/ICPE.2015.7168049

Stoykova E, Nazarova D, Berberova N, Gotchev A, Ivanov B, Mateev G. 2017. Dynamic laser speckle metrology with binarization of speckle patterns. In 19th International Conference and School on Quantum Electronics: Laser Physics and Applications. SPIE. (Proceedings of SPIE). https://doi.org/10.1117/12.2262330

Tiitola V, Korhonen T, Laine T, Lyly-Yrjänäinen J. 2019. Dynamics of value in technology inspired value co-creation: Case in homecare value network. In 14th IFKAD 2019 Proceedings: 5-7 June 2019, Matera, Italy. IKAM Centro Studi & Ricerche. (PROCEEDINGS IFKAD).

Mela K, Heinisuo M. 2014. Economical utilization of high strength steel: Welded slim floor box beams. In Eurosteel 2014 7th European conference on steel and composite structures.

Partanen T, Niemelä P, Mannila L, Poranen T. 2017. Educating Computer Science Educators Online - A Racket MOOC for Elementary Math Teachers of Finland. In Proceedings of the 9th International Conference on Computer Supported Education. SCITEPRESS - Science and Technology Publications. pp. 47-58. https://doi.org/10.5220/0006257800470058

Niemelä P, Di Flora C, Helevirta M, Isomöttönen V. 2016. Educating future coders with a holistic ICT curriculum and new learning solutions. In 7th International Multi-Conference on Complexity, Informatics and Cybernetics, IMCIC 2016 and 7th International Conference on Society and Information Technologies, ICSIT 2016. IIIS. pp. 132-136.

Kuula P, Leppänen M, Kolisoja P, Korkiala-Tanttu L, Sorvari J, Gustavsson H. 2018. Education on the utilization of secondary materials in earthworks. Lahtinen P, Raasakka V, editors. In Proceedings of the 10th International Conference on the Environmental and Technical Implications of Construction with Alternative Materials: No Gradle no Grave Circular Economy into practice. RIL - Finnish Association of Civil Engineers. pp. 177-187.

Aapro A, Messo T, Suntio T. 2015. Effect of active damping on the output impedance of PV inverter. In IEEE 16th Workshop on Control and Modeling for Power Electronics (COMPEL). https://doi.org/10.1109/COMPEL.2015.7236463

Suokas E. 2017. Effect of air gap on the adhesion of PET layer on cardboard substrate in extrusion coating. In 16th TAPPI European PLACE Conference 2017. TAPPI Press. pp. 529-544.

Viinamäki J, Jokipii J, Suntio T. 2015. Effect of Inductor Saturation on the Harmonic Currents of Grid-Connected Three-Phase VSI in PV Application. In 2015 9th International Conference on Power Electronics and ECCE Asia (ICPE-ECCE Asia), 1-5 June 2015, Seoul. IEEE. pp. 1209-1216. https://doi.org/10.1109/ICPE.2015.7167934

Vazquez Fernandez N, Isakov M, Hokka M, Kuokkala VT. 2018. Effects of adiabatic heating estimated from tensile tests with continuous heating. In Dynamic Behavior of Materials - Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics. Springer New York LLC. pp. 1-7. (Conference Proceedings of the Society for Experimental Mechanics). https://doi.org/10.1007/978-3-319-62956-8_1

Mardoukhi A, Hokka M, Kuokkala V-T. 2015. Effects of surface cracks and strain rate on the tensile behavior of Balmoral Red granite. In 11th International Conference on the Mechanical and Physical Behaviour of Materials Under Dynamic Loading. EDP Sciences.

Koskinen JA. 2015. E-learning of ethics, awareness, hacking and research by information security majors. In Proceedings of SEFI Annual Conferences. European Society for Engineering Education SEFI.

Lummi K, Rautiainen A, Järventausta P, Heine P, Lehtinen J, Hyvärinen M. 2016. Electricity Distribution Network Tariffs - Present Practices, Future Challenges and Development Possibilities. In CIRED Workshop 2016.

Laine K, Sipilä E, Anderson M, Sydänheimo L. 2016. Electronic Exam in Electronics Studies. In SEFI Annual Conference 2016: Engineering Education on Top of the Wolrd: Industry University Cooperation.

Viheriäkoski T, Kärjä E, Gärtner R, Tamminen P. 2017. Electrostatic discharge characteristics of conductive polymers. In Electrical Overstress/Electrostatic Discharge Symposium Proceedings 2017, EOS/ESD 2017. ESD Association.

Viheriäkoski T, Kokkonen M, Tamminen P, Karja E, Hillberg J, Smallwood J. 2014. Electrostatic Threats in Hospital Environment. In 2014 36TH Electrical overstress/electrostatic discharge symposium (EOS/ESD). IEEE COMPUTER SOC. (Electrical Overstress Electrostatic Discharge Symposium).

Niemelä P, Valmari A. 2018. Elementary math to close the digital skills gap. In CSEDU 2018 - Proceedings of the 10th International Conference on Computer Supported Education. SCITEPRESS. pp. 154-165. https://doi.org/10.5220/0006800201540165

Virkki J, Chen X, Björninen T, Ukkonen L. 2017. Embroidered antennas and antenna-electronics interfaces for wearable RFID tags. In IMWS-AMP 2017 International Microwave Workshop Series on Advanced Materials and Processes. IEEE. https://doi.org/10.1109/IMWS-AMP.2017.8247437

Andersson T, Boedeker M, Vuori V. 2017. Emotion-Gauge: Analyzing affective experiences in B2B customer journeys. Kavoura A, Sakas D, Tomaras P, editors. In Strategic Innovative Marketing : 5th IC-SIM, Athens, Greece, September 23-26, 2016. Springer. pp. 31-36. (Springer Proceedings in Business and Economics).

Juuti T, Pakkanen J, Lehtonen T. 2019. Empirical study of good, bad and ugly modular engineering solutions in machinery manufacturing industry. In Proceedings of the Design Society: International Conference on Engineering Design: The 22nd International Conference on Engineering Design, ICED19, Delft, The Netherlands, 5-8 August 2019. Cambridge University Press. pp. 2981-2990. (Proceedings of the Design Society: International Conference on Engineering Design ). https://doi.org/10.1017/dsi.2019.305

Viita J, Junnonen J-M. 2016. Empowerment in construction: a qualitative analysis of subcontractors' quality assurance. In Proceedings of the CIB World Building Congress 2016: Volume II - Environmental Opportunies and Challenges. Constructing Commitment and Acknowledging Human Experiences. Tampere University of Technology. Department of Civil Engineering. pp. 436-448.

Helander N, Okkonen J, Vuori V, Paavilainen N, Kujala J. 2016. Enablers and Restraints of Knowledge Work – Does profession make a difference?. In Towards a new architecture of knowledge : Big Data, culture and creativity: IFKAD 2016-11th International Forum on Knowledge Asset Dynamics, Dresden 15-17.6.2016, Germany. pp. 40-52.

Ikkala K, Lanz M, Kiviö J, Coatanéa E. 2015. Energy efficiency evaluation method for machine tools. In Flexible Automation and Intelligent Manufacturing 2015. The Choir Press. pp. 58-65.

Laine T, Suomala P, Saukkonen N. 2015. Engaging facts and feelings in management accounting practices. In IFKAD 2015 : 10th International Forum on Knowledge Asset Dynamics, Bari, Italy, June 10th-12th. Italy: Institute of Knowledge Asset Management & Arts for Business Institute. (International forum on knowledge asset dynamics).

Pyrhönen V-P. 2016. Enhancing old laboratory experiment using flipped learning: Towards self-regulating collaborative groups in blended learning environment. In SEFI conference 2016: Engineering Education on Top of the World: Industry University Cooperation.

Vaittinen E, Martinsuo M, Nenonen S. 2016. Enhancing the acceptance of advanced services among users of complex systems. Baines T, Harrison D, Zolkiewski J, editors. In Servitization: Shift, Transform, Grow: Proceedings of the Spring Servitization Conference, 16-17 May 2016 (SSC2016). pp. 162-170.

Tamminen P, Viheriäkoski T, Ukkonen L, Sydänheimo L. 2015. ESD and Disturbance Cases in Electrostatic Protected Areas. In Electrical Overstress / Electrostatic Discharge Symposium Proceedings 2015. USA: IEEE COMPUTER SOC. https://doi.org/10.1109/EOSESD.2015.7314792

Tamminen P, Sydänheimo L, Ukkonen L. 2014. ESD Sensitivity of 01005 Chip Resistors and Capacitors. In 2014 36TH Electrical Overstress/Electrostatic Discharge Symposium (EOS/ESD). IEEE COMPUTER SOC. (Electrical Overstress Electrostatic Discharge Symposium).

Einolander J. 2015. Evaluating organizational commitment in support of organizational leadership. In 6th International Conference on Applied Human Factors and Ergonomics (AHFE 2015) and the Affiliated Conferences, AHFE 2015. Elsevier. pp. 668–673. (Procedia Manufacturing). https://doi.org/10.1016/j.promfg.2015.07.300

Raunio J-P, Makela I, Mäntylä M, Ritala R. 2018. Evaluating the contrast of planar periodic patterns on paper. In Paper Conference and Trade Show, PaperCon 2018. TAPPI Press. pp. 294-302.

Mendes MR, Subramaniyam NP, Wendel-Mitoraj K. 2015. Evaluating the electrode measurement sensitivity of subdermal electroencephalography electrodes. In International IEEE/EMBS Conference on Neural Engineering, NER. IEEE COMPUTER SOCIETY PRESS. pp. 1092-1095. https://doi.org/10.1109/NER.2015.7146818

Kart U, Kämäräinen JK, Fan L, Gabbouj M. 2018. Evaluation of visual object trackers on equirectangular panorama. In VISIGRAPP 2018 - Proceedings of the 13th International Joint Conference on Computer Vision, Imaging and Computer Graphics Theory and Applications . SCITEPRESS. pp. 25-32. https://doi.org/10.5220/0006526200250032

Holopainen S. 2016. Evolution equations based approach for modeling of fatigue in amorphous glassy polymers. On the investigation of fatigue damage development in polycarbonate. Papadrakakis M, Papadopoulos V, Stefanou G, Plevris V, editors. In Proc. of VII European Congress on Computational Methods in Applied Sciences and Engineering , ECCOMAS Congress 2016. : M. Papadrakakis, V. Papadopoulos, G. Stefanou, V. Plevris (eds.) . Crete Island, Greece, 5 – 10 June 2016. pp. 6675-6687. https://doi.org/10.7712/100016.2289.11047

Mäkitalo-Keinonen T, Aarikka-Stenroos L. 2015. Examining Innovation Barriers along Innovation Process in Multi-Industry Hygiene-Technology Network. In The Proceedings of the XXVI ISPIM Conference 2015 Budapest, Hungary . Denmark: International Society for Professional Innovation Management ISPIM.

Kelo T, Eronen J. 2017. Experiences from development of security audit criteria. In Proceedings of the 16th European Conference on Cyber Warfare and Security, ECCWS 2017. TAPPI Press; Curran Associates, Inc. pp. 208-215.

Naumenko VV, Solodovnik VF, Totsky AV, Zelensky AA, Astola JT. 2015. Experimental study of bispectrum-based encoding in radio communication system. In 2015 International Conference on Antenna Theory and Techniques: Dedicated to 95 Year Jubilee of Prof. Yakov S. Shifrin, ICATT 2015 - Proceedings. The Institute of Electrical and Electronics Engineers, Inc. https://doi.org/10.1109/ICATT.2015.7136853

Tosi D, Lenarduzzi V, Morasca S, Taibi D. 2017. Experimenting traditional and modern reliability models in a 3-years european software project. In Proceedings of the 11th European Conference on Information Systems Management, ECISM 2017. Academic Conferences and Publishing International Limited. pp. 304-314.

Chaudhary S, Zhao Y, Berki E, Valtanen J, Li L, Helenius M, Mystakidis S, Nalam T, Thapa RB. 2015. Exploring Attitudes, Knowledge and Competencies for Security Technology: A Cross-Cultural Survey in Higher Education. In 8th International Conference on ICT, Society and Human Beings 2015. pp. 11-18.

Mäkinen SJ, Dedehayir O, Ortt R. 2015. Exploring effects of ecosystem clockspeed on product performance. In IEEE International Conference on Industrial Engineering and Engineering Management. IEEE COMPUTER SOCIETY PRESS. pp. 1457-1461. https://doi.org/10.1109/IEEM.2014.7058880

Saari UA, Mäkinen SJ. 2016. Exploring how brand experience measurement could be used for integrating marketing and R&D. In XXVII ISPIM Innovation Conference 2016: Porto, 19-22 June, 2016.

Hynynen A. 2016. Extending Professional Fields. Architectural Research and Regional Development. Kähkönen K, Keinänen M, editors. In Proceedings of the CIB World Building Congress 2016.: Volume I - Creating built environments of new opportunities. Tampere University of Technology. Department of Civil Engineering. pp. 372-383.

Närhi M, Genty G, Steinmeyer G, Sand J, Orsila L. 2015. Extreme Nonlinear Signal Amplification. In 2015 European Conference on Lasers and Electro-Optics - European Quantum Electronics Conference. OSA.

Niu L, Suominen O, M. Aref M, Mattila J, Ruiz E, Esque S. 2018. Eye-in-Hand Manipulation for Remote Handling: Experimental Setup. In International Conference on Robotics and Mechantronics : (ICRoM 2017). IOP Publishing Ltd. (IOP conference series : materials science and engineering). https://doi.org/10.1088/1757-899X/320/1/012007

Perttula A. 2017. Eye tracking studies focusing on mathematics: a literature review. In INTED2017. The 11th annual International Technology, Education and Development Conference: Valencia, 6th - 8th of March, 2017.. IATED Academy. https://doi.org/10.21125/inted.2017.0639

Zia N, Viheriälä J, Koskinen R, Koskinen M, Suomalainen S, Guina M. 2016. Fabrication and characterization of broadband superluminescent diodes for 2 μm wavelength. In Light-Emitting Diodes: Materials, Devices, and Applications for Solid State Lighting XX. SPIE. (Proceedings of SPIE). https://doi.org/10.1117/12.2209720

Chen X, He H, Ukkonen L, Virkki J, Xu J, Wang T, Cheng L. 2018. Fabrication and Practical Evaluation of Glove-integrated Passive UHF RFID Tags. In 2018 IEEE International Conference on RFID Technology Application (RFID-TA). IEEE. https://doi.org/10.1109/RFID-TA.2018.8552814

Chen X, He H, Ukkonen L, Virkki J, Lu Y, Lam H. 2018. Fabrication and reliability evaluation of passive UHF RFID T-shirts. In 2018 IEEE International Workshop on Antenna Technology, iWAT2018 - Proceedings. IEEE. pp. 1-4. https://doi.org/10.1109/IWAT.2018.8379146

Siivonen L, Linjama M, Huova M, Försterling H, Stamm E, Deubel T. 2015. Fault Tolerance of Digital Hydraulics in High Dynamic Hydraulic System. In The Fourteenth Scandinavian International Conference on Fluid Power. 1 ed. Tampere, Finland.

Ometov A, Masek P, Malina L, Florea R, Hosek J, Andreev S, Hajny J, Niutanen J, Koucheryavy Y. 2016. Feasibility characterization of cryptographic primitives for constrained (wearable) IoT devices. In 2016 IEEE International Conference on Pervasive Computing and Communication Workshops, PerCom Workshops 2016. IEEE. https://doi.org/10.1109/PERCOMW.2016.7457161

Petrov V. 2015. Feasibility study of the THz band for communications between wearable electronics. In 2015 17th Conference of Open Innovations Association (FRUCT), 20-24 April 2015, Yaroslavl. . IEEE. pp. 157-162. (Conference of Open Innovations Association (FRUCT)). https://doi.org/10.1109/FRUCT.2015.7117987

Tamminen P, Viheriäkoski T, Reinvuo T, Sydänheimo L, Ukkonen L. 2014. Field Collapse Event ESD Test Method. In 2014 36TH Electrical overstress/electrostatic discharge symposium (EOS/ESD). IEEE COMPUTER SOC. (Electrical Overstress Electrostatic Discharge Symposium).

Takala A, Korhonen-Yrjänheikki K. 2016. Finnish Engineering Education for Sustainable Development in 2016 - Call for collaborative learning. In SEFI 2016 Annual Conference Proceedings: Engineering Education on Top of the World: Industry University Cooperation. European Society for Engineering Education SEFI.

Lietzen J, Kylliäinen M. 2018. Finnish Round Robin Test on Airborne Sound Insulation. In Proceedings of the 11th European Congress and Exposition on Noise Control Engineering, Euronoise 2018, May 27-31 2018, Hersonissos, Crete, Greece: Reduce Noise to Improve Life. Hersonissos, Crete, Greece: European Acoustic Association EAA. pp. 1677-1682. (European Congress and Exposition on Noise Control Engineering).

Abdallah Z, Stefszky M, Ulvila V, Silberhorn C, Vainio M. 2019. Frequency Comb Generation in a Continuous-Wave Pumped Second-Order Nonlinear Waveguide Resonator. In 2019 Conference on Lasers and Electro-Optics, CLEO 2019 - Proceedings. IEEE. https://doi.org/10.23919/CLEO.2019.8750403

Kantola E, Penttinen J-P, Leinonen T, Ranta S, Guina M. 2018. Frequency-doubled VECSEL employing a Volume Bragg Grating for linewidth narrowing. In CLEO: Applications and Technology, CLEO_AT 2018. OSA - The Optical Society. https://doi.org/10.1364/CLEO_AT.2018.JTu2A.17

Kantola E, Leinonen T, Rantamäki A, Guina M, Sirbu A, Iakovlev V. 2018. Frequency-doubled wafer-fused 638 nm VECSEL with an output power of 5.6 W. In CLEO: Applications and Technology, CLEO_AT 2018. OSA - The Optical Society. https://doi.org/10.1364/CLEO_AT.2018.JTu2A.10

Taibi D, Systä K. 2019. From monolithic systems to microservices: A decomposition framework based on process mining. Ferguson D, Munoz VM, Helfert M, Pahl C, editors. In CLOSER 2019 - Proceedings of the 9th International Conference on Cloud Computing and Services Science. SCITEPRESS. pp. 153-164. https://doi.org/10.5220/0007755901530164

Kiili K. 2017. From theories to game mechanics: Developing a game for training rational numbers. In Proceedings of the 11th European Conference on Games Based Learning, ECGBL 2017. Academic Conferences and Publishing International Limited. pp. 328-334.

Smith J, Kuokkala V-T, Seidt J, Gilat A. 2016. Full-Field Temperature and Strain Measurement in Dynamic Tension Tests on SS 304. In Dynamic Behavior of Materials, Volume 1: Proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics. Springer International Publishing. pp. 37-44. (Conference proceedings of the Society for Experimental Mechanics). https://doi.org/10.1007/978-3-319-41132-3_6

Pluduma L, Freimanis E, Gross K, Koivuluoto H, Algate K, Haynes D, Vuoristo P. 2016. Functionalizing Surface Electrical Potential of Hydroxyapatite Coatings. In 11th International Conference Medical Applications of Novel Biomaterials and Nanotechnology. pp. 12-17. (Advances in Science and Technology).

Backas J, Ghabcheloo R, Huhtala K. 2015. Gain Scheduling Full State Feedback with D-Implementation for Velocity Tracking of Hydrostatic Drive Transmission. In Proceedings of the Fourteenth Scandinavian International Conference on Fluid Power, SICFP15. May 20-22, 2015. Tampere, Finland. Tampere University of Technology. Department of Intelligent Hydraulics and Automation. pp. 64-75.

Perttula A, Tuomi P. 2017. Gamification at School. In EDULEARN17: The 9th International Conference on Education and New Learning Technologies. pp. 9334-9340. https://doi.org/10.21125/edulearn.2017.0756

Eriksson S-L, Orelma H, Vuojamo V. 2015. Generalized hyperbolic harmonic functions in the plane. In Proceedings of the International Conference on Numerical Analysis and Applied Mathematics 2014 (ICNAAM-2014). American Institute of Physics Inc. https://doi.org/10.1063/1.4912658

Messo T, Aapro A, Suntio T. 2015. Generalized multivariable small-signal model of three-phase grid-connected inverter in DQ-domain. In IEEE 16th Workshop on Control and Modeling for Power Electronics (COMPEL). IEEE. https://doi.org/10.1109/COMPEL.2015.7236460

Stankovic RS, Astola J, Moraga C. 2018. Gibbs Dyadic Differentiation on Groups - Evolution of the Concept. In Computer Aided Systems Theory – EUROCAST 2017 - 16th International Conference, Revised Selected Papers. Springer Verlag. pp. 229-237. (Lecture Notes in Computer Science). https://doi.org/10.1007/978-3-319-74727-9_27

Ahmed S, Musfequr Rehman SM, Ukkonen L, Björninen T. 2018. Glove-integrated slotted patch antenna for wearable UHF RFID reader. In 2018 IEEE International Conference on RFID Technology & Application (RFID-TA). IEEE. https://doi.org/10.1109/RFID-TA.2018.8552817

Christophe F, Wang M, Coatanea E, Zeng Y, Bernard A. 2012. Grammatical and Semantic Disambiguation of Requirements at Elicitation and Representation Stages. In Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering, 2011, vol 9. AMER SOC MECHANICAL ENGINEERS. pp. 17-31.

Ledentsov NN, Shchukin VA, Lyytikäinen J, Okhotnikov O, Cherkashin NA, Shernyakov YM, Payusov AS, Gordeev NY, Maximov MV, Schlichting S, Nippert F, Hoffmann A. 2015. Green (In,Ga,Al)P-GaP light-emitting diodes grown on high-index GaAs surfaces. In Proceedings of SPIE: Light-Emitting Diodes: Materials, Devices, and Applications for Solid State Lighting XIX. SPIE. https://doi.org/10.1117/12.2083953

Leinonen T, Penttinen JP, Korpijärvi VM, Kantola E, Guina M. 2015. >8W GaInNAs VECSEL emitting at 615 nm. In Proceedings of SPIE: Vertical External Cavity Surface Emitting Lasers (VECSELs) V. SPIE. https://doi.org/10.1117/12.2079162

Järvenpää E, Lanz M. 2015. Guidelines for Designing Human-friendly User Interfaces for Factory Floor Manufacturing Operators. In Advances in Production Management Systems: Innovative Production Management Towards Sustainable Growth: IFIP WG 5.7 International Conference, APMS 2015, Tokyo, Japan, September 7-9, 2015, Proceedings, Part II. Springer International Publishing. pp. 531-538. (IFIP Advances in Information and Communication Technology). https://doi.org/10.1007/978-3-319-22759-7_61

Komar M, Edelev S, Koucheryavy Y. 2016. Handheld wireless authentication key and secure documents storage for the Internet of Everything. In Proceedings of the 18th Conference of Open Innovations Association FRUCT and Seminar on Information Security and Protection of Information Technolog, FRUCT-ISPIT 2016. IEEE COMPUTER SOCIETY PRESS. pp. 120-130. https://doi.org/10.1109/FRUCT-ISPIT.2016.7561517

Kulmala A, Repo S. 2016. Handling exceptional situations in a distribution network congestion management algorithm. In CIRED Workshop 2016. Helsinki, Finland. https://doi.org/10.1049/cp.2016.0663

Roncero-Sanchez P, Acha E. 2015. Harmonic and Imbalance Voltage Mitigation in Smart Grids: A DSTATCOM Based Solution. In IEEE EUROCON 2015. https://doi.org/10.1109/EUROCON.2015.7313751

Zare A, Sreedhar KK, Vadakital VKM, Aminlou A, Hannuksela MM, Gabbouj M. 2017. HEVC-compliant viewport-adaptive streaming of stereoscopic panoramic video. In 2016 Picture Coding Symposium, PCS 2016. IEEE. https://doi.org/10.1109/PCS.2016.7906401

Yancheshmeh FS, Chen K, Kämäräinen J-K. 2018. Hierarchical deformable part models for heads and tails. In VISIGRAPP 2018 - Proceedings of the 13th International Joint Conference on Computer Vision, Imaging and Computer Graphics Theory and Applications . SCITEPRESS. pp. 45-55. https://doi.org/10.5220/0006532700450055

Närhi M, Tengvall M, Toivonen J, Dudley JM, Genty G. 2016. High Dynamic Range Single-Shot Spectral Measurements of Spontaneous Modulation Instability. In Frontiers in Optics 2016. Optical Society of America (OSA).

Mateos X, Loiko P, Lamrini S, Scholle K, Fuhrberg P, Suomalainen S, Härkönen A, Guina M, Vatnik S, Vedin I, Aguiló M, Diáz F, Wang Y, Griebner U, Petrov V. 2018. Highly-efficient Ho:KY(WO4)2 thin-disk lasers at 2.06 μm. In Pacific-Rim Laser Damage 2018: Optical Materials for High-Power Lasers. SPIE, IEEE. (Proceedings of SPIE). https://doi.org/10.1117/12.2316822

Zia N, Viheriälä J, Koivusalo E, Aho A, Suomalainen S, Guina M. 2018. High performance GaSb superluminescent diodes for tunable light source at 2 μm and 2.55 μm. In CLEO: Applications and Technology, CLEO_AT 2018. OSA - The Optical Society. https://doi.org/10.1364/CLEO_AT.2018.JTu2A.28

Viheriälä J, Aho AT, Mäkelä J, Salmi J, Virtanen H, Leinonen T, Dumitrescu M, Guina M. 2016. High-power 1550 nm tapered DBR lasers fabricated using soft UV-nanoimprint lithography. In High-Power Diode Laser Technology and Applications XIV. SPIE. (SPIE Conference Proceedings). https://doi.org/10.1117/12.2207423

Penttinen J-P, Leinonen T, Korpijärvi V-M, Kantola E, Guina M. 2015. High power GaInNAs VECSEL emitting at 1230/615 nm. In The European Conference on Lasers and Electro-Optics 2015. OSA.

Fedotov A, Noronen T, Rissanen J, Gumenyuk R, Petrov A, Chamorovskii Y, Golant K, Odnoblyudov M, Filippov V. 2018. High power picosecond MOPA with anisotropic ytterbium-doped tapered double-clad fiber. Taccheo S, Mackenzie JI, Ferrari M, editors. In Proceedings of SPIE : Fiber Lasers and Glass Photonics: Materials through Applications. SPIE-INT SOC OPTICAL ENGINEERING. (Proceedings of SPIE). https://doi.org/10.1117/12.2307693

Saad-Bin-Alam M, Reshef O, Huttunen MJ, Carlow G, Sullivan B, Menard JM, Dolgaleva K, Boyd RW. 2019. High-Q resonance train in a plasmonic metasurface. In 2019 Conference on Lasers and Electro-Optics, CLEO 2019 - Proceedings. IEEE. https://doi.org/10.23919/CLEO.2019.8750206

Nikkinen J, Korpijärvi V-M, Leino I, Härkönen A, Guina M. 2015. High repetition rate 1.34 µm Nd:YVO4 microchip laser Q-switched with GaInNAs SESAM. In The European Conference on Lasers and Electro-Optics 2015. OSA.

Brobbey KJ, Haapanen J, Gunell M, Mäkelä JM, Eerola E, Saarinen JJ, Toivakka M. 2018. High-speed manufacturing of antimicrobial paper. In Paper Conference and Trade Show, PaperCon 2018. TAPPI Press. pp. 564-566.

Hokka M, Östman K, Rämö J, Kuokkala VT. 2015. High Temperature Tension HSB Device Based on Direct Electrical Heating. Song B, Casem D, Kimberley J, editors. In Dynamic Behavior of Materials, Volume 1: Proceedings of the 2014 Annual Conference on Experimental and Applied Mechanics. Springer. pp. 227-233. (Conference Proceedings of the Society for Experimental Mechanics Series). https://doi.org/10.1007/978-3-319-06995-1_34

Silverajan B, Vajaranta M, Kolehmainen A. 2016. Home Network Security: Modelling Power Consumption to Detect and Prevent Attacks on Homenet Routers. In Proceedings of the 11th Asia Joint Conference on Information Security (AsiaJCIS 2016), Fukuoka, Japan, August 4-5, 2016. IEEE. pp. 9-16. https://doi.org/10.1109/AsiaJCIS.2016.10

Sandström N, Hytti V, Nenonen S, Lonka K. 2016. How is it sustainable? Identifying key indicators for sustainable educational design. Gómes Chova L, López Martínez A, Candel Torres I, editors. In 10th INTED 2016 Conference Proceedings: 7-9 March, 2016, Valencia, Spain. pp. 4217-4219. (INTED proceedings). https://doi.org/10.21125/inted.2016.2037

Baldauf C, Ropo M, Blum V, Scheffler M. 2014. How mono-valent cations bend peptide turns and a first-principles database of amino acids and dipeptides. Simos TE, Kalogiratou Z, Monovasilis T, editors. In International Conference of Computational Methods in Sciences and Engineering 2014 (ICCMSE 2014). American Institute of Physics Inc. pp. 119-120. (AIP Conference Proceedings). https://doi.org/10.1063/1.4897692

Juuti T, Kopra MJ, Rättyä K, Lehtonen T. 2016. How to benefit from learning logs in engineering education?. In 44th Annual Conference of the European Society for Engineering Education - Engineering Education on Top of the World: Industry-University Cooperation, SEFI 2016. European Society for Engineering Education SEFI.

Aarikka-Stenroos L, Boedeker S, Köppä L, Langwaldt J. 2016. How to develop a new innovation education tool: case of impact canvas. In In the Proceedings of ISPIM Innovation Summit. The International Society for Professional Innovation Management (ISPIM). : 4-7 December 2016, Kuala Lumpur, Malaysia..

Tappura S, Nenonen N, Kivistö-Rahnasto J. 2015. How to support managers’ commitment to safety management and leadership in organizations: good practices from the managers’ viewpoint. In WOS 8th international conference - Book of Abstracts .

Rubel O, Ponomarenko N, Lukin V, Astola J, Egiazarian K. 2015. HVS-based local analysis of denoising efficiency for DCT-based filters. In 2015 2nd International Scientific-Practical Conference Problems of Infocommunications Science and Technology, PIC S and T 2015 - Conference Proceedings. IEEE. pp. 189-192. https://doi.org/10.1109/INFOCOMMST.2015.7357309

Tuhtan JA, Strokina N, Toming G, Muhammad N, Kruusmaa M, Kämäräinen J-K. 2015. Hydrodynamic Classification of Natural Flows Using an Artificial Lateral Line and Frequency Domain Features. In 36th IAHR World Congress.

Vasell T, Vuolle M, Petrulaitiene V, Nenonen S, Jylhä T. 2016. Identifying and measuring customer value - case multi-locational worker. Nielsen S, Jensen PA, editors. In Research papers for EuroFM's 15th research symposium at EFMC2016: 8-9 June 2016 in Milan, Italy. EuroFM. pp. 143-151.