Santa-aho, S., Laitinen, A., Sorsa, A., & Vippola, M. (2019). Barkhausen Noise Probes and Modelling: A Review. Journal of Nondestructive Evaluation, 38(4), [94]. https://doi.org/10.1007/s10921-019-0636-z

Coatanéa, E., Ritola, T., Tumer, I. Y., & Jensen, D. (2010). A framework for building behavioral models for design-stage failure identification using dimensional analysis. In Proceedings of the ASME Design Engineering Technical Conference (Vol. 5, pp. 591-601). AMER SOC MECHANICAL ENGINEERS. https://doi.org/10.1115/DETC2010-28864

Saintsing, C. D., Cook, B. S., & Tentzeris, M. M. (2014). An origami inspired reconfigurable spiral antenna. In 38th Mechanisms and Robotics Conference (Vol. 5B). The American Society of Mechanical Engineers ASME. https://doi.org/10.1115/DETC201435353

Pyrhönen, V-P., Koivisto, H., & Vilkko, M. (2017). A Reduced-Order Two-Degree-of-Freedom Composite Nonlinear Feedback Control for a Rotary DC Servo Motor. In Proceedings of the 56th IEEE Conference on Decision and Control (pp. 2065-2071). Melbourne, Australia. https://doi.org/10.1109/CDC.2017.8263951

Caraffi, C., Vojir, T., Trefný, J., Šochman, J., & Matas, J. (2012). A system for real-time detection and tracking of vehicles from a single car-mounted camera. In 2012 15th International IEEE Conference on Intelligent Transportation Systems, ITSC 2012 (pp. 975-982). [6338748] https://doi.org/10.1109/ITSC.2012.6338748

Yang, D., Feng, Y., Behl, M., Lendlein, A., Zhao, H., Khan, M., & Guo, J. (2012). Biomimetic hemo-compatible surfaces of polyurethane by grafting copolymer brushes of poly(ethylene glycol) and poly(phosphorylcholine methacrylate). In Multifunctional Polymer-Based Materials (Vol. 1403, pp. 171-176) https://doi.org/10.1557/opl.2012.702

Borah, D., Rasappa, S., Kosmala, B., Holmes, J. D., & Morris, M. A. (2012). Block copolymer self-assembly on ethylene glycol (EG) self-assembled monolayer (SAM) for nanofabrication. In Nanoscale Materials Modification by Photon, Ion, and Electron Beams (Vol. 1450, pp. 8-13) https://doi.org/10.1557/opl.2012.1224

Martinez, F., Neculqueo, G., Vasquez, S. O., Lemmetyinen, H., Efimov, A., & Vivo, P. (2015). Branched thiophene oligomer/polymer bulk heterojunction organic solar cell. In Materials Research Society Symposium Proceedings (Vol. 1737, pp. 19-25). MATERIALS RESEARCH SOCIETY. https://doi.org/10.1557/opl.2015.529

Ghabcheloo, R., & Siddiqui, S. (2018). Complete Odometry Estimation of a Vehicle Using Single Automotive Radar and a Gyroscope. In MED 2018 - 26th Mediterranean Conference on Control and Automation (pp. 855-860). [8442474] IEEE. https://doi.org/10.1109/MED.2018.8442474

Di Vito, D., Mosallaei, M., Vahed, B. K., Kanerva, M., & Mäntysalo, M. (2020). Deformability analysis and improvement in stretchable electronics systems through finite element analysis. In A. Carcaterra, G. Graziani, & A. Paolone (Eds.), Proceedings of XXIV AIMETA Conference 2019 (pp. 755-763). (Lecture Notes in Mechanical Engineering). Springer. https://doi.org/10.1007/978-3-030-41057-5_61

Cao, X., Aref, M. M., & Mattila, J. (2019). Design and Control of a Flexible Joint as a Hydraulic Series Elastic Actuator for Manipulation Applications. In Proceedings of the IEEE 2019 9th International Conference on Cybernetics and Intelligent Systems and Robotics, Automation and Mechatronics, CIS and RAM 2019 (pp. 553-558). [9095773] (IEEE International Conference on Cybernetics and Intelligent Systems). IEEE. https://doi.org/10.1109/CIS-RAM47153.2019.9095773

Hartikainen, J., Kolari, K., & Kouhia, R. (2016). Development and numerical implementation of an anisotropic continuum damage model for concrete. In Advances in Fracture and Damage Mechanics XV (pp. 115-118). (Key Engineering Materials; Vol. 713). Trans Tech Publications Ltd. https://doi.org/10.4028/www.scientific.net/KEM.713.115

Hokka, M., Mirow, N., Nagel, H., Vogt, S., & Kuokkala, V-T. (2016). DIC measurements of the human heart during cardiopulmonary bypass surgery. In Conference Proceedings of the Society for Experimental Mechanics Series (Vol. 6, pp. 51-59). Springer New York LLC. https://doi.org/10.1007/978-3-319-21455-9_6

Soltani, A., Curtze, S., Lahti, J., Järvelä, K., Laurikka, J., Hokka, M., & Kuokkala, V. T. (2018). Digital image correlation study of the deformation and functioning of the human heart during open-heart surgery. In Mechanics of Biological Systems, Materials and other topics in Experimental and Applied Mechanics - Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics (Vol. 4, pp. 19-27). (Conference Proceedings of the Society for Experimental Mechanics). Springer New York LLC. https://doi.org/10.1007/978-3-319-63552-1_4

Wu, D., Coatanea, E., & Wang, G. G. (2017). Dimension reduction and decomposition using causal graph and qualitative analysis for aircraft concept design optimization. In 43rd Design Automation Conference The American Society of Mechanical Engineers ASME. https://doi.org/10.1115/DETC201767601

Rossi, M., Liegmann, E., Karamanakos, P., Castelli-Dezza, F., & Kennel, R. (2019). Direct model predictive power control of a series-connected modular rectifier. In PRECEDE 2019: 2019 IEEE International Symposium on Predictive Control of Electrical Drives and Power Electronics (pp. 1-6). IEEE. https://doi.org/10.1109/PRECEDE.2019.8753318

Suokas, E. (2017). Effect of air gap on the adhesion of PET layer on cardboard substrate in extrusion coating. In 16th TAPPI European PLACE Conference 2017 (pp. 529-544). TAPPI Press.

Suokas, E. (2019). Effect of polyolefin molecular structure on product properties in extrusion coating. In 17th Biennial TAPPI European PLACE Conference 2019 (pp. 89-98). TAPPI Press.

Vähä-Nissi, M., Hirvikorpi, T., Sievänen, J., Salo, E., Harlin, A., Johansson, P., & Kuusipalo, J. (2011). Effect of pre-treatments on barrier properties of layers applied by atomic layer deposition onto polymer-coated substrates. In 13th European PLACE Conference 2011 (Vol. 1, pp. 447)

Rasilo, P., Belahcen, A., & Arkkio, A. (2012). Effect of rotor pole-shoe construction on losses of inverter-fed synchronous motors. In Proceedings - 2012 20th International Conference on Electrical Machines, ICEM 2012 (pp. 1282-1286) https://doi.org/10.1109/ICElMach.2012.6350042

Vazquez Fernandez, N., Isakov, M., Hokka, M., & Kuokkala, V. T. (2018). Effects of adiabatic heating estimated from tensile tests with continuous heating. In Dynamic Behavior of Materials - Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics (Vol. 1, pp. 1-7). (Conference Proceedings of the Society for Experimental Mechanics). Springer New York LLC. https://doi.org/10.1007/978-3-319-62956-8_1

Mäkinen, J., Fränti, K., Korhonen, M., Fillion, J., & Heinisuo, M. (2016). End-plate connections in Bi-axial bending - Measurements. In F. M. Mazzolani, A. Squillace, B. Faggiano, & F. Bellucci (Eds.), 13th International Aluminium Conference, Sustainability, Durability and Structural Advantages, : INALCO 2016; Naples; Italy; 21 September 2016 through 23 September 2016 (Vol. 710, pp. 275-280). (Key Engineering Materials; Vol. 710). Trans Tech Publications Ltd. https://doi.org/10.4028/www.scientific.net/KEM.710.275

Mendes, M. R., Subramaniyam, N. P., & Wendel-Mitoraj, K. (2015). Evaluating the electrode measurement sensitivity of subdermal electroencephalography electrodes. In International IEEE/EMBS Conference on Neural Engineering, NER (Vol. 2015-July, pp. 1092-1095). IEEE COMPUTER SOCIETY PRESS. https://doi.org/10.1109/NER.2015.7146818

Medyna, G., Coatanea, E., & Millet, D. (2011). Evaluation of parts of a boat cabin based on exergy - Focusing on environmental and economic assessments. In ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011 (PARTS A AND B ed., Vol. 4, pp. 1083-1092). AMER SOC MECHANICAL ENGINEERS.

Koivikko, A., & Sariola, V. (2019). Fabrication of soft devices with buried fluid channels by using sacrificial 3D printed molds. In 2019 2nd IEEE International Conference on Soft Robotics (RoboSoft) (pp. 509-513). IEEE. https://doi.org/10.1109/ROBOSOFT.2019.8722741

Far, M. F., Mustafa, B., Martin, F., Rasilo, P., & Belahcen, A. (2018). Flux-Weakening Control for IPMSM Employing Model Order Reduction. In 2018 23rd International Conference on Electrical Machines, ICEM 2018 (pp. 1510-1516). IEEE. https://doi.org/10.1109/ICELMACH.2018.8506693

Mäenpää, P., Aref, M. M., & Mattila, J. (2019). FORMI: A Fast Holonomic Path Planning and Obstacle Representation Method Based on Interval Analysis. In Proceedings of the IEEE 2019 9th International Conference on Cybernetics and Intelligent Systems and Robotics, Automation and Mechatronics, CIS and RAM 2019 (pp. 398-403). (IEEE International Conference on Cybernetics and Intelligent Systems). IEEE. https://doi.org/10.1109/CIS-RAM47153.2019.9095822

Ellman, A., Wendrich, R., & Tiainen, T. (2016). Framework and feasibility study for pairwise comparison tool. In Proceedings of the ASME 2016 Computers and Information in Engineering Conference IDETC/CIE 2016 [DETC2016-59886] Charlotte, North Carolina: ASME. https://doi.org/10.1115/DETC2016-59886

Coatanéa, E., Nonsiri, S., Christophe, F., & Mokammel, F. (2014). Graph based representation and analyses for conceptual stages. In 34th Computers and Information in Engineering Conference (Vol. 1A). The American Society of Mechanical Engineers ASME. https://doi.org/10.1115/DETC201435652

Mikkonen, A., & Karvinen, R. (2017). Heat Transfer of Impinging Jet: Effect of Compressibility and Turbulent Kinetic Energy Production. In IX International Conference on Computational Heat and Mass Transfer (ICCHMT 2016)

Hokka, M., Östman, K., Rämö, J., & Kuokkala, V. T. (2015). High Temperature Tension HSB Device Based on Direct Electrical Heating. In B. Song, D. Casem, & J. Kimberley (Eds.), Dynamic Behavior of Materials, Volume 1: Proceedings of the 2014 Annual Conference on Experimental and Applied Mechanics (Vol. 65, pp. 227-233). (Conference Proceedings of the Society for Experimental Mechanics Series). Springer. https://doi.org/10.1007/978-3-319-06995-1_34

Lahtinen, K., Lahti, J., Johansson, P., Seppänen, T., & Cameron, D. C. (2013). Improving the effect of a nanoscale barrier coating on BOPP film properties by surface pretreatments. In 14th European PLACE Conference 2013 (Vol. 1, pp. 469-493). TAPPI Press.

Lahti, J., Johansson, P., Lahtinen, K., Cameron, D. C., & Seppänen, T. (2014). Improving the effect of nanoscale barrier coating on BOPP film properties: Influence of substrate contamination, web handling and pretreatments. In TAPPI PLACE Conference 2014 (Vol. 2, pp. 1039-1061). TAPPI Press.

Mäkinen, P., Mononen, T., & Mattila, J. (2018). Inertial Sensor-Based State Estimation of Flexible Links Subject to Bending and Torsion. In 2018 14th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications, MESA 2018 [8449188] IEEE. https://doi.org/10.1109/MESA.2018.8449188

Singh, A. K., Ahonen, A., Ghabcheloo, R., & Mueller, A. (2020). Introducing Multi-Convexity in Path Constrained Trajectory Optimization for Mobile Manipulators. In European Control Conference 2020, ECC 2020 (pp. 1178-1185). IEEE.

Coatanéa, E., Wu, D., Tsarkov, V., Gary Wang, G., Modi, S., & Jafarian, H. (2018). Knowledge-based artificial neural network (KB-ANN) in engineering: Associating functional architecture modeling, dimensional analysis and causal graphs to produce optimized topologies for KB-ANNs. In 38th Computers and Information in Engineering Conference (Vol. 1B-2018). The American Society of Mechanical Engineers ASME. https://doi.org/10.1115/DETC201885895

Palagi, S., Mark, A. G., Melde, K., Qiu, T., Zeng, H., Parmeggiani, C., ... Fischer, P. (2017). Locomotion of light-driven soft microrobots through a hydrogel via local melting. In International Conference on Manipulation, Automation and Robotics at Small Scales, MARSS 2017 - Proceedings IEEE. https://doi.org/10.1109/MARSS.2017.8001916

Lahti, J. (2019). Market implementation of active and intelligent packaging-opportunities from a socio-economic perspective. In 17th Biennial TAPPI European PLACE Conference 2019 (pp. 419-427). TAPPI Press.

Ronkainen, H., Kanerva, U., Varis, T., Ruusuvuori, K., Turunen, E., Peräntie, J., ... Jantunen, H. (2013). Materials for electronics by thermal spraying. In Physical and Numerical Simulation of Materials Processing VII (Vol. 762, pp. 451-456). (Materials Science Forum; Vol. 762). https://doi.org/10.4028/www.scientific.net/MSF.762.451

Pylkkänen, K., Nurmikolu, A., Guthrie, W. S., & Argyle, H. M. (2015). Measurements and Modeling of Frost Depth in Railway Tracks. In Proceedings of the International Conference on Cold Regions Engineering: 16th International Conference on Cold Regions Engineering 2015 (pp. 123-134). American Society of Civil Engineers ASCE. https://doi.org/10.1061/9780784479315.012

Coatanéa, E., Yannou, B., Honkala, S., Lajunen, A., Saarelainen, T., & Makkonen, P. (2008). Measurement theory and dimensional analysis: Methodological impact on the comparison and evaluation process. In 19th International Conference on Design Theory and Methodology and 1st International Conference on Micro and Nano Systems, presented at - 2007 ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2007 (pp. 173-182). AMER SOC MECHANICAL ENGINEERS. https://doi.org/10.1115/DETC2007-34364

Liikanen, H., Aref, M. M., & Mattila, J. (2019). M-Estimator Application in Real-Time Sensor Fusion for Smooth Position Feedback of Heavy-Duty Field Robots. In Proceedings of the IEEE 2019 9th International Conference on Cybernetics and Intelligent Systems (CIS) and IEEE Conference on Robotics, Automation and Mechatronics (RAM) (pp. 368-373). (IEEE International Conference on Cybernetics and Intelligent Systems). IEEE. https://doi.org/10.1109/CIS-RAM47153.2019.9095821

Alatalo, M., Pitkänen, H., Ropo, M., Kokko, K., & Vitos, L. (2013). Modeling of steels and steel surfaces using quantum mechanical first principles methods. In Physical and Numerical Simulation of Materials Processing VII (Vol. 762, pp. 445-450). (Materials Science Forum; Vol. 762). https://doi.org/10.4028/www.scientific.net/MSF.762.445

Far, M. F., Mukherjee, V., Martin, F., Rasilo, P., & Belahcen, A. (2018). Model Order Reduction of Bearingless Reluctance Motor Including Eccentricity. In 2018 23rd International Conference on Electrical Machines, ICEM 2018 (pp. 2243-2249). IEEE. https://doi.org/10.1109/ICELMACH.2018.8506758

Banichuk, N., Ivanova, S., & Jeronen, J. (2020). Moving Web and Dynamic Problem of Aerothermoelastic Vibrations and Instability. In D. A. Indeitsev, & A. M. Krivtsov (Eds.), Advanced Problems in Mechanics: Proceedings of the 47th International Summer School-Conference on Advanced Problems in Mechanics, APM 2019 (pp. 66-71). (Lecture Notes in Mechanical Engineering). Springer. https://doi.org/10.1007/978-3-030-49882-5_7

Lahti, J. (2019). Nanocellulose and Polylactic Acid Based Multilayer Coatings for Barrier Applications. In 17th Biennial TAPPI European PLACE Conference 2019 (pp. 446-455). TAPPI Press.

Teisala, H., Tuominen, M., Aromaa, M., Mäkelä, J. M., Stepien, M., Saarinen, J. J., ... Kuusipalo, J. (2011). Nanoparticle deposition on packaging materials by the liquid flame spray. In 13th European PLACE Conference 2011 (Vol. 1)

Lahti, J. (2016). Nanoscale barrier coating on BOPP packaging film by ALD. In TAPPI PLACE Conference 2016: Exploring New Frontiers (pp. 493-505). TAPPI Press.

Lahti, J., Kamppuri, T., & Kuusipalo, J. (2017). Novel bio-based materials for active and intelligent packaging. In 16th TAPPI European PLACE Conference 2017 TAPPI Press.

Lahti, J., Kuusipalo, J., & Auvinen, S. (2017). Novel equipment to simulate hot air heat sealability of packaging materials. In 16th TAPPI European PLACE Conference 2017 (pp. 237-248). TAPPI Press.

Tanskanen, J. M. A., Kapucu, F. E., & Hyttinen, J. A. K. (2015). On the threshold based neuronal spike detection, and an objective criterion for setting the threshold. In International IEEE/EMBS Conference on Neural Engineering, NER (pp. 1016-1019). IEEE COMPUTER SOCIETY PRESS. https://doi.org/10.1109/NER.2015.7146799

Wendel, S., Karamanakos, P., Dietz, A., & Kennel, R. (2019). Operating point dependent variable switching point predictive current control for PMSM drives. In PRECEDE 2019: 2019 IEEE International Symposium on Predictive Control of Electrical Drives and Power Electronics (pp. 1-6). IEEE. https://doi.org/10.1109/PRECEDE.2019.8753362

Kreutzer, J., Viehrig, M., Maki, A-J., Kallio, P., Rahikainen, R., & Hytönen, V. (2017). Pneumatically actuated elastomeric device for simultaneous mechanobiological studies & live-cell fluorescent microscopy. In International Conference on Manipulation, Automation and Robotics at Small Scales, MARSS 2017 - Proceedings IEEE. https://doi.org/10.1109/MARSS.2017.8001929

Motlagh, H. D. K., Lotfi, F., Taghirad, H. D., & Germi, S. B. (2019). Position Estimation for Drones based on Visual SLAM and IMU in GPS-denied Environment. In ICRoM 2019 - 7th International Conference on Robotics and Mechatronics (pp. 120-124). IEEE. https://doi.org/10.1109/ICRoM48714.2019.9071826

Teke, B., Lanz, M., Kämäräinen, J-K., & Hietanen, A. (2018). Real-time and Robust Collaborative Robot Motion Control with Microsoft Kinect ® v2. In 2018 14th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications, MESA 2018 [8449156] IEEE. https://doi.org/10.1109/MESA.2018.8449156

Subramaniyam, N. P., Hyttinen, J., Hatsopoulos, N. G., & Takahashi, K. (2015). Recurrence network analysis of wide band oscillations of local field potentials from the primary motor cortex reveals rich dynamics. In International IEEE/EMBS Conference on Neural Engineering, NER (pp. 960-963). IEEE COMPUTER SOCIETY PRESS. https://doi.org/10.1109/NER.2015.7146785

Kivelä, T., Mattila, J., Puura, J., & Launis, S. (2017). Redundant robotic manipulator path planning for real-time obstacle and self-collision avoidance. In C. Ferraresi, & G. Quaglia (Eds.), Advances in Service and Industrial Robotics: Proceedings of the 26th International Conference on Robotics in Alpe-Adria-Danube Region, RAAD 2017 (pp. 208-216). (Mechanisms and Machine Science; Vol. 49). Springer International Publishing. https://doi.org/10.1007/978-3-319-61276-8_24

Gusrialdi, A., Xu, Y., Qu, Z., & Simaan, M. A. (2020). Resilient Cooperative Voltage Control for Distribution Network with High Penetration Distributed Energy Resources. In European Control Conference 2020, ECC 2020 (pp. 1533-1539). IEEE.

Mahmoodpour, M., Lobov, A., Lanz, M., Mäkelä, P., & Rundas, N. (2018). Role-based visualization of industrial IoT-based systems. In 2018 14th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications, MESA 2018 [8449183] IEEE. https://doi.org/10.1109/MESA.2018.8449183

Mäkelä, J. M., Haapanen, J., Aromaa, M., Teisala, H., Tuominen, M., Stepien, M., ... Kuusipalo, J. (2015). Roll-to-roll coating by liquid flame spray nanoparticle deposition. In Materials Research Society Symposium Proceedings (Vol. 1747, pp. 37-42). MATERIALS RESEARCH SOCIETY. https://doi.org/10.1557/opl.2015.530

Christophe, F., Ritola, T., Coatanéa, E., & Bernard, A. (2011). Semantic analysis of function-solution duality. In ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011 (Vol. 3, pp. 611-619) https://doi.org/10.1115/IMECE2011-63546

Mikkonen, A., & Karvinen, R. (2016). Solar Panel Breakage During Heavy Rain Caused by Thermal Stress. In Engineered Transparency 2016: Glass in Architechture and Structural Engineering Wiley.

Lahtinen, K., & Kuusipalo, J. (2008). Statistical modeling of water vapor transmission rates for extrusion-coated papers. In TAPPI 2008 PLACE Conference: Innovations in Flexible Consumer Packaging

Koivuluoto, H., Milanti, A., Bolelli, G., Latokartano, J., Marra, F., Pulci, G., ... Vuoristo, P. (2017). Structures and properties of laser-assisted cold-sprayed aluminum coatings. In THERMEC 2016 (Vol. 879, pp. 984-989). (Materials Science Forum; Vol. 879). Trans Tech Publications Ltd. https://doi.org/10.4028/www.scientific.net/MSF.879.984

Kuusipalo, J., & Lahti, J. (2017). Tampere University of Technology, laboratory of materials science, paper converting and packaging technology Tampere, Finland. In 16th TAPPI European PLACE Conference 2017: Basel; Switzerland; 22 May 2017 through 24 May 2017 (Vol. May-2017). TAPPI Press.

Lahti, J., Tuominen, M., Penttinen, T., Räsänen, J. P., & Kuusipalo, J. (2009). The effects of corona and flame treatment: Part 2. PE-HD and PP coated papers. In TAPPI Press - 12th European PLACE Conference 2009 (Vol. 1, pp. 278-314)

Mokammel, F., Coatanea, E., Christophe, F., Ba Khouya, M., & Medyna, G. (2013). Towards an approach for evaluating the quality of requirements. In 33rd Computers and Information in Engineering Conference (Vol. 2 B). [V02BT02A024] American Society of Mechanical Engineers. https://doi.org/10.1115/DETC2013-13708

Heininen, A., Aaltonen, J., & Koskinen, K. T. (2017). Simulating the Drag Coefficient of a Spherical Autonomous Underwater Vehicle. In J. Aaltonen, R. Virkkunen, K. T. Koskinen, & R. Kuivanen (Eds.), Proceedings of the 2nd Annual SMACC Research Seminar 2017 (Vol. 2, pp. 53-56). [14] Tampere: Tampere University of Technology.

Ahonen, T., Hanski, J., Hyvärinen, M., Kortelainen, H., Uusitalo, T., Vainio, H., ... Koskinen, K. (2019). Enablers and barriers of smart data-based asset management services in industrial business networks. In Lecture Notes in Mechanical Engineering (pp. 51-60). (Lecture Notes in Mechanical Engineering). Pleiades Publishing. https://doi.org/10.1007/978-3-319-95711-1_6

Seppälä, J., & Salmenperä, M. (2015). Towards dependable automation. In Cyber Security: Analytics, Technology and Automation: Part IV (pp. 229-249). (Intelligent Systems, Control and Automation: Science and Engineering; Vol. 78). Springer International Publishing. https://doi.org/10.1007/978-3-319-18302-2_15

Priimägi, A., & Hecht, S. (Eds.) (2020). Special Issue: From Responsive Materials to Interactive Materials. Advanced Materials, 32(20).

Priimägi, A., & Hecht, S. (Eds.) (2020). From Responsive Molecules to Interactive Materials. Advanced Materials, 32(20), [2000215]. https://doi.org/10.1002/adma.202000215

Teisala, H., Tuominen, M., & Kuusipalo, J. (2014). Superhydrophobic Coatings on Cellulose-Based Materials: Fabrication, Properties, and Applications. Advanced Materials Interfaces, 1(1), 1-20. [1300026]. https://doi.org/10.1002/admi.201300026

Boardman, A. D., Alberucci, A., Assanto, G., Grimalsky, V. V., Kibler, B., McNiff, J., ... Valagiannopoulos, C. A. (2017). Waves in hyperbolic and double negative metamaterials including rogues and solitons. Nanotechnology, 28(44), [444001]. https://doi.org/10.1088/1361-6528/aa6792

Mettänen, M., & Hirn, U. (2015). A comparison of five optical surface topography measurement methods. TAPPI Journal, 14(1), 27-38.

Juoksukangas, J., Lehtovaara, A., & Mäntylä, A. (2016). A comparison of relative displacement fields between numerical predictions and experimental results in fretting contact. Proceedings of the institution of Mechanical Engineers Part J: Journal of Engineering Tribology, 230(10), 1273-1287. https://doi.org/10.1177/1350650116633573

Koivumäki, J., & Mattila, J. (2017). Adaptive and nonlinear control of discharge pressure for variable displacement axial piston pumps. Journal of Dynamic Systems, Measurement and Control: Transactions of the ASME, 139(10), [101008]. https://doi.org/10.1115/1.4036537

Laakkonen, P., & Quadrat, A. (2017). A fractional representation approach to the robust regulation problem for SISO systems. Systems and Control Letters, 103, 32-37. https://doi.org/10.1016/j.sysconle.2017.02.006

Syrjärinne, P., Nummenmaa, J., Thanisch, P., Kerminen, R., & Hakulinen, E. (2015). Analysing traffic fluency from bus data. IET Intelligent Transport Systems, 9(6), 566-572. https://doi.org/10.1049/iet-its.2014.0192

Krogerus, T., Hyvönen, M., & Huhtala, K. (2018). Analysis of common rail pressure signal of dual-fuel large industrial engine for identification of injection duration of pilot diesel injectors. Fuel, 216, 1-9. https://doi.org/10.1016/j.fuel.2017.11.152

Gashti, E. H. N., Malaska, M., & Kujala, K. (2015). Analysis of thermo-active pile structures and their performance under groundwater flow conditions. Energy and Buildings, 105, 1-8. https://doi.org/10.1016/j.enbuild.2015.07.026

Wani, O. M., Verpaalen, R., Zeng, H., Priimagi, A., & Schenning, A. P. H. J. (2019). An Artificial Nocturnal Flower via Humidity-Gated Photoactuation in Liquid Crystal Networks. Advanced Materials, 31(2), [1805985]. https://doi.org/10.1002/adma.201805985

Colace, L., Santoni, F., & Assanto, G. (2013). A near-infrared optoelectronic approach to detection of road conditions. Optics and Lasers in Engineering, 51(5), 633-636. https://doi.org/10.1016/j.optlaseng.2013.01.003

Schoeppner, R. L., Mohanty, G., Polyakov, M. N., Petho, L., Maeder, X., & Michler, J. (2020). An exploratory study on strengthening and thermal stability of magnetron sputtered W nanoparticles at the interface of Cu/Ni multilayer films. Materials and Design, 195, [108907]. https://doi.org/10.1016/j.matdes.2020.108907

Sanchez-Guevara, C., Núñez Peiró, M., Taylor, J., Mavrogianni, A., & Neila González, J. (2019). Assessing population vulnerability towards summer energy poverty: Case studies of Madrid and London. Energy and Buildings, 190, 132-143. https://doi.org/10.1016/j.enbuild.2019.02.024

Saarimaa, V., Fuertes, N., Persson, D., Zavalis, T., Kaleva, A., Nikkanen, J-P., ... Heydari, G. (2020). Assessment of pitting corrosion in bare and passivated (wet scCO2-induced patination and chemical passivation) hot-dip galvanized steel samples with SVET, FTIR, and SEM (EDS). Materials and Corrosion. https://doi.org/10.1002/maco.202011653

Paunonen, L., & Seifert, D. (2020). Asymptotics and approximation of large systems of ordinary differential equations. Systems and Control Letters, 140, [104703]. https://doi.org/10.1016/j.sysconle.2020.104703

Jaurola, M., Hedin, A., Tikkanen, S., & Huhtala, K. (2019). A TOpti simulation for finding fuel saving by optimising propulsion control and power management. Journal of Marine Science and Technology (Japan). https://doi.org/10.1007/s00773-019-00651-2

Juoksukangas, J., Hintikka, J., Lehtovaara, A., Mäntylä, A., Vaara, J., & Frondelius, T. (2020). Avoiding the high friction peak in fretting contact. Rakenteiden Mekaniikka, 53(1), 12-19. https://doi.org/10.23998/rm.76266

Lindgren, M., Santa-aho, S., & Vippola, M. (2016). Barkhausen noise response of three different welded duplex stainless steels. Insight, 58(9), 480-486. https://doi.org/10.1784/insi.2016.58.9.480

Huttunen-Saarivirta, E., Isotahdon, E., Metsäjoki, J., Salminen, T., Ronkainen, H., & Carpén, L. (2019). Behaviour of leaded tin bronze in simulated seawater in the absence and presence of tribological contact with alumina counterbody: Corrosion, wear and tribocorrosion. Tribology International, 129, 257-271. https://doi.org/10.1016/j.triboint.2018.08.021

Vuornos, K., Ojansivu, M., Koivisto, J. T., Häkkänen, H., Belay, B., Montonen, T., ... Miettinen, S. (2019). Bioactive glass ions induce efficient osteogenic differentiation of human adipose stem cells encapsulated in gellan gum and collagen type I hydrogels. Materials Science and Engineering C, 99, 905-918. https://doi.org/10.1016/j.msec.2019.02.035

Olin, M., & Dal Maso, M. (2020). CFD modeling the diffusional losses of nanocluster-sized particles and condensing vapors in 90° bends of circular tubes. Journal of Aerosol Science, 150, [105618]. https://doi.org/10.1016/j.jaerosci.2020.105618

Juoksukangas, J., Nurmi, V., Hintikka, J., Vippola, M., Lehtovaara, A., Mäntylä, A., ... Frondelius, T. (2019). Characterization of cracks formed in large flat-on-flat fretting contact. International Journal of Fatigue, 124, 361-370. https://doi.org/10.1016/j.ijfatigue.2019.03.004

Isotahdon, E., Huttunen-Saarivirta, E., & Kuokkala, V. (2017). Characterization of the microstructure and corrosion performance of Ce-alloyed Nd-Fe-B magnets. Journal of Alloys and Compounds, 692, 190-197. https://doi.org/10.1016/j.jallcom.2016.09.058

Fafarman, A. T., Hong, S. H., Caglayan, H., Ye, X., Diroll, B. T., Paik, T., ... Kagan, C. R. (2013). Chemically tailored dielectric-to-metal transition for the design of metamaterials from nanoimprinted colloidal nanocrystals. Nano Letters, 13(2), 350-357. https://doi.org/10.1021/nl303161d

Kanerva, U., Karhu, M., Lagerbom, J., Kronlöf, A., Honkanen, M., Turunen, E., & Laitinen, T. (2016). Chemical synthesis of WC-Co from water-soluble precursors: The effect of carbon and cobalt additions to WC synthesis. International Journal of Refractory Metals and Hard Materials, 56, 69-75. https://doi.org/10.1016/j.ijrmhm.2015.11.014

Mashayekhi, M., Winchester, L., Laurila, M-M., Mäntysalo, M., Ogier, S., Terés, L., & Carrabina, J. (2017). Chip-by-chip configurable interconnection using digital printing techniques. Journal of Micromechanics and Microengineering, 27(4), [045009]. https://doi.org/10.1088/1361-6439/aa5ef3

Belardini, A., Leahu, G., Petronijevic, E., Hakkarainen, T., Koivusalo, E., Piton, M. R., ... Sibilia, C. (2020). Circular dichroism in the second harmonic field evidenced by asymmetric AU coated gaas nanowires. Micromachines, 11(2), 1-8. https://doi.org/10.3390/mi11020225

Wang, H., Feng, Y., Fang, Z., Yuan, W., & Khan, M. (2012). Co-electrospun blends of PU and PEG as potential biocompatible scaffolds for small-diameter vascular tissue engineering. Materials Science and Engineering C: Materials for Biological Applications, 32(8), 2306-2315. https://doi.org/10.1016/j.msec.2012.07.001

Paris, H., Mokhtarian, H., Coatanéa, E., Museau, M., & Ituarte, I. F. (2016). Comparative environmental impacts of additive and subtractive manufacturing technologies. CIRP Annals: Manufacturing Technology, 65(1), 29-32. https://doi.org/10.1016/j.cirp.2016.04.036

Javaheri, V., Nyyssönen, T., Grande, B., & Porter, D. (2018). Computational design of a novel medium-carbon, low-alloy steel microalloyed with niobium. Journal of Materials Engineering and Performance, 27(6), 2978-2992. https://doi.org/10.1007/s11665-018-3376-9

Lanz, M., & Tuokko, R. (2017). Concepts, methods and tools for individualized production. PRODUCTION ENGINEERING, 11(2), 205-212. https://doi.org/10.1007/s11740-017-0728-5

Evans, D. M., Holstad, T. S., Mosberg, A. B., Småbråten, D. R., Vullum, P. E., Dadlani, A. L., ... Meier, D. (2020). Conductivity control via minimally invasive anti-Frenkel defects in a functional oxide. Nature Materials. https://doi.org/10.1038/s41563-020-0765-x

Välikangas, T., & Karvinen, R. (2018). Conjugated Heat Transfer Simulation of a Fin-and-Tube Heat Exchanger. Heat Transfer Engineering, 39(13-14), 1192-1200. https://doi.org/10.1080/01457632.2017.1363628

Sekki, T., Andelin, M., Airaksinen, M., & Saari, A. (2016). Consideration of energy consumption, energy costs, and space occupancy in Finnish daycare centres and school buildings. Energy and Buildings, 129, 199-206. https://doi.org/10.1016/j.enbuild.2016.08.015

Liimatainen, V., Sariola, V., & Zhou, Q. (2013). Controlling liquid spreading using microfabricated undercut edges. Advanced Materials, 25(16), 2275-2278. https://doi.org/10.1002/adma.201204696

Isotahdon, E., Huttunen-Saarivirta, E., Heinonen, S., Kuokkala, V. T., & Paju, M. (2015). Corrosion mechanisms of sintered Nd-Fe-B magnets in the presence of water as vapour, pressurised vapour and liquid. Journal of Alloys and Compounds, 626, 349-359. https://doi.org/10.1016/j.jallcom.2014.12.048

Kurnitski, J., Saari, A., Kalamees, T., Vuolle, M., Niemelä, J., & Tark, T. (2011). Cost optimal and nearly zero (nZEB) energy performance calculations for residential buildings with REHVA definition for nZEB national implementation. Energy and Buildings, 43(11), 3279-3288. https://doi.org/10.1016/j.enbuild.2011.08.033

Linko, V., Leppiniemi, J., Paasonen, S. T., Hytönen, V. P., & Jussi Toppari, J. (2011). Defined-size DNA triple crossover construct for molecular electronics: Modification, positioning and conductance properties. Nanotechnology, 22(27), [275610]. https://doi.org/10.1088/0957-4484/22/27/275610

Antin, K. N., & Pärnänen, T. (2017). Democratizing composites manufacturing -inexpensive tooling empowers new players. SAMPE Journal, 53(4), 6-10.

Välikangas, T., Hærvig, J., Kuuluvainen, H., Dal Maso, M., Peltonen, P., & Vuorinen, V. (2019). Deposition of dry particles on a fin-and-tube heat exchanger by a coupled soft-sphere DEM and CFD. International Journal of Heat and Mass Transfer, [119046]. https://doi.org/10.1016/j.ijheatmasstransfer.2019.119046

Palazzo, G., De Tullio, D., Magliulo, M., Mallardi, A., Intranuovo, F., Mulla, M. Y., ... Torsi, L. (2015). Detection beyond Debye's length with an electrolyte-gated organic field-effect transistor. Advanced Materials, 27(5), 911-916. https://doi.org/10.1002/adma.201403541

Lehmusto, J., Olin, M., Viljanen, J., Kalliokoski, J., Mylläri, F., Toivonen, J., ... Hupa, L. (2019). Detection of gaseous species during KCl-induced high-temperature corrosion by the means of CPFAAS and CI-APi-TOF. Materials and Corrosion. https://doi.org/10.1002/maco.201910964

Malas, A., Das, C. K., Das, A., & Heinrich, G. (2012). Development of expanded graphite filled natural rubber vulcanizates in presence and absence of carbon black: Mechanical, thermal and morphological properties. Materials and Design, 39, 410-417. https://doi.org/10.1016/j.matdes.2012.03.007

Ihalainen, T. O., Aires, L., Herzog, F. A., Schwartlander, R., Moeller, J., & Vogel, V. (2015). Differential basal-to-apical accessibility of lamin A/C epitopes in the nuclear lamina regulated by changes in cytoskeletal tension. Nature Materials, 14(12), 1252-1261. https://doi.org/10.1038/nmat4389

Huova, M., Aalto, A., Linjama, M., Huhtala, K., Lantela, T., & Pietola, M. (2017). Digital hydraulic multi-pressure actuator – the concept, simulation study and first experimental results. International Journal of Fluid Power, 18(3), 141-152. https://doi.org/10.1080/14399776.2017.1302775

Houaoui, A., Lyyra, I., Agniel, R., Pauthe, E., Massera, J., & Boissière, M. (2019). Dissolution, bioactivity and osteogenic properties of composites based on polymer and silicate or borosilicate bioactive glass. Materials Science and Engineering C, 107, [110340]. https://doi.org/10.1016/j.msec.2019.110340

Carfora, D., Di Gironimo, G., Järvenpää, J., Huhtala, K., Määttä, T., & Siuko, M. (2015). Divertor remote handling for DEMO: Concept design and preliminary FMECA studies. Fusion Engineering and Design, 98-99, 1437-1441. https://doi.org/10.1016/j.fusengdes.2015.06.056

Wang, X., Fagerlund, S., Massera, J., Södergård, B., & Hupa, L. (2017). Do properties of bioactive glasses exhibit mixed alkali behavior? Journal of Materials Science, 52(15), 8986–8997. https://doi.org/10.1007/s10853-017-0915-y

Stoykova, E., Berberova, N., Kim, Y., Nazarova, D., Ivanov, B., Gotchev, A., ... Kang, H. (2017). Dynamic speckle analysis with smoothed intensity-based activity maps. Optics and Lasers in Engineering, 93, 55-65. https://doi.org/10.1016/j.optlaseng.2017.01.012

Sekki, T., Airaksinen, M., & Saari, A. (2017). Effect of energy measures on the values of energy efficiency indicators in Finnish daycare and school buildings. Energy and Buildings, 139, 124-132. https://doi.org/10.1016/j.enbuild.2017.01.005

Haiko, O., Miettunen, I., Porter, D., Ojala, N., Ratia, V., Heino, V., & Kemppainen, A. (2017). Effect of finish rolling and quench stop temperatures on impact-abrasive wear resistance of 0.35 % carbon direct-quenched steel. Tribologia, 35(1-2), 5-21.

Ratia, V., Rojacz, H., Terva, J., Valtonen, K., Badisch, E., & Kuokkala, V. T. (2015). Effect of Multiple Impacts on the Deformation of Wear-Resistant Steels. Tribology Letters, 57(2), [15]. https://doi.org/10.1007/s11249-014-0460-7

Hilliaho, K., Köliö, A., Pakkala, T., Lahdensivu, J., & Vinha, J. (2016). Effects of added glazing on Balcony indoor temperatures: Field measurements. Energy and Buildings, 128, 458-472. https://doi.org/10.1016/j.enbuild.2016.07.025

Hokka, M., Black, J., Tkalich, D., Fourmeau, M., Kane, A., Hoang, N. H., ... Kuokkala, V-T. (2016). Effects of strain rate and confining pressure on the compressive behavior of Kuru granite. International Journal of Impact Engineering, 91, 183-193. https://doi.org/10.1016/j.ijimpeng.2016.01.010

Magliulo, M., Mallardi, A., Mulla, M. Y., Cotrone, S., Pistillo, B. R., Favia, P., ... Torsi, L. (2013). Electrolyte-gated organic field-effect transistor sensors based on supported biotinylated phospholipid bilayer. Advanced Materials, 25(14), 2090-2094. https://doi.org/10.1002/adma.201203587

Thomas, K., Mohanty, G., Wehrs, J., Taylor, A. A., Pathak, S., Casari, D., ... Michler, J. (2019). Elevated and cryogenic temperature micropillar compression of magnesium–niobium multilayer films. Journal of Materials Science, 54(15), 10884-10901. https://doi.org/10.1007/s10853-019-03422-x

Wu, D., Coatanea, E., & Wang, G. G. (2019). Employing Knowledge on Causal Relationship to Assist Multidisciplinary Design Optimization. Journal of Mechanical Design, Transactions of the ASME, 141(4), [041402]. https://doi.org/10.1115/1.4042342

Ottosen, N. S., Ristinmaa, M., & Kouhia, R. (2018). Enhanced multiaxial fatigue criterion that considers stress gradient effects. International Journal of Fatigue, 116, 128-139. https://doi.org/10.1016/j.ijfatigue.2018.05.024

Sajna, M. S., Perumbilavil, S., Prakashan, V. P., Sanu, M. S., Joseph, C., Biju, P. R., & Unnikrishnan, N. V. (2018). Enhanced resonant nonlinear absorption and optical limiting in Er3+ ions doped multicomponent tellurite glasses. Materials Research Bulletin, 104, 227-235. https://doi.org/10.1016/j.materresbull.2018.04.026

Bourhis, K., Massera, J., Petit, L., Koponen, J., Fargues, A., Cardinal, T., ... Ferraris, M. (2015). Erbium-doped borosilicate glasses containing various amounts of P2O5 and Al2O3: Influence of the silica content on the structure and thermal, physical, optical and luminescence properties. Materials Research Bulletin, 70, 47-54. https://doi.org/10.1016/j.materresbull.2015.04.017

Vuorinen, E., Heino, V., Ojala, N., Haiko, O., & Hedayati, A. (2018). Erosive-abrasive wear behavior of carbide-free bainitic and boron steels compared in simulated field conditions. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 232(1), 3-13. https://doi.org/10.1177/1350650117739125

Lappalainen, K., Wang, G. C., & Kleissl, J. (2020). Estimation of the largest expected photovoltaic power ramp rates. Applied Energy, 278, [115636]. https://doi.org/10.1016/j.apenergy.2020.115636

Claude, S., Ginestet, S., Bonhomme, M., Escadeillas, G., Taylor, J., Marincioni, V., ... Altamirano, H. (2019). Evaluating retrofit options in a historical city center: Relevance of bio-based insulation and the need to consider complex urban form in decision-making. Energy and Buildings, 182, 196-204. https://doi.org/10.1016/j.enbuild.2018.10.026

Juoksukangas, J., Lehtovaara, A., & Mäntylä, A. (2016). Experimental and numerical investigation of fretting fatigue behavior in bolted joints. Tribology International, 103, 440-448. https://doi.org/10.1016/j.triboint.2016.07.021

Sippola, P., Kolehmainen, J., Ozel, A., Liu, X., Saarenrinne, P., & Sundaresan, S. (2018). Experimental and numerical study of wall layer development in a tribocharged fluidized bed. Journal of Fluid Mechanics, 849, 860-884. https://doi.org/10.1017/jfm.2018.412

Lindroos, M., Apostol, M., Kuokkala, V. T., Laukkanen, A., Valtonen, K., Holmberg, K., & Oja, O. (2015). Experimental study on the behavior of wear resistant steels under high velocity single particle impacts. International Journal of Impact Engineering, 78, 114-127. https://doi.org/10.1016/j.ijimpeng.2014.12.002

Rasappa, S., Borah, D., Faulkner, C. C., Lutz, T., Shaw, M. T., Holmes, J. D., & Morris, M. A. (2013). Fabrication of a sub-10 nm silicon nanowire based ethanol sensor using block copolymer lithography. Nanotechnology, 24(6), [065503]. https://doi.org/10.1088/0957-4484/24/6/065503

Itävuo, P., Hulthén, E., & Vilkko, M. (2017). Feed-hopper level estimation and control in cone crushers. Minerals Engineering, 110, 82-95. https://doi.org/10.1016/j.mineng.2017.04.010

Mäntylä, A., Juoksukangas, J., Hintikka, J., Frondelius, T., & Lehtovaara, A. (2020). FEM-based wear simulation for fretting contacts. Rakenteiden Mekaniikka, 53(1), 20-27. https://doi.org/10.23998/rm.76261

Barreca, D., Carraro, G., Gasparotto, A., Maccato, C., Warwick, M. E. A., Kaunisto, K., ... Mathur, S. (2015). Fe2O3-TiO2 Nano-heterostructure Photoanodes for Highly Efficient Solar Water Oxidation. Advanced Materials Interfaces, 2(17). https://doi.org/10.1002/admi.201500313

Välikangas, T., Singh, S., Sørensen, K., & Condra, T. (2018). Fin-and-tube heat exchanger enhancement with a combined herringbone and vortex generator design. International Journal of Heat and Mass Transfer, 118, 602-616. https://doi.org/10.1016/j.ijheatmasstransfer.2017.11.006

Szczodra, A., Mardoukhi, A., Hokka, M., Boetti, N. G., & Petit, L. (2019). Fluorine losses in Er3+oxyfluoride phosphate glasses and glass-ceramics. Journal of Alloys and Compounds, 797, 797-803. https://doi.org/10.1016/j.jallcom.2019.05.151

Hintikka, J., Lehtovaara, A., & Mäntylä, A. (2015). Fretting-induced friction and wear in large flat-on-flat contact with quenched and tempered steel. Tribology International, 92, 191-202. https://doi.org/10.1016/j.triboint.2015.06.008

Mohammed, W. M., Ramis Ferrer, B., Iarovyi, S., Negri, E., Fumagalli, L., Lobov, A., & Martinez Lastra, J. L. (2018). Generic platform for manufacturing execution system functions in knowledge-driven manufacturing systems. International Journal of Computer Integrated Manufacturing, 1-13. https://doi.org/10.1080/0951192X.2017.1407874

Holmberg, K., Kivikytö-Reponen, P., Härkisaari, P., Valtonen, K., & Erdemir, A. (2017). Global energy consumption due to friction and wear in the mining industry. Tribology International, 115, 116-139. https://doi.org/10.1016/j.triboint.2017.05.010

Borah, D., Rasappa, S., Senthamaraikannan, R., Holmes, J. D., & Morris, M. A. (2014). Graphoepitaxial Directed Self-Assembly of Polystyrene-Block-Polydimethylsiloxane Block Copolymer on Substrates Functionalized with Hexamethyldisilazane to Fabricate Nanoscale Silicon Patterns. Advanced Materials Interfaces, 1(3), [1300102]. https://doi.org/10.1002/admi.201300102

Lisjak, D., Lintunen, P., Hujanen, A., Varis, T., Bolelli, G., Lusvarghi, L., ... Drofenik, M. (2011). Hexaferrite/polyethylene Composite coatings prepared with flame spraying. Materials Letters, 65(3), 534-536. https://doi.org/10.1016/j.matlet.2010.10.076

Subramaniam, K., Das, A., & Heinrich, G. (2012). Highly conducting polychloroprene composites based on multi-walled carbon nanotubes and 1-butyl 3-methyl imidazolium bis(trifluoromethylsulphonyl)imide. KGK: KAUTSCHUK GUMMI KUNSTSTOFFE, 65(7-8), 44-46.

Philippi, P. C., Siebert, D. N., Hegele, L. A., & Mattila, K. K. (2016). High-order lattice-Boltzmann. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 38(5), 1401-1419. https://doi.org/10.1007/s40430-015-0441-2

Tzounis, L., Debnath, S., Rooj, S., Fischer, D., Mäder, E., Das, A., ... Heinrich, G. (2014). High performance natural rubber composites with a hierarchical reinforcement structure of carbon nanotube modified natural fibers. Materials and Design, 58, 1-11. https://doi.org/10.1016/j.matdes.2014.01.071

Kivioja, H., & Vinha, J. (2020). Hot-box measurements to investigate the internal convection of highly insulated loose-fill insulation roof structures. Energy and Buildings, 216, [109934]. https://doi.org/10.1016/j.enbuild.2020.109934

Koivusalo, L., Karvinen, J., Sorsa, E., Jönkkäri, I., Väliaho, J., Kallio, P., ... Kellomäki, M. (2018). Hydrazone crosslinked hyaluronan-based hydrogels for therapeutic delivery of adipose stem cells to treat corneal defects. Materials Science and Engineering C, 85, 68-78. https://doi.org/10.1016/j.msec.2017.12.013

Shevkunov, I., Katkovnik, V., Claus, D., Pedrini, G., Petrov, N. V., & Egiazarian, K. (2020). Hyperspectral phase imaging based on denoising in complex-valued eigensubspace. Optics and Lasers in Engineering, 127, [105973]. https://doi.org/10.1016/j.optlaseng.2019.105973

Niemelä-Anttonen, H., Koivuluoto, H., Tuominen, M., Teisala, H., Juuti, P., Haapanen, J., ... Vuoristo, P. (2018). Icephobicity of Slippery Liquid Infused Porous Surfaces under Multiple Freeze–Thaw and Ice Accretion–Detachment Cycles. Advanced Materials Interfaces, 5(20). https://doi.org/10.1002/admi.201800828

Jowett, G. M., Norman, M. D. A., Yu, T. T. L., Rosell Arévalo, P., Hoogland, D., Lust, S. T., ... Gentleman, E. (2020). ILC1 drive intestinal epithelial and matrix remodelling. Nature Materials. https://doi.org/10.1038/s41563-020-0783-8

Sekki, T., Airaksinen, M., & Saari, A. (2015). Impact of building usage and occupancy on energy consumption in Finnish daycare and school buildings. Energy and Buildings, 105, 247-257. https://doi.org/10.1016/j.enbuild.2015.07.036

Valtonen, K., Ratia, V., Ramakrishnan, K. R., Apostol, M., Terva, J., & Kuokkala, V-T. (2019). Impact wear and mechanical behavior of steels at subzero temperatures. Tribology International, 129, 476-493. https://doi.org/10.1016/j.triboint.2018.08.016

Kouhia, R., Tůma, M., Mäkinen, J., Fedoroff, A., & Marjamäki, H. (2012). Implementation of a direct procedure for critical point computations using preconditioned iterative solvers. Computers & Structures, 108-109, 110-117. https://doi.org/10.1016/j.compstruc.2012.02.009

Haaparanta, A-M., Uppstu, P., Hannula, M., Ellä, V., Rosling, A., & Kellomäki, M. (2015). Improved dimensional stability with bioactive glass fibre skeleton in poly(lactide-co-glycolide) porous scaffolds for tissue engineering. Materials Science and Engineering C: Materials for Biological Applications, 56, 457-466. [5584]. https://doi.org/10.1016/j.msec.2015.07.013

Fedorik, F., Malaska, M., Hannila, R., & Haapala, A. (2015). Improving the thermal performance of concrete-sandwich envelopes in relation to the moisture behaviour of building structures in boreal conditions. Energy and Buildings, 107, 226-233. https://doi.org/10.1016/j.enbuild.2015.08.020

Janka, L., Norpoth, J., Eicher, S., Rodríguez Ripoll, M., & Vuoristo, P. (2016). Improving the toughness of thermally sprayed Cr 3C 2-NiCr hardmetal coatings by laser post-treatment. Materials and Design, 98, 135-142. https://doi.org/10.1016/j.matdes.2016.03.007

Korkiakoski, S., Brøndsted, P., Sarlin, E., & Saarela, O. (2016). Influence of specimen type and reinforcement on measured tension-tension fatigue life of unidirectional GFRP laminates. International Journal of Fatigue, 85, 114-129. https://doi.org/10.1016/j.ijfatigue.2015.12.008

Oluoti, K., Doddapaneni, T. R. K. C., & Richards, T. (2018). Investigating the kinetics and biofuel properties of Alstonia congensis and Ceiba pentandra via torrefaction. Energy, 150, 134-141. https://doi.org/10.1016/j.energy.2018.02.086

Gao, Q., Linjama, M., Paloniitty, M., & Zhu, Y. (2019). Investigation on positioning control strategy and switching optimization of an equal coded digital valve system. Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering. https://doi.org/10.1177/0959651819884749

Holopainen, S. (2020). Käyräviivaiset koordinaatistot kontinuumimekaniikassa. Rakenteiden Mekaniikka, 53(2), 53-66. https://doi.org/10.23998/rm.83338

Pekkanen, T. T., Timonen, R. S., Lendvay, G., Rissanen, M. P., & Eskola, A. J. (2019). Kinetics and thermochemistry of the reaction of 3-methylpropargyl radical with molecular oxygen. PROCEEDINGS OF THE COMBUSTION INSTITUTE, 37(1), 299-306. https://doi.org/10.1016/j.proci.2018.05.050

Cheng, Y. C., Lu, H. C., Lee, X., Zeng, H., & Priimagi, A. (2019). Kirigami-Based Light-Induced Shape-Morphing and Locomotion. Advanced Materials, [1906233]. https://doi.org/10.1002/adma.201906233

Czaplicki, R., Kiviniemi, A., Huttunen, M. J., Zang, X., Stolt, T., Vartiainen, I., ... Kauranen, M. (2018). Less Is More: Enhancement of Second-Harmonic Generation from Metasurfaces by Reduced Nanoparticle Density. Nano Letters, 18(12), 7709-7714. https://doi.org/10.1021/acs.nanolett.8b03378

Zeng, H., Wasylczyk, P., Wiersma, D. S., & Priimagi, A. (2018). Light Robots: Bridging the Gap between Microrobotics and Photomechanics in Soft Materials. Advanced Materials, 30(24), [1703554]. https://doi.org/10.1002/adma.201703554

Hakkarainen, T. V., Schramm, A., Mäkelä, J., Laukkanen, P., & Guina, M. (2015). Lithography-free oxide patterns as templates for self-catalyzed growth of highly uniform GaAs nanowires on Si(111). Nanotechnology, 26(27), [275301]. https://doi.org/10.1088/0957-4484/26/27/275301

Vitola, V., Lahti, V., Bite, I., Spustaka, A., Millers, D., Lastusaari, M., ... Smits, K. (2020). Low temperature afterglow from SrAl2O4: Eu, Dy, B containing glass. Scripta Materialia, 190, 86-90. https://doi.org/10.1016/j.scriptamat.2020.08.023

Nommeots-Nomm, A., Boetti, N. G., Salminen, T., Massera, J., Hokka, M., & Petit, L. (2018). Luminescence of Er3+ doped oxyfluoride phosphate glasses and glass-ceramics. Journal of Alloys and Compounds, 751, 224-230. https://doi.org/10.1016/j.jallcom.2018.04.101

Itävuo, P., Hulthén, E., Yahyaei, M., & Vilkko, M. (2019). Mass balance control of crushing circuits. Minerals Engineering, 135, 37-47. https://doi.org/10.1016/j.mineng.2019.02.033

Sekki, T., Airaksinen, M., & Saari, A. (2015). Measured energy consumption of educational buildings in a Finnish city. Energy and Buildings, 87, 105-115. https://doi.org/10.1016/j.enbuild.2014.11.032

Sariola, V., & Sitti, M. (2014). Mechanically Switchable Elastomeric Microfibrillar Adhesive Surfaces for Transfer Printing. Advanced Materials Interfaces, 1(4), [1300159]. https://doi.org/10.1002/admi.201300159

Carfora, D., Gironimo, G. D., Esposito, G., Huhtala, K., Määttä, T., Mäkinen, H., ... Mozzillo, R. (2016). Multicriteria selection in concept design of a divertor remote maintenance port in the EU DEMO reactor using an AHP participative approach. Fusion Engineering and Design, 112, 324-331. https://doi.org/10.1016/j.fusengdes.2016.08.023

Reshef, O., Saad-Bin-Alam, M., Huttunen, M. J., Carlow, G., Sullivan, B. T., Ménard, J. M., ... Boyd, R. W. (2019). Multiresonant High-Q Plasmonic Metasurfaces. Nano Letters, 19(9), 6429-6434. https://doi.org/10.1021/acs.nanolett.9b02638

Lauri, M., Pajarinen, J., Peters, J., & Frintrop, S. (2020). Multi-sensor next-best-view planning as matroid-constrained submodular maximization. IEEE Robotics and Automation Letters, 5(4), 5323-5330. https://doi.org/10.1109/LRA.2020.3007445

Debnath, S. C., Das, A., Basu, D., & Heinrich, G. (2013). Naturally occurring amino acids: A suitable substitute of N-N/-di-phenyl guanidine (DPG) in silica tyre formulation? KGK: KAUTSCHUK GUMMI KUNSTSTOFFE, 66(1-2), 25-31.

Cochrane, C., Mordon, S. R., Lesage, J. C., & Koncar, V. (2013). New design of textile light diffusers for photodynamic therapy. Materials Science and Engineering C: Materials for Biological Applications, 33(3), 1170-1175. https://doi.org/10.1016/j.msec.2012.12.007

Layek, R. K., Uddin, M. E., Kim, N. H., Tak Lau, A. K., & Lee, J. H. (2017). Noncovalent functionalization of reduced graphene oxide with pluronic F127 and its nanocomposites with gum arabic. Composites Part B : Engineering, 128, 155-163. https://doi.org/10.1016/j.compositesb.2017.07.010

Backas, J., & Ghabcheloo, R. (2019). Nonlinear model predictive energy management of hydrostatic drive transmissions. Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering, 233(3), 335-347. https://doi.org/10.1177/0959651818793454

Hintikka, J., Lehtovaara, A., & Mäntylä, A. (2016). Normal displacements in non-Coulomb friction conditions during fretting. Tribology International, 94, 633-639. https://doi.org/10.1016/j.triboint.2015.10.029

Kezilebieke, S., Žitko, R., Dvorak, M., Ojanen, T., & Liljeroth, P. (2019). Observation of Coexistence of Yu-Shiba-Rusinov States and Spin-Flip Excitations. Nano Letters, 19(7), 4614-4619. https://doi.org/10.1021/acs.nanolett.9b01583

Lindroos, M., Laukkanen, A., Cailletaud, G., & Kuokkala, V-T. (2017). On the effect of deformation twinning and microstructure to strain hardening of high manganese austenitic steel 3D microstructure aggregates at large strains. International Journal of Solids and Structures, 125, 68-76. https://doi.org/10.1016/j.ijsolstr.2017.07.015

Kravchenko, A., Shevchenko, A., Ovchinnikov, V., Priimagi, A., & Kaivola, M. (2011). Optical interference lithography using azobenzene-functionalized polymers for micro-and nanopatterning of silicon. Advanced Materials, 23(36), 4174-4177. https://doi.org/10.1002/adma.201101888

Tuurna, S., Varis, T., Penttilä, K., Ruusuvuori, K., Holmström, S., & Yli-Olli, S. (2011). Optimised selection of new protective coatings for biofuel boiler applications. Materials and Corrosion-Werkstoffe und Korrosion, 62(7), 642-649. https://doi.org/10.1002/maco.201005898

Taddeo, R., Prajapati, S., & Lepistö, R. (2017). Optimizing ammonium adsorption on natural zeolite for wastewaters with high loads of ammonium and solids. Journal of Porous Materials, 24(6), 1545–1554. https://doi.org/10.1007/s10934-017-0394-1

Roldán Del Cerro, P., Salminen, T., Lastusaari, M., & Petit, L. (2018). Persistent luminescent borosilicate glasses using direct particles doping method. Scripta Materialia, 151, 38-41. https://doi.org/10.1016/j.scriptamat.2018.03.034

Nommeots-Nomm, A., Houaoui, A., Pradeepan Packiyanathar, A., Chen, X., Hokka, M., Hill, R., ... Massera, J. (2020). Phosphate/oxyfluorophosphate glass crystallization and its impact on dissolution and cytotoxicity. Materials Science and Engineering C, 117, [111269]. https://doi.org/10.1016/j.msec.2020.111269

Kreutzer, J., Viehrig, M., Pölönen, R. P., Zhao, F., Ojala, M., Aalto-Setälä, K., & Kallio, P. (2019). Pneumatic unidirectional cell stretching device for mechanobiological studies of cardiomyocytes. BIOMECHANICS AND MODELING IN MECHANOBIOLOGY. https://doi.org/10.1007/s10237-019-01211-8

Pirjola, L., Kuuluvainen, H., Timonen, H., Saarikoski, S., Teinilä, K., Salo, L., ... Rönkkö, T. (2019). Potential of renewable fuel to reduce diesel exhaust particle emissions. Applied Energy, 254, [113636]. https://doi.org/10.1016/j.apenergy.2019.113636

Mäntylä, A., Hintikka, J., Frondelius, T., Vaara, J., Lehtovaara, A., & Juoksukangas, J. (2019). Prediction of contact condition and surface damage by simulating variable friction coefficient and wear. Tribology International, [106054]. https://doi.org/10.1016/j.triboint.2019.106054

Pajarinen, J., Arenz, O., Peters, J., & Neumann, G. (2020). Probabilistic approach to physical object disentangling. IEEE Robotics and Automation Letters, 5(4), 5510-5517. https://doi.org/10.1109/LRA.2020.3006789

Ahmed, R., Priimagi, A., Faul, C. F. J., & Manners, I. (2012). Redox-active, organometallic surface-relief gratings from azobenzene-containing polyferrocenylsilane block copolymers. Advanced Materials, 24(7), 926-931. https://doi.org/10.1002/adma.201103793

Alanen, J., Ruiz Morales, E., Muhammad, A., Saarinen, H., & Minkkinen, J. (2019). Remote diagnostics application software for remote handling equipment. Fusion Engineering and Design. https://doi.org/10.1016/j.fusengdes.2019.01.125

Linjamaa, A., Lehtovaara, A., Kallio, M., & Léger, A. (2019). Running-in effects on friction of journal bearings under slow sliding speeds. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. https://doi.org/10.1177/1350650119864758

Hintikka, J., Mäntylä, A., Vaara, J., Frondelius, T., Juoksukangas, J., & Lehtovaara, A. (2019). Running-in in fretting, transition from near-stable friction regime to gross sliding. Tribology International, 143, [106073]. https://doi.org/10.1016/j.triboint.2019.106073

Czaplicki, R., Mäkitalo, J., Siikanen, R., Husu, H., Lehtolahti, J., Kuittinen, M., & Kauranen, M. (2015). Second-Harmonic Generation from Metal Nanoparticles: Resonance Enhancement versus Particle Geometry. Nano Letters, 15(1), 530-534. https://doi.org/10.1021/nl503901e

Bautista, G., Mäkitalo, J., Chen, Y., Dhaka, V., Grasso, M., Karvonen, L., ... Kauranen, M. (2015). Second-harmonic generation imaging of semiconductor nanowires with focused vector beams. Nano Letters, 15(3), 1564-1569. https://doi.org/10.1021/nl503984b

Chang, B., Sariola, V., Jääskeläinen, M., & Zhou, Q. (2011). Self-alignment in the stacking of microchips with mist-induced water droplets. Journal of Micromechanics and Microengineering, 21(1), [015016]. https://doi.org/10.1088/0960-1317/21/1/015016

Chang, B., Routa, I., Sariola, V., & Zhou, Q. (2011). Self-alignment of RFID dies on four-pad patterns with water droplet for sparse self-assembly. Journal of Micromechanics and Microengineering, 21(9), [095024]. https://doi.org/10.1088/0960-1317/21/9/095024

Gordon, T. R., Paik, T., Klein, D. R., Naik, G. V., Caglayan, H., Boltasseva, A., & Murray, C. B. (2013). Shape-dependent plasmonic response and directed self-assembly in a new semiconductor building block, indium-doped cadmium oxide (ICO). Nano Letters, 13(6), 2857-2863. https://doi.org/10.1021/nl4012003

Ylönen, M., Franc, J. P., Miettinen, J., Saarenrinne, P., & Fivel, M. (2019). Shedding frequency in cavitation erosion evolution tracking. International Journal of Multiphase Flow, 118, 141-149. https://doi.org/10.1016/j.ijmultiphaseflow.2019.06.009

Le, T., Lin, Z., Wong, C. P., & Tentzeris, M. M. (2015). Smart Skins: Could they be the ultimate sensing tool? Today\uFFFDs industry and personal medical care both strongly demand accurate, reliable, robust, lo. IEEE Nanotechnology Magazine, 9(2), 4-10. [7080864]. https://doi.org/10.1109/MNANO.2015.2410474

Netzev, M., Angleraud, A., & Pieters, R. (2020). Soft robotic gripper with compliant cell stacks for industrial part handling. IEEE Robotics and Automation Letters, 5(4), 6821-6828. https://doi.org/10.1109/LRA.2020.3020546

Šutka, A., Käämbre, T., Joost, U., Kooser, K., Kook, M., Duarte, R. F., ... Smits, K. (2018). Solvothermal synthesis derived Co-Ga codoped ZnO diluted magnetic degenerated semiconductor nanocrystals. Journal of Alloys and Compounds, 763, 164-172. https://doi.org/10.1016/j.jallcom.2018.05.036

Lemougna, P. N., Yliniemi, J., Ismailov, A., Levänen, E., Tanskanen, P., Kinnunen, P., ... Illikainen, M. (Accepted/In press). Spodumene tailings for porcelain and structural materials: Effect of temperature (1050–1200 °C) on the sintering and properties. Minerals Engineering, [105843]. https://doi.org/10.1016/j.mineng.2019.105843

Luna, E., Wu, M., Hanke, M., Puustinen, J., Guina, M., & Trampert, A. (2016). Spontaneous formation of three-dimensionally ordered Bi-rich nanostructures within GaAs1-xBix/GaAs quantum wells. Nanotechnology, 27(32), [325603]. https://doi.org/10.1088/0957-4484/27/32/325603

Hintikka, J., Mäntylä, A., Vaara, J., Frondelius, T., & Lehtovaara, A. (2019). Stable and unstable friction in fretting contacts. Tribology International, 131, 73-82. https://doi.org/10.1016/j.triboint.2018.10.014

Andersson, P., Kilpi, L., Holmberg, K., Vaajoki, A., & Oksanen, V. (2016). Static friction measurements on steel against uncoated and coated cast iron. Tribologia, 34(1-2), 5-40.

Laurila, M. M., Khorramdel, B., Dastpak, A., & Mäntysalo, M. (2017). Statistical analysis of E-jet print parameter effects on Ag-nanoparticle ink droplet size. Journal of Micromechanics and Microengineering, 27(9), [095005]. https://doi.org/10.1088/1361-6439/aa7a71

Seidt, J. D., Kuokkala, V-T., Smith, J. L., & Gilat, A. (2017). Synchronous Full-Field Strain and Temperature Measurement in Tensile Tests at Low, Intermediate and High Strain Rates. Experimental Mechanics, 57(2), 219–229. https://doi.org/10.1007/s11340-016-0237-z

Chronopoulos, A., Thorpe, S. D., Cortes, E., Lachowski, D., Rice, A. J., Mykuliak, V. V., ... del Río Hernández, A. E. (2020). Syndecan-4 tunes cell mechanics by activating the kindlin-integrin-RhoA pathway. Nature Materials. https://doi.org/10.1038/s41563-019-0567-1

Sautter, J. D., Xu, L., Miroshnichenko, A. E., Lysevych, M., Volkovskaya, I., Smirnova, D. A., ... Rahmani, M. (2019). Tailoring Second-Harmonic Emission from (111)-GaAs Nanoantennas. Nano Letters, 19(6), 3905-3911. https://doi.org/10.1021/acs.nanolett.9b01112

Doddapaneni, T. R. K. C., Praveenkumar, R., Tolvanen, H., Rintala, J., & Konttinen, J. (2018). Techno-economic evaluation of integrating torrefaction with anaerobic digestion. Applied Energy, 213, 272-284. https://doi.org/10.1016/j.apenergy.2018.01.045

Björling, M., Miettinen, J., Marklund, P., Lehtovaara, A., & Larsson, R. (2015). The correlation between gear contact friction and ball on disc friction measurements. Tribology International, 83, 114-119. https://doi.org/10.1016/j.triboint.2014.11.007

Lindroos, M., Apostol, M., Heino, V., Valtonen, K., Laukkanen, A., Holmberg, K., & Kuokkala, V. T. (2015). The deformation, strain hardening, and wear behavior of chromium-alloyed hadfield steel in abrasive and impact conditions. Tribology Letters, 57(3), [24]. https://doi.org/10.1007/s11249-015-0477-6

Järvinen, H., Isakov, M., Nyyssönen, T., Järvenpää, M., & Peura, P. (2016). The effect of initial microstructure on the final properties of press hardened 22MnB5 steels. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing, 676, 109-120. https://doi.org/10.1016/j.msea.2016.08.096

Lorimer, G. W., Dicken, R., Peura, P., Pilkington, R., Younes, C. M., Allen, G. C., & Holt, M. J. (1996). The effect of phosphorous and arsenic on the fracture behaviour of a 2,25% Cr-1% Mo Steel. Materials Science Forum, 207-209(PART 2), 645-648.

Nurmi, V., Hintikka, J., Juoksukangas, J., Honkanen, M., Vippola, M., Lehtovaara, A., ... Frondelius, T. (2019). The formation and characterization of fretting-induced degradation layers using quenched and tempered steel. Tribology International, 131, 258-267. https://doi.org/10.1016/j.triboint.2018.09.012

Liimatainen, H., van Vliet, O., & Aplyn, D. (2019). The potential of electric trucks – An international commodity-level analysis. Applied Energy, 236, 804-814. https://doi.org/10.1016/j.apenergy.2018.12.017

Mishra, A., Petit, L., Pihl, M., Andersson, M., Salminen, T., Rocherullé, J., & Massera, J. (2017). Thermal, structural and in vitro dissolution of antimicrobial copper-doped and slow resorbable iron-doped phosphate glasses. Journal of Materials Science, 52(15), 8957–8972. https://doi.org/10.1007/s10853-017-0805-3

Rodríguez Ripoll, M., Ojala, N., Katsich, C., Totolin, V., Tomastik, C., & Hradil, K. (2016). The role of niobium in improving toughness and corrosion resistance of high speed steel laser hardfacings. Materials and Design, 99, 509-520. https://doi.org/10.1016/j.matdes.2016.03.081

Hintikka, J., Lehtovaara, A., & Mäntylä, A. (2017). Third Particle Ejection Effects on Wear with Quenched and Tempered Steel Fretting Contact. TRIBOLOGY TRANSACTIONS, 60(1), 70-78. https://doi.org/10.1080/10402004.2016.1146813

Jaurola, M., Hedin, A., Tikkanen, S., & Huhtala, K. (2018). TOpti: a flexible framework for optimising energy management for various ship machinery topologies. Journal of Marine Science and Technology (Japan). https://doi.org/10.1007/s00773-018-0617-4

Kuzmin, M., Laukkanen, P., Mäkelä, J., Yasir, M., Tuominen, M., Dahl, J., ... Guina, M. (2016). Toward the Atomically Abrupt Interfaces of SiOx/Semiconductor Junctions. Advanced Materials Interfaces, 3(11), [1500510]. https://doi.org/10.1002/admi.201500510

Wu, H., Sariola, V., Zhu, C., Zhao, J., Sitti, M., & Bettinger, C. J. (2015). Transfer printing of metallic microstructures on adhesion-promoting hydrogel substrates. Advanced Materials, 27(22), 3398-3404. https://doi.org/10.1002/adma.201500954

Ryynänen, T., Mzezewa, R., Meriläinen, E., Hyvärinen, T., Lekkala, J., Narkilahti, S., & Kallio, P. (2020). Transparent microelectrode arrays fabricated by ion beam assisted deposition for neuronal cell in vitro recordings. Micromachines, 11(5), [497]. https://doi.org/10.3390/MI11050497

Huttunen-Saarivirta, E., Kilpi, L., Pasanen, A. T., Salminen, T., & Ronkainen, H. (2020). Tribocorrosion behaviour of tin bronze CuSn12 under a sliding motion in NaCl containing environment: Contact to inert vs. reactive counterbody. Tribology International, 151, [106389]. https://doi.org/10.1016/j.triboint.2020.106389

Mäntyranta, A., Heino, V., Isotahdon, E., Salminen, T., & Huttunen-Saarivirta, E. (2019). Tribocorrosion behaviour of two low-alloy steel grades in simulated waste solution. Tribology International, 138, 250-262. https://doi.org/10.1016/j.triboint.2019.05.032

Teisala, H., Geyer, F., Haapanen, J., Juuti, P., Mäkelä, J. M., Vollmer, D., & Butt, H. J. (2018). Ultrafast Processing of Hierarchical Nanotexture for a Transparent Superamphiphobic Coating with Extremely Low Roll-Off Angle and High Impalement Pressure. Advanced Materials, 30(14), [1706529]. https://doi.org/10.1002/adma.201706529

Barreca, D., Carraro, G., Gasparotto, A., Maccato, C., Altantzis, T., Sada, C., ... Bals, S. (2017). Vapor Phase Fabrication of Nanoheterostructures Based on ZnO for Photoelectrochemical Water Splitting. Advanced Materials Interfaces, 4(18), [1700161]. https://doi.org/10.1002/admi.201700161

Linjama, M. (2019). Variable speed digital hydraulic transformer–based servo drive. Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering. https://doi.org/10.1177/0959651819869145

Linjama, M. (2019). Variable speed drive with hydraulic boost. International Journal of Fluid Power, 20(1), 99-123. https://doi.org/10.13052/ijfp1439-9776.2014

Perttula, A., Nguyen, N., Collin, J., & Jokinen, J-P. (2019). Vehicle type detection and passenger satisfaction analysis using smartphone sensors and digital surveys. IET Intelligent Transport Systems, 13(10), 1499-1506. https://doi.org/10.1049/iet-its.2018.5349

Zhang, H., Zeng, H., Priimägi, A., & Ikkala, O. (2020). Viewpoint: Pavlovian Materials—Functional Biomimetics Inspired by Classical Conditioning. Advanced Materials, [1906619]. https://doi.org/10.1002/adma.201906619

Bolelli, G., Milanti, A., Lusvarghi, L., Trombi, L., Koivuluoto, H., & Vuoristo, P. (2016). Wear and impact behaviour of High Velocity Air-Fuel sprayed Fe-Cr-Ni-B-C alloy coatings. Tribology International, 95, 372-390. https://doi.org/10.1016/j.triboint.2015.11.036

Haiko, O., Heino, V., Porter, D. A., Uusitalo, J., & Kömi, J. (2019). Effect of microstructure on the abrasive wear resistance of steels with hardness 450 HV. Tribologia, 36(1), 54-57. https://doi.org/10.30678/FJT.82443

Matikainen, V., Rubio Peregrina, S., Ojala, N., Koivuluoto, H., Schubert, J., Houdková, & Vuoristo, P. (2019). Slurry and dry particle erosion wear properties of WC-10Co4Cr and Cr3C2-25NiCr hardmetal coatings deposited by HVOF and HVAF spray processes. Tribologia, 36(1-2), 58-61. https://doi.org/10.30678/FJT.83590