Santa-aho S, Laitinen A, Sorsa A, Vippola M. Barkhausen Noise Probes and Modelling: A Review. Journal of Nondestructive Evaluation. 2019 Dec 1;38(4). 94.

Coatanéa E, Ritola T, Tumer IY, Jensen D. A framework for building behavioral models for design-stage failure identification using dimensional analysis. In Proceedings of the ASME Design Engineering Technical Conference. Vol. 5. AMER SOC MECHANICAL ENGINEERS. 2010. p. 591-601

Saintsing CD, Cook BS, Tentzeris MM. An origami inspired reconfigurable spiral antenna. In 38th Mechanisms and Robotics Conference. Vol. 5B. The American Society of Mechanical Engineers ASME. 2014

Pyrhönen V-P, Koivisto H, Vilkko M. A Reduced-Order Two-Degree-of-Freedom Composite Nonlinear Feedback Control for a Rotary DC Servo Motor. In Proceedings of the 56th IEEE Conference on Decision and Control. Melbourne, Australia. 2017. p. 2065-2071

Caraffi C, Vojir T, Trefný J, Šochman J, Matas J. A system for real-time detection and tracking of vehicles from a single car-mounted camera. In 2012 15th International IEEE Conference on Intelligent Transportation Systems, ITSC 2012. 2012. p. 975-982. 6338748

Yang D, Feng Y, Behl M, Lendlein A, Zhao H, Khan M et al. Biomimetic hemo-compatible surfaces of polyurethane by grafting copolymer brushes of poly(ethylene glycol) and poly(phosphorylcholine methacrylate). In Multifunctional Polymer-Based Materials. Vol. 1403. 2012. p. 171-176

Borah D, Rasappa S, Kosmala B, Holmes JD, Morris MA. Block copolymer self-assembly on ethylene glycol (EG) self-assembled monolayer (SAM) for nanofabrication. In Nanoscale Materials Modification by Photon, Ion, and Electron Beams. Vol. 1450. 2012. p. 8-13

Martinez F, Neculqueo G, Vasquez SO, Lemmetyinen H, Efimov A, Vivo P. Branched thiophene oligomer/polymer bulk heterojunction organic solar cell. In Materials Research Society Symposium Proceedings. Vol. 1737. MATERIALS RESEARCH SOCIETY. 2015. p. 19-25

Ghabcheloo R, Siddiqui S. Complete Odometry Estimation of a Vehicle Using Single Automotive Radar and a Gyroscope. In MED 2018 - 26th Mediterranean Conference on Control and Automation. IEEE. 2018. p. 855-860. 8442474

Di Vito D, Mosallaei M, Vahed BK, Kanerva M, Mäntysalo M. Deformability analysis and improvement in stretchable electronics systems through finite element analysis. In Carcaterra A, Graziani G, Paolone A, editors, Proceedings of XXIV AIMETA Conference 2019. Springer. 2020. p. 755-763. (Lecture Notes in Mechanical Engineering).

Cao X, Aref MM, Mattila J. Design and Control of a Flexible Joint as a Hydraulic Series Elastic Actuator for Manipulation Applications. In Proceedings of the IEEE 2019 9th International Conference on Cybernetics and Intelligent Systems and Robotics, Automation and Mechatronics, CIS and RAM 2019. IEEE. 2019. p. 553-558. 9095773. (IEEE International Conference on Cybernetics and Intelligent Systems).

Hartikainen J, Kolari K, Kouhia R. Development and numerical implementation of an anisotropic continuum damage model for concrete. In Advances in Fracture and Damage Mechanics XV. Trans Tech Publications Ltd. 2016. p. 115-118. (Key Engineering Materials).

Hokka M, Mirow N, Nagel H, Vogt S, Kuokkala V-T. DIC measurements of the human heart during cardiopulmonary bypass surgery. In Conference Proceedings of the Society for Experimental Mechanics Series. Vol. 6. Springer New York LLC. 2016. p. 51-59

Soltani A, Curtze S, Lahti J, Järvelä K, Laurikka J, Hokka M et al. Digital image correlation study of the deformation and functioning of the human heart during open-heart surgery. In Mechanics of Biological Systems, Materials and other topics in Experimental and Applied Mechanics - Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics. Vol. 4. Springer New York LLC. 2018. p. 19-27. (Conference Proceedings of the Society for Experimental Mechanics).

Wu D, Coatanea E, Wang GG. Dimension reduction and decomposition using causal graph and qualitative analysis for aircraft concept design optimization. In 43rd Design Automation Conference. The American Society of Mechanical Engineers ASME. 2017

Rossi M, Liegmann E, Karamanakos P, Castelli-Dezza F, Kennel R. Direct model predictive power control of a series-connected modular rectifier. In PRECEDE 2019: 2019 IEEE International Symposium on Predictive Control of Electrical Drives and Power Electronics. IEEE. 2019. p. 1-6

Suokas E. Effect of air gap on the adhesion of PET layer on cardboard substrate in extrusion coating. In 16th TAPPI European PLACE Conference 2017. TAPPI Press. 2017. p. 529-544

Suokas E. Effect of polyolefin molecular structure on product properties in extrusion coating. In 17th Biennial TAPPI European PLACE Conference 2019. TAPPI Press. 2019. p. 89-98

Vähä-Nissi M, Hirvikorpi T, Sievänen J, Salo E, Harlin A, Johansson P et al. Effect of pre-treatments on barrier properties of layers applied by atomic layer deposition onto polymer-coated substrates. In 13th European PLACE Conference 2011. Vol. 1. 2011. p. 447

Rasilo P, Belahcen A, Arkkio A. Effect of rotor pole-shoe construction on losses of inverter-fed synchronous motors. In Proceedings - 2012 20th International Conference on Electrical Machines, ICEM 2012. 2012. p. 1282-1286

Vazquez Fernandez N, Isakov M, Hokka M, Kuokkala VT. Effects of adiabatic heating estimated from tensile tests with continuous heating. In Dynamic Behavior of Materials - Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics. Vol. 1. Springer New York LLC. 2018. p. 1-7. (Conference Proceedings of the Society for Experimental Mechanics).

Mäkinen J, Fränti K, Korhonen M, Fillion J, Heinisuo M. End-plate connections in Bi-axial bending - Measurements. In Mazzolani FM, Squillace A, Faggiano B, Bellucci F, editors, 13th International Aluminium Conference, Sustainability, Durability and Structural Advantages, : INALCO 2016; Naples; Italy; 21 September 2016 through 23 September 2016. Vol. 710. Trans Tech Publications Ltd. 2016. p. 275-280. (Key Engineering Materials).

Mendes MR, Subramaniyam NP, Wendel-Mitoraj K. Evaluating the electrode measurement sensitivity of subdermal electroencephalography electrodes. In International IEEE/EMBS Conference on Neural Engineering, NER. Vol. 2015-July. IEEE COMPUTER SOCIETY PRESS. 2015. p. 1092-1095

Medyna G, Coatanea E, Millet D. Evaluation of parts of a boat cabin based on exergy - Focusing on environmental and economic assessments. In ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011. PARTS A AND B ed. Vol. 4. AMER SOC MECHANICAL ENGINEERS. 2011. p. 1083-1092

Koivikko A, Sariola V. Fabrication of soft devices with buried fluid channels by using sacrificial 3D printed molds. In 2019 2nd IEEE International Conference on Soft Robotics (RoboSoft). IEEE. 2019. p. 509-513

Far MF, Mustafa B, Martin F, Rasilo P, Belahcen A. Flux-Weakening Control for IPMSM Employing Model Order Reduction. In 2018 23rd International Conference on Electrical Machines, ICEM 2018. IEEE. 2018. p. 1510-1516

Mäenpää P, Aref MM, Mattila J. FORMI: A Fast Holonomic Path Planning and Obstacle Representation Method Based on Interval Analysis. In Proceedings of the IEEE 2019 9th International Conference on Cybernetics and Intelligent Systems and Robotics, Automation and Mechatronics, CIS and RAM 2019. IEEE. 2019. p. 398-403. (IEEE International Conference on Cybernetics and Intelligent Systems).

Ellman A, Wendrich R, Tiainen T. Framework and feasibility study for pairwise comparison tool. In Proceedings of the ASME 2016 Computers and Information in Engineering Conference IDETC/CIE 2016. Charlotte, North Carolina: ASME. 2016. DETC2016-59886

Coatanéa E, Nonsiri S, Christophe F, Mokammel F. Graph based representation and analyses for conceptual stages. In 34th Computers and Information in Engineering Conference. Vol. 1A. The American Society of Mechanical Engineers ASME. 2014

Mikkonen A, Karvinen R. Heat Transfer of Impinging Jet: Effect of Compressibility and Turbulent Kinetic Energy Production. In IX International Conference on Computational Heat and Mass Transfer (ICCHMT 2016) . 2017

Hokka M, Östman K, Rämö J, Kuokkala VT. High Temperature Tension HSB Device Based on Direct Electrical Heating. In Song B, Casem D, Kimberley J, editors, Dynamic Behavior of Materials, Volume 1: Proceedings of the 2014 Annual Conference on Experimental and Applied Mechanics. Vol. 65. Springer. 2015. p. 227-233. (Conference Proceedings of the Society for Experimental Mechanics Series).

Lahtinen K, Lahti J, Johansson P, Seppänen T, Cameron DC. Improving the effect of a nanoscale barrier coating on BOPP film properties by surface pretreatments. In 14th European PLACE Conference 2013. Vol. 1. TAPPI Press. 2013. p. 469-493

Lahti J, Johansson P, Lahtinen K, Cameron DC, Seppänen T. Improving the effect of nanoscale barrier coating on BOPP film properties: Influence of substrate contamination, web handling and pretreatments. In TAPPI PLACE Conference 2014. Vol. 2. TAPPI Press. 2014. p. 1039-1061

Mäkinen P, Mononen T, Mattila J. Inertial Sensor-Based State Estimation of Flexible Links Subject to Bending and Torsion. In 2018 14th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications, MESA 2018. IEEE. 2018. 8449188

Singh AK, Ahonen A, Ghabcheloo R, Mueller A. Introducing Multi-Convexity in Path Constrained Trajectory Optimization for Mobile Manipulators. In European Control Conference 2020, ECC 2020. IEEE. 2020. p. 1178-1185

Coatanéa E, Wu D, Tsarkov V, Gary Wang G, Modi S, Jafarian H. Knowledge-based artificial neural network (KB-ANN) in engineering: Associating functional architecture modeling, dimensional analysis and causal graphs to produce optimized topologies for KB-ANNs. In 38th Computers and Information in Engineering Conference. Vol. 1B-2018. The American Society of Mechanical Engineers ASME. 2018

Palagi S, Mark AG, Melde K, Qiu T, Zeng H, Parmeggiani C et al. Locomotion of light-driven soft microrobots through a hydrogel via local melting. In International Conference on Manipulation, Automation and Robotics at Small Scales, MARSS 2017 - Proceedings. IEEE. 2017

Lahti J. Market implementation of active and intelligent packaging-opportunities from a socio-economic perspective. In 17th Biennial TAPPI European PLACE Conference 2019. TAPPI Press. 2019. p. 419-427

Ronkainen H, Kanerva U, Varis T, Ruusuvuori K, Turunen E, Peräntie J et al. Materials for electronics by thermal spraying. In Physical and Numerical Simulation of Materials Processing VII. Vol. 762. 2013. p. 451-456. (Materials Science Forum).

Pylkkänen K, Nurmikolu A, Guthrie WS, Argyle HM. Measurements and Modeling of Frost Depth in Railway Tracks. In Proceedings of the International Conference on Cold Regions Engineering: 16th International Conference on Cold Regions Engineering 2015. American Society of Civil Engineers ASCE. 2015. p. 123-134

Coatanéa E, Yannou B, Honkala S, Lajunen A, Saarelainen T, Makkonen P. Measurement theory and dimensional analysis: Methodological impact on the comparison and evaluation process. In 19th International Conference on Design Theory and Methodology and 1st International Conference on Micro and Nano Systems, presented at - 2007 ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2007. AMER SOC MECHANICAL ENGINEERS. 2008. p. 173-182

Liikanen H, Aref MM, Mattila J. M-Estimator Application in Real-Time Sensor Fusion for Smooth Position Feedback of Heavy-Duty Field Robots. In Proceedings of the IEEE 2019 9th International Conference on Cybernetics and Intelligent Systems (CIS) and IEEE Conference on Robotics, Automation and Mechatronics (RAM). IEEE. 2019. p. 368-373. (IEEE International Conference on Cybernetics and Intelligent Systems).

Alatalo M, Pitkänen H, Ropo M, Kokko K, Vitos L. Modeling of steels and steel surfaces using quantum mechanical first principles methods. In Physical and Numerical Simulation of Materials Processing VII. Vol. 762. 2013. p. 445-450. (Materials Science Forum).

Far MF, Mukherjee V, Martin F, Rasilo P, Belahcen A. Model Order Reduction of Bearingless Reluctance Motor Including Eccentricity. In 2018 23rd International Conference on Electrical Machines, ICEM 2018. IEEE. 2018. p. 2243-2249

Banichuk N, Ivanova S, Jeronen J. Moving Web and Dynamic Problem of Aerothermoelastic Vibrations and Instability. In Indeitsev DA, Krivtsov AM, editors, Advanced Problems in Mechanics: Proceedings of the 47th International Summer School-Conference on Advanced Problems in Mechanics, APM 2019. Springer. 2020. p. 66-71. (Lecture Notes in Mechanical Engineering).

Lahti J. Nanocellulose and Polylactic Acid Based Multilayer Coatings for Barrier Applications. In 17th Biennial TAPPI European PLACE Conference 2019. TAPPI Press. 2019. p. 446-455

Teisala H, Tuominen M, Aromaa M, Mäkelä JM, Stepien M, Saarinen JJ et al. Nanoparticle deposition on packaging materials by the liquid flame spray. In 13th European PLACE Conference 2011. Vol. 1. 2011

Lahti J. Nanoscale barrier coating on BOPP packaging film by ALD. In TAPPI PLACE Conference 2016: Exploring New Frontiers. TAPPI Press. 2016. p. 493-505

Lahti J, Kamppuri T, Kuusipalo J. Novel bio-based materials for active and intelligent packaging. In 16th TAPPI European PLACE Conference 2017. TAPPI Press. 2017

Lahti J, Kuusipalo J, Auvinen S. Novel equipment to simulate hot air heat sealability of packaging materials. In 16th TAPPI European PLACE Conference 2017. TAPPI Press. 2017. p. 237-248

Tanskanen JMA, Kapucu FE, Hyttinen JAK. On the threshold based neuronal spike detection, and an objective criterion for setting the threshold. In International IEEE/EMBS Conference on Neural Engineering, NER. IEEE COMPUTER SOCIETY PRESS. 2015. p. 1016-1019

Wendel S, Karamanakos P, Dietz A, Kennel R. Operating point dependent variable switching point predictive current control for PMSM drives. In PRECEDE 2019: 2019 IEEE International Symposium on Predictive Control of Electrical Drives and Power Electronics. IEEE. 2019. p. 1-6

Kreutzer J, Viehrig M, Maki A-J, Kallio P, Rahikainen R, Hytönen V. Pneumatically actuated elastomeric device for simultaneous mechanobiological studies & live-cell fluorescent microscopy. In International Conference on Manipulation, Automation and Robotics at Small Scales, MARSS 2017 - Proceedings. IEEE. 2017

Motlagh HDK, Lotfi F, Taghirad HD, Germi SB. Position Estimation for Drones based on Visual SLAM and IMU in GPS-denied Environment. In ICRoM 2019 - 7th International Conference on Robotics and Mechatronics. IEEE. 2019. p. 120-124

Teke B, Lanz M, Kämäräinen J-K, Hietanen A. Real-time and Robust Collaborative Robot Motion Control with Microsoft Kinect ® v2. In 2018 14th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications, MESA 2018. IEEE. 2018. 8449156

Subramaniyam NP, Hyttinen J, Hatsopoulos NG, Takahashi K. Recurrence network analysis of wide band oscillations of local field potentials from the primary motor cortex reveals rich dynamics. In International IEEE/EMBS Conference on Neural Engineering, NER. IEEE COMPUTER SOCIETY PRESS. 2015. p. 960-963

Kivelä T, Mattila J, Puura J, Launis S. Redundant robotic manipulator path planning for real-time obstacle and self-collision avoidance. In Ferraresi C, Quaglia G, editors, Advances in Service and Industrial Robotics: Proceedings of the 26th International Conference on Robotics in Alpe-Adria-Danube Region, RAAD 2017. Springer International Publishing. 2017. p. 208-216. (Mechanisms and Machine Science).

Gusrialdi A, Xu Y, Qu Z, Simaan MA. Resilient Cooperative Voltage Control for Distribution Network with High Penetration Distributed Energy Resources. In European Control Conference 2020, ECC 2020. IEEE. 2020. p. 1533-1539

Mahmoodpour M, Lobov A, Lanz M, Mäkelä P, Rundas N. Role-based visualization of industrial IoT-based systems. In 2018 14th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications, MESA 2018. IEEE. 2018. 8449183

Mäkelä JM, Haapanen J, Aromaa M, Teisala H, Tuominen M, Stepien M et al. Roll-to-roll coating by liquid flame spray nanoparticle deposition. In Materials Research Society Symposium Proceedings. Vol. 1747. MATERIALS RESEARCH SOCIETY. 2015. p. 37-42

Christophe F, Ritola T, Coatanéa E, Bernard A. Semantic analysis of function-solution duality. In ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011. Vol. 3. 2011. p. 611-619

Mikkonen A, Karvinen R. Solar Panel Breakage During Heavy Rain Caused by Thermal Stress. In Engineered Transparency 2016: Glass in Architechture and Structural Engineering. Wiley. 2016

Lahtinen K, Kuusipalo J. Statistical modeling of water vapor transmission rates for extrusion-coated papers. In TAPPI 2008 PLACE Conference: Innovations in Flexible Consumer Packaging. 2008

Koivuluoto H, Milanti A, Bolelli G, Latokartano J, Marra F, Pulci G et al. Structures and properties of laser-assisted cold-sprayed aluminum coatings. In THERMEC 2016. Vol. 879. Trans Tech Publications Ltd. 2017. p. 984-989. (Materials Science Forum).

Kuusipalo J, Lahti J. Tampere University of Technology, laboratory of materials science, paper converting and packaging technology Tampere, Finland. In 16th TAPPI European PLACE Conference 2017: Basel; Switzerland; 22 May 2017 through 24 May 2017. Vol. May-2017. TAPPI Press. 2017

Lahti J, Tuominen M, Penttinen T, Räsänen JP, Kuusipalo J. The effects of corona and flame treatment: Part 2. PE-HD and PP coated papers. In TAPPI Press - 12th European PLACE Conference 2009. Vol. 1. 2009. p. 278-314

Mokammel F, Coatanea E, Christophe F, Ba Khouya M, Medyna G. Towards an approach for evaluating the quality of requirements. In 33rd Computers and Information in Engineering Conference. Vol. 2 B. American Society of Mechanical Engineers. 2013. V02BT02A024

Heininen A, Aaltonen J, Koskinen KT. Simulating the Drag Coefficient of a Spherical Autonomous Underwater Vehicle. In Aaltonen J, Virkkunen R, Koskinen KT, Kuivanen R, editors, Proceedings of the 2nd Annual SMACC Research Seminar 2017. Vol. 2. Tampere: Tampere University of Technology. 2017. p. 53-56. 14

Ahonen T, Hanski J, Hyvärinen M, Kortelainen H, Uusitalo T, Vainio H et al. Enablers and barriers of smart data-based asset management services in industrial business networks. In Lecture Notes in Mechanical Engineering. Pleiades Publishing. 2019. p. 51-60. (Lecture Notes in Mechanical Engineering).

Seppälä J, Salmenperä M. Towards dependable automation. In Cyber Security: Analytics, Technology and Automation: Part IV. Springer International Publishing. 2015. p. 229-249. (Intelligent Systems, Control and Automation: Science and Engineering).

Priimägi A, (ed.), Hecht S, (ed.). Special Issue: From Responsive Materials to Interactive Materials. Advanced Materials. 2020;32(20).

Priimägi A, (ed.), Hecht S, (ed.). From Responsive Molecules to Interactive Materials. Advanced Materials. 2020;32(20). 2000215.

Teisala H, Tuominen M, Kuusipalo J. Superhydrophobic Coatings on Cellulose-Based Materials: Fabrication, Properties, and Applications. Advanced Materials Interfaces. 2014 Feb 1;1(1):1-20. 1300026.

Boardman AD, Alberucci A, Assanto G, Grimalsky VV, Kibler B, McNiff J et al. Waves in hyperbolic and double negative metamaterials including rogues and solitons. Nanotechnology. 2017 Oct 9;28(44). 444001.

Mettänen M, Hirn U. A comparison of five optical surface topography measurement methods. TAPPI Journal. 2015 Jan 1;14(1):27-38.

Juoksukangas J, Lehtovaara A, Mäntylä A. A comparison of relative displacement fields between numerical predictions and experimental results in fretting contact. Proceedings of the institution of Mechanical Engineers Part J: Journal of Engineering Tribology. 2016 Oct 1;230(10):1273-1287.

Koivumäki J, Mattila J. Adaptive and nonlinear control of discharge pressure for variable displacement axial piston pumps. Journal of Dynamic Systems, Measurement and Control: Transactions of the ASME. 2017 Oct 1;139(10). 101008.

Laakkonen P, Quadrat A. A fractional representation approach to the robust regulation problem for SISO systems. Systems and Control Letters. 2017 May 1;103:32-37.

Syrjärinne P, Nummenmaa J, Thanisch P, Kerminen R, Hakulinen E. Analysing traffic fluency from bus data. IET Intelligent Transport Systems. 2015 Aug 1;9(6):566-572.

Krogerus T, Hyvönen M, Huhtala K. Analysis of common rail pressure signal of dual-fuel large industrial engine for identification of injection duration of pilot diesel injectors. Fuel. 2018 Mar;216:1-9.

Gashti EHN, Malaska M, Kujala K. Analysis of thermo-active pile structures and their performance under groundwater flow conditions. Energy and Buildings. 2015 Aug 11;105:1-8.

Wani OM, Verpaalen R, Zeng H, Priimagi A, Schenning APHJ. An Artificial Nocturnal Flower via Humidity-Gated Photoactuation in Liquid Crystal Networks. Advanced Materials. 2019 Jan;31(2). 1805985.

Colace L, Santoni F, Assanto G. A near-infrared optoelectronic approach to detection of road conditions. Optics and Lasers in Engineering. 2013 May;51(5):633-636.

Schoeppner RL, Mohanty G, Polyakov MN, Petho L, Maeder X, Michler J. An exploratory study on strengthening and thermal stability of magnetron sputtered W nanoparticles at the interface of Cu/Ni multilayer films. Materials and Design. 2020;195. 108907.

Sanchez-Guevara C, Núñez Peiró M, Taylor J, Mavrogianni A, Neila González J. Assessing population vulnerability towards summer energy poverty: Case studies of Madrid and London. Energy and Buildings. 2019 May 1;190:132-143.

Saarimaa V, Fuertes N, Persson D, Zavalis T, Kaleva A, Nikkanen J-P et al. Assessment of pitting corrosion in bare and passivated (wet scCO2-induced patination and chemical passivation) hot-dip galvanized steel samples with SVET, FTIR, and SEM (EDS). Materials and Corrosion. 2020.

Paunonen L, Seifert D. Asymptotics and approximation of large systems of ordinary differential equations. Systems and Control Letters. 2020;140. 104703.

Jaurola M, Hedin A, Tikkanen S, Huhtala K. A TOpti simulation for finding fuel saving by optimising propulsion control and power management. Journal of Marine Science and Technology (Japan). 2019.

Juoksukangas J, Hintikka J, Lehtovaara A, Mäntylä A, Vaara J, Frondelius T. Avoiding the high friction peak in fretting contact. Rakenteiden Mekaniikka. 2020;53(1):12-19.

Lindgren M, Santa-aho S, Vippola M. Barkhausen noise response of three different welded duplex stainless steels. Insight. 2016 Sep 1;58(9):480-486.

Huttunen-Saarivirta E, Isotahdon E, Metsäjoki J, Salminen T, Ronkainen H, Carpén L. Behaviour of leaded tin bronze in simulated seawater in the absence and presence of tribological contact with alumina counterbody: Corrosion, wear and tribocorrosion. Tribology International. 2019;129:257-271.

Vuornos K, Ojansivu M, Koivisto JT, Häkkänen H, Belay B, Montonen T et al. Bioactive glass ions induce efficient osteogenic differentiation of human adipose stem cells encapsulated in gellan gum and collagen type I hydrogels. Materials Science and Engineering C. 2019 Jun 1;99:905-918.

Olin M, Dal Maso M. CFD modeling the diffusional losses of nanocluster-sized particles and condensing vapors in 90° bends of circular tubes. Journal of Aerosol Science. 2020;150. 105618.

Juoksukangas J, Nurmi V, Hintikka J, Vippola M, Lehtovaara A, Mäntylä A et al. Characterization of cracks formed in large flat-on-flat fretting contact. International Journal of Fatigue. 2019 Jul;124:361-370.

Isotahdon E, Huttunen-Saarivirta E, Kuokkala V. Characterization of the microstructure and corrosion performance of Ce-alloyed Nd-Fe-B magnets. Journal of Alloys and Compounds. 2017 Jan;692:190-197.

Fafarman AT, Hong SH, Caglayan H, Ye X, Diroll BT, Paik T et al. Chemically tailored dielectric-to-metal transition for the design of metamaterials from nanoimprinted colloidal nanocrystals. Nano Letters. 2013 Feb 13;13(2):350-357.

Kanerva U, Karhu M, Lagerbom J, Kronlöf A, Honkanen M, Turunen E et al. Chemical synthesis of WC-Co from water-soluble precursors: The effect of carbon and cobalt additions to WC synthesis. International Journal of Refractory Metals and Hard Materials. 2016 Apr 1;56:69-75.

Mashayekhi M, Winchester L, Laurila M-M, Mäntysalo M, Ogier S, Terés L et al. Chip-by-chip configurable interconnection using digital printing techniques. Journal of Micromechanics and Microengineering. 2017 Mar 6;27(4). 045009.

Belardini A, Leahu G, Petronijevic E, Hakkarainen T, Koivusalo E, Piton MR et al. Circular dichroism in the second harmonic field evidenced by asymmetric AU coated gaas nanowires. Micromachines. 2020 Feb 1;11(2):1-8.

Wang H, Feng Y, Fang Z, Yuan W, Khan M. Co-electrospun blends of PU and PEG as potential biocompatible scaffolds for small-diameter vascular tissue engineering. Materials Science and Engineering C: Materials for Biological Applications. 2012 Dec 1;32(8):2306-2315.

Paris H, Mokhtarian H, Coatanéa E, Museau M, Ituarte IF. Comparative environmental impacts of additive and subtractive manufacturing technologies. CIRP Annals: Manufacturing Technology. 2016;65(1):29-32.

Javaheri V, Nyyssönen T, Grande B, Porter D. Computational design of a novel medium-carbon, low-alloy steel microalloyed with niobium. Journal of Materials Engineering and Performance. 2018 Jun;27(6):2978-2992.

Lanz M, Tuokko R. Concepts, methods and tools for individualized production. PRODUCTION ENGINEERING. 2017 Apr 1;11(2):205-212.

Evans DM, Holstad TS, Mosberg AB, Småbråten DR, Vullum PE, Dadlani AL et al. Conductivity control via minimally invasive anti-Frenkel defects in a functional oxide. Nature Materials. 2020.

Välikangas T, Karvinen R. Conjugated Heat Transfer Simulation of a Fin-and-Tube Heat Exchanger. Heat Transfer Engineering. 2018;39(13-14):1192-1200.

Sekki T, Andelin M, Airaksinen M, Saari A. Consideration of energy consumption, energy costs, and space occupancy in Finnish daycare centres and school buildings. Energy and Buildings. 2016 Oct 1;129:199-206.

Liimatainen V, Sariola V, Zhou Q. Controlling liquid spreading using microfabricated undercut edges. Advanced Materials. 2013 Apr 24;25(16):2275-2278.

Isotahdon E, Huttunen-Saarivirta E, Heinonen S, Kuokkala VT, Paju M. Corrosion mechanisms of sintered Nd-Fe-B magnets in the presence of water as vapour, pressurised vapour and liquid. Journal of Alloys and Compounds. 2015 Mar 25;626:349-359.

Kurnitski J, Saari A, Kalamees T, Vuolle M, Niemelä J, Tark T. Cost optimal and nearly zero (nZEB) energy performance calculations for residential buildings with REHVA definition for nZEB national implementation. Energy and Buildings. 2011 Nov;43(11):3279-3288.

Linko V, Leppiniemi J, Paasonen ST, Hytönen VP, Jussi Toppari J. Defined-size DNA triple crossover construct for molecular electronics: Modification, positioning and conductance properties. Nanotechnology. 2011 Jul 8;22(27). 275610.

Antin KN, Pärnänen T. Democratizing composites manufacturing -inexpensive tooling empowers new players. SAMPE Journal. 2017 Jul 1;53(4):6-10.

Välikangas T, Hærvig J, Kuuluvainen H, Dal Maso M, Peltonen P, Vuorinen V. Deposition of dry particles on a fin-and-tube heat exchanger by a coupled soft-sphere DEM and CFD. International Journal of Heat and Mass Transfer. 2019. 119046.

Palazzo G, De Tullio D, Magliulo M, Mallardi A, Intranuovo F, Mulla MY et al. Detection beyond Debye's length with an electrolyte-gated organic field-effect transistor. Advanced Materials. 2015;27(5):911-916.

Lehmusto J, Olin M, Viljanen J, Kalliokoski J, Mylläri F, Toivonen J et al. Detection of gaseous species during KCl-induced high-temperature corrosion by the means of CPFAAS and CI-APi-TOF. Materials and Corrosion. 2019 Aug 30.

Malas A, Das CK, Das A, Heinrich G. Development of expanded graphite filled natural rubber vulcanizates in presence and absence of carbon black: Mechanical, thermal and morphological properties. Materials and Design. 2012;39:410-417.

Ihalainen TO, Aires L, Herzog FA, Schwartlander R, Moeller J, Vogel V. Differential basal-to-apical accessibility of lamin A/C epitopes in the nuclear lamina regulated by changes in cytoskeletal tension. Nature Materials. 2015 Dec 1;14(12):1252-1261.

Huova M, Aalto A, Linjama M, Huhtala K, Lantela T, Pietola M. Digital hydraulic multi-pressure actuator – the concept, simulation study and first experimental results. International Journal of Fluid Power. 2017;18(3):141-152.

Houaoui A, Lyyra I, Agniel R, Pauthe E, Massera J, Boissière M. Dissolution, bioactivity and osteogenic properties of composites based on polymer and silicate or borosilicate bioactive glass. Materials Science and Engineering C. 2019;107. 110340.

Carfora D, Di Gironimo G, Järvenpää J, Huhtala K, Määttä T, Siuko M. Divertor remote handling for DEMO: Concept design and preliminary FMECA studies. Fusion Engineering and Design. 2015 Jul 9;98-99:1437-1441.

Wang X, Fagerlund S, Massera J, Södergård B, Hupa L. Do properties of bioactive glasses exhibit mixed alkali behavior? Journal of Materials Science. 2017;52(15):8986–8997.

Stoykova E, Berberova N, Kim Y, Nazarova D, Ivanov B, Gotchev A et al. Dynamic speckle analysis with smoothed intensity-based activity maps. Optics and Lasers in Engineering. 2017 Jun 1;93:55-65.

Sekki T, Airaksinen M, Saari A. Effect of energy measures on the values of energy efficiency indicators in Finnish daycare and school buildings. Energy and Buildings. 2017 Mar 15;139:124-132.

Haiko O, Miettunen I, Porter D, Ojala N, Ratia V, Heino V et al. Effect of finish rolling and quench stop temperatures on impact-abrasive wear resistance of 0.35 % carbon direct-quenched steel. Tribologia. 2017;35(1-2):5-21.

Ratia V, Rojacz H, Terva J, Valtonen K, Badisch E, Kuokkala VT. Effect of Multiple Impacts on the Deformation of Wear-Resistant Steels. Tribology Letters. 2015 Jan 21;57(2). 15.

Hilliaho K, Köliö A, Pakkala T, Lahdensivu J, Vinha J. Effects of added glazing on Balcony indoor temperatures: Field measurements. Energy and Buildings. 2016;128:458-472.

Hokka M, Black J, Tkalich D, Fourmeau M, Kane A, Hoang NH et al. Effects of strain rate and confining pressure on the compressive behavior of Kuru granite. International Journal of Impact Engineering. 2016 May 1;91:183-193.

Magliulo M, Mallardi A, Mulla MY, Cotrone S, Pistillo BR, Favia P et al. Electrolyte-gated organic field-effect transistor sensors based on supported biotinylated phospholipid bilayer. Advanced Materials. 2013 Apr 11;25(14):2090-2094.

Thomas K, Mohanty G, Wehrs J, Taylor AA, Pathak S, Casari D et al. Elevated and cryogenic temperature micropillar compression of magnesium–niobium multilayer films. Journal of Materials Science. 2019 Aug 15;54(15):10884-10901.

Wu D, Coatanea E, Wang GG. Employing Knowledge on Causal Relationship to Assist Multidisciplinary Design Optimization. Journal of Mechanical Design, Transactions of the ASME. 2019 Apr;141(4). 041402.

Ottosen NS, Ristinmaa M, Kouhia R. Enhanced multiaxial fatigue criterion that considers stress gradient effects. International Journal of Fatigue. 2018 Nov 1;116:128-139.

Sajna MS, Perumbilavil S, Prakashan VP, Sanu MS, Joseph C, Biju PR et al. Enhanced resonant nonlinear absorption and optical limiting in Er3+ ions doped multicomponent tellurite glasses. Materials Research Bulletin. 2018 Aug 1;104:227-235.

Bourhis K, Massera J, Petit L, Koponen J, Fargues A, Cardinal T et al. Erbium-doped borosilicate glasses containing various amounts of P2O5 and Al2O3: Influence of the silica content on the structure and thermal, physical, optical and luminescence properties. Materials Research Bulletin. 2015 Oct 1;70:47-54.

Vuorinen E, Heino V, Ojala N, Haiko O, Hedayati A. Erosive-abrasive wear behavior of carbide-free bainitic and boron steels compared in simulated field conditions. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 2018;232(1):3-13.

Lappalainen K, Wang GC, Kleissl J. Estimation of the largest expected photovoltaic power ramp rates. Applied Energy. 2020 Nov 15;278. 115636.

Claude S, Ginestet S, Bonhomme M, Escadeillas G, Taylor J, Marincioni V et al. Evaluating retrofit options in a historical city center: Relevance of bio-based insulation and the need to consider complex urban form in decision-making. Energy and Buildings. 2019 Jan 1;182:196-204.

Juoksukangas J, Lehtovaara A, Mäntylä A. Experimental and numerical investigation of fretting fatigue behavior in bolted joints. Tribology International. 2016 Nov 1;103:440-448.

Sippola P, Kolehmainen J, Ozel A, Liu X, Saarenrinne P, Sundaresan S. Experimental and numerical study of wall layer development in a tribocharged fluidized bed. Journal of Fluid Mechanics. 2018 Aug 25;849:860-884.

Lindroos M, Apostol M, Kuokkala VT, Laukkanen A, Valtonen K, Holmberg K et al. Experimental study on the behavior of wear resistant steels under high velocity single particle impacts. International Journal of Impact Engineering. 2015;78:114-127.

Rasappa S, Borah D, Faulkner CC, Lutz T, Shaw MT, Holmes JD et al. Fabrication of a sub-10 nm silicon nanowire based ethanol sensor using block copolymer lithography. Nanotechnology. 2013 Feb 15;24(6). 065503.

Itävuo P, Hulthén E, Vilkko M. Feed-hopper level estimation and control in cone crushers. Minerals Engineering. 2017 Aug 15;110:82-95.

Mäntylä A, Juoksukangas J, Hintikka J, Frondelius T, Lehtovaara A. FEM-based wear simulation for fretting contacts. Rakenteiden Mekaniikka. 2020;53(1):20-27.

Barreca D, Carraro G, Gasparotto A, Maccato C, Warwick MEA, Kaunisto K et al. Fe2O3-TiO2 Nano-heterostructure Photoanodes for Highly Efficient Solar Water Oxidation. Advanced Materials Interfaces. 2015;2(17).

Välikangas T, Singh S, Sørensen K, Condra T. Fin-and-tube heat exchanger enhancement with a combined herringbone and vortex generator design. International Journal of Heat and Mass Transfer. 2018;118:602-616.

Szczodra A, Mardoukhi A, Hokka M, Boetti NG, Petit L. Fluorine losses in Er3+oxyfluoride phosphate glasses and glass-ceramics. Journal of Alloys and Compounds. 2019 Aug 15;797:797-803.

Hintikka J, Lehtovaara A, Mäntylä A. Fretting-induced friction and wear in large flat-on-flat contact with quenched and tempered steel. Tribology International. 2015 Jul 2;92:191-202.

Mohammed WM, Ramis Ferrer B, Iarovyi S, Negri E, Fumagalli L, Lobov A et al. Generic platform for manufacturing execution system functions in knowledge-driven manufacturing systems. International Journal of Computer Integrated Manufacturing. 2018 Mar 4;1-13.

Holmberg K, Kivikytö-Reponen P, Härkisaari P, Valtonen K, Erdemir A. Global energy consumption due to friction and wear in the mining industry. Tribology International. 2017 Nov 1;115:116-139.

Borah D, Rasappa S, Senthamaraikannan R, Holmes JD, Morris MA. Graphoepitaxial Directed Self-Assembly of Polystyrene-Block-Polydimethylsiloxane Block Copolymer on Substrates Functionalized with Hexamethyldisilazane to Fabricate Nanoscale Silicon Patterns. Advanced Materials Interfaces. 2014 Jun 1;1(3). 1300102.

Lisjak D, Lintunen P, Hujanen A, Varis T, Bolelli G, Lusvarghi L et al. Hexaferrite/polyethylene Composite coatings prepared with flame spraying. Materials Letters. 2011 Feb 15;65(3):534-536.

Subramaniam K, Das A, Heinrich G. Highly conducting polychloroprene composites based on multi-walled carbon nanotubes and 1-butyl 3-methyl imidazolium bis(trifluoromethylsulphonyl)imide. KGK: KAUTSCHUK GUMMI KUNSTSTOFFE. 2012 Jul;65(7-8):44-46.

Philippi PC, Siebert DN, Hegele LA, Mattila KK. High-order lattice-Boltzmann. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2016 Jun 1;38(5):1401-1419.

Tzounis L, Debnath S, Rooj S, Fischer D, Mäder E, Das A et al. High performance natural rubber composites with a hierarchical reinforcement structure of carbon nanotube modified natural fibers. Materials and Design. 2014;58:1-11.

Kivioja H, Vinha J. Hot-box measurements to investigate the internal convection of highly insulated loose-fill insulation roof structures. Energy and Buildings. 2020 Jun 1;216. 109934.

Koivusalo L, Karvinen J, Sorsa E, Jönkkäri I, Väliaho J, Kallio P et al. Hydrazone crosslinked hyaluronan-based hydrogels for therapeutic delivery of adipose stem cells to treat corneal defects. Materials Science and Engineering C. 2018 Apr;85:68-78.

Shevkunov I, Katkovnik V, Claus D, Pedrini G, Petrov NV, Egiazarian K. Hyperspectral phase imaging based on denoising in complex-valued eigensubspace. Optics and Lasers in Engineering. 2020 Apr 1;127. 105973.

Niemelä-Anttonen H, Koivuluoto H, Tuominen M, Teisala H, Juuti P, Haapanen J et al. Icephobicity of Slippery Liquid Infused Porous Surfaces under Multiple Freeze–Thaw and Ice Accretion–Detachment Cycles. Advanced Materials Interfaces. 2018 Oct;5(20).

Jowett GM, Norman MDA, Yu TTL, Rosell Arévalo P, Hoogland D, Lust ST et al. ILC1 drive intestinal epithelial and matrix remodelling. Nature Materials. 2020.

Sekki T, Airaksinen M, Saari A. Impact of building usage and occupancy on energy consumption in Finnish daycare and school buildings. Energy and Buildings. 2015 Aug 18;105:247-257.

Valtonen K, Ratia V, Ramakrishnan KR, Apostol M, Terva J, Kuokkala V-T. Impact wear and mechanical behavior of steels at subzero temperatures. Tribology International. 2019;129:476-493.

Kouhia R, Tůma M, Mäkinen J, Fedoroff A, Marjamäki H. Implementation of a direct procedure for critical point computations using preconditioned iterative solvers. Computers & Structures. 2012 Oct;108-109:110-117.

Haaparanta A-M, Uppstu P, Hannula M, Ellä V, Rosling A, Kellomäki M. Improved dimensional stability with bioactive glass fibre skeleton in poly(lactide-co-glycolide) porous scaffolds for tissue engineering. Materials Science and Engineering C: Materials for Biological Applications. 2015 Jul 20;56:457-466. 5584.

Fedorik F, Malaska M, Hannila R, Haapala A. Improving the thermal performance of concrete-sandwich envelopes in relation to the moisture behaviour of building structures in boreal conditions. Energy and Buildings. 2015 Nov 15;107:226-233.

Janka L, Norpoth J, Eicher S, Rodríguez Ripoll M, Vuoristo P. Improving the toughness of thermally sprayed Cr 3C 2-NiCr hardmetal coatings by laser post-treatment. Materials and Design. 2016 May 15;98:135-142.

Korkiakoski S, Brøndsted P, Sarlin E, Saarela O. Influence of specimen type and reinforcement on measured tension-tension fatigue life of unidirectional GFRP laminates. International Journal of Fatigue. 2016 Apr 1;85:114-129.

Oluoti K, Doddapaneni TRKC, Richards T. Investigating the kinetics and biofuel properties of Alstonia congensis and Ceiba pentandra via torrefaction. Energy. 2018 May 1;150:134-141.

Gao Q, Linjama M, Paloniitty M, Zhu Y. Investigation on positioning control strategy and switching optimization of an equal coded digital valve system. Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering. 2019.

Holopainen S. Käyräviivaiset koordinaatistot kontinuumimekaniikassa. Rakenteiden Mekaniikka. 2020;53(2):53-66.

Pekkanen TT, Timonen RS, Lendvay G, Rissanen MP, Eskola AJ. Kinetics and thermochemistry of the reaction of 3-methylpropargyl radical with molecular oxygen. PROCEEDINGS OF THE COMBUSTION INSTITUTE. 2019 Jan 1;37(1):299-306.

Cheng YC, Lu HC, Lee X, Zeng H, Priimagi A. Kirigami-Based Light-Induced Shape-Morphing and Locomotion. Advanced Materials. 2019. 1906233.

Czaplicki R, Kiviniemi A, Huttunen MJ, Zang X, Stolt T, Vartiainen I et al. Less Is More: Enhancement of Second-Harmonic Generation from Metasurfaces by Reduced Nanoparticle Density. Nano Letters. 2018 Dec 12;18(12):7709-7714.

Zeng H, Wasylczyk P, Wiersma DS, Priimagi A. Light Robots: Bridging the Gap between Microrobotics and Photomechanics in Soft Materials. Advanced Materials. 2018;30(24). 1703554.

Hakkarainen TV, Schramm A, Mäkelä J, Laukkanen P, Guina M. Lithography-free oxide patterns as templates for self-catalyzed growth of highly uniform GaAs nanowires on Si(111). Nanotechnology. 2015 Jul 18;26(27). 275301.

Vitola V, Lahti V, Bite I, Spustaka A, Millers D, Lastusaari M et al. Low temperature afterglow from SrAl2O4: Eu, Dy, B containing glass. Scripta Materialia. 2020;190:86-90.

Nommeots-Nomm A, Boetti NG, Salminen T, Massera J, Hokka M, Petit L. Luminescence of Er3+ doped oxyfluoride phosphate glasses and glass-ceramics. Journal of Alloys and Compounds. 2018 Jun 30;751:224-230.

Itävuo P, Hulthén E, Yahyaei M, Vilkko M. Mass balance control of crushing circuits. Minerals Engineering. 2019 May;135:37-47.

Sekki T, Airaksinen M, Saari A. Measured energy consumption of educational buildings in a Finnish city. Energy and Buildings. 2015 Jan 1;87:105-115.

Sariola V, Sitti M. Mechanically Switchable Elastomeric Microfibrillar Adhesive Surfaces for Transfer Printing. Advanced Materials Interfaces. 2014 Jul 1;1(4). 1300159.

Carfora D, Gironimo GD, Esposito G, Huhtala K, Määttä T, Mäkinen H et al. Multicriteria selection in concept design of a divertor remote maintenance port in the EU DEMO reactor using an AHP participative approach. Fusion Engineering and Design. 2016 Nov 15;112:324-331.

Reshef O, Saad-Bin-Alam M, Huttunen MJ, Carlow G, Sullivan BT, Ménard JM et al. Multiresonant High-Q Plasmonic Metasurfaces. Nano Letters. 2019 Sep 11;19(9):6429-6434.

Lauri M, Pajarinen J, Peters J, Frintrop S. Multi-sensor next-best-view planning as matroid-constrained submodular maximization. IEEE Robotics and Automation Letters. 2020;5(4):5323-5330.

Debnath SC, Das A, Basu D, Heinrich G. Naturally occurring amino acids: A suitable substitute of N-N/-di-phenyl guanidine (DPG) in silica tyre formulation? KGK: KAUTSCHUK GUMMI KUNSTSTOFFE. 2013 Jan;66(1-2):25-31.

Cochrane C, Mordon SR, Lesage JC, Koncar V. New design of textile light diffusers for photodynamic therapy. Materials Science and Engineering C: Materials for Biological Applications. 2013 Apr 1;33(3):1170-1175.

Layek RK, Uddin ME, Kim NH, Tak Lau AK, Lee JH. Noncovalent functionalization of reduced graphene oxide with pluronic F127 and its nanocomposites with gum arabic. Composites Part B : Engineering. 2017 Nov 1;128:155-163.

Backas J, Ghabcheloo R. Nonlinear model predictive energy management of hydrostatic drive transmissions. Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering. 2019 Mar 1;233(3):335-347.

Hintikka J, Lehtovaara A, Mäntylä A. Normal displacements in non-Coulomb friction conditions during fretting. Tribology International. 2016;94:633-639.

Kezilebieke S, Žitko R, Dvorak M, Ojanen T, Liljeroth P. Observation of Coexistence of Yu-Shiba-Rusinov States and Spin-Flip Excitations. Nano Letters. 2019 Jul 10;19(7):4614-4619.

Lindroos M, Laukkanen A, Cailletaud G, Kuokkala V-T. On the effect of deformation twinning and microstructure to strain hardening of high manganese austenitic steel 3D microstructure aggregates at large strains. International Journal of Solids and Structures. 2017;125:68-76.

Kravchenko A, Shevchenko A, Ovchinnikov V, Priimagi A, Kaivola M. Optical interference lithography using azobenzene-functionalized polymers for micro-and nanopatterning of silicon. Advanced Materials. 2011 Sep 22;23(36):4174-4177.

Tuurna S, Varis T, Penttilä K, Ruusuvuori K, Holmström S, Yli-Olli S. Optimised selection of new protective coatings for biofuel boiler applications. Materials and Corrosion-Werkstoffe und Korrosion. 2011 Jul;62(7):642-649.

Taddeo R, Prajapati S, Lepistö R. Optimizing ammonium adsorption on natural zeolite for wastewaters with high loads of ammonium and solids. Journal of Porous Materials. 2017;24(6):1545–1554.

Roldán Del Cerro P, Salminen T, Lastusaari M, Petit L. Persistent luminescent borosilicate glasses using direct particles doping method. Scripta Materialia. 2018 Jul 1;151:38-41.

Nommeots-Nomm A, Houaoui A, Pradeepan Packiyanathar A, Chen X, Hokka M, Hill R et al. Phosphate/oxyfluorophosphate glass crystallization and its impact on dissolution and cytotoxicity. Materials Science and Engineering C. 2020;117. 111269.

Kreutzer J, Viehrig M, Pölönen RP, Zhao F, Ojala M, Aalto-Setälä K et al. Pneumatic unidirectional cell stretching device for mechanobiological studies of cardiomyocytes. BIOMECHANICS AND MODELING IN MECHANOBIOLOGY. 2019 Aug 23.

Pirjola L, Kuuluvainen H, Timonen H, Saarikoski S, Teinilä K, Salo L et al. Potential of renewable fuel to reduce diesel exhaust particle emissions. Applied Energy. 2019 Nov 15;254. 113636.

Mäntylä A, Hintikka J, Frondelius T, Vaara J, Lehtovaara A, Juoksukangas J. Prediction of contact condition and surface damage by simulating variable friction coefficient and wear. Tribology International. 2019 Nov 5. 106054.

Pajarinen J, Arenz O, Peters J, Neumann G. Probabilistic approach to physical object disentangling. IEEE Robotics and Automation Letters. 2020;5(4):5510-5517.

Ahmed R, Priimagi A, Faul CFJ, Manners I. Redox-active, organometallic surface-relief gratings from azobenzene-containing polyferrocenylsilane block copolymers. Advanced Materials. 2012 Feb 14;24(7):926-931.

Alanen J, Ruiz Morales E, Muhammad A, Saarinen H, Minkkinen J. Remote diagnostics application software for remote handling equipment. Fusion Engineering and Design. 2019.

Linjamaa A, Lehtovaara A, Kallio M, Léger A. Running-in effects on friction of journal bearings under slow sliding speeds. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 2019.

Hintikka J, Mäntylä A, Vaara J, Frondelius T, Juoksukangas J, Lehtovaara A. Running-in in fretting, transition from near-stable friction regime to gross sliding. Tribology International. 2019 Nov;143. 106073.

Czaplicki R, Mäkitalo J, Siikanen R, Husu H, Lehtolahti J, Kuittinen M et al. Second-Harmonic Generation from Metal Nanoparticles: Resonance Enhancement versus Particle Geometry. Nano Letters. 2015 Jan 14;15(1):530-534.

Bautista G, Mäkitalo J, Chen Y, Dhaka V, Grasso M, Karvonen L et al. Second-harmonic generation imaging of semiconductor nanowires with focused vector beams. Nano Letters. 2015 Feb 6;15(3):1564-1569.

Chang B, Sariola V, Jääskeläinen M, Zhou Q. Self-alignment in the stacking of microchips with mist-induced water droplets. Journal of Micromechanics and Microengineering. 2011 Jan;21(1). 015016.

Chang B, Routa I, Sariola V, Zhou Q. Self-alignment of RFID dies on four-pad patterns with water droplet for sparse self-assembly. Journal of Micromechanics and Microengineering. 2011 Sep;21(9). 095024.

Gordon TR, Paik T, Klein DR, Naik GV, Caglayan H, Boltasseva A et al. Shape-dependent plasmonic response and directed self-assembly in a new semiconductor building block, indium-doped cadmium oxide (ICO). Nano Letters. 2013 Jun 12;13(6):2857-2863.

Ylönen M, Franc JP, Miettinen J, Saarenrinne P, Fivel M. Shedding frequency in cavitation erosion evolution tracking. International Journal of Multiphase Flow. 2019 Sep 1;118:141-149.

Le T, Lin Z, Wong CP, Tentzeris MM. Smart Skins: Could they be the ultimate sensing tool? Today\uFFFDs industry and personal medical care both strongly demand accurate, reliable, robust, lo. IEEE Nanotechnology Magazine. 2015 Jun 1;9(2):4-10. 7080864.

Netzev M, Angleraud A, Pieters R. Soft robotic gripper with compliant cell stacks for industrial part handling. IEEE Robotics and Automation Letters. 2020 Oct 1;5(4):6821-6828.

Šutka A, Käämbre T, Joost U, Kooser K, Kook M, Duarte RF et al. Solvothermal synthesis derived Co-Ga codoped ZnO diluted magnetic degenerated semiconductor nanocrystals. Journal of Alloys and Compounds. 2018 Sep 30;763:164-172.

Lemougna PN, Yliniemi J, Ismailov A, Levänen E, Tanskanen P, Kinnunen P et al. Spodumene tailings for porcelain and structural materials: Effect of temperature (1050–1200 °C) on the sintering and properties. Minerals Engineering. 2019. 105843.

Luna E, Wu M, Hanke M, Puustinen J, Guina M, Trampert A. Spontaneous formation of three-dimensionally ordered Bi-rich nanostructures within GaAs1-xBix/GaAs quantum wells. Nanotechnology. 2016 Jul 1;27(32). 325603.

Hintikka J, Mäntylä A, Vaara J, Frondelius T, Lehtovaara A. Stable and unstable friction in fretting contacts. Tribology International. 2019 Mar 1;131:73-82.

Andersson P, Kilpi L, Holmberg K, Vaajoki A, Oksanen V. Static friction measurements on steel against uncoated and coated cast iron. Tribologia. 2016 Jan 1;34(1-2):5-40.

Laurila MM, Khorramdel B, Dastpak A, Mäntysalo M. Statistical analysis of E-jet print parameter effects on Ag-nanoparticle ink droplet size. Journal of Micromechanics and Microengineering. 2017 Aug 2;27(9). 095005.

Seidt JD, Kuokkala V-T, Smith JL, Gilat A. Synchronous Full-Field Strain and Temperature Measurement in Tensile Tests at Low, Intermediate and High Strain Rates. Experimental Mechanics. 2017 Feb;57(2):219–229.

Chronopoulos A, Thorpe SD, Cortes E, Lachowski D, Rice AJ, Mykuliak VV et al. Syndecan-4 tunes cell mechanics by activating the kindlin-integrin-RhoA pathway. Nature Materials. 2020.

Sautter JD, Xu L, Miroshnichenko AE, Lysevych M, Volkovskaya I, Smirnova DA et al. Tailoring Second-Harmonic Emission from (111)-GaAs Nanoantennas. Nano Letters. 2019 Jun 12;19(6):3905-3911.

Doddapaneni TRKC, Praveenkumar R, Tolvanen H, Rintala J, Konttinen J. Techno-economic evaluation of integrating torrefaction with anaerobic digestion. Applied Energy. 2018;213:272-284.

Björling M, Miettinen J, Marklund P, Lehtovaara A, Larsson R. The correlation between gear contact friction and ball on disc friction measurements. Tribology International. 2015;83:114-119.

Lindroos M, Apostol M, Heino V, Valtonen K, Laukkanen A, Holmberg K et al. The deformation, strain hardening, and wear behavior of chromium-alloyed hadfield steel in abrasive and impact conditions. Tribology Letters. 2015;57(3). 24.

Järvinen H, Isakov M, Nyyssönen T, Järvenpää M, Peura P. The effect of initial microstructure on the final properties of press hardened 22MnB5 steels. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing. 2016 Oct 31;676:109-120.

Lorimer GW, Dicken R, Peura P, Pilkington R, Younes CM, Allen GC et al. The effect of phosphorous and arsenic on the fracture behaviour of a 2,25% Cr-1% Mo Steel. Materials Science Forum. 1996 Dec 1;207-209(PART 2):645-648.

Nurmi V, Hintikka J, Juoksukangas J, Honkanen M, Vippola M, Lehtovaara A et al. The formation and characterization of fretting-induced degradation layers using quenched and tempered steel. Tribology International. 2019 Mar 1;131:258-267.

Liimatainen H, van Vliet O, Aplyn D. The potential of electric trucks – An international commodity-level analysis. Applied Energy. 2019 Feb 15;236:804-814.

Mishra A, Petit L, Pihl M, Andersson M, Salminen T, Rocherullé J et al. Thermal, structural and in vitro dissolution of antimicrobial copper-doped and slow resorbable iron-doped phosphate glasses. Journal of Materials Science. 2017;52(15):8957–8972.

Rodríguez Ripoll M, Ojala N, Katsich C, Totolin V, Tomastik C, Hradil K. The role of niobium in improving toughness and corrosion resistance of high speed steel laser hardfacings. Materials and Design. 2016 Jun 5;99:509-520.

Hintikka J, Lehtovaara A, Mäntylä A. Third Particle Ejection Effects on Wear with Quenched and Tempered Steel Fretting Contact. TRIBOLOGY TRANSACTIONS. 2017;60(1):70-78.

Jaurola M, Hedin A, Tikkanen S, Huhtala K. TOpti: a flexible framework for optimising energy management for various ship machinery topologies. Journal of Marine Science and Technology (Japan). 2018.

Kuzmin M, Laukkanen P, Mäkelä J, Yasir M, Tuominen M, Dahl J et al. Toward the Atomically Abrupt Interfaces of SiOx/Semiconductor Junctions. Advanced Materials Interfaces. 2016 Jun;3(11). 1500510.

Wu H, Sariola V, Zhu C, Zhao J, Sitti M, Bettinger CJ. Transfer printing of metallic microstructures on adhesion-promoting hydrogel substrates. Advanced Materials. 2015 Jun 1;27(22):3398-3404.

Ryynänen T, Mzezewa R, Meriläinen E, Hyvärinen T, Lekkala J, Narkilahti S et al. Transparent microelectrode arrays fabricated by ion beam assisted deposition for neuronal cell in vitro recordings. Micromachines. 2020 May 1;11(5). 497.

Huttunen-Saarivirta E, Kilpi L, Pasanen AT, Salminen T, Ronkainen H. Tribocorrosion behaviour of tin bronze CuSn12 under a sliding motion in NaCl containing environment: Contact to inert vs. reactive counterbody. Tribology International. 2020 Nov 1;151. 106389.

Mäntyranta A, Heino V, Isotahdon E, Salminen T, Huttunen-Saarivirta E. Tribocorrosion behaviour of two low-alloy steel grades in simulated waste solution. Tribology International. 2019 Oct 1;138:250-262.

Teisala H, Geyer F, Haapanen J, Juuti P, Mäkelä JM, Vollmer D et al. Ultrafast Processing of Hierarchical Nanotexture for a Transparent Superamphiphobic Coating with Extremely Low Roll-Off Angle and High Impalement Pressure. Advanced Materials. 2018;30(14). 1706529.

Barreca D, Carraro G, Gasparotto A, Maccato C, Altantzis T, Sada C et al. Vapor Phase Fabrication of Nanoheterostructures Based on ZnO for Photoelectrochemical Water Splitting. Advanced Materials Interfaces. 2017;4(18). 1700161.

Linjama M. Variable speed digital hydraulic transformer–based servo drive. Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering. 2019.

Linjama M. Variable speed drive with hydraulic boost. International Journal of Fluid Power. 2019;20(1):99-123.

Perttula A, Nguyen N, Collin J, Jokinen J-P. Vehicle type detection and passenger satisfaction analysis using smartphone sensors and digital surveys. IET Intelligent Transport Systems. 2019 Oct 1;13(10):1499-1506.

Zhang H, Zeng H, Priimägi A, Ikkala O. Viewpoint: Pavlovian Materials—Functional Biomimetics Inspired by Classical Conditioning. Advanced Materials. 2020. 1906619.

Bolelli G, Milanti A, Lusvarghi L, Trombi L, Koivuluoto H, Vuoristo P. Wear and impact behaviour of High Velocity Air-Fuel sprayed Fe-Cr-Ni-B-C alloy coatings. Tribology International. 2016;95:372-390.

Haiko O, Heino V, Porter DA, Uusitalo J, Kömi J. Effect of microstructure on the abrasive wear resistance of steels with hardness 450 HV. Tribologia. 2019;36(1):54-57.

Matikainen V, Rubio Peregrina S, Ojala N, Koivuluoto H, Schubert J, Houdková et al. Slurry and dry particle erosion wear properties of WC-10Co4Cr and Cr3C2-25NiCr hardmetal coatings deposited by HVOF and HVAF spray processes. Tribologia. 2019;36(1-2):58-61.