Silver-Decorated TiO2 Inverse Opal Structure for Visible Light-Induced Photocatalytic Degradation of Organic Pollutants and Hydrogen Evolution

Enhancing piezoelectric properties of bacterial cellulose films by incorporation of MnFe2O4 nanoparticles

Light-fuelled freestyle self-oscillators

Electronic couplings and rates of excited state charge transfer processes at poly(thiophene-co-quinoxaline)–PC71BM interfaces: two- versus multi-state treatments

Electronically Coupled Uranium and Iron Oxide Heterojunctions as Efficient Water Oxidation Catalysts

Chemical Dissolution of Pt(111) During Potential Cycling Under Negative pH Conditions Studied by Operando X-ray Photoelectron Spectroscopy

Pinacol-Derived Chlorohydrosilane in Metal-Free Reductive Amination for the Preparation of Tertiary Alkylphenolmethyl Amines

Microstructure-property relationships of novel ultra-high strength press hardening steels

Composite Hydrogels Using Bioinspired Approach with in Situ Fast Gelation and Self-Healing Ability as Future Injectable Biomaterial

Economic analysis of hydrogen production by methane thermal decomposition

Comparison to competing technologies

Charge Shift/Recombination and Triplet Formation in a Closely-Spaced Molecular Dyad based on a Borondipyrromethene (Bodipy) and an Expanded Acridinium Cation

Entrapped Styrene Butadiene Polymer Chains by Sol-Gel-Derived Silica Nanoparticles with Hierarchical Raspberry Structures

Valorization of Finnish mining tailings for use in the ceramics industry

Convenient extraction method for quantification of thin zinc patina layers

Noncovalent functionalization of reduced graphene oxide with pluronic F127 and its nanocomposites with gum arabic

Methane thermal decomposition in regenerative heat exchanger reactor: Experimental and modeling study

Tailored Fabrication of Transferable and Hollow Weblike Titanium Dioxide Structures

Engineering and Characterization of Bacterial Nanocellulose Films as Low Cost and Flexible Sensor Material

On the effect of deformation twinning and microstructure to strain hardening of high manganese austenitic steel 3D microstructure aggregates at large strains

Characterization of endoglucanase rich Trichoderma reesei cellulase mixtures and their effect on alkaline solubility of dissolving pulp

Photocatalytic and antibacterial properties of ZnO films with different surface topographies on stainless steel substrate

Thermo-catalytic decomposition of methane

The effect of reaction parameters on process design and the utilization possibilities of the produced carbon

Sustainable nutrients recovery and recycling by optimizing the chemical addition sequence for struvite precipitation from raw swine slurries

Improving Recovery Boiler Availability through Understanding Fume Behavior

Techno-economic analysis of four concepts for thermal decomposition of methane: Reduction of CO2 emissions in natural gas combustion

Remarkable Dependence of the Final Charge Separation Efficiency on the Donor-Acceptor Interaction in Photoinduced Electron Transfer

Machine-coated starch-based dispersion coatings prevent mineral oil migration from paperboard

Corrosion products of carbonation induced corrosion in existing reinforced concrete facades

Enhanced pre-treatment of cellulose pulp prior to dissolution into NaOH/ZnO

Cracking resistance of Cr3C2–NiCr and WC–Cr3C2–Ni thermally sprayed coatings under tensile bending stress

The Effect of Phosphorus Exposure on Diesel Oxidation Catalysts-Part II

Characterization of Structural Changes by Transmission Electron Microscopy

The Effect of Phosphorus Exposure on Diesel Oxidation Catalysts-Part I

Activity Measurements, Elementary and Surface Analyses

Measuring synthesis yield in graphene oxide synthesis by modified hummers method

Coating of Silica and Titania Aerosol Nanoparticles by Silver Vapor Condensation

Electrospun Black Titania Nanofibers

Influence of Hydrogen Plasma-Induced Disorder on the Electronic Structure and Photoelectrochemical Performance

Low temperature temporal and spatial atomic layer deposition of TiO2 films

Dissolution of enzyme-treated cellulose using freezing thawing method and the properties of fibres regenerated from the solution

Impact of mechanical and enzymatic pretreatments on softwood pulp fiber wall structure studied with NMR spectroscopy and X-ray scattering

High temperature oxidation tests for the high velocity solution precursor flame sprayed manganese-cobalt oxide spinel protective coatings on SOFC interconnector steel

Preferential Attachments of Organic Dyes onto {101} Facets of TiO2 Nanoparticles

Fermentative metabolism of an anaerobic, thermophilic consortium on plant polymers and commercial paper samples

Effect of rheological properties of dissolved cellulose/microfibrillated cellulose blend suspensions on film forming

Perfluoro-1,1′-biphenyl and perfluoronaphthalene and their derivatives as π-acceptors for anions

High-temperature slurry erosion of vinylester matrix composites – The effect of test parameters

Synthesis, crystal structure, spectral, dielectric characteristics and conduction mechanism of two novel carboxylates of 1-benzhydrylpiperazine

Effect of alkali and silane surface treatments on regenerated cellulose fibre type (Lyocell) intended for composites

The effect of the outermost fibre layers on solubility of dissolving grade pulp

From partial to complete optical erasure of azobenzene-polymer gratings: effect of molecular weight

N-Alkyl ammonium resorcinarene salts

multivalent halogen-bonded deep-cavity cavitands

Numerical modeling of fine particle and deposit formation in a recovery boiler

Creation of superhydrophilic surfaces of paper and board

The effects of UV irradiation to polyetheretherketone fibres

Characterization by different techniques

Improving the extensibility, wet web and dry strength of paper by addition of agar

Modelling fume deposit growth in recovery boilers: effect of flue gas and deposit temperature

The effect of flame treatment on surface properties and heat sealability of low-density polyethylene coating

High- and low-adhesive superhydrophobicity on the liquid flame spray-coated board and paper: structural effects on surface wetting and transition between the low- and high-adhesive states

Wettability conversion on the liquid flame spray generated superhydrophobic TiO2 nanoparticle coating on paper and board by photocatalytic decomposition of spontaneously accumulated carbonaceous overlayer

Adhesion of Extrusion-Coated Polymer Sealing Layers to a Fiber-Based Packaging Material with an Atomic Layer Deposited Aluminum Oxide Surface Coating

Nanostructures Increase Water Droplet Adhesion on Hierarchically Rough Superhydrophobic Surfaces

Top layer coatability on barrier coatings

Toward more controlled, nanoscale barrier layers in packaging

Atmospheric synthesis of superhydrophobic TiO2 nanoparticle deposits in a single step using Liquid Flame Spray

Surface chemical analysis of photocatalytic wettability conversion of TiO2 nanoparticle coating

Surface chemical characterization of nanoparticle coated paperboard

Nanoparticle Deposition from Liquid Flame Spray onto Moving Roll-to-Roll Paperboard Material

Atomic layer deposition on polymer based flexible packaging materials: Growth characteristics and diffusion barrier properties

Utilisation of continuous atomic layer deposition process for barrier enhancement of extrusion-coated paper

Effects of flame and corona treatment on extrusion coated paper properties

Adhesion Mechanism of Water Droplets on Hierarchically Rough Superhydrophobic Rose Petal Surface

Digital imaging measurement of dense multiphase flows in industrial processes

Bio-Hybrid Nanocomposite Coatingas from Sonicated Chitosan and Nanoclay

Effect of fibre properties on flocculation and fractionation of cellulosic fibres in dry state

The name of the thesis: Atmospheric Plasma Treatment in Extrusion Coating, Topic: The Effect of Flame Treatment on the Sealability of Extrusion Coated Paper

The name of the thesis: Surface Treatment in Extrusion Coating, Topic: The Influence of Corona and Flame Treatment on Sealability of Extrusion Coated Paper

Influence of Atmospheric Plasma Treatment on Surface Properties and Inkjet Printability of Plastic Packaging Film

Solution Modified Fumed Silica and Its Effect on Charge Trapping Behavior of PP/POE/Silica Nanodielectrics

High performance wear and corrosion resistant coatings by novel cladding techniques

Simulation of ash-forming compounds in the kraft recovery boiler

Corrosion propagation phase studies on Finnish reinforced concrete facades

Design driven world of cellulose-from bulk to luxury?

The Effect of ELF electric fields on Implantable Cardioverter Defibrillators (ICD)

The effects of coating structure and water-holding capacity on the oxygen-scavenging capacity of enzymes embedded in the coating layer

Nanoscale surface processing of extrusion coated substrates and plastic films with atmospheric plasma activation and deposition

Flame deposition of superhydrophobic and superhydrophilic nanoparticle coating on paperboard materials

Top layer coatability on barrier coatings

Atmospheric Plasma Treatment of Plastic Packaging Film: Effects on Surface Properties and UV Inkjet Printability

Nanoscale Surface Processing of Extrusion Coated Substrates and Plastic Films with Atmospheric Plasma Activation and Deposition

Effect of Pigment Volume Concentration and Drying Aspects on the Enzyme Activity of Clay Coatings

Two-phase PIV/PTV measurement of bubbly flow across pin fins in a micro-channel

Development of sustainable paper coatings using nanoscale industrial

Image based measurement of particle phase reynolds stresses in a laboratory scale circulating fluidized bed

Diffusion of acidic solution through rubber at high temperature and its effect on metal-rubber interface degradation

Research on icing behavior and ice adhesion testing of icephobic surfaces

Two-component aerosol nanoparticle coating for paperboard on roll-to-roll process

Deposition of flame synthesised nanoparticles on paperboard surface

Atomic layer deposition process for barrier applications of flexible packaging

The effect of physical adhesion promotion treatments on interfacial adhesion in cellulose-epoxy composite

Towards material excellence

Evaluation of Tekes' programmes on materials

Anaerobic treatment and resource recovery from methanol rich waste gases and wastewaters

Modeling Fume Particle Dynamics and Deposition with Alkali Metal Chemistry in Kraft Recovery Boilers

Titanium oxide based nanoparticles by laser ablation in supercritical carbon dioxide

Utilization of CO2 in modification of galvanized steel surface