Priimägi, Arri (Editor) ; Hecht, Stefan (Editor). / Special Issue: From Responsive Materials to Interactive Materials. In: Advanced Materials. 2020 ; Vol. 32, No. 20.

Heininen, Arttu ; Aaltonen, Jussi ; Koskinen, Kari T. / Simulating the Drag Coefficient of a Spherical Autonomous Underwater Vehicle. Proceedings of the 2nd Annual SMACC Research Seminar 2017. editor / Jussi Aaltonen ; Riikka Virkkunen ; Kari T. Koskinen ; Risto Kuivanen. Vol. 2 Tampere : Tampere University of Technology, 2017. pp. 53-56

Priimägi, Arri (Editor) ; Hecht, Stefan (Editor). / From Responsive Molecules to Interactive Materials. In: Advanced Materials. 2020 ; Vol. 32, No. 20.

Matikainen, V. ; Rubio Peregrina, S. ; Ojala, N. ; Koivuluoto, H. ; Schubert, J. ; Houdková, ; Vuoristo, P. / Slurry and dry particle erosion wear properties of WC-10Co4Cr and Cr3C2-25NiCr hardmetal coatings deposited by HVOF and HVAF spray processes. In: Tribologia. 2019 ; Vol. 36, No. 1-2. pp. 58-61.

Haiko, O. ; Heino, V. ; Porter, D. A. ; Uusitalo, J. ; Kömi, J. / Effect of microstructure on the abrasive wear resistance of steels with hardness 450 HV. In: Tribologia. 2019 ; Vol. 36, No. 1. pp. 54-57.

Di Vito, Donato ; Mosallaei, Milad ; Vahed, Behnam Khorramdel ; Kanerva, Mikko ; Mäntysalo, Matti. / Deformability analysis and improvement in stretchable electronics systems through finite element analysis. Proceedings of XXIV AIMETA Conference 2019. editor / Antonio Carcaterra ; Giorgio Graziani ; Achille Paolone. Springer, 2020. pp. 755-763 (Lecture Notes in Mechanical Engineering).

Gusrialdi, Azwirman ; Xu, Ying ; Qu, Zhihua ; Simaan, Marwan A. / Resilient Cooperative Voltage Control for Distribution Network with High Penetration Distributed Energy Resources. European Control Conference 2020, ECC 2020. IEEE, 2020. pp. 1533-1539

Singh, Arun Kumar ; Ahonen, Andrei ; Ghabcheloo, Reza ; Mueller, Andreas. / Introducing Multi-Convexity in Path Constrained Trajectory Optimization for Mobile Manipulators. European Control Conference 2020, ECC 2020. IEEE, 2020. pp. 1178-1185

Mäenpää, Pekka ; Aref, Mohammad M. ; Mattila, Jouni. / FORMI: A Fast Holonomic Path Planning and Obstacle Representation Method Based on Interval Analysis. Proceedings of the IEEE 2019 9th International Conference on Cybernetics and Intelligent Systems and Robotics, Automation and Mechatronics, CIS and RAM 2019. IEEE, 2019. pp. 398-403 (IEEE International Conference on Cybernetics and Intelligent Systems).

Motlagh, Hamid Didari Khamseh ; Lotfi, Faraz ; Taghirad, Hamid D. ; Germi, Saeed Bakhshi. / Position Estimation for Drones based on Visual SLAM and IMU in GPS-denied Environment. ICRoM 2019 - 7th International Conference on Robotics and Mechatronics. IEEE, 2019. pp. 120-124

Koivikko, Anastasia ; Sariola, Veikko. / Fabrication of soft devices with buried fluid channels by using sacrificial 3D printed molds. 2019 2nd IEEE International Conference on Soft Robotics (RoboSoft). IEEE, 2019. pp. 509-513

Wendel, Sebastian ; Karamanakos, Petros ; Dietz, Armin ; Kennel, Ralph. / Operating point dependent variable switching point predictive current control for PMSM drives. PRECEDE 2019: 2019 IEEE International Symposium on Predictive Control of Electrical Drives and Power Electronics. IEEE, 2019. pp. 1-6

Rossi, Mattia ; Liegmann, Eyke ; Karamanakos, Petros ; Castelli-Dezza, Francesco ; Kennel, Ralph. / Direct model predictive power control of a series-connected modular rectifier. PRECEDE 2019: 2019 IEEE International Symposium on Predictive Control of Electrical Drives and Power Electronics. IEEE, 2019. pp. 1-6

Lahti, Johanna. / Nanocellulose and Polylactic Acid Based Multilayer Coatings for Barrier Applications. 17th Biennial TAPPI European PLACE Conference 2019. TAPPI Press, 2019. pp. 446-455

Lahti, Johanna. / Market implementation of active and intelligent packaging-opportunities from a socio-economic perspective. 17th Biennial TAPPI European PLACE Conference 2019. TAPPI Press, 2019. pp. 419-427

Suokas, Esa. / Effect of polyolefin molecular structure on product properties in extrusion coating. 17th Biennial TAPPI European PLACE Conference 2019. TAPPI Press, 2019. pp. 89-98

Liikanen, Henri ; Aref, Mohammad M. ; Mattila, Jouni. / M-Estimator Application in Real-Time Sensor Fusion for Smooth Position Feedback of Heavy-Duty Field Robots. Proceedings of the IEEE 2019 9th International Conference on Cybernetics and Intelligent Systems (CIS) and IEEE Conference on Robotics, Automation and Mechatronics (RAM). IEEE, 2019. pp. 368-373 (IEEE International Conference on Cybernetics and Intelligent Systems).

Cao, Xuepeng ; Aref, Mohammad M. ; Mattila, Jouni. / Design and Control of a Flexible Joint as a Hydraulic Series Elastic Actuator for Manipulation Applications. Proceedings of the IEEE 2019 9th International Conference on Cybernetics and Intelligent Systems and Robotics, Automation and Mechatronics, CIS and RAM 2019. IEEE, 2019. pp. 553-558 (IEEE International Conference on Cybernetics and Intelligent Systems).

Far, Mehrnaz Farzam ; Mustafa, Bilal ; Martin, Floran ; Rasilo, Paavo ; Belahcen, Anouar. / Flux-Weakening Control for IPMSM Employing Model Order Reduction. 2018 23rd International Conference on Electrical Machines, ICEM 2018. IEEE, 2018. pp. 1510-1516

Far, Mehrnaz Farzam ; Mukherjee, Victor ; Martin, Floran ; Rasilo, Paavo ; Belahcen, Anouar. / Model Order Reduction of Bearingless Reluctance Motor Including Eccentricity. 2018 23rd International Conference on Electrical Machines, ICEM 2018. IEEE, 2018. pp. 2243-2249

Teke, Burak ; Lanz, Minna ; Kämäräinen, Joni-Kristian ; Hietanen, Antti. / Real-time and Robust Collaborative Robot Motion Control with Microsoft Kinect ® v2. 2018 14th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications, MESA 2018. IEEE, 2018.

Mäkinen, Petri ; Mononen, Teemu ; Mattila, Jouni. / Inertial Sensor-Based State Estimation of Flexible Links Subject to Bending and Torsion. 2018 14th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications, MESA 2018. IEEE, 2018.

Mahmoodpour, Mehdi ; Lobov, Andrei ; Lanz, Minna ; Mäkelä, Petteri ; Rundas, Niko. / Role-based visualization of industrial IoT-based systems. 2018 14th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications, MESA 2018. IEEE, 2018.

Ghabcheloo, Reza ; Siddiqui, Shadman. / Complete Odometry Estimation of a Vehicle Using Single Automotive Radar and a Gyroscope. MED 2018 - 26th Mediterranean Conference on Control and Automation. IEEE, 2018. pp. 855-860

Soltani, Ayat ; Curtze, S. ; Lahti, J. ; Järvelä, K. ; Laurikka, J. ; Hokka, M. ; Kuokkala, V. T. / Digital image correlation study of the deformation and functioning of the human heart during open-heart surgery. Mechanics of Biological Systems, Materials and other topics in Experimental and Applied Mechanics - Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics. Vol. 4 Springer New York LLC, 2018. pp. 19-27 (Conference Proceedings of the Society for Experimental Mechanics).

Vazquez Fernandez, N. ; Isakov, M. ; Hokka, M. ; Kuokkala, V. T. / Effects of adiabatic heating estimated from tensile tests with continuous heating. Dynamic Behavior of Materials - Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics. Vol. 1 Springer New York LLC, 2018. pp. 1-7 (Conference Proceedings of the Society for Experimental Mechanics).

Coatanéa, Eric ; Wu, Di ; Tsarkov, Vadim ; Gary Wang, G. ; Modi, Siddhant ; Jafarian, Hesam. / Knowledge-based artificial neural network (KB-ANN) in engineering : Associating functional architecture modeling, dimensional analysis and causal graphs to produce optimized topologies for KB-ANNs. 38th Computers and Information in Engineering Conference. Vol. 1B-2018 The American Society of Mechanical Engineers ASME, 2018.

Pyrhönen, Veli-Pekka ; Koivisto, Hannu ; Vilkko, Matti. / A Reduced-Order Two-Degree-of-Freedom Composite Nonlinear Feedback Control for a Rotary DC Servo Motor. Proceedings of the 56th IEEE Conference on Decision and Control. Melbourne, Australia, 2017. pp. 2065-2071

Kreutzer, Joose ; Viehrig, Marlitt ; Maki, Antti-Juhana ; Kallio, Pasi ; Rahikainen, Rolle ; Hytönen, Vesa. / Pneumatically actuated elastomeric device for simultaneous mechanobiological studies & live-cell fluorescent microscopy. International Conference on Manipulation, Automation and Robotics at Small Scales, MARSS 2017 - Proceedings. IEEE, 2017.

Palagi, Stefano ; Mark, Andrew G. ; Melde, Kai ; Qiu, Tian ; Zeng, Hao ; Parmeggiani, Camilla ; Martella, Daniele ; Wiersma, Diederik S. ; Fischer, Peer. / Locomotion of light-driven soft microrobots through a hydrogel via local melting. International Conference on Manipulation, Automation and Robotics at Small Scales, MARSS 2017 - Proceedings. IEEE, 2017.

Kivelä, Tuomo ; Mattila, Jouni ; Puura, Jussi ; Launis, Sirpa. / Redundant robotic manipulator path planning for real-time obstacle and self-collision avoidance. Advances in Service and Industrial Robotics: Proceedings of the 26th International Conference on Robotics in Alpe-Adria-Danube Region, RAAD 2017. editor / Carlo Ferraresi ; Giuseppe Quaglia. Springer International Publishing, 2017. pp. 208-216 (Mechanisms and Machine Science).

Lahti, Johanna ; Kuusipalo, Jurkka ; Auvinen, Sanna. / Novel equipment to simulate hot air heat sealability of packaging materials. 16th TAPPI European PLACE Conference 2017. TAPPI Press, 2017. pp. 237-248

Suokas, Esa. / Effect of air gap on the adhesion of PET layer on cardboard substrate in extrusion coating. 16th TAPPI European PLACE Conference 2017. TAPPI Press, 2017. pp. 529-544

Lahti, Johanna ; Kamppuri, Taina ; Kuusipalo, Jurkka. / Novel bio-based materials for active and intelligent packaging. 16th TAPPI European PLACE Conference 2017. TAPPI Press, 2017.

Kuusipalo, Jurkka ; Lahti, Johanna. / Tampere University of Technology, laboratory of materials science, paper converting and packaging technology Tampere, Finland. 16th TAPPI European PLACE Conference 2017: Basel; Switzerland; 22 May 2017 through 24 May 2017. Vol. May-2017 TAPPI Press, 2017.

Koivuluoto, Heli ; Milanti, Andrea ; Bolelli, Giovanni ; Latokartano, Jyrki ; Marra, Francesco ; Pulci, Giovanni ; Vihinen, Jorma ; Lusvarghi, Luca ; Vuoristo, Petri. / Structures and properties of laser-assisted cold-sprayed aluminum coatings. THERMEC 2016. Vol. 879 Trans Tech Publications Ltd, 2017. pp. 984-989 (Materials Science Forum).

Mikkonen, Antti ; Karvinen, Reijo. / Heat Transfer of Impinging Jet : Effect of Compressibility and Turbulent Kinetic Energy Production. IX International Conference on Computational Heat and Mass Transfer (ICCHMT 2016) . 2017.

Wu, Di ; Coatanea, Eric ; Wang, G. Gary. / Dimension reduction and decomposition using causal graph and qualitative analysis for aircraft concept design optimization. 43rd Design Automation Conference. The American Society of Mechanical Engineers ASME, 2017.

Mikkonen, Antti ; Karvinen, Reijo. / Solar Panel Breakage During Heavy Rain Caused by Thermal Stress. Engineered Transparency 2016: Glass in Architechture and Structural Engineering. Wiley, 2016.

Ellman, Asko ; Wendrich, Robert ; Tiainen, Tarja. / Framework and feasibility study for pairwise comparison tool. Proceedings of the ASME 2016 Computers and Information in Engineering Conference IDETC/CIE 2016. Charlotte, North Carolina : ASME, 2016.

Hokka, Mikko ; Mirow, Nikolas ; Nagel, Horst ; Vogt, Sebastian ; Kuokkala, Veli-Tapani. / DIC measurements of the human heart during cardiopulmonary bypass surgery. Conference Proceedings of the Society for Experimental Mechanics Series. Vol. 6 Springer New York LLC, 2016. pp. 51-59

Lahti, Johanna. / Nanoscale barrier coating on BOPP packaging film by ALD. TAPPI PLACE Conference 2016: Exploring New Frontiers. TAPPI Press, 2016. pp. 493-505

Hartikainen, Juha ; Kolari, Kari ; Kouhia, Reijo. / Development and numerical implementation of an anisotropic continuum damage model for concrete. Advances in Fracture and Damage Mechanics XV. Trans Tech Publications Ltd, 2016. pp. 115-118 (Key Engineering Materials).

Mäkinen, Jari ; Fränti, Keijo ; Korhonen, Matti ; Fillion, Joshua ; Heinisuo, Markku. / End-plate connections in Bi-axial bending - Measurements. 13th International Aluminium Conference, Sustainability, Durability and Structural Advantages, : INALCO 2016; Naples; Italy; 21 September 2016 through 23 September 2016. editor / F. M. Mazzolani ; A. Squillace ; B. Faggiano ; F. Bellucci . Vol. 710 Trans Tech Publications Ltd, 2016. pp. 275-280 (Key Engineering Materials).

Mendes, Miguel Rodrigues ; Subramaniyam, Narayan Puthanmadam ; Wendel-Mitoraj, Katrina. / Evaluating the electrode measurement sensitivity of subdermal electroencephalography electrodes. International IEEE/EMBS Conference on Neural Engineering, NER. Vol. 2015-July IEEE COMPUTER SOCIETY PRESS, 2015. pp. 1092-1095

Subramaniyam, Narayan Puthanmadam ; Hyttinen, Jari ; Hatsopoulos, Nicholas G. ; Takahashi, Kazutaka. / Recurrence network analysis of wide band oscillations of local field potentials from the primary motor cortex reveals rich dynamics. International IEEE/EMBS Conference on Neural Engineering, NER. IEEE COMPUTER SOCIETY PRESS, 2015. pp. 960-963

Tanskanen, Jarno M. A. ; Kapucu, Fikret E. ; Hyttinen, Jari A. K. / On the threshold based neuronal spike detection, and an objective criterion for setting the threshold. International IEEE/EMBS Conference on Neural Engineering, NER. IEEE COMPUTER SOCIETY PRESS, 2015. pp. 1016-1019

Hokka, M. ; Östman, K. ; Rämö, J. ; Kuokkala, V. T. / High Temperature Tension HSB Device Based on Direct Electrical Heating. Dynamic Behavior of Materials, Volume 1: Proceedings of the 2014 Annual Conference on Experimental and Applied Mechanics. editor / Bo Song ; Daniel Casem ; Jamie Kimberley. Vol. 65 Springer, 2015. pp. 227-233 (Conference Proceedings of the Society for Experimental Mechanics Series).

Pylkkänen, Kari ; Nurmikolu, Antti ; Guthrie, W. Spencer ; Argyle, Hillary M. / Measurements and Modeling of Frost Depth in Railway Tracks. Proceedings of the International Conference on Cold Regions Engineering: 16th International Conference on Cold Regions Engineering 2015. American Society of Civil Engineers ASCE, 2015. pp. 123-134

Mäkelä, Jyrki M. ; Haapanen, Janne ; Aromaa, Mikko ; Teisala, Hannu ; Tuominen, Mikko ; Stepien, Milena ; Saarinen, Jarkko J. ; Toivakka, Martti ; Kuusipalo, Jurkka. / Roll-to-roll coating by liquid flame spray nanoparticle deposition. Materials Research Society Symposium Proceedings. Vol. 1747 MATERIALS RESEARCH SOCIETY, 2015. pp. 37-42

Martinez, Francisco ; Neculqueo, Gloria ; Vasquez, Sergio O. ; Lemmetyinen, Helge ; Efimov, Alexander ; Vivo, Paola. / Branched thiophene oligomer/polymer bulk heterojunction organic solar cell. Materials Research Society Symposium Proceedings. Vol. 1737 MATERIALS RESEARCH SOCIETY, 2015. pp. 19-25

Lahti, Johanna ; Johansson, Petri ; Lahtinen, Kimmo ; Cameron, David C. ; Seppänen, Tarja. / Improving the effect of nanoscale barrier coating on BOPP film properties : Influence of substrate contamination, web handling and pretreatments. TAPPI PLACE Conference 2014. Vol. 2 TAPPI Press, 2014. pp. 1039-1061

Coatanéa, Eric ; Nonsiri, Sarayut ; Christophe, Francois ; Mokammel, Faisal. / Graph based representation and analyses for conceptual stages. 34th Computers and Information in Engineering Conference. Vol. 1A The American Society of Mechanical Engineers ASME, 2014.

Saintsing, Christy D. ; Cook, Benjamin S. ; Tentzeris, Manos M. / An origami inspired reconfigurable spiral antenna. 38th Mechanisms and Robotics Conference. Vol. 5B The American Society of Mechanical Engineers ASME, 2014.

Mokammel, Faisal ; Coatanea, Eric ; Christophe, Francois ; Ba Khouya, Mohamed ; Medyna, Galina. / Towards an approach for evaluating the quality of requirements. 33rd Computers and Information in Engineering Conference. Vol. 2 B American Society of Mechanical Engineers, 2013.

Alatalo, Matti ; Pitkänen, Heikki ; Ropo, Matti ; Kokko, Kalevi ; Vitos, Levente. / Modeling of steels and steel surfaces using quantum mechanical first principles methods. Physical and Numerical Simulation of Materials Processing VII. Vol. 762 2013. pp. 445-450 (Materials Science Forum).

Ronkainen, Helena ; Kanerva, Ulla ; Varis, Tommi ; Ruusuvuori, Kimmo ; Turunen, Erja ; Peräntie, Jani ; Putaala, Jussi ; Juuti, Jari ; Jantunen, Heli. / Materials for electronics by thermal spraying. Physical and Numerical Simulation of Materials Processing VII. Vol. 762 2013. pp. 451-456 (Materials Science Forum).

Lahtinen, Kimmo ; Lahti, Johanna ; Johansson, Petri ; Seppänen, Tarja ; Cameron, David C. / Improving the effect of a nanoscale barrier coating on BOPP film properties by surface pretreatments. 14th European PLACE Conference 2013. Vol. 1 TAPPI Press, 2013. pp. 469-493

Rasilo, Paavo ; Belahcen, Anouar ; Arkkio, Antero. / Effect of rotor pole-shoe construction on losses of inverter-fed synchronous motors. Proceedings - 2012 20th International Conference on Electrical Machines, ICEM 2012. 2012. pp. 1282-1286

Caraffi, Claudio ; Vojir, Tomáš ; Trefný, Jiří ; Šochman, Jan ; Matas, Jiří. / A system for real-time detection and tracking of vehicles from a single car-mounted camera. 2012 15th International IEEE Conference on Intelligent Transportation Systems, ITSC 2012. 2012. pp. 975-982

Borah, Dipu ; Rasappa, Sozaraj ; Kosmala, Barbara ; Holmes, Justin D. ; Morris, Michael A. / Block copolymer self-assembly on ethylene glycol (EG) self-assembled monolayer (SAM) for nanofabrication. Nanoscale Materials Modification by Photon, Ion, and Electron Beams. Vol. 1450 2012. pp. 8-13

Yang, Dazhi ; Feng, Yakai ; Behl, Marc ; Lendlein, Andreas ; Zhao, Haiyang ; Khan, Musammir ; Guo, Jintang. / Biomimetic hemo-compatible surfaces of polyurethane by grafting copolymer brushes of poly(ethylene glycol) and poly(phosphorylcholine methacrylate). Multifunctional Polymer-Based Materials. Vol. 1403 2012. pp. 171-176

Medyna, Galina ; Coatanea, Eric ; Millet, Dominique. / Evaluation of parts of a boat cabin based on exergy - Focusing on environmental and economic assessments. ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011. Vol. 4 PARTS A AND B. ed. AMER SOC MECHANICAL ENGINEERS, 2011. pp. 1083-1092

Christophe, François ; Ritola, Tuomas ; Coatanéa, Eric ; Bernard, Alain. / Semantic analysis of function-solution duality. ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011. Vol. 3 2011. pp. 611-619

Teisala, Hannu ; Tuominen, Mikko ; Aromaa, Mikko ; Mäkelä, Jyrki M. ; Stepien, Milena ; Saarinen, Jarkko J. ; Toivakka, Martti ; Kuusipalo, Jurkka. / Nanoparticle deposition on packaging materials by the liquid flame spray. 13th European PLACE Conference 2011. Vol. 1 2011.

Vähä-Nissi, M. ; Hirvikorpi, T. ; Sievänen, J. ; Salo, E. ; Harlin, A. ; Johansson, P. ; Kuusipalo, J. / Effect of pre-treatments on barrier properties of layers applied by atomic layer deposition onto polymer-coated substrates. 13th European PLACE Conference 2011. Vol. 1 2011. pp. 447

Coatanéa, Eric ; Ritola, Tuomas ; Tumer, Irem Y. ; Jensen, David. / A framework for building behavioral models for design-stage failure identification using dimensional analysis. Proceedings of the ASME Design Engineering Technical Conference. Vol. 5 AMER SOC MECHANICAL ENGINEERS, 2010. pp. 591-601

Lahti, Johanna ; Tuominen, Mikko ; Penttinen, Tapani ; Räsänen, Jari P. ; Kuusipalo, Jurkka. / The effects of corona and flame treatment : Part 2. PE-HD and PP coated papers. TAPPI Press - 12th European PLACE Conference 2009. Vol. 1 2009. pp. 278-314

Coatanéa, Eric ; Yannou, Bernard ; Honkala, Sauli ; Lajunen, Antti ; Saarelainen, Tanja ; Makkonen, Petri. / Measurement theory and dimensional analysis : Methodological impact on the comparison and evaluation process. 19th International Conference on Design Theory and Methodology and 1st International Conference on Micro and Nano Systems, presented at - 2007 ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2007. AMER SOC MECHANICAL ENGINEERS, 2008. pp. 173-182

Lahtinen, Kimmo ; Kuusipalo, Jurkka. / Statistical modeling of water vapor transmission rates for extrusion-coated papers. TAPPI 2008 PLACE Conference: Innovations in Flexible Consumer Packaging. 2008.

Ahonen, Toni ; Hanski, Jyri ; Hyvärinen, Matti ; Kortelainen, Helena ; Uusitalo, Teuvo ; Vainio, Henri ; Kunttu, Susanna ; Koskinen, Kari. / Enablers and barriers of smart data-based asset management services in industrial business networks. Lecture Notes in Mechanical Engineering. Pleiades Publishing, 2019. pp. 51-60 (Lecture Notes in Mechanical Engineering).

Seppälä, Jari ; Salmenperä, Mikko. / Towards dependable automation. Cyber Security: Analytics, Technology and Automation: Part IV. Springer International Publishing, 2015. pp. 229-249 (Intelligent Systems, Control and Automation: Science and Engineering).

Santa-aho, Suvi ; Laitinen, Arttu ; Sorsa, Aki ; Vippola, Minnamari. / Barkhausen Noise Probes and Modelling : A Review. In: Journal of Nondestructive Evaluation. 2019 ; Vol. 38, No. 4.

Boardman, A. D. ; Alberucci, A. ; Assanto, G. ; Grimalsky, V. V. ; Kibler, B. ; McNiff, J. ; Nefedov, I. S. ; Rapoport, Yu G. ; Valagiannopoulos, C. A. / Waves in hyperbolic and double negative metamaterials including rogues and solitons. In: Nanotechnology. 2017 ; Vol. 28, No. 44.

Teisala, Hannu ; Tuominen, Mikko ; Kuusipalo, Jurkka. / Superhydrophobic Coatings on Cellulose-Based Materials : Fabrication, Properties, and Applications. In: Advanced Materials Interfaces. 2014 ; Vol. 1, No. 1. pp. 1-20.

Lappalainen, Kari ; Wang, Guang C. ; Kleissl, Jan. / Estimation of the largest expected photovoltaic power ramp rates. In: Applied Energy. 2020 ; Vol. 278.

Huttunen-Saarivirta, E. ; Kilpi, L. ; Pasanen, A. T. ; Salminen, T. ; Ronkainen, H. / Tribocorrosion behaviour of tin bronze CuSn12 under a sliding motion in NaCl containing environment : Contact to inert vs. reactive counterbody. In: Tribology International. 2020 ; Vol. 151.

Kivioja, Henna ; Vinha, Juha. / Hot-box measurements to investigate the internal convection of highly insulated loose-fill insulation roof structures. In: Energy and Buildings. 2020 ; Vol. 216.

Ryynänen, Tomi ; Mzezewa, Ropafadzo ; Meriläinen, Ella ; Hyvärinen, Tanja ; Lekkala, Jukka ; Narkilahti, Susanna ; Kallio, Pasi. / Transparent microelectrode arrays fabricated by ion beam assisted deposition for neuronal cell in vitro recordings. In: Micromachines. 2020 ; Vol. 11, No. 5.

Shevkunov, Igor ; Katkovnik, Vladimir ; Claus, Daniel ; Pedrini, Giancarlo ; Petrov, Nikolay V. ; Egiazarian, Karen. / Hyperspectral phase imaging based on denoising in complex-valued eigensubspace. In: Optics and Lasers in Engineering. 2020 ; Vol. 127.

Belardini, Alessandro ; Leahu, Grigore ; Petronijevic, Emilija ; Hakkarainen, Teemu ; Koivusalo, Eero ; Piton, Marcelo Rizzo ; Talmila, Soile ; Guina, Mircea ; Sibilia, Concita. / Circular dichroism in the second harmonic field evidenced by asymmetric AU coated gaas nanowires. In: Micromachines. 2020 ; Vol. 11, No. 2. pp. 1-8.

Chronopoulos, Antonios ; Thorpe, Stephen D. ; Cortes, Ernesto ; Lachowski, Dariusz ; Rice, Alistair J. ; Mykuliak, Vasyl V. ; Rog, Tomasz ; Lee, David A. ; Hytönen, Vesa P. ; del Río Hernández, Armando E. / Syndecan-4 tunes cell mechanics by activating the kindlin-integrin-RhoA pathway. In: Nature Materials. 2020.

Zhang, Hang ; Zeng, Hao ; Priimägi, Arri ; Ikkala, Olli. / Viewpoint : Pavlovian Materials—Functional Biomimetics Inspired by Classical Conditioning. In: Advanced Materials. 2020.

Paunonen, Lassi ; Seifert, David. / Asymptotics and approximation of large systems of ordinary differential equations. In: Systems and Control Letters. 2020 ; Vol. 140.

Juoksukangas, Janne ; Hintikka, Jouko ; Lehtovaara, Arto ; Mäntylä, Antti ; Vaara, Joona ; Frondelius, Tero. / Avoiding the high friction peak in fretting contact. In: Rakenteiden Mekaniikka. 2020 ; Vol. 53, No. 1. pp. 12-19.

Holopainen, Sami. / Käyräviivaiset koordinaatistot kontinuumimekaniikassa. In: Rakenteiden Mekaniikka. 2020 ; Vol. 53, No. 2. pp. 53-66.

Mäntylä, Antti ; Juoksukangas, Janne ; Hintikka, Jouko ; Frondelius, Tero ; Lehtovaara, Arto. / FEM-based wear simulation for fretting contacts. In: Rakenteiden Mekaniikka. 2020 ; Vol. 53, No. 1. pp. 20-27.

Saarimaa, Ville ; Fuertes, Nuria ; Persson, Dan ; Zavalis, Tommy ; Kaleva, Aaretti ; Nikkanen, Juha-Pekka ; Levänen, Erkki ; Heydari, Golrokh. / Assessment of pitting corrosion in bare and passivated (wet scCO2-induced patination and chemical passivation) hot-dip galvanized steel samples with SVET, FTIR, and SEM (EDS). In: Materials and Corrosion. 2020.

Schoeppner, R.L. ; Mohanty, G. ; Polyakov, M.N. ; Petho, L. ; Maeder, X. ; Michler, J. / An exploratory study on strengthening and thermal stability of magnetron sputtered W nanoparticles at the interface of Cu/Ni multilayer films. In: Materials and Design. 2020 ; Vol. 195.

Nommeots-Nomm, A. ; Houaoui, A. ; Pradeepan Packiyanathar, A. ; Chen, X. ; Hokka, M. ; Hill, R. ; Pauthe, E. ; Petit, L. ; Boissière, M. ; Massera, J. / Phosphate/oxyfluorophosphate glass crystallization and its impact on dissolution and cytotoxicity. In: Materials Science and Engineering C. 2020 ; Vol. 117.

Olin, Miska ; Dal Maso, Miikka. / CFD modeling the diffusional losses of nanocluster-sized particles and condensing vapors in 90° bends of circular tubes. In: Journal of Aerosol Science. 2020 ; Vol. 150.

Evans, Donald M. ; Holstad, Theodor S. ; Mosberg, Aleksander B. ; Småbråten, Didrik R. ; Vullum, Per Erik ; Dadlani, Anup L. ; Shapovalov, Konstantin ; Yan, Zewu ; Bourret, Edith ; Gao, David ; Akola, Jaakko ; Torgersen, Jan ; van Helvoort, Antonius T.J. ; Selbach, Sverre M. ; Meier, Dennis. / Conductivity control via minimally invasive anti-Frenkel defects in a functional oxide. In: Nature Materials. 2020.

Vitola, V. ; Lahti, V. ; Bite, I. ; Spustaka, A. ; Millers, D. ; Lastusaari, M. ; Petit, L. ; Smits, K. / Low temperature afterglow from SrAl2O4 : Eu, Dy, B containing glass. In: Scripta Materialia. 2020 ; Vol. 190. pp. 86-90.

Pajarinen, Joni ; Arenz, Oleg ; Peters, Jan ; Neumann, Gerhard. / Probabilistic approach to physical object disentangling. In: IEEE Robotics and Automation Letters. 2020 ; Vol. 5, No. 4. pp. 5510-5517.

Lauri, Mikko ; Pajarinen, Joni ; Peters, Jan ; Frintrop, Simone. / Multi-sensor next-best-view planning as matroid-constrained submodular maximization. In: IEEE Robotics and Automation Letters. 2020 ; Vol. 5, No. 4. pp. 5323-5330.

Pirjola, Liisa ; Kuuluvainen, Heino ; Timonen, Hilkka ; Saarikoski, Sanna ; Teinilä, Kimmo ; Salo, Laura ; Datta, Arindam ; Simonen, Pauli ; Karjalainen, Panu ; Kulmala, Kari ; Rönkkö, Topi. / Potential of renewable fuel to reduce diesel exhaust particle emissions. In: Applied Energy. 2019 ; Vol. 254.

Mäntylä, A. ; Hintikka, J. ; Frondelius, T. ; Vaara, J. ; Lehtovaara, A. ; Juoksukangas, J. / Prediction of contact condition and surface damage by simulating variable friction coefficient and wear. In: Tribology International. 2019.

Hintikka, Jouko ; Mäntylä, Antti ; Vaara, Joona ; Frondelius, Tero ; Juoksukangas, Janne ; Lehtovaara, Arto. / Running-in in fretting, transition from near-stable friction regime to gross sliding. In: Tribology International. 2019 ; Vol. 143.

Mäntyranta, Aino ; Heino, Vuokko ; Isotahdon, Elisa ; Salminen, Turkka ; Huttunen-Saarivirta, Elina. / Tribocorrosion behaviour of two low-alloy steel grades in simulated waste solution. In: Tribology International. 2019 ; Vol. 138. pp. 250-262.

Perttula, Arto ; Nguyen, Nhan ; Collin, Jussi ; Jokinen, Jani-Pekka. / Vehicle type detection and passenger satisfaction analysis using smartphone sensors and digital surveys. In: IET Intelligent Transport Systems. 2019 ; Vol. 13, No. 10. pp. 1499-1506.

Reshef, Orad ; Saad-Bin-Alam, Md ; Huttunen, Mikko J. ; Carlow, Graham ; Sullivan, Brian T. ; Ménard, Jean Michel ; Dolgaleva, Ksenia ; Boyd, Robert W. / Multiresonant High-Q Plasmonic Metasurfaces. In: Nano Letters. 2019 ; Vol. 19, No. 9. pp. 6429-6434.

Ylönen, Markku ; Franc, Jean Pierre ; Miettinen, Juha ; Saarenrinne, Pentti ; Fivel, Marc. / Shedding frequency in cavitation erosion evolution tracking. In: International Journal of Multiphase Flow. 2019 ; Vol. 118. pp. 141-149.

Lehmusto, Juho ; Olin, Miska ; Viljanen, Jan ; Kalliokoski, Joni ; Mylläri, Fanni ; Toivonen, Juha ; Dal Maso, Miikka ; Hupa, Leena. / Detection of gaseous species during KCl-induced high-temperature corrosion by the means of CPFAAS and CI-APi-TOF. In: Materials and Corrosion. 2019.

Kreutzer, Joose ; Viehrig, Marlitt ; Pölönen, Risto Pekka ; Zhao, Feihu ; Ojala, Marisa ; Aalto-Setälä, Katriina ; Kallio, Pasi. / Pneumatic unidirectional cell stretching device for mechanobiological studies of cardiomyocytes. In: BIOMECHANICS AND MODELING IN MECHANOBIOLOGY. 2019.

Szczodra, A. ; Mardoukhi, A. ; Hokka, M. ; Boetti, N. G. ; Petit, L. / Fluorine losses in Er3+oxyfluoride phosphate glasses and glass-ceramics. In: Journal of Alloys and Compounds. 2019 ; Vol. 797. pp. 797-803.

Thomas, K. ; Mohanty, G. ; Wehrs, J. ; Taylor, A. A. ; Pathak, S. ; Casari, D. ; Schwiedrzik, J. ; Mara, N. ; Spolenak, R. ; Michler, J. / Elevated and cryogenic temperature micropillar compression of magnesium–niobium multilayer films. In: Journal of Materials Science. 2019 ; Vol. 54, No. 15. pp. 10884-10901.

Kezilebieke, Shawulienu ; Žitko, Rok ; Dvorak, Marc ; Ojanen, Teemu ; Liljeroth, Peter. / Observation of Coexistence of Yu-Shiba-Rusinov States and Spin-Flip Excitations. In: Nano Letters. 2019 ; Vol. 19, No. 7. pp. 4614-4619.

Juoksukangas, Janne ; Nurmi, Verner ; Hintikka, Jouko ; Vippola, Minnamari ; Lehtovaara, Arto ; Mäntylä, Antti ; Vaara, Joona ; Frondelius, Tero. / Characterization of cracks formed in large flat-on-flat fretting contact. In: International Journal of Fatigue. 2019 ; Vol. 124. pp. 361-370.

Sautter, Jürgen D. ; Xu, Lei ; Miroshnichenko, Andrey E. ; Lysevych, Mykhaylo ; Volkovskaya, Irina ; Smirnova, Daria A. ; Camacho-Morales, Rocio ; Zangeneh Kamali, Khosro ; Karouta, Fouad ; Vora, Kaushal ; Tan, Hoe H. ; Kauranen, Martti ; Staude, Isabelle ; Jagadish, Chennupati ; Neshev, Dragomir N. ; Rahmani, Mohsen. / Tailoring Second-Harmonic Emission from (111)-GaAs Nanoantennas. In: Nano Letters. 2019 ; Vol. 19, No. 6. pp. 3905-3911.

Vuornos, Kaisa ; Ojansivu, Miina ; Koivisto, Janne T. ; Häkkänen, Heikki ; Belay, Birhanu ; Montonen, Toni ; Huhtala, Heini ; Kääriäinen, Minna ; Hupa, Leena ; Kellomäki, Minna ; Hyttinen, Jari ; Ihalainen, Janne A. ; Miettinen, Susanna. / Bioactive glass ions induce efficient osteogenic differentiation of human adipose stem cells encapsulated in gellan gum and collagen type I hydrogels. In: Materials Science and Engineering C. 2019 ; Vol. 99. pp. 905-918.

Sanchez-Guevara, Carmen ; Núñez Peiró, Miguel ; Taylor, Jonathon ; Mavrogianni, Anna ; Neila González, Javier. / Assessing population vulnerability towards summer energy poverty : Case studies of Madrid and London. In: Energy and Buildings. 2019 ; Vol. 190. pp. 132-143.

Itävuo, Pekka ; Hulthén, Erik ; Yahyaei, Moshen ; Vilkko, Matti. / Mass balance control of crushing circuits. In: Minerals Engineering. 2019 ; Vol. 135. pp. 37-47.

Wu, Di ; Coatanea, Eric ; Wang, G. Gary. / Employing Knowledge on Causal Relationship to Assist Multidisciplinary Design Optimization. In: Journal of Mechanical Design, Transactions of the ASME. 2019 ; Vol. 141, No. 4.

Backas, Joni ; Ghabcheloo, Reza. / Nonlinear model predictive energy management of hydrostatic drive transmissions. In: Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering. 2019 ; Vol. 233, No. 3. pp. 335-347.

Nurmi, Verner ; Hintikka, Jouko ; Juoksukangas, Janne ; Honkanen, Mari ; Vippola, Minnamari ; Lehtovaara, Arto ; Mäntylä, Antti ; Vaara, Joona ; Frondelius, Tero. / The formation and characterization of fretting-induced degradation layers using quenched and tempered steel. In: Tribology International. 2019 ; Vol. 131. pp. 258-267.

Hintikka, Jouko ; Mäntylä, Antti ; Vaara, Joona ; Frondelius, Tero ; Lehtovaara, Arto. / Stable and unstable friction in fretting contacts. In: Tribology International. 2019 ; Vol. 131. pp. 73-82.

Liimatainen, Heikki ; van Vliet, Oscar ; Aplyn, David. / The potential of electric trucks – An international commodity-level analysis. In: Applied Energy. 2019 ; Vol. 236. pp. 804-814.

Pekkanen, Timo T. ; Timonen, Raimo S. ; Lendvay, György ; Rissanen, Matti P. ; Eskola, Arkke J. / Kinetics and thermochemistry of the reaction of 3-methylpropargyl radical with molecular oxygen. In: PROCEEDINGS OF THE COMBUSTION INSTITUTE. 2019 ; Vol. 37, No. 1. pp. 299-306.

Claude, Sophie ; Ginestet, Stephane ; Bonhomme, Marion ; Escadeillas, Gilles ; Taylor, Jonathon ; Marincioni, Valentina ; Korolija, Ivan ; Altamirano, Hector. / Evaluating retrofit options in a historical city center : Relevance of bio-based insulation and the need to consider complex urban form in decision-making. In: Energy and Buildings. 2019 ; Vol. 182. pp. 196-204.

Wani, Owies M. ; Verpaalen, Rob ; Zeng, Hao ; Priimagi, Arri ; Schenning, Albert P.H.J. / An Artificial Nocturnal Flower via Humidity-Gated Photoactuation in Liquid Crystal Networks. In: Advanced Materials. 2019 ; Vol. 31, No. 2.

Huttunen-Saarivirta, E. ; Isotahdon, E. ; Metsäjoki, J. ; Salminen, T. ; Ronkainen, H. ; Carpén, L. / Behaviour of leaded tin bronze in simulated seawater in the absence and presence of tribological contact with alumina counterbody : Corrosion, wear and tribocorrosion. In: Tribology International. 2019 ; Vol. 129. pp. 257-271.

Valtonen, Kati ; Ratia, Vilma ; Ramakrishnan, Karthik Ram ; Apostol, Marian ; Terva, Juuso ; Kuokkala, Veli-Tapani. / Impact wear and mechanical behavior of steels at subzero temperatures. In: Tribology International. 2019 ; Vol. 129. pp. 476-493.

Alanen, Jarmo ; Ruiz Morales, Emilio ; Muhammad, Ali ; Saarinen, Hannu ; Minkkinen, Joni. / Remote diagnostics application software for remote handling equipment. In: Fusion Engineering and Design. 2019.

Jaurola, Miikka ; Hedin, Anders ; Tikkanen, Seppo ; Huhtala, Kalevi. / A TOpti simulation for finding fuel saving by optimising propulsion control and power management. In: Journal of Marine Science and Technology (Japan). 2019.

Lemougna, Patrick N. ; Yliniemi, Juho ; Ismailov, Arnold ; Levänen, Erkki ; Tanskanen, Pekka ; Kinnunen, Paivo ; Roning, Juha ; Illikainen, Mirja. / Spodumene tailings for porcelain and structural materials : Effect of temperature (1050–1200 °C) on the sintering and properties. In: Minerals Engineering. 2019.

Linjamaa, A. ; Lehtovaara, A. ; Kallio, M. ; Léger, A. / Running-in effects on friction of journal bearings under slow sliding speeds. In: Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 2019.

Linjama, Matti. / Variable speed digital hydraulic transformer–based servo drive. In: Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering. 2019.

Houaoui, A. ; Lyyra, I. ; Agniel, R. ; Pauthe, E. ; Massera, J. ; Boissière, M. / Dissolution, bioactivity and osteogenic properties of composites based on polymer and silicate or borosilicate bioactive glass. In: Materials Science and Engineering C. 2019 ; Vol. 107.

Gao, Qiang ; Linjama, Matti ; Paloniitty, Miika ; Zhu, Yuchuan. / Investigation on positioning control strategy and switching optimization of an equal coded digital valve system. In: Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering. 2019.

Välikangas, Turo ; Hærvig, Jakob ; Kuuluvainen, Heino ; Dal Maso, Miikka ; Peltonen, Petteri ; Vuorinen, Ville. / Deposition of dry particles on a fin-and-tube heat exchanger by a coupled soft-sphere DEM and CFD. In: International Journal of Heat and Mass Transfer. 2019.

Cheng, Yu Chieh ; Lu, Hao Chuan ; Lee, Xuan ; Zeng, Hao ; Priimagi, Arri. / Kirigami-Based Light-Induced Shape-Morphing and Locomotion. In: Advanced Materials. 2019.

Linjama, Matti. / Variable speed drive with hydraulic boost. In: International Journal of Fluid Power. 2019 ; Vol. 20, No. 1. pp. 99-123.

Czaplicki, Robert ; Kiviniemi, Antti ; Huttunen, Mikko J. ; Zang, Xiaorun ; Stolt, Timo ; Vartiainen, Ismo ; Butet, Jérémy ; Kuittinen, Markku ; Martin, Olivier J.F. ; Kauranen, Martti. / Less Is More : Enhancement of Second-Harmonic Generation from Metasurfaces by Reduced Nanoparticle Density. In: Nano Letters. 2018 ; Vol. 18, No. 12. pp. 7709-7714.

Ottosen, Niels Saabye ; Ristinmaa, Matti ; Kouhia, Reijo. / Enhanced multiaxial fatigue criterion that considers stress gradient effects. In: International Journal of Fatigue. 2018 ; Vol. 116. pp. 128-139.

Niemelä-Anttonen, Henna ; Koivuluoto, Heli ; Tuominen, Mikko ; Teisala, Hannu ; Juuti, Paxton ; Haapanen, Janne ; Harra, Juha ; Stenroos, Christian ; Lahti, Johanna ; Kuusipalo, Jurkka ; Mäkelä, Jyrki M. ; Vuoristo, Petri. / Icephobicity of Slippery Liquid Infused Porous Surfaces under Multiple Freeze–Thaw and Ice Accretion–Detachment Cycles. In: Advanced Materials Interfaces. 2018 ; Vol. 5, No. 20.

Šutka, Andris ; Käämbre, Tanel ; Joost, Urmas ; Kooser, Kuno ; Kook, Mati ; Duarte, Roberto Felix ; Kisand, Vambola ; Maiorov, Mikhael ; Döbelin, Nicola ; Smits, Krisjanis. / Solvothermal synthesis derived Co-Ga codoped ZnO diluted magnetic degenerated semiconductor nanocrystals. In: Journal of Alloys and Compounds. 2018 ; Vol. 763. pp. 164-172.

Sippola, Petteri ; Kolehmainen, Jari ; Ozel, Ali ; Liu, Xiaoyu ; Saarenrinne, Pentti ; Sundaresan, Sankaran. / Experimental and numerical study of wall layer development in a tribocharged fluidized bed. In: Journal of Fluid Mechanics. 2018 ; Vol. 849. pp. 860-884.

Sajna, M. S. ; Perumbilavil, Sreekanth ; Prakashan, V. P. ; Sanu, M. S. ; Joseph, Cyriac ; Biju, P. R. ; Unnikrishnan, N. V. / Enhanced resonant nonlinear absorption and optical limiting in Er3+ ions doped multicomponent tellurite glasses. In: Materials Research Bulletin. 2018 ; Vol. 104. pp. 227-235.

Roldán Del Cerro, P. ; Salminen, T. ; Lastusaari, M. ; Petit, L. / Persistent luminescent borosilicate glasses using direct particles doping method. In: Scripta Materialia. 2018 ; Vol. 151. pp. 38-41.

Nommeots-Nomm, A. ; Boetti, N. G. ; Salminen, T. ; Massera, J. ; Hokka, M. ; Petit, L. / Luminescence of Er3+ doped oxyfluoride phosphate glasses and glass-ceramics. In: Journal of Alloys and Compounds. 2018 ; Vol. 751. pp. 224-230.

Javaheri, Vahid ; Nyyssönen, Tuomo ; Grande, Bjørnar ; Porter, David. / Computational design of a novel medium-carbon, low-alloy steel microalloyed with niobium. In: Journal of Materials Engineering and Performance. 2018 ; Vol. 27, No. 6. pp. 2978-2992.

Oluoti, Kehinde ; Doddapaneni, Tharaka Rama K.C. ; Richards, Tobias. / Investigating the kinetics and biofuel properties of Alstonia congensis and Ceiba pentandra via torrefaction. In: Energy. 2018 ; Vol. 150. pp. 134-141.

Koivusalo, Laura ; Karvinen, Jennika ; Sorsa, Eetu ; Jönkkäri, Ilari ; Väliaho, Jari ; Kallio, Pasi ; Ilmarinen, Tanja ; Miettinen, Susanna ; Skottman, Heli ; Kellomäki, Minna. / Hydrazone crosslinked hyaluronan-based hydrogels for therapeutic delivery of adipose stem cells to treat corneal defects. In: Materials Science and Engineering C. 2018 ; Vol. 85. pp. 68-78.

Mohammed, Wael M. ; Ramis Ferrer, Borja ; Iarovyi, Sergii ; Negri, Elisa ; Fumagalli, Luca ; Lobov, Andrei ; Martinez Lastra, Jose L. / Generic platform for manufacturing execution system functions in knowledge-driven manufacturing systems. In: International Journal of Computer Integrated Manufacturing. 2018 ; pp. 1-13.

Krogerus, Tomi ; Hyvönen, Mika ; Huhtala, Kalevi. / Analysis of common rail pressure signal of dual-fuel large industrial engine for identification of injection duration of pilot diesel injectors. In: Fuel. 2018 ; Vol. 216. pp. 1-9.

Välikangas, Turo ; Karvinen, Reijo. / Conjugated Heat Transfer Simulation of a Fin-and-Tube Heat Exchanger. In: Heat Transfer Engineering. 2018 ; Vol. 39, No. 13-14. pp. 1192-1200.

Zeng, Hao ; Wasylczyk, Piotr ; Wiersma, Diederik S. ; Priimagi, Arri. / Light Robots: Bridging the Gap between Microrobotics and Photomechanics in Soft Materials. In: Advanced Materials. 2018 ; Vol. 30, No. 24.

Välikangas, Turo ; Singh, Shobhana ; Sørensen, Kim ; Condra, Thomas. / Fin-and-tube heat exchanger enhancement with a combined herringbone and vortex generator design. In: International Journal of Heat and Mass Transfer. 2018 ; Vol. 118. pp. 602-616.

Vuorinen, E. ; Heino, V. ; Ojala, N. ; Haiko, O. ; Hedayati, A. / Erosive-abrasive wear behavior of carbide-free bainitic and boron steels compared in simulated field conditions. In: Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 2018 ; Vol. 232, No. 1. pp. 3-13.

Doddapaneni, Tharaka Rama Krishna C. ; Praveenkumar, Ramasamy ; Tolvanen, Henrik ; Rintala, Jukka ; Konttinen, Jukka. / Techno-economic evaluation of integrating torrefaction with anaerobic digestion. In: Applied Energy. 2018 ; Vol. 213. pp. 272-284.

Teisala, Hannu ; Geyer, Florian ; Haapanen, Janne ; Juuti, Paxton ; Mäkelä, Jyrki M. ; Vollmer, Doris ; Butt, Hans Jürgen. / Ultrafast Processing of Hierarchical Nanotexture for a Transparent Superamphiphobic Coating with Extremely Low Roll-Off Angle and High Impalement Pressure. In: Advanced Materials. 2018 ; Vol. 30, No. 14.

Jaurola, Miikka ; Hedin, Anders ; Tikkanen, Seppo ; Huhtala, Kalevi. / TOpti : a flexible framework for optimising energy management for various ship machinery topologies. In: Journal of Marine Science and Technology (Japan). 2018.

Holmberg, Kenneth ; Kivikytö-Reponen, Päivi ; Härkisaari, Pirita ; Valtonen, Kati ; Erdemir, Ali. / Global energy consumption due to friction and wear in the mining industry. In: Tribology International. 2017 ; Vol. 115. pp. 116-139.

Layek, Rama K. ; Uddin, Md Elias ; Kim, Nam Hoon ; Tak Lau, Alan Kin ; Lee, Joong Hee. / Noncovalent functionalization of reduced graphene oxide with pluronic F127 and its nanocomposites with gum arabic. In: Composites Part B : Engineering. 2017 ; Vol. 128. pp. 155-163.

Koivumäki, Janne ; Mattila, Jouni. / Adaptive and nonlinear control of discharge pressure for variable displacement axial piston pumps. In: Journal of Dynamic Systems, Measurement and Control: Transactions of the ASME. 2017 ; Vol. 139, No. 10.

Itävuo, Pekka ; Hulthén, Erik ; Vilkko, Matti. / Feed-hopper level estimation and control in cone crushers. In: Minerals Engineering. 2017 ; Vol. 110. pp. 82-95.

Laurila, M. M. ; Khorramdel, B. ; Dastpak, A. ; Mäntysalo, M. / Statistical analysis of E-jet print parameter effects on Ag-nanoparticle ink droplet size. In: Journal of Micromechanics and Microengineering. 2017 ; Vol. 27, No. 9.

Antin, Kim Niklas ; Pärnänen, Tuomas. / Democratizing composites manufacturing -inexpensive tooling empowers new players. In: SAMPE Journal. 2017 ; Vol. 53, No. 4. pp. 6-10.

Stoykova, Elena ; Berberova, Natalia ; Kim, Youngmin ; Nazarova, Dimana ; Ivanov, Branimir ; Gotchev, Atanas ; Hong, Jisoo ; Kang, Hoonjong. / Dynamic speckle analysis with smoothed intensity-based activity maps. In: Optics and Lasers in Engineering. 2017 ; Vol. 93. pp. 55-65.

Laakkonen, P. ; Quadrat, A. / A fractional representation approach to the robust regulation problem for SISO systems. In: Systems and Control Letters. 2017 ; Vol. 103. pp. 32-37.

Lanz, M. ; Tuokko, R. / Concepts, methods and tools for individualized production. In: PRODUCTION ENGINEERING. 2017 ; Vol. 11, No. 2. pp. 205-212.

Sekki, Tiina ; Airaksinen, Miimu ; Saari, Arto. / Effect of energy measures on the values of energy efficiency indicators in Finnish daycare and school buildings. In: Energy and Buildings. 2017 ; Vol. 139. pp. 124-132.

Mashayekhi, Mohammad ; Winchester, Lee ; Laurila, Mika-Matti ; Mäntysalo, Matti ; Ogier, Simon ; Terés, Lluís ; Carrabina, Jordi. / Chip-by-chip configurable interconnection using digital printing techniques. In: Journal of Micromechanics and Microengineering. 2017 ; Vol. 27, No. 4.

Seidt, J. D. ; Kuokkala, V.-T. ; Smith, J. L. ; Gilat, A. / Synchronous Full-Field Strain and Temperature Measurement in Tensile Tests at Low, Intermediate and High Strain Rates. In: Experimental Mechanics. 2017 ; Vol. 57, No. 2. pp. 219–229.

Isotahdon, Elisa ; Huttunen-Saarivirta, Elina ; Kuokkala, Veli. / Characterization of the microstructure and corrosion performance of Ce-alloyed Nd-Fe-B magnets. In: Journal of Alloys and Compounds. 2017 ; Vol. 692. pp. 190-197.

Hintikka, Jouko ; Lehtovaara, Arto ; Mäntylä, Antti. / Third Particle Ejection Effects on Wear with Quenched and Tempered Steel Fretting Contact. In: TRIBOLOGY TRANSACTIONS. 2017 ; Vol. 60, No. 1. pp. 70-78.

Wang, Xiaoju ; Fagerlund, Susanne ; Massera, Jonathan ; Södergård, Berndt ; Hupa, Leena. / Do properties of bioactive glasses exhibit mixed alkali behavior?. In: Journal of Materials Science. 2017 ; Vol. 52, No. 15. pp. 8986–8997.

Mishra, A. ; Petit, L. ; Pihl, M. ; Andersson, M. ; Salminen, T. ; Rocherullé, J. ; Massera, J. / Thermal, structural and in vitro dissolution of antimicrobial copper-doped and slow resorbable iron-doped phosphate glasses. In: Journal of Materials Science. 2017 ; Vol. 52, No. 15. pp. 8957–8972.

Taddeo, Raffaele ; Prajapati, Sumitra ; Lepistö, Raghida. / Optimizing ammonium adsorption on natural zeolite for wastewaters with high loads of ammonium and solids. In: Journal of Porous Materials. 2017 ; Vol. 24, No. 6. pp. 1545–1554.

Huova, Mikko ; Aalto, Arttu ; Linjama, Matti ; Huhtala, Kalevi ; Lantela, Tapio ; Pietola, Matti. / Digital hydraulic multi-pressure actuator – the concept, simulation study and first experimental results. In: International Journal of Fluid Power. 2017 ; Vol. 18, No. 3. pp. 141-152.

Barreca, Davide ; Carraro, Giorgio ; Gasparotto, Alberto ; Maccato, Chiara ; Altantzis, Thomas ; Sada, Cinzia ; Kaunisto, Kimmo ; Ruoko, Tero-Petri ; Bals, Sara. / Vapor Phase Fabrication of Nanoheterostructures Based on ZnO for Photoelectrochemical Water Splitting. In: Advanced Materials Interfaces. 2017 ; Vol. 4, No. 18.

Lindroos, Matti ; Laukkanen, Anssi ; Cailletaud, Georges ; Kuokkala, Veli-Tapani. / On the effect of deformation twinning and microstructure to strain hardening of high manganese austenitic steel 3D microstructure aggregates at large strains. In: International Journal of Solids and Structures. 2017 ; Vol. 125. pp. 68-76.

Haiko, O. ; Miettunen, I. ; Porter, D. ; Ojala, N. ; Ratia, V. ; Heino, V. ; Kemppainen, A. / Effect of finish rolling and quench stop temperatures on impact-abrasive wear resistance of 0.35 % carbon direct-quenched steel. In: Tribologia. 2017 ; Vol. 35, No. 1-2. pp. 5-21.

Carfora, D. ; Gironimo, G. Di ; Esposito, G. ; Huhtala, K. ; Määttä, T. ; Mäkinen, H. ; Miccichè, G. ; Mozzillo, R. / Multicriteria selection in concept design of a divertor remote maintenance port in the EU DEMO reactor using an AHP participative approach. In: Fusion Engineering and Design. 2016 ; Vol. 112. pp. 324-331.

Juoksukangas, Janne ; Lehtovaara, Arto ; Mäntylä, Antti. / Experimental and numerical investigation of fretting fatigue behavior in bolted joints. In: Tribology International. 2016 ; Vol. 103. pp. 440-448.

Järvinen, Henri ; Isakov, Matti ; Nyyssönen, Tuomo ; Järvenpää, Martti ; Peura, Pasi. / The effect of initial microstructure on the final properties of press hardened 22MnB5 steels. In: Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing. 2016 ; Vol. 676. pp. 109-120.

Sekki, Tiina ; Andelin, Mia ; Airaksinen, Miimu ; Saari, Arto. / Consideration of energy consumption, energy costs, and space occupancy in Finnish daycare centres and school buildings. In: Energy and Buildings. 2016 ; Vol. 129. pp. 199-206.

Juoksukangas, J. ; Lehtovaara, A. ; Mäntylä, A. / A comparison of relative displacement fields between numerical predictions and experimental results in fretting contact. In: Proceedings of the institution of Mechanical Engineers Part J: Journal of Engineering Tribology. 2016 ; Vol. 230, No. 10. pp. 1273-1287.

Lindgren, M. ; Santa-aho, S. ; Vippola, M. / Barkhausen noise response of three different welded duplex stainless steels. In: Insight. 2016 ; Vol. 58, No. 9. pp. 480-486.

Luna, E. ; Wu, M. ; Hanke, M. ; Puustinen, J. ; Guina, M. ; Trampert, A. / Spontaneous formation of three-dimensionally ordered Bi-rich nanostructures within GaAs1-xBix/GaAs quantum wells. In: Nanotechnology. 2016 ; Vol. 27, No. 32.

Rodríguez Ripoll, Manel ; Ojala, Niko ; Katsich, Christian ; Totolin, Vladimir ; Tomastik, Christian ; Hradil, Klaudia. / The role of niobium in improving toughness and corrosion resistance of high speed steel laser hardfacings. In: Materials and Design. 2016 ; Vol. 99. pp. 509-520.

Philippi, P. C. ; Siebert, D. N. ; Hegele, L. A. ; Mattila, K. K. / High-order lattice-Boltzmann. In: Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2016 ; Vol. 38, No. 5. pp. 1401-1419.

Kuzmin, Mikhail ; Laukkanen, Pekka ; Mäkelä, Jaakko ; Yasir, Muhammad ; Tuominen, Marjukka ; Dahl, Johnny ; Punkkinen, Marko P J ; Kokko, Kalevi ; Hedman, Hannu Pekka ; Moon, Jongyun ; Punkkinen, Risto ; Lastusaari, Mika ; Polojärvi, Ville ; Korpijärvi, Ville-Markus ; Guina, Mircea. / Toward the Atomically Abrupt Interfaces of SiOx/Semiconductor Junctions. In: Advanced Materials Interfaces. 2016 ; Vol. 3, No. 11.

Janka, Leo ; Norpoth, Jonas ; Eicher, Stefan ; Rodríguez Ripoll, Manel ; Vuoristo, Petri. / Improving the toughness of thermally sprayed Cr 3C 2-NiCr hardmetal coatings by laser post-treatment. In: Materials and Design. 2016 ; Vol. 98. pp. 135-142.

Hokka, M. ; Black, J. ; Tkalich, D. ; Fourmeau, M. ; Kane, A. ; Hoang, N. H. ; Li, C. C. ; Chen, W. W. ; Kuokkala, V.-T. / Effects of strain rate and confining pressure on the compressive behavior of Kuru granite. In: International Journal of Impact Engineering. 2016 ; Vol. 91. pp. 183-193.

Kanerva, Ulla ; Karhu, Marjaana ; Lagerbom, Juha ; Kronlöf, Anna ; Honkanen, Mari ; Turunen, Erja ; Laitinen, Tarja. / Chemical synthesis of WC-Co from water-soluble precursors : The effect of carbon and cobalt additions to WC synthesis. In: International Journal of Refractory Metals and Hard Materials. 2016 ; Vol. 56. pp. 69-75.

Korkiakoski, Samuli ; Brøndsted, Povl ; Sarlin, Essi ; Saarela, Olli. / Influence of specimen type and reinforcement on measured tension-tension fatigue life of unidirectional GFRP laminates. In: International Journal of Fatigue. 2016 ; Vol. 85. pp. 114-129.

Andersson, P. ; Kilpi, L. ; Holmberg, K. ; Vaajoki, A. ; Oksanen, V. / Static friction measurements on steel against uncoated and coated cast iron. In: Tribologia. 2016 ; Vol. 34, No. 1-2. pp. 5-40.

Hintikka, Jouko ; Lehtovaara, Arto ; Mäntylä, Antti. / Normal displacements in non-Coulomb friction conditions during fretting. In: Tribology International. 2016 ; Vol. 94. pp. 633-639.

Bolelli, Giovanni ; Milanti, Andrea ; Lusvarghi, Luca ; Trombi, Lorenzo ; Koivuluoto, Heli ; Vuoristo, Petri. / Wear and impact behaviour of High Velocity Air-Fuel sprayed Fe-Cr-Ni-B-C alloy coatings. In: Tribology International. 2016 ; Vol. 95. pp. 372-390.

Paris, Henri ; Mokhtarian, Hossein ; Coatanéa, Eric ; Museau, Matthieu ; Ituarte, Inigo Flores. / Comparative environmental impacts of additive and subtractive manufacturing technologies. In: CIRP Annals: Manufacturing Technology. 2016 ; Vol. 65, No. 1. pp. 29-32.

Hilliaho, Kimmo ; Köliö, Arto ; Pakkala, Toni ; Lahdensivu, Jukka ; Vinha, Juha. / Effects of added glazing on Balcony indoor temperatures : Field measurements. In: Energy and Buildings. 2016 ; Vol. 128. pp. 458-472.

Ihalainen, Teemu O. ; Aires, Lina ; Herzog, Florian A. ; Schwartlander, Ruth ; Moeller, Jens ; Vogel, Viola. / Differential basal-to-apical accessibility of lamin A/C epitopes in the nuclear lamina regulated by changes in cytoskeletal tension. In: Nature Materials. 2015 ; Vol. 14, No. 12. pp. 1252-1261.

Fedorik, Filip ; Malaska, Mikko ; Hannila, Raimo ; Haapala, Antti. / Improving the thermal performance of concrete-sandwich envelopes in relation to the moisture behaviour of building structures in boreal conditions. In: Energy and Buildings. 2015 ; Vol. 107. pp. 226-233.

Bourhis, Kevin ; Massera, Jonathan ; Petit, Laeticia ; Koponen, Joona ; Fargues, Alexandre ; Cardinal, Thierry ; Hupa, Leena ; Hupa, Mikko ; Dussauze, Marc ; Rodriguez, Vincent ; Ferraris, Monica. / Erbium-doped borosilicate glasses containing various amounts of P2O5 and Al2O3 : Influence of the silica content on the structure and thermal, physical, optical and luminescence properties. In: Materials Research Bulletin. 2015 ; Vol. 70. pp. 47-54.

Sekki, Tiina ; Airaksinen, Miimu ; Saari, Arto. / Impact of building usage and occupancy on energy consumption in Finnish daycare and school buildings. In: Energy and Buildings. 2015 ; Vol. 105. pp. 247-257.

Gashti, E. Hassani Nezhad ; Malaska, M. ; Kujala, K. / Analysis of thermo-active pile structures and their performance under groundwater flow conditions. In: Energy and Buildings. 2015 ; Vol. 105. pp. 1-8.

Syrjärinne, Paula ; Nummenmaa, Jyrki ; Thanisch, Peter ; Kerminen, Riitta ; Hakulinen, Esa. / Analysing traffic fluency from bus data. In: IET Intelligent Transport Systems. 2015 ; Vol. 9, No. 6. pp. 566-572.

Haaparanta, Anne-Marie ; Uppstu, Peter ; Hannula, Markus ; Ellä, Ville ; Rosling, Ari ; Kellomäki, Minna. / Improved dimensional stability with bioactive glass fibre skeleton in poly(lactide-co-glycolide) porous scaffolds for tissue engineering. In: Materials Science and Engineering C: Materials for Biological Applications. 2015 ; Vol. 56. pp. 457-466.

Hakkarainen, T. V. ; Schramm, A. ; Mäkelä, J. ; Laukkanen, P. ; Guina, M. / Lithography-free oxide patterns as templates for self-catalyzed growth of highly uniform GaAs nanowires on Si(111). In: Nanotechnology. 2015 ; Vol. 26, No. 27.

Carfora, D. ; Di Gironimo, G. ; Järvenpää, J. ; Huhtala, K. ; Määttä, T. ; Siuko, M. / Divertor remote handling for DEMO : Concept design and preliminary FMECA studies. In: Fusion Engineering and Design. 2015 ; Vol. 98-99. pp. 1437-1441.

Hintikka, Jouko ; Lehtovaara, Arto ; Mäntylä, Antti. / Fretting-induced friction and wear in large flat-on-flat contact with quenched and tempered steel. In: Tribology International. 2015 ; Vol. 92. pp. 191-202.

Wu, Haosheng ; Sariola, Veikko ; Zhu, Congcong ; Zhao, Jingsi ; Sitti, Metin ; Bettinger, Christopher J. / Transfer printing of metallic microstructures on adhesion-promoting hydrogel substrates. In: Advanced Materials. 2015 ; Vol. 27, No. 22. pp. 3398-3404.

Le, Taoran ; Lin, Ziyin ; Wong, C. P. ; Tentzeris, M. M. / Smart Skins : Could they be the ultimate sensing tool? Today\uFFFDs industry and personal medical care both strongly demand accurate, reliable, robust, lo. In: IEEE Nanotechnology Magazine. 2015 ; Vol. 9, No. 2. pp. 4-10.

Isotahdon, E. ; Huttunen-Saarivirta, E. ; Heinonen, S. ; Kuokkala, V. T. ; Paju, M. / Corrosion mechanisms of sintered Nd-Fe-B magnets in the presence of water as vapour, pressurised vapour and liquid. In: Journal of Alloys and Compounds. 2015 ; Vol. 626. pp. 349-359.

Bautista, Godofredo ; Mäkitalo, Jouni ; Chen, Ya ; Dhaka, Veer ; Grasso, Marco ; Karvonen, Lasse ; Jiang, Hua ; Huttunen, Mikko J. ; Huhtio, Teppo ; Lipsanen, Harri ; Kauranen, Martti. / Second-harmonic generation imaging of semiconductor nanowires with focused vector beams. In: Nano Letters. 2015 ; Vol. 15, No. 3. pp. 1564-1569.

Ratia, Vilma ; Rojacz, Harald ; Terva, Juuso ; Valtonen, Kati ; Badisch, Ewald ; Kuokkala, Veli Tapani. / Effect of Multiple Impacts on the Deformation of Wear-Resistant Steels. In: Tribology Letters. 2015 ; Vol. 57, No. 2.

Czaplicki, R. ; Mäkitalo, J. ; Siikanen, R. ; Husu, H. ; Lehtolahti, J. ; Kuittinen, M. ; Kauranen, M. / Second-Harmonic Generation from Metal Nanoparticles : Resonance Enhancement versus Particle Geometry. In: Nano Letters. 2015 ; Vol. 15, No. 1. pp. 530-534.

Mettänen, Marja ; Hirn, Ulrich. / A comparison of five optical surface topography measurement methods. In: TAPPI Journal. 2015 ; Vol. 14, No. 1. pp. 27-38.

Sekki, Tiina ; Airaksinen, Miimu ; Saari, Arto. / Measured energy consumption of educational buildings in a Finnish city. In: Energy and Buildings. 2015 ; Vol. 87. pp. 105-115.

Björling, M. ; Miettinen, J. ; Marklund, P. ; Lehtovaara, A. ; Larsson, R. / The correlation between gear contact friction and ball on disc friction measurements. In: Tribology International. 2015 ; Vol. 83. pp. 114-119.

Lindroos, Matti ; Apostol, Marian ; Kuokkala, Veli Tapani ; Laukkanen, Anssi ; Valtonen, Kati ; Holmberg, Kenneth ; Oja, Olli. / Experimental study on the behavior of wear resistant steels under high velocity single particle impacts. In: International Journal of Impact Engineering. 2015 ; Vol. 78. pp. 114-127.

Lindroos, Matti ; Apostol, Marian ; Heino, Vuokko ; Valtonen, Kati ; Laukkanen, Anssi ; Holmberg, Kenneth ; Kuokkala, Veli Tapani. / The deformation, strain hardening, and wear behavior of chromium-alloyed hadfield steel in abrasive and impact conditions. In: Tribology Letters. 2015 ; Vol. 57, No. 3.

Barreca, Davide ; Carraro, Giorgio ; Gasparotto, Alberto ; Maccato, Chiara ; Warwick, Michael E A ; Kaunisto, Kimmo ; Sada, Cinzia ; Turner, Stuart ; Gönüllü, Yakup ; Ruoko, Tero-Petri ; Borgese, Laura ; Bontempi, Elza ; Van Tendeloo, Gustaaf ; Lemmetyinen, Helge ; Mathur, Sanjay. / Fe2O3-TiO2 Nano-heterostructure Photoanodes for Highly Efficient Solar Water Oxidation. In: Advanced Materials Interfaces. 2015 ; Vol. 2, No. 17.

Palazzo, Gerardo ; De Tullio, Donato ; Magliulo, Maria ; Mallardi, Antonia ; Intranuovo, Francesca ; Mulla, Mohammad Yusuf ; Favia, Pietro ; Vikholm-Lundin, Inger ; Torsi, Luisa. / Detection beyond Debye's length with an electrolyte-gated organic field-effect transistor. In: Advanced Materials. 2015 ; Vol. 27, No. 5. pp. 911-916.

Sariola, Veikko ; Sitti, Metin. / Mechanically Switchable Elastomeric Microfibrillar Adhesive Surfaces for Transfer Printing. In: Advanced Materials Interfaces. 2014 ; Vol. 1, No. 4.

Borah, Dipu ; Rasappa, Sozaraj ; Senthamaraikannan, Ramsankar ; Holmes, Justin D. ; Morris, Michael A. / Graphoepitaxial Directed Self-Assembly of Polystyrene-Block-Polydimethylsiloxane Block Copolymer on Substrates Functionalized with Hexamethyldisilazane to Fabricate Nanoscale Silicon Patterns. In: Advanced Materials Interfaces. 2014 ; Vol. 1, No. 3.

Tzounis, Lazaros ; Debnath, Subhas ; Rooj, Sandip ; Fischer, Dieter ; Mäder, Edith ; Das, Amit ; Stamm, Manfred ; Heinrich, Gert. / High performance natural rubber composites with a hierarchical reinforcement structure of carbon nanotube modified natural fibers. In: Materials and Design. 2014 ; Vol. 58. pp. 1-11.

Gordon, Thomas R. ; Paik, Taejong ; Klein, Dahlia R. ; Naik, Gururaj V. ; Caglayan, Humeyra ; Boltasseva, Alexandra ; Murray, Christopher B. / Shape-dependent plasmonic response and directed self-assembly in a new semiconductor building block, indium-doped cadmium oxide (ICO). In: Nano Letters. 2013 ; Vol. 13, No. 6. pp. 2857-2863.

Colace, L. ; Santoni, F. ; Assanto, G. / A near-infrared optoelectronic approach to detection of road conditions. In: Optics and Lasers in Engineering. 2013 ; Vol. 51, No. 5. pp. 633-636.

Liimatainen, Ville ; Sariola, Veikko ; Zhou, Quan. / Controlling liquid spreading using microfabricated undercut edges. In: Advanced Materials. 2013 ; Vol. 25, No. 16. pp. 2275-2278.

Magliulo, Maria ; Mallardi, Antonia ; Mulla, Mohammad Yusuf ; Cotrone, Serafina ; Pistillo, Bianca Rita ; Favia, Pietro ; Vikholm-Lundin, Inger ; Palazzo, Gerardo ; Torsi, Luisa. / Electrolyte-gated organic field-effect transistor sensors based on supported biotinylated phospholipid bilayer. In: Advanced Materials. 2013 ; Vol. 25, No. 14. pp. 2090-2094.

Cochrane, Cédric ; Mordon, Serge R. ; Lesage, Jean Claude ; Koncar, Vladan. / New design of textile light diffusers for photodynamic therapy. In: Materials Science and Engineering C: Materials for Biological Applications. 2013 ; Vol. 33, No. 3. pp. 1170-1175.

Rasappa, Sozaraj ; Borah, Dipu ; Faulkner, Colm C. ; Lutz, Tarek ; Shaw, Matthew T. ; Holmes, Justin D. ; Morris, Michael A. / Fabrication of a sub-10 nm silicon nanowire based ethanol sensor using block copolymer lithography. In: Nanotechnology. 2013 ; Vol. 24, No. 6.

Fafarman, Aaron T. ; Hong, Sung Hoon ; Caglayan, Humeyra ; Ye, Xingchen ; Diroll, Benjamin T. ; Paik, Taejong ; Engheta, Nader ; Murray, Christopher B. ; Kagan, Cherie R. / Chemically tailored dielectric-to-metal transition for the design of metamaterials from nanoimprinted colloidal nanocrystals. In: Nano Letters. 2013 ; Vol. 13, No. 2. pp. 350-357.

Debnath, Subhas Ch ; Das, Amit ; Basu, Debdipta ; Heinrich, G. / Naturally occurring amino acids : A suitable substitute of N-N/-di-phenyl guanidine (DPG) in silica tyre formulation?. In: KGK: KAUTSCHUK GUMMI KUNSTSTOFFE. 2013 ; Vol. 66, No. 1-2. pp. 25-31.

Wang, Heyun ; Feng, Yakai ; Fang, Zichen ; Yuan, Wenjie ; Khan, Musammir. / Co-electrospun blends of PU and PEG as potential biocompatible scaffolds for small-diameter vascular tissue engineering. In: Materials Science and Engineering C: Materials for Biological Applications. 2012 ; Vol. 32, No. 8. pp. 2306-2315.

Kouhia, Reijo ; Tůma, Miroslav ; Mäkinen, Jari ; Fedoroff, Alexis ; Marjamäki, Heikki. / Implementation of a direct procedure for critical point computations using preconditioned iterative solvers. In: Computers & Structures. 2012 ; Vol. 108-109. pp. 110-117.

Subramaniam, Kalaivani ; Das, Amit ; Heinrich, Gert. / Highly conducting polychloroprene composites based on multi-walled carbon nanotubes and 1-butyl 3-methyl imidazolium bis(trifluoromethylsulphonyl)imide. In: KGK: KAUTSCHUK GUMMI KUNSTSTOFFE. 2012 ; Vol. 65, No. 7-8. pp. 44-46.

Ahmed, Rumman ; Priimagi, Arri ; Faul, Charl F J ; Manners, Ian. / Redox-active, organometallic surface-relief gratings from azobenzene-containing polyferrocenylsilane block copolymers. In: Advanced Materials. 2012 ; Vol. 24, No. 7. pp. 926-931.

Malas, Asish ; Das, Chapal Kumar ; Das, Amit ; Heinrich, Gert. / Development of expanded graphite filled natural rubber vulcanizates in presence and absence of carbon black : Mechanical, thermal and morphological properties. In: Materials and Design. 2012 ; Vol. 39. pp. 410-417.

Kurnitski, Jarek ; Saari, Arto ; Kalamees, Targo ; Vuolle, Mika ; Niemelä, Jouko ; Tark, Teet. / Cost optimal and nearly zero (nZEB) energy performance calculations for residential buildings with REHVA definition for nZEB national implementation. In: Energy and Buildings. 2011 ; Vol. 43, No. 11. pp. 3279-3288.

Kravchenko, Aleksandr ; Shevchenko, Andriy ; Ovchinnikov, Victor ; Priimagi, Arri ; Kaivola, Matti. / Optical interference lithography using azobenzene-functionalized polymers for micro-and nanopatterning of silicon. In: Advanced Materials. 2011 ; Vol. 23, No. 36. pp. 4174-4177.

Chang, Bo ; Routa, Iiris ; Sariola, Veikko ; Zhou, Quan. / Self-alignment of RFID dies on four-pad patterns with water droplet for sparse self-assembly. In: Journal of Micromechanics and Microengineering. 2011 ; Vol. 21, No. 9.

Linko, Veikko ; Leppiniemi, Jenni ; Paasonen, Seppo Tapio ; Hytönen, Vesa P. ; Jussi Toppari, J. / Defined-size DNA triple crossover construct for molecular electronics : Modification, positioning and conductance properties. In: Nanotechnology. 2011 ; Vol. 22, No. 27.

Tuurna, S. ; Varis, T. ; Penttilä, K. ; Ruusuvuori, K. ; Holmström, S. ; Yli-Olli, S. / Optimised selection of new protective coatings for biofuel boiler applications. In: Materials and Corrosion-Werkstoffe und Korrosion. 2011 ; Vol. 62, No. 7. pp. 642-649.

Lisjak, Darja ; Lintunen, Pertti ; Hujanen, Arto ; Varis, Tommi ; Bolelli, Giovanni ; Lusvarghi, Luca ; Jagodič, Marko ; Drofenik, Miha. / Hexaferrite/polyethylene Composite coatings prepared with flame spraying. In: Materials Letters. 2011 ; Vol. 65, No. 3. pp. 534-536.

Chang, Bo ; Sariola, Veikko ; Jääskeläinen, Mirva ; Zhou, Quan. / Self-alignment in the stacking of microchips with mist-induced water droplets. In: Journal of Micromechanics and Microengineering. 2011 ; Vol. 21, No. 1.

Lorimer, G. W. ; Dicken, R. ; Peura, P. ; Pilkington, R. ; Younes, C. M. ; Allen, G. C. ; Holt, M. J. / The effect of phosphorous and arsenic on the fracture behaviour of a 2,25% Cr-1% Mo Steel. In: Materials Science Forum. 1996 ; Vol. 207-209, No. PART 2. pp. 645-648.