Halonen, H. T., Ihalainen, T. O., Hyväri, L., Miettinen, S., & Hyttinen, J. A. K. (2020). Cell adhesion and culture medium dependent changes in the high frequency mechanical vibration induced proliferation, osteogenesis, and intracellular organization of human adipose stem cells. Journal of the Mechanical Behavior of Biomedical Materials, 101, [103419]. https://doi.org/10.1016/j.jmbbm.2019.103419

Haiko, O., Valtonen, K., Kaijalainen, A., Uusikallio, S., Hannula, J., Liimatainen, T., & Kömi, J. (2019). Effect of tempering on the impact-abrasive and abrasive wear resistance of ultra-high strength steels. Wear, 440-441. https://doi.org/10.1016/j.wear.2019.203098

Dongho-Nguimdo, G. M., Igumbor, E., Zambou, S., & Joubert, D. P. (2019). First principles prediction of the solar cell efficiency of chalcopyrite materials  AgMX2(M=In, Al; X=S, Se, Te). Computational Condensed Matter, 21, [e00391]. https://doi.org/10.1016/j.cocom.2019.e00391

Iyer, A. H. S., Mohanty, G., Stiller, K., Michler, J., & Colliander, M. H. (2019). Microscale fracture of chromia scales. Materialia, 8, [100465]. https://doi.org/10.1016/j.mtla.2019.100465

Lorite, G. S., Ylä-Outinen, L., Janssen, L., Pitkänen, O., Joki, T., Koivisto, J. T., ... Kordas, K. (2019). Carbon nanotube micropillars trigger guided growth of complex human neural stem cells networks. Nano Research, 12(11), 2894-2899. https://doi.org/10.1007/s12274-019-2533-2

Kanerva, M., Besharat, Z., Pärnänen, T., Jokinen, J., Honkanen, M., Sarlin, E., ... Schlenzka, D. (2019). Miniature CoCr laser welds under cyclic shear: Fatigue evolution and crack growth. Journal of the Mechanical Behavior of Biomedical Materials, 99, 93-103. https://doi.org/10.1016/j.jmbbm.2019.07.004

Lemougna, P. N., Yliniemi, J., Ismailov, A., Levänen, E., Tanskanen, P., Kinnunen, P., ... Illikainen, M. (2019). Recycling lithium mine tailings in the production of low temperature (700–900 °C) ceramics: Effect of ladle slag and sodium compounds on the processing and final properties. Construction and building materials, 221, 332-344. https://doi.org/10.1016/j.conbuildmat.2019.06.078

Ismailov, A., Merilaita, N., Solismaa, S., Karhu, M., & Levänen, E. (2020). Utilizing mixed-mineralogy ferroan magnesite tailings as the source of magnesium oxide in magnesium potassium phosphate cement. Construction and building materials, 231, [117098]. https://doi.org/10.1016/j.conbuildmat.2019.117098

Rissanen, I., & Laurson, L. (2019). Bursty magnetic friction between polycrystalline thin films with domain walls. Physical Review B, 100(14), [144408]. https://doi.org/10.1103/PhysRevB.100.144408

Vetter, C., Steinkopf, R., Bergner, K., Ornigotti, M., Nolte, S., Gross, H., & Szameit, A. (2019). Realization of Free-Space Long-Distance Self-Healing Bessel Beams. Laser and Photonics Reviews, 13(10), [1900103]. https://doi.org/10.1002/lpor.201900103

Mäntyranta, A., Heino, V., Isotahdon, E., Salminen, T., & Huttunen-Saarivirta, E. (2019). Tribocorrosion behaviour of two low-alloy steel grades in simulated waste solution. Tribology International, 138, 250-262. https://doi.org/10.1016/j.triboint.2019.05.032

Skaugen, A., Murray, P., & Laurson, L. (2019). Analytical computation of the demagnetizing energy of thin-film domain walls. Physical Review B, 100(9), [094440]. https://doi.org/10.1103/PhysRevB.100.094440

Klauck, F., Teuber, L., Ornigotti, M., Heinrich, M., Scheel, S., & Szameit, A. (2019). Observation of PT-symmetric quantum interference. Nature Photonics. https://doi.org/10.1038/s41566-019-0517-0

Scapin, M., Verleysen, P., Hokka, M., & Bahlouli, N. (Eds.) (2019). Special Issue: Temperature Dependence of Material Behaviour at High Strain-Rate. Journal of Dynamic Behavior of Materials, 5(3).

Reshef, O., Saad-Bin-Alam, M., Huttunen, M. J., Carlow, G., Sullivan, B. T., Ménard, J. M., ... Boyd, R. W. (2019). Multiresonant High-Q Plasmonic Metasurfaces. Nano Letters, 19(9), 6429-6434. https://doi.org/10.1021/acs.nanolett.9b02638

Roshanbinfar, K., Mohammadi, Z., Sheikh-Mahdi Mesgar, A., Dehghan, M. M., Oommen, O. P., Hilborn, J., & Engel, F. B. (2019). Carbon nanotube doped pericardial matrix derived electroconductive biohybrid hydrogel for cardiac tissue engineering. Biomaterials Science, 7(9), 3906-3917. https://doi.org/10.1039/c9bm00434c

Faqhiri, H., Hannula, M., Kellomäki, M., Calejo, M. T., & Massera, J. (2019). Effect of melt-derived bioactive glass particles on the properties of chitosan scaffolds. JOURNAL OF FUNCTIONAL BIOMATERIALS, 10(3), [38]. https://doi.org/10.3390/jfb10030038

Bączkiewicz, J., Pajunen, S., Malaska, M., & Heinisuo, M. (2019). Parametric study on temperature distribution of square hollow section joints. Journal of Constructional Steel Research, 160, 490-498. https://doi.org/10.1016/j.jcsr.2019.05.049

Calejo, M. T., Haapala, A., Skottman, H., & Kellomäki, M. (2019). Porous polybutylene succinate films enabling adhesion of human embryonic stem cell-derived retinal pigment epithelial cells (hESC-RPE). European Polymer Journal, 118, 78-87. https://doi.org/10.1016/j.eurpolymj.2019.05.041

Kanerva, M., Puolakka, A., Takala, T. M., Elert, A. M., Mylläri, V., Jönkkäri, I., ... Vuorinen, J. (2019). Antibacterial polymer fibres by rosin compounding and melt-spinning. Materials Today Communications, 20, [100527]. https://doi.org/10.1016/j.mtcomm.2019.05.003

Vuornos, K., Huhtala, H., Kääriäinen, M., Kuismanen, K., Hupa, L., Kellomäki, M., & Miettinen, S. (2019). Bioactive glass ions for in vitro osteogenesis and microvascularization in gellan gum-collagen hydrogels. Journal of Biomedical Materials Research - Part B Applied Biomaterials. https://doi.org/10.1002/jbm.b.34482

Lehmusto, J., Olin, M., Viljanen, J., Kalliokoski, J., Mylläri, F., Toivonen, J., ... Hupa, L. (2019). Detection of gaseous species during KCl-induced high-temperature corrosion by the means of CPFAAS and CI-APi-TOF. Materials and Corrosion. https://doi.org/10.1002/maco.201910964

Wang, S., Nawale, G. N., Oommen, O. P., Hilborn, J., & Varghese, O. P. (2019). Influence of ions to modulate hydrazone and oxime reaction kinetics to obtain dynamically cross-linked hyaluronic acid hydrogels. Polymer Chemistry, 10(31), 4322-4327. https://doi.org/10.1039/c9py00862d

Kiilakoski, J., Langlade, C., Koivuluoto, H., & Vuoristo, P. (2019). Characterizing the micro-impact fatigue behavior of APS and HVOF-sprayed ceramic coatings. Surface and Coatings Technology, 371, 245-254. https://doi.org/10.1016/j.surfcoat.2018.10.097

Thomas, K., Mohanty, G., Wehrs, J., Taylor, A. A., Pathak, S., Casari, D., ... Michler, J. (2019). Elevated and cryogenic temperature micropillar compression of magnesium–niobium multilayer films. Journal of Materials Science, 54(15), 10884-10901. https://doi.org/10.1007/s10853-019-03422-x

Szczodra, A., Mardoukhi, A., Hokka, M., Boetti, N. G., & Petit, L. (2019). Fluorine losses in Er3+oxyfluoride phosphate glasses and glass-ceramics. Journal of Alloys and Compounds, 797, 797-803. https://doi.org/10.1016/j.jallcom.2019.05.151

Fantozzi, D., Matikainen, V., Uusitalo, M., Koivuluoto, H., & Vuoristo, P. (2019). Chlorine induced high-temperature corrosion mechanisms in HVOF and HVAF sprayed Cr3C2-based hardmetal coatings. Corrosion Science, [108166]. https://doi.org/10.1016/j.corsci.2019.108166

Rissanen, I., & Laurson, L. (2019). Magnetic non-contact friction from domain wall dynamics actuated by oscillatory mechanical motion. Journal of Physics D: Applied Physics, 52(44), [445002]. https://doi.org/10.1088/1361-6463/ab351f

Pitkänen, S., Paakinaho, K., Pihlman, H., Ahola, N., Hannula, M., Asikainen, S., ... Miettinen, S. (2019). Characterisation and in vitro and in vivo evaluation of supercritical-CO2-foamed β-TCP/PLCL composites for bone applications. European cells & materials, 38, 35-50. https://doi.org/10.22203/eCM.v038a04

Hakkarainen, T., Rizzo Piton, M., Fiordaliso, E. M., Leshchenko, E. D., Koelling, S., Bettini, J., ... Guina, M. (2019). Te incorporation and activation as n-type dopant in self-catalyzed GaAs nanowires. Physical Review Materials, 3(8), [086001]. https://doi.org/10.1103/PhysRevMaterials.3.086001

Ruuskanen, J., Stenvall, A., Lahtinen, V., Nugteren, J. V., Kirby, G., & Murtomäki, J. (2019). Modelling thermodynamics in a high erature superconducting dipole magnet: An inverse problem based approach. Superconductor Science and Technology, 32(9), [094007]. https://doi.org/10.1088/1361-6668/ab2bc9

Murtomäki, J. S., Van Nugteren, J., Stenvall, A., Kirby, G., & Rossi, L. (2019). 3-D mechanical modeling of 20 T HTS clover leaf end coils - Good practices and lessons learned. IEEE Transactions on Applied Superconductivity, 29(5), [8642381]. https://doi.org/10.1109/TASC.2019.2899317

Nechay, K., Kahle, H., Penttinen, J-P., Rajala, P., Tukiainen, A., Ranta, S., & Guina, M. (2019). AlGaAs/AlGaInP VECSELs with Direct Emission at 740-770 nm. IEEE Photonics Technology Letters, 31(15), 1245-1248. https://doi.org/10.1109/LPT.2019.2924289

Lorin, C., Fleiter, J., Salmi, T., & Schoerling, D. (2019). Exploration of Two Layer Nb3Sn Designs of the Future Circular Collider Main Quadrupoles. IEEE Transactions on Applied Superconductivity, 29(5), [4001005]. https://doi.org/10.1109/TASC.2019.2892814

Hannula, M., Ali-Löytty, H., Lahtonen, K., Saari, J., Tukiainen, A., & Valden, M. (2019). Highly efficient charge separation in model Z-scheme TiO2/TiSi2/Si photoanode by micropatterned titanium silicide interlayer. Acta Materialia, 174, 237-245. https://doi.org/10.1016/j.actamat.2019.05.032

Matikainen, V., Rubio Peregrina, S., Ojala, N., Koivuluoto, H., Schubert, J., Houdková, & Vuoristo, P. (2019). Erosion wear performance of WC-10Co4Cr and Cr3C2-25NiCr coatings sprayed with high-velocity thermal spray processes. Surface and Coatings Technology, 370, 196-212. https://doi.org/10.1016/j.surfcoat.2019.04.067

Wu, H., Ryczkowski, P., Friberg, A. T., Dudley, J. M., & Genty, G. (2019). Temporal ghost imaging using wavelength conversion and two-color detection. Optica, 6(7), 902-906. https://doi.org/10.1364/OPTICA.6.000902

Wang, X., Molino, B. Z., Pitkänen, S., Ojansivu, M., Xu, C., Hannula, M., ... Wallace, G. (2019). 3D Scaffolds of Polycaprolactone/Copper-Doped Bioactive Glass: Architecture Engineering with Additive Manufacturing and Cellular Assessments in a Coculture of Bone Marrow Stem Cells and Endothelial Cells. ACS Biomaterials Science and Engineering, 5(9), 4496-4510. https://doi.org/10.1021/acsbiomaterials.9b00105

Kezilebieke, S., Žitko, R., Dvorak, M., Ojanen, T., & Liljeroth, P. (2019). Observation of Coexistence of Yu-Shiba-Rusinov States and Spin-Flip Excitations. Nano Letters, 19(7), 4614-4619. https://doi.org/10.1021/acs.nanolett.9b01583

Bhalerao, S. R., Lupo, D., Zangiabadi, A., Kymissis, I., Leppäniemi, J., Alastalo, A., & Berger, P. R. (2019). 0.6V threshold voltage thin film transistors with solution processable indium oxide (In2O3) Channel and Anodized High-κ Al2O3 Dielectric. IEEE Electron Device Letters, 40(7), 1112-1115. https://doi.org/10.1109/LED.2019.2918492

the FCC Collaboration, Abada, A., Abbrescia, M., AbdusSalam, S. S., Abdyukhanov, I., Abelleira Fernandez, J., ... Stenvall, A. (2019). FCC-hh: The Hadron Collider: Future Circular Collider Conceptual Design Report Volume 3. European Physical Journal: Special Topics, 228(4), 755-1107. https://doi.org/10.1140/epjst/e2019-900087-0

Huttunen, M. J., Hristu, R., Dumitru, A., Costache, M., & Stanciu, S. G. (2019). Investigating human skin using deep learning enhanced multiphoton microscopy. In 21st International Conference on Transparent Optical Networks, ICTON 2019 (International Conference on Transparent Optical Networks). IEEE. https://doi.org/10.1109/ICTON.2019.8840265

Blanc, W., Vermillac, M., Petit, L., Lukowiak, A., Lu, Z., Mady, F., ... Ferrari, M. (2019). Nanoparticles in optical waveguides: A toolbox to promote lasers, amplifiers and sensors. In 21st International Conference on Transparent Optical Networks, ICTON 2019 (International Conference on Transparent Optical Networks). IEEE. https://doi.org/10.1109/ICTON.2019.8840208

Aryal, U., Ojha, N., Trautvetter, T., Lastusaari, M., Ueda, J., Mueller, R., ... Petit, L. (2019). Persistent luminescent glasses prepared using the direct doping method. In 21st International Conference on Transparent Optical Networks, ICTON 2019 (International Conference on Transparent Optical Networks). IEEE. https://doi.org/10.1109/ICTON.2019.8840287

Dudley, J. M., Ryczkowski, P., Närhi, M., Billet, C., Merolla, J. M., Lapre, C., ... Genty, G. (2019). Real-time measurements of ultrafast instabilities in nonlinear fiber optics: Recent advances. In 21st International Conference on Transparent Optical Networks, ICTON 2019 (International Conference on Transparent Optical Networks). IEEE. https://doi.org/10.1109/ICTON.2019.8840476

Huttunen, M. J., Stolt, T., Reshef, O., Kiviniemi, A., Czaplicki, R., Zang, X., ... Kauranen, M. (2019). Towards efficient nonlinear plasmonic metasurfaces. In 21st International Conference on Transparent Optical Networks, ICTON 2019 (International Conference on Transparent Optical Networks). IEEE. https://doi.org/10.1109/ICTON.2019.8840277

Juoksukangas, J., Nurmi, V., Hintikka, J., Vippola, M., Lehtovaara, A., Mäntylä, A., ... Frondelius, T. (2019). Characterization of cracks formed in large flat-on-flat fretting contact. International Journal of Fatigue, 124, 361-370. https://doi.org/10.1016/j.ijfatigue.2019.03.004

Jackson, T., Shenkin, A., Moore, J., Bunce, A., van Emmerik, T., Kane, B., ... Malhi, Y. (2019). An architectural understanding of natural sway frequencies in trees. Journal of the Royal Society. Interface, 16(155). https://doi.org/10.1098/rsif.2019.0116

Vapaavuori, J., Grosrenaud, J., Siiskonen, A., Priimägi, A., Pellerin, C., & Bazuin, C. G. (2019). Photocontrol of Supramolecular Azo-Containing Block Copolymer Thin Films during Dip-Coating: Toward Nanoscale Patterned Coatings. ACS Applied Nano Materials, 2(6), 3526-3537. https://doi.org/10.1021/acsanm.9b00496

Paananen, R. O., Javanainen, M., Holopainen, J. M., & Vattulainen, I. (2019). Crystalline Wax Esters Regulate the Evaporation Resistance of Tear Film Lipid Layers Associated with Dry Eye Syndrome. Journal of Physical Chemistry Letters, 10(14), 3893-3898. https://doi.org/10.1021/acs.jpclett.9b01187

Banerjee, S. S., Hait, S., Natarajan, T. S., Wießner, S., Stöckelhuber, K. W., Jehnichen, D., ... Das, A. (2019). Water-Responsive and Mechanically Adaptive Natural Rubber Composites by in Situ Modification of Mineral Filler Structures. Journal of Physical Chemistry B, 123(24), 5168-5175. https://doi.org/10.1021/acs.jpcb.9b02125

Hilska, J., Koivusalo, E., Puustinen, J., Suomalainen, S., & Guina, M. (2019). Epitaxial phases of high Bi content GaSbBi alloys. Journal of Crystal Growth, 516, 67-71. https://doi.org/10.1016/j.jcrysgro.2019.03.028

Isoaho, R., Aho, A., Tukiainen, A., Aho, T., Raappana, M., Salminen, T., ... Guina, M. (2019). Photovoltaic properties of low-bandgap (0.7–0.9 eV) lattice-matched GaInNAsSb solar junctions grown by molecular beam epitaxy on GaAs. Solar Energy Materials and Solar Cells, 195, 198-203. https://doi.org/10.1016/j.solmat.2019.02.030

Chintha, A. R., Valtonen, K., Kuokkala, V. T., Kundu, S., Peet, M. J., & Bhadeshia, H. K. D. H. (2019). Role of fracture toughness in impact-abrasion wear. Wear, 428-429, 430-437. https://doi.org/10.1016/j.wear.2019.03.028

Sautter, J. D., Xu, L., Miroshnichenko, A. E., Lysevych, M., Volkovskaya, I., Smirnova, D. A., ... Rahmani, M. (2019). Tailoring Second-Harmonic Emission from (111)-GaAs Nanoantennas. Nano Letters, 19(6), 3905-3911. https://doi.org/10.1021/acs.nanolett.9b01112

Lolicato, F., Joly, L., Martinez-Seara, H., Fragneto, G., Scoppola, E., Baldelli Bombelli, F., ... Maccarini, M. (2019). The Role of Temperature and Lipid Charge on Intake/Uptake of Cationic Gold Nanoparticles into Lipid Bilayers. Small, 15(23), [1805046]. https://doi.org/10.1002/smll.201805046

Sariola, V. (2019). Analytical Expressions for Spring Constants of Capillary Bridges and Snap-in Forces of Hydrophobic Surfaces. Langmuir, 35(22), 7129-7135. https://doi.org/10.1021/acs.langmuir.9b00152

Lai, Y., Zhang, H., Sugano, Y., Xie, H., & Kallio, P. (2019). Correlation of Surface Morphology and Interfacial Adhesive Behavior between Cellulose Surfaces: Quantitative Measurements in Peak-Force Mode with the Colloidal Probe Technique. Langmuir, 35(22), 7312-7321. https://doi.org/10.1021/acs.langmuir.8b03503

Vuornos, K., Ojansivu, M., Koivisto, J. T., Häkkänen, H., Belay, B., Montonen, T., ... Miettinen, S. (2019). Bioactive glass ions induce efficient osteogenic differentiation of human adipose stem cells encapsulated in gellan gum and collagen type I hydrogels. Materials Science and Engineering C, 99, 905-918. https://doi.org/10.1016/j.msec.2019.02.035

Salmi, T., & Schoerling, D. (2019). Energy density-method: An approach for a quick estimation of quench temperatures in high-field accelerator magnets. IEEE Transactions on Applied Superconductivity, 29(4). https://doi.org/10.1109/TASC.2018.2880340

Jokinen, J., & Kanerva, M. (2019). Simulation of Delamination Growth at CFRP-Tungsten Aerospace Laminates Using VCCT and CZM Modelling Techniques. Applied Composite Materials, 26(3), 709-721. https://doi.org/10.1007/s10443-018-9746-5

Pourjamal, S., Hakala, T. K., Nečada, M., Freire-Fernández, F., Kataja, M., Rekola, H., ... Van Dijken, S. (2019). Lasing in Ni Nanodisk Arrays. ACS Nano, 13(5), 5686-5692. https://doi.org/10.1021/acsnano.9b01006

Koivikko, A., & Sariola, V. (2019). Fabrication of soft devices with buried fluid channels by using sacrificial 3D printed molds. In 2019 2nd IEEE International Conference on Soft Robotics (RoboSoft) (pp. 509-513). IEEE. https://doi.org/10.1109/ROBOSOFT.2019.8722741

Hütner, J., Herranen, T., & Laurson, L. (2019). Multistep Bloch-line-mediated Walker breakdown in ferromagnetic strips. Physical Review B, 99(17), [174427]. https://doi.org/10.1103/PhysRevB.99.174427

Iyer, S., Rissanen, M. P., & Kurtén, T. (2019). Reaction between Peroxy and Alkoxy Radicals Can Form Stable Adducts. Journal of Physical Chemistry Letters, 10(9), 2051-2057. https://doi.org/10.1021/acs.jpclett.9b00405

Jaakkola, H., Henno, J., Mäkelä, J., & Thalheim, B. (2019). Artificial intelligence yesterday, today and tomorrow. In K. Skala, Z. Car, P. Pale, D. Huljenic, M. Janjic, M. Koricic, V. Sruk, S. Ribaric, T. G. Grbac, Z. Butkovic, M. Cicin-Sain, D. Skvorc, M. Mauher, S. Babic, S. Gros, B. Vrdoljak, ... E. Tijan (Eds.), 2019 42nd International Convention on Information and Communication Technology, Electronics and Microelectronics, MIPRO 2019 - Proceedings (pp. 860-867). IEEE. https://doi.org/10.23919/MIPRO.2019.8756913

Kahle, H., Phung, H-M., Penttinen, J-P., Rajala, P., Tukiainen, A., Ranta, S., & Guina, M. (2019). Double-side pumped membrane external-cavity surface-emitting laser (MECSEL) with increased efficiency emitting > 3 W in the 780 nm region. In 2019 Conference on Lasers and Electro-Optics, CLEO 2019 - Proceedings IEEE. https://doi.org/10.23919/CLEO.2019.8749958

Gil-Gallegos, S., Klages, R., Solanpää, J., & Räsänen, E. (2019). Energy-dependent diffusion in a soft periodic Lorentz gas. European Physical Journal: Special Topics, 228(1), 143-160. https://doi.org/10.1140/epjst/e2019-800136-8

Abdallah, Z., Stefszky, M., Ulvila, V., Silberhorn, C., & Vainio, M. (2019). Frequency Comb Generation in a Continuous-Wave Pumped Second-Order Nonlinear Waveguide Resonator. In 2019 Conference on Lasers and Electro-Optics, CLEO 2019 - Proceedings IEEE. https://doi.org/10.23919/CLEO.2019.8750403

Kurka, M., Dyksik, M., Suomalainen, S., Koivusalo, E., Guina, M., & Motyka, M. (2019). GaInAsSb/AlGa(In)AsSb type I quantum wells emitting in 3 μm range for application in superluminescent diodes. Optical Materials, 91, 274-278. https://doi.org/10.1016/j.optmat.2019.03.036

Saad-Bin-Alam, M., Reshef, O., Huttunen, M. J., Carlow, G., Sullivan, B., Menard, J. M., ... Boyd, R. W. (2019). High-Q resonance train in a plasmonic metasurface. In 2019 Conference on Lasers and Electro-Optics, CLEO 2019 - Proceedings IEEE. https://doi.org/10.23919/CLEO.2019.8750206

Linna, P., Narra, N., & Grönman, J. (2019). Intelligent data service for farmers. In K. Skala, Z. Car, P. Pale, D. Huljenic, M. Janjic, M. Koricic, V. Sruk, S. Ribaric, T. G. Grbac, Z. Butkovic, M. Cicin-Sain, D. Skvorc, M. Mauher, S. Babic, S. Gros, B. Vrdoljak, ... E. Tijan (Eds.), 2019 42nd International Convention on Information and Communication Technology, Electronics and Microelectronics, MIPRO 2019 - Proceedings (pp. 1072-1075). IEEE. https://doi.org/10.23919/MIPRO.2019.8756688

Sadiek, I., Mikkonen, T., Vainio, M., Toivonen, J., & Foltynowicz, A. (2019). Optical Frequency Comb Photoacoustic Spectroscopy. In 2019 Conference on Lasers and Electro-Optics, CLEO 2019 - Proceedings IEEE. https://doi.org/10.23919/CLEO.2019.8749688

Tuominen, S., & Mäntysalo, M. (2019). Screen printed temporary tattoos for skin-mounted electronics. In IEEE 69th Electronic Components and Technology Conference, ECTC 2019 (pp. 1252-1257). IEEE. https://doi.org/10.1109/ECTC.2019.00194

Ferraris, S., Nommeots-Nomm, A., Spriano, S., Vernè, E., & Massera, J. (2019). Surface reactivity and silanization ability of borosilicate and Mg-Sr-based bioactive glasses. Applied Surface Science, 475, 43-55. https://doi.org/10.1016/j.apsusc.2018.12.218

Henno, J., Jaakkola, H., & Mäkelä, J. (2019). Teaching for virtual work. In K. Skala, Z. Car, P. Pale, D. Huljenic, M. Janjic, M. Koricic, V. Sruk, S. Ribaric, T. G. Grbac, Z. Butkovic, M. Cicin-Sain, D. Skvorc, M. Mauher, S. Babic, S. Gros, B. Vrdoljak, ... E. Tijan (Eds.), 2019 42nd International Convention on Information and Communication Technology, Electronics and Microelectronics, MIPRO 2019 - Proceedings (pp. 818-826). IEEE. https://doi.org/10.23919/MIPRO.2019.8756778

Vuoristo, P., Varis, T., Meschini, D., Bolelli, G., & Lusvarghi, L. (2019). Corrosion properties of thermally sprayed bond coatings under plasma sprayed chromia coating in sulfuric acid solutions. In F. Azarmi, Y. Lau, J. Veilleux, C. Widener, F. Toma, H. Koivuluoto, K. Balani, H. Li, ... K. Shinoda (Eds.), International Thermal Spray Conference and Exposition, ITSC 2019: New Waves of Thermal Spray Technology for Sustainable Growth (pp. 923-930). (Proceedings of the International Thermal Spray Conference). ASM International.

Trainer, D. J., Putilov, A. V., Wang, B., Lane, C., Saari, T., Chang, T. R., ... Iavarone, M. (2019). Moiré superlattices and 2D electronic properties of graphite/MoS2 heterostructures. Journal of Physics and Chemistry of Solids, 128, 325-330. https://doi.org/10.1016/j.jpcs.2017.10.034

Saari, T., & Nieminen, J. (2019). Spin filtering in silicene by edges and chemically or electrically induced interfaces. Journal of Physics and Chemistry of Solids, 128, 316-324. https://doi.org/10.1016/j.jpcs.2017.12.037

Valtonen, K., Ojala, N., Haiko, O., & Kuokkala, V-T. (2019). Comparison of various high-stress wear conditions and wear performance of martensitic steels. Wear, 426-427(Part A), 3-13. https://doi.org/10.1016/j.wear.2018.12.006

Kulig, W., Korolainen, H., Zatorska, M., Kwolek, U., Wydro, P., Kepczynski, M., & Róg, T. (2019). Complex Behavior of Phosphatidylcholine-Phosphatidic Acid Bilayers and Monolayers: Effect of Acyl Chain Unsaturation. Langmuir, 35(17), 5944-5956. https://doi.org/10.1021/acs.langmuir.9b00381

Minarelli, E. L., Poÿhönen, K., Van Dalum, G. A. R., Ojanen, T., & Fritz, L. (2019). Engineering of Chern insulators and circuits of topological edge states. Physical Review B, 99(16), [165413]. https://doi.org/10.1103/PhysRevB.99.165413

Puustinen, J., Hilska, J., & Guina, M. (2019). Analysis of GaAsBi growth regimes in high resolution with respect to As/Ga ratio using stationary MBE growth. Journal of Crystal Growth, 511, 33-41. https://doi.org/10.1016/j.jcrysgro.2019.01.010

Asikainen, S., Paakinaho, K., Kyhkynen, A. K., Hannula, M., Malin, M., Ahola, N., ... Seppälä, J. (2019). Hydrolysis and drug release from poly(ethylene glycol)-modified lactone polymers with open porosity. European Polymer Journal, 113, 165-175. https://doi.org/10.1016/j.eurpolymj.2019.01.056

Zhang, Z., Pan, J., Luo, W., Ramakrishnan, K. R., & Singh, H. K. (2019). Vibration-based delamination detection in curved composite plates. Composites Part A: Applied Science and Manufacturing, 119, 261-274. https://doi.org/10.1016/j.compositesa.2019.02.002

Dmitrieva, I., Lopez-Iscoa, P., Milanese, D., & Petit, L. (2019). Ternary borosilicates as potential cladding glasses for semiconductor core optical fibers. International Journal of Applied Glass Science, 10(2), 151-156. https://doi.org/10.1111/ijag.12874

Kummala, R., Brobbey, K. J., Haapanen, J., Mäkelä, J. M., Gunell, M., Eerola, E., ... Saarinen, J. J. (2019). Antibacterial activity of silver and titania nanoparticles on glass surfaces. ADVANCES IN NATURAL SCIENCES: NANOSCIENCE AND NANOTECHNOLOGY, 10(1), [015012]. https://doi.org/10.1088/2043-6254/ab0882

Gurtovenko, A. A., Javanainen, M., Lolicato, F., & Vattulainen, I. (2019). The Devil Is in the Details: What Do We Really Track in Single-Particle Tracking Experiments of Diffusion in Biological Membranes? Journal of Physical Chemistry Letters, 10(5), 1005-1011. https://doi.org/10.1021/acs.jpclett.9b00065

Berger, P. R., Li, M., Mattei, R. M., Niang, M. A., Talisa, N., Tripepi, M., ... Lupo, D. (2019). Advancements in Solution Processable Devices using Metal Oxides For Printed Internet-of-Things Objects. In 2019 Electron Devices Technology and Manufacturing Conference, EDTM 2019 (pp. 160-162). IEEE. https://doi.org/10.1109/EDTM.2019.8731322

Salo, L., Mylläri, F., Maasikmets, M., Niemelä, V., Konist, A., Vainumäe, K., ... Rönkkö, T. (2019). Emission measurements with gravimetric impactors and electrical devices: An aerosol instrument comparison. Aerosol Science and Technology, 53(5), 526-539. https://doi.org/10.1080/02786826.2019.1578858

Hintikka, J., Mäntylä, A., Vaara, J., Frondelius, T., & Lehtovaara, A. (2019). Stable and unstable friction in fretting contacts. Tribology International, 131, 73-82. https://doi.org/10.1016/j.triboint.2018.10.014

Nurmi, V., Hintikka, J., Juoksukangas, J., Honkanen, M., Vippola, M., Lehtovaara, A., ... Frondelius, T. (2019). The formation and characterization of fretting-induced degradation layers using quenched and tempered steel. Tribology International, 131, 258-267. https://doi.org/10.1016/j.triboint.2018.09.012

Edwards, T. E. J., Di Gioacchino, F., Goodfellow, A. J., Mohanty, G., Wehrs, J., Michler, J., & Clegg, W. J. (2019). Transverse deformation of a lamellar TiAl alloy at high temperature by in situ microcompression. Acta Materialia, 166, 85-99. https://doi.org/10.1016/j.actamat.2018.11.050

Karhu, M., Lagerbom, J., Solismaa, S., Honkanen, M., Ismailov, A., Räisänen, M. L., ... Kivikytö-Reponen, P. (2019). Mining tailings as raw materials for reaction-sintered aluminosilicate ceramics: Effect of mineralogical composition on microstructure and properties. Ceramics International, 45(4), 4840-4848. https://doi.org/10.1016/j.ceramint.2018.11.180

Kanerva, M., Korkiakoski, S., Lahtonen, K., Jokinen, J., Sarlin, E., Palola, S., ... Valden, M. (2019). DLC-treated aramid-fibre composites: Tailoring nanoscale-coating for macroscale performance. Composites Science and Technology, 171, 62-69. https://doi.org/10.1016/j.compscitech.2018.11.043

Garifullin, M., Bronzova, M., Pajunen, S., Mela, K., & Heinisuo, M. (2019). Initial axial stiffness of welded RHS T joints. Journal of Constructional Steel Research, 153, 459-472. https://doi.org/10.1016/j.jcsr.2018.10.025

Siljander, S., Keinänen, P., Ivanova, A., Lehmonen, J., Tuukkanen, S., Kanerva, M., & Björkqvist, T. (2019). Conductive cellulose based foam formed 3D shapes—from innovation to designed prototype. Materials, 12(3), [430]. https://doi.org/10.3390/ma12030430

Murakami, M., Kohara, S., Kitamura, N., Akola, J., Inoue, H., Hirata, A., ... Ohishi, Y. (2019). Ultrahigh-pressure form of Si O2 glass with dense pyrite-type crystalline homology. Physical Review B, 99(4), [045153]. https://doi.org/10.1103/PhysRevB.99.045153

Edwards, T. E. J., Di Gioacchino, F., Goodfellow, A. J., Mohanty, G., Wehrs, J., Michler, J., & Clegg, W. J. (2019). Deformation of lamellar γ-TiAl below the general yield stress. Acta Materialia, 163, 122-139. https://doi.org/10.1016/j.actamat.2018.09.061

Reyes, G., Borghei, M., King, A. W. T., Lahti, J., & Rojas, O. J. (2019). Solvent Welding and Imprinting Cellulose Nanofiber Films Using Ionic Liquids. Biomacromolecules, 20(1), 502-514. https://doi.org/10.1021/acs.biomac.8b01554

Lopez-Iscoa, P., Ojha, N., Aryal, U., Pugliese, D., Boetti, N. G., Milanese, D., & Petit, L. (2019). Spectroscopic properties of Er3+ -doped particles-containing phosphate glasses fabricated using the direct doping method. Materials, 12(1), [129]. https://doi.org/10.3390/ma12010129

van Nugteren, J., Murtomäki, J., Ruuskanen, J., Kirby, G., Hagen, P., DeRijk, G., ... Rossi, L. (2019). A Fast Quench Protection System for High-Temperature Superconducting Magnets. IEEE Transactions on Applied Superconductivity, 29(1), [4700108]. https://doi.org/10.1109/TASC.2018.2848229

Wani, O. M., Verpaalen, R., Zeng, H., Priimagi, A., & Schenning, A. P. H. J. (2019). An Artificial Nocturnal Flower via Humidity-Gated Photoactuation in Liquid Crystal Networks. Advanced Materials, 31(2), [1805985]. https://doi.org/10.1002/adma.201805985

Kiilakoski, J., Puranen, J., Heinonen, E., Koivuluoto, H., & Vuoristo, P. (2019). Characterization of Powder-Precursor HVOF-Sprayed Al2O3-YSZ/ZrO2 Coatings. Journal of Thermal Spray Technology, 28(1-2), 98-107. https://doi.org/10.1007/s11666-018-0816-x

Ruoko, T-P., Hiltunen, A., Iivonen, T., Ulkuniemi, R., Lahtonen, K., Ali-Löytty, H., ... Tkachenko, N. V. (2019). Charge carrier dynamics in tantalum oxide overlayered and tantalum doped hematite photoanodes. Journal of Materials Chemistry A, 7(7), 3206-3215. https://doi.org/10.1039/C8TA09501A

Ojha, N., Tuomisto, M., Lastusaari, M., & Petit, L. (2019). Phosphate glasses with blue persistent luminescence prepared using the direct doping method. Optical Materials, 87, 151-156. https://doi.org/10.1016/j.optmat.2018.03.063

Viheriälä, J., Tuorila, H., Zia, N., Cherchi, M., Aalto, T., & Guina, M. (2019). 1.3μm U-bend traveling wave SOA devices for high efficiency coupling to silicon photonics. In G. T. Reed, & A. P. Knights (Eds.), Silicon Photonics XIV [109230E] (Proceedings of SPIE - The International Society for Optical Engineering; Vol. 10923). SPIE, IEEE. https://doi.org/10.1117/12.2505935

Mereuta, A., Nechay, K., Caliman, A., Suruceanu, G., Gallo, P., Guina, M., & Kapon, E. (2019). 1.55-μm wavelength wafer-fused OP-VECSELs in flip-chip configuration. In U. Keller (Ed.), Vertical External Cavity Surface Emitting Lasers (VECSELs) IX [1090103] (Proceedings of SPIE - The International Society for Optical Engineering; Vol. 10901). SPIE, IEEE. https://doi.org/10.1117/12.2508342

Yadav, A., Chichkov, N. B., Gumenyuk, R., Zherebtsov, E., Melkumov, M. A., Yashkov, M. V., ... Rafailov, E. U. (2019). 405-nm pumped Ce3+-doped silica fiber for broadband fluorescence from cyan to red. In M. J. F. Digonnet, & S. Jiang (Eds.), Optical Components and Materials XVI [1091406] (Proceedings of SPIE - The International Society for Optical Engineering; Vol. 10914). SPIE, IEEE. https://doi.org/10.1117/12.2509599

Leivo, V., Kiviste, M., Aaltonen, A., Prasauskas, T., Martuzevicius, D., & Haverinen-Shaughnessy, U. (2019). Analysis of hygrothermal parameters in Finnish and Lithuanian multi-family buildings before and after energy retrofits. Journal of Building Physics, 42(4). https://doi.org/10.1177/1744259118767236

Galinina, O., Militano, L., Andreev, S., Pyattaev, A., Johnsson, K., Orsino, A., ... Koucheryavy, Y. (2019). Analyzing Competition and Cooperation Dynamics of the Aerial mmWave Access Market. IEEE Access, 7, 87192-87211. https://doi.org/10.1109/ACCESS.2019.2923787

Levämäki, H., Tian, L-Y., Vitos, L., & Ropo, M. (2019). An automated algorithm for reliable equation of state fitting of magnetic systems. Computational Materials Science, 156, 121-128. https://doi.org/10.1016/j.commatsci.2018.09.026

Isasi, I., Zabihi, M., Irusta, U., Eftestøl, T., Rad, A. B., Kramer-Johansen, J., ... Wik, L. (2019). Automatic cardiac rhythm classification with concurrent manual chest compressions. IEEE Access, 7, 115147-115159. https://doi.org/10.1109/ACCESS.2019.2935096

Aho, T., Tukiainen, A., Elsehrawy, F., Ranta, S., Raappana, M., Aho, A., ... Guina, M. (Accepted/In press). Back Reflector with Diffractive Gratings for Light-Trapping in Thin-Film III-V Solar Cells. In 2019 IEEE European Space Power Conference IEEE.

Huttunen-Saarivirta, E., Isotahdon, E., Metsäjoki, J., Salminen, T., Ronkainen, H., & Carpén, L. (2019). Behaviour of leaded tin bronze in simulated seawater in the absence and presence of tribological contact with alumina counterbody: Corrosion, wear and tribocorrosion. Tribology International, 129, 257-271. https://doi.org/10.1016/j.triboint.2018.08.021

Zakeri, F. S., Bätz, M., Jaschke, T., Keinert, J., & Chuchvara, A. (2019). Benchmarking of several disparity estimation algorithms for light field processing. In S. Bazeille, N. Verrier, & C. Cudel (Eds.), Fourteenth International Conference on Quality Control by Artificial Vision [111721C] (Proceedings of SPIE - The International Society for Optical Engineering; Vol. 11172). SPIE, IEEE. https://doi.org/10.1117/12.2521747

Mandal, S., George, L., & Tkachenko, N. V. (2019). Charge transfer dynamics in CsPbBr3 perovskite quantum dots-anthraquinone/fullerene (C60) hybrids. Nanoscale, 11(3), 862-869. https://doi.org/10.1039/c8nr08445a

Nyyssönen, T., Peura, P., De Moor, E., Kuokkala, V-T., & Williamson, D. L. (2019). Crystallography and Mechanical Properties of Intercritically Annealed Quenched and Partitioned High-Aluminium Steel. Materials Characterization. https://doi.org/10.1016/j.matchar.2018.12.004

Lopez-Iscoa, P., Ojha, N., Pugliese, D., Mishra, A., Gumenyuk, R., Boetti, N. G., ... Petit, L. (2019). Design, processing, and characterization of an optical core-bioactive clad phosphate fiber for biomedical applications. JOURNAL OF THE AMERICAN CERAMIC SOCIETY. https://doi.org/10.1111/jace.16553

Houaoui, A., Lyyra, I., Agniel, R., Pauthe, E., Massera, J., & Boissière, M. (2019). Dissolution, bioactivity and osteogenic properties of composites based on polymer and silicate or borosilicate bioactive glass. Materials Science and Engineering C, 107, [110340]. https://doi.org/10.1016/j.msec.2019.110340

Suokas, E. (2019). Effect of polyolefin molecular structure on product properties in extrusion coating. In 17th Biennial TAPPI European PLACE Conference 2019 (pp. 89-98). TAPPI Press.

Palmroth, A., Salpavaara, T., Lekkala, J., & Kellomäki, M. (2019). Fabrication and Characterization of a Wireless Bioresorbable Pressure Sensor. Advanced Materials Technologies, [1900428]. https://doi.org/10.1002/admt.201900428

Ntakaris, A., Mirone, G., Kanniainen, J., Gabbouj, M., & Iosifidis, A. (2019). Feature Engineering for Mid-Price Prediction with Deep Learning. IEEE Access, 7, 82390-82412. https://doi.org/10.1109/ACCESS.2019.2924353

Bermejo-Velasco, D., Kadekar, S., Tavares Da Costa, M. V., Oommen, O. P., Gamstedt, K., Hilborn, J., & Varghese, O. P. (2019). First Aldol Cross-Linked Hyaluronic Acid Hydrogel: Fast and Hydrolytically Stable Hydrogel with Tissue Adhesive Properties. ACS Applied Materials and Interfaces. https://doi.org/10.1021/acsami.9b10239

Mereuta, A., Nechay, K., Caliman, A., Suruceanu, G., Rudra, A., Gallo, P., ... Kapon, E. (2019). Flip-chip Wafer-fused OP-VECSELs emitting 3.65 W at the 1.55-μm waveband. IEEE Journal of Selected Topics in Quantum Electronics, 25(6). https://doi.org/10.1109/JSTQE.2019.2922819

Salonius, E., Muhonen, V., Lehto, K., Järvinen, E., Pyhältö, T., Hannula, M., ... Kiviranta, I. (2019). Gas-foamed poly(lactide-co-glycolide) and poly(lactide-co-glycolide) with bioactive glass fibres demonstrate insufficient bone repair in lapine osteochondral defects. Journal of Tissue Engineering and Regenerative Medicine, 13(3), 406-415. https://doi.org/10.1002/term.2801

Brobbey, K. J., Haapanen, J., Tuominen, M., Mäkelä, J., Gunell, M., Eerola, E., ... Toivakka, M. (2019). High-speed production of antibacterial fabrics using liquid flame spray. Textile Research Journal. https://doi.org/10.1177/0040517519866952

Tomaskovic-Crook, E., Zhang, P., Ahtiainen, A., Kaisvuo, H., Lee, C. Y., Beirne, S., ... Crook, J. M. (2019). Human Neural Tissues from Neural Stem Cells Using Conductive Biogel and Printed Polymer Microelectrode Arrays for 3D Electrical Stimulation. ADVANCED HEALTHCARE MATERIALS, [1900425]. https://doi.org/10.1002/adhm.201900425

Valtonen, K., Ratia, V., Ramakrishnan, K. R., Apostol, M., Terva, J., & Kuokkala, V-T. (2019). Impact wear and mechanical behavior of steels at subzero temperatures. Tribology International, 129, 476-493. https://doi.org/10.1016/j.triboint.2018.08.016

Lu, X., Sopin, E., Petrov, V., Galinina, O., Moltchanov, D., Ageev, K., ... Dohler, M. (2019). Integrated Use of Licensed-and Unlicensed-Band mmWave Radio Technology in 5G and beyond. IEEE Access, 7, 24376-24391. https://doi.org/10.1109/ACCESS.2019.2900195

Mishra, A., Ojansivu, M., Autio, R., Vanhatupa, S., Miettinen, S., & Massera, J. (Accepted/In press). In-vitro dissolution characteristics and human adipose stem cell response to novel borophosphate glasses. Journal of Biomedical Materials Research - Part A. https://doi.org/10.1002/jbm.a.36722

Sharma, V., Yiannacou, K., Karjalainen, M., Lahtonen, K., Valden, M., & Sariola, V. (2019). Large-scale efficient water harvesting using bioinspired micro-patterned copper oxide nanoneedle surfaces and guided droplet transport. Nanoscale Advances, 1(10), 4025-4040. https://doi.org/10.1039/c9na00405j

Shin, M., Kim, J., Jung, Y. K., Ruoko, T-P., Priimagi, A., Walsh, A., & Shin, B. (2019). Low-dimensional formamidinium lead perovskite architectures via controllable solvent intercalation. Journal of Materials Chemistry C, 7(13), 3945-3951. https://doi.org/10.1039/c9tc00379g

Lahti, J. (2019). Market implementation of active and intelligent packaging-opportunities from a socio-economic perspective. In 17th Biennial TAPPI European PLACE Conference 2019 (pp. 419-427). TAPPI Press.

Kahle, H., Penttinen, J. P., Phung, H. M., Rajala, P., Tukiainen, A., Ranta, S., & Guina, M. (2019). MECSELs with direct emission in the 760 nm to 810 nm spectral range: A single- and double-side pumping comparison and high-power continuous-wave operation. In U. Keller (Ed.), Vertical External Cavity Surface Emitting Lasers (VECSELs) IX [109010D] (Proceedings of SPIE - The International Society for Optical Engineering; Vol. 10901). SPIE, IEEE. https://doi.org/10.1117/12.2512111

Järvinen, H., Honkanen, M., Oja, O., Järvenpää, M., & Peura, P. (2019). Microstructure-property relationships of novel ultra-high strength press hardening steels. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 50(2), 816-836. https://doi.org/10.1007/s11661-018-4967-7

Mandal, S., & Tkachenko, N. V. (2019). Multiphoton Excitation of CsPbBr3 Perovskite Quantum Dots (PQDs): How Many Electrons Can One PQD Donate to Multiple Molecular Acceptors? Journal of Physical Chemistry Letters, 2775-2781. https://doi.org/10.1021/acs.jpclett.9b01045

Lahti, J. (2019). Nanocellulose and Polylactic Acid Based Multilayer Coatings for Barrier Applications. In 17th Biennial TAPPI European PLACE Conference 2019 (pp. 446-455). TAPPI Press.

Radevici, I., Sadi, T., Tripurari, T., Tiira, J., Ranta, S., Tukiainen, A., ... Oksanen, J. (2019). Observation of local electroluminescent cooling and identifying the remaining challenges. In D. V. Seletskiy, R. I. Epstein, & M. Sheik-Bahae (Eds.), Photonic Heat Engines: Science and Applications [109360A] (Proceedings of SPIE - The International Society for Optical Engineering; Vol. 10936). SPIE, IEEE. https://doi.org/10.1117/12.2505814

Haapanen, J., Aromaa, M., Teisala, H., Juuti, P., Tuominen, M., Sillanpää, M., ... Mäkelä, J. M. (2019). On the limit of superhydrophobicity: Defining the minimum amount of TiO2 nanoparticle coating. Materials Research Express, 6(3), [035004]. https://doi.org/10.1088/2053-1591/aaf2ee

Ometov, A., Moltchanov, D., Komarov, M., Volvenko, S. V., & Koucheryavy, Y. (2019). Packet level performance assessment of mmWave backhauling technology for 3GPP NR Systems. IEEE Access, 7, 9860-9871. https://doi.org/10.1109/ACCESS.2018.2890558

Abramov, S. K., Abramova, V. V., Lukin, V. V., & Egiazarian, K. O. (2019). Prediction of signal denoising efficiency for DCT-based filter. Telecommunications and Radio Engineering, 78(13), 1129-1142. https://doi.org/10.1615/TelecomRadEng.v78.i13.10

Schubert, M., Rasche, J., Laurila, M-M., Vuorinen, T., Mäntysalo, M., & Bock, K. (2019). Printed flexible microelectrode for application of nanosecond pulsed electric fields on cells. Materials, 12(7), [2713]. https://doi.org/10.3390/ma12172713

Kiilakoski, J., Trache, R., Björklund, S., Joshi, S., & Vuoristo, P. (2019). Process Parameter Impact on Suspension-HVOF-Sprayed Cr2O3 Coatings. Journal of Thermal Spray Technology. https://doi.org/10.1007/s11666-019-00940-7

Chen, X., Ukkonen, L., & Virkki, J. (2019). Reliability evaluation of wearable radio frequency identification tags: Design and fabrication of a two-part textile antenna. Textile Research Journal, 89(4). https://doi.org/10.1177/0040517517750651

Alanen, J., Ruiz Morales, E., Muhammad, A., Saarinen, H., & Minkkinen, J. (2019). Remote diagnostics application software for remote handling equipment. Fusion Engineering and Design. https://doi.org/10.1016/j.fusengdes.2019.01.125

Barberi, J., Baino, F., Fiume, E., Orlygsson, G., Nommeots-Nomm, A., Massera, J., & Verné, E. (2019). Robocasting of SiO2-based bioactive glass scaffolds with porosity gradient for bone regeneration and potential load-bearing applications. Materials, 12(7), [2691]. https://doi.org/10.3390/ma12172691

Jokiaho, T., Santa-aho, S., Peura, P., & Vippola, M. (2019). Role of Steel Plate Thickness on the Residual Stress Formation and Cracking Behavior During Flame Cutting. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. https://doi.org/10.1007/s11661-019-05314-w

Linjamaa, A., Lehtovaara, A., Kallio, M., & Léger, A. (2019). Running-in effects on friction of journal bearings under slow sliding speeds. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. https://doi.org/10.1177/1350650119864758

Kocsis, P., Shevkunov, I., Katkovnik, V., & Egiazarian, K. (2019). Single exposure lensless subpixel phase imaging. In B. C. Kress, & P. Schelkens (Eds.), Digital Optical Technologies 2019 (Proceedings of SPIE - The International Society for Optical Engineering; Vol. 11062). SPIE, IEEE. https://doi.org/10.1117/12.2525679

Fliervoet, L. A. L., Lisitsyna, E. S., Durandin, N. A., Kotsis, I., Maas-Bakker, R. F. M., Yliperttula, M., ... Vermonden, T. (2019). Structure and Dynamics of Thermosensitive pDNA Polyplexes Studied by Time-Resolved Fluorescence Spectroscopy. Biomacromolecules. https://doi.org/10.1021/acs.biomac.9b00896

Banerjee, S. S., Natarajan, T. S., Subramani B., E., Wießner, S., Janke, A., Heinrich, G., & Das, A. (2019). Temperature scanning stress relaxation behavior of water responsive and mechanically adaptive elastomer nanocomposites. Journal of Applied Polymer Science, [48344]. https://doi.org/10.1002/app.48344

He, H., Chen, X., Ukkonen, L., & Virkki, J. (2019). Textile-integrated three-dimensional printed and embroidered structures for wearable wireless platforms. Textile Research Journal, 89(4). https://doi.org/10.1177/0040517517750649

Vladimirov, S. S., Pirmagomedov, R., Kirichek, R., & Koucheryavy, A. (2019). Unique Degradation of Flash Memory as an Identifier of ICT Device. IEEE Access, 7, 107626-107634. https://doi.org/10.1109/ACCESS.2019.2932804

Vuorinen, T., Noponen, K., Vehkaoja, A., Onnia, T., Laakso, E., Leppänen, S., ... Mäntysalo, M. (2019). Validation of Printed, Skin-Mounted Multilead Electrode for ECG Measurements. Advanced Materials Technologies, [1900246]. https://doi.org/10.1002/admt.201900246

Seshadri, S., Juvela, L., Räsänen, O., & Alku, P. (2019). Vocal Effort Based Speaking Style Conversion Using Vocoder Features and Parallel Learning. IEEE Access, 7, 17230-17246. https://doi.org/10.1109/ACCESS.2019.2895923

Tuominen, M., Mäkelä, J., Yasir, M., Dahl, J., Granroth, S., Lehtiö, J. P., ... Kokko, K. (2018). Oxidation-Induced Changes in the ALD-Al2O3/InAs(100) Interface and Control of the Changes for Device Processing. ACS Applied Materials and Interfaces, 10(51), 44932-44940. https://doi.org/10.1021/acsami.8b17843

Joost, U., Sutka, A., Oja, M., Smits, K., Doebelin, N., Loot, A., ... Nommiste, E. (2018). Reversible photodoping of TiO2 nanoparticles. Chemistry of Materials, 30(24), 8968-8974. https://doi.org/10.1021/acs.chemmater.8b04813

Czaplicki, R., Kiviniemi, A., Huttunen, M. J., Zang, X., Stolt, T., Vartiainen, I., ... Kauranen, M. (2018). Less Is More: Enhancement of Second-Harmonic Generation from Metasurfaces by Reduced Nanoparticle Density. Nano Letters, 18(12), 7709-7714. https://doi.org/10.1021/acs.nanolett.8b03378

Garifullin, M. (2018). Experimental moment resistance of rectangular hollow section T joints. MATEC Web of Conferences, 245, [08003]. https://doi.org/10.1051/matecconf/201824508003

Aakko-Saksa, P., Koponen, P., Aurela, M., Vesala, H., Piimäkorpi, P., Murtonen, T., ... Timonen, H. (2018). Considerations in analysing elemental carbon from marine engine exhaust using residual, distillate and biofuels. Journal of Aerosol Science, 126, 191-204. https://doi.org/10.1016/j.jaerosci.2018.09.005

Hokka, M., Rämö, J., Mardoukhi, A., Vuoristo, T., Roth, A., & Kuokkala, V. T. (2018). Effects of Microstructure on the Dynamic Strain Aging in Ferritic-Pearlitic Steels. Journal of Dynamic Behavior of Materials, 4(4), 452-463. https://doi.org/10.1007/s40870-018-0169-z

Murtomäki, J. S., van Nugteren, J., Kirby, G., DeRijk, G., Rossi, L., & Stenvall, A. (2018). ICED - Inductively Coupled Energy Dissipater for Future High Field Accelerator Magnets. IEEE Transactions on Applied Superconductivity, 28(8), [ 4009015]. https://doi.org/10.1109/TASC.2018.2841909

Kroon, M., Talvitie, E., Miettinen, S., & Kellomäki, M. (2018). Cell response to round and star-shaped polylactide fibers. Paper presented at BioMediTech Research Day 2018, Tampere, Finland.

Casula, R., Penttinen, J-P., Guina, M., Kemp, A. J., & Hastie, J. E. (2018). Cascaded crystalline raman lasers for extended wavelength coverage: Continuous-wave, third-stokes operation. Optica, 5(11), 1406-1413. https://doi.org/10.1364/OPTICA.5.001406

Gunes, M., Ukelge, M. O., Donmez, O., Erol, A., Gumus, C., Alghamdi, H., ... Guina, M. (2018). Optical properties of GaAs1-xBix/GaAs quantum well structures grown by molecular beam epitaxy on (100) and (311)B GaAs substrates. Semiconductor Science and Technology, 33(12), [124015]. https://doi.org/10.1088/1361-6641/aaea2e

Habib, M., Ozbay, E., & Caglayan, H. (2018). Tunable Reflection Type Plasmon Induced Transparency with Graphene. In 2018 12th International Congress on Artificial Materials for Novel Wave Phenomena, METAMATERIALS 2018 (pp. 170-172). IEEE. https://doi.org/10.1109/MetaMaterials.2018.8534142

Ottosen, N. S., Ristinmaa, M., & Kouhia, R. (2018). Enhanced multiaxial fatigue criterion that considers stress gradient effects. International Journal of Fatigue, 116, 128-139. https://doi.org/10.1016/j.ijfatigue.2018.05.024

Huttunen-Saarivirta, E., Isotahdon, E., Metsäjoki, J., Salminen, T., Carpén, L., & Ronkainen, H. (2018). Tribocorrosion behaviour of aluminium bronze in 3.5 wt.% NaCl solution. Corrosion Science, 144, 207-223. https://doi.org/10.1016/j.corsci.2018.08.058

Nair, D. G., Rasilo, P., & Arkkio, A. (2018). Sensitivity Analysis of Inverse Thermal Modeling to Determine Power Losses in Electrical Machines. IEEE Transactions on Magnetics, 54(11), [8109405]. https://doi.org/10.1109/TMAG.2018.2853084

Narongthong, J., Das, A., Le, H. H., Wießner, S., & Sirisinha, C. (2018). An efficient highly flexible strain sensor: Enhanced electrical conductivity, piezoresistivity and flexibility of a strongly piezoresistive composite based on conductive carbon black and an ionic liquid. Composites Part A: Applied Science and Manufacturing, 113, 330-338. https://doi.org/10.1016/j.compositesa.2018.08.004

Saeidi, S., Rasekh, P., Awan, K. M., Tüğen, A., Huttunen, M. J., & Dolgaleva, K. (2018). Demonstration of optical nonlinearity in InGaAsP/InP passive waveguides. Optical Materials, 84, 524-530. https://doi.org/10.1016/j.optmat.2018.07.037

Pihlman, H., Keränen, P., Paakinaho, K., Linden, J., Hannula, M., Manninen, I. K., ... Laitinen-Vapaavuori, O. (2018). Novel osteoconductive β-tricalcium phosphate/poly(L-lactide-co-e-caprolactone) scaffold for bone regeneration: a study in a rabbit calvarial defect. Journal of Materials Science: Materials in Medicine, 29(10), [156]. https://doi.org/10.1007/s10856-018-6159-9

Šutka, A., Käämbre, T., Joost, U., Kooser, K., Kook, M., Duarte, R. F., ... Smits, K. (2018). Solvothermal synthesis derived Co-Ga codoped ZnO diluted magnetic degenerated semiconductor nanocrystals. Journal of Alloys and Compounds, 763, 164-172. https://doi.org/10.1016/j.jallcom.2018.05.036

Del Cerro, P. R., Saarinen, M., Massera, J., Norrbo, I., Lastusaari, M., & Petit, L. (2018). Processing and Characterization of Bioactive Borosilicate Glasses and Scaffolds with Persistent Luminescence. In 2018 20th International Conference on Transparent Optical Networks, ICTON 2018 (Vol. 2018-July). [8473916] (Conference proceedings : International Conference on Transparent Optical Networks). IEEE COMPUTER SOCIETY PRESS. https://doi.org/10.1109/ICTON.2018.8473916

Keinänen, P., Das, A., & Vuorinen, J. (2018). Further enhancement of mechanical properties of conducting rubber composites based on multiwalled carbon nanotubes and Nitrile Rubber by solvent treatment. Materials, 11(10), [1806]. https://doi.org/10.3390/ma11101806

Rajan, R., Rainosalo, E., Ramamoorthy, S. K., Thomas, S. P., Zavašnik, J., Vuorinen, J., & Skrifvars, M. (2018). Mechanical, thermal, and burning properties of viscose fabric composites: Influence of epoxy resin modification. Journal of Applied Polymer Science, 135(36), [46673]. https://doi.org/10.1002/app.46673

Kroon, M., Talvitie, E., Miettinen, S., & Kellomäki, M. (2018). A COMPARATIVE IN VITRO STUDY OF CELL GROWTH ON TEXTILE SCAFFOLDS FOR TISSUE ENGINEERING APPLICATIONS. Paper presented at ESB2018 - 29th Annual Meeting of European Society for Biomaterials, Maastricht, Netherlands.

Saari, S., Arffman, A., Harra, J., Rönkkö, T., & Keskinen, J. (2018). Performance evaluation of the HR-ELPI + inversion. Aerosol Science and Technology, 52(9), 1037-1047. https://doi.org/10.1080/02786826.2018.1500679

Bomberg, M., Miettinen, H., Wahlström, M., Kaartinen, T., Ahoranta, S., Lakaniemi, A-M., & Kinnunen, P. (2018). Post operation inactivation of acidophilic bioleaching microorganisms using natural chloride-rich mine water. Hydrometallurgy, 180, 236-245. https://doi.org/10.1016/j.hydromet.2018.06.013

Kaksonen, A. H., Boxall, N. J., Gumulya, Y., Khaleque, H. N., Morris, C., Bohu, T., ... Lakaniemi, A-M. (2018). Recent progress in biohydrometallurgy and microbial characterisation. Hydrometallurgy, 180, 7-25. https://doi.org/10.1016/j.hydromet.2018.06.018

Aho, A., Isoaho, R., Tukiainen, A., Gori, G., Campesato, R., & Guina, M. (2018). Dilute nitride triple junction solar cells for space applications: Progress towards highest AM0 efficiency. Progress in Photovoltaics: Research and Applications, 26(19), 740-744. https://doi.org/10.1002/pip.3011

Yadav, A., Chichkov, N. B., Gumenyuk, R., Zherebtsov, E., Melkumov, M. A., Yashkov, M. V., ... Rafailov, E. U. (2018). Fluorescence bandwidth of 280nm from broadband Ce3+-doped silica fiber pumped with blue laser diode. In 2018 International Conference Laser Optics (ICLO) (pp. 133-133). [8435861] IEEE. https://doi.org/10.1109/LO.2018.8435861

Järvinen, A., Keskinen, J., & Yli-Ojanperä, J. (2018). Extending the Faraday cup aerosol electrometer based calibration method up to 5 µm. Aerosol Science and Technology, 52(8), 828-840. https://doi.org/10.1080/02786826.2018.1472742

Sajna, M. S., Perumbilavil, S., Prakashan, V. P., Sanu, M. S., Joseph, C., Biju, P. R., & Unnikrishnan, N. V. (2018). Enhanced resonant nonlinear absorption and optical limiting in Er3+ ions doped multicomponent tellurite glasses. Materials Research Bulletin, 104, 227-235. https://doi.org/10.1016/j.materresbull.2018.04.026

Maina, M. R., Okamoto, Y., Okada, A., Närhi, M., Kangastupa, J., & Vihinen, J. (2018). High surface quality welding of aluminum using adjustable ring-mode fiber laser. Journal of Materials Processing Technology, 258, 180-188. https://doi.org/10.1016/j.jmatprotec.2018.03.030

Cemlyn, B., Adams, M., Harbord, E., Li, N., Henning, I. D., Oulton, R., ... Guina, M. (2018). Near-threshold high spin amplification in a 1300 nm GaInNAs spin laser. Semiconductor Science and Technology, 33(9), [094005]. https://doi.org/10.1088/1361-6641/aad42e

Mosallaei, M., Jokinen, J., Honkanen, M., Iso-Ketola, P., Vippola, M., Vanhala, J., ... Mantysalo, M. (2018). Geometry Analysis in Screen-Printed Stretchable Interconnects. IEEE Transactions on Components, Packaging and Manufacturing Technology, 8(8), 1344-1352. https://doi.org/10.1109/TCPMT.2018.2854635

Hiltunen, A., Ruoko, T-P., Iivonen, T., Lahtonen, K., Ali-Löytty, H., Sarlin, E., ... Tkachenko, N. (2018). Design aspects of all atomic layer deposited TiO2–Fe2O3 scaffold-absorber photoanodes for water splitting. Sustainable Energy & Fuels, 2(9), 2124-2130. https://doi.org/10.1039/C8SE00252E

Mikkonen, R., Lahokallio, S., Frisk, L., & Mäntysalo, M. (2018). Processing of printed silver patterns on an ETFE substrate. In Proceedings - 2018 IMAPS Nordic Conference on Microelectronics Packaging, NORDPAC 2018 (pp. 1-7). [8423860] IEEE. https://doi.org/10.23919/NORDPAC.2018.8423860

Abu Khamidakh, A. E., Rodriguez-Martinez, A., Kaarniranta, K., Kallioniemi, A., Skottman, H., Hyttinen, J., & Juuti-Uusitalo, K. (2018). Wound healing of human embryonic stem cell-derived retinal pigment epithelial cells is affected by maturation stage. BioMedical Engineering Online, 17(1), [102]. https://doi.org/10.1186/s12938-018-0535-z

Prando, G. A., Orsi Gordo, V., Puustinen, J., Hilska, J., Alghamdi, H. M., Som, G., ... Guina, M. (2018). Exciton localization and structural disorder of GaAs1-xBix/GaAs quantum wells grown by molecular beam epitaxy on (311)B GaAs substrates. Semiconductor Science and Technology, 33(8), [084002]. https://doi.org/10.1088/1361-6641/aad02e

Kulju, S., Riegger, L., Koltay, P., Mattila, K., & Hyväluoma, J. (2018). Fluid flow simulations meet high-speed video: Computer vision comparison of droplet dynamics. Journal of Colloid and Interface Science, 522, 48-56. https://doi.org/10.1016/j.jcis.2018.03.053

Zhao, J., Prioli, M., Stenvall, A., Salmi, T., Gao, Y., Caiffi, B., ... Sorbi, M. (2018). Mechanical stress analysis during a quench in CLIQ protected 16 T dipole magnets designed for the future circular collider. Physica C: Superconductivity and its Applications, 550, 27-34. https://doi.org/10.1016/j.physc.2018.04.003

Quik, J. T. K., Bakker, M., van de Meent, D., Poikkimäki, M., Dal Maso, M., & Peijnenburg, W. (2018). Directions in QPPR development to complement the predictive models used in risk assessment of nanomaterials. NanoImpact, 11, 58-66. https://doi.org/10.1016/j.impact.2018.02.003

Mikkonen, R., & Mäntysalo, M. (2018). Evaluation of screen printed silver trace performance and long-term reliability against environmental stress on a low surface energy substrate. Microelectronics Reliability, 86, 54-65. https://doi.org/10.1016/j.microrel.2018.05.010

Roldán Del Cerro, P., Salminen, T., Lastusaari, M., & Petit, L. (2018). Persistent luminescent borosilicate glasses using direct particles doping method. Scripta Materialia, 151, 38-41. https://doi.org/10.1016/j.scriptamat.2018.03.034

Nommeots-Nomm, A., Boetti, N. G., Salminen, T., Massera, J., Hokka, M., & Petit, L. (2018). Luminescence of Er3+ doped oxyfluoride phosphate glasses and glass-ceramics. Journal of Alloys and Compounds, 751, 224-230. https://doi.org/10.1016/j.jallcom.2018.04.101

Santa-aho, S., Deveci, M., Savolainen, S., & Vippola, M. (2018). Manufacturing of calibration samples for barkhausen noise method: case studies on temperature controlled laser and hydrogen-oxygen flame. In Proceedings of the 12th ECNDT: June 11-15, Gothenburg, Sweden, 2018

Chen, X., He, H., Ukkonen, L., Virkki, J., Lu, Y., & Lam, H. (2018). Fabrication and reliability evaluation of passive UHF RFID T-shirts. In 2018 IEEE International Workshop on Antenna Technology, iWAT2018 - Proceedings (pp. 1-4). IEEE. https://doi.org/10.1109/IWAT.2018.8379146

Lahdensivu, J., Köliö, A., & Husaini, D. (2018). Alkali-silica reaction in Southern-Finland's bridges. Case Studies in Construction Materials, 8, 469-475. https://doi.org/10.1016/j.cscm.2018.03.006

Todesco, E., Annarella, M., Ambrosio, G., Apollinari, G., Ballarino, A., Bajas, H., ... Yu, M. (2018). Progress on HL-LHC Nb3Sn Magnets. IEEE Transactions on Applied Superconductivity, 28(4), [4008809]. https://doi.org/10.1109/TASC.2018.2830703

Cheng, D., Salmi, T., Xu, Q., Peng, Q., Wang, C., Wang, Y., ... Zhang, K. (2018). Quench simulation results for a 12-T twin-aperture dipole magnet. Cryogenics, 92, 13-19. https://doi.org/10.1016/j.cryogenics.2018.03.005

Kaunisto, K., Kotilainen, M., Karhu, M., Lagerbom, J., Vuorinen, T., Honkanen, M., ... Turunen, E. (2018). The effect of carbon and nickel additions on the precursor synthesis of Cr3C2-Ni nanopowder. Ceramics International, 44(8), 9338-9346. https://doi.org/10.1016/j.ceramint.2018.02.146

Javaheri, V., Nyyssönen, T., Grande, B., & Porter, D. (2018). Computational design of a novel medium-carbon, low-alloy steel microalloyed with niobium. Journal of Materials Engineering and Performance, 27(6), 2978-2992. https://doi.org/10.1007/s11665-018-3376-9

Ojha, N., Laihinen, T., Salminen, T., Lastusaari, M., & Petit, L. (2018). Influence of the phosphate glass melt on the corrosion of functional particles occurring during the preparation of glass-ceramics. Ceramics International, 44(10), 11807-11811. https://doi.org/10.1016/j.ceramint.2018.03.267

Murtomäki, J. S., Kouhia, R., Stenvall, A., Bottura, L., Kirby, G., van Nugteren, J., ... Rossi, L. (2018). Investigation of REBCO Roebel Cable Irreversible Critical Current Degradation Under Transverse Pressure. IEEE Transactions on Applied Superconductivity, 28(4), [4802506]. https://doi.org/10.1109/TASC.2018.2829150

Goyos-Ball, L., Prado, C., Díaz, R., Fernández, E., Ismailov, A., Kumpulainen, T., ... Fernández, A. (2018). The effects of laser patterning 10CeTZP-Al2O3 nanocomposite disc surfaces: Osseous differentiation and cellular arrangement in vitro. Ceramics International, 44(8), 9472-9478. https://doi.org/10.1016/j.ceramint.2018.02.164

van Nugteren, J., Kirby, G., Murtomaki, J., DeRijk, G., Rossi, L., & Stenvall, A. (2018). Towards REBCO 20T+ Dipoles for Accelerators. IEEE Transactions on Applied Superconductivity, 28(4), [ 4008509]. https://doi.org/10.1109/TASC.2018.2820177

Saari, J., Ali-Löytty, H., & Valden, M. (2018). Role of Oxide Defects in ALD grown TiO2 Coatings on Performance as Photoanode Protection Layer. Paper presented at Optics & Photonics Days 2018, Jyväskylä, Finland.

Bawazir, S. S., Sofotasios, P. C., Muhaidat, S., Al-Hammadi, Y., & Karagiannidis, G. K. (2018). Multiple Access for Visible Light Communications: Research Challenges and Future Trends. IEEE Access, 6, 26167-26174. https://doi.org/10.1109/ACCESS.2018.2832088

Rasappa, S., Schulte, L., Borah, D., Hulkkonen, H., Ndoni, S., Salminen, T., ... Niemi, T. (2018). Morphology evolution of PS-b-PDMS block copolymer and its hierarchical directed self-assembly on block copolymer templates. Microelectronic Engineering, 192, 1-7. https://doi.org/10.1016/j.mee.2018.02.002

Raappana, M., Polojärvi, V., Aho, A., Mäkelä, J., Aho, T., Tukiainen, A., ... Guina, M. (2018). Wet etching of dilute nitride GaInNAs, GaInNAsSb, and GaNAsSb alloys lattice-matched to GaAs. Corrosion Science, 136, 268-274. https://doi.org/10.1016/j.corsci.2018.03.018

Tuukkanen, S. (2018). Nanofibrillated and bacterial celluloses as renewable piezoelectric sensor materials. Paper presented at Micronano System Workshop, Espoo, Finland.

Sarcan, F., Mutlu, S., Cokduygulular, E., Donmez, O., Erol, A., Puustinen, J., & Guina, M. (2018). A study of electric transport in n- and p-type modulation-doped GaInNAs/GaAs quantum well structures under a high electric field. Semiconductor Science and Technology, 33(6), [064003]. https://doi.org/10.1088/1361-6641/aabc39

Sutka, A., Timusk, M., Joost, U., Ignatans, R., & Maiorov, M. (2018). Switchable light reflectance in dilute magneto-optical colloids based on nickel ferrite nanowires. e-Journal of Surface Science and Nanotechnology, 16, 119-121. https://doi.org/10.1380/ejssnt.2018.119

Harra, J., Tuominen, M., Juuti, P., Rissler, J., Koivuluoto, H., Haapanen, J., ... Mäkelä, J. M. (2018). Characteristics of nFOG, an aerosol-based wet thin film coating technique. Journal of Coatings Technology Research, 15(3), 623-632. https://doi.org/10.1007/s11998-017-0022-7

Melcr, J., Martinez-Seara, H., Nencini, R., Kolafa, J., Jungwirth, P., & Ollila, O. H. S. (2018). Accurate Binding of Sodium and Calcium to a POPC Bilayer by Effective Inclusion of Electronic Polarization. Journal of Physical Chemistry B, 122(16), 4546-4557. https://doi.org/10.1021/acs.jpcb.7b12510

Nugteren, J. V., Kirby, G., Bajas, H., Bajko, M., Ballarino, A., Bottura, L., ... Yang, Y. (2018). Powering of an HTS dipole insert-magnet operated standalone in helium gas between 5 and 85 K. Superconductor Science and Technology, 31(6), [065002]. https://doi.org/10.1088/1361-6668/aab887

Guina, M., Isoaho, R., Viheriälä, J., Aho, A., Aho, A., & Tukiainen, A. (2018). Quantum-well Laser Emitting at 1.2 μm-1.3 μm Window Monolithically Integrated on Ge Substrate. In 43rd European Conference on Optical Communication, ECOC 2017 (pp. 1-3). IEEE. https://doi.org/10.1109/ECOC.2017.8345837

Khan, M., Koivisto, J., Hukka, T., Hokka, M., & Kellomäki, M. (2018). Composite Hydrogels Using Bioinspired Approach with in Situ Fast Gelation and Self-Healing Ability as Future Injectable Biomaterial. ACS Applied Materials & Interfaces, 10(14), 11950-11960. https://doi.org/10.1021/acsami.8b01351

Magarkar, A., Parkkila, P., Viitala, T., Lajunen, T., Mobarak, E., Licari, G., ... Bunker, A. (2018). Membrane bound COMT isoform is an interfacial enzyme: General mechanism and new drug design paradigm. Chemical Communications, 54(28), 3440-3443. https://doi.org/10.1039/c8cc00221e

Åkerblom, M., Raumonen, P., Casella, E., Disney, M. I., Danson, F. M., Gaulton, R., ... Kaasalainen, M. (2018). Non-intersecting leaf insertion algorithm for tree structure models. Interface Focus, 8(2), [20170045]. https://doi.org/10.1098/rsfs.2017.0045

Kaasalainen, S., Åkerblom, M., Nevalainen, O., Hakala, T., & Kaasalainen, M. (2018). Uncertainty in multispectral lidar signals caused by incidence angle effects. Interface Focus, 8(2), [20170033]. https://doi.org/10.1098/rsfs.2017.0033

Disney, M. I., Boni Vicari, M., Burt, A., Calders, K., Lewis, S. L., Raumonen, P., & Wilkes, P. (2018). Weighing trees with lasers: Advances, challenges and opportunities. Interface Focus, 8(2), [20170048]. https://doi.org/10.1098/rsfs.2017.0048

Matikainen, V., Koivuluoto, H., Vuoristo, P., Schubert, J., & Houdková (2018). Effect of nozzle geometry on the microstructure and properties of hvaf-sprayed wc-10co4cr and cr3c2-25nicr coatings. Journal of Thermal Spray Technology, 27(4), 680-694. https://doi.org/10.1007/s11666-018-0717-z

Habib, M., Rashed, A. R., Ozbay, E., & Caglayan, H. (2018). Graphene-based tunable plasmon induced transparency in gold strips. Optical Materials Express, 8(4), 1069-1074. https://doi.org/10.1364/OME.8.001069, https://doi.org/10.1364/OME.8.001069

Ruuskanen, J., Stenvall, A., Van Nugteren, J., & Lahtinen, V. (2018). Optimization of an E3SPreSSO Energy-Extraction System for High-Field Superconducting Magnets. IEEE Transactions on Applied Superconductivity, 28(3), [4700805]. https://doi.org/10.1109/TASC.2018.2794457

Koivusalo, L., Karvinen, J., Sorsa, E., Jönkkäri, I., Väliaho, J., Kallio, P., ... Kellomäki, M. (2018). Hydrazone crosslinked hyaluronan-based hydrogels for therapeutic delivery of adipose stem cells to treat corneal defects. Materials Science and Engineering C, 85, 68-78. https://doi.org/10.1016/j.msec.2017.12.013

Rossi, L., Badel, A., Bajas, H., Bajko, M., Ballarino, A., Barth, C., ... Zangenberg, N. (2018). The EuCARD2 Future Magnets Program for particle accelerator high field dipoles: review of results and next steps. IEEE Transactions on Applied Superconductivity, 28(3). https://doi.org/10.1109/TASC.2017.2784357

Raunio, J-P., Löyttyniemi, T., & Ritala, R. (2018). Online quality evaluation of tissue paper structure on new generation tissue machines. Nordic Pulp and Paper Research Journal, 33(1), 133-141. https://doi.org/10.1515/npprj-2018-3004

Sassatelli, P., Bolelli, G., Lassinantti Gualtieri, M., Heinonen, E., Honkanen, M., Lusvarghi, L., ... Vippola, M. (2018). Properties of HVOF-sprayed Stellite-6 coatings. Surface and Coatings Technology, 338, 45-62. https://doi.org/10.1016/j.surfcoat.2018.01.078

Poutanen, M., Ahmed, Z., Rautkari, L., Ikkala, O., & Priimägi, A. (2018). Thermal Isomerization of Hydroxyazobenzenes as a Platform for Vapor Sensing. ACS Macro Letters, 7(3), 381-386. https://doi.org/10.1021/acsmacrolett.8b00093

Janka, L., Berger, L. M., Norpoth, J., Trache, R., Thiele, S., Tomastik, C., ... Vuoristo, P. (2018). Improving the high temperature abrasion resistance of thermally sprayed Cr3C2-NiCr coatings by WC addition. Surface and Coatings Technology, 337, 296-305. https://doi.org/10.1016/j.surfcoat.2018.01.035

Kulig, W., Mikkolainen, H., Olżyńska, A., Jurkiewicz, P., Cwiklik, L., Hof, M., ... Rog, T. (2018). Bobbing of Oxysterols: Molecular Mechanism for Translocation of Tail-Oxidized Sterols through Biological Membranes. Journal of Physical Chemistry Letters, 9(5), 1118-1123. https://doi.org/10.1021/acs.jpclett.8b00211

Bhagavatheswaran, E. S., Vaikuntam, S. R., Stöckelhuber, K. W., Wießner, S., Heinrich, G., & Das, A. (2018). High-performance elastomeric strain sensors based on nanostructured carbon fillers for potential tire applications. Materials Today Communications, 14, 240-248. https://doi.org/10.1016/j.mtcomm.2018.01.013

Karvinen, J., Joki, T., Ylä-Outinen, L., Koivisto, J. T., Narkilahti, S., & Kellomäki, M. (2018). Soft hydrazone crosslinked hyaluronan- and alginate-based hydrogels as 3D supportive matrices for human pluripotent stem cell-derived neuronal cells. Reactive and Functional Polymers, 124, 29-39. https://doi.org/10.1016/j.reactfunctpolym.2017.12.019

Hannula, M., Ali-Löytty, H., Lahtonen, K., Sarlin, E., Saari, J., & Valden, M. (2018). Improved Stability of Atomic Layer Deposited Amorphous TiO2 Photoelectrode Coatings by Thermally Induced Oxygen Defects. Chemistry of Materials, 30(4), 1199-1208. https://doi.org/10.1021/acs.chemmater.7b02938

Kainulainen, T. P., Sirviö, J. A., Sethi, J., Hukka, T. I., & Heiskanen, J. P. (2018). UV-Blocking Synthetic Biopolymer from Biomass-Based Bifuran Diester and Ethylene Glycol. Macromolecules, 51(5), 1822-1829. https://doi.org/10.1021/acs.macromol.7b02457

Vaikuntam, S. R., Stöckelhuber, K. W., Subramani Bhagavatheswaran, E., Wießner, S., Scheler, U., Saalwächter, K., ... Das, A. (2018). Entrapped Styrene Butadiene Polymer Chains by Sol-Gel-Derived Silica Nanoparticles with Hierarchical Raspberry Structures. Journal of Physical Chemistry B, 122(6), 2010-2022. https://doi.org/10.1021/acs.jpcb.7b11792

Yury, K., Filippov, M., Makarov, A., Malygina, I., Soboleva, N., Fantozzi, D., ... Vuoristo, P. (2018). Arc-sprayed Fe-based coatings from coredwires for wear and corrosion protection in power engineering. Coatings, 8(2), [71]. https://doi.org/10.3390/coatings8020071

Fedele, C., Netti, P. A., & Cavalli, S. (2018). Azobenzene-based polymers: Emerging applications as cell culture platforms. Biomaterials Science, 6(5), 990-995. https://doi.org/10.1039/c8bm00019k

Barreca, D., Carraro, G., Maccato, C., Altantzis, T., Kaunisto, K., & Gasparotto, A. (2018). Controlled Growth of Supported ZnO Inverted Nanopyramids with Downward Pointing Tips. Crystal Growth and Design, 18(4), 2579-2587. https://doi.org/10.1021/acs.cgd.8b00198

Das, A., Sallat, A., Böhme, F., Sarlin, E., Vuorinen, J., Vennemann, N., ... Stöckelhuber, K. W. (2018). Temperature scanning stress relaxation of an autonomous self-healing elastomer containing non-covalent reversible network junctions. Polymers, 10(1), [94]. https://doi.org/10.3390/polym10010094

Pennacchio, F. A., Fedele, C., De Martino, S., Cavalli, S., Vecchione, R., & Netti, P. A. (2018). Three-Dimensional Microstructured Azobenzene-Containing Gelatin as a Photoactuable Cell Confining System. ACS Applied Materials and Interfaces, 10(1), 91-97. https://doi.org/10.1021/acsami.7b13176

Lopez-Iscoa, P., Pugliese, D., Boetti, N. G., Janner, D., Baldi, G., Petit, L., & Milanese, D. (2018). Design, synthesis, and structure-property relationships of Er3+ -doped TiO2 luminescent particles synthesized by sol-gel. Nanomaterials, 8(1), [20]. https://doi.org/10.3390/nano8010020

Katkovnik, V., Shevkunov, I., Petrov, N. V., & Eguiazarian, K. (2018). Multiwavelength surface contouring from phase-coded diffraction patterns. In Unconventional Optical Imaging 2018. Strasbourg, France (Vol. 10677). [106771B] (Proceedings of SPIE - The International Society for Optical Engineering; Vol. 10677). SPIE. https://doi.org/10.1117/12.2306127

Saccone, M., Kuntze, K., Ahmed, Z., Siiskonen, A., Giese, M., & Priimagi, A. (2018). Ortho-Fluorination of azophenols increases the mesophase stability of photoresponsive hydrogen-bonded liquid crystals. Journal of Materials Chemistry C, 6(37), 9958-9963. https://doi.org/10.1039/c8tc02611d

Suokas, E., & Kuusipalo, J. (2018). Process time importance in the product properties evolvement during extrusion coating of different LDPE grades. In 15th TAPPI Advanced Coating Fundamentals Symposium 2018: Charlotte; United States; 14 April 2018 through 15 April 2018 (pp. 151-159). TAPPI Press.

Zhao, Y., Wang, Y., Zhang, X., Mateos, X., Pan, Z., Loiko, P., ... Petrov, V. (2018). Sub-100 fs pulse generation from a Tm,Ho: CALYO laser mode-locked by a GaSb-based SESAM at ~2043 nm. In CLEO: Science and Innovations, CLEO_SI 2018 OSA - The Optical Society. https://doi.org/10.1364/CLEO_SI.2018.SF2N.1

Noronen, T., Fedotov, A., Rissanen, J., Gumenyuk, R., Butov, O., Chamorovskii, Y., ... Filippov, V. (2018). Ultra-large mode area single frequency anisotropic MOPA with double clad Yb-doped tapered fiber. In Fiber Lasers XV: Technology and Systems [105121T] (Proceedings of SPIE; Vol. 10512). SPIE, IEEE. https://doi.org/10.1117/12.2288942

Murtomaeki, J. S., Kirby, G., van Nugteren, J., Contat, P. A., Fleiter, J., De Frutos, O. S., ... Wolf, F. (2018). 10 kA Joints for HTS Roebel Cables. IEEE Transactions on Applied Superconductivity, 28(3). https://doi.org/10.1109/TASC.2018.2804951

Voronin, V., Pismenskova, M., Zelensky, A., Cen, Y., Nadykto, A., & Egiazarian, K. (2018). Action recognition using the 3D dense microblock difference. In Counterterrorism, Crime Fighting, Forensics, and Surveillance Technologies II [108020O] (Proceedings of SPIE; Vol. 10802). SPIE. https://doi.org/10.1117/12.2326801

Kerst, T., & Toivonen, J. (2018). Alpha radiation induced luminescence in solar blind spectral region. In CLEO: Applications and Technology, CLEO_AT 2018 OSA - The Optical Society. https://doi.org/10.1364/CLEO_AT.2018.ATh4O.8

Rajan, D. K., Kreutzer, J., Välimäki, H., Pekkanen-Mattila, M., Ahola, A., Skogberg, A., ... Lekkala, J. (2018). A portable live-cell imaging system with an invert-upright-convertible architecture and a mini-bioreactor for long-term simultaneous cell imaging, chemical sensing and electrophysiological recording. IEEE Access, 6. https://doi.org/10.1109/ACCESS.2018.2804378

Glorieux, B., Salminen, T., Massera, J., Lastusaari, M., & Petit, L. (2018). Better understanding of the role of SiO2, P2O5 and Al2O3 on the spectroscopic properties of Yb3+ doped silica sol-gel glasses. Journal of Non-Crystalline Solids, 482, 46-51. https://doi.org/10.1016/j.jnoncrysol.2017.12.021

Ojansivu, M., Wang, X., Hyväri, L., Kellomäki, M., Hupa, L., Vanhatupa, S., & Miettinen, S. (2018). Bioactive glass induced osteogenic differentiation of human adipose stem cells is dependent on cell attachment mechanism and mitogen-activated protein kinases. European Cells and Materials, 35, 53-71. https://doi.org/10.22203/eCM.v035a05

Orell, O., Vuorinen, J., Jokinen, J., Kettunen, H., Hytönen, P., Turunen, J., & Kanerva, M. (2018). Characterization of elastic constants of anisotropic composites in compression using digital image correlation. Composite Structures, 185, 176-185. https://doi.org/10.1016/j.compstruct.2017.11.008

Amanatidis, S., Ntziachristos, L., Karjalainen, P., Saukko, E., Simonen, P., Kuittinen, N., ... Keskinen, J. (2018). Comparative performance of a thermal denuder and a catalytic stripper in sampling laboratory and marine exhaust aerosols. Aerosol Science and Technology, 52(4), 1-13. https://doi.org/10.1080/02786826.2017.1422236

Saarimaa, V., Kaleva, A., Paunikallio, T., Nikkanen, J-P., Heinonen, S., Levänen, E., ... Markkula, A. (2018). Convenient extraction method for quantification of thin zinc patina layers. Surface and Interface Analysis, 50(5), 564-570. https://doi.org/10.1002/sia.6429

Ojha, N., Nguyen, H., Laihinen, T., Salminen, T., Lastusaari, M., & Petit, L. (2018). Decomposition of persistent luminescent microparticles in corrosive phosphate glass melt. Corrosion Science, 135, 207-214. https://doi.org/10.1016/j.corsci.2018.02.050

Maule, M., Moltchanov, D., Kustarev, P., Komarov, M., Andreev, S., & Koucheryavy, Y. (2018). Delivering Fairness and QoS Guarantees for LTE/Wi-Fi Coexistence under LAA Operation. IEEE Access, 6. https://doi.org/10.1109/ACCESS.2018.2793941

Lorin, C., Simon, D., Felice, H., Rifflet, J. M., Salmi, T., & Schoerling, D. (2018). Design of a Nb3Sn 400 T/m quadrupole for the Future Circular Collider. IEEE Transactions on Applied Superconductivity, 28(3), [4004905]. https://doi.org/10.1109/TASC.2018.2797945

Fang, C. Y., Vallini, F., Amili, A. E., Tukiainen, A., Lyytikäinen, J., Guina, M., & Fainman, Y. (2018). Development of efficient electrically pumped nanolasers based on InAlGaAs tunnel junction. In CLEO: Science and Innovations, CLEO_SI 2018 OSA - The Optical Society. https://doi.org/10.1364/CLEO_SI.2018.SW4Q.4

Perumbilavil, S., Piccardi, A., Kauranen, M., & Assanto, G. (2018). Directional random laser by combining cavity-less lasing and spatial solitons in liquid crystals. In Nonlinear Photonics, NP 2018 (Vol. Part F108-NP 2018). OSA - The Optical Society. https://doi.org/10.1364/NP.2018.NpW2C.4

Ali, S., Orell, O., Kanerva, M., & Hannula, S. P. (2018). Effect of Morphology and Crystal Structure on the Thermal Conductivity of Titania Nanotubes. Nanoscale Research Letters, 13, [212]. https://doi.org/10.1186/s11671-018-2613-3

Järvinen, H., Honkanen, M., Järvenpää, M., & Peura, P. (2018). Effect of paint baking treatment on the properties of press hardened boron steels. Journal of Materials Processing Technology, 252, 90-104. https://doi.org/10.1016/j.jmatprotec.2017.08.027

Durandin, N. A., Isokuortti, J., Efimov, A., Vuorimaa-Laukkanen, E., Tkachenko, N. V., & Laaksonen, T. (2018). Efficient photon upconversion at remarkably low annihilator concentrations in a liquid polymer matrix: when less is more. Chemical Communications, 54(99), 14029-14032. https://doi.org/10.1039/c8cc07592a

Assanto, G., Perumbilavil, S., Piccardi, A., & Kauranen, M. (2018). Electro-optic steering of random laser emission in liquid crystals. Photonics Letters of Poland, 10(4), 103-105. https://doi.org/10.4302/plp.v10i4.852

Vuorinen, E., Heino, V., Ojala, N., Haiko, O., & Hedayati, A. (2018). Erosive-abrasive wear behavior of carbide-free bainitic and boron steels compared in simulated field conditions. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 232(1), 3-13. https://doi.org/10.1177/1350650117739125

Poutala, A., Kovanen, T., & Kettunen, L. (2018). Essential Measurements for Finite Element Simulations of Magnetostrictive Materials. IEEE Transactions on Magnetics, 54(1), [7200107]. https://doi.org/10.1109/TMAG.2017.2766599

Kiilakoski, J., Musalek, R., Lukac, F., Koivuluoto, H., & Vuoristo, P. (2018). Evaluating the toughness of APS and HVOF-sprayed Al2O3-ZrO2-coatings by in-situ- and macroscopic bending. Journal of the European Ceramic Society, 38(4), 1908-1918. https://doi.org/10.1016/j.jeurceramsoc.2017.11.056

Grosu, M. C., Lupu, I. G., Cramariuc, O., & Hogas, H. I. (2018). Fabrication and characterization of magnetic cotton yarns for textile applications. Journal of the Textile Institute, 109(10), 1348-1359. https://doi.org/10.1080/00405000.2018.1423935

Rostedt, A., & Keskinen, J. (2018). Flow rate-independent electrical aerosol sensor. Aerosol Science and Technology, 52(11), 1283-1292. https://doi.org/10.1080/02786826.2018.1498586

Kantola, E., Penttinen, J-P., Leinonen, T., Ranta, S., & Guina, M. (2018). Frequency-doubled VECSEL employing a Volume Bragg Grating for linewidth narrowing. In CLEO: Applications and Technology, CLEO_AT 2018 OSA - The Optical Society. https://doi.org/10.1364/CLEO_AT.2018.JTu2A.17

Kantola, E., Leinonen, T., Rantamäki, A., Guina, M., Sirbu, A., & Iakovlev, V. (2018). Frequency-doubled wafer-fused 638 nm VECSEL with an output power of 5.6 W. In CLEO: Applications and Technology, CLEO_AT 2018 OSA - The Optical Society. https://doi.org/10.1364/CLEO_AT.2018.JTu2A.10

Mateos, X., Loiko, P., Lamrini, S., Scholle, K., Fuhrberg, P., Suomalainen, S., ... Petrov, V. (2018). Highly-efficient Ho:KY(WO4)2 thin-disk lasers at 2.06 μm. In Pacific-Rim Laser Damage 2018: Optical Materials for High-Power Lasers [107130J] (Proceedings of SPIE; Vol. 10713). SPIE, IEEE. https://doi.org/10.1117/12.2316822

Zia, N., Viheriälä, J., Koivusalo, E., Aho, A., Suomalainen, S., & Guina, M. (2018). High performance GaSb superluminescent diodes for tunable light source at 2 μm and 2.55 μm. In CLEO: Applications and Technology, CLEO_AT 2018 OSA - The Optical Society. https://doi.org/10.1364/CLEO_AT.2018.JTu2A.28

Shakun, A., Poikelispää, M., Das, A., & Vuorinen, J. (2018). Improved electromechanical response in acrylic rubber by different carbon-based fillers. Polymer Engineering and Science, 58(3), 395-404. https://doi.org/10.1002/pen.24586

Karioja, P., Alajoki, T., Cherchi, M., Ollila, J., Harjanne, M., Heinilehto, N., ... Kalinowski, P. (2018). Integrated multi-wavelength mid-IR light source for gas sensing. In Next-Generation Spectroscopic Technologies XI [106570A] (SPIE Conference Proceedings; Vol. 10657). SPIE, IEEE. https://doi.org/10.1117/12.2305712

Vinha, J., Salminen, M., Salminen, K., Kalamees, T., Kurnitski, J., & Kiviste, M. (2018). Internal moisture excess of residential buildings in Finland. Journal of Building Physics, 42(3), 239-258. https://doi.org/10.1177/1744259117750369

Wirdatmadja, S., Johari, P., Balasubramaniam, S., Bae, Y., Stachowiak, M. K., & Jornet, J. M. (2018). Light propagation analysis in nervous tissue for wireless optogenetic nanonetworks. In Optogenetics and Optical Manipulation 2018 [104820R] SPIE. https://doi.org/10.1117/12.2288786

Zeng, H., Wasylczyk, P., Wiersma, D. S., & Priimagi, A. (2018). Light Robots: Bridging the Gap between Microrobotics and Photomechanics in Soft Materials. Advanced Materials, 30(24), [1703554]. https://doi.org/10.1002/adma.201703554

Cappelluti, F., Kim, D., van Eerden, M., Cédola, A. P., Aho, T., Bissels, G., ... Guina, M. (2018). Light-trapping enhanced thin-film III-V quantum dot solar cells fabricated by epitaxial lift-off. Solar Energy Materials and Solar Cells, 181, 83-92. https://doi.org/10.1016/j.solmat.2017.12.014

Toral, F., Munilla, J., & Salmi, T. (2018). Magnetic and mechanical design of a 16 T common coil dipole for FCC. IEEE Transactions on Applied Superconductivity, 28(3), [4004305]. https://doi.org/10.1109/TASC.2018.2797909

Rajan, R., Rainosalo, E., Thomas, S. P., Ramamoorthy, S. K., Zavašnik, J., Vuorinen, J., & Skrifvars, M. (2018). Modification of epoxy resin by silane-coupling agent to improve tensile properties of viscose fabric composites. Polymer Bulletin, 75(1), 167–195. https://doi.org/10.1007/s00289-017-2022-2

Virtanen, H., Uusitalo, T., Karjalainen, M., Ranta, S., Viheriala, J., & Dumitrescu, M. (2018). Narrow-linewidth 780 nm DFB lasers fabricated using nanoimprint lithography. IEEE Photonics Technology Letters, 30(1), 51-54. https://doi.org/10.1109/LPT.2017.2772337

Kaneda, Y., Hart, M. L., Warner, S. H., Penttinen, J. P., & Guina, M. (2018). Narrow-linewidth operation of folded VECSEL cavity with twist-mode configuration. In Advanced Solid State Lasers, ASSL 2018 (Optics InfoBase Conference Papers; Vol. Part F121-ASSL 2018). OSA - The Optical Society. https://doi.org/10.1364/ASSL.2018.ATh2A.7

Koivuluoto, H., Matikainen, V., Larjo, J., & Vuoristo, P. (2018). Novel Online Diagnostic Analysis for In-Flight Particle Properties in Cold Spraying. Journal of Thermal Spray Technology, 27(3), 423–432. https://doi.org/10.1007/s11666-018-0685-3

Stenvall, A., & Lahtinen, V. (2018). Open Material Property Library With Native Simulation Tool Integrations - MASTO. IEEE Transactions on Applied Superconductivity. https://doi.org/10.1109/TASC.2018.2799850

Marshoud, H., Sofotasios, P. C., Muhaidat, S., Sharif, B. S., & Karagiannidis, G. K. (2018). Optical Adaptive Precoding for Visible Light Communications. IEEE Access, 6, 22121-22130. https://doi.org/10.1109/ACCESS.2018.2805939

Selim, B., Muhaidat, S., Sofotasios, P. C., Sharif, B. S., Stouraitis, T., Karagiannidis, G. K., & Al-Dhahir, N. (2018). Performance Analysis of Non-Orthogonal Multiple Access under I/Q Imbalance. IEEE Access, 6, 18453 - 18468. https://doi.org/10.1109/ACCESS.2018.2820074

Saarinen, M., Nommeots-Nomm, A., Hokka, M., Laurila, J., Norrbo, I., Lastusaari, M., ... Petit, L. (2018). Persistent luminescent particles containing bioactive glasses: Prospect toward tracking in-vivo implant mineralization using biophotonic ceramics. Journal of the European Ceramic Society, 38(1), 287-295. https://doi.org/10.1016/j.jeurceramsoc.2017.08.024

Wani, O. M., Zeng, H., Wasylczyk, P., & Priimagi, A. (2018). Programming Photoresponse in Liquid Crystal Polymer Actuators with Laser Projector. Advanced Optical Materials, 6(1), [1700949]. https://doi.org/10.1002/adom.201700949

Ryczkowski, P., Närhi, M., Billet, C., Merolla, J. M., Genty, G., & Dudley, J. M. (2018). Real-time full-field characterization of transient dissipative soliton dynamics in a mode-locked laser. Nature Photonics, 12, 221–227. https://doi.org/10.1038/s41566-018-0106-7

Ryczkowski, P., Närhi, M., Billet, C., Merolla, J. M., Dudley, J. M., & Genty, G. (2018). Real-time measurements of nonlinear instabilities in optical fibers. In CLEO: Applications and Technology, CLEO_AT 2018 OSA - The Optical Society. https://doi.org/10.1364/CLEO_AT.2018.AF2Q.1

Sulonen, M. L. K., Kokko, M. E., Lakaniemi, A-M., & Puhakka, J. A. (2018). Simultaneous removal of tetrathionate and copper from simulated acidic mining water in bioelectrochemical and electrochemical systems. Unpublished. https://doi.org/10.1016/j.hydromet.2018.01.023

Hu, J., Mawst, L., Moss, S., Petit, L., & Ting, D. (Eds.) (2018). Special Issue: Mid-infrared optical materials and their device applications. Optical Materials Express, 8(7).

Alekseev, A., Ihalainen, P., Ivanov, A., Domnin, I., Rosqvist, E., Lemmetyinen, H., ... Vyaz'min, S. (2018). Stable blue phase polymeric Langmuir-Schaefer films based on unsymmetrical hydroxyalkadiynyl N-arylcarbamate derivatives. Thin Solid Films, 645, 108-118. https://doi.org/10.1016/j.tsf.2017.10.018

Nikkinen, J., Savitski, V., Reilly, S., Dziechciarczyk, L., Härkönen, A., Kemp, A., & Guina, M. (2018). Sub-100 ps monolithic diamond Raman laser emitting at 573 nm. IEEE Photonics Technology Letters, 30(11), 981-984. https://doi.org/10.1109/LPT.2018.2806183

Tomberg, T., Vainio, M., Hieta, T., & Halonen, L. (2018). Sub-parts-per-trillion sensitivity in trace gas detection by cantilever-enhanced photo-acoustic spectroscopy. In CLEO: Applications and Technology, CLEO_AT 2018 OSA - The Optical Society. https://doi.org/10.1364/CLEO_AT.2018.ATh1O.8

Vapaavuori, J., Bazuin, C. G., & Priimagi, A. (2018). Supramolecular design principles for efficient photoresponsive polymer-azobenzene complexes. Journal of Materials Chemistry C, 6(9), 2168-2188. https://doi.org/10.1039/c7tc05005d

Achimova, E., Abaskin, V., Cazac, V., Meshalkin, A., Pedrini, G., Claus, D., ... Katkovnik, V. (2018). Surface topography studied by off-axis digital holography. In Novel Optical Materials and Applications, NOMA 2018 (Vol. Part F107-NOMA 2018). OSA - The Optical Society. https://doi.org/10.1364/NOMA.2018.NoW1J.7

Bolelli, G., Bursi, M., Lusvarghi, L., Manfredini, T., Matikainen, V., Rigon, R., ... Vuoristo, P. (2018). Tribology of FeVCrC coatings deposited by HVOF and HVAF thermal spray processes. Wear, 394-395, 113-133. https://doi.org/10.1016/j.wear.2017.10.014

Teisala, H., Geyer, F., Haapanen, J., Juuti, P., Mäkelä, J. M., Vollmer, D., & Butt, H. J. (2018). Ultrafast Processing of Hierarchical Nanotexture for a Transparent Superamphiphobic Coating with Extremely Low Roll-Off Angle and High Impalement Pressure. Advanced Materials, 30(14), [1706529]. https://doi.org/10.1002/adma.201706529

Saarimaa, V., Kaleva, A., Nikkanen, J-P., Heinonen, S., Levänen, E., Väisänen, P., ... Juhanoja, J. (2017). Supercritical carbon dioxide treatment of hot dip galvanized steel as a surface treatment before coating. Surface and Coatings Technology, 331, 137-142. https://doi.org/10.1016/j.surfcoat.2017.10.047

Lisitsyna, E. S., Ketola, T-M., Morin-Picardat, E., Liang, H., Hanzlíková, M., Urtti, A., ... Vuorimaa-Laukkanen, E. (2017). Time-Resolved Fluorescence Spectroscopy Reveals Fine Structure and Dynamics of Poly(l-lysine) and Polyethylenimine Based DNA Polyplexes. Journal of Physical Chemistry B, 121(48), 10782-10792. https://doi.org/10.1021/acs.jpcb.7b08394

Garifullin, M., Pajunen, S., Mela, K., Heinisuo, M., & Havula, J. (2017). Initial in-plane rotational stiffness of welded RHS T joints with axial force in main member. Journal of Constructional Steel Research, 139, 353-362. https://doi.org/10.1016/j.jcsr.2017.09.033

Santangelo, P. E., Allesina, G., Bolelli, G., Lusvarghi, L., Matikainen, V., & Vuoristo, P. (2017). Infrared Thermography as a Non-destructive Testing Solution for Thermal Spray Metal Coatings. Journal of Thermal Spray Technology, 26(8), 1982–1993. https://doi.org/10.1007/s11666-017-0642-6

Tuukkanen, S. (2017). Nanocellulose as a renewable piezoelectric sensor material.

Sarlin, E., Saarimäki, M., Sironen, R., Lindgren, M., Siljander, S., Kanerva, M., & Vuorinen, J. (2017). Erosive wear of filled vinylester composites in water and acidic media at elevated temperature. Wear, 390-391, 84-92. https://doi.org/10.1016/j.wear.2017.07.011

Ropo, M., Akola, J., & Jones, R. O. (2017). Crystallization of supercooled liquid antimony: A density functional study. Physical Review B, 96(18), [184102]. https://doi.org/10.1103/PhysRevB.96.184102

Fedele, C., De Gregorio, M., Netti, P. A., Cavalli, S., & Attanasio, C. (2017). Azopolymer photopatterning for directional control of angiogenesis. Acta Biomaterialia, 63, 317-325. https://doi.org/10.1016/j.actbio.2017.09.022

Nikkinen, J., Härkönen, A., Leino, I., & Guina, M. (2017). Generation of Sub-100 ps Pulses at 532, 355, and 266 nm Using a SESAM Q-Switched Microchip Laser. IEEE Photonics Technology Letters, 29(21), 1816-1819. https://doi.org/10.1109/LPT.2017.2752421

Holmberg, K., Kivikytö-Reponen, P., Härkisaari, P., Valtonen, K., & Erdemir, A. (2017). Global energy consumption due to friction and wear in the mining industry. Tribology International, 115, 116-139. https://doi.org/10.1016/j.triboint.2017.05.010

Bhavitha, K. B., Nair, A. K., Perumbilavil, S., Joseph, S., Kala, M. S., Saha, A., ... Kalarikkal, N. (2017). Investigating solvent effects on aggregation behaviour, linear and nonlinear optical properties of silver nanoclusters. Optical Materials, 73, 695-705. https://doi.org/10.1016/j.optmat.2017.09.024

Layek, R. K., Uddin, M. E., Kim, N. H., Tak Lau, A. K., & Lee, J. H. (2017). Noncovalent functionalization of reduced graphene oxide with pluronic F127 and its nanocomposites with gum arabic. Composites Part B : Engineering, 128, 155-163. https://doi.org/10.1016/j.compositesb.2017.07.010

Jisha, C. P., & Alberucci, A. (2017). Paraxial light beams in structured anisotropic media. Journal of the Optical Society of America A: Optics and Image Science, and Vision, 34(11), 2019-2024. https://doi.org/10.1364/JOSAA.34.002019

Sethi, J., Sarlin, E., Meysami, S. S., Suihkonen, R., Santha Kumar, A. R. S., Honkanen, M., ... Vuorinen, J. (2017). The effect of multi-wall carbon nanotube morphology on electrical and mechanical properties of polyurethane nanocomposites. Composites Part A: Applied Science and Manufacturing, 102, 305-313. https://doi.org/10.1016/j.compositesa.2017.08.014

Brobbey, K. J., Haapanen, J., Gunell, M., Mäkelä, J. M., Eerola, E., Toivakka, M., & Saarinen, J. J. (2017). One-step flame synthesis of silver nanoparticles for roll-to-roll production of antibacterial paper. Applied Surface Science, 420, 558-565. https://doi.org/10.1016/j.apsusc.2017.05.143

Virtanen, J., & Tuukkanen, S. (2017). Multi-material bio-printing facilities. Paper presented at BMT and MED Research Day 2017, Tampere, Finland.

Valtonen, K., Ratia, V., Ojala, N., & Kuokkala, V-T. (2017). Comparison of laboratory wear test results with the in-service performance of cutting edges of loader buckets. Wear, 388-389, 93-100. https://doi.org/10.1016/j.wear.2017.06.005

Boardman, A. D., Alberucci, A., Assanto, G., Grimalsky, V. V., Kibler, B., McNiff, J., ... Valagiannopoulos, C. A. (2017). Waves in hyperbolic and double negative metamaterials including rogues and solitons. Nanotechnology, 28(44), [444001]. https://doi.org/10.1088/1361-6528/aa6792

Saari, J. (2017). Atomikerroskasvatusmenetelmällä kasvatetun titaanidioksidikalvon ominaisuudet valosähkökemiallisessa veden hajottamisessa.

Välimäki, H., Verho, J., Kreutzer, J., Kattipparambil Rajan, D., Ryynänen, T., Pekkanen-Mattila, M., ... Lekkala, J. (2017). Fluorimetric oxygen sensor with an efficient optical read-out for in vitro cell models. Sensors and Actuators B: Chemical, 249, 738-746. https://doi.org/10.1016/j.snb.2017.04.182

Nguyen, H., Tuomisto, M., Oksa, J., Salminen, T., Lastusaari, M., & Petit, L. (2017). Upconversion in low rare-earth concentrated phosphate glasses using direct NaYF4: Er3 +, Yb3 + nanoparticles doping. Scripta Materialia, 139, 130-133. https://doi.org/10.1016/j.scriptamat.2017.06.050

Heinonen, S., Nikkanen, J-P., Huttunen-Saarivirta, E., & Levänen, E. (2017). Investigation of long-term chemical stability of structured ZnO films in aqueous solutions of varying conditions. Thin Solid Films, 638, 410-419. https://doi.org/10.1016/j.tsf.2017.07.055

Isakov, M., Matikainen, V., Koivuluoto, H., & May, M. (2017). Systematic analysis of coating-substrate interactions in the presence of flow localization. Surface and Coatings Technology, 324, 264-280. https://doi.org/10.1016/j.surfcoat.2017.05.040

Tkalich, D., Li, C. C., Kane, A., Saai, A., Tkalich, D., Yastrebov, V. A., ... From, A. (2017). Wear of cemented tungsten carbide percussive drill–bit inserts: Laboratory and field study. Wear, 386-387, 106-117. https://doi.org/10.1016/j.wear.2017.05.010

Javanainen, M., Martinez-Seara, H., Metzler, R., & Vattulainen, I. (2017). Diffusion of Integral Membrane Proteins in Protein-Rich Membranes. Journal of Physical Chemistry Letters, 8(17), 4308-4313. https://doi.org/10.1021/acs.jpclett.7b01758

Petit, L., Nguyen, H., Hongisto, M., Salminen, T., Hakkarainen, T., Lopez-Iscoa, P., ... Milanese, D. (2017). Novel Er3+ doped phosphate glass-ceramics for photonics. In ICTON 2017 - 19th International Conference on Transparent Optical Networks IEEE COMPUTER SOCIETY PRESS. https://doi.org/10.1109/ICTON.2017.8024877

Laurila, M. M., Khorramdel, B., Dastpak, A., & Mäntysalo, M. (2017). Statistical analysis of E-jet print parameter effects on Ag-nanoparticle ink droplet size. Journal of Micromechanics and Microengineering, 27(9), [095005]. https://doi.org/10.1088/1361-6439/aa7a71

Virjula, S., Zhao, F., Leivo, J., Vanhatupa, S., Kreutzer, J., Vaughan, T. J., ... Miettinen, S. (2017). The effect of equiaxial stretching on the osteogenic differentiation and mechanical properties of human adipose stem cells. Journal of the Mechanical Behavior of Biomedical Materials, 72, 38-48. https://doi.org/10.1016/j.jmbbm.2017.04.016

Matikainen, V., Bolelli, G., Koivuluoto, H., Honkanen, M., Vippola, M., Lusvarghi, L., & Vuoristo, P. (2017). A Study of Cr3C2-Based HVOF- and HVAF-Sprayed Coatings: Microstructure and Carbide Retention. Journal of Thermal Spray Technology, 26(6), 1-18. https://doi.org/10.1007/s11666-017-0578-x

Pippola, J., Marttila, T., & Frisk, L. (2017). Development of dust test method for motor drives. In 2017 IMAPS Nordic Conference on Microelectronics Packaging, NordPac 2017 (pp. 43-46). IEEE. https://doi.org/10.1109/NORDPAC.2017.7993161

Katkovnik, V., Shevkunov, I., Petrov, N. V., & Egiazarian, K. (2017). Computational super-resolution phase retrieval from multiple phase-coded diffraction patterns: Simulation study and experiments. Optica, 4(7), 786-794. https://doi.org/10.1364/OPTICA.4.000786

Rahaman, O., Kalimeri, M., Katava, M., Paciaroni, A., & Sterpone, F. (2017). Configurational Disorder of Water Hydrogen-Bond Network at the Protein Dynamical Transition. Journal of Physical Chemistry Part B, 121(28), 6792-6798. https://doi.org/10.1021/acs.jpcb.7b03888

Poikelispää, M., Shakun, A., Sarlin, E., Das, A., & Vuorinen, J. (2017). Vegetable fillers for electric stimuli responsive elastomers. Journal of Applied Polymer Science, 134(28), [45081]. https://doi.org/10.1002/app.45081

Palola, S., Sarlin, E., Kolahgar Azari, S., Koutsos, V., & Vuorinen, J. (2017). Microwave induced hierarchical nanostructures on aramid fibers and their influence on adhesion properties in a rubber matrix. Applied Surface Science, 410, 145-153. https://doi.org/10.1016/j.apsusc.2017.03.070

Kaleva, A., Saarimaa, V., Heinonen, S., Nikkanen, J-P., Markkula, A., Väisänen, P., & Levänen, E. (2017). Dissolution-induced nanowire synthesis on hot-dip galvanized surface in supercritical carbon dioxide. Nanomaterials, 7(7), [181]. https://doi.org/10.3390/nano7070181

Antin, K. N., & Pärnänen, T. (2017). Democratizing composites manufacturing -inexpensive tooling empowers new players. SAMPE Journal, 53(4), 6-10.

Kotilainen, M., Krumpolec, R., Franta, D., Souček, P., Homola, T., Cameron, D. C., & Vuoristo, P. (2017). Hafnium oxide thin films as a barrier against copper diffusion in solar absorbers. Solar Energy Materials and Solar Cells, 166, 140-146. https://doi.org/10.1016/j.solmat.2017.02.033

Karvinen, J., Koivisto, J. T., Jönkkäri, I., & Kellomäki, M. (2017). The production of injectable hydrazone crosslinked gellan gum-hyaluronan-hydrogels with tunable mechanical and physical properties. Journal of the Mechanical Behavior of Biomedical Materials, 71, 383-391. https://doi.org/10.1016/j.jmbbm.2017.04.006

Luna, E., Puustinen, J., Wu, M., Hilska, J., Guina, M., & Trampert, A. (2017). The role of epitaxial strain on the spontaneous formation of Bi-rich nanostructures in Ga(As,Bi) epilayers and quantum wells. Nanoscience and Nanotechnology Letters, 9(7), 1132-1138. https://doi.org/10.1166/nnl.2017.2448

Baek, J., Umeyama, T., Stranius, K., Yamada, H., Tkachenko, N. V., & Imahori, H. (2017). Long-Range Observation of Exciplex Formation and Decay Mediated by One-Dimensional Bridges. Journal of Physical Chemistry C, 121(25), 13952-13961. https://doi.org/10.1021/acs.jpcc.7b04483

Amariei, N., Manea, L. R., Bertea, A. P., Cramariuc, R., Bertea, A., & Cramariuc, O. (2017). Electrospinning Polyaniline for Sensors. In International Conference on Innovative Research - ICIR Euroinvent 2017 25–26 May 2017, Iasi, Romania ( IOP Conference Series: Materials Science and Engineering; Vol. 209). IOP Publishing. https://doi.org/10.1088/1757-899X/209/1/012091

Rozemarie, M. L., Andrei, B., Liliana, H., Cramariuc, R., & Cramariuc, O. (2017). Electrospun Based Polyaniline Sensors - A Review. In International Conference on Innovative Research - ICIR Euroinvent 2017 25–26 May 2017, Iasi, Romania (IOP Conference Series: Materials Science and Engineering; Vol. 209). IOP Publishing. https://doi.org/10.1088/1757-899X/209/1/012063

Moilanen, C., Björkqvist, T., Ovaska, M., Koivisto, J., Miksic, A., Engberg, B. A., ... Alava, M. (2017). Influence of strain rate, temperature and fatigue on the radial compression behaviour of Norway spruce. Holzforschung, 71(6), 505-514. https://doi.org/10.1515/hf-2016-0144

Böttrich, M., Tanskanen, J. M. A., & Hyttinen, J. A. K. (2017). Lead field theory provides a powerful tool for designing microelectrode array impedance measurements for biological cell detection and observation. BioMedical Engineering Online, 16(1), [85]. https://doi.org/10.1186/s12938-017-0372-5

Ahmed, U., Harju, J., Poutala, J., Ruuskanen, P., Rasilo, P., & Kouhia, R. (2017). Finite element method incorporating coupled magneto-elastic model for magneto-mechanical energy harvester. Paper presented at Compumag 2017, Daejeon, Korea, Democratic People's Republic of.

Kiilakoski, J., Lukac, F., Koivuluoto, H., & Vuoristo, P. (2017). Cavitation wear characteristics of Al2O3-ZrO2-ceramic coatings deposited by APS and HVOF -processes. In Internationl Thermal Spray Conference ITSC 2017, Conference Proceedings: June 7-9, 2017, Düsseldorf, Germany. (Vol. 336, pp. 928-933). (DVS-Berichte / DVS - Deutscher Verband für Schweißen und Verwandte Verfahren e.V.). Düsseldorf: DVS Media GmbH.

Putaala, J., Niittynen, J., Hannu, J., Myllymäki, S., Kunnari, E., Mäntysalo, M., ... Jantunen, H. (2017). Capability assessment of inkjet printing for reliable RFID applications. IEEE Transactions on Device and Materials Reliability, 17(2), 281-290. https://doi.org/10.1109/TDMR.2016.2636342

Railanmaa, A., Lehtimäki, S., & Lupo, D. (2017). Comparison of starch and gelatin hydrogels for non-toxic supercapacitor electrolytes. Applied Physics A-Materials Science and Processing, 123(6), [459]. https://doi.org/10.1007/s00339-017-1068-1

Schoerling, D., Durante, M., Lorin, C., Martinez, T., Ruuskanen, J., Salmi, T., ... Toral, F. (2017). Considerations on a Cost Model for High-Field Dipole Arc Magnets for FCC. IEEE Transactions on Applied Superconductivity, 27(4), [4003105]. https://doi.org/10.1109/TASC.2017.2657510

Stoykova, E., Berberova, N., Kim, Y., Nazarova, D., Ivanov, B., Gotchev, A., ... Kang, H. (2017). Dynamic speckle analysis with smoothed intensity-based activity maps. Optics and Lasers in Engineering, 93, 55-65. https://doi.org/10.1016/j.optlaseng.2017.01.012

Annila, P. J., Hellemaa, M., Pakkala, T. A., Lahdensivu, J., Suonketo, J., & Pentti, M. (2017). Extent of moisture and mould damage in structures of public buildings. Case Studies in Construction Materials, 6, 103-108. https://doi.org/10.1016/j.cscm.2017.01.003

Kirby, G. A., Van Nugteren, J., Bajas, H., Benda, V., Ballarino, A., Bajko, M., ... Usoskin, A. (2017). First Cold Powering Test of REBCO Roebel Wound Coil for the EuCARD2 Future Magnet Development Project. IEEE Transactions on Applied Superconductivity, 27(4), [4003307]. https://doi.org/10.1109/TASC.2017.2653204

Murtomaki, J. S., Van Nugteren, J., Kirby, G., Rossi, L., Ruuskanen, J., & Stenvall, A. (2017). Mechanical Effects of the Nonuniform Current Distribution on HTS Coils for Accelerators Wound With REBCO Roebel Cable. IEEE Transactions on Applied Superconductivity, 27(4), [4100405]. https://doi.org/10.1109/TASC.2017.2665882

Marinozzi, V., Bellomo, G., Caiffi, B., Fabbricatore, P., Farinon, S., Salmi, T., ... Volpini, G. (2017). Quench Protection Study of the Eurocircol 16 T cosθ Dipole for the Future Circular Collider (FCC). IEEE Transactions on Applied Superconductivity, 27(4), [4702505]. https://doi.org/10.1109/TASC.2017.2656156

Salmi, T., Prioli, M., Stenvall, A., Ruuskanen, J., Verweij, A. P., Auchmann, B., & Marinozzi, V. (2017). Suitability of Different Quench Protection Methods for a 16 T Block-Type Nb3Sn Accelerator Dipole Magnet. IEEE Transactions on Applied Superconductivity, 27(4), [4702305]. https://doi.org/10.1109/TASC.2017.2651386

Tommasini, D., Auchmann, B., Bajas, H., Bajko, M., Ballarino, A., Bellomo, G., ... Wolf, F. (2017). The 16 T Dipole Development Program for FCC. IEEE Transactions on Applied Superconductivity, 27(4), [4000405]. https://doi.org/10.1109/TASC.2016.2634600

Ma, L., Laasonen, K., & Akola, J. (2017). Catalytic Activity of AuCu Clusters on MgO(100): Effect of Alloy Composition for CO Oxidation. Journal of Physical Chemistry C, 121(20), 10876-10886. https://doi.org/10.1021/acs.jpcc.6b12054

Goh, J-Q., Akola, J., & Ferrando, R. (2017). Geometric Structure and Chemical Ordering of Large AuCu Clusters: A Computational Study. Journal of Physical Chemistry C, 121(20), 10809-10816. https://doi.org/10.1021/acs.jpcc.6b11958

Piccardi, A., Alberucci, A., Kravets, N., Buchnev, O., & Assanto, G. (2017). Nematicon-enhanced spontaneous symmetry breaking. Molecular Crystals and Liquid Crystals, 649(1), 59-65. https://doi.org/10.1080/15421406.2017.1303916

He, H., Akbari, M., Chen, X., Nommeots-Nomm, A., Chen, L., Ukkonen, L., & Virkki, J. (2017). Fabrication and performance evaluation of 3D-printed graphene passive UHF RFID tags on cardboard. In 2017 Progress in Electromagnetics Research Symposium - Spring, PIERS 2017 (pp. 3322-3325). IEEE. https://doi.org/10.1109/PIERS.2017.8262330

Chen, X., He, H., Chen, L., Raumonen, P., Ukkonen, L., & Virkki, J. (2017). Two-part stretchable passive UHF RFID textile tags. In 2017 Progress in Electromagnetics Research Symposium - Spring, PIERS 2017 (pp. 3318-3321). Electromagnetics Academy. https://doi.org/10.1109/PIERS.2017.8262329

Golda-Cepa, M., Kulig, W., Cwiklik, L., & Kotarba, A. (2017). Molecular Dynamics Insights into Water-Parylene C Interface: Relevance of Oxygen Plasma Treatment for Biocompatibility. ACS Applied Materials and Interfaces, 9(19), 16685-16693. https://doi.org/10.1021/acsami.7b03265

Sarlin, E., Sironen, R., Pärnänen, T., Lindgren, M., Kanerva, M., & Vuorinen, J. (2017). The effect of matrix type on ageing of thick vinyl ester glass-fibre-reinforced laminates. Composite Structures, 168, 840–850. https://doi.org/10.1016/j.compstruct.2017.02.086

Virkki, K., Hakola, H., Urbani, M., Tejerina, L., Ince, M., Martínez-Díaz, M. V., ... Tkachenko, N. V. (2017). Photoinduced Electron Injection from Zinc Phthalocyanines into Zinc Oxide Nanorods: Aggregation Effects. Journal of Physical Chemistry C, 121(17), 9594-9605. https://doi.org/10.1021/acs.jpcc.7b01562

Mentink, M., & Salmi, T. (2017). Quench absorption coils: A quench protection concept for high-field superconducting accelerator magnets. Superconductor Science and Technology, 30(6), [064002]. https://doi.org/10.1088/1361-6668/aa6678

Ojala, N. (2017). Application Oriented Wear Testing of Wear Resistant Steels in Mining Industry. (Tampere University of Technology. Publication; Vol. 1469). Tampere University of Technology.

Sankaran, S., Jaatinen, L., Brinkmann, J., Zambelli, T., Vörös, J., & Jonkheijm, P. (2017). Cell Adhesion on Dynamic Supramolecular Surfaces Probed by Fluid Force Microscopy-Based Single-Cell Force Spectroscopy. ACS Nano, 11(4), 3867-3874. https://doi.org/10.1021/acsnano.7b00161

Saccone, M., Siiskonen, A., Fernandez-Palacio, F., Priimägi, A., Terraneo, G., Resnati, G., & Metrangolo, P. (2017). Halogen bonding stabilizes a cis-azobenzene derivative in the solid state: A crystallographic study. ACTA CRYSTALLOGRAPHICA SECTION B : STRUCTURAL SCIENCE, CRYSTAL ENGINEERING AND MATERIALS, 73(2), 227-233. https://doi.org/10.1107/S2052520617003444

Koivisto, J. T., Joki, T., Parraga, J. E., Paakkönen, R., Yla-Outinen, L., Salonen, L., ... Kellomäki, M. (2017). Bioamine-crosslinked gellan gum hydrogel for neural tissue engineering. Biomedical Materials, 12(2), [025014]. https://doi.org/10.1088/1748-605X/aa62b0

Virtanen, H., Uusitalo, T., & Dumitrescu, M. (2017). Simulation studies of DFB laser longitudinal structures for narrow linewidth emission. Optical and Quantum Electronics, 49(4), [160]. https://doi.org/10.1007/s11082-017-0993-8

Lopez-Iscoa, P., Petit, L., Massera, J., Janner, D., Boetti, N. G., Pugliese, D., ... Milanese, D. (2017). Effect of the addition of Al2O3, TiO2 and ZnO on the thermal, structural and luminescence properties of Er3+-doped phosphate glasses. Journal of Non-Crystalline Solids, 460, 161-168. https://doi.org/10.1016/j.jnoncrysol.2017.01.030

Milani, R., Houbenov, N., Fernandez-Palacio, F., Cavallo, G., Luzio, A., Haataja, J., ... Ikkala, O. (2017). Hierarchical Self-Assembly of Halogen-Bonded Block Copolymer Complexes into Upright Cylindrical Domains. CheM, 2(3), 417-426. https://doi.org/10.1016/j.chempr.2017.02.003

Rojas-Cervellera, V., Raich, L., Akola, J., & Rovira, C. (2017). The molecular mechanism of the ligand exchange reaction of an antibody against a glutathione-coated gold cluster. Nanoscale, 9(9), 3121-3127. https://doi.org/10.1039/c6nr08498b

Mashayekhi, M., Winchester, L., Laurila, M-M., Mäntysalo, M., Ogier, S., Terés, L., & Carrabina, J. (2017). Chip-by-chip configurable interconnection using digital printing techniques. Journal of Micromechanics and Microengineering, 27(4), [045009]. https://doi.org/10.1088/1361-6439/aa5ef3

Kuzmin, M., Lahtonen, K., Vuori, L., Sánchez-de-Armas, R., Hirsimäki, M., & Valden, M. (2017). Investigation of the structural anisotropy in a self-assembling glycinate layer on Cu(100) by scanning tunneling microscopy and density functional theory calculations. Applied Surface Science, 409, 111-116. https://doi.org/10.1016/j.apsusc.2017.03.005

Kosunen, M., Lemberg, J., Martelius, M., Roverato, E., Nieminen, T., Englund, M., ... Ryynänen, J. (2017). 13.5 A 0.35-to-2.6GHz multilevel outphasing transmitter with a digital interpolating phase modulator enabling up to 400MHz instantaneous bandwidth. In 2017 IEEE International Solid-State Circuits Conference, ISSCC 2017 (pp. 224-225). IEEE. https://doi.org/10.1109/ISSCC.2017.7870342

Polley, A., Orłowski, A., Danne, R., Gurtovenko, A. A., Bernardino de La Serna, J., Eggeling, C., ... Vattulainen, I. (2017). Glycosylation and Lipids Working in Concert Direct CD2 Ectodomain Orientation and Presentation. Journal of Physical Chemistry Letters, 8(5), 1060-1066. https://doi.org/10.1021/acs.jpclett.6b02824

Selim, B., Sofotasios, P. C., Muhaidat, S., & Karagiannidis, G. K. (2017). The effects of I/Q imbalance on wireless communications: A survey. In 2016 IEEE 59th International Midwest Symposium on Circuits and Systems (MWSCAS) IEEE. https://doi.org/10.1109/MWSCAS.2016.7870102

Laurila, M-M., Khorramdel, B., & Mäntysalo, M. (2017). Combination of E-jet and inkjet printing for additive fabrication of multilayer high-density RDL of silicon interposer. IEEE Transactions on Electron Devices, 64(3), 1217-1224. https://doi.org/10.1109/TED.2016.2644728

Lappalainen, K., & Valkealahti, S. (2017). Effects of PV array layout, electrical configuration and geographic orientation on mismatch losses caused by moving clouds. Solar Energy, 144, 548-555. https://doi.org/10.1016/j.solener.2017.01.066

Karhu, M., Lagerbom, J., Kivikytö-Reponen, P., Ismailov, A., & Levänen, E. (2017). Reaction heat utilization in aluminosilicate-based ceramics synthesis and sintering. Journal of Ceramic Science and Technology, 8(1), 101-112. https://doi.org/10.4416/JCST2016-00094

Valtonen, K. (2017). Materiaaleja haastaviin kulumisolosuhteisiin. Materia, (1), 50.

Heinonen, S., Nikkanen, J. P., Kaleva, A., Hyvärinen, L., & Levänen, E. (2017). Structured ZnO films: Effect of copper nitrate addition to precursor solution on topography, band gap energy and photocatalytic activity. IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING, 175(1), [012042]. https://doi.org/10.1088/1757-899X/175/1/012042

Kaleva, A., Heinonen, S., Nikkanen, J. P., & Levänen, E. (2017). Synthesis and crystallization of titanium dioxide in supercritical carbon dioxide (scCO2). IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING, 175(1), [012034]. https://doi.org/10.1088/1757-899X/175/1/012034

Ruuskanen, J., Stenvall, A., Lahtinen, V., & Pardo, E. (2017). Electromagnetic nonlinearities in a Roebel-cable-based accelerator magnet prototype: Variational approach. Superconductor Science and Technology, 30(2), [024008]. https://doi.org/10.1088/1361-6668/30/2/024008

Pavelescu, E. M., Bălţăţeanu, N., Spânulescu, S. I., & Arola, E. (2017). Very high dose electron irradiation effects on photoluminescence from GaInNAs/GaAs quantum wells grown by molecular beam epitaxy. Optical Materials, 64, 361-365. https://doi.org/10.1016/j.optmat.2016.12.007

Köliö, A., Pakkala, T. A., Hohti, H., Laukkarinen, A., Lahdensivu, J., Mattila, J., & Pentti, M. (2017). The corrosion rate in reinforced concrete facades exposed to outdoor environment. Materials and Structures, 50(23). https://doi.org/10.1617/s11527-016-0920-7

Magarkar, A., Jurkiewicz, P., Allolio, C., Hof, M., & Jungwirth, P. (2017). Increased Binding of Calcium Ions at Positively Curved Phospholipid Membranes. Journal of Physical Chemistry Letters, 8(2), 518-523. https://doi.org/10.1021/acs.jpclett.6b02818

Natarajan, T. S., Eshwaran, S. B., Stöckelhuber, K. W., Wießner, S., Pötschke, P., Heinrich, G., & Das, A. (2017). Strong Strain Sensing Performance of Natural Rubber Nanocomposites. ACS Applied Materials and Interfaces, 9(5), 4860-4872. https://doi.org/10.1021/acsami.6b13074

Kovács, P. T., Zare, A., Balogh, T., Bregovic, R., & Gotchev, A. (2017). Architectures and codecs for real-time light field streaming. Journal of Imaging Science and Technology, 61(1), [010403]. https://doi.org/10.2352/J.ImagingSci.Technol.2017.61.1.010403

Matikainen, V., Rubio, S., Ojala, N., Koivuluoto, H., Schubert, J., Houdková, S., & Vuoristo, P. (2017). Cavitation erosion, slurry erosion and solid particle erosion performance of metal matrix composite (MMC) coatings sprayed with modern high velocity thermal spray processes. In Materials Science and Technology Conference and Exhibition 2017, MS and T 2017: October 8-12, 2017, Pittsburgh, Pennsylvania USA (Vol. 2, pp. 1161-1163). Association for Iron and Steel Technology, AISTECH.

Morantes, S. J., Buitrago, D. M., Ibla, J. F., García, Y. M., Lafaurie, G. I., & Parraga, J. E. (2017). Composites of hydrogels and nanoparticles: A potential solution to current challenges in buccal drug delivery. In Biopolymer-Based Composites: Drug Delivery and Biomedical Applications (pp. 107-138). Woodhead Publishing. https://doi.org/10.1016/B978-0-08-101914-6.00005-3

Casula, R., Penttinen, J. P., Guina, M., Kemp, A. J., & Hastie, J. E. (2017). Continuous-wave, cascaded raman laser at 1.3, 1.5, and 1.7 μm. In The European Conference on Lasers and Electro-Optics, CLEO_Europe 2017 (Optics InfoBase Conference Papers; Vol. Part F82-CLEO_Europe 2017). OSA - The Optical Society.

Suokas, E. (2017). Effect of air gap on the adhesion of PET layer on cardboard substrate in extrusion coating. In 16th TAPPI European PLACE Conference 2017 (pp. 529-544). TAPPI Press.

Lahti, J., Kamppuri, T., & Kuusipalo, J. (2017). Novel bio-based materials for active and intelligent packaging. In 16th TAPPI European PLACE Conference 2017 TAPPI Press.

Lahti, J., Kuusipalo, J., & Auvinen, S. (2017). Novel equipment to simulate hot air heat sealability of packaging materials. In 16th TAPPI European PLACE Conference 2017 (pp. 237-248). TAPPI Press.

Kuusipalo, J., & Lahti, J. (2017). Tampere University of Technology, laboratory of materials science, paper converting and packaging technology Tampere, Finland. In 16th TAPPI European PLACE Conference 2017: Basel; Switzerland; 22 May 2017 through 24 May 2017 (Vol. May-2017). TAPPI Press.

Isotahdon, E., Huttunen-Saarivirta, E., & Kuokkala, V. (2017). Characterization of the microstructure and corrosion performance of Ce-alloyed Nd-Fe-B magnets. Journal of Alloys and Compounds, 692, 190-197. https://doi.org/10.1016/j.jallcom.2016.09.058

Poikelispää, M., Shakun, A., Das, A., & Vuorinen, J. (2017). High actuation performance offered by simple diene rubbers. Polymers for Advanced Technologies, 28(1), 130-136. https://doi.org/10.1002/pat.3867

Viheriälä, J., Aho, A., Virtanen, H., Dumitrescu, M., & Guina, M. (2017). 1180 nm GaInNAs quantum well based high power DBR laser diodes. Paper presented at SPIE Photonics West 2017, San Francisco, United States.

Sarjas, H., Surzhenkov, A., Juhani, K., Antonov, M., Adoberg, E., Kulu, P., ... Vuoristo, P. (2017). Abrasive-Erosive Wear of Thermally Sprayed Coatings from Experimental and Commercial Cr3C2-Based Powders. Journal of Thermal Spray Technology, 26(8), 2020–2029. https://doi.org/10.1007/s11666-017-0638-2

Hyysalo, A., Ristola, M., Joki, T., Honkanen, M., Vippola, M., & Narkilahti, S. (2017). Aligned Poly(ε-caprolactone) Nanofibers Guide the Orientation and Migration of Human Pluripotent Stem Cell-Derived Neurons, Astrocytes, and Oligodendrocyte Precursor Cells In Vitro. MACROMOLECULAR BIOSCIENCE, 17(7), [1600517]. https://doi.org/10.1002/mabi.201600517

Filippov, V., Noronen, T., Gumenyuk, R., Chamorovskii, Y., Golant, K., & Odnoblyudov, M. (2017). Anisotropic ultra-large mode area Yb-doped tapered double clad fiber for ultrafast amplifiers. In Advanced Solid State Lasers 2017: Nagoya, Aichi Japan 1–5 October 2017 (Vol. Part F75-ASSL 2017). [JTu2A.51] The Optical Society; OSA. https://doi.org/10.1364/ASSL.2017.JTu2A.51

Mal, J., Nancharaiah, Y. V., Bera, S., Maheshwari, N., Van Hullebusch, E. D., & Lens, P. N. L. (2017). Biosynthesis of CdSe nanoparticles by anaerobic granular sludge. Environmental Science: Nano, 4(4), 824-833. https://doi.org/10.1039/c6en00623j

Katkovnik, V., Shevkunov, I., Petrov, N. V., & Egiazarian, K. (2017). Computational wavelength resolution for in-line lensless holography: Phase-coded diffraction patterns and wavefront group-sparsity. In Digital Optical Technologies 2017 [1033509] (Proceedings of SPIE; Vol. 10335). SPIE. https://doi.org/10.1117/12.2269327

Fabert, M., Ojha, N., Erasmus, E., Hannula, M., Hokka, M., Hyttinen, J., ... Massera, J. (2017). Crystallization and sintering of borosilicate bioactive glasses for application in tissue engineering. Journal of Materials Chemistry B, 5(23), 4514-4525. https://doi.org/10.1039/c7tb00106a

Härkäsalmi, T., Lehmonen, J., Itälä, J., Peralta, C., Siljander, S., & Ketoja, J. A. (2017). Design-driven integrated development of technical and perceptual qualities in foam-formed cellulose fibre materials. Cellulose, 24(11), 5053–5068. https://doi.org/10.1007/s10570-017-1484-6

Kordmahaleh, A. A., Naghashzadegan, M., Javaherdeh, K., & Khoshgoftar, M. (2017). Design of a 25 MWe Solar Thermal Power Plant in Iran with Using Parabolic Trough Collectors and a Two-Tank Molten Salt Storage System. International Journal of Photoenergy, 2017, [4210184]. https://doi.org/10.1155/2017/4210184

Arffman, A., Juuti, P., Harra, J., & Keskinen, J. (2017). Differential diffusion analyzer. Aerosol Science and Technology, 51(12), 1429-1437. https://doi.org/10.1080/02786826.2017.1367089

Wang, X., Fagerlund, S., Massera, J., Södergård, B., & Hupa, L. (2017). Do properties of bioactive glasses exhibit mixed alkali behavior? Journal of Materials Science, 52(15), 8986–8997. https://doi.org/10.1007/s10853-017-0915-y

Stoykova, E., Nazarova, D., Berberova, N., Gotchev, A., Ivanov, B., & Mateev, G. (2017). Dynamic laser speckle metrology with binarization of speckle patterns. In 19th International Conference and School on Quantum Electronics: Laser Physics and Applications [102260R] (Proceedings of SPIE; Vol. 10226). SPIE. https://doi.org/10.1117/12.2262330

Ojala, N., Valtonen, K., Minkkinen, J., & Kuokkala, V-T. (2017). Edge and particle embedment effects in low- and high-stress slurry erosion wear of steels and elastomers. Wear, 388-389, 126-135. https://doi.org/10.1016/j.wear.2017.06.004

Haiko, O., Miettunen, I., Porter, D., Ojala, N., Ratia, V., Heino, V., & Kemppainen, A. (2017). Effect of finish rolling and quench stop temperatures on impact-abrasive wear resistance of 0.35 % carbon direct-quenched steel. Tribologia, 35(1-2), 5-21.

Khorramdel, B., Torkkeli, A., & Mäntysalo, M. (2017). Electrical Contacts in SOI MEMS Using Aerosol Jet Printing. IEEE Journal of the Electron Devices Society, 6, 34-40. https://doi.org/10.1109/JEDS.2017.2764498

Bomberg, M., Miettinen, H., Wahlström, M., Kaartinen, T., Ahoranta, S., Lakaniemi, A-M., & Kinnunen, P. (2017). Evaluation of long-term post process inactivation of bioleaching microorganisms. In 22nd International Biohydrometallurgy Symposium (pp. 57-60). (Solid State Phenomena; Vol. 262 SSP). Trans Tech Publications Ltd. https://doi.org/10.4028/www.scientific.net/SSP.262.57

Markova, E., Gudkova, I., Ometov, A., Dzantiev, I., Andreev, S., Koucheryavy, Y., & Samouylov, K. (2017). Flexible Spectrum Management in a Smart City within Licensed Shared Access Framework. IEEE Access, 5, 22252-22261. https://doi.org/10.1109/ACCESS.2017.2758840

Mojica, E., Pertuz, S., & Arguello, H. (2017). High-resolution coded-aperture design for compressive X-ray tomography using low resolution detectors. Optics Communications, 404, 103-109. https://doi.org/10.1016/j.optcom.2017.06.053

Janka, L., Norpoth, J., Trache, R., Thiele, S., & Berger, L. M. (2017). HVOF- and HVAF-Sprayed Cr3C2-NiCr Coatings Deposited from Feedstock Powders of Spherical Morphology: Microstructure Formation and High-Stress Abrasive Wear Resistance Up to 800 °C. Journal of Thermal Spray Technology, 26(7), 1720–1731. https://doi.org/10.1007/s11666-017-0621-y

Vuori, L., Ali-Löytty, H., Lahtonen, K., Hannula, M., Lehtonen, E., Niu, Y., & Valden, M. (2017). Improved corrosion properties of Hot Dip Galvanized Steel by nanomolecular silane layers as hybrid interface between zinc and top coatings. Corrosion, 73(2). https://doi.org/10.5006/2206

Mäkelä, J. M., Haapanen, J., Harra, J., Juuti, P., & Kujanpää, S. (2017). Liquid flame spray—a hydrogen-oxygen flame based method for nanoparticle synthesis and functional nanocoatings. KONA POWDER AND PARTICLE JOURNAL, 2017(34), 141-154. https://doi.org/10.14356/kona.2017020

Oksanen, V. T., Lehtovaara, A. J., & Kallio, M. H. (2017). Load capacity of lubricated bismuth bronze bimetal bearing under elliptical sliding motion. Wear, 388-389, 72-80. https://doi.org/10.1016/j.wear.2017.05.001

Zhao, J., Stenvall, A., Salmi, T., Gao, Y., & Lorin, C. (2017). Mechanical behavior of a 16 T FCC dipole magnet during a quench. IEEE Transactions on Applied Superconductivity, 27(6), [4004407]. https://doi.org/10.1109/TASC.2017.2721974

Ometov, A., Levina, A., Borisenko, P., Mostovoy, R., Orsino, A., & Andreev, S. (2017). Mobile Social Networking under Side-Channel Attacks: Practical Security Challenges. IEEE Access, 5, 2591-2601. https://doi.org/10.1109/ACCESS.2017.2665640

Ometov, A., Sopin, E., Gudkova, I., Andreev, S., Gaidamaka, Y., & Koucheryavy, Y. (2017). Modeling Unreliable Operation of mmWave-based Data Sessions in Mission-Critical PPDR Services. IEEE Access, 5, 20536-20544. https://doi.org/10.1109/ACCESS.2017.2756690

Gumenyuk, R., Rissanen, J., Korobko, D. A., Zolotovskiy, I. O., Melkumov, M., & Khopin, V. F. (2017). New multisoliton complex in Bi-doped fiber laser operated at 1450 nm. In European Quantum Electronics Conference 2017 (Vol. Part F81-EQEC 2017). [EF_5_4] The Optical Society; OSA.

Salpavaara, T., Hänninen, A., Antniemi, A., Lekkala, J., & Kellomäki, M. (2017). Non-destructive and wireless monitoring of biodegradable polymers. Sensors and Actuators B: Chemical, 251, 1018-1025. https://doi.org/10.1016/j.snb.2017.05.116

Lindroos, M., Laukkanen, A., Cailletaud, G., & Kuokkala, V-T. (2017). On the effect of deformation twinning and microstructure to strain hardening of high manganese austenitic steel 3D microstructure aggregates at large strains. International Journal of Solids and Structures, 125, 68-76. https://doi.org/10.1016/j.ijsolstr.2017.07.015

Lampio, K., & Karvinen, R. (2017). Optimization of convectively cooled heat sinks. Microelectronics Reliability, 79, 473-479. https://doi.org/10.1016/j.microrel.2017.06.011

Taddeo, R., Prajapati, S., & Lepistö, R. (2017). Optimizing ammonium adsorption on natural zeolite for wastewaters with high loads of ammonium and solids. Journal of Porous Materials, 24(6), 1545–1554. https://doi.org/10.1007/s10934-017-0394-1

Karjalainen, P., Saari, S., Kuuluvainen, H., Kalliohaka, T., Taipale, A., & Rönkkö, T. (2017). Performance of ventilation filtration technologies on characteristic traffic related aerosol down to nanocluster size. Aerosol Science and Technology, 51(12), 1398-1408. https://doi.org/10.1080/02786826.2017.1356904

Baek, J., Umeyama, T., Mizuno, S., Tkachenko, N. V., & Imahori, H. (2017). Photophysical properties of porphyrin dimer-single-walled carbon nanotube linked systems. Journal of Physical Chemistry C, 121(39). https://doi.org/10.1021/acs.jpcc.7b08594

Filippov, V., Vorotynskii, A., Noronen, T., Gumenyuk, R., Chamorovskii, Y., & Golant, K. (2017). Picosecond MOPA with ytterbium doped tapered double clad fiber. In Fiber Lasers XIV: Technology and Systems (Vol. 10083). [100831H] (Proceedings of SPIE; No. 10083). SPIE. https://doi.org/10.1117/12.2252006

Borges, L. R., Bakic, P. R., Foi, A., Maidment, A. D. A., & Vieira, M. A. C. (2017). Pipeline for effective denoising of digital mammography and digital breast tomosynthesis. In Medical Imaging 2017: Physics of Medical Imaging [1013206] (Progress in biomedical optics and imaging). SPIE. https://doi.org/10.1117/12.2255058

Vinha, J., & Kivioja, H. (Eds.) (2017). Rakennusfysiikka 2017. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut: 24.-26.10.2017, Tampere. Seminaarijulkaisu 5 - Osa 1. Tampere: Tampereen teknillinen yliopisto, Rakennustekniikka, Rakennusfysiikka.

Vinha, J., & Kivioja, H. (Eds.) (2017). Rakennusfysiikka 2017. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut: 24.-26.10.2017, Tampere. Seminaarijulkaisu 5 - Osa 2. Tampere: Tampereen teknillinen yliopisto, Rakennustekniikka, Rakennusfysiikka.

Chen, L., Thombre, S., Järvinen, K., Lohan, E. S., Alen-Savikko, A., Leppäkoski, H., ... Kuusniemi, H. (2017). Robustness, Security and Privacy in Location-Based Services for Future IoT: A Survey. IEEE Access, 5, 8956-8977. https://doi.org/10.1109/ACCESS.2017.2695525

Jain, R., Jordan, N., Tsushima, S., Hübner, R., Weiss, S., & Lens, P. N. L. (2017). Shape change of biogenic elemental selenium nanomaterials from nanospheres to nanorods decreases their colloidal stability. Environmental Science: Nano, 4(5), 1054-1063. https://doi.org/10.1039/c7en00145b

Matikainen, V., Bolelli, G., Koivuluoto, H., Sassatelli, P., Lusvarghi, L., & Vuoristo, P. (2017). Sliding wear behaviour of HVOF and HVAF sprayed Cr3C2-based coatings. Wear, 388-389, 57-71. https://doi.org/10.1016/j.wear.2017.04.001

Kolesnik, S., Sitbon, M., Lineykin, S., Batzelis, E., Papathanassiou, S., Suntio, T., & Kuperman, A. (2017). Solar Irradiation Independent Expression for Photovoltaic Generator Maximum Power Line. IEEE Journal of Photovoltaics, 7(5), 1416-1420. https://doi.org/10.1109/JPHOTOV.2017.2713404

Mathlouthi, M., Valkonen, A., Rzaigui, M., & Smirani, W. (2017). Structural characterization, spectroscopic, thermal, AC conductivity and dielectric properties and antimicrobial studies of (C8H12N)2[SnCl6]. PHASE TRANSITIONS, 90(4), 399-414. https://doi.org/10.1080/01411594.2016.1212194

Koivuluoto, H., Milanti, A., Bolelli, G., Latokartano, J., Marra, F., Pulci, G., ... Vuoristo, P. (2017). Structures and properties of laser-assisted cold-sprayed aluminum coatings. In THERMEC 2016 (Vol. 879, pp. 984-989). (Materials Science Forum; Vol. 879). Trans Tech Publications Ltd. https://doi.org/10.4028/www.scientific.net/MSF.879.984

Wang, Y., Jing, W., Loiko, P., Zhao, Y., Huang, H., Suomalainen, S., ... Petrov, V. (2017). Sub-10 optical-cycle mode-locked Tm:(Lu2/3Sc1/3)2O3 mixed ceramic laser at 2057 nm. In Advanced Solid State Lasers 2017: Nagoya, Aichi Japan 1–5 October 2017 [ATu6A.4] The Optical Society; OSA. https://doi.org/10.1364/ASSL.2017.ATu6A.4

Lahbib, I., Valkonen, A., Rzaigui, M., & Smirani, W. (2017). Synthesis, Structural Characterization, Hirshfeld Surface and Antioxidant Activity Analysis of a Novel Organic Cation Antimonate Complex. Journal of Cluster Science, 28(4), 2239–2252. https://doi.org/10.1007/s10876-017-1217-x

Petrov, V., Moltchanov, D., Komar, M., Antonov, A., Kustarev, P., Rakheja, S., & Koucheryavy, Y. (2017). Terahertz Band Intra-Chip Communications: Can Wireless Links Scale Modern x86 CPUs? IEEE Access, 5, 6095-6109. https://doi.org/10.1109/ACCESS.2017.2689077

Koivuluoto, H., & Kanerva, U. (2017). Termisellä ruiskutuksella monitoiminnallisia pinnoiteratkaisuja vaativiin teollisuuden käyttökohteisiin. Hitsaustekniikka, 1, 17-19.

Morandi, A., Ainslie, M. D., Grilli, F., & Stenvall, A. (2017). The 5th international workshop on numerical modelling of high temperature superconductors. Superconductor Science and Technology, 30(8), [080201]. https://doi.org/10.1088/1361-6668/aa7676

Mishra, A., Petit, L., Pihl, M., Andersson, M., Salminen, T., Rocherullé, J., & Massera, J. (2017). Thermal, structural and in vitro dissolution of antimicrobial copper-doped and slow resorbable iron-doped phosphate glasses. Journal of Materials Science, 52(15), 8957–8972. https://doi.org/10.1007/s10853-017-0805-3

Hintikka, J., Lehtovaara, A., & Mäntylä, A. (2017). Third Particle Ejection Effects on Wear with Quenched and Tempered Steel Fretting Contact. TRIBOLOGY TRANSACTIONS, 60(1), 70-78. https://doi.org/10.1080/10402004.2016.1146813

Laudyn, U. A., Kwaśny, M., Karpierz, M. A., & Assanto, G. (2017). Three-color vector nematicon. Photonics Letters of Poland, 9(2), 36-38. https://doi.org/10.4302/plp.v9i2.718

Javanainen, M., Melcrová, A., Magarkar, A., Jurkiewicz, P., Hof, M., Jungwirth, P., & Martinez-Seara, H. (2017). Two cations, two mechanisms: Interactions of sodium and calcium with zwitterionic lipid membranes. Chemical Communications, 53(39), 5380-5383. https://doi.org/10.1039/c7cc02208e

Noronen, T., Gumenyuk, R., Chamorovskii, Y., Golant, K., Odnoblyudov, M., & Filippov, V. (2017). Ultrafast picosecond MOPA with Yb-doped tapered double clad fiber. In The European Conference on Lasers and Electro-Optics 2017: Munich Germany 25–29 June 2017 (Vol. Part F82-CLEO_Europe 2017). [CJ_9_4] The Optical Society; OSA.

Tuominen, M., Teisala, H., Haapanen, J., Mäkelä, J. M., Honkanen, M., Vippola, M., ... Swerin, A. (2016). Superamphiphobic overhang structured coating on a biobased material. Applied Surface Science, 389, 135-143. https://doi.org/10.1016/j.apsusc.2016.05.095

Hannula, M. K., Lahtonen, K. T., Isotalo, T. J., Saari, J. S., & Valden, M. O. (2016). Thermal Modification of ALD Grown Titanium Oxide Ultra Thin Film for Photoanode Applications. Paper presented at Symposium on Future Prospects for Photonics, Tampere, Finland.

Assanto, G., & Smyth, N. F. (2016). Nonlinear guided waves: Preface. Journal of Nonlinear Optical Physics and Materials, 25(4), [1650041]. https://doi.org/10.1142/S0218863516500417

Kamppuri, T., Vehviläinen, M., Backfolk, K., & Heiskanen, I. (2016). Characterization of endoglucanase rich Trichoderma reesei cellulase mixtures and their effect on alkaline solubility of dissolving pulp. Cellulose, 23(6), 3901–3911. https://doi.org/10.1007/s10570-016-1055-2

Järveläinen, M., Kaleva, A., Kaitajärvi, A., Laakso, J., Kanerva, U., & Levänen, E. (2016). Compression curve analysis and compressive strength measurement of brittle granule beds in lieu of individual granule measurements. Particuology, 29, 60-68. https://doi.org/10.1016/j.partic.2015.10.006

Pammo, A., Schouten, M., Virtanen, J., & Tuukkanen, S. (2016). Biomaterials for Electronics. 1-1.

Lappalainen, K., & Valkealahti, S. (2016). Apparent velocity of shadow edges caused by moving clouds. Solar Energy, 138, 47-52. https://doi.org/10.1016/j.solener.2016.09.008

Carfora, D., Gironimo, G. D., Esposito, G., Huhtala, K., Määttä, T., Mäkinen, H., ... Mozzillo, R. (2016). Multicriteria selection in concept design of a divertor remote maintenance port in the EU DEMO reactor using an AHP participative approach. Fusion Engineering and Design, 112, 324-331. https://doi.org/10.1016/j.fusengdes.2016.08.023

Varis, T., Suhonen, T., Calonius, O., Čuban, J., & Pietola, M. (2016). Optimization of HVOF Cr3C2-NiCr coating for increased fatigue performance. Surface and Coatings Technology, 305, 123-131. https://doi.org/10.1016/j.surfcoat.2016.08.012

Poikelispää, M., Shakun, A., Das, A., & Vuorinen, J. (2016). Improvement of actuation performance of dielectric elastomers by barium titanate and carbon black fillers. Journal of Applied Polymer Science, 133(42), [44116]. https://doi.org/10.1002/app.44116

Acar, E., Peltonen, S., & Ruotsalainen, U. (2016). Adaptive multiresolution method for MAP reconstruction in electron tomography. Ultramicroscopy, 170, 24-34. https://doi.org/10.1016/j.ultramic.2016.08.002

Juoksukangas, J., Lehtovaara, A., & Mäntylä, A. (2016). Experimental and numerical investigation of fretting fatigue behavior in bolted joints. Tribology International, 103, 440-448. https://doi.org/10.1016/j.triboint.2016.07.021

Ojala, N. (2016). Application oriented wear testing of wear resistant steels in mining industry. Paper presented at DIMECC 9th Annual Seminar, Helsinki, Finland.

Neri, M., Pilotelli, M., Leppänen, P., Pentti, M., & Bani, S. (2016). Experimental and Computational Study of the Temperatures Field Around a Chimney Roof Penetration. Fire Technology, 52(6), 1799–1823. https://doi.org/10.1007/s10694-015-0540-8

Ali-Löytty, H., Hannula, M., Honkanen, M., Östman, K., Lahtonen, K., & Valden, M. (2016). Grain orientation dependent Nb-Ti microalloying mediated surface segregation on ferritic stainless steel. Corrosion Science, 112, 204-213. https://doi.org/10.1016/j.corsci.2016.07.024

Järvinen, H., Isakov, M., Nyyssönen, T., Järvenpää, M., & Peura, P. (2016). The effect of initial microstructure on the final properties of press hardened 22MnB5 steels. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing, 676, 109-120. https://doi.org/10.1016/j.msea.2016.08.096

Ärrälä, M., Hafiz, H., Mou, D., Wu, Y., Jiang, R., Riedemann, T., ... Lindroos, M. (2016). Laser angle-resolved photoemission as a probe of initial state kz dispersion, final-state band gaps, and spin texture of Dirac states in the Bi2 Te3 topological insulator. Physical Review B, 94(15), [155144]. https://doi.org/10.1103/PhysRevB.94.155144

Kalikka, J., Akola, J., & Jones, R. O. (2016). Crystallization processes in the phase change material Ge2 Sb2 Te5: Unbiased density functional/molecular dynamics simulations. Physical Review B, 94(13), [134105]. https://doi.org/10.1103/PhysRevB.94.134105

Lindgren, M., Siljander, S., Suihkonen, R., Pohjanne, P., & Vuorinen, J. (2016). Erosion–corrosion resistance of various stainless steel grades in high-temperature sulfuric acid solution. Wear, 364-365, 10-21. https://doi.org/10.1016/j.wear.2016.06.007

Will, O. M., Purcz, N., Chalaris, A., Heneweer, C., Boretius, S., Purcz, L., ... Tiwari, S. (2016). Increased survival rate by local release of diclofenac in a murine model of recurrent oral carcinoma. International Journal of Nanomedicine, 11, 5311-5321. https://doi.org/10.2147/IJN.S109199

Juoksukangas, J., Lehtovaara, A., & Mäntylä, A. (2016). A comparison of relative displacement fields between numerical predictions and experimental results in fretting contact. Proceedings of the institution of Mechanical Engineers Part J: Journal of Engineering Tribology, 230(10), 1273-1287. https://doi.org/10.1177/1350650116633573

Lappalainen, K., & Valkealahti, S. (2016). Analysis of shading periods caused by moving clouds. Solar Energy, 135, 188-196. https://doi.org/10.1016/j.solener.2016.05.050

Heinonen, S., Kannisto, M., Nikkanen, J-P., Huttunen-Saarivirta, E., Karp, M., & Levänen, E. (2016). Photocatalytic and antibacterial properties of ZnO films with different surface topographies on stainless steel substrate. Thin Solid Films, 616, 842-849. https://doi.org/10.1016/j.tsf.2016.10.002

Myllymäki, S., Putaala, J., Hannu, J., Kunnari, E., & Mäntysalo, M. (2016). RF measurements to pinpoint defects in inkjet-printed, thermally and mechanically stressed coplanar waveguides. Microelectronics Reliability, 65, 142-150. https://doi.org/10.1016/j.microrel.2016.08.021

Paajanen, A., Sonavane, Y., Ignasiak, D., Ketoja, J. A., Maloney, T., & Paavilainen, S. (2016). Atomistic molecular dynamics simulations on the interaction of TEMPO-oxidized cellulose nanofibrils in water. Cellulose, 23(6), 3449–3462. https://doi.org/10.1007/s10570-016-1076-x

Kylänpää, I., Cavaliere, F., Ziani, N. T., Sassetti, M., & Räsänen, E. (2016). Thermal effects on the Wigner localization and Friedel oscillations in many-electron nanowires. Physical Review B, 94(11), [115417]. https://doi.org/10.1103/PhysRevB.94.115417

Robison, A. D., Sun, S., Poyton, M. F., Johnson, G. A., Pellois, J. P., Jungwirth, P., ... Cremer, P. S. (2016). Polyarginine Interacts More Strongly and Cooperatively than Polylysine with Phospholipid Bilayers. Journal of Physical Chemistry Part B, 120(35), 9287-9296. https://doi.org/10.1021/acs.jpcb.6b05604

Pilehrood, M. K., Atashi, A., Sadeghi-Aliabadi, H., Nousiainen, P., & Harlin, A. (2016). 3D micro-nano structured hybrid scaffolds: An investigation into the role of nanofiber coating on viability, proliferation and differentiation of seeded mesenchymal stem cells. Journal Nanoscience and Nanotechnology, 16(9), 9000-9007. https://doi.org/10.1166/jnn.2016.12740

Lindgren, M., Santa-aho, S., & Vippola, M. (2016). Barkhausen noise response of three different welded duplex stainless steels. Insight, 58(9), 480-486. https://doi.org/10.1784/insi.2016.58.9.480

Varghese, O. P., Liu, J., Sundaram, K., Hilborn, J., & Podiyan Oommen, O. (2016). Chondroitin sulfate derived theranostic nanoparticles for targeted drug delivery. Biomaterials Science, 4(9), 1310-1313. https://doi.org/10.1039/c6bm00335d

Räisänen, V., Suuriniemi, S., & Kettunen, L. (2016). Generalized slip transformations and air-gap harmonics in field models of electrical machines. IEEE Transactions on Magnetics, 52(9), [8107708]. https://doi.org/10.1109/TMAG.2016.2561907

Akbari, M., Virkki, J., Sydänheimo, L., & Ukkonen, L. (2016). Toward Graphene-Based Passive UHF RFID Textile Tags: A Reliability Study. IEEE Transactions on Device and Materials Reliability, 16(3), 429-431. https://doi.org/10.1109/TDMR.2016.2582261

Lenk, K., Priwitzer, B., Ylä-Outinen, L., Tietz, L. H. B., Narkilahti, S., & Hyttinen, J. A. K. (2016). Simulation of developing human neuronal cell networks. BioMedical Engineering Online, 15(1), [105]. https://doi.org/10.1186/s12938-016-0226-6

Moltchanov, D., Antonov, A., Kluchev, A., Borunova, K., Kustarev, P., Petrov, V., ... Platunov, A. (2016). Statistical traffic properties and model inference for shared cache interface in multi-core CPUs. IEEE Access, 4, 4829-4839. https://doi.org/10.1109/ACCESS.2016.2603169

Blokhin, S. A., Bobrov, M. A., Blokhin, A. A., Kuzmenkov, A. G., Vasil'Ev, A. P., Maleev, N. A., ... Ustinov, V. M. (2016). 1.3 μm InAs quantum dot semiconductor disk laser. R317. Paper presented at 2016 International Conference Laser Optics, LO 2016, St. Petersburg, Russian Federation. https://doi.org/10.1109/LO.2016.7549727

Korobko, D. A., Okhotnikov, O. G., Sysoliatin, A. A., & Zolotovskii, I. O. (2016). Advanced scheme of amplifier similariton laser. R858. Paper presented at 2016 International Conference Laser Optics, LO 2016, St. Petersburg, Russian Federation. https://doi.org/10.1109/LO.2016.7549889

Ustimchik, V. E., Vyatkin, M. Y., Popov, S. M., Chamorovskii, Y. K., Filippov, V. N., & Nikitov, S. A. (2016). State of polarization in anisotronic tapered fiber with extremely large core diameter. S123. Paper presented at 2016 International Conference Laser Optics, LO 2016, St. Petersburg, Russian Federation. https://doi.org/10.1109/LO.2016.7549956

Stöckelhuber, K. W., Das, A., & Klüppel, M. (Eds.) (2016). Designing of Elastomer Nanocomposites: From Theory to Application. (Advances in Polymer Science; Vol. 275). Springer International Publishing. https://doi.org/10.1007/978-3-319-47696-4

Basu, D., Das, A., Stöckelhuber, K. W., & Wießner, S. (2016). Nanostructured Ionomeric Elastomers. In K. W. Stöckelhuber, A. Das, & M. Klüppel (Eds.), Designing of Elastomer Nanocomposites: From Theory to Applications (pp. 235-266). (Advances in Polymer Science; Vol. 275). Springer International Publishing. https://doi.org/10.1007/12_2016_8

Dumitrescu, M., Uusitalo, T., Virtanen, H., Laakso, A., Bardella, P., & Montrosset, I. (2016). Simulation of photon-photon resonance enhanced direct modulation bandwidth of DFB lasers. In 16th International Conference on Numerical Simulation of Optoelectronic Devices, NUSOD 2016 (pp. 147-148). IEEE. https://doi.org/10.1109/NUSOD.2016.7547075

Virtanen, H., Uusitalo, T., & Dumitrescu, M. (2016). Simulation studies of DFB laser longitudinal structures for narrow linewidth emission. In 16th International Conference on Numerical Simulation of Optoelectronic Devices, NUSOD 2016 (pp. 153-154). IEEE. https://doi.org/10.1109/NUSOD.2016.7547078

Uusitalo, T., Virtanen, H., & Dumitrescu, M. (2016). Transverse structure optimization of laterally-coupled ridge waveguide DFB lasers. In 16th International Conference on Numerical Simulation of Optoelectronic Devices, NUSOD 2016 (pp. 79-80). [7547038] IEEE. https://doi.org/10.1109/NUSOD.2016.7547038

Mostofizadeh, M., Najari, M., Das, D., Pecht, M., & Frisk, L. (2016). Effect of Epoxy Flux Underfill on Thermal Cycling Reliability of Sn-8Zn-3Bi Lead-Free Solder in a Sensor Application. In Proceedings - ECTC 2016: 66th Electronic Components and Technology Conference (pp. 2169-2175). IEEE. https://doi.org/10.1109/ECTC.2016.209

Suikkola, J., Kankkunen, T., Iso-Ketola, P., Vanhala, J., & Mäntysalo, M. (2016). Screen-Printed Stretchable Interconnects. In Proceedings - ECTC 2016: 66th Electronic Components and Technology Conference (pp. 1650-1655). IEEE. https://doi.org/10.1109/ECTC.2016.132