Dongho-Nguimdo, G. M. et al. "First principles prediction of the solar cell efficiency of chalcopyrite materials AgMX 2 (M=In, Al; X=S, Se, Te)". Computational Condensed Matter. 2019. 21. https://doi.org/10.1016/j.cocom.2019.e00391

Lemougna, Patrick N. et al. "Recycling lithium mine tailings in the production of low temperature (700–900 °C) ceramics: Effect of ladle slag and sodium compounds on the processing and final properties". Construction and building materials. 2019, 221. 332-344. https://doi.org/10.1016/j.conbuildmat.2019.06.078

Mäntyranta, Aino et al. "Tribocorrosion behaviour of two low-alloy steel grades in simulated waste solution". Tribology International. 2019, 138. 250-262. https://doi.org/10.1016/j.triboint.2019.05.032

Bączkiewicz, Jolanta et al. "Parametric study on temperature distribution of square hollow section joints". Journal of Constructional Steel Research. 2019, 160. 490-498. https://doi.org/10.1016/j.jcsr.2019.05.049

Calejo, M. Teresa et al. "Porous polybutylene succinate films enabling adhesion of human embryonic stem cell-derived retinal pigment epithelial cells (hESC-RPE)". European Polymer Journal. 2019, 118. 78-87. https://doi.org/10.1016/j.eurpolymj.2019.05.041

Kiilakoski, J. et al. "Characterizing the micro-impact fatigue behavior of APS and HVOF-sprayed ceramic coatings". Surface and Coatings Technology. 2019, 371. 245-254. https://doi.org/10.1016/j.surfcoat.2018.10.097

Thomas, K. et al. "Elevated and cryogenic temperature micropillar compression of magnesium–niobium multilayer films". Journal of Materials Science. 2019, 54(15). 10884-10901. https://doi.org/10.1007/s10853-019-03422-x

Szczodra, A. et al. "Fluorine losses in Er 3+ oxyfluoride phosphate glasses and glass-ceramics". Journal of Alloys and Compounds. 2019, 797. 797-803. https://doi.org/10.1016/j.jallcom.2019.05.151

Murtomäki, Jaakko Samuel et al. "3-D mechanical modeling of 20 T HTS clover leaf end coils - Good practices and lessons learned". IEEE Transactions on Applied Superconductivity. 2019. 29(5). https://doi.org/10.1109/TASC.2019.2899317

Lorin, Clement et al. "Exploration of Two Layer Nb 3 Sn Designs of the Future Circular Collider Main Quadrupoles". IEEE Transactions on Applied Superconductivity. 2019. 29(5). https://doi.org/10.1109/TASC.2019.2892814

Hannula, M. et al. "Highly efficient charge separation in model Z-scheme TiO2/TiSi2/Si photoanode by micropatterned titanium silicide interlayer". Acta Materialia. 2019, 174. 237-245. https://doi.org/10.1016/j.actamat.2019.05.032

Matikainen, V. et al. "Erosion wear performance of WC-10Co4Cr and Cr 3 C 2 -25NiCr coatings sprayed with high-velocity thermal spray processes". Surface and Coatings Technology. 2019, 370. 196-212. https://doi.org/10.1016/j.surfcoat.2019.04.067

Jackson, T. et al. "An architectural understanding of natural sway frequencies in trees". Journal of the Royal Society. Interface. 2019. 16(155). https://doi.org/10.1098/rsif.2019.0116

Banerjee, Shib Shankar et al. "Water-Responsive and Mechanically Adaptive Natural Rubber Composites by in Situ Modification of Mineral Filler Structures". Journal of Physical Chemistry B. 2019, 123(24). 5168-5175. https://doi.org/10.1021/acs.jpcb.9b02125

Hilska, Joonas et al. "Epitaxial phases of high Bi content GaSbBi alloys". Journal of Crystal Growth. 2019, 516. 67-71. https://doi.org/10.1016/j.jcrysgro.2019.03.028

Isoaho, Riku et al. "Photovoltaic properties of low-bandgap (0.7–0.9 eV) lattice-matched GaInNAsSb solar junctions grown by molecular beam epitaxy on GaAs". Solar Energy Materials and Solar Cells. 2019, 195. 198-203. https://doi.org/10.1016/j.solmat.2019.02.030

Chintha, A. R. et al. "Role of fracture toughness in impact-abrasion wear". Wear. 2019, 428-429. 430-437. https://doi.org/10.1016/j.wear.2019.03.028

Sautter, Jürgen D. et al. "Tailoring Second-Harmonic Emission from (111)-GaAs Nanoantennas". Nano Letters. 2019, 19(6). 3905-3911. https://doi.org/10.1021/acs.nanolett.9b01112

Lolicato, Fabio et al. "The Role of Temperature and Lipid Charge on Intake/Uptake of Cationic Gold Nanoparticles into Lipid Bilayers". Small. 2019. 15(23). https://doi.org/10.1002/smll.201805046

Sariola, Veikko. "Analytical Expressions for Spring Constants of Capillary Bridges and Snap-in Forces of Hydrophobic Surfaces". Langmuir. 2019, 35(22). 7129-7135. https://doi.org/10.1021/acs.langmuir.9b00152

Lai, Yuli et al. "Correlation of Surface Morphology and Interfacial Adhesive Behavior between Cellulose Surfaces: Quantitative Measurements in Peak-Force Mode with the Colloidal Probe Technique". Langmuir. 2019, 35(22). 7312-7321. https://doi.org/10.1021/acs.langmuir.8b03503

Vuornos, Kaisa et al. "Bioactive glass ions induce efficient osteogenic differentiation of human adipose stem cells encapsulated in gellan gum and collagen type I hydrogels". Materials Science and Engineering C. 2019, 99. 905-918. https://doi.org/10.1016/j.msec.2019.02.035

Salmi, Tiina and Daniel Schoerling. "Energy density-method: An approach for a quick estimation of quench temperatures in high-field accelerator magnets". IEEE Transactions on Applied Superconductivity. 2019. 29(4). https://doi.org/10.1109/TASC.2018.2880340

Jokinen, J. and M. Kanerva. "Simulation of Delamination Growth at CFRP-Tungsten Aerospace Laminates Using VCCT and CZM Modelling Techniques". Applied Composite Materials. 2019, 26(3). 709-721. https://doi.org/10.1007/s10443-018-9746-5

Pourjamal, Sara et al. "Lasing in Ni Nanodisk Arrays". ACS Nano. 2019, 13(5). 5686-5692. https://doi.org/10.1021/acsnano.9b01006

Koivikko, Anastasia and Veikko Sariola "Fabrication of soft devices with buried fluid channels by using sacrificial 3D printed molds". 2019 2nd IEEE International Conference on Soft Robotics (RoboSoft). IEEE. 2019, 509-513. https://doi.org/10.1109/ROBOSOFT.2019.8722741

Hütner, Johanna, Touko Herranen, and Lasse Laurson. "Multistep Bloch-line-mediated Walker breakdown in ferromagnetic strips". Physical Review B. 2019. 99(17). https://doi.org/10.1103/PhysRevB.99.174427

Iyer, Siddharth, Matti P. Rissanen and Theo Kurtén. "Reaction between Peroxy and Alkoxy Radicals Can Form Stable Adducts". Journal of Physical Chemistry Letters. 2019, 10(9). 2051-2057. https://doi.org/10.1021/acs.jpclett.9b00405

Gil-Gallegos, S. et al. "Energy-dependent diffusion in a soft periodic Lorentz gas". European Physical Journal: Special Topics. 2019, 228(1). 143-160. https://doi.org/10.1140/epjst/e2019-800136-8

Kurka, M. et al. "GaInAsSb/AlGa(In)AsSb type I quantum wells emitting in 3 μm range for application in superluminescent diodes". Optical Materials. 2019, 91. 274-278. https://doi.org/10.1016/j.optmat.2019.03.036

Ferraris, S. et al. "Surface reactivity and silanization ability of borosilicate and Mg-Sr-based bioactive glasses". Applied Surface Science. 2019, 475. 43-55. https://doi.org/10.1016/j.apsusc.2018.12.218

Trainer, Daniel J. et al. "Moiré superlattices and 2D electronic properties of graphite/MoS2 heterostructures". Journal of Physics and Chemistry of Solids. 2019, 128. 325-330. https://doi.org/10.1016/j.jpcs.2017.10.034

Saari, Timo and Jouko Nieminen. "Spin filtering in silicene by edges and chemically or electrically induced interfaces". Journal of Physics and Chemistry of Solids. 2019, 128. 316-324. https://doi.org/10.1016/j.jpcs.2017.12.037

Valtonen, Kati et al. "Comparison of various high-stress wear conditions and wear performance of martensitic steels". Wear. 2019, 426-427(Part A). 3-13. https://doi.org/10.1016/j.wear.2018.12.006

Kulig, Waldemar et al. "Complex Behavior of Phosphatidylcholine-Phosphatidic Acid Bilayers and Monolayers: Effect of Acyl Chain Unsaturation". Langmuir. 2019, 35(17). 5944-5956. https://doi.org/10.1021/acs.langmuir.9b00381

Minarelli, Emma L. et al. "Engineering of Chern insulators and circuits of topological edge states". Physical Review B. 2019. 99(16). https://doi.org/10.1103/PhysRevB.99.165413

Puustinen, J., J. Hilska, and M. Guina. "Analysis of GaAsBi growth regimes in high resolution with respect to As/Ga ratio using stationary MBE growth". Journal of Crystal Growth. 2019, 511. 33-41. https://doi.org/10.1016/j.jcrysgro.2019.01.010

Asikainen, Sanja et al. "Hydrolysis and drug release from poly(ethylene glycol)-modified lactone polymers with open porosity". European Polymer Journal. 2019, 113. 165-175. https://doi.org/10.1016/j.eurpolymj.2019.01.056

Zhang, Zhifang et al. "Vibration-based delamination detection in curved composite plates". Composites Part A: Applied Science and Manufacturing. 2019, 119. 261-274. https://doi.org/10.1016/j.compositesa.2019.02.002

Dmitrieva, Iuliia et al. "Ternary borosilicates as potential cladding glasses for semiconductor core optical fibers". International Journal of Applied Glass Science. 2019, 10(2). 151-156. https://doi.org/10.1111/ijag.12874

Kummala, Ruut et al. "Antibacterial activity of silver and titania nanoparticles on glass surfaces". ADVANCES IN NATURAL SCIENCES: NANOSCIENCE AND NANOTECHNOLOGY. 2019. 10(1). https://doi.org/10.1088/2043-6254/ab0882

Berger, Paul R. et al. "Advancements in Solution Processable Devices using Metal Oxides For Printed Internet-of-Things Objects". 2019 Electron Devices Technology and Manufacturing Conference, EDTM 2019. IEEE. 2019, 160-162. https://doi.org/10.1109/EDTM.2019.8731322

Salo, Laura et al. "Emission measurements with gravimetric impactors and electrical devices: An aerosol instrument comparison". Aerosol Science and Technology. 2019, 53(5). 526-539. https://doi.org/10.1080/02786826.2019.1578858

Hintikka, Jouko et al. "Stable and unstable friction in fretting contacts". Tribology International. 2019, 131. 73-82. https://doi.org/10.1016/j.triboint.2018.10.014

Nurmi, Verner et al. "The formation and characterization of fretting-induced degradation layers using quenched and tempered steel". Tribology International. 2019, 131. 258-267. https://doi.org/10.1016/j.triboint.2018.09.012

Edwards, Thomas Edward James et al. "Transverse deformation of a lamellar TiAl alloy at high temperature by in situ microcompression". Acta Materialia. 2019, 166. 85-99. https://doi.org/10.1016/j.actamat.2018.11.050

Karhu, Marjaana et al. "Mining tailings as raw materials for reaction-sintered aluminosilicate ceramics: Effect of mineralogical composition on microstructure and properties". Ceramics International. 2019, 45(4). 4840-4848. https://doi.org/10.1016/j.ceramint.2018.11.180

Kanerva, M. et al. "DLC-treated aramid-fibre composites: Tailoring nanoscale-coating for macroscale performance". Composites Science and Technology. 2019, 171. 62-69. https://doi.org/10.1016/j.compscitech.2018.11.043

Garifullin, Marsel et al. "Initial axial stiffness of welded RHS T joints". Journal of Constructional Steel Research. 2019, 153. 459-472. https://doi.org/10.1016/j.jcsr.2018.10.025

Siljander, Sanna et al. "Conductive cellulose based foam formed 3D shapes—from innovation to designed prototype". Materials. 2019. 12(3). https://doi.org/10.3390/ma12030430

Murakami, M. et al. "Ultrahigh-pressure form of Si O2 glass with dense pyrite-type crystalline homology". Physical Review B. 2019. 99(4). https://doi.org/10.1103/PhysRevB.99.045153

Edwards, Thomas Edward James et al. "Deformation of lamellar γ-TiAl below the general yield stress". Acta Materialia. 2019, 163. 122-139. https://doi.org/10.1016/j.actamat.2018.09.061

Reyes, Guillermo et al. "Solvent Welding and Imprinting Cellulose Nanofiber Films Using Ionic Liquids". Biomacromolecules. 2019, 20(1). 502-514. https://doi.org/10.1021/acs.biomac.8b01554

van Nugteren, Jeroen et al. "A Fast Quench Protection System for High-Temperature Superconducting Magnets". IEEE Transactions on Applied Superconductivity. 2019. 29(1). https://doi.org/10.1109/TASC.2018.2848229

Wani, Owies M. et al. "An Artificial Nocturnal Flower via Humidity-Gated Photoactuation in Liquid Crystal Networks". Advanced Materials. 2019. 31(2). https://doi.org/10.1002/adma.201805985

Kiilakoski, Jarkko et al. "Characterization of Powder-Precursor HVOF-Sprayed Al2O3-YSZ/ZrO2 Coatings". Journal of Thermal Spray Technology. 2019, 28(1-2). 98-107. https://doi.org/10.1007/s11666-018-0816-x

Ruoko, Tero-Petri et al. "Charge carrier dynamics in tantalum oxide overlayered and tantalum doped hematite photoanodes". Journal of Materials Chemistry A. 2019, 7(7). 3206-3215. https://doi.org/10.1039/C8TA09501A

Ojha, N. et al. "Phosphate glasses with blue persistent luminescence prepared using the direct doping method". Optical Materials. 2019, 87. 151-156. https://doi.org/10.1016/j.optmat.2018.03.063

Viheriälä, Jukka et al. "1.3μm U-bend traveling wave SOA devices for high efficiency coupling to silicon photonics". and Reed, Graham T. Knights, Andrew P. (editors). Silicon Photonics XIV. Proceedings of SPIE - The International Society for Optical Engineering. SPIE, IEEE. 2019. https://doi.org/10.1117/12.2505935

Mereuta, Alexandru et al. "1.55-μm wavelength wafer-fused OP-VECSELs in flip-chip configuration". Keller, Ursula (ed.). Vertical External Cavity Surface Emitting Lasers (VECSELs) IX. Proceedings of SPIE - The International Society for Optical Engineering. SPIE, IEEE. 2019. https://doi.org/10.1117/12.2508342

Yadav, Amit et al. "405-nm pumped Ce 3+ -doped silica fiber for broadband fluorescence from cyan to red". and Digonnet, Michel J. F. Jiang, Shibin (editors). Optical Components and Materials XVI. Proceedings of SPIE - The International Society for Optical Engineering. SPIE, IEEE. 2019. https://doi.org/10.1117/12.2509599

Leivo, Virpi et al. "Analysis of hygrothermal parameters in Finnish and Lithuanian multi-family buildings before and after energy retrofits". Journal of Building Physics. 2019. 42(4). https://doi.org/10.1177/1744259118767236

Levämäki, H. et al. "An automated algorithm for reliable equation of state fitting of magnetic systems". Computational Materials Science. 2019, 156. 121-128. https://doi.org/10.1016/j.commatsci.2018.09.026

Kanerva, M. et al. "Antibacterial polymer fibres by rosin compounding and melt-spinning". Materials Today Communications. 2019. https://doi.org/10.1016/j.mtcomm.2019.05.003

Huttunen-Saarivirta, E. et al. "Behaviour of leaded tin bronze in simulated seawater in the absence and presence of tribological contact with alumina counterbody: Corrosion, wear and tribocorrosion". Tribology International. 2019, 129. 257-271. https://doi.org/10.1016/j.triboint.2018.08.021

Mandal, Sadananda, Lijo George, and Nikolai V. Tkachenko. "Charge transfer dynamics in CsPbBr3 perovskite quantum dots-anthraquinone/fullerene (C60) hybrids". Nanoscale. 2019, 11(3). 862-869. https://doi.org/10.1039/c8nr08445a

Nyyssönen, Tuomo et al. "Crystallography and Mechanical Properties of Intercritically Annealed Quenched and Partitioned High-Aluminium Steel". Materials Characterization. 2019. https://doi.org/10.1016/j.matchar.2018.12.004

Lopez-Iscoa, Pablo et al. "Design, processing, and characterization of an optical core-bioactive clad phosphate fiber for biomedical applications". JOURNAL OF THE AMERICAN CERAMIC SOCIETY. 2019. https://doi.org/10.1111/jace.16553

Mereuta, Alexandru et al. "Flip-chip Wafer-fused OP-VECSELs emitting 3.65 W at the 1.55-μm waveband". IEEE Journal of Selected Topics in Quantum Electronics. 2019. 25(6). https://doi.org/10.1109/JSTQE.2019.2922819

Salonius, Eve et al. "Gas-foamed poly(lactide-co-glycolide) and poly(lactide-co-glycolide) with bioactive glass fibres demonstrate insufficient bone repair in lapine osteochondral defects". Journal of Tissue Engineering and Regenerative Medicine. 2019, 13(3). 406-415. https://doi.org/10.1002/term.2801

Tomaskovic-Crook, Eva et al. "Human Neural Tissues from Neural Stem Cells Using Conductive Biogel and Printed Polymer Microelectrode Arrays for 3D Electrical Stimulation". ADVANCED HEALTHCARE MATERIALS. 2019. https://doi.org/10.1002/adhm.201900425

Valtonen, Kati et al. "Impact wear and mechanical behavior of steels at subzero temperatures". Tribology International. 2019, 129. 476-493. https://doi.org/10.1016/j.triboint.2018.08.016

Lu, Xi et al. "Integrated Use of Licensed-and Unlicensed-Band mmWave Radio Technology in 5G and beyond". IEEE Access. 2019, 7. 24376-24391. https://doi.org/10.1109/ACCESS.2019.2900195

Mishra, Ayush et al. "In-vitro dissolution characteristics and human adipose stem cell response to novel borophosphate glasses". Journal of Biomedical Materials Research - Part A. 2019. https://doi.org/10.1002/jbm.a.36722

Shin, Mingue et al. "Low-dimensional formamidinium lead perovskite architectures via controllable solvent intercalation". Journal of Materials Chemistry C. 2019, 7(13). 3945-3951. https://doi.org/10.1039/c9tc00379g

Kahle, Hermann et al. "MECSELs with direct emission in the 760 nm to 810 nm spectral range: A single- and double-side pumping comparison and high-power continuous-wave operation". Keller, Ursula (ed.). Vertical External Cavity Surface Emitting Lasers (VECSELs) IX. Proceedings of SPIE - The International Society for Optical Engineering. SPIE, IEEE. 2019. https://doi.org/10.1117/12.2512111

Järvinen, Henri et al. "Microstructure-property relationships of novel ultra-high strength press hardening steels". Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 2019, 50(2). 816-836. https://doi.org/10.1007/s11661-018-4967-7

Mandal, Sadananda and Nikolai V. Tkachenko. "Multiphoton Excitation of CsPbBr3 Perovskite Quantum Dots (PQDs): How Many Electrons Can One PQD Donate to Multiple Molecular Acceptors?". Journal of Physical Chemistry Letters. 2019, 2775-2781. https://doi.org/10.1021/acs.jpclett.9b01045

Radevici, Ivan et al. "Observation of local electroluminescent cooling and identifying the remaining challenges"., Seletskiy, Denis V. Epstein, Richard I. Sheik-Bahae, Mansoor (editors). Photonic Heat Engines: Science and Applications. Proceedings of SPIE - The International Society for Optical Engineering. SPIE, IEEE. 2019. https://doi.org/10.1117/12.2505814

Haapanen, Janne et al. "On the limit of superhydrophobicity: Defining the minimum amount of TiO2 nanoparticle coating". Materials Research Express. 2019. 6(3). https://doi.org/10.1088/2053-1591/aaf2ee

Ometov, Aleksandr et al. "Packet level performance assessment of mmWave backhauling technology for 3GPP NR Systems". IEEE Access. 2019, 7. 9860-9871. https://doi.org/10.1109/ACCESS.2018.2890558

Chen, Xiaochen, Leena Ukkonen, and Johanna Virkki. "Reliability evaluation of wearable radio frequency identification tags: Design and fabrication of a two-part textile antenna". Textile Research Journal. 2019. 89(4). https://doi.org/10.1177/0040517517750651

Alanen, Jarmo et al. "Remote diagnostics application software for remote handling equipment". Fusion Engineering and Design. 2019. https://doi.org/10.1016/j.fusengdes.2019.01.125

Jokiaho, Tuomas et al. "Role of Steel Plate Thickness on the Residual Stress Formation and Cracking Behavior During Flame Cutting". Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 2019. https://doi.org/10.1007/s11661-019-05314-w

He, Han et al. "Textile-integrated three-dimensional printed and embroidered structures for wearable wireless platforms". Textile Research Journal. 2019. 89(4). https://doi.org/10.1177/0040517517750649

Vuorinen, Tiina et al. "Validation of Printed, Skin-Mounted Multilead Electrode for ECG Measurements". Advanced Materials Technologies. 2019. https://doi.org/10.1002/admt.201900246

Seshadri, Shreyas et al. "Vocal Effort Based Speaking Style Conversion Using Vocoder Features and Parallel Learning". IEEE Access. 2019, 7. 17230-17246. https://doi.org/10.1109/ACCESS.2019.2895923

Tuominen, Marjukka et al. "Oxidation-Induced Changes in the ALD-Al2O3/InAs(100) Interface and Control of the Changes for Device Processing". ACS Applied Materials and Interfaces. 2018, 10(51). 44932-44940. https://doi.org/10.1021/acsami.8b17843

Joost, Urmas et al. "Reversible photodoping of TiO2 nanoparticles". Chemistry of Materials. 2018, 30(24). 8968-8974. https://doi.org/10.1021/acs.chemmater.8b04813

Czaplicki, Robert et al. "Less Is More: Enhancement of Second-Harmonic Generation from Metasurfaces by Reduced Nanoparticle Density". Nano Letters. 2018, 18(12). 7709-7714. https://doi.org/10.1021/acs.nanolett.8b03378

Garifullin, Marsel. "Experimental moment resistance of rectangular hollow section T joints". MATEC Web of Conferences. 2018. 245. https://doi.org/10.1051/matecconf/201824508003

Aakko-Saksa, Päivi et al. "Considerations in analysing elemental carbon from marine engine exhaust using residual, distillate and biofuels". Journal of Aerosol Science. 2018, 126. 191-204. https://doi.org/10.1016/j.jaerosci.2018.09.005

Hokka, M. et al. "Effects of Microstructure on the Dynamic Strain Aging in Ferritic-Pearlitic Steels". Journal of Dynamic Behavior of Materials. 2018, 4(4). 452-463. https://doi.org/10.1007/s40870-018-0169-z

Murtomäki, Jaakko Samuel et al. "ICED - Inductively Coupled Energy Dissipater for Future High Field Accelerator Magnets". IEEE Transactions on Applied Superconductivity. 2018. 28(8). https://doi.org/10.1109/TASC.2018.2841909

Kroon, Mart et al. Cell response to round and star-shaped polylactide fibers. 2018.

Casula, Riccardo et al. "Cascaded crystalline raman lasers for extended wavelength coverage: Continuous-wave, third-stokes operation". Optica. 2018, 5(11). 1406-1413. https://doi.org/10.1364/OPTICA.5.001406

Gunes, M. et al. "Optical properties of GaAs1-xBix/GaAs quantum well structures grown by molecular beam epitaxy on (100) and (311)B GaAs substrates". Semiconductor Science and Technology. 2018. 33(12). https://doi.org/10.1088/1361-6641/aaea2e

Habib, M., E. Ozbay, and H. Caglayan "Tunable Reflection Type Plasmon Induced Transparency with Graphene". 2018 12th International Congress on Artificial Materials for Novel Wave Phenomena, METAMATERIALS 2018. IEEE. 2018, 170-172. https://doi.org/10.1109/MetaMaterials.2018.8534142

Ottosen, Niels Saabye, Matti Ristinmaa, and Reijo Kouhia. "Enhanced multiaxial fatigue criterion that considers stress gradient effects". International Journal of Fatigue. 2018, 116. 128-139. https://doi.org/10.1016/j.ijfatigue.2018.05.024

Huttunen-Saarivirta, E. et al. "Tribocorrosion behaviour of aluminium bronze in 3.5 wt.% NaCl solution". Corrosion Science. 2018, 144. 207-223. https://doi.org/10.1016/j.corsci.2018.08.058

Nair, Devi Geetha, Paavo Rasilo and Antero Arkkio. "Sensitivity Analysis of Inverse Thermal Modeling to Determine Power Losses in Electrical Machines". IEEE Transactions on Magnetics. 2018. 54(11). https://doi.org/10.1109/TMAG.2018.2853084

Narongthong, Jirawat et al. "An efficient highly flexible strain sensor: Enhanced electrical conductivity, piezoresistivity and flexibility of a strongly piezoresistive composite based on conductive carbon black and an ionic liquid". Composites Part A: Applied Science and Manufacturing. 2018, 113. 330-338. https://doi.org/10.1016/j.compositesa.2018.08.004

Saeidi, Shayan et al. "Demonstration of optical nonlinearity in InGaAsP/InP passive waveguides". Optical Materials. 2018, 84. 524-530. https://doi.org/10.1016/j.optmat.2018.07.037

Pihlman, Hanna et al. "Novel osteoconductive β-tricalcium phosphate/poly(L-lactide-co-e-caprolactone) scaffold for bone regeneration: a study in a rabbit calvarial defect". Journal of Materials Science: Materials in Medicine. 2018. 29(10). https://doi.org/10.1007/s10856-018-6159-9

Šutka, Andris et al. "Solvothermal synthesis derived Co-Ga codoped ZnO diluted magnetic degenerated semiconductor nanocrystals". Journal of Alloys and Compounds. 2018, 763. 164-172. https://doi.org/10.1016/j.jallcom.2018.05.036

Del Cerro, P. Roldan et al. "Processing and Characterization of Bioactive Borosilicate Glasses and Scaffolds with Persistent Luminescence". 2018 20th International Conference on Transparent Optical Networks, ICTON 2018. Conference proceedings : International Conference on Transparent Optical Networks. IEEE COMPUTER SOCIETY PRESS. 2018. https://doi.org/10.1109/ICTON.2018.8473916

Keinänen, Pasi, Amit Das, and Jyrki Vuorinen. "Further enhancement of mechanical properties of conducting rubber composites based on multiwalled carbon nanotubes and Nitrile Rubber by solvent treatment". Materials. 2018. 11(10). https://doi.org/10.3390/ma11101806

Rajan, Rathish et al. "Mechanical, thermal, and burning properties of viscose fabric composites: Influence of epoxy resin modification". Journal of Applied Polymer Science. 2018. 135(36). https://doi.org/10.1002/app.46673

Kroon, Mart et al. A COMPARATIVE IN VITRO STUDY OF CELL GROWTH ON TEXTILE SCAFFOLDS FOR TISSUE ENGINEERING APPLICATIONS. 2018.

Saari, Sampo et al. "Performance evaluation of the HR-ELPI + inversion". Aerosol Science and Technology. 2018, 52(9). 1037-1047. https://doi.org/10.1080/02786826.2018.1500679

Bomberg, Malin et al. "Post operation inactivation of acidophilic bioleaching microorganisms using natural chloride-rich mine water". Hydrometallurgy. 2018, 180. 236-245. https://doi.org/10.1016/j.hydromet.2018.06.013

Kaksonen, Anna H. et al. "Recent progress in biohydrometallurgy and microbial characterisation". Hydrometallurgy. 2018, 180. 7-25. https://doi.org/10.1016/j.hydromet.2018.06.018

Aho, Arto et al. "Dilute nitride triple junction solar cells for space applications: Progress towards highest AM0 efficiency". Progress in Photovoltaics: Research and Applications. 2018, 26(19). 740-744. https://doi.org/10.1002/pip.3011

Yadav, A. et al. "Fluorescence bandwidth of 280nm from broadband Ce3+-doped silica fiber pumped with blue laser diode". 2018 International Conference Laser Optics (ICLO) . IEEE. 2018, 133-133. https://doi.org/10.1109/LO.2018.8435861

Järvinen, A., J. Keskinen and J. Yli-Ojanperä. "Extending the Faraday cup aerosol electrometer based calibration method up to 5 µm". Aerosol Science and Technology. 2018, 52(8). 828-840. https://doi.org/10.1080/02786826.2018.1472742

Sajna, M. S. et al. "Enhanced resonant nonlinear absorption and optical limiting in Er3+ ions doped multicomponent tellurite glasses". Materials Research Bulletin. 2018, 104. 227-235. https://doi.org/10.1016/j.materresbull.2018.04.026

Maina, Martin Ruthandi et al. "High surface quality welding of aluminum using adjustable ring-mode fiber laser". Journal of Materials Processing Technology. 2018, 258. 180-188. https://doi.org/10.1016/j.jmatprotec.2018.03.030

Cemlyn, Ben et al. "Near-threshold high spin amplification in a 1300 nm GaInNAs spin laser". Semiconductor Science and Technology. 2018. 33(9). https://doi.org/10.1088/1361-6641/aad42e

Mosallaei, Mahmoud et al. "Geometry Analysis in Screen-Printed Stretchable Interconnects". IEEE Transactions on Components, Packaging and Manufacturing Technology. 2018, 8(8). 1344-1352. https://doi.org/10.1109/TCPMT.2018.2854635

Hiltunen, Arto et al. "Design aspects of all atomic layer deposited TiO2–Fe2O3 scaffold-absorber photoanodes for water splitting". Sustainable Energy & Fuels. 2018, 2(9). 2124-2130. https://doi.org/10.1039/C8SE00252E

Mikkonen, Riikka et al. "Processing of printed silver patterns on an ETFE substrate". Proceedings - 2018 IMAPS Nordic Conference on Microelectronics Packaging, NORDPAC 2018. IEEE. 2018, 1-7. https://doi.org/10.23919/NORDPAC.2018.8423860

Abu Khamidakh, Amna E. et al. "Wound healing of human embryonic stem cell-derived retinal pigment epithelial cells is affected by maturation stage". BioMedical Engineering Online. 2018. 17(1). https://doi.org/10.1186/s12938-018-0535-z

Prando, G. A. et al. "Exciton localization and structural disorder of GaAs1-xBix/GaAs quantum wells grown by molecular beam epitaxy on (311)B GaAs substrates". Semiconductor Science and Technology. 2018. 33(8). https://doi.org/10.1088/1361-6641/aad02e

Kulju, S. et al. "Fluid flow simulations meet high-speed video: Computer vision comparison of droplet dynamics". Journal of Colloid and Interface Science. 2018, 522. 48-56. https://doi.org/10.1016/j.jcis.2018.03.053

Zhao, Junjie et al. "Mechanical stress analysis during a quench in CLIQ protected 16 T dipole magnets designed for the future circular collider". Physica C: Superconductivity and its Applications. 2018, 550. 27-34. https://doi.org/10.1016/j.physc.2018.04.003

Quik, Joris T.K. et al. "Directions in QPPR development to complement the predictive models used in risk assessment of nanomaterials". NanoImpact. 2018, 11. 58-66. https://doi.org/10.1016/j.impact.2018.02.003

Mikkonen, Riikka and Matti Mäntysalo. "Evaluation of screen printed silver trace performance and long-term reliability against environmental stress on a low surface energy substrate". Microelectronics Reliability. 2018, 86. 54-65. https://doi.org/10.1016/j.microrel.2018.05.010

Roldán Del Cerro, P. et al. "Persistent luminescent borosilicate glasses using direct particles doping method". Scripta Materialia. 2018, 151. 38-41. https://doi.org/10.1016/j.scriptamat.2018.03.034

Nommeots-Nomm, A. et al. "Luminescence of Er3+ doped oxyfluoride phosphate glasses and glass-ceramics". Journal of Alloys and Compounds. 2018, 751. 224-230. https://doi.org/10.1016/j.jallcom.2018.04.101

Santa-aho, Suvi et al. "Manufacturing of calibration samples for barkhausen noise method: case studies on temperature controlled laser and hydrogen-oxygen flame". Proceedings of the 12th ECNDT: June 11-15, Gothenburg, Sweden, 2018. 2018.

Chen, X. et al. "Fabrication and reliability evaluation of passive UHF RFID T-shirts". 2018 IEEE International Workshop on Antenna Technology, iWAT2018 - Proceedings. IEEE. 2018, 1-4. https://doi.org/10.1109/IWAT.2018.8379146

Lahdensivu, Jukka, Arto Köliö and David Husaini. "Alkali-silica reaction in Southern-Finland's bridges". Case Studies in Construction Materials. 2018, 8. 469-475. https://doi.org/10.1016/j.cscm.2018.03.006

Todesco, Ezio et al. "Progress on HL-LHC Nb3Sn Magnets". IEEE Transactions on Applied Superconductivity. 2018. 28(4). https://doi.org/10.1109/TASC.2018.2830703

Cheng, Da et al. "Quench simulation results for a 12-T twin-aperture dipole magnet". Cryogenics. 2018, 92. 13-19. https://doi.org/10.1016/j.cryogenics.2018.03.005

Kaunisto, Kimmo et al. "The effect of carbon and nickel additions on the precursor synthesis of Cr3C2-Ni nanopowder". Ceramics International. 2018, 44(8). 9338-9346. https://doi.org/10.1016/j.ceramint.2018.02.146

Javaheri, Vahid et al. "Computational design of a novel medium-carbon, low-alloy steel microalloyed with niobium". Journal of Materials Engineering and Performance. 2018, 27(6). 2978-2992. https://doi.org/10.1007/s11665-018-3376-9

Ojha, N. et al. "Influence of the phosphate glass melt on the corrosion of functional particles occurring during the preparation of glass-ceramics". Ceramics International. 2018, 44(10). 11807-11811. https://doi.org/10.1016/j.ceramint.2018.03.267

Murtomäki, Jaakko Samuel et al. "Investigation of REBCO Roebel Cable Irreversible Critical Current Degradation Under Transverse Pressure". IEEE Transactions on Applied Superconductivity. 2018. 28(4). https://doi.org/10.1109/TASC.2018.2829150

Goyos-Ball, Lidia et al. "The effects of laser patterning 10CeTZP-Al2O3 nanocomposite disc surfaces: Osseous differentiation and cellular arrangement in vitro". Ceramics International. 2018, 44(8). 9472-9478. https://doi.org/10.1016/j.ceramint.2018.02.164

van Nugteren, Jeroen et al. "Towards REBCO 20T+ Dipoles for Accelerators". IEEE Transactions on Applied Superconductivity. 2018. 28(4). https://doi.org/10.1109/TASC.2018.2820177

Saari, Jesse, Harri Ali-Löytty, and Mika Valden Role of Oxide Defects in ALD grown TiO2 Coatings on Performance as Photoanode Protection Layer. 2018.

Bawazir, Sarah S. et al. "Multiple Access for Visible Light Communications: Research Challenges and Future Trends". IEEE Access. 2018, 6. 26167-26174. https://doi.org/10.1109/ACCESS.2018.2832088

Rasappa, Sozaraj et al. "Morphology evolution of PS-b-PDMS block copolymer and its hierarchical directed self-assembly on block copolymer templates". Microelectronic Engineering. 2018, 192. 1-7. https://doi.org/10.1016/j.mee.2018.02.002

Raappana, Marianna et al. "Wet etching of dilute nitride GaInNAs, GaInNAsSb, and GaNAsSb alloys lattice-matched to GaAs". Corrosion Science. 2018, 136. 268-274. https://doi.org/10.1016/j.corsci.2018.03.018

Tuukkanen, Sampo Nanofibrillated and bacterial celluloses as renewable piezoelectric sensor materials. 2018. 1 p.

Sarcan, F. et al. "A study of electric transport in n- and p-type modulation-doped GaInNAs/GaAs quantum well structures under a high electric field". Semiconductor Science and Technology. 2018. 33(6). https://doi.org/10.1088/1361-6641/aabc39

Sutka, Andris et al. "Switchable light reflectance in dilute magneto-optical colloids based on nickel ferrite nanowires". e-Journal of Surface Science and Nanotechnology. 2018, 16. 119-121. https://doi.org/10.1380/ejssnt.2018.119

Harra, Juha et al. "Characteristics of nFOG, an aerosol-based wet thin film coating technique". Journal of Coatings Technology Research. 2018, 15(3). 623-632. https://doi.org/10.1007/s11998-017-0022-7

Melcr, Josef et al. "Accurate Binding of Sodium and Calcium to a POPC Bilayer by Effective Inclusion of Electronic Polarization". Journal of Physical Chemistry B. 2018, 122(16). 4546-4557. https://doi.org/10.1021/acs.jpcb.7b12510

Nugteren, J. Van et al. "Powering of an HTS dipole insert-magnet operated standalone in helium gas between 5 and 85 K". Superconductor Science and Technology. 2018. 31(6). https://doi.org/10.1088/1361-6668/aab887

Guina, Mircea et al. "Quantum-well Laser Emitting at 1.2 μm-1.3 μm Window Monolithically Integrated on Ge Substrate". 43rd European Conference on Optical Communication, ECOC 2017. IEEE. 2018, 1-3. https://doi.org/10.1109/ECOC.2017.8345837

Khan, Musammir et al. "Composite Hydrogels Using Bioinspired Approach with in Situ Fast Gelation and Self-Healing Ability as Future Injectable Biomaterial". ACS Applied Materials & Interfaces. 2018, 10(14). 11950-11960. https://doi.org/10.1021/acsami.8b01351

Magarkar, Aniket et al. "Membrane bound COMT isoform is an interfacial enzyme: General mechanism and new drug design paradigm". Chemical Communications. 2018, 54(28). 3440-3443. https://doi.org/10.1039/c8cc00221e

Åkerblom, Markku et al. "Non-intersecting leaf insertion algorithm for tree structure models". Interface Focus. 2018. 8(2). https://doi.org/10.1098/rsfs.2017.0045

Kaasalainen, Sanna et al. "Uncertainty in multispectral lidar signals caused by incidence angle effects". Interface Focus. 2018. 8(2). https://doi.org/10.1098/rsfs.2017.0033

Disney, M. I. et al. "Weighing trees with lasers: Advances, challenges and opportunities". Interface Focus. 2018. 8(2). https://doi.org/10.1098/rsfs.2017.0048

Matikainen, V. et al. "Effect of nozzle geometry on the microstructure and properties of hvaf-sprayed wc-10co4cr and cr3c2-25nicr coatings". Journal of Thermal Spray Technology. 2018, 27(4). 680-694. https://doi.org/10.1007/s11666-018-0717-z

Habib, Mohsin et al. "Graphene-based tunable plasmon induced transparency in gold strips". Optical Materials Express. 2018, 8(4). 1069-1074. https://doi.org/10.1364/OME.8.001069, https://doi.org/10.1364/OME.8.001069

Ruuskanen, Janne et al. "Optimization of an E3SPreSSO Energy-Extraction System for High-Field Superconducting Magnets". IEEE Transactions on Applied Superconductivity. 2018. 28(3). https://doi.org/10.1109/TASC.2018.2794457

Koivusalo, Laura et al. "Hydrazone crosslinked hyaluronan-based hydrogels for therapeutic delivery of adipose stem cells to treat corneal defects". Materials Science and Engineering C. 2018, 85. 68-78. https://doi.org/10.1016/j.msec.2017.12.013

Rossi, Lucio et al. "The EuCARD2 Future Magnets Program for particle accelerator high field dipoles: review of results and next steps". IEEE Transactions on Applied Superconductivity. 2018. 28(3). https://doi.org/10.1109/TASC.2017.2784357

Raunio, Jukka-Pekka, Tommi Löyttyniemi, and Risto Ritala. "Online quality evaluation of tissue paper structure on new generation tissue machines". Nordic Pulp and Paper Research Journal. 2018, 33(1). 133-141. https://doi.org/10.1515/npprj-2018-3004

Sassatelli, Paolo et al. "Properties of HVOF-sprayed Stellite-6 coatings". Surface and Coatings Technology. 2018, 338. 45-62. https://doi.org/10.1016/j.surfcoat.2018.01.078

Poutanen, Mikko et al. "Thermal Isomerization of Hydroxyazobenzenes as a Platform for Vapor Sensing". ACS Macro Letters. 2018, 7(3). 381-386. https://doi.org/10.1021/acsmacrolett.8b00093

Janka, Leo et al. "Improving the high temperature abrasion resistance of thermally sprayed Cr3C2-NiCr coatings by WC addition". Surface and Coatings Technology. 2018, 337. 296-305. https://doi.org/10.1016/j.surfcoat.2018.01.035

Kulig, Waldemar et al. "Bobbing of Oxysterols: Molecular Mechanism for Translocation of Tail-Oxidized Sterols through Biological Membranes". Journal of Physical Chemistry Letters. 2018, 9(5). 1118-1123. https://doi.org/10.1021/acs.jpclett.8b00211

Bhagavatheswaran, Eshwaran Subramani et al. "High-performance elastomeric strain sensors based on nanostructured carbon fillers for potential tire applications". Materials Today Communications. 2018, 14. 240-248. https://doi.org/10.1016/j.mtcomm.2018.01.013

Karvinen, Jennika et al. "Soft hydrazone crosslinked hyaluronan- and alginate-based hydrogels as 3D supportive matrices for human pluripotent stem cell-derived neuronal cells". Reactive and Functional Polymers. 2018, 124. 29-39. https://doi.org/10.1016/j.reactfunctpolym.2017.12.019

Hannula, Markku et al. "Improved Stability of Atomic Layer Deposited Amorphous TiO2 Photoelectrode Coatings by Thermally Induced Oxygen Defects". Chemistry of Materials. 2018, 30(4). 1199-1208. https://doi.org/10.1021/acs.chemmater.7b02938

Kainulainen, Tuomo P. et al. "UV-Blocking Synthetic Biopolymer from Biomass-Based Bifuran Diester and Ethylene Glycol". Macromolecules. 2018, 51(5). 1822-1829. https://doi.org/10.1021/acs.macromol.7b02457

Vaikuntam, Sankar Raman et al. "Entrapped Styrene Butadiene Polymer Chains by Sol-Gel-Derived Silica Nanoparticles with Hierarchical Raspberry Structures". Journal of Physical Chemistry B. 2018, 122(6). 2010-2022. https://doi.org/10.1021/acs.jpcb.7b11792

Yury, Korobov et al. "Arc-sprayed Fe-based coatings from coredwires for wear and corrosion protection in power engineering". Coatings. 2018. 8(2). https://doi.org/10.3390/coatings8020071

Fedele, C., P. A. Netti and S. Cavalli. "Azobenzene-based polymers: Emerging applications as cell culture platforms". Biomaterials Science. 2018, 6(5). 990-995. https://doi.org/10.1039/c8bm00019k

Barreca, Davide et al. "Controlled Growth of Supported ZnO Inverted Nanopyramids with Downward Pointing Tips". Crystal Growth and Design. 2018, 18(4). 2579-2587. https://doi.org/10.1021/acs.cgd.8b00198

Das, Amit et al. "Temperature scanning stress relaxation of an autonomous self-healing elastomer containing non-covalent reversible network junctions". Polymers. 2018. 10(1). https://doi.org/10.3390/polym10010094

Pennacchio, Fabrizio A. et al. "Three-Dimensional Microstructured Azobenzene-Containing Gelatin as a Photoactuable Cell Confining System". ACS Applied Materials and Interfaces. 2018, 10(1). 91-97. https://doi.org/10.1021/acsami.7b13176

Lopez-Iscoa, Pablo et al. "Design, synthesis, and structure-property relationships of Er3+ -doped TiO2 luminescent particles synthesized by sol-gel". Nanomaterials. 2018. 8(1). https://doi.org/10.3390/nano8010020

Katkovnik, Vladimir et al. "Multiwavelength surface contouring from phase-coded diffraction patterns". Unconventional Optical Imaging 2018. Strasbourg, France. Proceedings of SPIE - The International Society for Optical Engineering. SPIE. 2018. https://doi.org/10.1117/12.2306127

Saccone, Marco et al. "Ortho-Fluorination of azophenols increases the mesophase stability of photoresponsive hydrogen-bonded liquid crystals". Journal of Materials Chemistry C. 2018, 6(37). 9958-9963. https://doi.org/10.1039/c8tc02611d

Suokas, E. and J. Kuusipalo "Process time importance in the product properties evolvement during extrusion coating of different LDPE grades". 15th TAPPI Advanced Coating Fundamentals Symposium 2018: Charlotte; United States; 14 April 2018 through 15 April 2018. TAPPI Press. 2018, 151-159.

Zhao, Yongguang et al. "Sub-100 fs pulse generation from a Tm,Ho: CALYO laser mode-locked by a GaSb-based SESAM at ~2043 nm". CLEO: Science and Innovations, CLEO_SI 2018. OSA - The Optical Society. 2018. https://doi.org/10.1364/CLEO_SI.2018.SF2N.1

Noronen, Teppo et al. "Ultra-large mode area single frequency anisotropic MOPA with double clad Yb-doped tapered fiber". Fiber Lasers XV: Technology and Systems. Proceedings of SPIE. SPIE, IEEE. 2018. https://doi.org/10.1117/12.2288942

Murtomaeki, Jaakko Samuel et al. "10 kA Joints for HTS Roebel Cables". IEEE Transactions on Applied Superconductivity. 2018. 28(3). https://doi.org/10.1109/TASC.2018.2804951

Voronin, V. et al. "Action recognition using the 3D dense microblock difference". Counterterrorism, Crime Fighting, Forensics, and Surveillance Technologies II. Proceedings of SPIE. SPIE. 2018. https://doi.org/10.1117/12.2326801

Kerst, Thomas and Juha Toivonen "Alpha radiation induced luminescence in solar blind spectral region". CLEO: Applications and Technology, CLEO_AT 2018. OSA - The Optical Society. 2018. https://doi.org/10.1364/CLEO_AT.2018.ATh4O.8

Rajan, Dhanesh Kattipparambil et al. "A portable live-cell imaging system with an invert-upright-convertible architecture and a mini-bioreactor for long-term simultaneous cell imaging, chemical sensing and electrophysiological recording". IEEE Access. 2018. 6. https://doi.org/10.1109/ACCESS.2018.2804378

Glorieux, Benoit et al. "Better understanding of the role of SiO2, P2O5 and Al2O3 on the spectroscopic properties of Yb3+ doped silica sol-gel glasses". Journal of Non-Crystalline Solids. 2018, 482. 46-51. https://doi.org/10.1016/j.jnoncrysol.2017.12.021

Ojansivu, M. et al. "Bioactive glass induced osteogenic differentiation of human adipose stem cells is dependent on cell attachment mechanism and mitogen-activated protein kinases". European Cells and Materials. 2018, 35. 53-71. https://doi.org/10.22203/eCM.v035a05

Orell, Olli et al. "Characterization of elastic constants of anisotropic composites in compression using digital image correlation". Composite Structures. 2018, 185. 176-185. https://doi.org/10.1016/j.compstruct.2017.11.008

Amanatidis, Stavros et al. "Comparative performance of a thermal denuder and a catalytic stripper in sampling laboratory and marine exhaust aerosols". Aerosol Science and Technology. 2018, 52(4). 1-13. https://doi.org/10.1080/02786826.2017.1422236

Saarimaa, Ville et al. "Convenient extraction method for quantification of thin zinc patina layers". Surface and Interface Analysis. 2018, 50(5). 564-570. https://doi.org/10.1002/sia.6429

Ojha, N. et al. "Decomposition of persistent luminescent microparticles in corrosive phosphate glass melt". Corrosion Science. 2018, 135. 207-214. https://doi.org/10.1016/j.corsci.2018.02.050

Maule, M. et al. "Delivering Fairness and QoS Guarantees for LTE/Wi-Fi Coexistence under LAA Operation". IEEE Access. 2018. 6. https://doi.org/10.1109/ACCESS.2018.2793941

Lorin, Clement et al. "Design of a Nb3Sn 400 T/m quadrupole for the Future Circular Collider". IEEE Transactions on Applied Superconductivity. 2018. 28(3). https://doi.org/10.1109/TASC.2018.2797945

Fang, Cheng Yi et al. "Development of efficient electrically pumped nanolasers based on InAlGaAs tunnel junction". CLEO: Science and Innovations, CLEO_SI 2018. OSA - The Optical Society. 2018. https://doi.org/10.1364/CLEO_SI.2018.SW4Q.4

Perumbilavil, S. et al. "Directional random laser by combining cavity-less lasing and spatial solitons in liquid crystals". Nonlinear Photonics, NP 2018. OSA - The Optical Society. 2018. https://doi.org/10.1364/NP.2018.NpW2C.4

Ali, Saima et al. "Effect of Morphology and Crystal Structure on the Thermal Conductivity of Titania Nanotubes". Nanoscale Research Letters. 2018. 13. https://doi.org/10.1186/s11671-018-2613-3

Järvinen, Henri et al. "Effect of paint baking treatment on the properties of press hardened boron steels". Journal of Materials Processing Technology. 2018, 252. 90-104. https://doi.org/10.1016/j.jmatprotec.2017.08.027

Durandin, Nikita A. et al. "Efficient photon upconversion at remarkably low annihilator concentrations in a liquid polymer matrix: when less is more". Chemical Communications. 2018, 54(99). 14029-14032. https://doi.org/10.1039/c8cc07592a

Assanto, Gaetano et al. "Electro-optic steering of random laser emission in liquid crystals". Photonics Letters of Poland. 2018, 10(4). 103-105. https://doi.org/10.4302/plp.v10i4.852

Vuorinen, E. et al. "Erosive-abrasive wear behavior of carbide-free bainitic and boron steels compared in simulated field conditions". Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 2018, 232(1). 3-13. https://doi.org/10.1177/1350650117739125

Poutala, Arto, Tuomas Kovanen and Lauri Kettunen. "Essential Measurements for Finite Element Simulations of Magnetostrictive Materials". IEEE Transactions on Magnetics. 2018. 54(1). https://doi.org/10.1109/TMAG.2017.2766599

Kiilakoski, J. et al. "Evaluating the toughness of APS and HVOF-sprayed Al2O3-ZrO2-coatings by in-situ- and macroscopic bending". Journal of the European Ceramic Society. 2018, 38(4). 1908-1918. https://doi.org/10.1016/j.jeurceramsoc.2017.11.056

Grosu, Marian C. et al. "Fabrication and characterization of magnetic cotton yarns for textile applications". Journal of the Textile Institute. 2018, 109(10). 1348-1359. https://doi.org/10.1080/00405000.2018.1423935

Rostedt, A. and J. Keskinen. "Flow rate-independent electrical aerosol sensor". Aerosol Science and Technology. 2018, 52(11). 1283-1292. https://doi.org/10.1080/02786826.2018.1498586

Kantola, Emmi et al. "Frequency-doubled VECSEL employing a Volume Bragg Grating for linewidth narrowing". CLEO: Applications and Technology, CLEO_AT 2018. OSA - The Optical Society. 2018. https://doi.org/10.1364/CLEO_AT.2018.JTu2A.17

Kantola, Emmi et al. "Frequency-doubled wafer-fused 638 nm VECSEL with an output power of 5.6 W". CLEO: Applications and Technology, CLEO_AT 2018. OSA - The Optical Society. 2018. https://doi.org/10.1364/CLEO_AT.2018.JTu2A.10

Mateos, Xavier et al. "Highly-efficient Ho:KY(WO4)2 thin-disk lasers at 2.06 μm". Pacific-Rim Laser Damage 2018: Optical Materials for High-Power Lasers. Proceedings of SPIE. SPIE, IEEE. 2018. https://doi.org/10.1117/12.2316822

Zia, Nouman et al. "High performance GaSb superluminescent diodes for tunable light source at 2 μm and 2.55 μm". CLEO: Applications and Technology, CLEO_AT 2018. OSA - The Optical Society. 2018. https://doi.org/10.1364/CLEO_AT.2018.JTu2A.28

Shakun, Alexandra et al. "Improved electromechanical response in acrylic rubber by different carbon-based fillers". Polymer Engineering and Science. 2018, 58(3). 395-404. https://doi.org/10.1002/pen.24586

Karioja, Pentti et al. "Integrated multi-wavelength mid-IR light source for gas sensing". Next-Generation Spectroscopic Technologies XI. SPIE Conference Proceedings. SPIE, IEEE. 2018. https://doi.org/10.1117/12.2305712

Vinha, Juha et al. "Internal moisture excess of residential buildings in Finland". Journal of Building Physics. 2018, 42(3). 239-258. https://doi.org/10.1177/1744259117750369

Wirdatmadja, Stefanus et al. "Light propagation analysis in nervous tissue for wireless optogenetic nanonetworks". Optogenetics and Optical Manipulation 2018. SPIE. 2018. https://doi.org/10.1117/12.2288786

Zeng, Hao et al. "Light Robots: Bridging the Gap between Microrobotics and Photomechanics in Soft Materials". Advanced Materials. 2018. 30(24). https://doi.org/10.1002/adma.201703554

Cappelluti, F. et al. "Light-trapping enhanced thin-film III-V quantum dot solar cells fabricated by epitaxial lift-off". Solar Energy Materials and Solar Cells. 2018, 181. 83-92. https://doi.org/10.1016/j.solmat.2017.12.014

Toral, Fernando, Javier Munilla, and Tiina Salmi. "Magnetic and mechanical design of a 16 T common coil dipole for FCC". IEEE Transactions on Applied Superconductivity. 2018. 28(3). https://doi.org/10.1109/TASC.2018.2797909

Rajan, Rathish et al. "Modification of epoxy resin by silane-coupling agent to improve tensile properties of viscose fabric composites". Polymer Bulletin. 2018, 75(1). 167–195. https://doi.org/10.1007/s00289-017-2022-2

Virtanen, Heikki et al. "Narrow-linewidth 780 nm DFB lasers fabricated using nanoimprint lithography". IEEE Photonics Technology Letters. 2018, 30(1). 51-54. https://doi.org/10.1109/LPT.2017.2772337

Kaneda, Yushi et al. "Narrow-linewidth operation of folded VECSEL cavity with twist-mode configuration". Advanced Solid State Lasers, ASSL 2018. Optics InfoBase Conference Papers. OSA - The Optical Society. 2018. https://doi.org/10.1364/ASSL.2018.ATh2A.7

Koivuluoto, Heli et al. "Novel Online Diagnostic Analysis for In-Flight Particle Properties in Cold Spraying". Journal of Thermal Spray Technology. 2018, 27(3). 423–432. https://doi.org/10.1007/s11666-018-0685-3

Stenvall, Antti and Valtteri Lahtinen. "Open Material Property Library With Native Simulation Tool Integrations - MASTO". IEEE Transactions on Applied Superconductivity. 2018. https://doi.org/10.1109/TASC.2018.2799850

Marshoud, Hanaa et al. "Optical Adaptive Precoding for Visible Light Communications". IEEE Access. 2018, 6. 22121-22130. https://doi.org/10.1109/ACCESS.2018.2805939

Selim, Bassant et al. "Performance Analysis of Non-Orthogonal Multiple Access under I/Q Imbalance". IEEE Access. 2018, 6. 18453 - 18468. https://doi.org/10.1109/ACCESS.2018.2820074

Saarinen, M. et al. "Persistent luminescent particles containing bioactive glasses: Prospect toward tracking in-vivo implant mineralization using biophotonic ceramics". Journal of the European Ceramic Society. 2018, 38(1). 287-295. https://doi.org/10.1016/j.jeurceramsoc.2017.08.024

Wani, Owies M. et al. "Programming Photoresponse in Liquid Crystal Polymer Actuators with Laser Projector". Advanced Optical Materials. 2018. 6(1). https://doi.org/10.1002/adom.201700949

Ryczkowski, P. et al. "Real-time full-field characterization of transient dissipative soliton dynamics in a mode-locked laser". Nature Photonics. 2018, 12. 221–227. https://doi.org/10.1038/s41566-018-0106-7

Ryczkowski, Piotr et al. "Real-time measurements of nonlinear instabilities in optical fibers". CLEO: Applications and Technology, CLEO_AT 2018. OSA - The Optical Society. 2018. https://doi.org/10.1364/CLEO_AT.2018.AF2Q.1

Sulonen, Mira L.K. et al. "Simultaneous removal of tetrathionate and copper from simulated acidic mining water in bioelectrochemical and electrochemical systems". Hydrometallurgy. 2018, 176. 129-138. https://doi.org/10.1016/j.hydromet.2018.01.023

Alekseev, Alexander et al. "Stable blue phase polymeric Langmuir-Schaefer films based on unsymmetrical hydroxyalkadiynyl N-arylcarbamate derivatives". Thin Solid Films. 2018, 645. 108-118. https://doi.org/10.1016/j.tsf.2017.10.018

Nikkinen, Jari et al. "Sub-100 ps monolithic diamond Raman laser emitting at 573 nm". IEEE Photonics Technology Letters. 2018, 30(11). 981-984. https://doi.org/10.1109/LPT.2018.2806183

Tomberg, Teemu et al. "Sub-parts-per-trillion sensitivity in trace gas detection by cantilever-enhanced photo-acoustic spectroscopy". CLEO: Applications and Technology, CLEO_AT 2018. OSA - The Optical Society. 2018. https://doi.org/10.1364/CLEO_AT.2018.ATh1O.8

Vapaavuori, Jaana, C. Geraldine Bazuin, and Arri Priimagi. "Supramolecular design principles for efficient photoresponsive polymer-azobenzene complexes". Journal of Materials Chemistry C. 2018, 6(9). 2168-2188. https://doi.org/10.1039/c7tc05005d

Achimova, E. et al. "Surface topography studied by off-axis digital holography". Novel Optical Materials and Applications, NOMA 2018. OSA - The Optical Society. 2018. https://doi.org/10.1364/NOMA.2018.NoW1J.7

Bolelli, Giovanni et al. "Tribology of FeVCrC coatings deposited by HVOF and HVAF thermal spray processes". Wear. 2018, 394-395. 113-133. https://doi.org/10.1016/j.wear.2017.10.014

Teisala, Hannu et al. "Ultrafast Processing of Hierarchical Nanotexture for a Transparent Superamphiphobic Coating with Extremely Low Roll-Off Angle and High Impalement Pressure". Advanced Materials. 2018. 30(14). https://doi.org/10.1002/adma.201706529

Saarimaa, Ville et al. "Supercritical carbon dioxide treatment of hot dip galvanized steel as a surface treatment before coating". Surface and Coatings Technology. 2017, 331. 137-142. https://doi.org/10.1016/j.surfcoat.2017.10.047

Lisitsyna, Ekaterina S. et al. "Time-Resolved Fluorescence Spectroscopy Reveals Fine Structure and Dynamics of Poly(l-lysine) and Polyethylenimine Based DNA Polyplexes". Journal of Physical Chemistry B. 2017, 121(48). 10782-10792. https://doi.org/10.1021/acs.jpcb.7b08394

Garifullin, Marsel et al. "Initial in-plane rotational stiffness of welded RHS T joints with axial force in main member". Journal of Constructional Steel Research. 2017, 139. 353-362. https://doi.org/10.1016/j.jcsr.2017.09.033

Santangelo, Paolo E. et al. "Infrared Thermography as a Non-destructive Testing Solution for Thermal Spray Metal Coatings". Journal of Thermal Spray Technology. 2017, 26(8). 1982–1993. https://doi.org/10.1007/s11666-017-0642-6

Tuukkanen, Sampo Nanocellulose as a renewable piezoelectric sensor material. 2017. 1 p.

Sarlin, Essi et al. "Erosive wear of filled vinylester composites in water and acidic media at elevated temperature". Wear. 2017, 390-391. 84-92. https://doi.org/10.1016/j.wear.2017.07.011

Ropo, M., J. Akola and R. O. Jones. "Crystallization of supercooled liquid antimony: A density functional study". Physical Review B. 2017. 96(18). https://doi.org/10.1103/PhysRevB.96.184102

Fedele, Chiara et al. "Azopolymer photopatterning for directional control of angiogenesis". Acta Biomaterialia. 2017, 63. 317-325. https://doi.org/10.1016/j.actbio.2017.09.022

Nikkinen, Jari et al. "Generation of Sub-100 ps Pulses at 532, 355, and 266 nm Using a SESAM Q-Switched Microchip Laser". IEEE Photonics Technology Letters. 2017, 29(21). 1816-1819. https://doi.org/10.1109/LPT.2017.2752421

Holmberg, Kenneth et al. "Global energy consumption due to friction and wear in the mining industry". Tribology International. 2017, 115. 116-139. https://doi.org/10.1016/j.triboint.2017.05.010

Bhavitha, K. B. et al. "Investigating solvent effects on aggregation behaviour, linear and nonlinear optical properties of silver nanoclusters". Optical Materials. 2017, 73. 695-705. https://doi.org/10.1016/j.optmat.2017.09.024

Layek, Rama K. et al. "Noncovalent functionalization of reduced graphene oxide with pluronic F127 and its nanocomposites with gum arabic". Composites Part B : Engineering. 2017, 128. 155-163. https://doi.org/10.1016/j.compositesb.2017.07.010

Jisha, Chandroth P. and Alessandro Alberucci. "Paraxial light beams in structured anisotropic media". Journal of the Optical Society of America A: Optics and Image Science, and Vision. 2017, 34(11). 2019-2024. https://doi.org/10.1364/JOSAA.34.002019

Sethi, Jatin et al. "The effect of multi-wall carbon nanotube morphology on electrical and mechanical properties of polyurethane nanocomposites". Composites Part A: Applied Science and Manufacturing. 2017, 102. 305-313. https://doi.org/10.1016/j.compositesa.2017.08.014

Brobbey, Kofi J. et al. "One-step flame synthesis of silver nanoparticles for roll-to-roll production of antibacterial paper". Applied Surface Science. 2017, 420. 558-565. https://doi.org/10.1016/j.apsusc.2017.05.143

Virtanen, Juhani and Sampo Tuukkanen Multi-material bio-printing facilities. 2017. 1 p.

Valtonen, Kati et al. "Comparison of laboratory wear test results with the in-service performance of cutting edges of loader buckets". Wear. 2017, 388-389. 93-100. https://doi.org/10.1016/j.wear.2017.06.005

Boardman, A. D. et al. "Waves in hyperbolic and double negative metamaterials including rogues and solitons". Nanotechnology. 2017. 28(44). https://doi.org/10.1088/1361-6528/aa6792

Saari, Jesse Atomikerroskasvatusmenetelmällä kasvatetun titaanidioksidikalvon ominaisuudet valosähkökemiallisessa veden hajottamisessa 2017.

Välimäki, Hannu et al. "Fluorimetric oxygen sensor with an efficient optical read-out for in vitro cell models". Sensors and Actuators B: Chemical. 2017, 249. 738-746. https://doi.org/10.1016/j.snb.2017.04.182

Nguyen, H. et al. "Upconversion in low rare-earth concentrated phosphate glasses using direct NaYF4: Er3 +, Yb3 + nanoparticles doping". Scripta Materialia. 2017, 139. 130-133. https://doi.org/10.1016/j.scriptamat.2017.06.050

Heinonen, Saara et al. "Investigation of long-term chemical stability of structured ZnO films in aqueous solutions of varying conditions". Thin Solid Films. 2017, 638. 410-419. https://doi.org/10.1016/j.tsf.2017.07.055

Isakov, M. et al. "Systematic analysis of coating-substrate interactions in the presence of flow localization". Surface and Coatings Technology. 2017, 324. 264-280. https://doi.org/10.1016/j.surfcoat.2017.05.040

Tkalich, Dmitry et al. "Wear of cemented tungsten carbide percussive drill–bit inserts: Laboratory and field study". Wear. 2017, 386-387. 106-117. https://doi.org/10.1016/j.wear.2017.05.010

Javanainen, Matti et al. "Diffusion of Integral Membrane Proteins in Protein-Rich Membranes". Journal of Physical Chemistry Letters. 2017, 8(17). 4308-4313. https://doi.org/10.1021/acs.jpclett.7b01758

Petit, L. et al. "Novel Er3+ doped phosphate glass-ceramics for photonics". ICTON 2017 - 19th International Conference on Transparent Optical Networks. IEEE COMPUTER SOCIETY PRESS. 2017. https://doi.org/10.1109/ICTON.2017.8024877

Laurila, M. M. et al. "Statistical analysis of E-jet print parameter effects on Ag-nanoparticle ink droplet size". Journal of Micromechanics and Microengineering. 2017. 27(9). https://doi.org/10.1088/1361-6439/aa7a71

Virjula, Sanni et al. "The effect of equiaxial stretching on the osteogenic differentiation and mechanical properties of human adipose stem cells". Journal of the Mechanical Behavior of Biomedical Materials. 2017, 72. 38-48. https://doi.org/10.1016/j.jmbbm.2017.04.016

Matikainen, V. et al. "A Study of Cr3C2-Based HVOF- and HVAF-Sprayed Coatings: Microstructure and Carbide Retention". Journal of Thermal Spray Technology. 2017, 26(6). 1-18. https://doi.org/10.1007/s11666-017-0578-x

Pippola, Juha, Tuomas Marttila and Laura Frisk "Development of dust test method for motor drives". 2017 IMAPS Nordic Conference on Microelectronics Packaging, NordPac 2017. IEEE. 2017, 43-46. https://doi.org/10.1109/NORDPAC.2017.7993161

Katkovnik, Vladimir et al. "Computational super-resolution phase retrieval from multiple phase-coded diffraction patterns: Simulation study and experiments". Optica. 2017, 4(7). 786-794. https://doi.org/10.1364/OPTICA.4.000786

Rahaman, Obaidur et al. "Configurational Disorder of Water Hydrogen-Bond Network at the Protein Dynamical Transition". Journal of Physical Chemistry Part B. 2017, 121(28). 6792-6798. https://doi.org/10.1021/acs.jpcb.7b03888

Poikelispää, Minna et al. "Vegetable fillers for electric stimuli responsive elastomers". Journal of Applied Polymer Science. 2017. 134(28). https://doi.org/10.1002/app.45081

Palola, S. et al. "Microwave induced hierarchical nanostructures on aramid fibers and their influence on adhesion properties in a rubber matrix". Applied Surface Science. 2017, 410. 145-153. https://doi.org/10.1016/j.apsusc.2017.03.070

Kaleva, Aaretti et al. "Dissolution-induced nanowire synthesis on hot-dip galvanized surface in supercritical carbon dioxide". Nanomaterials. 2017. 7(7). https://doi.org/10.3390/nano7070181

Antin, Kim Niklas and Tuomas Pärnänen. "Democratizing composites manufacturing -inexpensive tooling empowers new players". SAMPE Journal. 2017, 53(4). 6-10.

Kotilainen, Minna et al. "Hafnium oxide thin films as a barrier against copper diffusion in solar absorbers". Solar Energy Materials and Solar Cells. 2017, 166. 140-146. https://doi.org/10.1016/j.solmat.2017.02.033

Karvinen, Jennika et al. "The production of injectable hydrazone crosslinked gellan gum-hyaluronan-hydrogels with tunable mechanical and physical properties". Journal of the Mechanical Behavior of Biomedical Materials. 2017, 71. 383-391. https://doi.org/10.1016/j.jmbbm.2017.04.006

Luna, E. et al. "The role of epitaxial strain on the spontaneous formation of Bi-rich nanostructures in Ga(As,Bi) epilayers and quantum wells". Nanoscience and Nanotechnology Letters. 2017, 9(7). 1132-1138. https://doi.org/10.1166/nnl.2017.2448

Baek, Jinseok et al. "Long-Range Observation of Exciplex Formation and Decay Mediated by One-Dimensional Bridges". Journal of Physical Chemistry C. 2017, 121(25). 13952-13961. https://doi.org/10.1021/acs.jpcc.7b04483

Amariei, N. et al. "Electrospinning Polyaniline for Sensors". International Conference on Innovative Research - ICIR Euroinvent 2017 25–26 May 2017, Iasi, Romania. IOP Conference Series: Materials Science and Engineering. IOP Publishing. 2017. https://doi.org/10.1088/1757-899X/209/1/012091

Rozemarie, M. L. et al. "Electrospun Based Polyaniline Sensors - A Review". International Conference on Innovative Research - ICIR Euroinvent 2017 25–26 May 2017, Iasi, Romania. IOP Conference Series: Materials Science and Engineering. IOP Publishing. 2017. https://doi.org/10.1088/1757-899X/209/1/012063

Moilanen, Carolina et al. "Influence of strain rate, temperature and fatigue on the radial compression behaviour of Norway spruce". Holzforschung. 2017, 71(6). 505-514. https://doi.org/10.1515/hf-2016-0144

Böttrich, Marcel, Jarno M.A. Tanskanen, and Jari A.K. Hyttinen. "Lead field theory provides a powerful tool for designing microelectrode array impedance measurements for biological cell detection and observation". BioMedical Engineering Online. 2017. 16(1). https://doi.org/10.1186/s12938-017-0372-5

Ahmed, Umair et al. Finite element method incorporating coupled magneto-elastic model for magneto-mechanical energy harvester. 2017. 2 p.

Kiilakoski, Jarkko et al. "Cavitation wear characteristics of Al2O3-ZrO2-ceramic coatings deposited by APS and HVOF -processes". Internationl Thermal Spray Conference ITSC 2017, Conference Proceedings: June 7-9, 2017, Düsseldorf, Germany.. DVS-Berichte / DVS - Deutscher Verband für Schweißen und Verwandte Verfahren e.V.. Düsseldorf: DVS Media GmbH. 2017, 928-933.

Putaala, Jussi et al. "Capability assessment of inkjet printing for reliable RFID applications". IEEE Transactions on Device and Materials Reliability. 2017, 17(2). 281-290. https://doi.org/10.1109/TDMR.2016.2636342

Railanmaa, Anna, Suvi Lehtimäki, and Donald Lupo. "Comparison of starch and gelatin hydrogels for non-toxic supercapacitor electrolytes". Applied Physics A-Materials Science and Processing. 2017. 123(6). https://doi.org/10.1007/s00339-017-1068-1

Schoerling, Daniel et al. "Considerations on a Cost Model for High-Field Dipole Arc Magnets for FCC". IEEE Transactions on Applied Superconductivity. 2017. 27(4). https://doi.org/10.1109/TASC.2017.2657510

Stoykova, Elena et al. "Dynamic speckle analysis with smoothed intensity-based activity maps". Optics and Lasers in Engineering. 2017, 93. 55-65. https://doi.org/10.1016/j.optlaseng.2017.01.012

Annila, Petri J. et al. "Extent of moisture and mould damage in structures of public buildings". Case Studies in Construction Materials. 2017, 6. 103-108. https://doi.org/10.1016/j.cscm.2017.01.003

Kirby, Glyn A. et al. "First Cold Powering Test of REBCO Roebel Wound Coil for the EuCARD2 Future Magnet Development Project". IEEE Transactions on Applied Superconductivity. 2017. 27(4). https://doi.org/10.1109/TASC.2017.2653204

Murtomaki, Jaakko S. et al. "Mechanical Effects of the Nonuniform Current Distribution on HTS Coils for Accelerators Wound With REBCO Roebel Cable". IEEE Transactions on Applied Superconductivity. 2017. 27(4). https://doi.org/10.1109/TASC.2017.2665882

Marinozzi, Vittorio et al. "Quench Protection Study of the Eurocircol 16 T cosθ Dipole for the Future Circular Collider (FCC)". IEEE Transactions on Applied Superconductivity. 2017. 27(4). https://doi.org/10.1109/TASC.2017.2656156

Salmi, Tiina et al. "Suitability of Different Quench Protection Methods for a 16 T Block-Type Nb3Sn Accelerator Dipole Magnet". IEEE Transactions on Applied Superconductivity. 2017. 27(4). https://doi.org/10.1109/TASC.2017.2651386

Tommasini, Davide et al. "The 16 T Dipole Development Program for FCC". IEEE Transactions on Applied Superconductivity. 2017. 27(4). https://doi.org/10.1109/TASC.2016.2634600

Ma, Li, Kari Laasonen, and Jaakko Akola. "Catalytic Activity of AuCu Clusters on MgO(100): Effect of Alloy Composition for CO Oxidation". Journal of Physical Chemistry C. 2017, 121(20). 10876-10886. https://doi.org/10.1021/acs.jpcc.6b12054

Goh, Jing-Qiang, Jaakko Akola and Riccardo Ferrando. "Geometric Structure and Chemical Ordering of Large AuCu Clusters: A Computational Study". Journal of Physical Chemistry C. 2017, 121(20). 10809-10816. https://doi.org/10.1021/acs.jpcc.6b11958

Piccardi, A. et al. "Nematicon-enhanced spontaneous symmetry breaking". Molecular Crystals and Liquid Crystals. 2017, 649(1). 59-65. https://doi.org/10.1080/15421406.2017.1303916

He, Han et al. "Fabrication and performance evaluation of 3D-printed graphene passive UHF RFID tags on cardboard". 2017 Progress in Electromagnetics Research Symposium - Spring, PIERS 2017. IEEE. 2017, 3322-3325. https://doi.org/10.1109/PIERS.2017.8262330

Chen, Xiaochen et al. "Two-part stretchable passive UHF RFID textile tags". 2017 Progress in Electromagnetics Research Symposium - Spring, PIERS 2017. Electromagnetics Academy. 2017, 3318-3321. https://doi.org/10.1109/PIERS.2017.8262329

Golda-Cepa, Monika et al. "Molecular Dynamics Insights into Water-Parylene C Interface: Relevance of Oxygen Plasma Treatment for Biocompatibility". ACS Applied Materials and Interfaces. 2017, 9(19). 16685-16693. https://doi.org/10.1021/acsami.7b03265

Sarlin, Essi et al. "The effect of matrix type on ageing of thick vinyl ester glass-fibre-reinforced laminates". Composite Structures. 2017, 168. 840–850. https://doi.org/10.1016/j.compstruct.2017.02.086

Virkki, Kirsi et al. "Photoinduced Electron Injection from Zinc Phthalocyanines into Zinc Oxide Nanorods: Aggregation Effects". Journal of Physical Chemistry C. 2017, 121(17). 9594-9605. https://doi.org/10.1021/acs.jpcc.7b01562

Mentink, M. and T Salmi. "Quench absorption coils: A quench protection concept for high-field superconducting accelerator magnets". Superconductor Science and Technology. 2017. 30(6). https://doi.org/10.1088/1361-6668/aa6678

Ojala, Niko Application Oriented Wear Testing of Wear Resistant Steels in Mining Industry Tampere University of Technology. Publication. Tampere University of Technology. 2017.

Sankaran, Shrikrishnan et al. "Cell Adhesion on Dynamic Supramolecular Surfaces Probed by Fluid Force Microscopy-Based Single-Cell Force Spectroscopy". ACS Nano. 2017, 11(4). 3867-3874. https://doi.org/10.1021/acsnano.7b00161

Saccone, Marco et al. "Halogen bonding stabilizes a cis-azobenzene derivative in the solid state: A crystallographic study". ACTA CRYSTALLOGRAPHICA SECTION B : STRUCTURAL SCIENCE, CRYSTAL ENGINEERING AND MATERIALS. 2017, 73(2). 227-233. https://doi.org/10.1107/S2052520617003444

Koivisto, Janne T. et al. "Bioamine-crosslinked gellan gum hydrogel for neural tissue engineering". Biomedical Materials. 2017. 12(2). https://doi.org/10.1088/1748-605X/aa62b0

Virtanen, Heikki, Topi Uusitalo and Mihail Dumitrescu. "Simulation studies of DFB laser longitudinal structures for narrow linewidth emission". Optical and Quantum Electronics. 2017. 49(4). https://doi.org/10.1007/s11082-017-0993-8

Lopez-Iscoa, Pablo et al. "Effect of the addition of Al2O3, TiO2 and ZnO on the thermal, structural and luminescence properties of Er3+-doped phosphate glasses". Journal of Non-Crystalline Solids. 2017, 460. 161-168. https://doi.org/10.1016/j.jnoncrysol.2017.01.030

Milani, Roberto et al. "Hierarchical Self-Assembly of Halogen-Bonded Block Copolymer Complexes into Upright Cylindrical Domains". CheM. 2017, 2(3). 417-426. https://doi.org/10.1016/j.chempr.2017.02.003

Rojas-Cervellera, Víctor et al. "The molecular mechanism of the ligand exchange reaction of an antibody against a glutathione-coated gold cluster". Nanoscale. 2017, 9(9). 3121-3127. https://doi.org/10.1039/c6nr08498b

Mashayekhi, Mohammad et al. "Chip-by-chip configurable interconnection using digital printing techniques". Journal of Micromechanics and Microengineering. 2017. 27(4). https://doi.org/10.1088/1361-6439/aa5ef3

Kuzmin, Mikhail et al. "Investigation of the structural anisotropy in a self-assembling glycinate layer on Cu(100) by scanning tunneling microscopy and density functional theory calculations". Applied Surface Science. 2017, 409. 111-116. https://doi.org/10.1016/j.apsusc.2017.03.005

Kosunen, Marko et al. "13.5 A 0.35-to-2.6GHz multilevel outphasing transmitter with a digital interpolating phase modulator enabling up to 400MHz instantaneous bandwidth". 2017 IEEE International Solid-State Circuits Conference, ISSCC 2017. IEEE. 2017, 224-225. https://doi.org/10.1109/ISSCC.2017.7870342

Polley, Anirban et al. "Glycosylation and Lipids Working in Concert Direct CD2 Ectodomain Orientation and Presentation". Journal of Physical Chemistry Letters. 2017, 8(5). 1060-1066. https://doi.org/10.1021/acs.jpclett.6b02824

Selim, Bassant et al. "The effects of I/Q imbalance on wireless communications: A survey". 2016 IEEE 59th International Midwest Symposium on Circuits and Systems (MWSCAS). IEEE. 2017. https://doi.org/10.1109/MWSCAS.2016.7870102

Laurila, Mika-Matti, Behnam Khorramdel, and Matti Mäntysalo. "Combination of E-jet and inkjet printing for additive fabrication of multilayer high-density RDL of silicon interposer". IEEE Transactions on Electron Devices. 2017, 64(3). 1217-1224. https://doi.org/10.1109/TED.2016.2644728

Lappalainen, Kari and Seppo Valkealahti. "Effects of PV array layout, electrical configuration and geographic orientation on mismatch losses caused by moving clouds". Solar Energy. 2017, 144. 548-555. https://doi.org/10.1016/j.solener.2017.01.066

Karhu, M. et al. "Reaction heat utilization in aluminosilicate-based ceramics synthesis and sintering". Journal of Ceramic Science and Technology. 2017, 8(1). 101-112. https://doi.org/10.4416/JCST2016-00094

Valtonen, Kati. "Materiaaleja haastaviin kulumisolosuhteisiin". Materia. 2017, (1). 50.

Heinonen, S. et al. "Structured ZnO films: Effect of copper nitrate addition to precursor solution on topography, band gap energy and photocatalytic activity". IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING. 2017. 175(1). https://doi.org/10.1088/1757-899X/175/1/012042

Kaleva, A. et al. "Synthesis and crystallization of titanium dioxide in supercritical carbon dioxide (scCO2)". IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING. 2017. 175(1). https://doi.org/10.1088/1757-899X/175/1/012034

Ruuskanen, J. et al. "Electromagnetic nonlinearities in a Roebel-cable-based accelerator magnet prototype: Variational approach". Superconductor Science and Technology. 2017. 30(2). https://doi.org/10.1088/1361-6668/30/2/024008

Pavelescu, E. M. et al. "Very high dose electron irradiation effects on photoluminescence from GaInNAs/GaAs quantum wells grown by molecular beam epitaxy". Optical Materials. 2017, 64. 361-365. https://doi.org/10.1016/j.optmat.2016.12.007

Köliö, Arto et al. "The corrosion rate in reinforced concrete facades exposed to outdoor environment". Materials and Structures. 2017. 50(23). https://doi.org/10.1617/s11527-016-0920-7

Magarkar, Aniket et al. "Increased Binding of Calcium Ions at Positively Curved Phospholipid Membranes". Journal of Physical Chemistry Letters. 2017, 8(2). 518-523. https://doi.org/10.1021/acs.jpclett.6b02818

Natarajan, Tamil Selvan et al. "Strong Strain Sensing Performance of Natural Rubber Nanocomposites". ACS Applied Materials and Interfaces. 2017, 9(5). 4860-4872. https://doi.org/10.1021/acsami.6b13074

Kovács, Péter Tamás et al. "Architectures and codecs for real-time light field streaming". Journal of Imaging Science and Technology. 2017. 61(1). https://doi.org/10.2352/J.ImagingSci.Technol.2017.61.1.010403

Matikainen, Ville et al. "Cavitation erosion, slurry erosion and solid particle erosion performance of metal matrix composite (MMC) coatings sprayed with modern high velocity thermal spray processes". Materials Science and Technology Conference and Exhibition 2017, MS and T 2017: October 8-12, 2017, Pittsburgh, Pennsylvania USA. Association for Iron and Steel Technology, AISTECH. 2017, 1161-1163.

Morantes, Sandra J. et al. "Composites of hydrogels and nanoparticles: A potential solution to current challenges in buccal drug delivery". Biopolymer-Based Composites: Drug Delivery and Biomedical Applications. Woodhead Publishing. 2017, 107-138. https://doi.org/10.1016/B978-0-08-101914-6.00005-3

Casula, Riccardo et al. "Continuous-wave, cascaded raman laser at 1.3, 1.5, and 1.7 μm". The European Conference on Lasers and Electro-Optics, CLEO_Europe 2017. Optics InfoBase Conference Papers. OSA - The Optical Society. 2017.

Suokas, Esa "Effect of air gap on the adhesion of PET layer on cardboard substrate in extrusion coating". 16th TAPPI European PLACE Conference 2017. TAPPI Press. 2017, 529-544.

Lahti, Johanna, Taina Kamppuri, and Jurkka Kuusipalo "Novel bio-based materials for active and intelligent packaging". 16th TAPPI European PLACE Conference 2017. TAPPI Press. 2017.

Lahti, Johanna "Novel equipment to simulate hot air heat sealability of packaging materials". 16th TAPPI European PLACE Conference 2017. TAPPI Press. 2017, 237-248.

Kuusipalo, Jurkka and Johanna Lahti "Tampere University of Technology, laboratory of materials science, paper converting and packaging technology Tampere, Finland". 16th TAPPI European PLACE Conference 2017: Basel; Switzerland; 22 May 2017 through 24 May 2017. TAPPI Press. 2017.

Isotahdon, Elisa, Elina Huttunen-Saarivirta, and Veli Kuokkala. "Characterization of the microstructure and corrosion performance of Ce-alloyed Nd-Fe-B magnets". Journal of Alloys and Compounds. 2017, 692. 190-197. https://doi.org/10.1016/j.jallcom.2016.09.058

Poikelispää, Minna et al. "High actuation performance offered by simple diene rubbers". Polymers for Advanced Technologies. 2017, 28(1). 130-136. https://doi.org/10.1002/pat.3867

Viheriälä, Jukka et al. 1180 nm GaInNAs quantum well based high power DBR laser diodes. 2017.

Sarjas, Heikki et al. "Abrasive-Erosive Wear of Thermally Sprayed Coatings from Experimental and Commercial Cr3C2-Based Powders". Journal of Thermal Spray Technology. 2017, 26(8). 2020–2029. https://doi.org/10.1007/s11666-017-0638-2

Hyysalo, Anu et al. "Aligned Poly(ε-caprolactone) Nanofibers Guide the Orientation and Migration of Human Pluripotent Stem Cell-Derived Neurons, Astrocytes, and Oligodendrocyte Precursor Cells In Vitro". MACROMOLECULAR BIOSCIENCE. 2017. 17(7). https://doi.org/10.1002/mabi.201600517

Filippov, Valery et al. "Anisotropic ultra-large mode area Yb-doped tapered double clad fiber for ultrafast amplifiers". Advanced Solid State Lasers 2017: Nagoya, Aichi Japan 1–5 October 2017. The Optical Society; OSA. 2017. https://doi.org/10.1364/ASSL.2017.JTu2A.51

Mal, Joyabrata et al. "Biosynthesis of CdSe nanoparticles by anaerobic granular sludge". Environmental Science: Nano. 2017, 4(4). 824-833. https://doi.org/10.1039/c6en00623j

Katkovnik, Vladimir et al. "Computational wavelength resolution for in-line lensless holography: Phase-coded diffraction patterns and wavefront group-sparsity". Digital Optical Technologies 2017. Proceedings of SPIE. SPIE. 2017. https://doi.org/10.1117/12.2269327

Fabert, M. et al. "Crystallization and sintering of borosilicate bioactive glasses for application in tissue engineering". Journal of Materials Chemistry B. 2017, 5(23). 4514-4525. https://doi.org/10.1039/c7tb00106a

Härkäsalmi, Tiina et al. "Design-driven integrated development of technical and perceptual qualities in foam-formed cellulose fibre materials". Cellulose. 2017, 24(11). 5053–5068. https://doi.org/10.1007/s10570-017-1484-6

Kordmahaleh, Aidin Alinezhad et al. "Design of a 25 MWe Solar Thermal Power Plant in Iran with Using Parabolic Trough Collectors and a Two-Tank Molten Salt Storage System". International Journal of Photoenergy. 2017. 2017. https://doi.org/10.1155/2017/4210184

Arffman, A. et al. "Differential diffusion analyzer". Aerosol Science and Technology. 2017, 51(12). 1429-1437. https://doi.org/10.1080/02786826.2017.1367089

Wang, Xiaoju et al. "Do properties of bioactive glasses exhibit mixed alkali behavior?". Journal of Materials Science. 2017, 52(15). 8986–8997. https://doi.org/10.1007/s10853-017-0915-y

Stoykova, Elena et al. "Dynamic laser speckle metrology with binarization of speckle patterns". 19th International Conference and School on Quantum Electronics: Laser Physics and Applications. Proceedings of SPIE. SPIE. 2017. https://doi.org/10.1117/12.2262330

Ojala, Niko et al. "Edge and particle embedment effects in low- and high-stress slurry erosion wear of steels and elastomers". Wear. 2017, 388-389. 126-135. https://doi.org/10.1016/j.wear.2017.06.004

Haiko, O. et al. "Effect of finish rolling and quench stop temperatures on impact-abrasive wear resistance of 0.35 % carbon direct-quenched steel". Tribologia. 2017, 35(1-2). 5-21.

Khorramdel, Behnam, Altti Torkkeli, and Matti Mäntysalo. "Electrical Contacts in SOI MEMS Using Aerosol Jet Printing". IEEE Journal of the Electron Devices Society. 2017, 6. 34-40. https://doi.org/10.1109/JEDS.2017.2764498

Bomberg, Malin et al. "Evaluation of long-term post process inactivation of bioleaching microorganisms". 22nd International Biohydrometallurgy Symposium. Solid State Phenomena. Trans Tech Publications Ltd. 2017, 57-60. https://doi.org/10.4028/www.scientific.net/SSP.262.57

Markova, Ekaterina et al. "Flexible Spectrum Management in a Smart City within Licensed Shared Access Framework". IEEE Access. 2017, 5. 22252-22261. https://doi.org/10.1109/ACCESS.2017.2758840

Mojica, Edson, Said Pertuz and Henry Arguello. "High-resolution coded-aperture design for compressive X-ray tomography using low resolution detectors". Optics Communications. 2017, 404. 103-109. https://doi.org/10.1016/j.optcom.2017.06.053

Janka, L. et al. "HVOF- and HVAF-Sprayed Cr3C2-NiCr Coatings Deposited from Feedstock Powders of Spherical Morphology: Microstructure Formation and High-Stress Abrasive Wear Resistance Up to 800 °C". Journal of Thermal Spray Technology. 2017, 26(7). 1720–1731. https://doi.org/10.1007/s11666-017-0621-y

Vuori, Leena et al. "Improved corrosion properties of Hot Dip Galvanized Steel by nanomolecular silane layers as hybrid interface between zinc and top coatings". Corrosion. 2017. 73(2). https://doi.org/10.5006/2206

Mäkelä, Jyrki M. et al. "Liquid flame spray—a hydrogen-oxygen flame based method for nanoparticle synthesis and functional nanocoatings". KONA POWDER AND PARTICLE JOURNAL. 2017, 2017(34). 141-154. https://doi.org/10.14356/kona.2017020

Oksanen, V. T., A. J. Lehtovaara and M. H. Kallio. "Load capacity of lubricated bismuth bronze bimetal bearing under elliptical sliding motion". Wear. 2017, 388-389. 72-80. https://doi.org/10.1016/j.wear.2017.05.001

Zhao, Junjie et al. "Mechanical behavior of a 16 T FCC dipole magnet during a quench". IEEE Transactions on Applied Superconductivity. 2017. 27(6). https://doi.org/10.1109/TASC.2017.2721974

Ometov, Aleksandr et al. "Mobile Social Networking under Side-Channel Attacks: Practical Security Challenges". IEEE Access. 2017, 5. 2591-2601. https://doi.org/10.1109/ACCESS.2017.2665640

Ometov, Aleksandr et al. "Modeling Unreliable Operation of mmWave-based Data Sessions in Mission-Critical PPDR Services". IEEE Access. 2017, 5. 20536-20544. https://doi.org/10.1109/ACCESS.2017.2756690

Gumenyuk, Regina et al. "New multisoliton complex in Bi-doped fiber laser operated at 1450 nm". European Quantum Electronics Conference 2017. The Optical Society; OSA. 2017.

Salpavaara, Timo et al. "Non-destructive and wireless monitoring of biodegradable polymers". Sensors and Actuators B: Chemical. 2017, 251. 1018-1025. https://doi.org/10.1016/j.snb.2017.05.116

Lindroos, Matti et al. "On the effect of deformation twinning and microstructure to strain hardening of high manganese austenitic steel 3D microstructure aggregates at large strains". International Journal of Solids and Structures. 2017, 125. 68-76. https://doi.org/10.1016/j.ijsolstr.2017.07.015

Lampio, Kaj and Reijo Karvinen. "Optimization of convectively cooled heat sinks". Microelectronics Reliability. 2017, 79. 473-479. https://doi.org/10.1016/j.microrel.2017.06.011

Taddeo, Raffaele, Sumitra Prajapati and Raghida Lepistö. "Optimizing ammonium adsorption on natural zeolite for wastewaters with high loads of ammonium and solids". Journal of Porous Materials. 2017, 24(6). 1545–1554. https://doi.org/10.1007/s10934-017-0394-1

Karjalainen, Panu et al. "Performance of ventilation filtration technologies on characteristic traffic related aerosol down to nanocluster size". Aerosol Science and Technology. 2017, 51(12). 1398-1408. https://doi.org/10.1080/02786826.2017.1356904

Baek, Jinseok et al. "Photophysical properties of porphyrin dimer-single-walled carbon nanotube linked systems". Journal of Physical Chemistry C. 2017. 121(39). https://doi.org/10.1021/acs.jpcc.7b08594

Filippov, Valery et al. "Picosecond MOPA with ytterbium doped tapered double clad fiber". Fiber Lasers XIV: Technology and Systems. Proceedings of SPIE; 10083. SPIE. 2017. https://doi.org/10.1117/12.2252006

Borges, Lucas R. et al. "Pipeline for effective denoising of digital mammography and digital breast tomosynthesis". Medical Imaging 2017: Physics of Medical Imaging. Progress in biomedical optics and imaging. SPIE. 2017. https://doi.org/10.1117/12.2255058

Vinha, Juha and Henna Kivioja, ed. Rakennusfysiikka 2017. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut: 24.-26.10.2017, Tampere. Seminaarijulkaisu 5 - Osa 1 Tampere: Tampereen teknillinen yliopisto, Rakennustekniikka, Rakennusfysiikka. 2017.

Vinha, Juha and Henna Kivioja, ed. Rakennusfysiikka 2017. Uusimmat tutkimustulokset ja hyvät käytännön ratkaisut: 24.-26.10.2017, Tampere. Seminaarijulkaisu 5 - Osa 2 Tampere: Tampereen teknillinen yliopisto, Rakennustekniikka, Rakennusfysiikka. 2017.

Chen, Liang et al. "Robustness, Security and Privacy in Location-Based Services for Future IoT: A Survey". IEEE Access. 2017, 5. 8956-8977. https://doi.org/10.1109/ACCESS.2017.2695525

Jain, Rohan et al. "Shape change of biogenic elemental selenium nanomaterials from nanospheres to nanorods decreases their colloidal stability". Environmental Science: Nano. 2017, 4(5). 1054-1063. https://doi.org/10.1039/c7en00145b

Matikainen, V. et al. "Sliding wear behaviour of HVOF and HVAF sprayed Cr3C2-based coatings". Wear. 2017, 388-389. 57-71. https://doi.org/10.1016/j.wear.2017.04.001

Kolesnik, Sergei et al. "Solar Irradiation Independent Expression for Photovoltaic Generator Maximum Power Line". IEEE Journal of Photovoltaics. 2017, 7(5). 1416-1420. https://doi.org/10.1109/JPHOTOV.2017.2713404

Mathlouthi, Maha et al. "Structural characterization, spectroscopic, thermal, AC conductivity and dielectric properties and antimicrobial studies of (C8H12N)2[SnCl6]". PHASE TRANSITIONS. 2017, 90(4). 399-414. https://doi.org/10.1080/01411594.2016.1212194

Koivuluoto, Heli et al. "Structures and properties of laser-assisted cold-sprayed aluminum coatings". THERMEC 2016. Materials Science Forum. Trans Tech Publications Ltd. 2017, 984-989. https://doi.org/10.4028/www.scientific.net/MSF.879.984

Wang, Yicheng et al. "Sub-10 optical-cycle mode-locked Tm:(Lu2/3Sc1/3)2O3 mixed ceramic laser at 2057 nm". Advanced Solid State Lasers 2017: Nagoya, Aichi Japan 1–5 October 2017. The Optical Society; OSA. 2017. https://doi.org/10.1364/ASSL.2017.ATu6A.4

Lahbib, Ikram et al. "Synthesis, Structural Characterization, Hirshfeld Surface and Antioxidant Activity Analysis of a Novel Organic Cation Antimonate Complex". Journal of Cluster Science. 2017, 28(4). 2239–2252. https://doi.org/10.1007/s10876-017-1217-x

Petrov, Vitaly et al. "Terahertz Band Intra-Chip Communications: Can Wireless Links Scale Modern x86 CPUs?". IEEE Access. 2017, 5. 6095-6109. https://doi.org/10.1109/ACCESS.2017.2689077

Koivuluoto, Heli and Ulla Kanerva. "Termisellä ruiskutuksella monitoiminnallisia pinnoiteratkaisuja vaativiin teollisuuden käyttökohteisiin". Hitsaustekniikka. 2017, 1. 17-19.

Morandi, Antonio et al. "The 5th international workshop on numerical modelling of high temperature superconductors". Superconductor Science and Technology. 2017. 30(8). https://doi.org/10.1088/1361-6668/aa7676

Mishra, A. et al. "Thermal, structural and in vitro dissolution of antimicrobial copper-doped and slow resorbable iron-doped phosphate glasses". Journal of Materials Science. 2017, 52(15). 8957–8972. https://doi.org/10.1007/s10853-017-0805-3

Hintikka, Jouko, Arto Lehtovaara and Antti Mäntylä. "Third Particle Ejection Effects on Wear with Quenched and Tempered Steel Fretting Contact". TRIBOLOGY TRANSACTIONS. 2017, 60(1). 70-78. https://doi.org/10.1080/10402004.2016.1146813

Laudyn, Urszula A. et al. "Three-color vector nematicon". Photonics Letters of Poland. 2017, 9(2). 36-38. https://doi.org/10.4302/plp.v9i2.718

Javanainen, Matti et al. "Two cations, two mechanisms: Interactions of sodium and calcium with zwitterionic lipid membranes". Chemical Communications. 2017, 53(39). 5380-5383. https://doi.org/10.1039/c7cc02208e

Noronen, Teppo et al. "Ultrafast picosecond MOPA with Yb-doped tapered double clad fiber". The European Conference on Lasers and Electro-Optics 2017: Munich Germany 25–29 June 2017. The Optical Society; OSA. 2017.

Tuominen, Mikko et al. "Superamphiphobic overhang structured coating on a biobased material". Applied Surface Science. 2016, 389. 135-143. https://doi.org/10.1016/j.apsusc.2016.05.095

Hannula, Markku Kalevi et al. Thermal Modification of ALD Grown Titanium Oxide Ultra Thin Film for Photoanode Applications. 2016.

Assanto, Gaetano and Noel F. Smyth. "Nonlinear guided waves: Preface". Journal of Nonlinear Optical Physics and Materials. 2016. 25(4). https://doi.org/10.1142/S0218863516500417

Kamppuri, Taina et al. "Characterization of endoglucanase rich Trichoderma reesei cellulase mixtures and their effect on alkaline solubility of dissolving pulp". Cellulose. 2016, 23(6). 3901–3911. https://doi.org/10.1007/s10570-016-1055-2

Järveläinen, Matti et al. "Compression curve analysis and compressive strength measurement of brittle granule beds in lieu of individual granule measurements". Particuology. 2016, 29. 60-68. https://doi.org/10.1016/j.partic.2015.10.006

Pammo, Arno et al. Biomaterials for Electronics. 2016. 1 p.

Lappalainen, Kari and Seppo Valkealahti. "Apparent velocity of shadow edges caused by moving clouds". Solar Energy. 2016, 138. 47-52. https://doi.org/10.1016/j.solener.2016.09.008

Carfora, D. et al. "Multicriteria selection in concept design of a divertor remote maintenance port in the EU DEMO reactor using an AHP participative approach". Fusion Engineering and Design. 2016, 112. 324-331. https://doi.org/10.1016/j.fusengdes.2016.08.023

Varis, T. et al. "Optimization of HVOF Cr3C2-NiCr coating for increased fatigue performance". Surface and Coatings Technology. 2016, 305. 123-131. https://doi.org/10.1016/j.surfcoat.2016.08.012

Poikelispää, Minna et al. "Improvement of actuation performance of dielectric elastomers by barium titanate and carbon black fillers". Journal of Applied Polymer Science. 2016. 133(42). https://doi.org/10.1002/app.44116

Acar, Erman, Sari Peltonen and Ulla Ruotsalainen. "Adaptive multiresolution method for MAP reconstruction in electron tomography". Ultramicroscopy. 2016, 170. 24-34. https://doi.org/10.1016/j.ultramic.2016.08.002

Juoksukangas, Janne, Arto Lehtovaara and Antti Mäntylä. "Experimental and numerical investigation of fretting fatigue behavior in bolted joints". Tribology International. 2016, 103. 440-448. https://doi.org/10.1016/j.triboint.2016.07.021

Ojala, Niko Application oriented wear testing of wear resistant steels in mining industry. 2016.

Neri, M. et al. "Experimental and Computational Study of the Temperatures Field Around a Chimney Roof Penetration". Fire Technology. 2016, 52(6). 1799–1823. https://doi.org/10.1007/s10694-015-0540-8

Ali-Löytty, Harri et al. "Grain orientation dependent Nb-Ti microalloying mediated surface segregation on ferritic stainless steel". Corrosion Science. 2016, 112. 204-213. https://doi.org/10.1016/j.corsci.2016.07.024

Järvinen, Henri et al. "The effect of initial microstructure on the final properties of press hardened 22MnB5 steels". Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing. 2016, 676. 109-120. https://doi.org/10.1016/j.msea.2016.08.096

Ärrälä, Minna et al. "Laser angle-resolved photoemission as a probe of initial state kz dispersion, final-state band gaps, and spin texture of Dirac states in the Bi2 Te3 topological insulator". Physical Review B. 2016. 94(15). https://doi.org/10.1103/PhysRevB.94.155144

Kalikka, J., J. Akola and R. O. Jones. "Crystallization processes in the phase change material Ge2 Sb2 Te5: Unbiased density functional/molecular dynamics simulations". Physical Review B. 2016. 94(13). https://doi.org/10.1103/PhysRevB.94.134105

Lindgren, M. et al. "Erosion–corrosion resistance of various stainless steel grades in high-temperature sulfuric acid solution". Wear. 2016, 364-365. 10-21. https://doi.org/10.1016/j.wear.2016.06.007

Will, Olga Maria et al. "Increased survival rate by local release of diclofenac in a murine model of recurrent oral carcinoma". International Journal of Nanomedicine. 2016, 11. 5311-5321. https://doi.org/10.2147/IJN.S109199

Juoksukangas, J., A. Lehtovaara and A. Mäntylä. "A comparison of relative displacement fields between numerical predictions and experimental results in fretting contact". Proceedings of the institution of Mechanical Engineers Part J: Journal of Engineering Tribology. 2016, 230(10). 1273-1287. https://doi.org/10.1177/1350650116633573

Lappalainen, Kari and Seppo Valkealahti. "Analysis of shading periods caused by moving clouds". Solar Energy. 2016, 135. 188-196. https://doi.org/10.1016/j.solener.2016.05.050

Heinonen, Saara et al. "Photocatalytic and antibacterial properties of ZnO films with different surface topographies on stainless steel substrate". Thin Solid Films. 2016, 616. 842-849. https://doi.org/10.1016/j.tsf.2016.10.002

Myllymäki, Sami et al. "RF measurements to pinpoint defects in inkjet-printed, thermally and mechanically stressed coplanar waveguides". Microelectronics Reliability. 2016, 65. 142-150. https://doi.org/10.1016/j.microrel.2016.08.021

Paajanen, Antti et al. "Atomistic molecular dynamics simulations on the interaction of TEMPO-oxidized cellulose nanofibrils in water". Cellulose. 2016, 23(6). 3449–3462. https://doi.org/10.1007/s10570-016-1076-x

Kylänpää, I. et al. "Thermal effects on the Wigner localization and Friedel oscillations in many-electron nanowires". Physical Review B. 2016. 94(11). https://doi.org/10.1103/PhysRevB.94.115417

Robison, Aaron D. et al. "Polyarginine Interacts More Strongly and Cooperatively than Polylysine with Phospholipid Bilayers". Journal of Physical Chemistry Part B. 2016, 120(35). 9287-9296. https://doi.org/10.1021/acs.jpcb.6b05604

Pilehrood, Mohammad Kazemi et al. "3D micro-nano structured hybrid scaffolds: An investigation into the role of nanofiber coating on viability, proliferation and differentiation of seeded mesenchymal stem cells". Journal Nanoscience and Nanotechnology. 2016, 16(9). 9000-9007. https://doi.org/10.1166/jnn.2016.12740

Lindgren, M., S. Santa-aho, and M. Vippola. "Barkhausen noise response of three different welded duplex stainless steels". Insight. 2016, 58(9). 480-486. https://doi.org/10.1784/insi.2016.58.9.480

Varghese, Oommen P. et al. "Chondroitin sulfate derived theranostic nanoparticles for targeted drug delivery". Biomaterials Science. 2016, 4(9). 1310-1313. https://doi.org/10.1039/c6bm00335d

Räisänen, Ville, Saku Suuriniemi and Lauri Kettunen. "Generalized slip transformations and air-gap harmonics in field models of electrical machines". IEEE Transactions on Magnetics. 2016. 52(9). https://doi.org/10.1109/TMAG.2016.2561907

Akbari, M. et al. "Toward Graphene-Based Passive UHF RFID Textile Tags: A Reliability Study". IEEE Transactions on Device and Materials Reliability. 2016, 16(3). 429-431. https://doi.org/10.1109/TDMR.2016.2582261

Lenk, Kerstin et al. "Simulation of developing human neuronal cell networks". BioMedical Engineering Online. 2016. 15(1). https://doi.org/10.1186/s12938-016-0226-6

Moltchanov, Dmitri et al. "Statistical traffic properties and model inference for shared cache interface in multi-core CPUs". IEEE Access. 2016, 4. 4829-4839. https://doi.org/10.1109/ACCESS.2016.2603169

Blokhin, S. A. et al. 1.3 μm InAs quantum dot semiconductor disk laser. 2016. https://doi.org/10.1109/LO.2016.7549727

Korobko, D. A. et al. Advanced scheme of amplifier similariton laser. 2016. https://doi.org/10.1109/LO.2016.7549889

Ustimchik, V. E. et al. State of polarization in anisotronic tapered fiber with extremely large core diameter. 2016. https://doi.org/10.1109/LO.2016.7549956

Stöckelhuber, Klaus Werner, Amit Das and Manfred Klüppel, ed. Designing of Elastomer Nanocomposites: From Theory to Application Advances in Polymer Science. Springer International Publishing. 2016. https://doi.org/10.1007/978-3-319-47696-4

Basu, Debdipta et al. "Nanostructured Ionomeric Elastomers"., Stöckelhuber, Klaus Werner Das, Amit Klüppel, Manfred (editors). Designing of Elastomer Nanocomposites: From Theory to Applications. Advances in Polymer Science. Springer International Publishing. 2016, 235-266. https://doi.org/10.1007/12_2016_8

Dumitrescu, M. et al. "Simulation of photon-photon resonance enhanced direct modulation bandwidth of DFB lasers". 16th International Conference on Numerical Simulation of Optoelectronic Devices, NUSOD 2016. IEEE. 2016, 147-148. https://doi.org/10.1109/NUSOD.2016.7547075

Virtanen, Heikki, Topi Uusitalo and Mihail Dumitrescu "Simulation studies of DFB laser longitudinal structures for narrow linewidth emission". 16th International Conference on Numerical Simulation of Optoelectronic Devices, NUSOD 2016. IEEE. 2016, 153-154. https://doi.org/10.1109/NUSOD.2016.7547078

Uusitalo, Topi, Heikki Virtanen and Mihail Dumitrescu "Transverse structure optimization of laterally-coupled ridge waveguide DFB lasers". 16th International Conference on Numerical Simulation of Optoelectronic Devices, NUSOD 2016. IEEE. 2016, 79-80. https://doi.org/10.1109/NUSOD.2016.7547038

Mostofizadeh, M. et al. "Effect of Epoxy Flux Underfill on Thermal Cycling Reliability of Sn-8Zn-3Bi Lead-Free Solder in a Sensor Application". Proceedings - ECTC 2016: 66th Electronic Components and Technology Conference. IEEE. 2016, 2169-2175. https://doi.org/10.1109/ECTC.2016.209

Suikkola, Jari et al. "Screen-Printed Stretchable Interconnects". Proceedings - ECTC 2016: 66th Electronic Components and Technology Conference. IEEE. 2016, 1650-1655. https://doi.org/10.1109/ECTC.2016.132

Mylläri, Ville et al. "Detergent impurity effect on recycled HDPE: Properties after repetitive processing". Journal of Applied Polymer Science. 2016. 133(31). https://doi.org/10.1002/app.43766

Garifullin, Marsel et al. "Buckling Behavior of Cold-Formed Studs with Thermal Perforations". MATEC Web of Conferences. 2016. 73. https://doi.org/10.1051/matecconf/20167304011

Kapgate, Bharat P. et al. "Reinforced chloroprene rubber by in situ generated silica particles: Evidence of bound rubber on the silica surface". Journal of Applied Polymer Science. 2016. 133(30). https://doi.org/10.1002/app.43717

Cui, S. et al. "Novel oxyfluorophosphate glasses and glass-ceramics". Journal of Non-Crystalline Solids. 2016, 445-446. 40-44. https://doi.org/10.1016/j.jnoncrysol.2016.05.005

Alekseev, Alexander et al. "The red, purple and blue modifications of polymeric unsymmetrical hydroxyalkadiynyl-N-arylcarbamate derivatives in Langmuir-Schaefer films". Thin Solid Films. 2016, 612. 463-471. https://doi.org/10.1016/j.tsf.2016.06.044

Suihkonen, Reija et al. "Erosion wear of vinylester matrix composites in aqueous and acidic environments at elevated temperatures". Wear. 2016, 358-359. 7-16. https://doi.org/10.1016/j.wear.2016.03.026

Bolelli, G. et al. "Sliding and abrasive wear behaviour of HVOF- and HVAF-sprayed Cr3C2-NiCr hardmetal coatings". Wear. 2016, 358-359. 32-50. https://doi.org/10.1016/j.wear.2016.03.034

Calejo, Maria Teresa et al. "Honeycomb porous films as permeable scaffold materials for human embryonic stem cell-derived retinal pigment epithelium". Journal of Biomedical Materials Research. Part A. 2016, 104(7). 1646-1656. https://doi.org/10.1002/jbm.a.35690

Piccardi, Armando, Stefania Residori, and Gaetano Assanto. "Nonlocal soliton scattering in random potentials". Journal of Optics. 2016. 18(7). https://doi.org/10.1088/2040-8978/18/7/07LT01

Trujillo-Sevilla, J. M. et al. "Restoring Integral Images from Focal Stacks Using Compressed Sensing Techniques". Journal of Display Technology. 2016, 12(7). 701-706. https://doi.org/10.1109/JDT.2016.2522922

Luna, E. et al. "Spontaneous formation of three-dimensionally ordered Bi-rich nanostructures within GaAs1-xBix/GaAs quantum wells". Nanotechnology. 2016. 27(32). https://doi.org/10.1088/0957-4484/27/32/325603

Lindgren, M. et al. "The influence of high-temperature sulfuric acid solution ageing on the properties of laminated vinyl-ester joints". International Journal of Adhesion and Adhesives. 2016, 68. 298-304. https://doi.org/10.1016/j.ijadhadh.2016.04.011

Kiilakoski, Jarkko et al. "Characterization of High-Velocity Single Particle Impacts on Plasma-Sprayed Ceramic Coatings". Journal of Thermal Spray Technology. 2016, 25. 1127-1137. https://doi.org/10.1007/s11666-016-0428-2

Poutanen, Mikko, Olli Ikkala, and Arri Priimägi. "Structurally Controlled Dynamics in Azobenzene-Based Supramolecular Self-Assemblies in Solid State". Macromolecules. 2016, 49(11). 4095-4101. https://doi.org/10.1021/acs.macromol.6b00562

Frisk, L., S. Lahokallio and J. Kiilunen "Reliability of ACA interconnections on microvia HDI PCBs in thermal cycling conditions". Kutilainen, J. (ed.). IMAPS Nordic Annual Conference 2016 Proceedings. IMAPS-International Microelectronics and Packaging Society. 2016.

Rodríguez Ripoll, Manel et al. "The role of niobium in improving toughness and corrosion resistance of high speed steel laser hardfacings". Materials and Design. 2016, 99. 509-520. https://doi.org/10.1016/j.matdes.2016.03.081

Isotahdon, Elisa, Elina Huttunen-Saarivirta, and Veli-Tapani Kuokkala. "Development of Magnetic Losses During Accelerated Corrosion Tests for Nd-Fe-B Magnets Used in Permanent Magnet Generators". Corrosion. 2016, 72(6). 732-741. https://doi.org/10.5006/2037

Ferracin, P. et al. "Development of MQXF: The Nb3Sn Low-β Quadrupole for the HiLumi LHC". IEEE Transactions on Applied Superconductivity. 2016. 26(4). https://doi.org/10.1109/TASC.2015.2510508

Sharma, Ramakant, Sagar Bhalerao and Dipti Gupta. "Effect of incorporation of CdS NPs on performance of PTB7: PCBM organic solar cells". Organic Electronics: physics, materials, applications. 2016, 33. 274-280. https://doi.org/10.1016/j.orgel.2016.03.030

Marchevsky, M. et al. "Protection Heater Design Validation for the LARP Magnets Using Thermal Imaging". IEEE Transactions on Applied Superconductivity. 2016. 26(4). https://doi.org/10.1109/TASC.2016.2530161

Marinozzi, Vittorio et al. "Quench Protection Study of the Updated MQXF for the LHC Luminosity Upgrade (HiLumi LHC)". IEEE Transactions on Applied Superconductivity. 2016. 26(4). https://doi.org/10.1109/TASC.2016.2523548

Akhmediev, Nail et al. "Roadmap on optical rogue waves and extreme events". Journal of Optics. 2016. 18(6). https://doi.org/10.1088/2040-8978/18/6/063001

DiMarco, J. et al. "Test Results of the LARP Nb3Sn Quadrupole HQ03a". IEEE Transactions on Applied Superconductivity. 2016. 26(4). https://doi.org/10.1109/TASC.2016.2528283

Salmi, T. and A. Stenvall. "The Impact of Protection Heater Delays Distribution on the Hotspot Temperature in a High-Field Accelerator Magnet". IEEE Transactions on Applied Superconductivity. 2016. 26(4). https://doi.org/10.1109/TASC.2016.2517238

Terva, Juuso et al. "Correlation of wear and work in dual pivoted jaw crusher tests". The 17th Nordic Symposium on Tribology - NORDTRIB 2016. 2016.

Ojala, Niko et al. "Edge effect in high speed slurry erosion wear tests of steels and elastomers". The 17th Nordic Symposium on Tribology - NORDTRIB 2016 14th - 17th June 2016 Aulanko, Hämeenlinna, Finland. 2016.

Milanti, A. et al. "Microstructure and Sliding Wear Behavior of Fe-Based Coatings Manufactured with HVOF and HVAF Thermal Spray Processes". Journal of Thermal Spray Technology. 2016, 25(5). 1040–1055. https://doi.org/10.1007/s11666-016-0410-z

Haiko, Oskari et al. "Processing and Wear Testing of Novel High-Hardness Wear-Resistant Steel". The 17th Nordic Symposium on Tribology - NORDTRIB 2016 14th - 17th June 2016 Aulanko, Hämeenlinna, Finland. 2016.

Kulju, S. et al. "Tuning electronic properties of graphene heterostructures by amorphous-to-crystalline phase transitions". Physical Review B. 2016. 93(19). https://doi.org/10.1103/PhysRevB.93.195443

Soto, Ana M. et al. "Optical Projection Tomography Technique for Image Texture and Mass Transport Studies in Hydrogels Based on Gellan Gum". Langmuir. 2016, 32(20). 5173-5182. https://doi.org/10.1021/acs.langmuir.6b00554

Janka, Leo et al. "Improving the toughness of thermally sprayed Cr 3C 2-NiCr hardmetal coatings by laser post-treatment". Materials and Design. 2016, 98. 135-142. https://doi.org/10.1016/j.matdes.2016.03.007

Juuti, Paxton et al. "Real-time effective density monitor (DENSMO) for aerosol nanoparticle production". Aerosol Science and Technology. 2016, 50(5). 487-496. https://doi.org/10.1080/02786826.2016.1168511

Polojärvi, Ville et al. "Influence of As/group-III flux ratio on defects formation and photovoltaic performance of GaInNAs solar cells". Solar Energy Materials and Solar Cells. 2016, 149. 213-220. https://doi.org/10.1016/j.solmat.2016.01.024

Izdebskaya, Yana et al. "Vortex stabilization by means of spatial solitons in nonlocal media". Journal of Optics. 2016. 18(5). https://doi.org/10.1088/2040-8978/18/5/054006

Ratia, Vilma et al. "Tuntemalla olosuhteet voit optimoida materiaalit kulutussovelluksiin". Promaint. 2016, 3. 16-20.

Hakola, Hanna et al. "Effect of Hole Transporting Material on Charge Transfer Processes in Zinc Phthalocyanine Sensitized ZnO Nanorods". Journal of Physical Chemistry C. 2016, 120(13). 7044-7051. https://doi.org/10.1021/acs.jpcc.6b01583

Blanco, Gwendolyn D. et al. "Syntheses, Charge Separation, and Inverted Bulk Heterojunction Solar Cell Application of Phenothiazine-Fullerene Dyads". ACS Applied Materials and Interfaces. 2016, 8(13). 8481-8490. https://doi.org/10.1021/acsami.6b00561

Heinonen, S. et al. "Effect of temperature and concentration of precursors on morphology and photocatalytic activity of zinc oxide thin films prepared by hydrothermal route". 3rd International Conference on Competitive Materials and Technology Processes (IC-CMTP3) . IOP Conference Series: Materials Science and Engineering. 2016. https://doi.org/10.1088/1757-899X/123/1/012030

Janka, Leo et al. "Influence of heat treatment on the abrasive wear resistance of a Cr3C2NiCr coating deposited by an ethene-fuelled HVOF spray process". Surface and Coatings Technology. 2016, 291. 444-451. https://doi.org/10.1016/j.surfcoat.2016.02.066

Soltani, I. et al. "Thermal, structural and optical properties of Er3+ doped phosphate glasses containing silver nanoparticles". Journal of Non-Crystalline Solids. 2016, 438. 67-73. https://doi.org/10.1016/j.jnoncrysol.2015.12.022

Heydari, Golrokh et al. "Wetting hysteresis induced by temperature changes: Supercooled water on hydrophobic surfaces". Journal of Colloid and Interface Science. 2016, 468. 21-33. https://doi.org/10.1016/j.jcis.2016.01.040

Fernandez-Palacio, Francisco et al. "Coordination networks incorporating halogen-bond donor sites and azobenzene groups". CrystEngComm. 2016, 18(13). 2251-2257. https://doi.org/10.1039/c6ce00059b

Lupo, Donald et al. "Market Perspectives and Road Map for Organic Electronics"., Lupo, Donald Nisato, Giovanni Ganz, Simone (editors). Organic and Printed Electronics: Fundamentals and Applications. 1 udg., Singapore: PAN STANFORD PUBLISHING. 2016, 509-536. https://doi.org/10.1201/b20043-15

Nisato, Giovanni , Donald Lupo and Simone Ganz, ed. Organic and Printed Electronics: Fundamentals and Applications 1 udg. Singapore: PAN STANFORD PUBLISHING. 2016. https://doi.org/10.1201/b20043

Pihlava, Katri, Jorma Keskinen and Jaakko Yli-Ojanperä. "Improving the signal-to-noise ratio of Faraday cup aerosol electrometer based aerosol instrument calibrations". Aerosol Science and Technology. 2016, 50(4). 373-379. https://doi.org/10.1080/02786826.2016.1153035

Escamez, Guillaume et al. "3-D Numerical Modeling of AC Losses in Multifilamentary MgB2 Wires". IEEE Transactions on Applied Superconductivity. 2016. 26(3). https://doi.org/10.1109/TASC.2016.2533024

Kanerva, Ulla et al. "Chemical synthesis of WC-Co from water-soluble precursors: The effect of carbon and cobalt additions to WC synthesis". International Journal of Refractory Metals and Hard Materials. 2016, 56. 69-75. https://doi.org/10.1016/j.ijrmhm.2015.11.014

Ma, Li et al. "DFT simulations and microkinetic modelling of 1-pentyne hydrogenation on Cu20 model catalysts". Journal of Molecular Graphics and Modelling. 2016, 65. 61-70. https://doi.org/10.1016/j.jmgm.2016.02.007

Korkiakoski, Samuli et al. "Influence of specimen type and reinforcement on measured tension-tension fatigue life of unidirectional GFRP laminates". International Journal of Fatigue. 2016, 85. 114-129. https://doi.org/10.1016/j.ijfatigue.2015.12.008

Kirby, G. et al. "Status of the Demonstrator Magnets for the EuCARD-2 Future Magnets Project". IEEE Transactions on Applied Superconductivity. 2016. 26(3). https://doi.org/10.1109/TASC.2016.2528544

Isakov, M. et al. "Strain rate change tests with the Split Hopkinson Bar method". European Physical Journal. Special Topics. 2016, 225(2). 231-242. https://doi.org/10.1140/epjst/e2015-99999-x

Vippola, Minnamari et al. "Insight to Nanoparticle Size Analysis—Novel and Convenient Image Analysis Method Versus Conventional Techniques". Nanoscale Research Letters. 2016. 11(1). https://doi.org/10.1186/s11671-016-1391-z

Katava, Marina et al. "Stability and Function at High Temperature. What Makes a Thermophilic GTPase Different from Its Mesophilic Homologue". Journal of Physical Chemistry Part B. 2016, 120(10). 2721-2730. https://doi.org/10.1021/acs.jpcb.6b00306

Rajala, S., M. Mettänen, and S. Tuukkanen. "Structural and Electrical Characterization of Solution-Processed Electrodes for Piezoelectric Polymer Film Sensors". IEEE Sensors Journal. 2016, 16(6). 1692-1699. https://doi.org/10.1109/JSEN.2015.2504956

Mashayekhi, Mohammad et al. "Evaluation of Aerosol, Superfine Inkjet, and Photolithography Printing Techniques for Metallization of Application Specific Printed Electronic Circuits". IEEE Transactions on Electron Devices. 2016, 63(3). 1246-1253. https://doi.org/10.1109/TED.2016.2522388

Vuornos, Kaisa et al. "Human Adipose Stem Cells Differentiated on Braided Polylactide Scaffolds is a Potential Approach for Tendon Tissue Engineering". Tissue Engineering Part A. 2016, 22(5-6). 513-523. https://doi.org/10.1089/ten.tea.2015.0276

Selvan, N. Tamil et al. "Piezoresistive natural rubber-multiwall carbon nanotube nanocomposite for sensor applications". Sensors and Actuators, A: Physical. 2016, 239. 102-113. https://doi.org/10.1016/j.sna.2016.01.004

Salunke, Jagadish K. et al. "Phenothiazine and carbazole substituted pyrene based electroluminescent organic semiconductors for OLED devices". Journal of Materials Chemistry C. 2016, 4(5). 1009-1018. https://doi.org/10.1039/c5tc03690a

Ali-Löytty, Harri et al. "Ambient-Pressure XPS Study of a Ni-Fe Electrocatalyst for the Oxygen Evolution Reaction". Journal of Physical Chemistry C. 2016, 120(4). 2247-2253. https://doi.org/10.1021/acs.jpcc.5b10931

Massera, J. et al. "Effect of the glass melting condition on the processing of phosphate-based glass-ceramics with persistent luminescence properties". Optical Materials. 2016, 52. 56-61. https://doi.org/10.1016/j.optmat.2015.12.006

Pavelescu, Emil-Mihai et al. "Effects of insertion of strain-engineering Ga(In)NAs layers on optical properties of InAs/GaAs quantum dots for high-efficiency solar cells". Optical Materials. 2016, 52. 177-180. https://doi.org/10.1016/j.optmat.2015.12.035

Ryczkowski, Piotr et al. "Ghost imaging in the time domain". Nature Photonics. 2016, (10). 167-170. https://doi.org/10.1038/nphoton.2015.274

Saari, S. et al. "Identification of single microbial particles using electro-dynamic balance assisted laser-induced breakdown and fluorescence spectroscopy". Aerosol Science and Technology. 2016, 50(2). 126-132. https://doi.org/10.1080/02786826.2015.1134764

Kuuluvainen, Heino et al. "Triboelectric charging of fungal spores during resuspension and rebound". Aerosol Science and Technology. 2016, 50(2). 187-197. https://doi.org/10.1080/02786826.2016.1141164

Allolio, Christoph et al. "Guanidinium Pairing Facilitates Membrane Translocation". Journal of Physical Chemistry Part B. 2016, 120(1). 143-153. https://doi.org/10.1021/acs.jpcb.5b10404

Lee, Tae Yong et al. "Alginate microgels created by selective coalescence between core drops paired with an ultrathin shell". Journal of Materials Chemistry B. 2016, 4(19). 3232-3238. https://doi.org/10.1039/c6tb00580b

Kaksonen, Anna H. et al. "Chemical and bacterial leaching of metals from a smelter slag in acid solutions". Hydrometallurgy. 2016, 159. 46-53. https://doi.org/10.1016/j.hydromet.2015.10.032

Genty, Goëry, Ari T. Friberg and Jari Turunen "Coherence of Supercontinuum Light". Progress in Optics. Progress in Optics. Elsevier. 2016. https://doi.org/10.1016/bs.po.2015.10.002

Bansod, Naresh D. et al. "Compatibilization of natural rubber/nitrile rubber blends by sol–gel nano-silica generated by in situ method". JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY. 2016, 80(2). 548–559. https://doi.org/10.1007/s10971-016-4114-0

Pirkkalainen, Herkko, Jarmo Elovaara and Leena Korpinen. "Decreasing the extremely low-frequency electric field exposure with a Faraday cage during work tasks from a man hoist at a 400 kV substation". Progress In Electromagnetics Research M. 2016, 48. 55-66.