Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. Published

    Using componentization as a means to standardize software development pro-cess: change from organizational redundancy to process effectivity

    Virtanen, P., 17 Aug 2011, IRIS/SCIS.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  2. Published

    Multi-material bio-printing facilities

    Virtanen, J. & Tuukkanen, S., 26 Oct 2017. 1 p.

    Research output: Other conference contributionPaper, poster or abstractScientific

  3. Published

    Proceedings of the Detection and Classification of Acoustic Scenes and Events 2017 Workshop (DCASE2017)

    Virtanen, T., Mesaros, A., Heittola, T., Diment, A., Vincent, E., Benetos, E. & Elizalde, B. M., 6 Nov 2017, Tampere University of Technology. Laboratory of Signal Processing. 142 p.

    Research output: Book/ReportAnthologyScientificpeer-review

  4. Published

    Narrow-Linewidth DFB and DBR Lasers with Surface Gratings Fabricated Using UV-Nanoimprint Lithography

    Virtanen, H., 24 Nov 2017, Tampere University of Technology. 70 p. (Tampere University of Technology. Publication; vol. 1512)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  5. Published

    Narrow-linewidth 780 nm DFB lasers fabricated using nanoimprint lithography

    Virtanen, H., Uusitalo, T., Karjalainen, M., Ranta, S., Viheriala, J. & Dumitrescu, M., 2018, In : IEEE Photonics Technology Letters. 30, 1, p. 51-54

    Research output: Contribution to journalArticleScientificpeer-review

  6. Published

    Introduction to sound scene and event analysis

    Virtanen, T., Plumbley, M. D. & Ellis, D., 2018, Computational Analysis of Sound Scenes and Events. Virtanen, T., Plumbley, M. D. & Ellis, D. (eds.). Cham: Springer, p. 3-12

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  7. Published

    Computational analysis of sound scenes and events

    Virtanen, T. (ed.), Plumbley, M. D. (ed.) & Ellis, D. (ed.), 2018, Cham: Springer.

    Research output: Book/ReportAnthologyScientificpeer-review

  8. Published

    Cost effective potentiostat design for large dynamic range measurements

    Virtanen, J. & Tuukkanen, S., 15 May 2015. 1 p.

    Research output: Other conference contributionPaper, poster or abstractScientific

  9. Published

    Evaluation of dry electrodes in canine heart rate monitoring

    Virtanen, J., Somppi, S., Törnqvist, H., Jeyhani, V., Fiedler, P., Gizatdinova, Y., Majaranta, P., Väätäjä, H., Cardó, A. V., Lekkala, J., Tuukkanen, S., Surakka, V., Vainio, O. & Vehkaoja, A., 1 Jun 2018, In : Sensors. 18, 6, 1757.

    Research output: Contribution to journalArticleScientificpeer-review

  10. Published

    In vitro detection of common rhinosinusitis bacteria by the eNose utilising differential mobility spectrometry

    Virtanen, J., Hokkinen, L., Karjalainen, M., Kontunen, A., Vuento, R., Numminen, J., Rautiainen, M., Oksala, N., Roine, A. & Kivekäs, I., Sep 2018, In : European Archives of Oto-Rhino-Laryngology. 275, 9, p. 2273-2279

    Research output: Contribution to journalArticleScientificpeer-review

  11. Published

    Piezoelectric cantilever force sensor sensitivity measurements

    Virtanen, J., Sariola, V. & Tuukkanen, S., 3 Sep 2018, XXII World Congress of the International Measurement Confederation (IMEKO 2018): 3–6 September 2018, Belfast, United Kingdom. IOP Press, p. 1-4 4 p. (Journal of Physics: Conference Series; vol. 1065).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  12. Published

    Time-Frequency Processing: Spectral Properties

    Virtanen, T., Vincent, E. & Gannot, S., 2018, Audio Source Separation and Speech Enhancement. Wiley, p. 15-30

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  13. Accepted/In press

    Direct Measurement of Contraction Force in Human Cardiac Tissue Model Using Piezoelectric Cantilever Sensor Technique

    Virtanen, J., Toivanen, M., Toimela, T., Heinonen, T. & Tuukkanen, S., 25 Oct 2019, (Accepted/In press) In : Current Applied Physics. 20, 1, p. 155-160 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  14. Published

    Piezoelectric dual axis cantilever force measurement probe

    Virtanen, J., Pammo, A., Vehkaoja, A. & Tuukkanen, S., 15 Feb 2020, In : IEEE Sensors Journal. 20, 4, 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  15. Published

    Dry contact electrodes performance in canine ECG

    Virtanen, J., Leivo, J., Somppi, S., Törnqvist, H., Fiedler, P., Väätäjä, H., Surakka, V. & Vehkaoja, A., 4 Dec 2018, ACI '18: Proceedings of the Fifth International Conference on Animal-Computer Interaction. ACM, 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  16. Published

    New solution of motion control problem in mechatronic system

    Virvalo, T. & Puusaari, P., 1992, In : Computers Elect. Engng. 18, 1, p. 41-50

    Research output: Contribution to journalArticleScientificpeer-review

  17. Published

    Simple circuits control acceleration and deceleration

    Virvalo, T., 1986, In : Hydraulics and Pneumatics. 39, 11(March), p. 65-67

    Research output: Contribution to journalArticleProfessional

  18. Published

    Hydrauliikka ja pneumatiikka asemaservon toteutuksessa, osa III, Vesihydraulisen asemaservon suunnittelu

    Virvalo, T. & Mäkinen, E., 2003, In : Fluid Finland. 2, 2, p. 24-31

    Research output: Contribution to journalArticleProfessional

  19. Published

    Modelling hydraulic position servo realized with commercial components

    Virvalo, T., 1993, 3rd International Conference on Fluid Power Transmission and Control, Zhejiang University, Hangzhou China, 13-16 September 1993. p. 6 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  20. Published

    Elektroniset ohjaimet hydrauliikassa

    Virvalo, T., 1985, Täydennyskoulutuskurssi "Hydraulisten järjestelmien sähköinen ohjaus", Tampereen teknillinen korkeakoulu, opintomoniste 108. Tampere, p. 27 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  21. Published

    Comparing different controllers of an electrohydraulic position servo

    Virvalo, T., Linjama, M. & Mattila, J., 1997, New Achievements and Ideals in Fluid Power Engineering, Proceedings of the 4th International Conference on Fluid Power Transmission and Control, '97 ICFP, September 9-11, Hangzhou, China. Yongxiang, L. & Yiyuan, G. (eds.). Beijing: International Academic Publishers, p. 215-219

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  22. Published

    Energy storing and recovering in loading and un-loading cycles of forward loader

    Virvalo, T. & Sun, W., 2007, Power Transmission and Motion Control (PTMC 2007), University of Bath, UK, 12-14 September 2007. Johnston, D. N. & Plummer, A. R. (eds.). p. 255-268

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  23. Published

    Simple Electronics Control Servotype Hydraulic Action

    Virvalo, T. K., 1982, In : Hydraulics & Pneumatics. p. s. 28

    Research output: Contribution to journalArticleScientificpeer-review

  24. Published

    Tietokone simuloi tuotantosolua

    Virvalo, T. & Lehtinen, M., 1987, In : Prosessori. 10, p. 18-19

    Research output: Contribution to journalArticleProfessional

  25. Published

    The use of Q-parameter in design of hydraulic and pneumatic position servo

    Virvalo, T. & Pohjolainen, S., 1989, Fluid Power Transmission and Control - Proceedings of the 2nd International Conference. Kiina, p. 118-121

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  26. Published

    An intelligent novel valve concept and its possibilities

    Virvalo, T., 2002, Proceedings of the 8th Mechatronics Forum International Conference, University of Twente, Netherlands, 24-26 June, 2002. van Amerongen, J. (ed.). p. 259-268

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  27. Published

    Hydraulic redesign improves machine productivity

    Virvalo, T., 1985, In : Hydraulics & Pneumatics. 38, 11, p. 77-79, 124

    Research output: Contribution to journalArticleScientificpeer-review

  28. Published

    On the encoder based velocity and acceleration feedback signals in demanding servo applications

    Virvalo, T. & Lehto, E., 1998, Advanced Mechatronics: first-time-right: proceedings of the ICMA '98. 2nd International Conference on Machine Automation, September 15-18, 1998, Tampere, Finland. Kivikoski, M. (ed.). p. 481-496

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  29. Published

    Mechatronic design for improving performance and efficiency of sawing process by adding a sensor and controller

    Virvalo, T., 2004, In: Conrad, F. Workshop, Mechatronics Day 2004, 10.6.2004, Technical University of Denmark. p. 6 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  30. Published

    On the motion control of pneumatic servo cylinder drives

    Virvalo, T., 1998, Proceedings - The Fourth International Conference on Motion and Vibration Control MOVIC, August 25-28, 1998, ETH Zurich, Switzerland. Schweitzer, G. (ed.). p. 733-738

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  31. Published

    The Influence of Pumps and Valves on the Efficiency of a Hydraulic Boom, Chapter 8

    Virvalo, T. & Vilenius, M., 2000, Developments in Fluid Power Control of Machinery and Manipulators. Garbacik, A. & Stecki, J. (eds.). Cracow: Fluid Power Net Publication, p. 183-207

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  32. Published

    User friendly environment for the R&D of controllers in heavy machinery

    Virvalo, T., Linjama, M., Aaltonen, V. & Kivikoski, M., 2000, Proceedings of the International Conference on Machine Automation, ICMA2000, Human Friendly Mechatronics, September 27-29, 2000, Osaka Institute of Technology, Osaka, Japan. Japani, p. 213-218

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  33. Published

    On the Damping of a Hydraulic Cylinder Drive

    Virvalo, T., 1999, Proceedings of The Sixth Scandinavian International Conference on Fluid Power, May 26 - 28, 1999, Tampere, Finland. Koskinen, K. T., Vilenius, M. & Tikka, K. (eds.). Tampere, p. 499-518

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  34. Published

    Toimilaitteiden ohjaustekniikka

    Virvalo, T., 1985, HITECH-huipputekniikan täydennyskoulutuskurssi, Tampereen teknillinen korkeakoulu, Tampere. Tampere, p. 5 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  35. Published

    Simple design of a hydraulic and pneumatic system with independent intelligent actuator

    Virvalo, T. & Puusaari, P., 1990, 13th Conference Fluid Power '90, Brno CSSR, 1990. p. 10 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  36. Published

    Suuren hitauskuorman siirto

    Virvalo, T., 1985, Täydennyskoulutuskurssi "Hydraulisten järjestelmien sähköinen ohjaus", Tampereen teknillinen korkeakoulu, opintomoniste 108. Tampere, p. 23 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  37. Published

    Design, simulation and experimetal tests of hydraulic hydro-sounder

    Virvalo, T. & Laine, A., 2005, Proceedings of the 6th JFPS International Symposium on Fluid Power, November 7-10, 2005, Tsukuba, Japani. p. 149-154

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  38. Published

    User friendly environment for the R&D of controllers in heavy machinery

    Virvalo, T., Linjama, M., Aaltonen, V. & Kivikoski, M., 2000, Human Friendly Mechatronics, Selected Papers of the International Conference on Machine Automation ICMA2000, September 27-29, 2000, Osaka, Japan. p. 359-364

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  39. Published

    The use of linear model in design of electrohydraulic position servo system

    Virvalo, T., 1990, Pneu-Hidro '90, Miskolc Hungary, 28-30 August 1990. p. 10 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  40. Published

    Influence of position sensor resolution on accuracy of pneumatic position servo

    Virvalo, T., 2007, Proceedings of the Fifth International Symposium on Fluid Power Transmission and Control, ISFP 2007, June 6-8, 2007, Beidaihe, China. p. 4 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  41. Published

    Comparing controllers in pneumatic cylinder motion control

    Virvalo, T. & Mäkinen, E., 2008, Proceedings of the 6th International Fluid Power Conference Dresden, Fluid Power in Motion, 6iFK, April 1.-2.2008, Dresden. p. 289-304

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  42. Published

    The influence of servo valve size on the performance of a pneumatic position servo

    Virvalo, T., 2001, Proceedings of the Fifth International Conference on Fluid Power Transmission and Control (ICFP´2001) April 3-5, 2001, Hangzhou, China. Lu, Y., Chen, Y. & Xu, L. (eds.). Kiina, p. 244-248

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  43. Published

    Designing position and velocity feedback loops when synchronizing four hydraulic cylinders

    Virvalo, T., Tuominen, P., Lehto, E. & Luomaranta, M., 1995, International Conference on Recent Advances in Mechatronics, Istanbul , Turkey, August 14-16. Istanbul, p. 985-989

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  44. Published

    Modelling pneumatic position servo realized with commercial components

    Virvalo, T., 1993, 2nd JHPS International Symposium on Fluid Power, Tokyo Japan, 6-9 September 1993. p. 6 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  45. Published

    Distributed motion control with independent actuators

    Virvalo, T. K. & Puusaari, P. K., 1991, Joint International Coference FAIM '91, Limerick, Ireland, 13-15 March '91,. p. 10 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  46. Published

    Closed loop control improves timber sawing process

    Virvalo, T., Inberg, J. & Lammila, M., 2005, Proceedings of the Ninth Scandinavian International Conference on Fluid Power, SICFP'05, June 1.-3, 2005, Linköping, Sweden. p. 12 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  47. Published

    Digitaalitekniikka hydraulisissa ja pneumaattisissa asemaservoissa

    Virvalo, T., 1989, Tampere: TTKK. 23 p. (Täydennyskoulutuskurssi: Hydraulisten ja pneumaattisten toimilaitteiden digitaalinen säätö, ohjelmointi ja ohjaus)

    Research output: Book/ReportCommissioned reportProfessional

  48. Published

    Motion and force control in water hydraulics

    Virvalo, T. & Mäkinen, E., 2000, Actionneurs hydrauliques: pourquoi pas l`eau?. p. 99-138

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  49. Published

    Pressure and position control with electropneumatic on/off-valves

    Virvalo, T., 1993, 3rd International Conference on Fluid Power Transmission and Control, Zhejiang University, Hangzhou, China, 13-16 September 1993. p. 6 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  50. Published

    Distributed motion control in hydraulics and pneumatics

    Virvalo, T. & Puusaari, P., 1990, Pneu-hidro '90, Miscolc Hungary, 28-30 August 1990. p. 8 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  51. Published

    Synchronizing of the movement of four cylinders

    Virvalo, T., 1995, Prooceedings of The Fourth Scandinavian International Conference on Fluid Power, September 26-29, Tampere, Finland. p. 133-146

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  52. Published

    The use of microcontroller in electropneumatic position servo system

    Virvalo, T., 1991, ISFP '91, Beijing China, 1991. p. 6 s.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  53. Published

    Hydraulic Motion Control - Robustness Against Inertia Load Changes

    Virvalo, T., 2002, Proceedings of the 5th JFPS International Symposium on Fluid Power, Nara 2002, November 14, 2002. Japan, p. 561-566

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  54. Published

    Hydraulinen paikoitus ohjelmoitavalla logiikalla

    Virvalo, T., 1991, In : Konepajamies. 10, p. s. 5

    Research output: Contribution to journalArticleProfessional

  55. Published

    On the damping of a pneumatic cylinder drive

    Virvalo, T., 1999, Proceedings of the 3rd International Symposium on Fluid Power Transmission and Control, September 7-9, 1999, Harbin, China. p. 472-477

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  56. Published

    Improving energy utilization in hydraulic booms - what it is all about

    Virvalo, T. & Sun, W., 2005, Proceedings of the Sixth International Conference on Fluid Power Transmission and Control, ICFP'2005, April 5-8, Hangzhou, China. Lu, Y. (ed.). p. 55-65

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  57. Published

    Control of the independent intelligent actuator

    Virvalo, T. & Puusaari, P., 1989, First JHPS International Symposium on Fluid Power, Tokyo. Japani, p. 41-47

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  58. Published

    Compensating the influence of the piston position in pneumatic position servo - simulated results

    Virvalo, T., 1992, Fluidmechanismen 92, Olomouc, CSSR, 1992. p. 5 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  59. Published

    Ohjauksen ja säädön ero liikkeen toteutuksessa

    Virvalo, T. & Mäkinen, E., 2003, In : Hydrauliikka ja pneumatiikka asemaservon toteutuksessa, osa II. Hydraulisen asemaservon suunnittelu, Fluid Finland- lehti. 2, 1, p. 20-27

    Research output: Contribution to journalArticleScientificpeer-review

  60. Published

    Comparing different controllers of electropneumatic position servo

    Virvalo, T., 1996, Proceedings of the Third JHPS International Symposium on Fluid Power, Yokohama'96, 4-6 November 1996. Araki, K. (ed.). Tokyo, p. 151-156

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  61. Published

    Servo pneumatics versus on/off pneumatics-performance and energy consumption

    Virvalo, T. & Mäkinen, E., 2003, Proceedings of the 18th International Conference on Hydraulics and Pneumatics, Praha, 30.9-1.10.2003. Tiskárna DOT Domu techniky Ostrava, spol. s r.o.: Czech Mechanical Engineering Society in cooperation with VSB-Technical University of Ostrava, Faculty of Mechanical Engineering, Department of Control System and Instrumentation, p. 58-67

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  62. Published

    The use of linear model in design of electropneumatic servo system.

    Virvalo, T., 1991, 2nd International Conference on Fluid Power, Tampere Finland, 19-21 March 1991. p. 177-184

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  63. Published

    Distributed motion control

    Virvalo, T. & Puusaari, P., 1990, ISRAM '90, Canada, 18-20 July 1990. p. 6 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  64. Published

    Comparing different control strategies of timber sawing process

    Virvalo, T. & Inberg, J., 2005, Bath Workshop on Power Transmission and Motion Control (PTMC 2005), 7-9 September 2005. Johnston, D. N., Burrows, C. R. & Edge, K. A. (eds.). p. 59-74

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  65. Published

    The use of the linear model in the design of the pneumatic position servo

    Virvalo, T., 1989, In : Hydraulic Pneumatic Mechanical Power. June

    Research output: Contribution to journalArticleProfessional

  66. Published

    Can bus applied on hydraulic computed force control?

    Virvalo, T., Lammila, M. & Lehto, E., 2003, International Conference on Mechatronics, ICOM 2003. London and Bury St Edmunds, UK: Professional Engineering Publishing Limited, p. 215-221

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  67. Published

    Modelling and Design of a Pneumatic Position Servo System Realized with Commercial Components

    Virvalo, T., 1995, Tampere: Tampere University of Technology. (Tampereen teknillinen korkeakoulu. Julkaisuja; no. 171)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  68. Published

    CAN bus applied on hydraulic computed force control

    Virvalo, T., Lammila, M. & Lehto, E., 2004, In : Transactions of the Institute of Measurement and Control. 26, 5, p. 373-391

    Research output: Contribution to journalArticleScientificpeer-review

  69. Published

    Distributed control of a hydraulic actuator system

    Virvalo, T. & Puusaari, P., 1991, 2nd International Conference on Fluid Power, Tampere Finland, 19-21 March. p. 549-558

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  70. Published

    Follow-up accurary of water hydraulic swing

    Virvalo, T. & Mattila, J., 2007, Proceedings of the Fifth International Symposium on Fluid Power Transmission and Control, ISFP 2007, June 6-8, 2007, Beidaihe, China. China, p. 5 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  71. Published

    Liikeohjaus hydrauliikassa ja pneumatiikassa

    Virvalo, T. & Puusaari, P., 1990, In : Konepajamies. No 3, p. 64-66

    Research output: Contribution to journalArticleProfessional

  72. Published

    Follow-up accurary of a force control water hydraulic cylinder drive

    Virvalo, T. & Mäkinen, E., 2000, Proceedings. Sixth Triennal International Symposium on Fluid Control, Measurement and Visualization, FLUCOME 2000, August 13-17, 2000, Sherbrooke, Canada. Laneville, A. (ed.). p. 5 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  73. Published

    PI and PID-controllers in a Hydraulic Position Servo System- What it is all about

    Virvalo, T., 2001, In: Lu, Y., Chen, Y. & Xu, L. Proceedings of the Fifth International Conference on Fluid Power Transmission and Control (ICFP´2001) April 3-5, 2001, Hangzhou, China. Kiina, p. 130-134

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  74. Published

    Fuzzy Logic Forward Compensation for Synchronizing Hydraulic Cylinders

    Virvalo, T., 1996, Soft computing with industrial applications. Vol. 5. Proceedings of the world automation congress (WAC '96), May 28-30, 1996, Montpellier, France. Jamshidi, M. (ed.). USA, p. 653-658

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  75. Published

    The use of a microcontroller in electrohydraulic position servo system

    Virvalo, T., 1991, 2nd International Conference on Fluid Power, Tampere Finland, 19-21 March 1991. p. 377-383

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  76. Published

    Pneumatiikalla pitkä historia

    Virvalo, T. & Mäkinen, E., 2003, In : Fluid Finland. 2, 3, p. 8-10

    Research output: Contribution to journalArticleProfessional

  77. Published

    Control of the independent intelligent actuator

    Virvalo, T. & Puusaari, P., 1989, Fluid Power Transmission and Control, Proceedings of the 2nd International Conference. Kiina, p. 241-246

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  78. Published

    Vesihydraulisen asemaservon suunnittelu

    Virvalo, T. & Mäkinen, E., 2003, In : Fluid Finland. 2, 2, p. 24-31

    Research output: Contribution to journalArticleScientificpeer-review

  79. Published

    Comparing Controllers in Pneumatic Motion Control

    Virvalo, T., 2003, In: Zhuangyun, L. et al. (Eds. ). Proceedings of the Fourth International Symposium on Fluid Power Transmission and Control, ISFP'2003, April 8-10, 2003, Wuhan, China. Chaonei Dajie, Beijing: International Academic Publishers/World Publishing Corporation, p. 284-289

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  80. Published

    Force Control of a Hydraulic Cylinder Drive

    Virvalo, T., Mäkinen, E. & Vilenius, M., 1999, Proceedings of The Sixth Scandinavian International Conference on Fluid Power, May 26 - 28, 1999, Tampere, Finland. Koskinen, K. T., Vilenius, M. & Tikka, K. (eds.). Tampere, p. 271-284

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  81. Published

    Fuzzy logic controller for hydraulic drives

    Virvalo, T. & Koskinen, H., 1992, 10th Aachen Colloquium on Fluid Power Technology, Aachen, 17-19 March 1992. p. 12 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  82. Published

    Säätötekniikan perusteita

    Virvalo, T., 1990, Täydennyskoulutuskurssi "Itsenäiset toimilaitteet - Helpotusta vaativaan koneenrakennukseen" 25.-26.10.1990. p. 72 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  83. Published

    The influence of the supply line on the performance of a pneumatic position servo system

    Virvalo, T. & Mäkinen, E., 1999, Fluid Power. Proceedings of the Fourth JHPS International Symposium on Fluid Power, Tokyo, 15-17 November 1999. Yokota, S. (ed.). p. 149-154

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  84. Published

    On the efficiency of hydraulic booms and manipulators

    Virvalo, T. & Vilenius, M., 1998, In: Stecki, J. & Garbacik, A. Developments in Fluid Power Control of Machinery and Manipulators, International Scientific Forum extended abstracts of the proceedings, Cracow, Poland 25-28 June 1998. p. 63-65

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  85. Published

    Dimensioning and selecting pressure supply line equipment for a pneumatic position servo

    Virvalo, T. & Mäkinen, E., 2000, Proceedings. Sixth Triennal International Symposium on Fluid Control, Measurement and Visualization, FLUCOME 2000, August 13-17, 2000, Sherbrooke, Canada. Laneville, A. (ed.). p. 6 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  86. Published

    Distributed motion control in hydraulics and pneumatics

    Virvalo, T., 1992, In : Mechatronics. 2, 3, p. 277-288

    Research output: Contribution to journalArticleScientificpeer-review

  87. Published

    Computed force control versus state control in hydraulic motion control

    Virvalo, T., 2003, The Eight Scandinavian International Conference on Fluid Power, Proceedings of the Conference, May 7-9, 2003, Tampere, Finland, SICFP´03. Koskinen, K. T. & Vilenius, M. (eds.). Tampere: Tampere University of Technology, p. s. 11731185

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  88. Published

    The design of pneumatic position servo

    Virvalo, T., 1990, Pneu-Hidro '90, Miskolc Hungary, 28-30 August 1990. p. 10 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  89. Published

    On the damping of water hydraulic cylinder drives

    Virvalo, T., Mäkinen, E. & Vilenius, M., 1999, Fluid Power. Proceedings of the Fourth JHPS International Symposium on Fluid Power, Tokyo, 15-17 November 1999. Yokota, S. (ed.). p. 351-356

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  90. Published

    CAN bus inside hydraulic position tracking control

    Virvalo, T. & Lehto, E., 2007, Proceedings of 2nd International Forum on Systems and Mechatronics, IFSM 2007, December 3-6, 2007, NCKU, Tainan, Taiwan. Shih, M-C. (ed.). Taiwan: Tsang Hai Book Publishing Co., p. 7-12

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  91. Published

    Comparing pressure control methods

    Virvalo, T., 2003, In: Zhuangyun, L. et al. (Eds. ). Proceedings of the Fourth International Symposium on Fluid Power Transmission and Control, ISFP'2003, April 8-10, 2003, Wuhan, China. Chaonei Dajie, Beijing: International Academic Publishers/World Publishing Corporation, p. 25-30

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  92. Published

    Open loop control in positioning with proportional valves in hydraulics

    Virvalo, T., 1991, ISFP '91, Beijing China. p. 6 s.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  93. Published

    Some steps in development of modern water hydraulics

    Virvalo, T. & Vilenius, M., 1999, Proceedings of the 3rd International Symposium on Fluid Power Transmission and Control (ISFP'99), September 7-9, 1999, Harbin, China. p. 36 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  94. Published

    Feed force based constant torque control of hydraulic motor in chainsaw application

    Virvalo, T. & Inberg, J., 2004, Bath Workshop on Power Transmission and Motion Control (PTMC 2004). p. 173-186

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  95. Published

    La logica fuzzy in oleoidraulica e pneumatica

    Virvalo, T. & Niemelä, E., 1994, In : Oleadinamica- pneumatica. 3 marzo, p. 187-191

    Research output: Contribution to journalArticleScientificpeer-review

  96. Published

    Sumea säätö asemaservossa

    Virvalo, T., 1992, In : Konepajamies. 10, p. 8 s

    Research output: Contribution to journalArticleProfessional

  97. Published

    Nonlinear model of analog valve

    Virvalo, T., 1997, The Fifth Scandinavian International Conference on Fluid Power, SICFP 97, Linköping, Sweden, 28-30 May 1997. p. 199-214

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  98. Published

    Pneumatic automation for firework assembly

    Virvalo, T., Luomaranta, M. & Mäkinen, E., 1989, In : Power International. 35, 413, p. 267-270

    Research output: Contribution to journalArticleProfessional

  99. Published

    Sähköpneumaattisen voiman- ja paineensäätö

    Virvalo, T. & Kukkonen, E., 1990, In : Konepajamies. No 1, p. 48-53

    Research output: Contribution to journalArticleProfessional

  100. Published

    Comparing control methods of feed force

    Virvalo, T., 2005, Proceedings of the Sixth International Conference on Fluid Power Transmission and Control, ICFP'2005, April 5-8, Hangzhou, China. Lu, Y. (ed.). p. 134-138

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Download list To download, please limit the number of search results to 1,000 or less.