Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. Published

    Strain rate dependent deformation behavior of cold heating steels

    Vuoristo, T., Kuokkala, V-T., Rämö, J., Partinen, J. & Kolsi, J., 2006, Asia Steel International Conference 2006, (Asia Steel ´06), 90th Anniversary, May 9-11, 2006 Fukuoka, Japan. p. 902-907

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  2. Published

    Modification of the structure and properties of thermally sprayed coatings by various post-processing methods

    Vuoristo, P., 2000, Metal 2000, 9th International Metallurgical Conference, 16.-18.5.2000 Ostrava. Ostrava: Tanger, spol. s r.o. Ostrava, p. 1-8 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  3. Published

    Stoichiometry and Impurities in Sputtered Alumina Films on Copper

    Vuoristo, P., Mäntylä, T., Kettunen, P. & Lappalainen, R., 1991, In : Thin Solid Films. 204, p. 297-311

    Research output: Contribution to journalArticleScientificpeer-review

  4. Published

    Terminen ruiskutus - menetelmät, pinnoitteet ja teolliset sovellukset

    Vuoristo, P., 2004, In : Hitsaustekniikka. 5, p. 5-18

    Research output: Contribution to journalArticleProfessional

  5. Published

    Laser coating as an industrial coating process

    Vuoristo, P., 2002, Euroceram Interregional Seminar in Tampere region, 10.-11.9.2002, Ceramic Coatings (Pinnoitepäivät). Leivo, J. (ed.). Tampere: TTKK, Materiaaliopin laitos, p. 12 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  6. Published

    Behavior of hot dip galvanized dual phase sheets steels at high rates of deformation

    Vuoristo, T., Apostol, M., Kuokkala, V-T. & Peura, P., 2004, In : Journal de Physique IV. 110, p. 213-218

    Research output: Contribution to journalArticleScientificpeer-review

  7. Published

    ZrO2-pohjaisten keraamijauheiden detonaatiopinnoitus

    Vuoristo, P., Niemi, K. & Mäntylä, T., 1991, Tampere: Tampereen teknillinen korkeakoulu. 18 p. (Tampereen teknillinen korkeakoulu, Materiaaliopin laitos, Raportti; no. 29/1991)

    Research output: Book/ReportCommissioned reportProfessional

  8. Published

    Terminen ruiskutus Pohjoismaissa

    Vuoristo, P. & Nylen, P., 2007, In : Hitsaustekniikka. 57, 6, p. 7-10

    Research output: Contribution to journalArticleProfessional

  9. Published

    MoCVD-menetelmällä valmistetut alumiini- ja magnesiumoksidipinnoitteet

    Vuoristo, P., 1986, Tampere: Tampereen teknillinen korkeakoulu. 19 p. (Tampereen teknillinen korkeakoulu, Materiaaliopin laitos, Raportti; no. 40/1986)

    Research output: Book/ReportCommissioned reportProfessional

  10. Published

    Plasmaruiskutetuista oksidipinnoitteista

    Vuoristo, P., 1985, Tampere: Tampereen teknillinen korkeakoulu. (Tampereen teknillinen korkeakoulu, Materiaaliopin laitos, Raportti; no. 29/1985)

    Research output: Book/ReportCommissioned reportProfessional

  11. Published

    Characterization of soft polymer roll covers

    Vuoristo, T. & Kuokkala, V-T., 2004, Proceedings of the 2003 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, June 2-4, 2004, Charlotte, North Carolina, USA. p. 64-74

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  12. Published

    Preparation, structure and wear properties of detonation gun sprayed WC and Cr3C2 based cermet coatings

    Vuoristo, P., Niemi, K., Mäkelä, A. & Mäntylä, T., 1993, Proceedings of 1993 Thermal Spray Conf. (TH '93), March 3.-5, Aachen, Federal Republic of Germany. p. 310-313

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  13. Published

    Wear resistant coatings with low friction properties for high temperature applications (F110)

    Vuoristo, P. & Mäntylä, T., 2001, C0ST Action 516 - Tribology - Scientific final report. Holmberg, K. (ed.). Belgium: European Communities, p. 120-125

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  14. Published

    Plasmaruiskutuspinnoitteita vaativiin kohteisiin

    Vuoristo, P. & Niemi, K., 1986, In : Hitsaustekniikka. 4/1986, p. 39-42

    Research output: Contribution to journalArticleProfessional

  15. Published

    Sputteroitujen krominitridi- ja molybdeeninitridipinnoitteiden rakenne ja ominaisuudet sekä soveltuminen kuparin muovaukseen

    Vuoristo, P., Mäntylä, T. & Kettunen, P., 1989, Tampere: Tampereen teknillinen korkeakoulu. 54 p. (TTKK/Materiaalioppi, Raportti; no. 26)

    Research output: Book/ReportCommissioned reportProfessional

  16. Published

    Structure and Wear Characteristics of WC-Co(Cr) and Cr3C2-NiCr Coatings Sprayed by a New Potential HVOF Process

    Vuoristo, P., Nieminen, R., Mäntylä, T. & Barbezat, G., 1996, Proceedings of TS96 Thermal Spraying Conference,. E., L. (ed.). Düsseldorf: DVS-Bericte Band 175, DVS-Verlag, p. 301-305

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  17. Published

    Vechile Positioning Using GPS and Dead-Reckoning Sensors

    Vuoristo, V-P., Konnunaho, T. & Kivikoski, M., 1999, 32nd ISATA, Advances in Automotive and Transportation Technology and Practice for the 21st Century, 14th - 18th June 1999, Vienna, Austria. Roller, D. (ed.). p. 167-174

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  18. Published

    High velocity sprays boost hardmetal industrial coatings

    Vuoristo, P., 2007, In : Metal Powder Report. 62, 3, p. 22-29

    Research output: Contribution to journalArticleScientific

  19. Published

    Termisesti ruiskutetut muovipinnoitteet

    Vuoristo, P., 2000, Tutkimusta ja uusia sovelluksia muovitekniikassa, Keuruu 8.-9.6.2000 Tampereen teknillinen korkeakoulu, Muovitekniikka. p. 23-29

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  20. Published

    Termisen ruiskutuksen lisäaineet

    Vuoristo, P., 2007, In : Hitsaustekniikka. 57, 6, p. 22-28

    Research output: Contribution to journalArticleProfessional

  21. Published

    Effect of strain rate, moisture and temperature on the deformation behavior of of polymer roll covers

    Vuoristo, T. & Kuokkala, V-T., 2004, In : Experimental Mechanics. 44, 3, p. 313-319

    Research output: Contribution to journalArticleScientificpeer-review

  22. Published

    International Conference on Metallurgical Coatings

    Vuoristo, P., 1988, Tampereen teknillinen korkeakoulu. 10 p. (TTKK, Materiaaliopin laitos, Raportti; no. 34/1988)

    Research output: Book/ReportCommissioned reportProfessional

  23. Published

    Thermal spray coating processes

    Vuoristo, P., 2014, Comprehensive materials processing, 1st edition Volume 4: Coatings and films. Cameron, D. (ed.). Elsevier, p. 229-276 47 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  24. Published

    On the Properties of Detonation Gun Sprayed and Plasma Sprayed Ceramic Coatings

    Vuoristo, P. M. J., Niemi, K. J. & Mäntylä, T. A., 1992, Int. Thermal Spray Conference, Orlando, Florida, USA, May 28 - June 5, 1992. p. 171-176

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  25. Published

    Ruiskutusmetelmän vaikutus WC-12%Co-jauheesta valmistettujen pinnotteiden rakenteeseen ja kulumiskestävyyteen

    Vuoristo, P. & Mäntylä, T., 1995, Tampere: Tampereen teknillinen korkeakoulu. (Tampereen teknillinen korkeakoulu, Materiaaliopin laitos, Raportti; no. 21/1995)

    Research output: Book/ReportCommissioned reportProfessional

  26. Published

    25th Symposium on Engineering Aspects of MHD

    Vuoristo, P., 1987, Tampere: Tampere University of Technology. 9 p. (Tampere University of Technology, Institute of Materials Science, Report; no. 36/1987)

    Research output: Book/ReportCommissioned reportProfessional

  27. Published

    Adhesion and Structure of R.F.-sputtered Magnesiumoxide Coatings on Various Metal Substrates

    Vuoristo, P., Mäntylä, T. & Kettunen, P., 1986, Tampere: Tampere University of Technology. 21 p. (Tampere University of Technology, Institute of Materials Science, Report; no. 29/1986)

    Research output: Book/ReportCommissioned reportProfessional

  28. Published

    Grafiittisten pystyvalusuulakkeiden pinnoittaminen keraamilla

    Vuoristo, P., Mäntylä, T. & Kettunen, P., 1989, Tampere: Tampereen teknillinen korkeakoulu. 29 p. (TTKK/Materiaalioppi, Raportti; no. 28)

    Research output: Book/ReportCommissioned reportProfessional

  29. Published

    Properties of TiC-Ni Based Coatings Deposited by Different HVOF Spraying

    Vuoristo, P., Väisänen, M., Mäntylä, T. & Berger, L-M., 2000, Thermal Spray Surface Engineering via Applied Research, Proceedings of the 1st International Thermal Spray Conference, 8-11 May 2000, Montréal, Québec, Canada. Berndt, C. C. (ed.). AMS International, p. 509-514

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  30. Published

    Adhesion and Structure of Rf-sputtered Magnesium Oxide Coatings on Various Metal Substrates

    Vuoristo, P., Mäntylä, T. & Kettunen, P., 1986, In : Journal of Vacuum Science & Technology A. 4, 6, p. 2932

    Research output: Contribution to journalArticleScientificpeer-review

  31. Published

    The Use of High Power Diode Laser for Cladding and Surface Treatment

    Vuoristo, P., Tuominen, J., Latokartano, J., Hayhurst, P., Vihinen, J., Mäntylä, T. & Andersson, P., 2002, Proceedings "Mechanical Engineering Research New Possibilities by Co-operation", Seminar 3 Jan 2002, Tampere University of Technology. Hakalehto, K. & Mattila, M. (eds.). p. 49-59

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  32. Published

    Structure and Properties of HVOF and Plasma Sprayed Ceramic Alumina-Chromia Coatings Deposited from Fused and Crushed Powders

    Vuoristo, P., Niemi, K., Matikainen, V., Hyvärinen, L., Koivuluoto, H., Berger, L-M., Scheitz, S. & Shakhverdova, I., 2013, Proceedings of the International Thermal Spray Conference: Thermal Spray 2013 - ITSC 2013: Innovative Coatings Solutions for the Global Economy, May 13-15, 2013, Busan, Republic of Korea. Lima, R. S., Agarwal, A., Hyland, M. M., Lau, Y-C., Mauer, G., McDonald, A. & Toma, F-L. (eds.). ASM International, p. 465-470 6 p. (International Thermal Spray Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  33. Published

    Tiivisterenkaan pinnoitteet

    Vuoristo, P., Niemi, K. & Mäntylä, T., 1992, Tampereen teknillinen korkeakoulu. 8 p. (Tampereen teknillinen korkeakoulu, Materiaalioppi, Raportti; no. 57/1992)

    Research output: Book/ReportCommissioned reportProfessional

  34. Published

    Ceramic Coatings for MHD Electrodes and Insulators

    Vuoristo, P., Mäntylä, T. & Kettunen, P., 1988, Proc. International Scientific Session on MHD Electrical Power Generation, Tampere, Finland, August 18, 1988. p. 82-84

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  35. Published

    Industrial applications and opportunities of hardmetal coatings

    Vuoristo, P. J., 2006, The EURO PM2006 Congress and Exhibition, 22-23 October, 2006, Ghent, Belgium. p. 10 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  36. Published

    Pinnoitusparametrien ja lisäaineen partikkelikoon vaikutus detonaatioruiskutetun AISI 316L -pinnoitteen rakenteeseen

    Vuoristo, P., Niemi, K., Mäkelä, A. & Mäntylä, T., 1994, Tampere: Tampereen teknillinen korkeakoulu. 15 p. (Tampereen teknillinen korkeakoulu, Materiaaliopin laitos, Raportti; no. 20/1994)

    Research output: Book/ReportCommissioned reportProfessional

  37. Published

    Structure and wear resistance of Cr3C2-NiCr coatings deposited by plasma, detonation and high-velocity oxyfuel spraying

    Vuoristo, P., Niemi, K., Mäkelä, A. & Mäntylä, T., 1994, Proc. of the 7th National Thermal Spray Conference NTSC 94, ASM International Materials Park, OH, USA. Berndt, C. C. & Sampath, S. (eds.). p. 121-126

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  38. Published

    Pinnoitteet ja valmistustekniikat, Metalliset ja keraamiset pinnoitteet

    Vuoristo, P., 1995, Materiaalitekniikka II: Materiaalinvalinta prosessiteollisuuden vaativiin kohteisiin 7.-8.11.1995, AEL Insko. p. 21 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  39. Published

    Properties of magnetron-sputtered electrically insulating Al2O3 coatings on copper

    Vuoristo, P., Mäntylä, T. & Kettunen, P., 1992, In : Journal of Materials Science. 27, p. 4985-4996

    Research output: Contribution to journalArticleScientificpeer-review

  40. Published

    Titaanidioksidijauheiden ominaisuudet ja soveltuminen termiseen ruiskutukseen

    Vuoristo, P., Sorsa, P. & Niemi, K., 1990, Tampere: Tampereen teknillinen korkeakoulu. 19 p. (Tampereen teknillinen korkeakoulu, Materiaaliopin laitos, Raportti; no. 13/1990)

    Research output: Book/ReportCommissioned reportProfessional

  41. Published

    Termiset ruiskutuspinnoitteet

    Vuoristo, P., 2000, Puun käsittelystä massan valmistukseen, 29.-30.11.200 Lahti, Kunnossapitoyhdistys ry.. p. 25 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  42. Published

    Machining of Stainless Steel Screen Plates with PVD Coated HSS Slot Milling Tools- Experimental Results

    Vuoristo, P., Niemi, K. & Mäntylä, T., 1994, Tampere: Tampere University of Technology. 27 p. (Tampere University of Technology, Institute of Materials Science, Report; no. 50/1994)

    Research output: Book/ReportCommissioned reportProfessional

  43. Published

    Muovien terminen ruiskutus

    Vuoristo, P., 2005, Erikoisseminaari, Muovi- ja elastomeeritekniikan kesäseminaari, 9.-10.6.2005, Hotelli Ellivuori, Vammala. p. 7 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  44. Published

    Structure and erosive wear properties of tungsten carbide and chromium carbide based coatings deposited by the CDS/HVOF spray system

    Vuoristo, P., Niemi, K., Mäkelä, A. & Mäntylä, T., 1993, Tampere: Tampere University of Technology. 18 p. (Tampere University of Technology, Institute of Materials Science, Report; no. 68/1993)

    Research output: Book/ReportCommissioned reportProfessional

  45. Published

    A Study of Properties of Paton Oxide Powders in Thermal Spraying

    Vuoristo, P., Niemi, K., Mäkelä, A. & Mäntylä, T., 1990, Tampere: Tampereen teknillinen korkeakoulu. 50 p. (Tampereen teknillinen korkeakoulu, Materiaaliopin laitos, Raportti; no. 14/1990)

    Research output: Book/ReportCommissioned reportProfessional

  46. Published

    Deformation and work hardening of cold-formed high strength steels at high rates of strain

    Vuoristo, T., Kuokkala, V-T., Apostol, M., Peura, P., Tulonen, J. & Pirttijoki, J., 2004, Materials Science & Technology 2004 Conference Proceedings, September 26-29, 2004, New Orleans, USA. p. 471-480

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  47. Published

    Sputteroitujen pinnoitteiden jäännösjännityksistä

    Vuoristo, P., 1985, Tampere: Tampereen teknillinen korkeakoulu. 45 p. (Tampereen teknillinen korkeakoulu, Materiaaliopin laitos, Raportti; no. 30/1985)

    Research output: Book/ReportCommissioned reportProfessional

  48. Published

    Effect of strain rate on the deformation behaviour of dual phase steels and particle reinforced polymer composites

    Vuoristo, T., 2004, Tampere: Tampere University of Technology. (Tampereen teknillinen yliopisto, Julkaisu; vol. 488)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  49. Published

    Properties of TiC-Ni and (Ti,Mo)C-NiCo Coatings Sprayed from Agglomerated and Sintered Powders

    Vuoristo, P., Stenberg, T., Mäntylä, T., Berger, L-M. & Nebelung, M., 1996, Proc. of TS96 Thermal Spraying Conference. Lugscheider, E. (ed.). Dusseldorf: DVS-Berichte Band 175, DVS-Verlag DVS-Berichte Band 175, DVS-Verlag, p. 58-61

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  50. Published

    HVOF- ja detonatioruiskuttamalla valmistettujen kovapinnotteiden ominaisuuksien vertailu - TWI:n tutkimustulokset

    Vuoristo, P. & Mäntylä, T., 1995, Tampere: Tampereen teknillinen korkeakoulu. (Tampereen teknillinen korkeakoulu, Materiaaliopin laitos, Raportti; no. 22/1995)

    Research output: Book/ReportCommissioned reportProfessional

Download list To download, please limit the number of search results to 1,000 or less.