Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. Published

    Aircraft Hydraulic System Fault Finding and Troubleshooting Using On-Line Particle Counters

    Aaltonen, J., Alarotu, V. & Koskinen, K. T., 2011, The Eight International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 20-22 June 2011, Cardiff, Wales. Northamption: British Institute of Non-destructive Testing, p. 1275-1282 (International Conference on Condition Monitoring and Machinery Failure Prevention Technologies; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  2. Published

    Simulation Based Methods for Flexible Maintenance Program Development

    Aaltonen, J., Koskinen, K. T., Vainio, H. & Martinsuo, M., 2014, EuroMaintenance 2014, Congress proceedings May 5-7, Helsinki, Finland, 22nd European Congress & Expo on Maintenance and Asset Management, 6th World Congress & Global Forum on Maintenance and Asset Management. European Federation of National Maintenance Societies, p. 446-450 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  3. Published

    Detecting and eliminating the measurement error caused by free air in aircraft hydraulic system on-line particle counting

    Aaltonen, J. & Koskinen, K. T., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Tampere: Scandinavian International Conference on Fluid Power, p. 229-240 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  4. Published

    ARC - Arktinen ajoneuvo- ja työkonetestaustoiminta

    Aaltonen, K., Haataja, M., Hietala, J-P., Leinonen, O., Moilanen, M., Multanen, P., Mäkinen, E., Petursdottir, J., Popov, M. & Väisänen, I., 2013, Oulun yliopisto. 122 p. (Oulun Yliopisto. Konetekniikan osasto. Raportti; vol. 133)

    Research output: Book/ReportCommissioned reportProfessional

  5. Published

    Process for Evaluation and Validation of Non-Original Components for Aircraft Hydraulic Systems

    Aaltonen, J., Alarotu, V., Koskinen, K. T. & Siitonen, M., 2013, Proceedings of the 4th CEAS Conference in Linköping, 2013. Melin, T., Krus, P., Vinterhav, E. & Övrebö, K. (eds.). Linköping: Linköping University Electronic Press, p. 693-699 7 p. (International Conference of the European Aerospace Societies).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  6. Published

    Concept of the electro-water-hydraulic hybrid mobile machine

    Aaltonen, J., Sairiala, H. & Koskinen, K. T., 2012, Topic water hydraulics, Dutch Fluid Power Conference, Ede, The Netherlands 13th September 2012. p. 97-111 15 p. (Dutch Fluid Power Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  7. Published

    Komponentin ja järjestelmän elinkaaren mallintaminen analyyttisillä menetelmillä

    Aaltonen, J., 2012, Hydraulijärjestelmien modernisointi, 21.-22.3.2012, Suomen ilmailumuseo, Vantaa, Kunnossapitoyhdistys. Helsinki: Kunnossapitoyhdistys ProMaint, p. 1-9 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  8. Published

    Interaction of Bootstrap Reservoir and Hydraulic Pump in Aircraft Hydraulic Systems

    Aaltonen, J., 20 Dec 2016, Tampere University of Technology. 106 p. (Tampere University of Technology. Publication; vol. 1448)

    Research output: Book/ReportDoctoral thesisMonograph

  9. Published

    Proceedings of the 1st Annual SMACC Research Seminar 2016

    Aaltonen, J. (ed.), Virkkunen, R. (ed.), Koskinen, K. T. (ed.) & Kuivanen, R. (ed.), 2 Oct 2016, Tampere: Tampere University of Technology. 113 p.

    Research output: Book/ReportAnthologyProfessional

  10. Published

    Proceedings of the 2nd Annual SMACC Research Seminar 2017

    Aaltonen, J., Koskinen, K., Virkkunen, R. & Kuivanen, R., 7 Nov 2017, Tampere: Tampere University of Technology. 62 p.

    Research output: Book/ReportAnthologyScientificpeer-review

  11. Accepted/In press

    Online stabilization of dc power distribution systems applying mimo-identification method and resonance-enhanced voltage controller

    Abdollahi, H., Roinila, T., Arrua, S. & Santi, E., 25 May 2019, (Accepted/In press) Proceedings of the 11th Annual IEEE Energy Conversion Congress and Exposition 2019, IEEE-ECCE. IEEE

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  12. Published

    Exploration of different boundary conditions in the sideways falling situation in hip fracture finite element modelling

    Abe, S., Ylinen, A., Narra Girish, N., Nikander, R., Hyttinen, J., Kouhia, R. & Sievänen, H., 2015, Proceeding of the XII Finnish Mechanics Days. Rakenteiden Mekaniikan Seura ry, p. 130-135 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  13. Published

    Exercise loading history and femoral neck strength in a sideways fall: A three-dimensional finite element modeling study.

    Abe, S., Narra, N., Nikander, R., Hyttinen, J., Kouhia, R. & Sievänen, H., 2016, In : Bone. 92, p. 9-17 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  14. Published

    Influence of exercise history on fall-induced hip fracture risk.

    Abe, S., Narra, N., Nikander, R., Hyttinen, J., Kouhia, R. & Sievänen, H., 2017, Proceeding of the 35th International Conference on Biomechanics in Sports: German Sport University Colgne, Cologne, Germany, June 14-18, 2017. Potthast, W., Niehoff, A. & David, S. (eds.). Vol. 1. p. 464-467 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  15. Published

    Association of exercise loading history with fall-induced hip fracture risk.

    Abe, S., Narra, N., Nikander, R., Hyttinen, J., Kouhia, R. & Sievänen, H., 2017.

    Research output: Other conference contributionPaper, poster or abstractScientific

  16. Published

    Impact loading history modulates hip fracture load and location: A finite element simulation study of the proximal femur in female athletes

    Abe, S., Narra Girish, N., Nikander, R., Hyttinen, J., Kouhia, R. & Sievänen, H., 25 Jul 2018, In : Journal of Biomechanics. 76, p. 136-143 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  17. Published

    DTP2 control room operator and remote handing operation designer responsibilities and information available to them

    Aha, L., Salminen, K., Hahto, A., Saarinen, H., Mattila, J., Siuko, M. & Semeraro, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 2078-2081

    Research output: Contribution to journalArticleScientificpeer-review

  18. Published

    Epäsuoran jäähdytyksen väliaineet - ominaisuudet ja niiden merkitys

    Ahlstedt, H., 2013, Kylmätekniikan koulutuspäivät, 24.1.-25.1.2013, Suomen kylmäyhdistys ry Julkaisu. Suomen kylmäyhdistys, p. 1-22 22 p. (Kylmätekniikan koulutuspäivät; no. 73).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  19. Published

    Formal modelling of complex event processing: a generic algorithm and its application to a manufacturing line

    Ahmad, W., Lobov, A. & Martinez Lastra, J. L., 2012, Proceedings of IEEE 10th International Conference on Industrial Informatics, INDIN 2012, 25-27 July, 2012, Beijing, China. Piscataway, NJ: IEEE, p. 380-385 (IEEE International Conference on Industrial Informatics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  20. Published

    Displacement controlled machines

    Ahola, V., 2011, Proceedings of the 5th GIM Scientific Workshop at Aalto University School of Electrical Engineering 29.-30.11.2011. Espoo: Aalto University, p. 124-131 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  21. Published

    Displacement controlled hydraulic systems

    Ahola, V., 2010, Proceedings of the 3rd GIM Scientific Workshop, February 17-18, 2010, Aalto University School of Science and Technology. Halme, A. & Pirttioja, T. (eds.). Espoo, p. 1-13 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  22. Published

    Käyttövarmuuden hallinta - standardista käytäntöön

    Ahonen, T., Jännes, J., Kunttu, S., Valkokari, P., Venho-Ahonen, O., Välisalo, T., Ellman, A., Hietala, J-P., Multanen, P., Mäkiranta, A., Saarinen, H. & Franssila, H., 2012, Espoo: VALTION TEKNILLINEN TUTKIMUSKESKUS. 73 p. (VTT Technology; vol. 69)

    Research output: Book/ReportCommissioned reportProfessional

  23. Published

    Method and apparatus for cooling material by atomised spray

    Ahonen, S., Karvinen, R. & Vainio, T., 31 Dec 2014, IPC No. C03B 27/ 02 A I, Patent No. CN102803520, Priority date 15 Jun 2010, Priority No. WO2010FI50499

    Research output: PatentScientific

  24. Published

    Enablers and barriers of smart data-based asset management services in industrial business networks

    Ahonen, T., Hanski, J., Hyvärinen, M., Kortelainen, H., Uusitalo, T., Vainio, H., Kunttu, S. & Koskinen, K., 2019, Lecture Notes in Mechanical Engineering. Pleiades Publishing, p. 51-60 10 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  25. Published

    Low level control system architecture for autonomous wheel loader

    Ahopelto, M., Uusisalo, J. & Huhtala, K., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Sairala, H. & Koskinen, K. T. (eds.). Tampere: Scandinavian International Conference on Fluid Power, p. 365-376 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  26. Published

    Prediction of drive torque in hydraulic wheel loader

    Ahopelto, M. & Huhtala, K., 2014, ASME/BATH 2014 Symposium on Fluid Power and Motion Control, FPMC2014, September 10-12, 2014, Bath, United Kingdom. The American Society of Mechanical Engineers ASME, p. 1-8 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  27. Published

    Power Management of Mobile Machines with Multiple Consumers

    Ahopelto, M., 2012, GIM - Generic Intelligent Machines, Proceedings of the 6th GIM Scientific Workshop, November 7-8, 2012, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). Tampere: Tampere University of Technology. Department of Intelligent Hydraulics and Automation, p. 31-37 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  28. Published

    Development process of control system

    Ahopelto, M., 2011, GIM - Generic Intelligent Machines, The 4th GIM Scientific Workshop, January 18-19, 2011, Tampere University of Technology, Tampere, Finland. Tampere: Tampere University of Technology, p. 1-7 7 p. (GIM Scientific Workshop; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  29. Published

    Improved energy efficiency and controllability of mobile work machines by reduced engine rotational speed

    Ahopelto, M., Backas, J., Ghabcheloo, R. & Huhtala, K., 2013, Proceedings of the ASME 2013 International Mechanical Engineering Congress and Exposition, IMECE2013, November 15-21, 2013, San Diego, California, USA. ASME, p. 1-8 8 p. 64239. (ASME International Mechanical Engineerig Congress and Exposition).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  30. Published

    Power management in a mobile work machine: reduced diesel rpm for better energy efficiency

    Ahopelto, M., Backas, J. & Huhtala, K., 2012, Proceedings of the 7th FPNI PhD Symposium on Fluid Power, University of Modena and Reggio Emilia, June 27-30, 2012, Reggio Emilia, Italy. Milani, M., Montorsi, L. & Paltrinieri, F. (eds.). p. 133-148 (Fluid Power Net International PhD Symposium; vol. 7).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  31. Published

    Koneenosien suunnittelu

    Airila, M., Ekman, K., Hautala, P., Kivioja, S., Kleimola, M., Martikka, H., Miettinen, J., Niemi, E., Ranta, A., Rinkinen, J., Salonen, P., Verho, A., Vilenius, M. & Välimaa, V., 2010, Unknown Publisher. 796 p.

    Research output: Book/ReportBookProfessional

  32. Published

    A simplified model of CO2-gas cooler

    Aittomäki, E. A., 2010, IIR/ Eurotherm, Sustainable Refrigeration and Heat Pump Technology Conference and 2nd IIR Workshop on Refrigerant Charge Reduction in Refrigeration Systems, Royal Institute of Technology (KTH), Stockholm, Sweden, on June 13-17, 2010. p. 1-7 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  33. Published

    Analysis of the stress raising action of flaws in laser clad deposits

    Alam, M. M., Kaplan, A. F. H., Tuominen, J., Vuoristo, P., Miettinen, J., Poutala, J., Näkki, J., Junkala, J., Peltola, T. & Barsoum, Z., 2013, In : Materials and Design. 46, April, p. 328-337 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  34. Published

    Surface pore initiated fatigue failure in laser clad components

    Alam, M. M., Powell, J., Kaplan, A. F. H., Tuominen, J., Vuoristo, P., Miettinen, J., Poutala, J., Näkki, J., Junkala, J. & Peltola, T., 2013, In : Journal of Laser Applications. 25, 3, p. 032004/1-6 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  35. Published

    Combined Virtual Iron Bird and Hardware-in-the-Loop Simulation Research Environment for Jet Fighter Hydraulic Systems

    Alarotu, V., Aaltonen, J., Koskinen, K. T. & Siitonen, M., 2013, Proceedings of the 4th CEAS Conference in Linköping, 2013. Melin, T., Krus, P., Vinterhav, E. & Övrebö, K. (eds.). Linköping: Linköping University Electronic Press, p. 196-202 7 p. (International Conference of the European Aerospace Societies; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  36. Published

    Aircraft Hydraulic Fluid On-Line Condition Monitoring System for Maintenance and Troubleshooting Purposes

    Alarotu, V., Aaltonen, J., Koskinen, K. T. & Siitonen, M., 2013, Proceedings of the 4th CEAS Conference in Linköping, 2013. Melin, T., Krus, P., Vinterhav, E. & Övrebö, K. (eds.). Linköping: Linköping University Electronic Press, p. 188-195 8 p. (International Conference of the European Aerospace Societies).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  37. Published

    Aggregated Modeling and Power Hardware-in-the-Loop Emulation of Grid Impedance

    Alenius, H., Messo, T., Reinikka, T. & Roinila, T., 6 Dec 2018, The 10th Annual IEEE Energy Conversion Congress and Exposition (ECCE 2018): September 23-27, 2018, Portland, Oregon, USA. IEEE, p. 4179-4186 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  38. Published

    Fault-tolerant scheduling of stateful tasks in uniprocessor real-time systems

    Alexeev, P., Boström, P., Walden, M., Huova, M., Linjama, M. & Sere, K., 2013, 3rd International Conference on Pervasive Embedded Computing and Communication Systems, PECCS 2013, Barcelona, Spain, 19.-21.2.2013. Benavente-Peces, C. & Filipe, J. (eds.). SCITEPRESS, p. 189-194 6 p. (International Conference on Pervasive Embedded Computing and Communication Systems).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  39. Published

    Breaking down the requirements: Reliability in remote handling software

    Alho, P. & Mattila, J., 2013, In : Fusion Engineering and Design. 88, 9-10, p. 1912-1915 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  40. Published

    Planning of Dependable Remote Handling Control System Architecture for ITER

    Alho, P., Hahto, A., Mattila, J. & Aha, L., 2011, European Nuclear Young Generation Forum, ENYGF 2011, 17.5.-22.5.2011, Praha. Prague: ENYGF, p. 1-7 7 p. (European Nuclear Young Generation Forum ENYGF).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  41. Published

    Real-Time Service-Oriented Architectures: A Data-Centric Implementation for Distributed and Heterogeneous Robotic System

    Alho, P. & Mattila, J., 2013, Proceedings of the 4th IFIP TC 10 International Embedded Systems Symposium, IESS 2013, Paderborn, Germany, June 2013.. Schirner, G., Götz, M., Rettberg, A., Zanella, M. C. & Rammig, F. J. (eds.). Springer, p. 262-271 10 p. (IFIP Advances in Information and Communication Technology; vol. 403).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  42. Published

    Software fault detection and recovery in critical real-time systems: An approach based on loose coupling

    Alho, P. & Mattila, J., 2014, In : Fusion Engineering and Design. 89, 9-10, p. 2272-2277 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  43. Published

    Service-based Fault Tolerance for Cyber-Physical Systems: A Systems Engineering Approach

    Alho, P., 11 Dec 2015, Tampere University of Technology. 104 p. (Tampere University of Technology. Publication; vol. 1353)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  44. Published

    A Novel Coaxially Laser-Assisted (COLA) Cold Spray System

    Allen, C., Marrocco, T., McNutt, P., Koivuluoto, H., Latokartano, J., Vuoristo, P. & Olsson, R., 2015, ITSC2015: International Thermal Spray Conference, May 11-14, 2015, Long Beach, California, USA. p. 210-216 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  45. Published

    Survey on Remote Handling Logistics for Super-FRS Regular Paper

    Amjad, F., Weick, H., Mattila, J., Orona, L. M., Kozlova, E., Winkler, M., Behr, K-H. & Karagiannis, C., 2013, In : international Journal of Advanced Robotic Systems. 10, p. 1-14 14 p., 348.

    Research output: Contribution to journalArticleScientificpeer-review

  46. Published

    Methodology for evaluating the production accuracy of machine tools

    Andersson, P. H., 1992, Tampere: Tampere University of Technology. 121 p. (Tampereen teknillinen korkeakoulu. Julkaisuja; vol. 102)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  47. Published

    Deep Learning of Robotic Manipulator Structures by Convolutional Neural Network

    Aref, M. M. & Mattila, J., Nov 2018, 2018 Ninth International Conference on Intelligent Control and Information Processing (ICICIP). IEEE, p. 236-242 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  48. Published

    Simulation of residual stresses and deformations in electron beam-welded copper canisters

    Aronen, A., Leikko, J., Taskinen, P. & Karvinen, R., 2013, Olkiluoto: Posiva. 68 p. (Posiva Working Report; no. 20)

    Research output: Book/ReportCommissioned reportProfessional

  49. Published

    Improvement of Quality of tempered Glass with Numerical Modeling

    Aronen, A. & Karvinen, R., 2012, Challenging Glass 3, Conference on Architectural and Structural Applications of Glass, 28-29 June 2012, Delft, The Netherlands. Bos, F., Louter, C., Nijsse, R. & Veer, F. (eds.). Amsterdam, The Netherlands: IOS Press, p. 363-372 (Conference on Architectural and Structural Applications of Glass).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  50. Published

    Lasin karkaisun laatuongelmat

    Aronen, A., 2011, In : Rakenteiden mekaniikka. 44, 2, p. 140-155

    Research output: Contribution to journalArticleScientificpeer-review

Previous 1 2 3 4 5 6 7 8 ...25 Next
Download list To download, please limit the number of search results to 1,000 or less.