Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. Published

    Aircraft Hydraulic System Fault Finding and Troubleshooting Using On-Line Particle Counters

    Aaltonen, J., Alarotu, V. & Koskinen, K. T., 2011, The Eight International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 20-22 June 2011, Cardiff, Wales. Northamption: British Institute of Non-destructive Testing, p. 1275-1282 (International Conference on Condition Monitoring and Machinery Failure Prevention Technologies; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  2. Published

    Simulation Based Methods for Flexible Maintenance Program Development

    Aaltonen, J., Koskinen, K. T., Vainio, H. & Martinsuo, M., 2014, EuroMaintenance 2014, Congress proceedings May 5-7, Helsinki, Finland, 22nd European Congress & Expo on Maintenance and Asset Management, 6th World Congress & Global Forum on Maintenance and Asset Management. European Federation of National Maintenance Societies, p. 446-450 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  3. Published

    Detecting and eliminating the measurement error caused by free air in aircraft hydraulic system on-line particle counting

    Aaltonen, J. & Koskinen, K. T., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Tampere: Scandinavian International Conference on Fluid Power, p. 229-240 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  4. Published

    ARC - Arktinen ajoneuvo- ja työkonetestaustoiminta

    Aaltonen, K., Haataja, M., Hietala, J-P., Leinonen, O., Moilanen, M., Multanen, P., Mäkinen, E., Petursdottir, J., Popov, M. & Väisänen, I., 2013, Oulun yliopisto. 122 p. (Oulun Yliopisto. Konetekniikan osasto. Raportti; vol. 133)

    Research output: Book/ReportCommissioned reportProfessional

  5. Published

    Process for Evaluation and Validation of Non-Original Components for Aircraft Hydraulic Systems

    Aaltonen, J., Alarotu, V., Koskinen, K. T. & Siitonen, M., 2013, Proceedings of the 4th CEAS Conference in Linköping, 2013. Melin, T., Krus, P., Vinterhav, E. & Övrebö, K. (eds.). Linköping: Linköping University Electronic Press, p. 693-699 7 p. (International Conference of the European Aerospace Societies).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  6. Published

    Concept of the electro-water-hydraulic hybrid mobile machine

    Aaltonen, J., Sairiala, H. & Koskinen, K. T., 2012, Topic water hydraulics, Dutch Fluid Power Conference, Ede, The Netherlands 13th September 2012. p. 97-111 15 p. (Dutch Fluid Power Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  7. Published

    Komponentin ja järjestelmän elinkaaren mallintaminen analyyttisillä menetelmillä

    Aaltonen, J., 2012, Hydraulijärjestelmien modernisointi, 21.-22.3.2012, Suomen ilmailumuseo, Vantaa, Kunnossapitoyhdistys. Helsinki: Kunnossapitoyhdistys ProMaint, p. 1-9 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  8. Published

    Interaction of Bootstrap Reservoir and Hydraulic Pump in Aircraft Hydraulic Systems

    Aaltonen, J., 20 Dec 2016, Tampere University of Technology. 106 p. (Tampere University of Technology. Publication; vol. 1448)

    Research output: Book/ReportDoctoral thesisMonograph

  9. Published

    Proceedings of the 1st Annual SMACC Research Seminar 2016

    Aaltonen, J. (ed.), Virkkunen, R. (ed.), Koskinen, K. T. (ed.) & Kuivanen, R. (ed.), 2 Oct 2016, Tampere: Tampere University of Technology. 113 p.

    Research output: Book/ReportAnthologyProfessional

  10. Published

    Proceedings of the 2nd Annual SMACC Research Seminar 2017

    Aaltonen, J., Koskinen, K., Virkkunen, R. & Kuivanen, R., 7 Nov 2017, Tampere: Tampere University of Technology. 62 p.

    Research output: Book/ReportAnthologyScientificpeer-review

  11. Accepted/In press

    Online stabilization of dc power distribution systems applying mimo-identification method and resonance-enhanced voltage controller

    Abdollahi, H., Roinila, T., Arrua, S. & Santi, E., 25 May 2019, (Accepted/In press) Proceedings of the 11th Annual IEEE Energy Conversion Congress and Exposition 2019, IEEE-ECCE: Sept. 29 - Oct. 3 2019, Baltimore, Maryland, USA. IEEE

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  12. Published

    Exploration of different boundary conditions in the sideways falling situation in hip fracture finite element modelling

    Abe, S., Ylinen, A., Narra Girish, N., Nikander, R., Hyttinen, J., Kouhia, R. & Sievänen, H., 2015, Proceeding of the XII Finnish Mechanics Days. Rakenteiden Mekaniikan Seura ry, p. 130-135 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  13. Published

    Exercise loading history and femoral neck strength in a sideways fall: A three-dimensional finite element modeling study.

    Abe, S., Narra, N., Nikander, R., Hyttinen, J., Kouhia, R. & Sievänen, H., 2016, In : Bone. 92, p. 9-17 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  14. Published

    Influence of exercise history on fall-induced hip fracture risk.

    Abe, S., Narra, N., Nikander, R., Hyttinen, J., Kouhia, R. & Sievänen, H., 2017, Proceeding of the 35th International Conference on Biomechanics in Sports: German Sport University Colgne, Cologne, Germany, June 14-18, 2017. Potthast, W., Niehoff, A. & David, S. (eds.). Vol. 1. p. 464-467 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  15. Published

    Association of exercise loading history with fall-induced hip fracture risk.

    Abe, S., Narra, N., Nikander, R., Hyttinen, J., Kouhia, R. & Sievänen, H., 2017.

    Research output: Other conference contributionPaper, poster or abstractScientific

  16. Published

    Impact loading history modulates hip fracture load and location: A finite element simulation study of the proximal femur in female athletes

    Abe, S., Narra Girish, N., Nikander, R., Hyttinen, J., Kouhia, R. & Sievänen, H., 25 Jul 2018, In : Journal of Biomechanics. 76, p. 136-143 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  17. Published

    DTP2 control room operator and remote handing operation designer responsibilities and information available to them

    Aha, L., Salminen, K., Hahto, A., Saarinen, H., Mattila, J., Siuko, M. & Semeraro, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 2078-2081

    Research output: Contribution to journalArticleScientificpeer-review

  18. Published

    Epäsuoran jäähdytyksen väliaineet - ominaisuudet ja niiden merkitys

    Ahlstedt, H., 2013, Kylmätekniikan koulutuspäivät, 24.1.-25.1.2013, Suomen kylmäyhdistys ry Julkaisu. Suomen kylmäyhdistys, p. 1-22 22 p. (Kylmätekniikan koulutuspäivät; no. 73).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  19. Published

    Formal modelling of complex event processing: a generic algorithm and its application to a manufacturing line

    Ahmad, W., Lobov, A. & Martinez Lastra, J. L., 2012, Proceedings of IEEE 10th International Conference on Industrial Informatics, INDIN 2012, 25-27 July, 2012, Beijing, China. Piscataway, NJ: IEEE, p. 380-385 (IEEE International Conference on Industrial Informatics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  20. Published

    Displacement controlled machines

    Ahola, V., 2011, Proceedings of the 5th GIM Scientific Workshop at Aalto University School of Electrical Engineering 29.-30.11.2011. Espoo: Aalto University, p. 124-131 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  21. Published

    Displacement controlled hydraulic systems

    Ahola, V., 2010, Proceedings of the 3rd GIM Scientific Workshop, February 17-18, 2010, Aalto University School of Science and Technology. Halme, A. & Pirttioja, T. (eds.). Espoo, p. 1-13 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  22. Published

    Käyttövarmuuden hallinta - standardista käytäntöön

    Ahonen, T., Jännes, J., Kunttu, S., Valkokari, P., Venho-Ahonen, O., Välisalo, T., Ellman, A., Hietala, J-P., Multanen, P., Mäkiranta, A., Saarinen, H. & Franssila, H., 2012, Espoo: VALTION TEKNILLINEN TUTKIMUSKESKUS. 73 p. (VTT Technology; vol. 69)

    Research output: Book/ReportCommissioned reportProfessional

  23. Published

    Method and apparatus for cooling material by atomised spray

    Ahonen, S., Karvinen, R. & Vainio, T., 31 Dec 2014, IPC No. C03B 27/ 02 A I, Patent No. CN102803520, Priority date 15 Jun 2010, Priority No. WO2010FI50499

    Research output: PatentScientific

  24. Published

    Enablers and barriers of smart data-based asset management services in industrial business networks

    Ahonen, T., Hanski, J., Hyvärinen, M., Kortelainen, H., Uusitalo, T., Vainio, H., Kunttu, S. & Koskinen, K., 2019, Lecture Notes in Mechanical Engineering. Pleiades Publishing, p. 51-60 10 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  25. Published

    Low level control system architecture for autonomous wheel loader

    Ahopelto, M., Uusisalo, J. & Huhtala, K., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Sairala, H. & Koskinen, K. T. (eds.). Tampere: Scandinavian International Conference on Fluid Power, p. 365-376 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  26. Published

    Prediction of drive torque in hydraulic wheel loader

    Ahopelto, M. & Huhtala, K., 2014, ASME/BATH 2014 Symposium on Fluid Power and Motion Control, FPMC2014, September 10-12, 2014, Bath, United Kingdom. The American Society of Mechanical Engineers ASME, p. 1-8 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  27. Published

    Power Management of Mobile Machines with Multiple Consumers

    Ahopelto, M., 2012, GIM - Generic Intelligent Machines, Proceedings of the 6th GIM Scientific Workshop, November 7-8, 2012, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). Tampere: Tampere University of Technology. Department of Intelligent Hydraulics and Automation, p. 31-37 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  28. Published

    Development process of control system

    Ahopelto, M., 2011, GIM - Generic Intelligent Machines, The 4th GIM Scientific Workshop, January 18-19, 2011, Tampere University of Technology, Tampere, Finland. Tampere: Tampere University of Technology, p. 1-7 7 p. (GIM Scientific Workshop; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  29. Published

    Improved energy efficiency and controllability of mobile work machines by reduced engine rotational speed

    Ahopelto, M., Backas, J., Ghabcheloo, R. & Huhtala, K., 2013, Proceedings of the ASME 2013 International Mechanical Engineering Congress and Exposition, IMECE2013, November 15-21, 2013, San Diego, California, USA. ASME, p. 1-8 8 p. 64239. (ASME International Mechanical Engineerig Congress and Exposition).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  30. Published

    Power management in a mobile work machine: reduced diesel rpm for better energy efficiency

    Ahopelto, M., Backas, J. & Huhtala, K., 2012, Proceedings of the 7th FPNI PhD Symposium on Fluid Power, University of Modena and Reggio Emilia, June 27-30, 2012, Reggio Emilia, Italy. Milani, M., Montorsi, L. & Paltrinieri, F. (eds.). p. 133-148 (Fluid Power Net International PhD Symposium; vol. 7).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  31. Published

    Koneenosien suunnittelu

    Airila, M., Ekman, K., Hautala, P., Kivioja, S., Kleimola, M., Martikka, H., Miettinen, J., Niemi, E., Ranta, A., Rinkinen, J., Salonen, P., Verho, A., Vilenius, M. & Välimaa, V., 2010, Unknown Publisher. 796 p.

    Research output: Book/ReportBookProfessional

  32. Published

    A simplified model of CO2-gas cooler

    Aittomäki, E. A., 2010, IIR/ Eurotherm, Sustainable Refrigeration and Heat Pump Technology Conference and 2nd IIR Workshop on Refrigerant Charge Reduction in Refrigeration Systems, Royal Institute of Technology (KTH), Stockholm, Sweden, on June 13-17, 2010. p. 1-7 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  33. Published

    Analysis of the stress raising action of flaws in laser clad deposits

    Alam, M. M., Kaplan, A. F. H., Tuominen, J., Vuoristo, P., Miettinen, J., Poutala, J., Näkki, J., Junkala, J., Peltola, T. & Barsoum, Z., 2013, In : Materials and Design. 46, April, p. 328-337 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  34. Published

    Surface pore initiated fatigue failure in laser clad components

    Alam, M. M., Powell, J., Kaplan, A. F. H., Tuominen, J., Vuoristo, P., Miettinen, J., Poutala, J., Näkki, J., Junkala, J. & Peltola, T., 2013, In : Journal of Laser Applications. 25, 3, p. 032004/1-6 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  35. Published

    Combined Virtual Iron Bird and Hardware-in-the-Loop Simulation Research Environment for Jet Fighter Hydraulic Systems

    Alarotu, V., Aaltonen, J., Koskinen, K. T. & Siitonen, M., 2013, Proceedings of the 4th CEAS Conference in Linköping, 2013. Melin, T., Krus, P., Vinterhav, E. & Övrebö, K. (eds.). Linköping: Linköping University Electronic Press, p. 196-202 7 p. (International Conference of the European Aerospace Societies; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  36. Published

    Aircraft Hydraulic Fluid On-Line Condition Monitoring System for Maintenance and Troubleshooting Purposes

    Alarotu, V., Aaltonen, J., Koskinen, K. T. & Siitonen, M., 2013, Proceedings of the 4th CEAS Conference in Linköping, 2013. Melin, T., Krus, P., Vinterhav, E. & Övrebö, K. (eds.). Linköping: Linköping University Electronic Press, p. 188-195 8 p. (International Conference of the European Aerospace Societies).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  37. Published

    Aggregated Modeling and Power Hardware-in-the-Loop Emulation of Grid Impedance

    Alenius, H., Messo, T., Reinikka, T. & Roinila, T., 6 Dec 2018, The 10th Annual IEEE Energy Conversion Congress and Exposition (ECCE 2018): September 23-27, 2018, Portland, Oregon, USA. IEEE, p. 4179-4186 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  38. Published

    Fault-tolerant scheduling of stateful tasks in uniprocessor real-time systems

    Alexeev, P., Boström, P., Walden, M., Huova, M., Linjama, M. & Sere, K., 2013, 3rd International Conference on Pervasive Embedded Computing and Communication Systems, PECCS 2013, Barcelona, Spain, 19.-21.2.2013. Benavente-Peces, C. & Filipe, J. (eds.). SCITEPRESS, p. 189-194 6 p. (International Conference on Pervasive Embedded Computing and Communication Systems).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  39. Published

    Breaking down the requirements: Reliability in remote handling software

    Alho, P. & Mattila, J., 2013, In : Fusion Engineering and Design. 88, 9-10, p. 1912-1915 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  40. Published

    Planning of Dependable Remote Handling Control System Architecture for ITER

    Alho, P., Hahto, A., Mattila, J. & Aha, L., 2011, European Nuclear Young Generation Forum, ENYGF 2011, 17.5.-22.5.2011, Praha. Prague: ENYGF, p. 1-7 7 p. (European Nuclear Young Generation Forum ENYGF).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  41. Published

    Real-Time Service-Oriented Architectures: A Data-Centric Implementation for Distributed and Heterogeneous Robotic System

    Alho, P. & Mattila, J., 2013, Proceedings of the 4th IFIP TC 10 International Embedded Systems Symposium, IESS 2013, Paderborn, Germany, June 2013.. Schirner, G., Götz, M., Rettberg, A., Zanella, M. C. & Rammig, F. J. (eds.). Springer, p. 262-271 10 p. (IFIP Advances in Information and Communication Technology; vol. 403).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  42. Published

    Software fault detection and recovery in critical real-time systems: An approach based on loose coupling

    Alho, P. & Mattila, J., 2014, In : Fusion Engineering and Design. 89, 9-10, p. 2272-2277 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  43. Published

    Service-based Fault Tolerance for Cyber-Physical Systems: A Systems Engineering Approach

    Alho, P., 11 Dec 2015, Tampere University of Technology. 104 p. (Tampere University of Technology. Publication; vol. 1353)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  44. Published

    A Novel Coaxially Laser-Assisted (COLA) Cold Spray System

    Allen, C., Marrocco, T., McNutt, P., Koivuluoto, H., Latokartano, J., Vuoristo, P. & Olsson, R., 2015, ITSC2015: International Thermal Spray Conference, May 11-14, 2015, Long Beach, California, USA. p. 210-216 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  45. Published

    Survey on Remote Handling Logistics for Super-FRS Regular Paper

    Amjad, F., Weick, H., Mattila, J., Orona, L. M., Kozlova, E., Winkler, M., Behr, K-H. & Karagiannis, C., 2013, In : international Journal of Advanced Robotic Systems. 10, p. 1-14 14 p., 348.

    Research output: Contribution to journalArticleScientificpeer-review

  46. Published

    Methodology for evaluating the production accuracy of machine tools

    Andersson, P. H., 1992, Tampere: Tampere University of Technology. 121 p. (Tampereen teknillinen korkeakoulu. Julkaisuja; vol. 102)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  47. Published

    Deep Learning of Robotic Manipulator Structures by Convolutional Neural Network

    Aref, M. M. & Mattila, J., Nov 2018, 2018 Ninth International Conference on Intelligent Control and Information Processing (ICICIP). IEEE, p. 236-242 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  48. Published

    Simulation of residual stresses and deformations in electron beam-welded copper canisters

    Aronen, A., Leikko, J., Taskinen, P. & Karvinen, R., 2013, Olkiluoto: Posiva. 68 p. (Posiva Working Report; no. 20)

    Research output: Book/ReportCommissioned reportProfessional

  49. Published

    Improvement of Quality of tempered Glass with Numerical Modeling

    Aronen, A. & Karvinen, R., 2012, Challenging Glass 3, Conference on Architectural and Structural Applications of Glass, 28-29 June 2012, Delft, The Netherlands. Bos, F., Louter, C., Nijsse, R. & Veer, F. (eds.). Amsterdam, The Netherlands: IOS Press, p. 363-372 (Conference on Architectural and Structural Applications of Glass).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  50. Published

    Lasin karkaisun laatuongelmat

    Aronen, A., 2011, In : Rakenteiden mekaniikka. 44, 2, p. 140-155

    Research output: Contribution to journalArticleScientificpeer-review

  51. Published

    Tempering of thin glass

    Aronen, A. & Karvinen, R., 2012, Glass. Facade. Energy. Engineered transparency; International conference at glasstec, 25.10.2012 - 26.10.2012, Dusseldorf, Germany. Schneider, J. & Weller, B. (eds.). Technische Universität Darmstadt; Technische Univärsität Dresden; www.engineered-transparency.eu, p. 145-153 (Engineered transparency).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  52. Published

    Mechanical Glass Tempering - Present Products and Future Challenges

    Aronen, A. & Karvinen, R., 2011, GPD Glass Performance Days 2011, 12th International Conference on Architectural and Automotive Glass, 17-20 June 2011, Tampere, Finland. Vitkala, J. (ed.). Tampere: International Conference on Architectural and Automotive Glass, p. 122-125 (International Conference on Architectural and Automotive Glass GPD Glass Performance Days).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  53. Published

    Modeling of deformations and stresses during glass tempering

    Aronen, A. & Karvinen, R., 2011, ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE2011, November 11-17, 2011, Denver, Colorado, USA. New York, NY: ASME, p. 1-9 9 p. (ASME International Mechanical Engineering Congress and Exposition IMECE2011).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  54. Published

    Effect of asymmetric heat transfer on glass deformations

    Aronen, A., 2010, Conference on Architectural and Structural Applications of Glass Faculty of Architecture, Challenging Glass 2, Delft University of Technology, 20-21 May 2010, the Netherlands. Bos, F., Louter, C. & Veer, F. (eds.). p. 279-285

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  55. Published

    Effect of glass temperature before cooling and cooling rate on residual stresses in tempering

    Aronen, A. & Karvinen, R., Mar 2018, In : Glass Structures Engineering. 3, 1, p. 3-15

    Research output: Contribution to journalArticleScientificpeer-review

  56. Published

    Automated control system for indoor air quality management

    Aslam, Z., Khalid, W., Ahmed, T. & Marghoob, D., 1 Nov 2017, 2017 International Conference on Energy Conservation and Efficiency (ICECE). IEEE, p. 85-88 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  57. Published

    Standard development of ANSI/IPC-2546 Am2. ANSI/IPC-2546 Am2: Sectional Requirements for Shop-Floor Equipment Communication Messages (CAMX) for Printed Circuit Board Assembly. Amendment 2 - Dispensing Equipment, Reflow Equipment and Final Assembly and Packaging sections

    Aube, S., Baggio, T., Breche, J., Burmeister, C., Camargo, J., Dugenske, A. D., Fraser, A., Hyvärinen, J., Karhumäki, O., Ludwig, E., Morris, D. J., Niemi, T., Ronkainen, H., Rubow, B., Siltala, N., Urho, M. & Voitus, R., 2005, Bannockburn, IL: ANSI/IPC. 124 p.

    Research output: Book/ReportBookScientificpeer-review

  58. Published

    Remote support for maintenance tasks by the use of Augmented Reality: the ManuVAR project

    Azpiazu, J., Siltanen, S., Multanen, P., Mäkiranta, A., Barrena, N., Diez, A., Agirre, J. & Smith, T., 2011, Proceedings of the 9th Congress on Virtual Reality Applications, CARVI 2011. San Sebastian: Tecnalia, p. 1-6 6 p. (Congress on Virtual Reality Applications CARVI; vol. 9).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  59. Published

    IHA-machine: a future mobile machine

    Backas, J., Ahopelto, M., Huova, M., Vuohijoki, A., Karhu, O., Ghabcheloo, R. & Huhtala, K., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Tampere: Scandinavian International Conference on Fluid Power, p. 161-176 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  60. Published

    Modelling the efficiencies of hydraulic pumps with neural networks

    Backas, J. & Huhtala, K., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Sairala, H. & Koskinen, K. T. (eds.). Tampere: Scandinavian International Conference on Fluid Power, p. 11-24 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  61. Published

    Fuel optimal controller for hydrostatic drives: A simulation study and model validation

    Backas, J., Ghabcheloo, R., Hyvönen, M. & Huhtala, K., 2014, ASME/BATH 2014 Symposium on Fluid Power and Motion Control, FPMC2014, September 10-12, 2014, Bath, United Kingdom. The American Society of Mechanical Engineers ASME, p. 1-11 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  62. Published

    Research of optimizing the prime mover and hydraulics of mobile machines

    Backas, J., 2011, GIM - Generic Intelligent Machines, The 4th GIM Scientific Workshop, January 18-19, 2011, Tampere University of Technology, Tampere, Finland. Tampere: Tampere University of Technology, p. 1-5 5 p. (GIM Scientific Workshop; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  63. Published

    An Optimal Controller for Hydrostatic Drives

    Backas, J., 2012, GIM - Generic Intelligent Machines, Proceedings of the 6th GIM Scientific Workshop, November 7-8, 2012, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). Tampere: Tampere University of Technology. Department of Intelligent Hydraulics and Automation, p. 83-88 (Generic Intelligent Machines Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  64. Published

    Gain Scheduling Full State Feedback with D-Implementation for Velocity Tracking of Hydrostatic Drive Transmission

    Backas, J., Ghabcheloo, R. & Huhtala, K., 2015, Proceedings of the Fourteenth Scandinavian International Conference on Fluid Power, SICFP15. May 20-22, 2015. Tampere, Finland. Tampere University of Technology. Department of Intelligent Hydraulics and Automation, p. 64-75 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  65. Published

    Gain scheduled state feedback velocity control of hydrostatic drive transmissions

    Backas, J., Ghabcheloo, R. & Huhtala, K., Jan 2017, In : Control Engineering Practice. 58, p. 214-224

    Research output: Contribution to journalArticleScientificpeer-review

  66. Published

    Nonlinear model predictive energy management of hydrostatic drive transmissions

    Backas, J. & Ghabcheloo, R., 1 Mar 2019, In : Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering. 233, 3, p. 335-347

    Research output: Contribution to journalArticleScientificpeer-review

  67. Published

    Is what you see really what you get? - Case study of virtual prototyping in designing the production process

    Becker, I. & Toivonen, V., 2011, 22nd Symposium on Design for X, 11-12 October, 2011, Tutzing, Germany. Glasgow: The Design Society, p. 253-264 (Symposium on Design for X).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  68. Published

    Using virtual reality in designing the assembly process of a car

    Becker, I., Toivonen, V. & Leino, S-P., 2011, Proceedings of the 18th International Conference on Engineering Design, ICED 11, 15-18 August, 2011, Technical University of Denmark, Copenhagen, Denmark. Culley, S. J., Hicks, B. J., McAloone, T. C., Howard, T. J. & Clarkson, J. (eds.). Glasgow: The Design Society, p. 91-100 (International Conference on Engineering Design ICED; vol. 9).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  69. Published

    A Flow Model for Contract Car Manufacturing Project

    Becker, I., 18 Aug 2016, Tampere University of Technology. 141 p. (Tampere University of Technology. Publication; vol. 1397)

    Research output: Book/ReportDoctoral thesisMonograph

  70. Published

    Big data analytics for the Future Circular Collider reliability and availability studies

    Begy, V., Apollonio, A., Gutleber, J., Martin-Marquez, M., Niemi, A., Penttinen, J-P., Rogova, E., Romero-Marin, A. & Sollander, P., 23 Nov 2017, 22nd International Conference on Computing in High Energy and Nuclear Physics (CHEP2016). IOP Publishing, ( Journal of Physics: Conference Series; vol. 898).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  71. Published

    Magnetomechanical Coupled FE Simulations of Rotating Electrical Machines

    Belahceen, A., Fonteyn, K., Kouhia, R., Rasilo, P. & Arkkio, A., 2012, 15th International IGTE Symposium on Numerical Field Calculations in Electrical Engineering, 16-19.2012, Graz, Austria. Institut für Grundlagen und Theorie der Elektrotechnik - IGTE, Technische Universität Graz, Austria, p. 1-6 6 p. (International IGTE Symposium on Numerical Field Calculations in Electrical Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  72. Published

    Magnetomechanical coupled FE simulations of rotating electrical machines

    Belahcen, A., Fonteyn, K., Kouhia, R., Rasilo, P. & Arkkio, A., 2013, In : COMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic Engineering. 32, 5, p. 1484-1499 16 p., 17095978.

    Research output: Contribution to journalArticleScientificpeer-review

  73. Published

    A model for anisotropic magnetostriction

    Belahcen, A., Kouhia, R., Rasilo, P. & Ristinmaa, M., 2015, Proceedings of the XII Finnish Mechanics Days. Rakenteiden Mekaniikan Seura ry, p. 201-203 3 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  74. Published

    Prerequisites and conditions for socially sustainable manufacturing in Europe’s future factories—results overview from the SO SMART project

    Berlin, C., Barletta, I., Fantini, P., Georgoulias, K., Hansich, C., Lanz, M., Latokartano, J., Pinzone, M., Schönborn, G., Stahre, J., Taisch, M. & Tuokko, R., 2016, Advances in Ergonomics of Manufacturing: Managing the Enterprise of the Future - Proceedings of the AHFE International Conference on Human Aspects of Advanced Manufacturing, 2016. Springer Verlag, Vol. 490. p. 319-330 12 p. (Advances in Intelligent Systems and Computing; vol. 490).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  75. Published

    Discovering material recovery scenarios for industrial machinery: A case-based approach

    Bernstein, W. Z., Ramanujan, D., Koho, M., Zhao, F. & Ramani, K., 2012, ASME 2012 International Manufacturing Science and Engineering Conference (MSEC) collocated with the 40th North American Manufacturing Research Conference and in participation with the International Conference on Tribology Materials and Processing, Notre Dame, IN, USA, 4-8 June, 2012. ASME, p. 1097-1104 8 p. (ASME International Manufacturing Science and Engineering Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  76. Published

    Energy efficiency improvement through context sensitive self-learning of machine availability

    Bittencourt, J. L., Bonefeld, R., Scholze, S., Stokic, G., Uddin, M. K. & Martinez Lastra, J. L., 2011, IEEE 9th International Conference on Industrial Informatics, INDIN 2011, 26-29 July, 2011, Caparica, Lisbon, Portugal. Piscataway, NJ: IEEE, p. 93-98 (International Conference on Industrial Informatics INDIN).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  77. Published

    Local compression behaviour of moist wood at quasi static state

    Björkqvist, T., Moilanen, C., Saarenrinne, P., Koivisto, J., Miksic, A., Alava, M., Salminen, L. & Engberg, B. A., 2013, 8th International Fundamental Mechanical Pulp Research Seminar, 29 - 31 January, 2013, Åre, Sweden. p. 47-48 2 p. (International Fundamental Mechanical Pulp Research Seminar).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  78. Published

    A Method and an Apparatus for Producing Nanocellulose

    Björkqvist, T., Koskinen, T., Nuopponen, M., Vehniäinen, A. & Gustafsson, H., 18 Feb 2015, IPC No. D21H 11/ 18 A I, Patent No. EP2659061, Priority date 31 Dec 2010, Priority No. FI 20106402

    Research output: PatentScientific

  79. Published

    Method and an Apparatus for Producing Nanocellulose

    Björkqvist, T., Gustafsson, H., Koskinen, T., Nuopponen, M., Vehniäinen, A. & Gustafsson, S., 3 Feb 2015, IPC No. D21B 1/ 12 A I, Patent No. US8945346, Priority date 31 Dec 2010, Priority No. FI 20106402

    Research output: PatentScientific

  80. Published

    Analysis of Real-Time Properties of a Digital Hydraulic Power Management System

    Boström, P., Alexeev, P., Heikkilä, M., Huova, M., Waldén, M. & Linjama, M., 2014, 19th International Conference, FMICS 2014, Florence, Italy, September 11-12, 2014.. Springer International Publishing, p. 33-47 15 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  81. Published

    Development of Controllers Using Simulink and Contract-Based Design. Chapter 8

    Boström, P., Huova, M., Olszewska, M., Linjama, M., Heikkilä, M., Sere, K. & Walden, M., 2011, Dependability and Computer Engineering: Concepts for Software-Intensive Systems. Petre, L., Sere, K. & Troubitsyna, E. (eds.). Hershey, PA: IGI Global, p. 151-169

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  82. Published

    Verification and Validation of a Pressure Control Unit for Hydraulic Systems

    Boström, P., Heikkilä, M., Huova, M., Waldén, M. & Linjama, M., 2014, 6th International Workshop, SERENE 2014, Budapest, Hungary, October 15-16, 2014. Springer International Publishing, p. 101-115 15 p. (Lecture Notes in Computer Science; vol. 8785).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  83. Published

    Design synthesis: integrated product and manufacturing system design

    Britton, G. & Torvinen, S., 2014, CRC Press. 358 p.

    Research output: Book/ReportBookScientificpeer-review

  84. Published

    Implementing circulating oil lubrication systems based on the IMC-AESOP architecture

    Camp, R. & Lobov, A., 2014, Industrial cloud-based cyber-physical systems. The IMC-AESOP approach. Colombo, A. W., Bangemann, T., Karnouskos, S., Delsing, J., Stluka, P., Harrison, R., Jammes, F. & Martinez Lastra, J. L. (eds.). Springer, p. 183-202 20 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  85. Published

    Preliminary concept design of the divertor remote handling system for DEMO power plant

    Carfora, D., Di Gironimo, G., Järvenpää, J., Huhtala, K., Määttä, T. & Siuko, M., 2014, In : Fusion Engineering and Design. 89, 11, p. 2743-2747 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  86. Published

    Image Stitching Based Measurements of Medical Screws

    Cenev, Z., Prusi, T. & Tuokko, R., 2014, Precision Assembly Technologies and Systems. 7th IFIP WG 5.5 International Precision Assembly Seminar, IPAS 2014, Chamonix, France, February 16-18, 2014, Revised Selected Papers. Ratchev, S. (ed.). Springer Berlin Heidelberg, p. 69-78 10 p. (IFIP Advances in Information and Communication Technology; vol. 435).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  87. Published

    Comfort Design in Human Robot Cooperative Tasks

    Changizi, A., Dianatfar, M. & Lanz, M., 2019, Human Systems Engineering and Design - Proceedings of the 1st International Conference on Human Systems Engineering and Design IHSED2018: Future Trends and Applications. Springer Verlag, p. 521-526 6 p. (Advances in Intelligent Systems and Computing; vol. 876).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  88. Published

    The comfort zone concept in a human-robot cooperative task

    Changizi, A. & Lanz, M., 2019, Precision Assembly in the Digital Age - 8th IFIP WG 5.5 International Precision Assembly Seminar, IPAS 2018, Revised Selected Papers. Springer New York LLC, Vol. 530. p. 82-91 10 p. (IFIP Advances in Information and Communication Technology; vol. 530).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  89. Published

    Friction characteristics of a multi-chamber cylinder for digital hydraulics

    Cho, S. H., Niemi-Pynttäri, O. & Linjama, M., 2016, In : Proceedings of the institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science. 230, 5, p. 685-698 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  90. Published

    Minimizing the Maximum Curvature of Quadratic Bezier Curves with a Tetragonal Concave Polygonal Boundary Constraint

    Choi, J., Curry, R. E. & Elkaim, G. H., 2011, In : Computer-Aided Design. 44, 4, p. 1-22 22 p.

    Research output: Contribution to journalArticleScientificpeer-review

  91. Published

    Kinodynamic Motion Planning for Autonomous Vehicles

    Choi, J., 2014, In : international Journal of Advanced Robotic Systems. 11, 90, p. 1-14 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  92. Published

    A Potential Field and Bug Compound Navigation Algorithm for Nonholonomic Wheeled Robots

    Choi, J-W., 2012, ICIES2012, The 1st International Conference on Innovative Engineering, 7-9 December 2012, Alexandria, Egypt,. Institute of Electrical and Electronics Engineers IEEE, p. 166-171 6 p. (International Conference on Innovative Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  93. Published

    An Efficient Heuristic Estimate for Non-holonomic Motion Planning

    Choi, J-W., 2012, The 4th Workshop on Planning, Perception and Navigation for Intelligent Vehicles, October 7th, 2012 Vilamoura, Algarve, Portugal. p. 1-6 6 p. (Workshop on Planning, Perception and Navigation for Intelligent Vehicles).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  94. Published

    Constrained Path Optimization with Bézier Curve Primitives

    Choi, J-W. & Huhtala, K., 2014, 2014 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2014), September 14-18, 2014, Palmer House Hilton, Chicago, IL, USA. Institute of Electrical and Electronics Engineers IEEE, p. 246-251 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  95. Published

    A Potential Field and Bug Compound Navigation Algorithm for Nonholonomic Wheeled Robots

    Choi, J., 2011, Proceedings of the 5th GIM Scientific Workshop at Aalto University School of Electrical Engineering 29.-30.11.2011. Espoo: Aalto University, p. 62-70 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  96. Published

    A conceptual modeling and simulation framework for system Design

    Coatanea, E., Roca, R., Mokhtarian, H., Mokammel, F. & Ikkala, K., 1 Jul 2016, In : Computing in Science and Engineering. 18, 4, p. 42-52

    Research output: Contribution to journalArticleScientificpeer-review

  97. Published

    Dimensional analysis conceptual modeling supporting adaptable reasoning in simulation-based training

    Coatanea, E. & Roca, R., 7 Aug 2018, 2018 13th System of Systems Engineering Conference, SoSE 2018. IEEE, p. 245-252 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  98. Published

    Systematic search for design contradictions in systems' architecture: Toward a computer aided analysis

    Coatanéa, E., Nonsiri, S., Roca, R., Mokammel, F., Kruck, J. & Christophe, F., 6 Jun 2015, In : Journal of Integrated Design and Process Science. 19, 1, p. 25-46 22 p.

    Research output: Contribution to journalArticleScientificpeer-review

  99. Published

    Systematic Search and Ranking of Physical Contradictions Using Graph Theory Principles: Toward a Systematic Analysis of Design Strategies and their Impacts: TRIZ and Knowledge-Based Innovation in Science and Industry

    Coatanéa, E., Ryynänen, L., Calonius, O., Mokammel, F. & Riitahuhta, A., 2015, In : Procedia Engineering. 131, p. 1165-1182 18 p.

    Research output: Contribution to journalArticleScientificpeer-review

  100. Published

    Knowledge-based artificial neural network (KB-ANN) in engineering: Associating functional architecture modeling, dimensional analysis and causal graphs to produce optimized topologies for KB-ANNs

    Coatanéa, E., Wu, D., Tsarkov, V., Gary Wang, G., Modi, S. & Jafarian, H., 2018, 38th Computers and Information in Engineering Conference. The American Society of Mechanical Engineers ASME, Vol. 1B-2018. 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Previous 1 2 3 4 5 6 7 8 ...13 Next
Download list To download, please limit the number of search results to 1,000 or less.