Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. Published

    An approach to use PERA in enterprise modeling for industrial systems

    He, D., Lobov, A., Gonzalez Moctezuma, L. E. & Martinez Lastra, J. L., 2012, Proceedings of the 38th Annual Conference of the IEEE Industrial Electronics Society, IECON 2012, 25-28 October, 2012, Montreal, Quebec, Canada. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, p. 4196-4203 (Annual Conference of the IEEE Industrial Electronics Society).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  2. Published

    An application of B2MML in computer integrated manufacturing systems

    He, D., Lobov, A. & Martinez Lastra, J. L., 2012, Proceedings of the 16th International Conference on Mechatronics Technology, ICMT 2012, 16-19 October, 2012, Tianjin, China. Dante, J. D. G. (ed.). Tianjin: Tianjin University, p. 300-305 (International Conference on Mechatronics Technology).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  3. Published

    Experimental evaluation of a piston-type digital pump-motor-transformer with two independent outlets

    Heikkilä, M., Tammisto, J., Huova, M., Huhtala, K. & Linjama, M., 2010, Fluid Power and Motion Control (FPMC 2010), 15-17 September 2010, University of Bath, UK. Johnston, D. N. & Plummer, A. (eds.). p. 83-97

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  4. Published

    Hydraulic Energy Recovery in Displacement Controlled Digital Hydraulic System

    Heikkilä, M. & Linjama, M., 2013, Proceedings of the 13th Scandinavian International Conference on Fluid Power, 3-5 June, Linköping, Sweden. Scandinavian International Conference on Fluid Power, p. 1-7 7 p. (Scandinavian International Conference on Fluid Power).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  5. Published

    Development of intelligent gripper systems for microfactories

    Heikkilä, R., Prusi, T., Ha, T. H., Song, J. Y., Lee, C. W. & Tuokko, R., 2011, 7th International Workshop on Micromanufacturing Technology, IWMT 2011, 18 August, 2011, Jeju-do, Korea. Jeju-do: IWMT 2011, p. 26-28 (International Workshop on Micromanufacturing Technology IWMT).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  6. Published

    Mikro- ja Desktop-tuotantojärjestelmät

    Heikkilä, R., Vuola, A., Prusi, T., Siltala, N. & Tuokko, R., 2011, Automaatio XIX Seminaari, 15-16.3.2011, Helsinki. SAS julkaisusarja. Visala, A. (ed.). Helsinki: Suomen Automaatioseura, p. 1-6 6 p. (Automaatio Seminaari; vol. 41).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  7. Published

    Adaptive gripper system for small optical assemblies

    Heikkilä, R., Prusi, T., Ha, T. H., Song, J. Y., Lee, C. W. & Tuokko, R., 2010, Proceedings of the 7th International Workshop on Microfactories, IWMF 2010, 24-27 October, 2010, Daejeon, Korea. p. 308-312

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  8. Published

    Development of micro gripper systems for microfactories

    Heikkilä, R., Remes, M., Prusi, T. & Tuokko, R., 2008, Proceedings of the 4th International Workshop on Microfactory Technology, 10-11 July, 2008, Jeju-do, Korea. p. 4 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  9. Published

    New Power Management System for Fluid Power Applications

    Heikkilä, M., 2011, Proceedings of the 5th GIM Scientific Workshop at Aalto University School of Electrical Engineering 29.-30.11.2011. Espoo: Aalto University, p. 131-138 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  10. Published

    Comparison of proportional control and displacement control using digital hydraulic power management system

    Heikkilä, M., Karvonen, M., Linjama, M., Tikkanen, S. & Huhtala, K., 2014, ASME/BATH 2014 Symposium on Fluid Power and Motion Control, FPMC2014, September 10-12, 2014, Bath, United Kingdom. The American Society of Mechanical Engineers ASME, p. 1-8 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  11. Published

    Advances in the TUT microfactory concept development

    Heikkilä, R., Järvenpää, E. & Tuokko, R., 2010, In : International Journal of Automation Technology. 4, 2, p. 117-126

    Research output: Contribution to journalArticleScientificpeer-review

  12. Published

    Direct connection of digital hydraulic power management system and double acting cylinder - a simulation study

    Heikkilä, M. & Linjama, M., 2011, The Fourth Workshop on Digital Fluid Power, 21st-22nd November, 2011, Linz, Austria. Linz: DFP-Workshops, p. 59-74 (Workshop on Digital Fluid Power; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  13. Published

    Improving damping characteristics of displacement controlled digital hydraulic system

    Heikkilä, M. & Linjama, M., 2012, DFP 12, Proceedings of the fifth workshop on digital fluid power, October 24-25, 2012, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). Tampere: Tampere University of Technology. Department of Intellidgent Hydraulics and Automation, p. 75-88 (Workshop on digital fluid power).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  14. Published

    Experimental evaluation of a digital hydraulic power management system

    Heikkilä, M., Tammisto, J., Huova, M., Huhtala, K. & Linjama, M., 2010, Proceedings of the Third Workshop on Digital Fluid Power, October 13-14 2010, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). p. 129-142

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  15. Published

    Analysis of the new architecture proposal for the CMM control system

    Heikkilä, L., Saarinen, H., Aha, L., Viinikainen, M., Mattila, J., Hahto, A., Siuko, M. & Semeraro, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 2071-2074

    Research output: Contribution to journalArticleScientificpeer-review

  16. Published

    Displacement control of a mobile crane using a digital hydraulic power management system

    Heikkilä, M. & Linjama, M., 2013, In : Mechatronics. 23, 4, p. 452-461 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  17. Published

    Digital Hydraulic Power Management System - Measured Characteristics of a Second Prototype

    Heikkilä, M., Tammisto, J., Linjama, M. & Huhtala, K., May 2016, Proceedings of the Eighth Workshop on Digital Fluid Power (DFP16) . Uusi-Heikkilä, J. & Linjama, M. (eds.). p. 69-81 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  18. Published

    Fault-tolerant control of a multi-outlet digital hydraulic pump-motor

    Heikkilä, M. & Linjama, M., Mar 2018, Fluid power networks: Proceedings of the 11th International Fluid Power Conference, 19th-21st March 2018, Aachen. Murrenhoff, H. (ed.). Aachen University: RWTH Publications, Vol. 1. p. 145-157 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  19. Published

    Digital hydraulic multi-pressure actuators - simulation study of a forwarder crane

    Heikkilä, M., Huova, M. & Linjama, M., 28 Feb 2019, The 10th Workshop on Digital Fluid Power : February 28th - March 1st, 2019, Linz, Austria. Linz Center of Mechatronics, 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  20. Published

    Parhaat tuottavat - Valmistavan teknologiateollisuuden tutkimusagenda 2020

    Heilala, J. (ed.), Majuri, M. (ed.), Sääski, J. (ed.), Pesonen, J. (ed.), Halme, J. (ed.), Hyötyläinen, R. (ed.), Hentula, M. (ed.), Paro, J. (ed.) & Tuokko, R. (ed.), 2011, Helsinki: Tekes, VTT, TTY, Teknologiateollisuus ry.

    Research output: Book/ReportAnthologyScientificpeer-review

  21. Published

    Simulation as a Tool in Evaluating Combat Aircraft Shock Absorber Condition

    Heininen, A., Aaltonen, J., Koskinen, K. T. & Huitula, J., 2016, Proceedings of the 10th World Congress on Engineering Asset Management (Wceam 2015). Koskinen, KT., Kortelainen, H., Aaltonen, J., Uusitalo, T., Komonen, K., Mathew, J. & Laitinen, J. (eds.). Springer-Verlag, Berlin, p. 249-257 9 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  22. Published

    Simulating the Drag Coefficient of a Spherical Autonomous Underwater Vehicle

    Heininen, A., Aaltonen, J. & Koskinen, K. T., 9 Oct 2017, Proceedings of the 2nd Annual SMACC Research Seminar 2017. Aaltonen, J., Virkkunen, R., Koskinen, K. T. & Kuivanen, R. (eds.). Tampere: Tampere University of Technology, Vol. 2. p. 53-56 4 p. 14

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  23. Accepted/In press

    Gas-liquid ratio imbalance indicators of a fighter aircraft shock absorber

    Heininen, A., Aaltonen, J., Koskinen, K. & Huitula, J., 2019, (Accepted/In press) Proceedings of the 13th World Congress on Engineering Asset Management: WCEAM, 24-26 September 2018, Stavanger, Norway. Springer-Verlag, Berlin

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  24. Published

    Multi-criteria optimization and decision making for single family house

    Heinisuo, M., Tiainen, T., Mela, K. & Laasonen, M., 2012, ICCCBE 2012, 14th International Conference on Computing in Civil and Building Engineering, June 27-29, 2012, Moscow, Russia. Telichenko, V., Volkov, A. & Bilchuk, I. (eds.). Moscow State University of Civil Engineering. Publishing House "ASV", p. 1-8 8 p. (International Conference on Computing in Civil and Building Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  25. Published

    The role of microstructure in high stress abrasion of white cast irons

    Heino, V., Kallio, M., Valtonen, K. & Kuokkala, V-T., 2016, The 17th Nordic Symposium on Tribology - NORDTRIB 2016 14th - 17th June 2016 Aulanko, Hämeenlinna, Finland.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  26. Published

    Optimal design of stiffened plate using metamodeling techniques

    Heinonen, O. & Pajunen, S., 2011, In : Rakenteiden mekaniikka. 44, 3, p. 218-230

    Research output: Contribution to journalArticleScientificpeer-review

  27. Published

    Structured ZnO films: Effect of copper nitrate addition to precursor solution on topography, band gap energy and photocatalytic activity

    Heinonen, S., Nikkanen, J. P., Kaleva, A., Hyvärinen, L. & Levänen, E., 15 Feb 2017, In : IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING. 175, 1, 012042.

    Research output: Contribution to journalArticleScientificpeer-review

  28. Published

    Effect of oil viscosity on filter performance in lubrication oil system

    Heiskanen, V., Mäkelä, T., Kapanen, P. & Rinkinen, J., 2012, Proceedings of the 11th World Filtration Congress & Exhibition, WFC11, April 16-20, 2012, Graz, Austria. Vienna, Austria: Gesellschaft Österreichischer Chemiker GÖCH, p. 1-15 15 p. (World Filtration Congress).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  29. Published

    Virtual machine laboratory based on m1-technology

    Helminen, M., Palonen, T., Rokala, M., Ranta, P., Mäkelä, T. & Koskinen, K. T., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Tampere: Scandinavian International Conference on Fluid Power, p. 321-334 (Scandinavian International Conference on Fluid Power SICFP; vol. 12).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  30. Published

    A New Method and Format for Describing CANopen System Topology

    Helminen, M., Salonen, J., Saha, H., Nykänen, O., Koskinen, K. T., Ranta, P. & Pohjolainen, S., 2012, Proceedings of the 13th International CAN Conference, iCC 2012 in Hambach Castle, March 5 to March 6, Germany. CAN in Automation e.V., p. 1-8 8 p. (International CAN Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  31. Published

    Optimization and energy consumption of electro-hydraulic valve actuation system through valve event timing range

    Herranen, M., Huhtala, K. & Vilenius, M., 2010, Fluid Power and Motion Control (FPMC 2010), 15-17 September 2010, University of Bath, UK. Johnston, D. N. & Plummer, A. (eds.). p. 433-445

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  32. Published

    Electro hydraulic gas exchange valve actuation of 4-stroke large bore diesel engine

    Herranen, M. & Huhtala, K., 2014, 8th FPNI Ph.D Symposium on Fluid Power, FPNI2014, June 11-13, 2014, Lappeenranta, Finland. The American Society of Mechanical Engineers ASME, p. 1-11 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  33. Published

    Valve train with learning control features

    Herranen, M., Virvalo, T., Huhtala, K., Glader, T. & Kallio, I., 2010, 26th CIMAC World Congress on Combustion Engine Technology for Ship Propulsion Power Generation Rail Traction. June, 14-17, 2010, Bergen, Norway. p. 1-10 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  34. Published

    Fully variable valve actuation in large bore diesel engines

    Herranen, M., 3 Oct 2014, Tampere: Tampere University of Technology. 115 p. (Tampere University of Techology. Publication; vol. 1239)

    Research output: Book/ReportDoctoral thesisMonograph

  35. Published

    The energy balance of the electro-hydraulic linear actuation system

    Herranen, M., Huhtala, K. & Vilenius, M., 2010, In : Journal of Energy and Power Engineering. 4, 8, p. 57-63

    Research output: Contribution to journalArticleScientific

  36. Published

    Control arrangement of an electro-hydraulic gas exchange valve actuation system

    Herranen, M., Huhtala, K. & Virvalo, T., 2013, Patent No. Pat. EP 2 529 090 B1, Priority date 3 Jul 2013, Priority No. (30) FI 20105082

    Research output: PatentScientific

  37. Published

    Energy distribution and optimization of the valve controlled actuation system

    Herranen, M., 2011, Proceedings of the 5th GIM Scientific Workshop at Aalto University School of Electrical Engineering 29.-30.11.2011. Espoo: Aalto University, p. 111-124 14 p. (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  38. Published

    Engine gas exchange controlled by digital hydraulics

    Herranen, M., Siivonen, L. & Huhtala, K., 2011, Proceedings of the 2nd International Conference on Measurement and Control Engineering, ICMCE 2011, October 21-22, 2011, Puerto Rico, USA. New York, NY: ASME Press, p. 1-7 7 p. (International Conference on Measurement and Control Engineering ICMCE; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  39. Published

    Analysis of Adaptive/Learning Control Methods in Cyclic Hydraulic System

    Herranen, M., Enlund, J., Uusisalo, J. & Huhtala, K., 2012, Proceedings of the 8th International Fluid Power Conference, Dresden, March 26-28, 2012. Dresden: Technische Universität Dresden, Institute of Fluid Power, p. 399-410 (International Fluid Power Conference; vol. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  40. Published

    AMAD-painekytkimien laboratoriotestaus

    Hietala, J-P., 2009, Lentotekniikan rakennetutkimuksen neuvottelupäivät VII, 27.-28.8.2009, Tampere. Aaltonen, J. (ed.). p. 1-14 14 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  41. Published

    Aircraft hydraulic system model integration to fligh simulation model

    Hietala, J-P., Aaltonen, J., Koskinen, K. T. & Vilenius, M., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Tampere: Scandinavian International Conference on Fluid Power, p. 271-280 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  42. Published

    Novel Procedure for Supporting Maintenance of Mobile Work Machines Using R&D Simulators

    Hietala, J-P., Krogerus, T., Multanen, P., Hyvönen, M. & Huhtala, K., 2014, The Eleventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, CM2014 / MFPT2014, 10-12 June 2014, Manchester, UK. The British Institute of Non-Destructive Testing, p. 1-9 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  43. Published

    Comparison between an aircraft speed brake actuator high order linear model and a semi-empirical non-linear model in real time simulation

    Hietala, J-P., Aaltonen, J., Koskinen, K. T. & Vilenius, M., 2011, AST 2011, 3rd International Workshop on Aircraft System Technologies, March 31 - April 1, 2011, Hamburg, Germany. Hamburg: Hamburg University of Technology, p. 65-71 (International Workshop on Aircraft System Technologies AST; vol. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  44. Published

    Development of process for adaptive lifetime estimation of mechanical assemblies using accelerated testing methods

    Hietala, J-P., Ojala, P., Multanen, P., Miettinen, J. & Saarenrinne, P., 26 Oct 2016, Risk, Reliability and Safety: Innovating Theory and Practice : Proceedings of the 26th European Safety and Reliability Conference, ESREL 2016, Glasgow, Scotland, 25-29 September 2016. Walls, L., Revie, M. & Bedford, T. (eds.). CRC Press; Taylor & Francis, 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  45. Published

    Fatigue Lifetime Estimation of Machine Component Using Accelerated Testing

    Hietala, J-P., Ojala, P., Multanen, P., Miettinen, J. & Saarenrinne, P., 2017, ESREL 2017. CRC Press

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  46. Published

    Effect of start-up schemes and amplitude of tangential motion on friction behavior in fretting point contact

    Hintikka, J., Lehtovaara, A. & Lönnqvist, C., 2011, In : Tribology International. 44, 11, p. 1535-1543

    Research output: Contribution to journalArticleScientificpeer-review

  47. Published

    Fretting fatigue and friction of quenched and tempered steel in dry contact with aluminum bronze

    Hintikka, J., Lehtovaara, A. & Mäntylä, A., 2013, In : Wear. 308, 1-2, p. 155-165 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  48. Published

    Fretting fatigue of quenched and tempered steel in contact with bronze

    Hintikka, J., Lehtovaara, A. & Mäntylä, A., 2012, 15th Nordic Symposium on Tribology, NordTrib 2012, 12-15 June 2012, Trondheim, Norway. Trondheim: NTNU Norwegian University of Science and Technology, p. 1-6 6 p. (Nordic Symposium on Tribology).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  49. Published

    Evolvable micro production systems: specific needs and differences to macro

    Hofmann, A., Bretthauer, G., Siltala, N. & Tuokko, R., 2011, IEEE International Symposium on Assembly and Manufacturing, ISAM 2011, 25-27 May, 2011, Tampere Hall, Tampere, Finland. Piscataway, NJ: IEEE, p. 1-6 6 p. (IEEE International Symposium on Assembly and Manufacturing ISAM).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  50. Published

    Dynamic Fracture and Fragmentation of Heat Shocked Granites

    Hokka, M., Mardoukhi, A. & Kuokkala, V-T., 2017, 14th International conference of Fracture: Proceedings of ICF 14. Rhodes, Greece

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  51. Published

    Digital Image Correlation as a Measurement Tool for Heart Surgery

    Hokka, M., 2017, Proceedings of the Annual Meeting of the International Digital Image Correlation Society, Barcelona.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  52. Published

    Prediction of the Transient Effects in Glassy Polymers

    Holopainen, S., 2012, Proceedings of the 11th Finnish Mechanics Days. XI Suomen Mekaniikkapäivät, Oulun yliopisto 29.-30.11.2012. Hannu, K. & Mikko, M. (eds.). Oulu: Oulun yliopisto, p. 9-14 (Finnish Mechanics Days. Suomen Mekaniikkapäivät).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  53. Published

    Symmetrization of Tensors on General Spaces and Their Applications in Continuum Mechanics

    Holopainen, S., 2009, Proceedings of 7th EUROMECH Solid Mechanics Conference - Lectures and General Sessions. Ambrosio, J. A. C. & Silva, M. P. T. (eds.). APMTAC, p. 63-64 2 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  54. Published

    A model for scheduling of employees using supplier selection

    Holopainen, S., 2014, Engineering optimization IV, Proceedings of the International Conference on Engineering Optimiztion (ENGOPT 2014), Lisbon, Portugal, 8-11 September 2014. Rodrigues, H. C., Herskovits, J., Mota Soares, C. M., Guedes, J. M., Araújo, A. L., Folgado, J. O., Moleiro, F. & Madeira, J. F. A. (eds.). The Netherlands: CRC Press/Balkema, p. 533-538 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  55. Published

    Representations of m-linear functions on tensor spaces: Duals and transpositions with applications in continuum mechanics

    Holopainen, S., 2014, In : Mathematics and Mechanics of Solids. 19, 2, p. 168-192 25 p.

    Research output: Contribution to journalArticleScientificpeer-review

  56. Published

    Modeling of Long-Term Behavior of Glassy Polymers

    Holopainen, S. & Wallin, M., 2013, In : Journal of Engineering Materials and Technology: Transactions of the ASME. 135, 1, 11 p., 011001.

    Research output: Contribution to journalArticleScientificpeer-review

  57. Published

    Parameter sensitivity and thickness design of anisotropic elasto-plastic shell

    Holopainen, S., 2005, Proceedings 6th Congress on Structural and Multidisplinary Optimization, Rio de Janeiro, 30 May-3 June 2005, Brazil. Herskovits, J., Mazorche, S. & Canelas, A. (eds.). ISSMO, International society for structural and multidisciplinary optimization, 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  58. Published

    Modeling of the mechanical behavior of amorphous glassy polymers under variable loadings and comparison with state-of-the-art model predictions

    Holopainen, S., 2013, In : Mechanics of Materials. 66, p. 35-58 24 p.

    Research output: Contribution to journalArticleScientificpeer-review

  59. Published

    Influence of damage on inhomogeneous deformation behavior of amorphous glassy polymers. Modeling and algorithmic implementation in a finite element setting

    Holopainen, S., 2014, In : Engineering Fracture Mechanics. 114, p. 28-50 23 p.

    Research output: Contribution to journalArticleScientificpeer-review

  60. Published

    Prediction of long-term mechanical behavior of glassy polymers

    Holopainen, S. & Wallin, M., 2010, Proceedings of the 23rd Nordic Seminar on Computational Mechanics Stockholm, 21-22 October, 2010. Eriksson, A. & Tibert, G. (eds.). 752: KTH, p. 134-137 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  61. Published

    Computational modelling of high-cycle fatigue using a continuum based model

    Holopainen, S., Kouhia, R., Könnö, J. & Saksala, T., 2015, Proceedings of the NSCM28: 28th Nordic Seminar on Computational Mechanics, October 22 – 23, 2015, Tallinn, Estonia. p. 71-74 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  62. Published

    Transpositions and duals high-order tensors. On theory and applications in mechanics

    Holopainen, S., 4 Jun 2015, Proceedings of the XII Finnish Mechanics Days: Suomen XII mekaniikkapäivien esitelmät. Kouhia, R. (ed.). Rakenteiden Mekaniikan Seura ry, p. 188-193 6 p. (Journal of Structural Mechanics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  63. Published

    Evolution equations based approach for modeling of fatigue in amorphous glassy polymers. On the investigation of fatigue damage development in polycarbonate

    Holopainen, S., 2016, Proc. of VII European Congress on Computational Methods in Applied Sciences and Engineering , ECCOMAS Congress 2016. : M. Papadrakakis, V. Papadopoulos, G. Stefanou, V. Plevris (eds.) . Crete Island, Greece, 5 – 10 June 2016. Papadrakakis, M., Papadopoulos, V., Stefanou, G. & Plevris, V. (eds.). p. 6675-6687 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  64. Published

    Big data tulee – nykytila ja tulevaisuuden mahdollisuudet

    Holopainen, S. (Guest ed.) & Kuusi, O. (Guest ed.), Jun 2016, In : Futura. 2, 113 p.

    Research output: Contribution to journalSpecial issueScientificpeer-review

  65. Published

    Continuum approach for modelling transversely isotropic high-cycle fatigue

    Holopainen, S., Kouhia, R. & Saksala, T., 1 Nov 2016, In : EUROPEAN JOURNAL OF MECHANICS A: SOLIDS. 60, p. 183-195

    Research output: Contribution to journalArticleScientificpeer-review

  66. Published

    Computational modelling of transversely isotropic high-cycle fatigue using a continuum based model

    Holopainen, S., Kouhia, R., Könnö, J. & Saksala, T., 2016, 21st European Conference on Fracture, ECF21, 20-24 June 2016, Catania, Italy. p. 2718–2725 8 p. (Procedia Structural Integrity; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  67. Published

    Continuum approach for modeling fatigue in amorphous glassy polymers. Applications to the investigation of damage-ratcheting interaction in polycarbonate

    Holopainen, S., Barriere, T., Cheng, G. & Kouhia, R., Apr 2017, In : International Journal of Plasticity. 91, p. 109-133 24 p.

    Research output: Contribution to journalArticleScientificpeer-review

  68. Published

    Method for analysing planar machine tool measurements

    Hölsä, J., 1999, Tampere: Tampere University of Technology. (Tampereen teknillinen korkeakoulu. Julkaisuja; vol. 280)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  69. Published

    Mems Sensor Module for Hydraulic Boom State Feeedback Control

    Honkakorpi, J., Vihonen, J. & Mattila, J., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Sairala, H. & Koskinen, K. T. (eds.). Tampere: Scandinavian International Conference on Fluid Power, p. 393-404 (Scandinavian International Conference on Fluid Power SICFP).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  70. Published

    Application of mems sensor fusion in hydraulic boom control

    Honkakorpi, J. & Mattila, J., 2010, Proceedings of the Post-Graduate Workshop on Intelligent Machines and Transport Systems, May 3-7, 2010, CERN, Switzerland. Karvinen, T. & Keskinen, E. (eds.). p. 1-11 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  71. Published

    MEMS-based State Feedback Control of Multi-Body Hydraulic Manipulator

    Honkakorpi, J., Vihonen, J. & Mattila, J., 2013, 2013 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), November 3-7, 2013, Tokyo, Japan. Institute of Electrical and Electronics Engineers IEEE, p. 4419-4425 7 p. (IEEE/RSJ International Conference on Intelligent Robots and Systems).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  72. Published

    Sensor module for hydraulic boom state feedback control

    Honkakorpi, J., Vihonen, J. & Mattila, J., 2012, In : International Journal of Fluid Power. 13, 3, p. 15-23

    Research output: Contribution to journalArticleScientificpeer-review

  73. Published

    MEMS-based motion state estimation and control of hydraulic manipulators

    Honkakorpi, J., 27 Jun 2014, Tampere: Tampere University of Technology. 91 p. (Tampere University of Techology. Publication; vol. 1219)

    Research output: Book/ReportDoctoral thesisMonograph

  74. Published

    Mems sensor network based anti-sway control system for articulated hydraulic crane

    Honkakorpi, J., Vihonen, J. & Mattila, J., 2013, Proceedings of ASME/BATH 2013 Symposium on Fluid Power and Motion Control, FPMC2013, October 6-9, 2013, Sarasota, Florida. p. 1-9 9 p. (Symposium on Fluid Power and Motion Control).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  75. Published

    Lagrangian tracking of bubbles interacting with pin-fins in a microchannel

    Honkanen, M., Elcock, D., Kuo, C-J., Peles, Y. & Amitay, M., 2011, In : Experiments in Fluids. 50, 6, p. 1527-1538

    Research output: Contribution to journalArticleScientificpeer-review

  76. Published

    Comportamiento Dinámico en Tracción a Alta Temperatura De Titanio Ensayado Por Dos Métodos Distintos

    Hueto, F., Sancho, R., Hokka, M. & Galvez, F., 2017, Grupo Español de Fractura.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  77. Published

    Polttoainekulut kuriin

    Huhtala, K., 2013, In : Fluid Finland. 12, 2, p. 14-16 3 p.

    Research output: Contribution to journalArticleProfessional

  78. Published

    Pääkirjoitus: Tehokkuutta sitähän se kaikki on

    Huhtala, K., 2013, In : Fluid Finland. 12, 1, p. 5-5 1 p.

    Research output: Contribution to journalArticleProfessional

  79. Published

    Reitinvalintaa rastilta seuraavalle

    Huhtala, K., 2010, In : Fluid Finland. 3-4, p. 7-7

    Research output: Contribution to journalArticleScientific

  80. Published

    Koulutuksesta ja tutkimuksesta

    Huhtala, K., 2010, In : Fluid Finland. 9, 3-4, p. 6-6

    Research output: Contribution to journalArticleScientific

  81. Published

    Hydraulijärjestelmien suunnitteluperusteet

    Huhtala, K. & Rinkinen, J., 2014, Koneenosien suunnittelu. Björk, T., Hautala, P., Huhtala, K., Kivioja, S., Kleimola, M., Lavi, M., Martikka, H., Miettinen, J., Ranta, A., Rinkinen, J. & Salonen, P. (eds.). Helsinki: Sanoma Pro Oy, p. 436-463 28 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  82. Published

    Research platforms for future activities

    Huhtala, K., 2010, Proceedings of the 3rd GIM Scientific Workshop, February 17-18, 2010, Aalto University School of Science and Technology. Halme, A. & Pirttioja, T. (eds.). p. 1-16 16 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  83. Published

    IHA Department of Intelligent Hydraulics and Automation

    Huhtala, K. & Aunola, V., 2011, In : Fluid Finland. 10, 1, p. 10-11

    Research output: Contribution to journalArticleProfessional

  84. Control architecture of GIM machine

    Huhtala, K., Uusisalo, J., Vuohijoki, A. & Ahopelto, M., 2011, GIM - Generic Intelligent Machines, 1st GIM Scientific Workshop at Helsinki University of Technology, 14.-15.8.2008. Espoo: Helsinki University of Technology, p. 71-79

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  85. Published

    New energy efficient solutions to mobile machines

    Huhtala, K., Ahopelto, M., Heikkilä, M., Backas, J., Tammisto, J., Huova, M. & Linjama, M., 2013, The 8th International Conference on Fluid Power Transmission and Control, ICFP 2013, April 9-11, 2013, Zhejiang University, Hangzhou, China. Yongxiang, L., Qingfeng, W., Bingfeng, J. & Jun, Z. (eds.). p. 38-52 15 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  86. Published

    An approach to model relations between product variety and manufacturing process variety

    Huhtala, P., Pulkkinen, A. & Leskinen, A., 2010, NordDesign 2010 Conference, 25-27 August, 2010, Göteborg, Sweden. Dagman, A. & Söderberg, R. (eds.). p. 129-138

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  87. A refining surface for a refiner for defibering material containing lignocellulose

    Huhtanen, J-P. & Karvinen, R., 2011, Patent No. Pat. CA 2490717, Priority No. (30) 2002/07/02(30) FI20021310

    Research output: PatentScientific

  88. Published

    Energy reduction in chip refining by optimization of operating parameters and segment design

    Huhtanen, J-P., Ruola, V. & Vuorio, P., 2010, 7th International Seminar on Fundamental Mechanical Pulp Research (IFMPRS 2010), June 21-23, 2010, Nanjing, China. p. 125-129

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  89. Published

    Simulations with fault-tolerant controller software of a digital valve

    Huova, M., Ketonen, M., Alexeev, P., Boström, P., Linjama, M., Walden, M. & Sere, K., 2012, Proceedings of the fifth workshop on digital fluid power, October 24-25, 2012, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). Tampere: Tampere University of Technology. Department of Intelligent Hydraulics and Automation, p. 223-242 (Digital fluid power).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  90. Published

    Energy efficient control of multiactuator digital hydraulic mobile machine

    Huova, M., Karvonen, M., Ahola, V., Linjama, M. & Vilenius, M., 2010, 7th International Fluid Power Conference (7th IFK), 22-24 March 2010, Aachen, Germany. p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  91. Published

    Energy Efficiency of Digital Hydraulic Valve Control Systems

    Huova, M., Linjama, M. & Huhtala, K., 2013, SAE 2013 Commercial Vehicle Engineering Congress (COMVEC), October 1-3, 2013, Rosemont, Illinois, USA. 13 p. (SAE Technical Papers).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  92. Published

    Energy efficient digital hydraulic valve control

    Huova, M., 2011, GIM - Generic Intelligent Machines, The 4th GIM Scientific Workshop, January 18-19, 2011, Tampere University of Technology, Tampere, Finland. Tampere: Tampere University of Technology, p. 1-6 6 p. (GIM Scientific Workshop; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  93. Published

    Recent results in energy efficient digital hydraulic valve control

    Huova, M., 2012, Proceedings of the 6th GIM Scientific Workshop, November 7-8, 2012, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). Tampere: Tampere University of Technology. Department of Intelligent Hydraulics and Automation, p. 89-94 (GIM Scientific Workshop; vol. 6).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  94. Published

    Energy efficient digital hydraulic valve control utilizing pressurized tank line

    Huova, M. & Linjama, M., 2012, Proceedings of the 8th International Fluid Power Conference Dresden, March 26-28, 2012. Dresden: Technische Universutät Dresden, Dresdner Verein zur Förderung der Fluidtechnik, p. 111-122 12 p. (International Fluid Power Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  95. Published

    Improving resolution of digital hydraulic valve system by utilizing fast switching valves

    Huova, M. & Plöckinger, A., 2010, Proceedings of the Third Workshop on Digital Fluid Power, October 13-14 2010, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). p. 79-92

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  96. Published

    Energy efficiency of three-chamber cylinder with digital valve system

    Huova, M., Laamanen, A. & Linjama, M., 2010, In : International Journal of Fluid Power. 11, 3, p. 15-22

    Research output: Contribution to journalArticleScientificpeer-review

  97. Published

    Study of Energy Losses in Digital Hydraulic Multi-Pressure Actuator

    Huova, M., Aalto, A., Linjama, M. & Huhtala, K., 8 Jun 2017, The 15th Scandinavian International Conference on Fluid Power, SICFP’17, June 7-9, 2017, Linköping, Sweden. Linköping University Electronic Press, p. 214-223 (Linköping Electronic Conference Proceedings).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  98. Published

    Experimental and numerical study of a choke valve in a turbulent flow

    Huovinen, M., Kolehmainen, J., Koponen, P., Nissilä, T. & Saarenrinne, P., 2015, In : Flow Measurement and Instrumentation. 45, p. 151-161 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  99. Published

    An application of Cloud Robotics for enhancing the Flexibility of Robotic Cells at Factory Shop Floors

    Hussnain, A., Ferrer, B. R. & Lastra, J. L. M., Oct 2018, IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society. IEEE, p. 2963-2970 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  100. Published

    Systeemiteoreettiset mallit liiketoiminnan kehittämisen tukena

    Huttunen, P. & Laurikkala, H., 2011, Automaatio XIX Seminaari, 15-16.3.2011, Helsinki. SAS julkaisusarja. Visala, A. (ed.). Helsinki: Suomen Automaatioseura, p. 1-6 6 p. (Automaatio Seminaari; vol. 41).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

Previous 1 2 3 4 5 6 7 8 ...13 Next
Download list To download, please limit the number of search results to 1,000 or less.