Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. Published

    Towards dependable automation

    Seppälä, J. & Salmenperä, M., 2015, Cyber Security: Analytics, Technology and Automation: Part IV. Springer International Publishing, p. 229-249 21 p. (Intelligent Systems, Control and Automation: Science and Engineering; vol. 78).

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  2. Published

    Hyperspectral phase imaging based on denoising in complex-valued eigensubspace

    Shevkunov, I., Katkovnik, V., Claus, D., Pedrini, G., Petrov, N. V. & Egiazarian, K., 1 Apr 2020, In : Optics and Lasers in Engineering. 127, 10 p., 105973.

    Research output: Contribution to journalArticleScientificpeer-review

  3. Published

    Introducing Multi-Convexity in Path Constrained Trajectory Optimization for Mobile Manipulators

    Singh, A. K., Ahonen, A., Ghabcheloo, R. & Mueller, A., 2020, European Control Conference 2020, ECC 2020. IEEE, p. 1178-1185 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  4. Published

    Experimental and numerical study of wall layer development in a tribocharged fluidized bed

    Sippola, P., Kolehmainen, J., Ozel, A., Liu, X., Saarenrinne, P. & Sundaresan, S., 25 Aug 2018, In : Journal of Fluid Mechanics. 849, p. 860-884 25 p.

    Research output: Contribution to journalArticleScientificpeer-review

  5. Published

    Digital image correlation study of the deformation and functioning of the human heart during open-heart surgery

    Soltani, A., Curtze, S., Lahti, J., Järvelä, K., Laurikka, J., Hokka, M. & Kuokkala, V. T., 2018, Mechanics of Biological Systems, Materials and other topics in Experimental and Applied Mechanics - Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics. Springer New York LLC, Vol. 4. p. 19-27 9 p. (Conference Proceedings of the Society for Experimental Mechanics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  6. Published

    Dynamic speckle analysis with smoothed intensity-based activity maps

    Stoykova, E., Berberova, N., Kim, Y., Nazarova, D., Ivanov, B., Gotchev, A., Hong, J. & Kang, H., 1 Jun 2017, In : Optics and Lasers in Engineering. 93, p. 55-65 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  7. Published

    Highly conducting polychloroprene composites based on multi-walled carbon nanotubes and 1-butyl 3-methyl imidazolium bis(trifluoromethylsulphonyl)imide

    Subramaniam, K., Das, A. & Heinrich, G., Jul 2012, In : KGK: KAUTSCHUK GUMMI KUNSTSTOFFE. 65, 7-8, p. 44-46 3 p.

    Research output: Contribution to journalArticleScientificpeer-review

  8. Published

    Recurrence network analysis of wide band oscillations of local field potentials from the primary motor cortex reveals rich dynamics.

    Subramaniyam, N. P., Hyttinen, J., Hatsopoulos, N. G. & Takahashi, K., 1 Jul 2015, International IEEE/EMBS Conference on Neural Engineering, NER. IEEE COMPUTER SOCIETY PRESS, p. 960-963 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  9. Published

    Effect of air gap on the adhesion of PET layer on cardboard substrate in extrusion coating

    Suokas, E., 1 Jan 2017, 16th TAPPI European PLACE Conference 2017. TAPPI Press, p. 529-544 16 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  10. Published

    Effect of polyolefin molecular structure on product properties in extrusion coating

    Suokas, E., 2019, 17th Biennial TAPPI European PLACE Conference 2019. TAPPI Press, p. 89-98 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  11. Published

    Solvothermal synthesis derived Co-Ga codoped ZnO diluted magnetic degenerated semiconductor nanocrystals

    Šutka, A., Käämbre, T., Joost, U., Kooser, K., Kook, M., Duarte, R. F., Kisand, V., Maiorov, M., Döbelin, N. & Smits, K., 30 Sep 2018, In : Journal of Alloys and Compounds. 763, p. 164-172 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  12. Published

    Analysing traffic fluency from bus data

    Syrjärinne, P., Nummenmaa, J., Thanisch, P., Kerminen, R. & Hakulinen, E., 1 Aug 2015, In : IET Intelligent Transport Systems. 9, 6, p. 566-572 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  13. Published

    Fluorine losses in Er3+oxyfluoride phosphate glasses and glass-ceramics

    Szczodra, A., Mardoukhi, A., Hokka, M., Boetti, N. G. & Petit, L., 15 Aug 2019, In : Journal of Alloys and Compounds. 797, p. 797-803 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  14. Published

    Optimizing ammonium adsorption on natural zeolite for wastewaters with high loads of ammonium and solids

    Taddeo, R., Prajapati, S. & Lepistö, R., 2017, In : Journal of Porous Materials. 24, 6, p. 1545–1554 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  15. Published

    On the threshold based neuronal spike detection, and an objective criterion for setting the threshold

    Tanskanen, J. M. A., Kapucu, F. E. & Hyttinen, J. A. K., 1 Jul 2015, International IEEE/EMBS Conference on Neural Engineering, NER. IEEE COMPUTER SOCIETY PRESS, p. 1016-1019 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  16. Published

    Superhydrophobic Coatings on Cellulose-Based Materials: Fabrication, Properties, and Applications

    Teisala, H., Tuominen, M. & Kuusipalo, J., 1 Feb 2014, In : Advanced Materials Interfaces. 1, 1, p. 1-20 20 p., 1300026.

    Research output: Contribution to journalReview ArticleScientificpeer-review

  17. Published

    Nanoparticle deposition on packaging materials by the liquid flame spray

    Teisala, H., Tuominen, M., Aromaa, M., Mäkelä, J. M., Stepien, M., Saarinen, J. J., Toivakka, M. & Kuusipalo, J., 2011, 13th European PLACE Conference 2011. Vol. 1. 2 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  18. Published

    Ultrafast Processing of Hierarchical Nanotexture for a Transparent Superamphiphobic Coating with Extremely Low Roll-Off Angle and High Impalement Pressure

    Teisala, H., Geyer, F., Haapanen, J., Juuti, P., Mäkelä, J. M., Vollmer, D. & Butt, H. J., 2018, In : Advanced Materials. 30, 14, 1706529.

    Research output: Contribution to journalArticleScientificpeer-review

  19. Published

    Real-time and Robust Collaborative Robot Motion Control with Microsoft Kinect ® v2

    Teke, B., Lanz, M., Kämäräinen, J-K. & Hietanen, A., 27 Aug 2018, 2018 14th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications, MESA 2018. IEEE, 6 p. 8449156

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  20. Published

    Elevated and cryogenic temperature micropillar compression of magnesium–niobium multilayer films

    Thomas, K., Mohanty, G., Wehrs, J., Taylor, A. A., Pathak, S., Casari, D., Schwiedrzik, J., Mara, N., Spolenak, R. & Michler, J., 15 Aug 2019, In : Journal of Materials Science. 54, 15, p. 10884-10901 18 p.

    Research output: Contribution to journalArticleScientificpeer-review

  21. Published

    Optimised selection of new protective coatings for biofuel boiler applications

    Tuurna, S., Varis, T., Penttilä, K., Ruusuvuori, K., Holmström, S. & Yli-Olli, S., Jul 2011, In : Materials and Corrosion-Werkstoffe und Korrosion. 62, 7, p. 642-649 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  22. Published

    High performance natural rubber composites with a hierarchical reinforcement structure of carbon nanotube modified natural fibers

    Tzounis, L., Debnath, S., Rooj, S., Fischer, D., Mäder, E., Das, A., Stamm, M. & Heinrich, G., 2014, In : Materials and Design. 58, p. 1-11 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  23. Published

    Effect of pre-treatments on barrier properties of layers applied by atomic layer deposition onto polymer-coated substrates

    Vähä-Nissi, M., Hirvikorpi, T., Sievänen, J., Salo, E., Harlin, A., Johansson, P. & Kuusipalo, J., 2011, 13th European PLACE Conference 2011. Vol. 1. p. 447 1 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  24. Published

    Conjugated Heat Transfer Simulation of a Fin-and-Tube Heat Exchanger

    Välikangas, T. & Karvinen, R., 2018, In : Heat Transfer Engineering. 39, 13-14, p. 1192-1200 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  25. Published

    Fin-and-tube heat exchanger enhancement with a combined herringbone and vortex generator design

    Välikangas, T., Singh, S., Sørensen, K. & Condra, T., 2018, In : International Journal of Heat and Mass Transfer. 118, p. 602-616 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  26. E-pub ahead of print

    Deposition of dry particles on a fin-and-tube heat exchanger by a coupled soft-sphere DEM and CFD

    Välikangas, T., Hærvig, J., Kuuluvainen, H., Dal Maso, M., Peltonen, P. & Vuorinen, V., 2019, In : International Journal of Heat and Mass Transfer. 19 p., 119046.

    Research output: Contribution to journalArticleScientificpeer-review

  27. Published

    Impact wear and mechanical behavior of steels at subzero temperatures

    Valtonen, K., Ratia, V., Ramakrishnan, K. R., Apostol, M., Terva, J. & Kuokkala, V-T., 2019, In : Tribology International. 129, p. 476-493 18 p.

    Research output: Contribution to journalArticleScientificpeer-review

  28. Published

    Effects of adiabatic heating estimated from tensile tests with continuous heating

    Vazquez Fernandez, N., Isakov, M., Hokka, M. & Kuokkala, V. T., 2018, Dynamic Behavior of Materials - Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics. Springer New York LLC, Vol. 1. p. 1-7 7 p. (Conference Proceedings of the Society for Experimental Mechanics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  29. E-pub ahead of print

    Low temperature afterglow from SrAl2O4: Eu, Dy, B containing glass

    Vitola, V., Lahti, V., Bite, I., Spustaka, A., Millers, D., Lastusaari, M., Petit, L. & Smits, K., 2020, In : Scripta Materialia. 190, p. 86-90 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  30. Published

    Erosive-abrasive wear behavior of carbide-free bainitic and boron steels compared in simulated field conditions

    Vuorinen, E., Heino, V., Ojala, N., Haiko, O. & Hedayati, A., 2018, In : Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 232, 1, p. 3-13 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  31. Published

    Bioactive glass ions induce efficient osteogenic differentiation of human adipose stem cells encapsulated in gellan gum and collagen type I hydrogels

    Vuornos, K., Ojansivu, M., Koivisto, J. T., Häkkänen, H., Belay, B., Montonen, T., Huhtala, H., Kääriäinen, M., Hupa, L., Kellomäki, M., Hyttinen, J., Ihalainen, J. A. & Miettinen, S., 1 Jun 2019, In : Materials Science and Engineering C. 99, p. 905-918 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  32. Published

    Do properties of bioactive glasses exhibit mixed alkali behavior?

    Wang, X., Fagerlund, S., Massera, J., Södergård, B. & Hupa, L., 2017, In : Journal of Materials Science. 52, 15, p. 8986–8997 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  33. Published

    Co-electrospun blends of PU and PEG as potential biocompatible scaffolds for small-diameter vascular tissue engineering

    Wang, H., Feng, Y., Fang, Z., Yuan, W. & Khan, M., 1 Dec 2012, In : Materials Science and Engineering C: Materials for Biological Applications. 32, 8, p. 2306-2315 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  34. Published

    An Artificial Nocturnal Flower via Humidity-Gated Photoactuation in Liquid Crystal Networks

    Wani, O. M., Verpaalen, R., Zeng, H., Priimagi, A. & Schenning, A. P. H. J., Jan 2019, In : Advanced Materials. 31, 2, 1805985.

    Research output: Contribution to journalArticleScientificpeer-review

  35. Published

    Operating point dependent variable switching point predictive current control for PMSM drives

    Wendel, S., Karamanakos, P., Dietz, A. & Kennel, R., 1 May 2019, PRECEDE 2019: 2019 IEEE International Symposium on Predictive Control of Electrical Drives and Power Electronics. IEEE, p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  36. Published

    Transfer printing of metallic microstructures on adhesion-promoting hydrogel substrates

    Wu, H., Sariola, V., Zhu, C., Zhao, J., Sitti, M. & Bettinger, C. J., 1 Jun 2015, In : Advanced Materials. 27, 22, p. 3398-3404 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  37. Published

    Dimension reduction and decomposition using causal graph and qualitative analysis for aircraft concept design optimization

    Wu, D., Coatanea, E. & Wang, G. G., 2017, 43rd Design Automation Conference. The American Society of Mechanical Engineers ASME

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  38. Published

    Employing Knowledge on Causal Relationship to Assist Multidisciplinary Design Optimization

    Wu, D., Coatanea, E. & Wang, G. G., Apr 2019, In : Journal of Mechanical Design, Transactions of the ASME. 141, 4, 041402.

    Research output: Contribution to journalArticleScientificpeer-review

  39. Published

    Biomimetic hemo-compatible surfaces of polyurethane by grafting copolymer brushes of poly(ethylene glycol) and poly(phosphorylcholine methacrylate)

    Yang, D., Feng, Y., Behl, M., Lendlein, A., Zhao, H., Khan, M. & Guo, J., 2012, Multifunctional Polymer-Based Materials. Vol. 1403. p. 171-176 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  40. Published

    Shedding frequency in cavitation erosion evolution tracking

    Ylönen, M., Franc, J. P., Miettinen, J., Saarenrinne, P. & Fivel, M., 1 Sep 2019, In : International Journal of Multiphase Flow. 118, p. 141-149 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  41. Published

    Light Robots: Bridging the Gap between Microrobotics and Photomechanics in Soft Materials

    Zeng, H., Wasylczyk, P., Wiersma, D. S. & Priimagi, A., 2018, In : Advanced Materials. 30, 24, 1703554.

    Research output: Contribution to journalArticleScientificpeer-review

  42. Published

    Viewpoint: Pavlovian Materials—Functional Biomimetics Inspired by Classical Conditioning

    Zhang, H., Zeng, H., Priimägi, A. & Ikkala, O., 2020, In : Advanced Materials. 9 p., 1906619.

    Research output: Contribution to journalArticleScientificpeer-review

Previous 1 2 3 Next