Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. Published

    Modelling of fretting fatigue cracking risk in shrink fit with wavy surfaces

    Immonen, J., Lehtovaara, A. & Lönnqvist, C., 2010, 14th Nordic Symposium on Tribology, Nordtrib 2010, Storforsen, Sweden, Luleå University of Technology. p. 1-8 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  2. Published

    Energy saving in working hydraulics of long booms in heavy working vehicles

    Immonen, P., Ponomarev, P., Åman, R., Ahola, V., Uusi-Heikkilä, J., Laurila, L., Handroos, H., Niemelä, M., Pyrhönen, J. & Huhtala, K., 1 May 2016, In : Automation in Construction. 65, p. 125-132 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  3. Published

    Problematics of friction in a high-speed rubber-wheel wear test system: A case study of irregularly rough steel in water lubricated contact

    Ismailov, A., Järveläinen, M. & Levänen, E., 15 Aug 2018, In : Wear. 408-409, p. 65-71

    Research output: Contribution to journalArticleScientificpeer-review

  4. Published

    Simulation and advanced control of transient behaviour in gyratory cone crushers

    Itävuo, P., Jaatinen, A. & Vilkko, M., 2011, 8th International Mineral Processing Seminar, Santiago, Chile, 30.11-2.12.2011. Kracht, W., Kuyvenhoven, R., Lynch-Watson, S. & Montes-Atenas, G. (eds.). Santiago: Gecamin, p. 63-72 (International Mineral Processing Seminar).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  5. Published

    Feed-hopper level estimation and control in cone crushers

    Itävuo, P., Hulthén, E. & Vilkko, M., 15 Aug 2017, In : Minerals Engineering. 110, p. 82-95 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  6. Published

    Mass balance control of crushing circuits

    Itävuo, P., Hulthén, E., Yahyaei, M. & Vilkko, M., May 2019, In : Minerals Engineering. 135, p. 37-47 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  7. Published

    Additive Manufacturing in Production: A Study Case Applying Technical Requirements: 15th Nordic Laser Materials Processing Conference, Nolamp 15

    Ituarte, I. F., Coatanea, E., Salmi, M., Tuomi, J. & Partanen, J., 2015, In : Physics Procedia. 78, p. 357-366 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  8. Published

    Enhancement of security in the hierarchy model of control and automation by applying single sign-on approach for web services

    Jafary, P., Lobov, A. & Martinez Lastra, J. L., 2012, Proceedings of 10th International Conference on ICT and Knowledge Engineering, 21-23 November, 2012, Siam University, Bangkok, Thailand. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, p. 252-259 (International Conference on ICT and Knowledge Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  9. Published

    On vibroacoustic analysis of grinding contact vibrations

    Järvenpää, V-M., Yuan, L. & Kalbasi Shirvani, H., 2014, Proceedings of the 21st International Congress on Sound and Vibration, In Depth Sound and Vibration Research, 2014 ICSV21, 13-17 July, 2014, Beijing. Crocker, M. J., Pawelczyk, M. & Tian, J. (eds.). International Institute of Acoustics and Vibration (IIAV), p. 2431-2436 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  10. Published

    Suomalaisten konepajojen tuotannonsuunnittelu on ERP:n ja Excel-taulukoiden varassa

    Järvenpää, E. & Lanz, M., 2014, In : Stoori. 4, p. 19-24 6 p.

    Research output: Contribution to journalArticleProfessional

  11. Published

    Host activities in connection with the DTP2 test facility

    Järvenpää, J., Timperi, A., Tuominen, R. & Mattila, J., 2008, Espoo: VTT. 5 p. (VTT Publications; vol. 678)

    Research output: Book/ReportCommissioned reportProfessional

  12. Published

    Activities and corresponding information flows for production system adaption planning

    Järvenpää, E., Lanz, M., Siltala, N. & Tuokko, R., 2011, Proceedings of the 4th International Swedish Production Symposium, SPS11 3-5 May, 2011, Lund, Sweden. Ståhl, J-E. (ed.). Lund: The Swedish Production Academy, p. 124-133 (International Swedish Production Symposium SPS).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  13. Published

    TUT-Microfactory – A small-size, modular and sustainable production system

    Järvenpää, E., Heikkilä, R. & Tuokko, R., 2013, Proceedings of 11th Global Conference on Sustainable Manufacturing GCSM - Innovative Solutions, Berlin, Germany, 23rd-25th September, 2013. Seliger, G. (ed.). Berlin: Technische Universität Berlin, p. 79-84 6 p. (Global Conference on Sustainable Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  14. Published

    Requirements for Manufacturing Operations Management and Control Systems in a Dynamic Environment

    Järvenpää, E., Tokola, H., Salonen, T., Lanz, M., Koho, M. & Tuokko, R., 2014, Proceedings of the 24th International Conference on Flexible Automation and Intelligent Manufacturing, FAIM2014, 20th -23rd May, San Antonio, Texas, USA. Chen, F. F. (ed.). Lancaster, Pennsylvia: DEStech Publications, p. 1135-1142 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  15. Published

    Capability-Based Approach for Evaluating the Impact of Product Requirement Changes on the Production System

    Järvenpää, E. & Torvinen, S., 2013, 23rd International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 13, The challenge of sustaining global competitive manufacturing system, 26-28 June 2013 Porto Portugal, Advances in Sustainable and Competitive Manufacturing Systems. Azevedo, A. (ed.). Switzerland: Springer International Publishing, p. 173-185 13 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  16. Published

    Capability-based ontological resource model and rules for describing and assigning resources in sheet metal manufacturing

    Järvenpää, E., Lohtander, M. & Tuokko, R., 2013, 2013 IEEE International Symposium of Assembly and Manufacturing (ISAM), July 30th – Aug 2nd 2013, Xi’an, China. Piscataway: Institute of Electrical and Electronics Engineers IEEE, p. 105-108 3 p. (International Symposium on Assembly and Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  17. Published

    Dynamic operation environment - towards intelligent adaptive production systems

    Järvenpää, E., Luostarinen, P., Lanz, M., Garcia, F. & Tuokko, R., 2011, IEEE International Symposium on Assembly and Manufacturing, ISAM 2011, 25-27 May, 2011, Tampere Hall, Tampere, Finland. Piscataway, NJ: IEEE, p. 1-6 6 p. (IEEE International Symposium on Assembly and Manufacturing ISAM).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  18. Published

    Presenting capabilities of resources and resource combinations to support production system adaptation

    Järvenpää, E., Luostarinen, P., Lanz, M. & Tuokko, R., 2011, IEEE International Symposium on Assembly and Manufacturing, ISAM 2011, 25-27 May, 2011, Tampere Hall, Tampere, Finland. Piscataway, NJ: IEEE, p. 1-6 6 p. (IEEE International Symposium on Assembly and Manufacturing ISAM).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  19. Published

    Modeling of Tangential Vibrations in Cylindrical Grinding Contact with Regenerative Chatter

    Järvenpää, V-M., Yuan, L., Kalbasi Shirvani, H. & Mehmood, F., 2013, Surveillance 7 - International conference, Institute of Technology of Chartres, France, October 29-30, 2013. 10 p. (International Conference Surveillance).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  20. Published

    Towards automatic reconfiguration planning of changeable assembly systems

    Järvenpää, E. & Tuokko, R., 2010, Proceeding of Post-Graduate Workshop on Intelligent Machines and Transport Systems, 3-7 May 2010, CERN, Switzerland. p. 79-89

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  21. Published

    Factory level logistics and control aspects for flexible and reactive microfactory concept

    Järvenpää, E., Heikkilä, R. & Tuokko, R., 2010, Frontiers of Assembly and Manufacturing - Selected papers from ISAM 2009. Lee, S., Suarez, R. & Choi, B-W. (eds.). Springer-Verlag Berlin Heidelberg, p. 127-140

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  22. Published

    Capability-Based Adaptation of Production Systems - Practical Case Study in TUT-Microfactory Environment

    Järvenpää, E., Lanz, M. & Tuokko, R., 2013, 5th International conference on advanced design and manufacture, 25-28 September 2013, Valencia, Spain. Su, D. & Zhu, S. (eds.). Trans Tech Publications, p. 245-248 4 p. (Key Engineering Materials; vol. 572).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  23. Published

    Studying the information sources and flows in a company - Support for the development of new intelligent systems

    Järvenpää, E., Lanz, M., Mela, J. & Tuokko, R., 2010, Proceedings of the 20th International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2010, July 12-14, 2010, California State University East Bay, USA. p. 387-394

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  24. Published

    Development of a rule-base for matching product requirements against resource capabilities in an adaptive production system

    Järvenpää, E., Luostarinen, P., Lanz, M. & Tuokko, R., 2012, The 22nd International Conference on Flexible Automation and Intelligent Manufacturing , FAIM 2012, 10-13 June, 2012, Helsinki, Finland. Hasse, N., Satu, K., Ville, T. & Seppo, T. (eds.). Tampere: Tampere University of Technology. Department of Production Engineering, p. 449-456 (International Conference on Flexible Automation and Intelligent Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  25. Published

    Delay excited vibrations in grinding wheel rotor system

    Järvenpää, V-M. & Yuan, L., 2014, Proceedings of the 21st International Congress on Sound and Vibration, In Depth Sound and Vibration Research 2014, ICSV21, 13-17 July, 2014, Beijing, China. Crocker, M. J., Pawelczyk, M. & Tian, J. (eds.). International Institute of Acoustics and Vibration (IIAV), p. 2437-2444 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  26. Published

    Capability-based adaptation of production systems in a changing environment

    Järvenpää, E., 2012, Tampere: Tampere University of Technology. 168 p. (Tampere University of Technology. Publication; vol. 1082)

    Research output: Book/ReportDoctoral thesisMonograph

  27. Published

    Adaptation of manufacturing systems in dynamic environment based on capability description method

    Järvenpää, E., Luostarinen, P., Lanz, M. & Tuokko, R., 2012, Manufacturing systems. Faieza, A. A. (ed.). Rijeka, Croatia: InTech, p. 93-118

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  28. Published

    Microfactory concept for highly flexible volume assembly of watch mechanisms

    Järvenpää, E., Heikkilä, R. & Tuokko, R., 2010, Proceedings of the 7th International Workshop on Microfactories, IWMF 2010, 24-27 October, 2010, Daejeon, Korea. p. 9-14

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  29. Published

    Micro-factories

    Järvenpää, E., Heikkilä, R., Siltala, N., Prusi, T. & Tuokko, R., 2015, Micromanufacturing Engineering and Technology. 2 ed. Elsevier, p. 549-579

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  30. Published

    Production planning and control in Finnish manufacturing companies – Current state and challenges

    Järvenpää, E., Lanz, M., Tokola, H., Salonen, T. & Koho, M., 2015, Proceedings of the 25th International Conference on Flexible Automation and Intelligent Manufacturing. 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  31. Published

    Guidelines for Designing Human-friendly User Interfaces for Factory Floor Manufacturing Operators

    Järvenpää, E. & Lanz, M., 2015, Advances in Production Management Systems: Innovative Production Management Towards Sustainable Growth: IFIP WG 5.7 International Conference, APMS 2015, Tokyo, Japan, September 7-9, 2015, Proceedings, Part II. Springer International Publishing, p. 531-538 8 p. (IFIP Advances in Information and Communication Technology).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  32. Published

    Application of a Capability-based Adaptation Methodology to a Small-size Production System

    Järvenpää, E., Lanz, M. & Tuokko, R., 2016, In : International Journal of Manufacturing Technology and Management. 30, 1/2, p. 67-86 20 p.

    Research output: Contribution to journalArticleScientificpeer-review

  33. Published

    Formal Resource and Capability Descriptions Supporting Rapid Reconfiguration of Assembly Systems

    Järvenpää, E., Siltala, N. & Lanz, M., Aug 2016, Proceedings of the 12th Conference on Automation Science and Engineering, and International Symposium on Assembly and Manufacturing. IEEE, p. 120-125 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  34. Published

    Agility Challenges in Finnish Manufacturing Companies – Manufacturing Operations Management Viewpoint

    Järvenpää, E., Lanz, M. & Lammervo, E., Sep 2016, Advances in Production Management Systems: Initiatives for a Sustainable World - IFIP WG 5.7 International Conference, APMS 2016, Revised Selected Papers. Springer, p. 130-137 8 p. (IFIP Advances in Information and Communication Technology; vol. 488).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  35. Published

    LeanMES Concept – An Approach to Manage Order-Delivery Information in a Production Network

    Järvenpää, E., Toivonen, V., Lanz, M. & Nieminen, H., 2016, Proceedings of the 26th International conference on Flexible Automation and Intelligent Manufacturing (FAIM2016). p. 988-995 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  36. Published

    Challenges of Knowledge and Information Management during New Product Introduction: Experiences from a Finnish Multinational Company

    Järvenpää, E., Kopra, M-J. & Lanz, M., 2016, In : Interdisciplinary Journal of Information, Knowledge, and Management. 11, p. 285 308 p.

    Research output: Contribution to journalArticleScientificpeer-review

  37. Published

    Capability Matchmaking Procedure to Support Rapid Configuration and Re-configuration of Production Systems

    Järvenpää, E., Siltala, N., Hylli, O. & Lanz, M., Sep 2017, In : Procedia Manufacturing. 11, p. 1053-1060 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  38. Published

    Formal resource and capability models supporting re-use of manufacturing resources

    Järvenpää, E., Lanz, M. & Siltala, N., Feb 2018, In : Procedia Manufacturing. 19, p. 87-94 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  39. Published

    The development of an ontology for describing the capabilities of manufacturing resources

    Järvenpää, E., Siltala, N., Hylli, O. & Lanz, M., Feb 2019, In : Journal of Intelligent Manufacturing. 30, 2, p. 959-978 20 p.

    Research output: Contribution to journalArticleScientificpeer-review

  40. Published

    Product Model ontology and its use in capability-based matchmaking

    Järvenpää, E., Siltala, N., Hylli, O. & Lanz, M., 27 Jun 2018, In : Procedia CIRP. 72, p. 1094-1099

    Research output: Contribution to journalArticleScientificpeer-review

  41. Published

    Utilizing SPIN rules to infer the parameters for combined capabilities of aggregated manufacturing resources

    Järvenpää, E., Hylli, O., Siltala, N. & Lanz, M., Sep 2018, In : IFAC-PapersOnLine. 51, 11, p. 84-89 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  42. Published

    Implementation of capability matchmaking software facilitating faster production system design and reconfiguration planning

    Järvenpää, E., Siltala, N., Hylli, O. & Lanz, M., Oct 2019, In : Journal of Manufacturing Systems. 53, p. 261-270

    Research output: Contribution to journalArticleScientificpeer-review

  43. Published

    Microstructure-property relationships of novel ultra-high strength press hardening steels

    Järvinen, H., Honkanen, M., Oja, O., Järvenpää, M. & Peura, P., 2019, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 50, 2, p. 816-836 21 p.

    Research output: Contribution to journalArticleScientificpeer-review

  44. Published

    A parameter study of a digital pump

    Jaurola, M. & Huhtala, K., 2010, Fluid Power and Motion Control (FPMC 2010), 15-17 September 2010, University of Bath, UK. Johnston, D. N. & Plummer, A. (eds.). p. 203-215

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  45. Published

    Valve parameter study in case of digital pump

    Jaurola, M., 2010, Proceedings of the 3rd GIM Scientific Workshop, February 17-18, 2010, Aalto University School of Science and Technology. Halme, A. & Pirttioja, T. (eds.). Espoo, p. 1-13 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  46. Published

    Analysis of single flank test results providing flank topography errors of spiral bevel gears

    Jerabek, F., 2000, Tampere: Tampere University of Technology. (Tampereen teknillinen korkeakoulu. Julkaisuja; vol. 314)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  47. Published

    On the effect of damping on stability of non-conservative systems

    Jeronen, J. & Kouhia, R., 2015, Proceedings of the XII Finnish Mechanics Days: Suomen XII mekaniikkapäivien esitelmät. Kouhia, R., Mäkinen, J., Pajunen, S. & Saksala, T. (eds.). Rakenteiden Mekaniikan Seura ry, p. 77 82 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  48. Published

    Multi-agent control of reconfigurable pallet transport systems

    Jokinen, J., 2010, Tampere: Tampere University of Technology. (Tampereen teknillinen yliopisto. Julkaisu; vol. 869)

    Research output: Book/ReportDoctoral thesisMonograph

  49. Published

    Inverse Methods for Continuous Balancing of Flexible Rolls

    Jokinen, K., 2010, Tampere: Tampere University of Technology. 107 p. (Tampereen teknillinen yliopisto. Julkaisu; vol. 944)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  50. Published

    Support-condition analyses of rotating beams under distributed imbalance loading

    Jokinen, K., Keskinen, E., Jorkama, M. & Seemann, W., 2011, ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE2011, November 11-17, 2011, Denver, Colorado, USA. New York, NY: ASME, p. 325-334 (ASME International Mechanical Engineering Congress and Exposition IMECE2011).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  51. Published

    A distributed balancing method for elastic rolls

    Jokinen, K. & Keskinen, E., 2010, Proceedings ot The Post-Graduate Workshop on Intelligent Machines and Transport Systems, May 3-7, 2010, Cern, Switzerland. Karvinen, T. & Keskinen, E. (eds.). p. 52-65

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  52. Published

    Continuous Models of Elastic Roll on Various Supports

    Jokinen, K. & Keskinen, E., 2011, 13th World Congress in Mechanism and Machine Science, Guanajuato, Mexico, 19-25 June, 2011. Guanajuato: Universidad de Guanajuato, p. 1-9 9 p. IMD-123. (World Congress in Mechanism and Machine Science).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  53. Published

    Condition monitoring for predictive maintenance in the pulp & paper industry: two implementions

    Jokinen, J., Postelnicu, C., Zhang, B., Camp, R., Suhonen, M., Karhumäki, O. & Martinez Lastra, J. L., 2012, Proceedings of 2012 IEEE International Conference on Systems, Man, and Cybernetics, SMC 2012, 14-17 October, 2012, COEX, Seoul, Korea. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, p. 1633-1638 (IEEE International Conference on Systems, Man and Cybernetics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  54. Published

    Industrial monitoring and control approach for dynamic and distributed intelligent systems

    Jokinen, J. & Martinez Lastra, J. L., 7 Nov 2016, 2016 IEEE 21st International Conference on Emerging Technologies and Factory Automation (ETFA). IEEE, (IEEE Emerging Technologies and Factory Automation).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  55. Published

    Implementation of nonintrusive monitoring and fault diagnosis in industrial robot system

    Jokinen, J. & Martinez Lastra, J. L., 2016, Proceedings of IEEE 14th International Conference on Industrial Informatics, INDIN 2016. IEEE, p. 457-462 (IEEE International Conference on Industrial Informatics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  56. Published

    Integrating Smart City Services using Arrowhead Framework

    Jokinen, J. & Latvala, T., 2016, Proceedings of IEEE 42nd Annual Conference on IEEE Industrial Electronics Society. IEEE

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  57. Published

    Condition monitoring for distributed systems with reconfigurable user interfaces and data permissions

    Jokinen, J., Bose Ambat, M. & Martinez Lastra, J. L., 2016, Proceedings of IEEE 42nd Annual Conference on IEEE Industrial Electronics Society. IEEE

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  58. Published

    Engineering Change Management Data Analysis from the Perspective of Information Quality

    Jokinen, L., Vainio, V. & Pulkkinen, A., 2017, In : Procedia Manufacturing. 11, p. 1626-1633 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  59. Published

    Sedimentation stability and rheological properties of ionic liquid-based bidisperse magnetorheological fluids

    Jönkkäri, I., Isakov, M. & Syrjälä, S., 2014, In : Journal of Intelligent Material Systems and Structures. 26, 16, p. 2256-2265 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  60. Published

    Design of a portable motion platform using pneumatic muscle actuators

    Jouppila, V., Itäsalo, A-V., Kuosa, J. & Ellman, A., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Sairala, H. & Koskinen, K. T. (eds.). Tampere: Scandinavian International Conference on Fluid Power, p. 1-15 15 p. (Scandinavian International Conference on Fluid Power SICFP).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  61. Published

    Sliding mode control of a pneumatic muscle actuator system with a PWM strategy

    Jouppila, V. T., Gadsden, A. S., Bone, G. M., Ellman, A. U. & Habibi, S. R., 2014, In : International Journal of Fluid Power. 15, 1, p. 19-31 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  62. Published

    Model-based development in the domain of mobile machines

    Jouppila, V., Kaapu, T., Sjöstedt, C-J., Ellman, A. & Chen, D-J., 2014, Digital proceedings of the tenth International Symposium on Tools and Methods of Competitive Engineering - TMCE 2014, May 19-23, Budapest, Hungary. Horvath, I. & Rusak, Z. (eds.). Delft: Delft University of Technology, p. 759-772 14 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  63. Published

    Position control fo PWM-actuated pneumatic musckle actuator system

    Jouppila, V. & Ellman, A., 2011, ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE2011, November 11-17, 2011, Denver, Colorado, USA. New York, NY: ASME, (ASME International Mechanical Engineering Congress and Exposition IMECE2011).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  64. Published

    Modeling and control of a pneumatic muscle actuator

    Jouppila, V., 4 Apr 2014, Tampere: Tampere University of Technology. 95 p. (Tampere University of Technology. Publication; vol. 1199)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  65. Published

    Experimental Comparisons of Sliding Mode Controlled Pneumatic Muscle and Cylinder Actuators

    Jouppila, V., Gadsden, A. S. & Ellman, A., 2014, In : Journal of Dynamic Systems, Measurement and Control: Transactions of the ASME. 136, 4, 10 p., 044503.

    Research output: Contribution to journalArticleScientificpeer-review

  66. Published

    Modeling and identification of a pneumatic muscle actuator system controlled by on/off solenoid valve

    Jouppila, V., Gadsden, A. & Ellman, A., 2010, Proceedings of the 7th International Fluid Power Conference IFK, Aachen, Germany, 22 - 24 March, 2010. p. 1-34 34 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  67. Published

    Kitkaväsymisen tuomat haasteet

    Juoksukangas, J. & Lehtovaara, A., 2012, In : Materia. 70, 5, p. 56-57

    Research output: Contribution to journalArticleProfessional

  68. Published

    The effect of contact edge geometry on fretting fatigue behavior in complete contacts

    Juoksukangas, J., Lehtovaara, A. & Mäntylä, A., 2013, In : Wear. 308, 1-2, p. 206-212 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  69. Published

    Development of a complete contact fretting test device

    Juoksukangas, J., Lehtovaara, A. & Mäntylä, A., 2013, In : Proceedings of the institution of Mechanical Engineers Part J: Journal of Engineering Tribology. 227, 6, p. 570-578

    Research output: Contribution to journalArticleScientificpeer-review

  70. Published

    The effect of contact edge geometry on fretting fatigue behavior in complete contacts

    Juoksukangas, J., Lehtovaara, A. & Mäntylä, A., 2012, 15th Nordic Symposium on Tribology, NordTrib 2012, 12-15 June 2012, Trondheim Norway. Trondheim: NTNU Norwegian University of Science and Technology, p. 1-6 6 p. (Nordic Symposium on Tribology).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  71. Published

    Response to discussion with DA Hills et al., concerning the article "Development of a complete contact fretting test device" by J. Juoksukangas et al.

    Juoksukangas, J., Lehtovaara, A. & Mäntylä, A., 2014, In : Proceedings of the institution of Mechanical Engineers Part J: Journal of Engineering Tribology. 228, 1, p. 127-128 2 p.

    Research output: Contribution to journalArticleScientific

  72. Published

    Development of a test rig for reciprocating seals in heavy load conditions

    Juoksukangas, J., Lehtovaara, A., Miettinen, J., Tolvanen, P., Järvelä, P. & Niemi, A-M., 2010, 14th Nordic Symposium on Tribology, Nordtrib 2010, Storforsen, Sweden, Luleå University of Technology. p. 1-8 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  73. Published

    Modelling and Experimental Analysis of Fretting Fatigue in Complete and Bolted Contacts

    Juoksukangas, J., 24 May 2017, Tampere University of Technology. 58 p. (Tampere University of Technology. Publication; vol. 1472)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  74. Published

    Characterization of cracks formed in large flat-on-flat fretting contact

    Juoksukangas, J., Nurmi, V., Hintikka, J., Vippola, M., Lehtovaara, A., Mäntylä, A., Vaara, J. & Frondelius, T., Jul 2019, In : International Journal of Fatigue. 124, p. 361-370 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  75. Published

    Champion-työkalut: Fasilitoijan ohjeet. Mestariluokan työkalut hankkeiden valmisteluun ja toteuttamiseen

    Juuti, T., Kopra, M-J., Halonen, N. & Tapaninaho, M., 2014, Tampere: Tampereen teknillinen yliopisto. Kone- ja tuotantotekniikan laitos. 80 p.

    Research output: Book/ReportBookProfessional

  76. Published

    Design management in product development organisation - the elaboration of comprehensive design management model

    Juuti, T. & Lehtonen, T., 2010, NordDesign 2010 Conference, 25-27 August, 2010, Göteborg, Sweden. Dagman, A. & Söderberg, R. (eds.). p. 65-74

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  77. Published

    Design education with simulation games

    Juuti, T., Hansen, P. K. & Lehtonen, T., 2008, Proceedings of the 10th Engineering and product design Eduacation International Conference, 4-5 September, 2008, Universitat Politecnica de Catalunya, Barcelona, Spain. Clarke, A., Evatt, M., Hogarth, P., Lloveras, J. & Pons, L. (eds.). p. 811-816

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  78. Published

    Product development education - Conceptual modelling, knowledge integration and metacognition

    Juuti, T., Lehtonen, T. & Rättyä, K., 2012, 4th International Conference on Engineering and Product Design Education: Design Education for Future Wellbeing, EPDE 2012, 6-7 September, Antwerp; Belgium. p. 83-88 6 p. (International Conference on Engineering and Product Design Education).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  79. Published

    Design management of product with variability and commonality

    Juuti, T., 2008, Tampere: Tampere University of Technology. 153 p. (Tampereen teknillinen yliopisto. Julkaisu; vol. 789)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  80. Published

    Design reasoning patterns in NPD education design

    Juuti, T., Lehtonen, T., Rättyä, K., Halonen, N., Vanhatalo, M. & Kujansuu, P., 2014, Proceedings of 16th International Conference on Engineering and Product Design Education, University of Twente, Enschede, The Netherlands 4th-5th September 2014. Bohemia, E., Eger, A., Eggink, W., Kovacevic, A., Parkinson, B. & Wits, W. (eds.). The Design Society, p. 682-687 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  81. Published

    Framework for managing activity-based optimisation of order-delivery process

    Juuti, J., 29 Apr 2005, Tampere: Tampere University of Technology. 238 p. (Tampere University of Technology. Publication; vol. 529)

    Research output: Book/ReportDoctoral thesisMonograph

  82. Published

    Champion tools: The facilitator's handbook

    Juuti, T., Kopra, M-J., Lehtonen, T., Tuokko, R. & Lanz, M., 2015, Tampere: Tampere University of Technology. Department of Mechanical Engineering and Industrial Systems. 68 p.

    Research output: Book/ReportBookProfessional

  83. Published

    NPD Risk Management with Experiential Learning Oriented Method

    Juuti, T. & Kopra, M-J., 12 Aug 2016, NordDesign 2016 Proceedings Part2. Trondheim, p. 390-399

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  84. Published

    How to benefit from learning logs in engineering education?

    Juuti, T., Kopra, M. J., Rättyä, K. & Lehtonen, T., 2016, 44th Annual Conference of the European Society for Engineering Education - Engineering Education on Top of the World: Industry-University Cooperation, SEFI 2016. European Society for Engineering Education SEFI

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  85. Published

    Learning logs in product development education

    Juuti, T., Rättyä, K. & Lehtonen, T., 2016, Proceedings of the 18th International Conference on Engineering and Product Design Education: Design Education: Collaboration and Cross-Disciplinarity, E and PDE 2016. Institution of Engineering Designers, The Design Society, p. 296-301 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  86. Published

    A Semi-Fidelity Training Simulator: Promising Opportunities for Student-Centered Learning

    Kaapu, T., Tiainen, T. & Ellman, A., 2014, Proceedings of the 22nd European Conference on Information Systems, ECIS 2014, June 9-11, 2014,Tel Aviv. 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  87. Published

    User Interpretations of Virtual Prototypes: Physical Place Matters

    Kaapu, T., Tiainen, T. & Ellman, A., 2014, In : Scandinavian Journal of Information Systems. 25, 2, p. 1-22 22 p., 4.

    Research output: Contribution to journalArticleScientificpeer-review

  88. Published

    Studying Users and Virtual Prototyping in Machine Design

    Kaapu, T., Ellman, A. & Tiainen, T., 2011, Proceedings of IRIS 2011 Conference, 16.-19.8.2011, Turku, Finland. TUCS Lecture Notes. Leino, T. (ed.). Turku: TURKU CENTRE FOR COMPUTER SCIENCE, p. 358-369 (IRIS Conference; vol. 15).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  89. Published

    Phenomenography: alternative research approach for studying the diversity of users' understandings

    Kaapu, T. & Tiainen, T., 2012, Proceedings of the European Conference for Information Systems ECIS 2012, June 10-13, 2012 ESADE, Barcelona, Spain. Barcelona, SPain, Paper 29. (European Conference on Information Systems).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  90. Published

    UV-Blocking Synthetic Biopolymer from Biomass-Based Bifuran Diester and Ethylene Glycol

    Kainulainen, T. P., Sirviö, J. A., Sethi, J., Hukka, T. I. & Heiskanen, J. P., 21 Feb 2018, In : Macromolecules. 51, 5, p. 1822-1829 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  91. Published

    Dynamic Modeling and Simulation of a Cylindrical Grinder in Presence of Non-linear Friction Effect

    Kalbasi Shirvani, H., Järvenpää, V-M. & Yuan, L., 2013, Proceedings in Research Conference in Technical Disciplines, RCITD 2013, 18.-22. November 2013, Slovak Republic. Mokrys, M., Badura, S. & Lieskovsky, A. (eds.). Zilina: EDIS, p. 47-52 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  92. Published

    The influence of chatter vibration on the cylindrical transverse grinding machine spindle

    Kalbasi Shirvani, H., Yuan, L. & Järvenpää, V-M., 2014, Proceedings of the 21st International Congress on Sound and Vibration , In Depth Sound and Vibration Research, 2014, ICSV21, 13-17 July, 2014, Beijing, China. Crocker, M. J., Pawelczyk, M. & Tian, J. (eds.). International Institute of Acoustics and Vibration (IIAV), p. 3280-3287 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  93. Published

    Ventilation and indoor air quality in school buildings

    Kalema, T. & Viot, M., 2013, Sisäilmastoseminaari 2013, Messukeskus, Helsinki 13.3.2013. Säteri, J. & Backman, H. (eds.). SIY Sisäilmayhdistys ry, p. 91-96 6 p. (SIY Raportti; no. 31).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  94. Published

    Methods to reduce the CO2 concentration of educational buildings utilizing internal ventilation by transferred air

    Kalema, T. & Viot, M., 2013, In : Indoor Air. p. 1-10 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  95. Published

    Sisäilman laadun parantaminen käyttämällä siirtoilmaa - Uusia ratkaisuja

    Kalema, T., Lassila, A-P. & Viot, M., 2014, Sisäilmastoseminaari 2014, Messukeskus, Helsinki 13.3.2014. Säteri, J. & Backman, H. (eds.). Espoo: SIY SISÄILMATIETO OY, p. 263-268 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  96. Published

    Talotekniikka

    Kalema, T. & Joutsi, J., 2013, Tampere: Tampereen teknillinen yliopisto. 6 p. (Tampereen teknillinen yliopisto. Rakennustekniikan laitos. Rakennustuotanto ja -talous. Raportti; vol. 14)

    Research output: Book/ReportCommissioned reportProfessional

  97. Published

    Improving learning results with peer evaluation

    Kallela, T., Lanz, M., Rapo, L. & Riitahuhta, A., 2008, New Perspectives in design education, Universitat Politecnica de Catalunya, 4-5 September, 2008, Barcelona, Spain. Clarke, A. (ed.). p. 799-804

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  98. Published

    CFD based on-line process analysis - applied to circulating and bubbling fluidized bed processes

    Kallio, S., Saarenrinne, P., Peltola, J., Tähtinen, M., Saxén, H., Kärkkäinen, T., Niemi, T., Karvonen, L., Nevalainen, H., Elfvengren, J., Kolehmainen, J., Hermanson, A., Mondal, D. & Maslov, A., 2014, Espoo: VTT. 43 p. (Research report VTT-R; no. 04576-14)

    Research output: Book/ReportCommissioned reportProfessional

  99. Published

    Tribological behavior of bronze alloys with solid lubricants

    Kallio, M., Vuorinen, P., Fluentes, E., Marana, O., Ruusila, V., Nyyssönen, T., Kuokkala, V-T. & Lehtovaara, A., 2013, In : Key Engineering Materials. 527, p. 205-210 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  100. Published

    ISO 11783 compliant forest crane as a platform for automatic control

    Kalmari, J., Pihlajamäki, T., Hyyti, H., Luomaranta, M. & Visala, A., 2013, The 4th IFAC Conference on Modelling and Control in Agriculture, Horticulture and Post Harvest Industry, 28-30 August, 2013, Espoo, Finland. p. 164-169 6 p. (Elsevier IFAC Publications / IFAC Proceedings series).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Previous 1 2 3 4 5 6 7 8 ...13 Next
Download list To download, please limit the number of search results to 1,000 or less.