Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. Published

    Siporex-tehtaan jätevesien biologinen käsiteltävyys

    Vuoriranta, P. & Rantala, P-R., 1988, Unknown Publisher. 30 p. (Tutkimusraportti Ikaalisten kaupungille)

    Research output: Book/ReportCommissioned reportProfessional

  2. Published

    Sludge Characteristics in UASB reactor treating thermomechanical pulping effluents

    Vuoriranta, P., Rintala, J. & Kirjavainen, H., 1985, In : Water Science and Technology. p. 313-316

    Research output: Contribution to journalArticleScientificpeer-review

  3. Published

    Phosphorus control in the Finnish pulp and paper mill effluents

    Vuoriranta, P. & Hynninen, P., 1989, Environmental Aspects of Pulping Operations and their Wastewater Implications, Edmonton, Canada, 27.-29.7.1989. p. 15 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  4. Published

    Aktiivilieteprosessi

    Vuoriranta, P., 2002, Mikrobiologian perusteita. Salkinoja-Salonen, M. (ed.). Gummerus Kirjapaino Oy, p. 445-460

    Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

  5. Published

    Phosphorus balance in activated sludge plants treating paper mill effluents

    Vuoriranta, P., 1992, COMETT Short Course on Pulp and Paper Industry Wastewaters. 5.3.1992, Jyväskylä, Finland.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  6. Published

    Veden laatu kehitysmaissa

    Vuoriranta, P., 1989, Ympäristöhygieniaa kehitysmaissa, Kuopio, 6.-7.9.1989.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  7. Published

    Tilastotietoja vuodelta 1989

    Vuoriranta, S., 1990, Tampereen teknilinen korkeakoulu, Hallintovirasto. 33 p.

    Research output: Book/ReportCommissioned reportProfessional

  8. Published

    Smart material actuators for fluid power valves with different pressure mediums

    Vuorisalo, M. & Virvalo, T., 2000, Mechatronics and machine vision. Billingsley, J. (ed.). p. 305-313

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  9. Published

    Use of Fast On-Off Valves in Pressure Control in Water Hydraulics

    Vuorisalo, M., Virvalo, T., Koskinen, K. T. & Vilenius, M., 1999, Proceedings of The Sixth Scandinavian International Conference on Fluid Power, May 26 - 28, 1999, Tampere, Finland. Koskinen, K. T., Vilenius, M. & Tikka, K. (eds.). Tampere, p. 699-710

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  10. Published

    Use of Shape Memory Alloy for a Pilot Stage Actuator of a Water Hydraulic Control Valve

    Vuorisalo, M. & Virvalo, T., 2002, Proceedings of the 5th International Symposium on Fluid Power, Nara 2002, November 13, 2002. Japan, p. 149-154

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  11. Published

    Different types of pilot stages for a water hydraulic control valve

    Vuorisalo, M., Virvalo, T. & Anttonen, P., 2001, Proceedings of the Fifth International Conference on Fluid Power Transmission and Control (ICFP´2001) April 3-5, 2001, Hangzhou, China. Lu, Y., Chen, Y. & Xu, L. (eds.). Kiina, p. 435-439

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  12. Published

    Shape memory actuator for fluid control valves

    Vuorisalo, M. & Virvalo, T., 2002, Proceedings of the ICMA´02, The Fourth International Conference on Machine Automation Human-Friendly Reliable Mechatronics, Tampere, Finland, September 11-13, 2002. Kivikoski, M. (ed.). Tampere, Finland: Tampere University of Technology, p. 157-164

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  13. Published

    Comparing the control methods of fast water hydraulic on/off-valves in pressure control

    Vuorisalo, M. & Virvalo, T., 2000, Proceedings of the 7th Mechatronics Forum International Conference, 6th-8th September, 2000, Atlanta, Georgia, USA. p. 5 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  14. Published

    Microstructure and abrasion wear resistance of laser-clad TiC-Ni coatings on low carbon steel

    Vuoristo, P. & Mäntylä, T., 1997, Tampere: Tampereen teknillinen korkeakoulu. 10 p. (Tampereen teknillinen korkeakoulu, Materiaaliopin laitos, Raportti; no. 3/1997)

    Research output: Book/ReportCommissioned reportProfessional

  15. Published

    Structure and abrasive wear properties of carbide coatings prepared by Hobart Tafa JP-5000 HP/HVOF spray system

    Vuoristo, P., Niemi, K., Mäkelä, A. & Mäntylä, T., 1993, Tampere: Tampere University of Technology. 11 p. (Tampere University of Technology, Institute of Materials Science, Report; no. 47/1993)

    Research output: Book/ReportCommissioned reportProfessional

  16. Published

    High temperature electrical insulating properties of rf magnetron sputtered alumina coatings on copper

    Vuoristo, P., Mäntylä, T. & Kettunen, P., 1989, Proc. New Materials and Processes, 5th SSMS Scandinavian Symposium on Materials Science, Copenhagen,Denmark, May 22-25, 1989. Hansson, I. L. H. & Lilholt, H. (eds.). p. 713-720

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  17. Published

    Abstracts of the 28th International Conference on Surface Modification Technologies, SMT28, Tampere University of Technology, Tampere, Finland, June 16-18, 2014

    Vuoristo, P. (ed.), Koivuluoto, H. (ed.) & Sudarshan, T. S. (ed.), 2014, Tampere: Tampere University of Technology. 150 p.

    Research output: Book/ReportAnthologyScientificpeer-review

  18. Published

    Sputtered Al2O3 and MgO Coatings for Electrical Insulation at High Temperatures - An Application to Interelectrode Insulation of Copper Electrodes in MHD Generators

    Vuoristo, P., 1991, Tampereen teknillinen korkeakoulu. (Tampereen teknillinen korkeakoulu)

    Research output: Book/ReportCommissioned reportProfessional

  19. Published

    Timantinkaltaiset hiilipinnoitteet

    Vuoristo, P., 1986, Tampere: Tampereen teknillinen korkeakoulu. 46 p. (Tampereen teknillinen korkeakoulu, Materiaaliopin laitos, Raportti; no. 50/1986)

    Research output: Book/ReportCommissioned reportProfessional

  20. Published

    Titaanit ja titaaniseokset

    Vuoristo, P. & Siitonen, P., 1985, Raaka-ainekäsikirja 3 Kuparit, kevytmetallit. Valmet: Rautpohja, p. 175-226

    Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

  21. Published

    Structure and abrasion wear resistance of tungsten carbide and chromium carbide coatings deposited by CDS/HVOF spray method

    Vuoristo, P., Niemi, K. & Mäntylä, T., 1994, Tampere: Tampere University of Technology. 19 p. (Tampere University of Technology, Institute of Materials Science, Report; no. 44/1994)

    Research output: Book/ReportCommissioned reportProfessional

  22. Published

    Pinnoitettu MHD-elektrodi

    Vuoristo, P., Mäntylä, T. & Kettunen, P., 1989, Tampere: Tampereen teknillinen korkeakoulu. 36 p. (TTKK/Materiaalioppi, Raportti; no. 29)

    Research output: Book/ReportCommissioned reportProfessional

  23. Published

    Terminen ruiskupinnoitus

    Vuoristo, P., 2004, In : Hitsaustekniikka. 5, p. 2-3

    Research output: Contribution to journalArticleProfessional

  24. Published

    Laser coating and thermal spraying - process basics and coating properies

    Vuoristo, P., Tuominen, J. & Nurminen, J., 2005, International Thermal Spray Conference & Exposition ITSC 2005, Basel, Swizerland, May 2 - 4, 2005. p. 8 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  25. Published

    Application of Sputtered Alumina Coatings as Insulating Coatings for Metallic MHD Electrode and Insulator Modules

    Vuoristo, P., Mäntylä, T. & Kettunen, P., 1991, In : Magnetohydrodynamics - An International Journal. 3, 1/2, p. 55-63

    Research output: Contribution to journalArticleScientificpeer-review

  26. Published

    Super D-Gun -menetelmällä valmistettujen karbidipinnoitteiden rakenne ja kulumiskestävyys

    Vuoristo, P., Niemi, K., Mäkelä, A. & Mäntylä, T., 1994, Tampere: Tampereen teknillinen korkeakoulu. 11 p. (Tampereen teknillinen korkeakoulu, Materiaaliopin laitos, Raportti; no. 15/1994)

    Research output: Book/ReportCommissioned reportProfessional

  27. Published

    Dynamic compression testing of particle-reinforsed polymer roll cover materials

    Vuoristo, T., Kuokkala, V-T. & Keskinen, E., 2000, In : Composites: Part A 31. A31, A 31, p. 815-822

    Research output: Contribution to journalArticleScientificpeer-review

  28. Published

    Pre-strain dependent apparent Young´s modulus of automotive sheets steels

    Vuoristo, T., Kuokkala, V-T. & Peura, P., 2004, Proceedings of the 2004 SEM X International Congress and Exposion on Experimental and Applied Mechanics, June 7-10, 2004 Costa Mesa, California USA. p. 162-170

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  29. Published

    Development of HVOF sparyed NiCoCrAlYRe coatings for use as bond coats of plasma sprayed thermal barrier coatings

    Vuoristo, P., Ahmaniemi, S., Tuurna, S., Mäntylä, T., Cordano, E., Fignino, F. & Gualco, G. C., 2002, International Thermal Spray Conference, Essen 4.-6.3.2002. Lugscheider, E. (ed.). p. 470-475

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  30. Published

    Painevalumuottien CVD-pinnoitus

    Vuoristo, I., Mäntylä, T. & Kettunen, P., 1985, Tampere: Tampereen teknillinen korkeakoulu. (Tampereen teknillinen korkeakoulu, Materiaaliopin laitos, Raportti; no. 10/1985)

    Research output: Book/ReportCommissioned reportProfessional

  31. Published

    Hard Oxide Coatings Deposited by Plasma Spraying and Detonation Gun Spraying Techniques

    Vuoristo, P. M. J., Niemi, K. J. & Mäntylä, T. A., 1991, Proc. 2nd Plasma-Technik-Symposium, Lucerne, Switzerland, June 5-7, 1991. p. 323-331

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  32. Published

    Engineering surfaces by thermally sprayed polymer coatings

    Vuoristo, P., 2005, Engineering of Surface Properties of Plastic and Composite Materials/Thermal Analysis of polymers, Kokkola 20.-21.9.2005. p. 22 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  33. Published

    Electrical Insulating Properties of R.F. - Sputtered Magnesia Coatings

    Vuoristo, P., Wahlroos, J., Mäntylä, T. & Kettunen, P., 1988, In : Thin Solid Films. 166

    Research output: Contribution to journalArticleScientificpeer-review

  34. Published

    Termisesti ruiskutetut polymeeripinnoitteet

    Vuoristo, P., Harju, M. & Mäntylä, T., 1997, In : Pintatekniikka. 3, p. 32-35

    Research output: Contribution to journalArticleProfessional

  35. Published

    Structure and wear properties of thermal sprayed (Ti,Mo)C-NiCo cermet coatings

    Vuoristo, P., Niemi, K., Jouve, B., Stenberg, T., Mäntylä, T., Berger, L-M., Nebelung, M. & Hermel, W., 1995, Proc of ITSC '95 (International Thermal Spray Conference '95), Kobe, Japan, 22-26 May 1995. Osaka, Japan, p. 699-704

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  36. Published

    Properties of ceramic coatings prepared by HVOF and plasma spraying of titanium suboxide powders

    Vuoristo, P., Määttä, A., Mäntylä, T., Berger, L-M. & Thiele, S., 2002, International Thermal Spray Conference, Essen 4.-6.3.2002. Lugscheider, E. (ed.). p. 488-493

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  37. Published

    Modelling of the Deformation Behaviour of Polymer Composites at High Strain Rates and at Elevated Temperatures

    Vuoristo, T., Kuokkala, V-T. & Keskinen, E., 2002, In : Key Engineering Materials. 221-222, p. 221-232

    Research output: Contribution to journalArticleScientificpeer-review

  38. Published

    Onteloelementtien valmistuksessa käytettävän ruuvin kulumistutkimus

    Vuoristo, P., Niemi, K. & Mäntylä, T., 1992, Tampereen teknillinen korkeakoulu. 6 p. (Tampereen teknillinen korkeakoulu, Materiaalioppi, Raportti; no. 38/1992)

    Research output: Book/ReportCommissioned reportProfessional

  39. Published

    Effect of pre-straining on the apparent young´s modulus of bake-hardenable high strength steels

    Vuoristo, T., Kuokkala, V-T., Curtze, S. & Peura, P., 2005, Proceedings of a Symposium Materials Science & Technology, Springback in Sheet Metal Forming Applications, September 25-28, 2005, Pittsburgh, Pennsylvania, USA. p. 17-26

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  40. Published

    Pinnoitteille lisää sovellutuksia - teollisuudesta etsitään uusia käyttökohteita

    Vuoristo, P., Niemi, K. & Mäntylä, T., 1992, In : Kunnossapitolehti. 1, p. 18-21

    Research output: Contribution to journalArticleProfessional

  41. Published

    Magnesiumseokset konstruktiomateriaaleina

    Vuoristo, P., 1989, Materiaalitieteen kesäseminaari, Materiaalitieteellinen Yhdistys r.y. ja TTKK, Materiaaliopin laitos, Hartola, 13.-14.6.1989.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  42. Published

    Rolling contact fatigue (RCF) of failure mechanisms of thermally sprayed coatings under non-sliding and sliding conditions (F17)

    Vuoristo, P. & Mäntylä, T., 2001, C0ST Action 516 - Tribology - Scientific final report. Holmberg, K. (ed.). Belgium: European Communities, p. 264-268

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  43. Published

    Microstructure and Properties of Thermally Sprayed TiC-Ni and (Ti,Mo)C-NiCo Coatings

    Vuoristo, P., Stenberg, T., Mäntylä, T., Berger, L-M. & Nebelung, M., 1996, Thermal Spray: Practical Solutions for Engineering Problems, Proc. of 9th National Thermal Spray Conference, 7-11.1996. Berndt, C. C. (ed.). Materiasl Park, Ohio: ASM International, p. 729-734

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  44. Published

    Kulumista kestävät pintakäsittelyt ja pinnoitteet

    Vuoristo, P. & Mäntylä, T., 1997, In : Pintatekniikka. 2, 1, p. 8-17

    Research output: Contribution to journalArticleProfessional

  45. Published

    Detonaatiopinnoitus tuli Suomeen

    Vuoristo, P. & Niemi, K., 1990, In : Konepajamies. 43, 5, p. 30-31

    Research output: Contribution to journalArticleProfessional

  46. Published

    Termisen ruiskutuksen toiminta Suomessa - teollinen pinnoitus, tutkimus, kehitys ja koulutus

    Vuoristo, P., 2004, In : Hitsaustekniikka. 5, p. 41-43

    Research output: Contribution to journalArticleProfessional

  47. Published

    Nestelaakeripalojen pinnoitteiden rakenne

    Vuoristo, P., Niemi, K. & Mäntylä, T., 1993, Tampere: Tampereen teknillinen korkeakoulu. 9 p. (Tampereen teknillinen korkeakoulu, Materiaaliopin laitos, Raportti; no. 33/1993)

    Research output: Book/ReportCommissioned reportProfessional

  48. Published

    Surface changes in thermally sprayed hard coatings by wear of different abrasives

    Vuoristo, P., Laurila, J., Mäntylä, T., Niemi, K., Rekola, S. & Ahmaniemi, S., 2004, ITSC 2004, International Thermal Spray Conference & Exposition, Thermal Spray Solutions, Advances in Technology and Application, Osaka, Japan, May 10-12, 2004. p. 6 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  49. Published

    RBS analysis of sputter-deposited MgO films

    Vuoristo, P., Mäntylä, T., Kettunen, P. & Lappalainen, R., 1991, In : Vacuum. 42, 15, p. 1001-1004

    Research output: Contribution to journalArticleScientificpeer-review

  50. Published

    Structure and wear properties of WC+17%Co coatings prepared by HVOF and detonation gun spraying

    Vuoristo, P., Niemi, K., Mäkelä, A. & Mäntylä, T., 1993, Tampere University of Technology. 15 p. (Tampere University of Technology, Institute of Materials Science, Report; no. 46/1993)

    Research output: Book/ReportCommissioned reportProfessional

  51. Published

    First International Conference on Plasma Surface Engineering

    Vuoristo, P., 1988, Tampereen teknillinen korkeakoulu. 10 p. (TTKK, Materiaaliopin laitos, Raportti; no. 53/1988)

    Research output: Book/ReportCommissioned reportProfessional

  52. Published

    Creep, recovery and high strain rate response of soft roll cover materials

    Vuoristo, T. & Kuokkala, V-T., 2002, In : Mechanics of Materials. 34, p. 493-504

    Research output: Contribution to journalArticleScientificpeer-review

  53. Published

    Abrasion wear resistance of some carbide containing coatings deposited by laser cladding

    Vuoristo, P., Niemi, K. & Mäntylä, T., 1991, Tampere: Tampere University of Technology. 9 p. (Tampere University of Technology, Institute of Materials Science, Report; no. 23/1991)

    Research output: Book/ReportCommissioned reportProfessional

  54. Published

    Pinnoitteille lisää sovelluksia - myös muoviteollisuudesta etsitään uusia käyttökohteita

    Vuoristo, P., Niemi, K. & Mäntylä, T., 1993, In : Muovi - Plast. 2, p. 18-22

    Research output: Contribution to journalArticleProfessional

  55. Published

    Post-processing thermally sprayed coatings by high power Nd:YAG laser

    Vuoristo, P., Tuominen, J. & Mäntylä, T., 2000, Nordisk Konferens Termisk Sprutning, Köpenhamn 4-5, oktober 2000. p. 9 s.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  56. Published

    Evaluation of Thermally Sprayed and Other Polymeric Coatings for Use in Natural Gas Pipeline Components

    Vuoristo, P., Leivo, E., Turunen, E., Leino, M., Järvelä, P. & Mäntylä, T., 2003, Thermal Spray 2003, Advancing the Science and Applying the Technology, Vol. 2, Proceedings of the 2003 International Thermal Spray Conference, 5-8 May, Orlando, Florida, USA. Marple, B. R. & Moreau, C. (eds.). ASM International, p. 1693-1702

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  57. Published

    Spray parameter effects on structure and properties of detonation gun sprayed WC+17%Co coatings

    Vuoristo, P., Niemi, K., Mäkelä, A. & Mäntylä, T., 1993, Thermal Spray Coatings: Research, Design and Applications. Proceedings of 5th National Thermal Spray Conference NTSC'93, June 7-11, Anaheim, California, U SA. p. 173-178

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  58. Published

    Comparison of Different Hardmetal-like Coatings Sprayed by Plasma and Detonation Gun Processes

    Vuoristo, P., Niemi, K., Mäntylä, T., Berger, L-M. & Nebelung, M., 1995, Advances in Thermal Spray Science and Technology, Proc. of the Eight National Thermal Spray Conference, 11-15. September 1995. Berndt, C. C. & Sampath, S. (eds.). Materials Park, OH: ASM International, p. 309-315

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  59. Published

    Laserpinnoitus- ja pintakäsittely

    Vuoristo, P., 2005, Tampere Laser Summit Seminar 2005, New Laser Technologies for Renewing the Industry, 7.6.2005, TTY. p. 123-132

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  60. Published

    Strain rate dependent deformation behavior of cold heating steels

    Vuoristo, T., Kuokkala, V-T., Rämö, J., Partinen, J. & Kolsi, J., 2006, Asia Steel International Conference 2006, (Asia Steel ´06), 90th Anniversary, May 9-11, 2006 Fukuoka, Japan. p. 902-907

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  61. Published

    Modification of the structure and properties of thermally sprayed coatings by various post-processing methods

    Vuoristo, P., 2000, Metal 2000, 9th International Metallurgical Conference, 16.-18.5.2000 Ostrava. Ostrava: Tanger, spol. s r.o. Ostrava, p. 1-8 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  62. Published

    Stoichiometry and Impurities in Sputtered Alumina Films on Copper

    Vuoristo, P., Mäntylä, T., Kettunen, P. & Lappalainen, R., 1991, In : Thin Solid Films. 204, p. 297-311

    Research output: Contribution to journalArticleScientificpeer-review

  63. Published

    Terminen ruiskutus - menetelmät, pinnoitteet ja teolliset sovellukset

    Vuoristo, P., 2004, In : Hitsaustekniikka. 5, p. 5-18

    Research output: Contribution to journalArticleProfessional

  64. Published

    Laser coating as an industrial coating process

    Vuoristo, P., 2002, Euroceram Interregional Seminar in Tampere region, 10.-11.9.2002, Ceramic Coatings (Pinnoitepäivät). Leivo, J. (ed.). Tampere: TTKK, Materiaaliopin laitos, p. 12 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  65. Published

    Behavior of hot dip galvanized dual phase sheets steels at high rates of deformation

    Vuoristo, T., Apostol, M., Kuokkala, V-T. & Peura, P., 2004, In : Journal de Physique IV. 110, p. 213-218

    Research output: Contribution to journalArticleScientificpeer-review

  66. Published

    ZrO2-pohjaisten keraamijauheiden detonaatiopinnoitus

    Vuoristo, P., Niemi, K. & Mäntylä, T., 1991, Tampere: Tampereen teknillinen korkeakoulu. 18 p. (Tampereen teknillinen korkeakoulu, Materiaaliopin laitos, Raportti; no. 29/1991)

    Research output: Book/ReportCommissioned reportProfessional

  67. Published

    Terminen ruiskutus Pohjoismaissa

    Vuoristo, P. & Nylen, P., 2007, In : Hitsaustekniikka. 57, 6, p. 7-10

    Research output: Contribution to journalArticleProfessional

  68. Published

    MoCVD-menetelmällä valmistetut alumiini- ja magnesiumoksidipinnoitteet

    Vuoristo, P., 1986, Tampere: Tampereen teknillinen korkeakoulu. 19 p. (Tampereen teknillinen korkeakoulu, Materiaaliopin laitos, Raportti; no. 40/1986)

    Research output: Book/ReportCommissioned reportProfessional

  69. Published

    Plasmaruiskutetuista oksidipinnoitteista

    Vuoristo, P., 1985, Tampere: Tampereen teknillinen korkeakoulu. (Tampereen teknillinen korkeakoulu, Materiaaliopin laitos, Raportti; no. 29/1985)

    Research output: Book/ReportCommissioned reportProfessional

  70. Published

    Characterization of soft polymer roll covers

    Vuoristo, T. & Kuokkala, V-T., 2004, Proceedings of the 2003 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, June 2-4, 2004, Charlotte, North Carolina, USA. p. 64-74

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  71. Published

    Preparation, structure and wear properties of detonation gun sprayed WC and Cr3C2 based cermet coatings

    Vuoristo, P., Niemi, K., Mäkelä, A. & Mäntylä, T., 1993, Proceedings of 1993 Thermal Spray Conf. (TH '93), March 3.-5, Aachen, Federal Republic of Germany. p. 310-313

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  72. Published

    Wear resistant coatings with low friction properties for high temperature applications (F110)

    Vuoristo, P. & Mäntylä, T., 2001, C0ST Action 516 - Tribology - Scientific final report. Holmberg, K. (ed.). Belgium: European Communities, p. 120-125

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  73. Published

    Plasmaruiskutuspinnoitteita vaativiin kohteisiin

    Vuoristo, P. & Niemi, K., 1986, In : Hitsaustekniikka. 4/1986, p. 39-42

    Research output: Contribution to journalArticleProfessional

  74. Published

    Sputteroitujen krominitridi- ja molybdeeninitridipinnoitteiden rakenne ja ominaisuudet sekä soveltuminen kuparin muovaukseen

    Vuoristo, P., Mäntylä, T. & Kettunen, P., 1989, Tampere: Tampereen teknillinen korkeakoulu. 54 p. (TTKK/Materiaalioppi, Raportti; no. 26)

    Research output: Book/ReportCommissioned reportProfessional

  75. Published

    Structure and Wear Characteristics of WC-Co(Cr) and Cr3C2-NiCr Coatings Sprayed by a New Potential HVOF Process

    Vuoristo, P., Nieminen, R., Mäntylä, T. & Barbezat, G., 1996, Proceedings of TS96 Thermal Spraying Conference,. E., L. (ed.). Düsseldorf: DVS-Bericte Band 175, DVS-Verlag, p. 301-305

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  76. Published

    Vechile Positioning Using GPS and Dead-Reckoning Sensors

    Vuoristo, V-P., Konnunaho, T. & Kivikoski, M., 1999, 32nd ISATA, Advances in Automotive and Transportation Technology and Practice for the 21st Century, 14th - 18th June 1999, Vienna, Austria. Roller, D. (ed.). p. 167-174

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  77. Published

    High velocity sprays boost hardmetal industrial coatings

    Vuoristo, P., 2007, In : Metal Powder Report. 62, 3, p. 22-29

    Research output: Contribution to journalArticleScientific

  78. Published

    Termisesti ruiskutetut muovipinnoitteet

    Vuoristo, P., 2000, Tutkimusta ja uusia sovelluksia muovitekniikassa, Keuruu 8.-9.6.2000 Tampereen teknillinen korkeakoulu, Muovitekniikka. p. 23-29

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  79. Published

    Termisen ruiskutuksen lisäaineet

    Vuoristo, P., 2007, In : Hitsaustekniikka. 57, 6, p. 22-28

    Research output: Contribution to journalArticleProfessional

  80. Published

    Effect of strain rate, moisture and temperature on the deformation behavior of of polymer roll covers

    Vuoristo, T. & Kuokkala, V-T., 2004, In : Experimental Mechanics. 44, 3, p. 313-319

    Research output: Contribution to journalArticleScientificpeer-review

  81. Published

    International Conference on Metallurgical Coatings

    Vuoristo, P., 1988, Tampereen teknillinen korkeakoulu. 10 p. (TTKK, Materiaaliopin laitos, Raportti; no. 34/1988)

    Research output: Book/ReportCommissioned reportProfessional

  82. Published

    On the Properties of Detonation Gun Sprayed and Plasma Sprayed Ceramic Coatings

    Vuoristo, P. M. J., Niemi, K. J. & Mäntylä, T. A., 1992, Int. Thermal Spray Conference, Orlando, Florida, USA, May 28 - June 5, 1992. p. 171-176

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  83. Published

    Ruiskutusmetelmän vaikutus WC-12%Co-jauheesta valmistettujen pinnotteiden rakenteeseen ja kulumiskestävyyteen

    Vuoristo, P. & Mäntylä, T., 1995, Tampere: Tampereen teknillinen korkeakoulu. (Tampereen teknillinen korkeakoulu, Materiaaliopin laitos, Raportti; no. 21/1995)

    Research output: Book/ReportCommissioned reportProfessional

  84. Published

    25th Symposium on Engineering Aspects of MHD

    Vuoristo, P., 1987, Tampere: Tampere University of Technology. 9 p. (Tampere University of Technology, Institute of Materials Science, Report; no. 36/1987)

    Research output: Book/ReportCommissioned reportProfessional

  85. Published

    Adhesion and Structure of R.F.-sputtered Magnesiumoxide Coatings on Various Metal Substrates

    Vuoristo, P., Mäntylä, T. & Kettunen, P., 1986, Tampere: Tampere University of Technology. 21 p. (Tampere University of Technology, Institute of Materials Science, Report; no. 29/1986)

    Research output: Book/ReportCommissioned reportProfessional

  86. Published

    Grafiittisten pystyvalusuulakkeiden pinnoittaminen keraamilla

    Vuoristo, P., Mäntylä, T. & Kettunen, P., 1989, Tampere: Tampereen teknillinen korkeakoulu. 29 p. (TTKK/Materiaalioppi, Raportti; no. 28)

    Research output: Book/ReportCommissioned reportProfessional

  87. Published

    Properties of TiC-Ni Based Coatings Deposited by Different HVOF Spraying

    Vuoristo, P., Väisänen, M., Mäntylä, T. & Berger, L-M., 2000, Thermal Spray Surface Engineering via Applied Research, Proceedings of the 1st International Thermal Spray Conference, 8-11 May 2000, Montréal, Québec, Canada. Berndt, C. C. (ed.). AMS International, p. 509-514

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  88. Published

    Adhesion and Structure of Rf-sputtered Magnesium Oxide Coatings on Various Metal Substrates

    Vuoristo, P., Mäntylä, T. & Kettunen, P., 1986, In : Journal of Vacuum Science & Technology A. 4, 6, p. 2932

    Research output: Contribution to journalArticleScientificpeer-review

  89. Published

    The Use of High Power Diode Laser for Cladding and Surface Treatment

    Vuoristo, P., Tuominen, J., Latokartano, J., Hayhurst, P., Vihinen, J., Mäntylä, T. & Andersson, P., 2002, Proceedings "Mechanical Engineering Research New Possibilities by Co-operation", Seminar 3 Jan 2002, Tampere University of Technology. Hakalehto, K. & Mattila, M. (eds.). p. 49-59

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  90. Published

    Tiivisterenkaan pinnoitteet

    Vuoristo, P., Niemi, K. & Mäntylä, T., 1992, Tampereen teknillinen korkeakoulu. 8 p. (Tampereen teknillinen korkeakoulu, Materiaalioppi, Raportti; no. 57/1992)

    Research output: Book/ReportCommissioned reportProfessional

  91. Published

    Ceramic Coatings for MHD Electrodes and Insulators

    Vuoristo, P., Mäntylä, T. & Kettunen, P., 1988, Proc. International Scientific Session on MHD Electrical Power Generation, Tampere, Finland, August 18, 1988. p. 82-84

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  92. Published

    Industrial applications and opportunities of hardmetal coatings

    Vuoristo, P. J., 2006, The EURO PM2006 Congress and Exhibition, 22-23 October, 2006, Ghent, Belgium. p. 10 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  93. Published

    Pinnoitusparametrien ja lisäaineen partikkelikoon vaikutus detonaatioruiskutetun AISI 316L -pinnoitteen rakenteeseen

    Vuoristo, P., Niemi, K., Mäkelä, A. & Mäntylä, T., 1994, Tampere: Tampereen teknillinen korkeakoulu. 15 p. (Tampereen teknillinen korkeakoulu, Materiaaliopin laitos, Raportti; no. 20/1994)

    Research output: Book/ReportCommissioned reportProfessional

  94. Published

    Structure and wear resistance of Cr3C2-NiCr coatings deposited by plasma, detonation and high-velocity oxyfuel spraying

    Vuoristo, P., Niemi, K., Mäkelä, A. & Mäntylä, T., 1994, Proc. of the 7th National Thermal Spray Conference NTSC 94, ASM International Materials Park, OH, USA. Berndt, C. C. & Sampath, S. (eds.). p. 121-126

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  95. Published

    Pinnoitteet ja valmistustekniikat, Metalliset ja keraamiset pinnoitteet

    Vuoristo, P., 1995, Materiaalitekniikka II: Materiaalinvalinta prosessiteollisuuden vaativiin kohteisiin 7.-8.11.1995, AEL Insko. p. 21 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  96. Published

    Properties of magnetron-sputtered electrically insulating Al2O3 coatings on copper

    Vuoristo, P., Mäntylä, T. & Kettunen, P., 1992, In : Journal of Materials Science. 27, p. 4985-4996

    Research output: Contribution to journalArticleScientificpeer-review

  97. Published

    Titaanidioksidijauheiden ominaisuudet ja soveltuminen termiseen ruiskutukseen

    Vuoristo, P., Sorsa, P. & Niemi, K., 1990, Tampere: Tampereen teknillinen korkeakoulu. 19 p. (Tampereen teknillinen korkeakoulu, Materiaaliopin laitos, Raportti; no. 13/1990)

    Research output: Book/ReportCommissioned reportProfessional

  98. Published

    Termiset ruiskutuspinnoitteet

    Vuoristo, P., 2000, Puun käsittelystä massan valmistukseen, 29.-30.11.200 Lahti, Kunnossapitoyhdistys ry.. p. 25 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  99. Published

    Machining of Stainless Steel Screen Plates with PVD Coated HSS Slot Milling Tools- Experimental Results

    Vuoristo, P., Niemi, K. & Mäntylä, T., 1994, Tampere: Tampere University of Technology. 27 p. (Tampere University of Technology, Institute of Materials Science, Report; no. 50/1994)

    Research output: Book/ReportCommissioned reportProfessional

  100. Published

    Muovien terminen ruiskutus

    Vuoristo, P., 2005, Erikoisseminaari, Muovi- ja elastomeeritekniikan kesäseminaari, 9.-10.6.2005, Hotelli Ellivuori, Vammala. p. 7 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

Download list To download, please limit the number of search results to 1,000 or less.