Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. Published

    Water Hydraulic

    Koskinen, K. T. & Vilenius, M., 2011, Handbook of Hydraulic Fluid Technology. Totten, G. E. & De Negri, V. J. (eds.). Boca Raton,FL: CRC Press, p. 723-757

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  2. Published

    Proceedings of the 10th World Congress on Engineering Asset Management (WCEAM 2015)

    Koskinen, K. T. (ed.), Kortelainen, H. (ed.), Aaltonen, J. (ed.), Uusitalo, T. (ed.), Komonen, K. (ed.), Mathew, J. (ed.) & Laitinen, J. (ed.), 25 Mar 2016, Springer International Publishing. 686 p. (Lecture Notes in Mechanical Engineering)

    Research output: Book/ReportAnthologyScientificpeer-review

  3. Published

    On the solution of non-linear diffusion equation

    Kouhia, R., 2013, In : Rakenteiden mekaniikka. 46, 4, p. 116-130 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  4. Published

    Implementation of a direct procedure for critical point computations using preconditioned iterative solvers

    Kouhia, R., Tůma, M., Mäkinen, J., Fedoroff, A. & Marjamäki, H., Oct 2012, In : Computers & Structures. 108-109, p. 110-117 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  5. Published

    Katsaus mikropolaariseen kontinuumimalliin

    Kouhia, R., 2013, In : Rakenteiden mekaniikka. 46, 3, p. 70-90 21 p.

    Research output: Contribution to journalArticleScientificpeer-review

  6. Published

    Betonin ajasta riippumattomat materiaalimallit

    Kouhia, R., 2013, Unknown Publisher. 83 p. (Liikenneviraston tutkimuksia ja selvityksiä; no. 38)

    Research output: Book/ReportCommissioned reportProfessional

  7. Published

    On the numerical solution of a micropolar continuum model

    Kouhia, R. & Niemi, A. H., 2013, Proceedings of the 26th Nordic Seminar on Computational Mechanics, Oslo, 23 - 25 October, 2013. Logg, A., Mardal, K. A. & Massing, A. (eds.). Center for Biomedical Computing, Simula Research Laboratory, p. 128-131 4 p. (Nordic Seminar on Computational Mechanics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  8. Published

    Out-of-plane elastic buckling of truss beams

    Kouhia, R. & Fedoroff, A., 2013, In : Structural Engineering and Mechanics. 45, 5, p. 613-629 17 p.

    Research output: Contribution to journalArticleScientificpeer-review

  9. Published

    Some aspects on efficient solution of creep problems

    Kouhia, R., Marjamäki, P. & Kivilahti, J., 2015, In : Rakenteiden mekaniikka. 48, 4, p. 199-210 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  10. Published

    On optimisation of structures under stability constraints - a simple example

    Kouhia, R., Pajunen, S. & Poutala, J., 9 Dec 2016, In : Rakenteiden mekaniikka. 49, 2, p. 69-77 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  11. Published

    A unified lcf-hcf model based on continuum mechanics

    Kouhia, R., Holopainen, S., Ottosen, N. S., Matti, R. & Saksala, T., 2016. 4 p.

    Research output: Other conference contributionPaper, poster or abstractScientific

  12. Published

    Recognition of Operating States of Mobile Machine

    Krogerus, T., 2011, Proceedings of the 5th GIM Scientific Workshop at Aalto University School of Electrical Engineering 29.-30.11.2011. Espoo: Aalto University, p. 70-80 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  13. Published

    Sensitivity analysis of data analysis process in hydraulic forklift

    Krogerus, T., Rokala, M. & Koskinen, K. T., 2011, Proceedings of the 8th JFPS International Symposium on Fluid Power, Okinawa 2011, October 25-28, 2011, Okinawa, Japan. Okinawa: JFPS international Symposium on Fluid Power, p. 571-578 (International Symposium on Fluid Power JFPS).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  14. Published

    Feature Extraction and Self-Organizing Maps in Condition Monitoring of Hydraulic Systems

    Krogerus, T., 28 Jan 2011, Tampere: Tampere University of Technology. 126 p. (Tampere University of Technology. Publication; vol. 949)

    Research output: Book/ReportDoctoral thesisMonograph

  15. Published

    Applying self-organizing maps to condition monitoring of hydraulic systems

    Krogerus, T., 2010, Proceedings of the 3rd GIM Scientific Workshop, February 17-18, 2010, Aalto University School of Science and Technology. Halme, A. & Pirttioja, T. (eds.). p. 1-10 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  16. Published

    From measurements data to information

    Krogerus, T., 2012, GIM - Generic Intelligent Machines, Proceedings of the 6th GIM Scientific Workshop , November 7-8, 2012, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). Tampere: Tampere University of Technology. Department of Intelligent Hydraulics and Automation, p. 51-62 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  17. Published

    Data analysis process of working hydraulics of small mobile machine

    Krogerus, T., Rokala, M. & Koskinen, K. T., 2012, In : International Journal of Fluid Power. 13, 3, p. 5-15

    Research output: Contribution to journalArticleScientificpeer-review

  18. Published

    Testing of data analysis process in hydraulic forklift

    Krogerus, T. & Koskinen, K. T., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Sairala, H. & Koskinen, K. T. (eds.). Tampere: Scandinavian International Conference on Fluid Power, p. 105-234 130 p. (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  19. Published

    Recognition of Operating States of a Medium-Sized Mobile Machine

    Krogerus, T., Hyvönen, M., Raivio, K. & Huhtala, K., 2013, Proceedings of the 13th Scandinavian International Conference on Fluid Power, 3-5 June, Linköping, Sweden. p. 1-10 10 p. (Scandinavian International Conference on Fluid Power).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  20. Published

    Recognition of Operating States of a Wheel Loader for Diagnostics Purposes

    Krogerus, T., Hyvönen, M. & Huhtala, K., 2013, In : SAE International Journal of Commercial Vehicles. 6, 2, p. 1-7 7 p., 2013-01-2409.

    Research output: Contribution to journalArticleScientificpeer-review

  21. Published

    Anomaly Detection and Diagnostics of a Wheel Loader Using Dynamic Mathematical Model and Joint Probability Distributions

    Krogerus, T., Hyvönen, M., Backas, J. & Huhtala, K., 2015, Proceedings of the Fourteenth Scandinavian International Conference on Fluid Power, SICFP15. May 20-22, 2015. Tampere, Finland. Tampere University of Technology. Department of Intelligent Hydraulics and Automation, 14 p. (The Scandinavian International Conference on Fluid Power).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  22. Published

    A Survey of Analysis, Modeling, and Diagnostics of Diesel Fuel Injection Systems

    Krogerus, T. R., Hyvönen, M. P. & Huhtala, K. J., 2016, In : Journal of Engineering for Gas Turbines and Power: Transactions of the ASME. 138, 8, p. 1 11 p., 081501.

    Research output: Contribution to journalArticleScientificpeer-review

  23. Published

    Analysis of common rail pressure signal of dual-fuel large industrial engine for identification of injection duration of pilot diesel injectors

    Krogerus, T., Hyvönen, M. & Huhtala, K., Mar 2018, In : Fuel. 216, p. 1-9

    Research output: Contribution to journalArticleScientificpeer-review

  24. Published

    Performance of a pump controlled asymmetric actuator: A comparison of different control methods

    Kukkonen, S. & Mäkinen, E., 2014, ASME/BATH 2014 Symposium on Fluid Power and Motion Control, FPMC2014, September 10-12, 2014, Bath, United Kingdom. The American Society of Mechanical Engineers ASME, p. 1-10 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  25. Published

    Hydraulics for High Inertia, Heavy Load Lifting Application - Comparing Different Options

    Kukkonen, S. & Mäkinen, E., 2013, The 8th International Conference on Fluid Power Transmission and Control, ICFP 2013, April 9-11, 2013, Zhejiang University, Hangzhou, China. Yongxiang, L., Qingfeng, W., Bingfeng, J. & Jun, Z. (eds.). p. 176-180 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  26. Published

    A low resolution digital hydraulic control application

    Kukkonen, S. & Mäkinen, E., 2012, Proceedings of the 13th Mechatronics Forum International Conference, September 17-19, 2012, Johannes Kepler University Linz, Austria, Advances in Mechatronics. Scheidl, R. & Jakoby, B. (eds.). Linz: TRAUNER VERLAG, p. 8 p (Mechatronics Forum; vol. 1/3).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  27. Published

    Scanner test pattern for evaluation of beam manipulation accuracy

    Kumpulainen, T., Latokartano, J., Vihinen, J. & Tuokko, R., 2011, IEEE International Symposium on Assembly and Manufacturing, ISAM 2011, 25-27 May, 2011, Tampere Hall, Tampere, Finland. Piscataway, NJ: IEEE, p. 1-6 6 p. (IEEE International Symposium on Assembly and Manufacturing ISAM).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  28. Published

    Low temperature nanoparticle sintering with continuous wave and pulse lasers

    Kumpulainen, T., Pekkanen, J., Valkama, J., Laakso, J., Tuokko, R. & Mäntysalo, M., 2011, In : Optics and laser technology. 43, 3, p. 570-576

    Research output: Contribution to journalArticleScientificpeer-review

  29. Published

    Surface Processing of Zirconia Ceramics by Laser

    Kumpulainen, T., Ismailov, A., Hyvärinen, L., Levänen, E. & Vihinen, J., 2014, Proceedings of the Twenty Eighth International Conference on Surface Modification Technologies. p. 275-284 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  30. Published

    Novel approach on application manufacturing using inkjet printing, laser ablation and new polymer substrate

    Kunnari, E., Karttunen, M., Kumpulainen, T., Kortet, S., Laine-Ma, T., Mäntysalo, M., Smalen, M. & Ruuskanen, P., 2010, ICEP2010. International Conference on Electronics Packaging, May 12-14, 2010, Hokkaido, Japan. p. 249-254

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  31. Published

    Experimental Investigation of the Internal Heating of Metals in a Wide Range of Strain Rates Using Simultaneous Digital Image Correlation and High Speed Infrared Imaging

    Kuokkala, V-T., Smith, J., Seidt, J. & Gilat, A., 2016.

    Research output: Other conference contributionPaper, poster or abstractScientific

  32. Published

    Puhtaus on puoli hydrauliikkaa

    Kuosku, M. & Rinkinen, J., 2013, In : Promaint. 27, 5, p. 34-36 3 p.

    Research output: Contribution to journalArticleProfessional

  33. Published

    Examples of technical cleanliness of fluid power components

    Kuosku, M., Pekkonen, J. & Rinkinen, J., 2013, The Tenth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, CM2013/MFPT2013, 18-20 June 2013, Krakow, Poland. Coxmoor Publishing, p. 1-12 12 p. (International Conference on Condition Monitoring and Machinery Failure Prevention Technologies).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  34. Published

    Hiukkasen puhtaammaksi -laboratorio hydraulikomponenttien puhtaustutkimuksiin

    Kuosku, M. & Rinkinen, J., 2011, In : Promaint. 25, 5, p. 42-45

    Research output: Contribution to journalArticleProfessional

  35. Published

    Mittaustuloksia kaupallisilla puhtaustestikaapeilla

    Kuosku, M., Pekkonen, J. & Rinkinen, J., 2012, KompuNW -verkostoseminaari TTY:ssa 9.10.2012. Tampere: Tampere University of Technology, IHA - Department of Intelligent Hydraulics and Automation, p. 1-15 15 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  36. Published

    Effect of the Immersion Level of a Virtual Loader Simulator on the Sense of Presence

    Kuusisto, J., Ellman, A., Kaapu, T. & Tiainen, T., 2011, ASME 2011 World Conference on Innovative Virtual Reality WINVR2011, June 27-29, 2011, Milan, Italy. New York, NY: ASME, (ASME World Conference on Innovative Virtual RealityWINVR).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  37. Published

    Developing VIP2M: A Virtual Environment for Prototyping Mobile Work Machines

    Kuusisto, J., Kaapu, T., Ellman, A. & Tiainen, T., 2012, Proceedings of the 12th International Design Conference, DESIGN 2012, 21-24 May, 2012, Dubrovnik, Croatia. Marjanovic, D., Storga, M., Pavkovic, N. & Bojcetic, N. (eds.). Zagreb: Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, The Design Society, Glasgow, p. 657-666 (International Design Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  38. Published

    A device configuration management tool for context-aware system

    Kuutti, A., Dvoryanchikova, A., Lobov, A., Martinez Lastra, J. L. & Vahtera, T., 2012, Proceedings of IEEE 10th International Conference on Industrial Informatics, INDIN 2012, 25-27 July, 2012, Beijing, China. Piscataway: Institute of Electrical and Electronics Engineers IEEE, p. 10-15 (IEEE International Conference on Industrial Informatics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  39. Published

    Pyörät ja pyssyt

    Kylliäinen, M., Partanen, S., Ojanen, O. J., Tikander, V., Katjamäki, T., Kortti, J., Piltz, M., Lempinen, O., Lehtonen, T., Lehtomäki, K. & Lilja, E., 2013, Kahdella pyörällä. Kirsi, L. (ed.). 246: Mobilia säätiö, p. 71-77

    Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

  40. Published

    Regenerative Hydraulic Hybrid with Digi-valve and Multi-chamber Cylinder Technology

    Laamanen, A., 2014, Tampere: FIMECC Oy. 5 p. (FIMECC Publications Series. Energy and Life-cycle Cost Efficient Machines; no. 2/2014)

    Research output: Book/ReportCommissioned reportProfessional

  41. Published

    Proceedings of the fifth workshop on digital fluid power, October 24-25, 2012, Tampere, Finland

    Laamanen, A. (ed.) & Linjama, M. (ed.), 2012, Tampere: Tampere University of Technology. Department of Intellidgent Hydraulics and Automation.

    Research output: Book/ReportAnthologyScientificpeer-review

  42. Published

    Proceedings of the Third Workshop on Digital Fluid Power, October 13-14 2010, Tampere, Finland

    Laamanen, A. (ed.) & Linjama, M. (ed.), 2010, Tampere: Tampere University of Technology.

    Research output: Book/ReportAnthologyScientificpeer-review

  43. Published

    Digital flow control unit for controlling amount of water used for binding dust

    Laamanen, A., Anttonen, P. & Linjama, M., 2010, Proceedings of the Third Workshop on Digital Fluid Power, October 13-14 2010, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). p. 119-128

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  44. Published

    Digital Microhydraulics

    Laamanen, A. & Linjama, M., 2014, Tampere: FIMECC Oy. 4 p. (FIMECC Publications Series; no. 2)

    Research output: Book/ReportCommissioned reportProfessional

  45. Published

    The Fourteenth Scandinavian International Conference on Fluid Power, SICFP15: Proceedings

    Laamanen, A. (ed.) & Huhtala, K. (ed.), 2015, Tampere University of Technology. Department of Intelligent Hydraulics and Automation. 835 p. (Scandinavian International Conference on Fluid Power (SICFP))

    Research output: Book/ReportAnthologyScientificpeer-review

  46. Published

    Landowners’ willingness to promote bioenergy production on wasteland − future impact on land use of cutaway peatlands

    Laasasenaho, K., Lensu, A., Rintala, J. & Lauhanen, R., 1 Dec 2017, In : Land Use Policy. 69, p. 167-175 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  47. Published

    Characteristics of digital hydraulic pressure reducing valve

    Lähteenmäki, T., Ijas, M. & Mäkinen, E., 2010, Fluid Power and Motion Control (FPMC 2010), 15-17 September 2010, University of Bath, UK. Johnston, D. N. & Plummer, A. R. (eds.). p. 69-82

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  48. Published

    DFMA Implementation in high variability product context

    Lahtinen, T., Berkovits, J. & Riitahuhta, A., 2012, Proceedings of the 9th International Symposium on Tools and Methods of Competitive Engineering, TMCE 2012, 7-11 May, 2012, Karlsruhe, Germany. Imre, H., Zoltan, R., Albert, A. & Mathias, B. (eds.). Delft, Netherlands: Delft University of Technology, p. 915-926 (International Symposium on Tools and Methods of Competitive Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  49. Published

    Extrusion-coated sealing layers on ALD-Al2O3 coated polymer substrate: Interfacial and Adhesion properties

    Lahtinen, K., Johansson, P., Kääriäinen, T., Cameron, D. C. & Kuusipalo, J., 2012, TAPPI PLACE Conference 2012: Helping Me Do My Job Better, 6-9 May 2012, Seattle, WA, United States. p. 543-562 20 p. (TAPPI European PLACE Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  50. Published

    Study of Adhesion Force between Cellulose Micro-sphere and Cellulose Membrane

    Lai, Y., Zhang, H., Xie, H., Sugano, Y., Bobacka, J. & Kallio, P., Jul 2016, Proceedings of the Sixth International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO). IEEE, p. 125-129 5 p. 1600631

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  51. Published

    Analysis of the aircraft operational reliability research series: From statistical models to avionics data monitoring

    Laitinen, J. & Niemi, A., 2015, Proceedings of the 9th World congress on engineering asset management (WCEAM 2014), Pretoria, South Africa 28-31 Oct, 2014. 15 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  52. Published

    Modeling of closed spare part circulation for better availability of aircraft

    Laitinen, J. & Hagmark, P-E., 2010, Proceedings of the 4th Asia-Pacific International Symposium on Advanced Reliability and Maintenance Modeling APARM 2010, Wellington, New Zealand, 2 - 4 December, 2010. Chukova, S., Haywood, J. & Dohi, T. (eds.). p. 409-416

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  53. Published

    Method to determine internal leakage of aircraft's hydraulic servo

    Laitinen, J. & Koskinen, K., 2018, 12th World Congress on Engineering Asset Management & 13th International Conference on Vibration Engineering and Technology of Machinery: (WCEAM 2017) 2-4, August 2017, Brisbane, Australia.. Mathew, J., Lim, C. W., Ma, L., Sands, D., Cholette, M. E. & Borghesani, P. (eds.). Springer, p. 343-349 7 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  54. Published

    The influence of FMS-technology on the efficiency of NC-controlled machine tools

    Lakso, T., 1988, Tampere: Tampere University of Technology. 106 p. (Tampereen teknillinen korkeakoulu. Julkaisuja; vol. 50)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  55. Published

    Full-Dynamics-Based Bilateral Teleoperation of Hydraulic Robotic Manipulators

    Lampinen, S., Koivumäki, J. & Mattila, J., Aug 2018, 2018 IEEE 14th International Conference on Automation Science and Engineering (CASE). IEEE, p. 1343-1350 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  56. Published

    Model-based control of a pressure-compensated directional valve with significant dead-zone

    Lampinen, S., Koivumäki, J., Mattila, J. & Jouni, N., 7 Oct 2019, ASME/BATH 2019 Symposium on Fluid Power and Motion Control: October 7–9, 2019 Longboat Key, Florida, USA . ASME

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  57. Published

    A new method to calculate natural convection heat transfer from a non-isothermal fin array

    Lampio, K. & Karvinen, R., 2015, Proceedings of the 7th Baltic Heat Transfer Conference, August 24-26 2015, Tallinn Estonia. Neshumayev, D. & Sunden, B. (eds.). Tallinn: Tallinn University of Technology, (Baltic Heat Transfer Conference BHTC).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  58. Published

    Multi-objective optimization of electronics heat sinks cooled by natural convection

    Lampio, K. & Karvinen, R., Sep 2016, In : Journal of Physics: Conference Series. 745, 3, 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  59. Published

    Multi-Objective Optimization of Fin Array Heat Sinks

    Lampio, K. & Karvinen, R., 21 Nov 2016, Therminic 2016: 22nd international workshop Thermal investigations of ICs and Systems. IEEE, 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  60. Published

    Optimization of convectively cooled heat sinks

    Lampio, K. & Karvinen, R., 2017, In : Microelectronics Reliability. 79, p. 473-479

    Research output: Contribution to journalArticleScientificpeer-review

  61. Published

    A new method to optimize natural convection heat sinks

    Lampio, K. & Karvinen, R., Aug 2018, In : Heat and Mass Transfer/Waerme- und Stoffuebertragung. 54, 8, p. 2571-2580

    Research output: Contribution to journalArticleScientificpeer-review

  62. Published

    Social Media in Manufacturing: Just Hype or Concrete Benefits?

    Lanz, M. & Torvinen, S., 2013, 23rd International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 13, The challenge of sustaining global competitive manufacturing system, 26-28 June 2013 Porto Portugal, Advances in Sustainable and Competitive Manufacturing Systems. Azevedo, A. (ed.). Switzerland: Springer International Publishing, p. 1023-1034 (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  63. Published

    Sustainability and Performance Indicators Landscape

    Lanz, M., Järvenpää, E., Nylund, H., Tuokko, R., Torvinen, S. & Georgoulias, K., 2014, Proceedings of the 24th International Conference on Flexible Automation and Intelligent Manufacturing, FAIM2014, 20th -23rd May, San Antonio, Texas, USA. Chen, F. F. (ed.). Lancaster, Pennsylvia: DEStech Publications, p. 283-290 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  64. Published

    Feature recognition as a basis for the cost allocation and decision making toolset

    Lanz, M., Luostarinen, P., Garcia, F. & Andersson, P. H., 2009, Proceedings of the 20th International Conference on Production Research, ICPR'2009, August 2009, Shanghai, China. p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  65. Published

    Engineering intelligence - Product-service concepts and requirements in industry

    Lanz, M., Nykänen, O., Aaltonen, J., Ranta, P. A., Koskinen, K. T. & Andersson, P. H., 2013, 2013 IEEE International Symposium on Assembly and Manufacturing (ISAM), July 30th – Aug 2nd 2013, Xi’an, China. Piscataway: Institute of Electrical and Electronics Engineers IEEE, p. 138-141 4 p. (International Symposium on Assembly and Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  66. Published

    Information flows in future advanced manufacturing ecosystems

    Lanz, M., Majuri, M. & Tuokko, R., 2013, IFIP WG 5.7 International conference, APMS 2013, State College, PA, USA, September 9-12, 2013, Advances in Production Management Systems. Sustainable Production and Service Supply Chains. Prabhu, V., Taisch, M. & Kiritsis, D. (eds.). Springer Berlin Heidelberg, p. 70-77 8 p. (IFIP Advances in Information and Communication Technology; vol. 414).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  67. Published

    Information Flows and Design Intent in the Core of Future Product-Services in the Field of Manufacturing Industry

    Lanz, M., Järvenpää, E. & Andersson, P., 2013, 5th International conference on advanced design and manufacture, 25-28 September 2013, Valencia, Spain. Su, D. & Zhu, S. (eds.). Trans Tech Publications, p. 103-106 4 p. (Key Engineering Materials; vol. 572).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  68. Published

    Neutral interface for assembly and manufacturing related knowledge exchange in heterogeneous design environment

    Lanz, M., Rodriguez, R., Luostarinen, P. & Tuokko, R., 2010, Precision assembly technologies and systems, proceedings of 5th International Precision Assembly Seminar, IPAS 2010, 14-17 February 2010, Chamonix, France. Ratchev, S. (ed.). Springer, p. 21-29

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  69. Published

    Logical and semantic foundations of knowledge representation for assembly and manufacturing processes

    Lanz, M., 6 Jul 2010, Tampere: Tampere University of Technology. 138 p. (Tampere University of Technology. Publication; vol. 903)

    Research output: Book/ReportDoctoral thesisMonograph

  70. Published

    Towards intelligent assembly and manufacturing environment - Modular ICT support for holonic manufacturing system

    Lanz, M., Järvenpää, E., Luostarinen, P., Garcia, F. & Tuokko, R., 2012, Precision assembly technologies and systems. Proceedings of the 6th IFIP WG 5.5 International precision assembly seminar, IPAS 2012, 12-14 February, 2012, Chamonix, France. Svetan, R. (ed.). Springer, p. 154-162 (IFIP Advances in Information and Communication Technology; vol. 371).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  71. Published

    Towards adaptive manufacturing systems - knowledge and knowledge management systems

    Lanz, M., Järvenpää, E., Garcia, F., Luostarinen, P. & Tuokko, R., 2012, Manufacturing systems. Faieza, A. A. (ed.). Rijeka, Croatia: InTech, p. 141-158

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  72. Published

    Set-up and first steps on capturing of realistic resource characteristics of an intelligent manufacturing environment

    Lanz, M., Nylund, H., Ranta, A., Luostarinen, P. & Tuokko, R., 2010, Proceedings of the 20th International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2010, July 12-14, 2010, California State University East Bay, USA. p. 1028-1036

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  73. Published

    Formalising connections between products, processes and resources - towards semantic knowledge management system

    Lanz, M., Järvenpää, E., Luostarinen, P., Tenhunen, A., Tuokko, R. & Rodriguez, R., 2011, Proceedings of the 4th International Swedish Production Symposium, SPS11 3-5 May, 2011, Lund, Sweden. Ståhl, J-E. (ed.). Lund: The Swedish Production Academy, p. 425-431 (International Swedish Production Symposium SPS).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  74. Published

    Logical and semantical foundations for knowledge representation for assembly and manufacturing processes

    Lanz, M. & Tuokko, R., 2010, Proceeding of Post-Graduate Workshop on Intelligent Machines and Transport Systems, 3-7 May 2010, CERN, Switzerland. p. 98-109 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  75. Published

    Impact of energy measurements in machining operations

    Lanz, M., Mani, M., Leong, S., Lyons, K., Ranta, A., Ikkala, K. & Bengtsson, N., 2010, Proceeding of the ASME 2010 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2010, August 15-18, 2010, Montreal, Quebec, Canada. p. 7 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  76. Published

    Lean, scalable and extendable ICT concept in a dynamically changing environment

    Lanz, M. & Tuokko, R., 2013, Proceedings of the PDM2013 conference, The 1st PDM Forum for Finland-Russia Collaboration, 24.-25.4.2013, Lappeenranta. Huhtala, M. & Eskelinen, H. (eds.). Lappeenranta: Lappeenranta University of Technology, p. 61-68 8 p. (LUT Scientific and Expertise Publication. Tutkimusraportit; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  77. Published

    Concepts, methods and tools for individualized production

    Lanz, M. & Tuokko, R., 1 Apr 2017, In : PRODUCTION ENGINEERING. 11, 2, p. 205-212 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  78. Published

    Robotiikan turvallisuus ja standardit

    Lanz, M. & Järvenpää, E., Apr 2018, In : Automaatioväylä. 2, p. 29

    Research output: Contribution to journalArticleProfessional

  79. Published

    Robottien tulevaisuus: seuralaisia ja uusia ideoita

    Lanz, M. & Järvenpää, E., Apr 2018, In : Automaatioväylä. 2, p. 30

    Research output: Contribution to journalArticleProfessional

  80. Published

    A concept and local implementation for industry-academy collaboration and life-long learning

    Lanz, M., Lobov, A., Katajisto, K. & Mäkelä, P., 23 Apr 2018, In : Procedia Manufacturing. 23, p. 189-194 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  81. Published

    Ideal Factory - Theory of factory planning, produceability and ideality

    Lapinleimu, I., 2001, Tampere: Tampere University of Technology. (Tampereen teknillinen korkeakoulu. Julkaisuja; vol. 328)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  82. Published

    URB-Grade: Plataforma software para la ayuda a la toma de decisiones correctoras de eficiencia energetica

    Larranaga Negro, M., Martinez Lastra, J. L., Colino, A. & Marquez Contreras, J. A., 2013, III Congreso de servicios energeticos, ESES comunicaciones, Bilbao, 1 y 2 octubre 2013, Palacio Euskalduna. Editorial tecnica el instaldor, p. 291-296 6 p. (Congreso de servicios energeticos).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  83. Published

    Robomestarit: TV2 Lasten ja nuorten robotiikka gameshow

    Latokartano, J., 2018

    Research output: Artistic and non-textual formDigital or Visual ProductsScientific

  84. Published

    Predicting operator's cognitive and motion skills from joystick inputs

    Laurikkala, M., Suzuki, S. & Vilkko, M., 22 Dec 2016, IECON 2016 - 42nd Annual Conference of the IEEE Industrial Electronics Society. IEEE, p. 5935-5940 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  85. Published

    Visualization of Information in a Service-Oriented Production Control System

    Lee, N. A. N., Moctezuma, L. E. G. & Lastra, J. L. M., 2013, 39th Annual Conference of the IEEE Industrial Electronics Society, IECON 2013, 10-13 November, 2013, Vienna, Austria. Piscataway, NJ: IEEE, p. 4422-4428 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  86. Published

    A perfect fit

    Lehtinen, J., Pajunen, S. & Heinonen, O., 2013, In : Ansys Advantage. 7, 2, p. 26-29 4 p.

    Research output: Contribution to journalArticleProfessional

  87. Published

    Analytical solution for a class of flat plate conjugate convective heat transfer problems

    Lehtinen, A. & Karvinen, R., 2011, In : Frontiers in Heat and Mass Transfer. 2, p. 1-6 6 p., 043004.

    Research output: Contribution to journalArticleScientificpeer-review

  88. Published

    Factors affecting to exploitation of modularity

    Lehtinen, J., Lehtonen, T., Juuti, T. & Riitahuhta, A., 2012, Proceedings of The Ninth Norddesign Conference 2012, 22-24 August, 2012, Aalborg, Denmark. Poul, K. H. J. R., Kaj, J. & Christian, T. (eds.). Aalborg, Denmark: Aalborg university, p. 1-10 10 p. (Norddesign conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  89. Published

    Product strategies in merchant ship and airliner industries

    Lehtinen, J., Lehtonen, T., Pakkanen, J. & Riitahuhta, A., 2013, Proceedings of the 19th International Conference on Engineering Design, ICED 13, Design for Harmonies, Vol 3: Design Organisation and Management, 19th-22nd August 2013, Sungkyunkwan University, Seoul, Korea. Lindemann, U., Venkataraman, S., Kim, Y. S., Lee, S. W., de Weck, O. & Hong, Y. S. (eds.). Scotland: The Design Society, p. 201-210 10 p. (International Conference on Engineering Design).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  90. Published

    Brownfield process for developing of product families

    Lehtonen, T., Pakkanen, J., Järvenpää, J., Lanz, M. & Tuokko, R., 2011, Proceedings of the 18th International Conference on Engineering Design, ICED 11, 15-18 August, 2011, Technical University of Denmark, Copenhagen, Denmark. Culley, S. J., Hicks, B. J., McAloone, T. C., Howard, T. J. & Clarkson, J. (eds.). Glasgow: The Design Society, p. 248-257 (International Conference on Engineering Design ICED; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  91. Published

    Achieving integrated product and production development with knowledge creation and flow model

    Lehtonen, T., Pakkanen, J., Juuti, T., Vanhatalo, M. & Becker, I., 2012, The 22nd International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2012, 10-13 June, 2012, Helsinki, Finland. Hasse, N., Satu, K., Ville, T. & Seppo, T. (eds.). Tampere: Tampere University of Technology. Department of Production Engineering, p. 357-364 (International Conference on Flexible Automation and Intelligent Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  92. Published

    Elävien kuvien linja-auto

    Lehtonen, T., 2010, Peltitähdet - Auto elokuvissa. Levä, K. (ed.). Kerava: Mobilia säätiö, p. 83-94

    Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

  93. Published

    Linja-autoliikennöitsijät ja tavaralinjaliikenne

    Lehtonen, T., 2011, Yölinjalla. Levä, K. (ed.). Mobilia, p. 58-65

    Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

  94. Published

    Retrospective study on teaching engineering design and product development

    Lehtonen, T., Juuti, T., Rättyä, K. & Vanhatalo, M., 2013, E&PDE 2013, the 15th international conference on engineering and product design education, Design education - Growing our future, Dublin, Ireland, 5-6 September, 2013. Bohemia, E., Ion, W., Kovacevic, A., Lawlor, J., McGrath, M., McMahon, C., Parkinson, B., Reilly, G., Ring, M., Simpson, R. & Tormey, D. (eds.). Glasgow: The Design Society, Institution of Engineering Designers, p. 414-419 6 p. (International Conference on Engineering and Product Design Education).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  95. Published

    A Framework for developing viable design methodologies for industry

    Lehtonen, T., Juuti, T., Oja, H., Suistoranta, S., Pulkkinen, A. & Riitahuhta, A., 2011, Proceedings of the 18th International Conference on Engineering Design, ICED 11, 15-18 August, 2011, Technical University of Denmark, Copenhagen, Denmark. Culley, S. J., Hicks, B. J., McAloone, T. C., Howard, T. J. & Clarkson, J. (eds.). Glasgow: The Design Society, p. 405-416 (International Conference on Engineering Design ICED; vol. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  96. Published

    Keskipakopumppujen mitoituksen ja käytön haasteet

    Lehtonen, E. & Rinkinen, J., 2015, In : Promaint. 29, 4, p. 37-39 3 p.

    Research output: Contribution to journalArticleProfessional

  97. Published

    Challenges and opportunities in capturing design knowledge

    Lehtonen, T., Halonen, N., Pakkanen, J., Juuti, T. & Huhtala, P., 2016, Proceedings of the 10th World Congress on Engineering Asset Management (WCEAM 2015). Springer International Publishing, p. 389-395 8 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  98. Published

    Leadership instead of grading - The new goals of assessment

    Lehtonen, T., Juuti, T., Vanhatalo, M., Kopra, M. J. & Rättyä, K., 2016, 44th Annual Conference of the European Society for Engineering Education - Engineering Education on Top of the World: Industry-University Cooperation, SEFI 2016. European Society for Engineering Education SEFI, 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  99. Published

    Suomen linja-autot - koriteollisuus 2000-luvulla

    Lehtonen, T., 2017, Kustantaja Laaksonen. 192 p.

    Research output: Book/ReportBookProfessional

  100. Published

    Suomalaiset ambulanssit

    Lehtonen, T., 2017, Suomi turvassa 100 vuotta. Mobilia säätiö, p. 36-45 10 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

Previous 12 3 4 5 6 7 8 9 ...13 Next
Download list To download, please limit the number of search results to 1,000 or less.