Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. Published

    Ohjauksen ja säädön ero liikkeen toteutuksessa

    Virvalo, T. & Mäkinen, E., 2003, In : Hydrauliikka ja pneumatiikka asemaservon toteutuksessa, osa II. Hydraulisen asemaservon suunnittelu, Fluid Finland- lehti. 2, 1, p. 20-27

    Research output: Contribution to journalArticleScientificpeer-review

  2. Published

    Comparing different controllers of electropneumatic position servo

    Virvalo, T., 1996, Proceedings of the Third JHPS International Symposium on Fluid Power, Yokohama'96, 4-6 November 1996. Araki, K. (ed.). Tokyo, p. 151-156

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  3. Published

    Servo pneumatics versus on/off pneumatics-performance and energy consumption

    Virvalo, T. & Mäkinen, E., 2003, Proceedings of the 18th International Conference on Hydraulics and Pneumatics, Praha, 30.9-1.10.2003. Tiskárna DOT Domu techniky Ostrava, spol. s r.o.: Czech Mechanical Engineering Society in cooperation with VSB-Technical University of Ostrava, Faculty of Mechanical Engineering, Department of Control System and Instrumentation, p. 58-67

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  4. Published

    The use of linear model in design of electropneumatic servo system.

    Virvalo, T., 1991, 2nd International Conference on Fluid Power, Tampere Finland, 19-21 March 1991. p. 177-184

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  5. Published

    Distributed motion control

    Virvalo, T. & Puusaari, P., 1990, ISRAM '90, Canada, 18-20 July 1990. p. 6 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  6. Published

    Comparing different control strategies of timber sawing process

    Virvalo, T. & Inberg, J., 2005, Bath Workshop on Power Transmission and Motion Control (PTMC 2005), 7-9 September 2005. Johnston, D. N., Burrows, C. R. & Edge, K. A. (eds.). p. 59-74

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  7. Published

    The use of the linear model in the design of the pneumatic position servo

    Virvalo, T., 1989, In : Hydraulic Pneumatic Mechanical Power. June

    Research output: Contribution to journalArticleProfessional

  8. Published

    Can bus applied on hydraulic computed force control?

    Virvalo, T., Lammila, M. & Lehto, E., 2003, International Conference on Mechatronics, ICOM 2003. London and Bury St Edmunds, UK: Professional Engineering Publishing Limited, p. 215-221

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  9. Published

    Modelling and Design of a Pneumatic Position Servo System Realized with Commercial Components

    Virvalo, T., 1995, Tampere: Tampere University of Technology. (Tampereen teknillinen korkeakoulu. Julkaisuja; no. 171)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  10. Published

    CAN bus applied on hydraulic computed force control

    Virvalo, T., Lammila, M. & Lehto, E., 2004, In : Transactions of the Institute of Measurement and Control. 26, 5, p. 373-391

    Research output: Contribution to journalArticleScientificpeer-review

  11. Published

    Distributed control of a hydraulic actuator system

    Virvalo, T. & Puusaari, P., 1991, 2nd International Conference on Fluid Power, Tampere Finland, 19-21 March. p. 549-558

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  12. Published

    Follow-up accurary of water hydraulic swing

    Virvalo, T. & Mattila, J., 2007, Proceedings of the Fifth International Symposium on Fluid Power Transmission and Control, ISFP 2007, June 6-8, 2007, Beidaihe, China. China, p. 5 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  13. Published

    Liikeohjaus hydrauliikassa ja pneumatiikassa

    Virvalo, T. & Puusaari, P., 1990, In : Konepajamies. No 3, p. 64-66

    Research output: Contribution to journalArticleProfessional

  14. Published

    Follow-up accurary of a force control water hydraulic cylinder drive

    Virvalo, T. & Mäkinen, E., 2000, Proceedings. Sixth Triennal International Symposium on Fluid Control, Measurement and Visualization, FLUCOME 2000, August 13-17, 2000, Sherbrooke, Canada. Laneville, A. (ed.). p. 5 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  15. Published

    PI and PID-controllers in a Hydraulic Position Servo System- What it is all about

    Virvalo, T., 2001, In: Lu, Y., Chen, Y. & Xu, L. Proceedings of the Fifth International Conference on Fluid Power Transmission and Control (ICFP´2001) April 3-5, 2001, Hangzhou, China. Kiina, p. 130-134

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  16. Published

    Fuzzy Logic Forward Compensation for Synchronizing Hydraulic Cylinders

    Virvalo, T., 1996, Soft computing with industrial applications. Vol. 5. Proceedings of the world automation congress (WAC '96), May 28-30, 1996, Montpellier, France. Jamshidi, M. (ed.). USA, p. 653-658

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  17. Published

    The use of a microcontroller in electrohydraulic position servo system

    Virvalo, T., 1991, 2nd International Conference on Fluid Power, Tampere Finland, 19-21 March 1991. p. 377-383

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  18. Published

    Pneumatiikalla pitkä historia

    Virvalo, T. & Mäkinen, E., 2003, In : Fluid Finland. 2, 3, p. 8-10

    Research output: Contribution to journalArticleProfessional

  19. Published

    Control of the independent intelligent actuator

    Virvalo, T. & Puusaari, P., 1989, Fluid Power Transmission and Control, Proceedings of the 2nd International Conference. Kiina, p. 241-246

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  20. Published

    Vesihydraulisen asemaservon suunnittelu

    Virvalo, T. & Mäkinen, E., 2003, In : Fluid Finland. 2, 2, p. 24-31

    Research output: Contribution to journalArticleScientificpeer-review

  21. Published

    Comparing Controllers in Pneumatic Motion Control

    Virvalo, T., 2003, In: Zhuangyun, L. et al. (Eds. ). Proceedings of the Fourth International Symposium on Fluid Power Transmission and Control, ISFP'2003, April 8-10, 2003, Wuhan, China. Chaonei Dajie, Beijing: International Academic Publishers/World Publishing Corporation, p. 284-289

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  22. Published

    Force Control of a Hydraulic Cylinder Drive

    Virvalo, T., Mäkinen, E. & Vilenius, M., 1999, Proceedings of The Sixth Scandinavian International Conference on Fluid Power, May 26 - 28, 1999, Tampere, Finland. Koskinen, K. T., Vilenius, M. & Tikka, K. (eds.). Tampere, p. 271-284

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  23. Published

    Fuzzy logic controller for hydraulic drives

    Virvalo, T. & Koskinen, H., 1992, 10th Aachen Colloquium on Fluid Power Technology, Aachen, 17-19 March 1992. p. 12 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  24. Published

    Säätötekniikan perusteita

    Virvalo, T., 1990, Täydennyskoulutuskurssi "Itsenäiset toimilaitteet - Helpotusta vaativaan koneenrakennukseen" 25.-26.10.1990. p. 72 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  25. Published

    The influence of the supply line on the performance of a pneumatic position servo system

    Virvalo, T. & Mäkinen, E., 1999, Fluid Power. Proceedings of the Fourth JHPS International Symposium on Fluid Power, Tokyo, 15-17 November 1999. Yokota, S. (ed.). p. 149-154

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  26. Published

    On the efficiency of hydraulic booms and manipulators

    Virvalo, T. & Vilenius, M., 1998, In: Stecki, J. & Garbacik, A. Developments in Fluid Power Control of Machinery and Manipulators, International Scientific Forum extended abstracts of the proceedings, Cracow, Poland 25-28 June 1998. p. 63-65

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  27. Published

    Dimensioning and selecting pressure supply line equipment for a pneumatic position servo

    Virvalo, T. & Mäkinen, E., 2000, Proceedings. Sixth Triennal International Symposium on Fluid Control, Measurement and Visualization, FLUCOME 2000, August 13-17, 2000, Sherbrooke, Canada. Laneville, A. (ed.). p. 6 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  28. Published

    Distributed motion control in hydraulics and pneumatics

    Virvalo, T., 1992, In : Mechatronics. 2, 3, p. 277-288

    Research output: Contribution to journalArticleScientificpeer-review

  29. Published

    Computed force control versus state control in hydraulic motion control

    Virvalo, T., 2003, The Eight Scandinavian International Conference on Fluid Power, Proceedings of the Conference, May 7-9, 2003, Tampere, Finland, SICFP´03. Koskinen, K. T. & Vilenius, M. (eds.). Tampere: Tampere University of Technology, p. s. 11731185

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  30. Published

    The design of pneumatic position servo

    Virvalo, T., 1990, Pneu-Hidro '90, Miskolc Hungary, 28-30 August 1990. p. 10 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  31. Published

    On the damping of water hydraulic cylinder drives

    Virvalo, T., Mäkinen, E. & Vilenius, M., 1999, Fluid Power. Proceedings of the Fourth JHPS International Symposium on Fluid Power, Tokyo, 15-17 November 1999. Yokota, S. (ed.). p. 351-356

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  32. Published

    CAN bus inside hydraulic position tracking control

    Virvalo, T. & Lehto, E., 2007, Proceedings of 2nd International Forum on Systems and Mechatronics, IFSM 2007, December 3-6, 2007, NCKU, Tainan, Taiwan. Shih, M-C. (ed.). Taiwan: Tsang Hai Book Publishing Co., p. 7-12

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  33. Published

    Comparing pressure control methods

    Virvalo, T., 2003, In: Zhuangyun, L. et al. (Eds. ). Proceedings of the Fourth International Symposium on Fluid Power Transmission and Control, ISFP'2003, April 8-10, 2003, Wuhan, China. Chaonei Dajie, Beijing: International Academic Publishers/World Publishing Corporation, p. 25-30

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  34. Published

    Open loop control in positioning with proportional valves in hydraulics

    Virvalo, T., 1991, ISFP '91, Beijing China. p. 6 s.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  35. Published

    Some steps in development of modern water hydraulics

    Virvalo, T. & Vilenius, M., 1999, Proceedings of the 3rd International Symposium on Fluid Power Transmission and Control (ISFP'99), September 7-9, 1999, Harbin, China. p. 36 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  36. Published

    Feed force based constant torque control of hydraulic motor in chainsaw application

    Virvalo, T. & Inberg, J., 2004, Bath Workshop on Power Transmission and Motion Control (PTMC 2004). p. 173-186

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  37. Published

    La logica fuzzy in oleoidraulica e pneumatica

    Virvalo, T. & Niemelä, E., 1994, In : Oleadinamica- pneumatica. 3 marzo, p. 187-191

    Research output: Contribution to journalArticleScientificpeer-review

  38. Published

    Sumea säätö asemaservossa

    Virvalo, T., 1992, In : Konepajamies. 10, p. 8 s

    Research output: Contribution to journalArticleProfessional

  39. Published

    Nonlinear model of analog valve

    Virvalo, T., 1997, The Fifth Scandinavian International Conference on Fluid Power, SICFP 97, Linköping, Sweden, 28-30 May 1997. p. 199-214

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  40. Published

    Pneumatic automation for firework assembly

    Virvalo, T., Luomaranta, M. & Mäkinen, E., 1989, In : Power International. 35, 413, p. 267-270

    Research output: Contribution to journalArticleProfessional

  41. Published

    Sähköpneumaattisen voiman- ja paineensäätö

    Virvalo, T. & Kukkonen, E., 1990, In : Konepajamies. No 1, p. 48-53

    Research output: Contribution to journalArticleProfessional

  42. Published

    Comparing control methods of feed force

    Virvalo, T., 2005, Proceedings of the Sixth International Conference on Fluid Power Transmission and Control, ICFP'2005, April 5-8, Hangzhou, China. Lu, Y. (ed.). p. 134-138

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  43. Published

    Comparison of tracking controllers of hydraulic cylinder drive by simulations

    Virvalo, T., 2008, Proceedings of the 7th International Conference on Machine Automation ICMA2008, Service Robotics and Mechatronics, September 24-26, 2008, Awaji, Japan. p. 37-40

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  44. Published

    Fuzzy state controller and its application in hydraulic position servo

    Virvalo, T. & Zhao, T., 1993, 2nd JHPS International Symposium on Fluid Power, Tokyo Japan, 6-9 September 1993. p. 6 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  45. Published

    The special edging press for heavy plates

    Virvalo, T., Tuominen, P., Luomaranta, M., Lehto, E., Koskinen, K. & Vilenius, M., 1994, 11th Aachen Colloquium on Fluid Power Technology, Aachen Germany, 8-10 March 1994. p. 18 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  46. Published

    Developing intelligent actuator systems - experimenting with bitbus and the 8096

    Virvalo, T. & Puusaari, P., 1989, In : Microprocessors and Microsystems. 13, 4, p. 263-270

    Research output: Contribution to journalArticleScientificpeer-review

  47. Published

    Regulation of pneumatic pressure in a fastly varying volume

    Virvalo, T. & Mäkinen, E., 1990, 13th Conference Fluid Power '90, Brno CSSR, 1990. p. 7 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  48. Published

    Hajautettu ohjausjärjestelmä koneautomatiikassa

    Virvalo, T., 1985, INSKO:n kurssi Mekatroniikkapäivä. Helsinki: Insinööritieto Oy, p. 1-5 5 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

  49. Published

    A computed force controller in a pneumatic position servo

    Virvalo, T., Linjama, M. & Mattila, J., 1997, New Achievements and Ideals in Fluid Power Engineering, Proceedings of the 4th International Conference on Fluid Power Transmission and Control, '97 ICFP, September 9-11, Hangzhou, China. Yongxiang, L. & Yiyuan, G. (eds.). Beijing: International Academic Publishers, p. 327-330

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  50. Published

    Sähköpneumatiikan nykymahdollisuudet

    Virvalo, T., 1989, Helsinki: Unknown Publisher. 13 p. (Menestystuotteita mekatroniikalla - seminaari)

    Research output: Book/ReportCommissioned reportProfessional

  51. Published

    The design of pneumatic cylinder driven position servo system

    Virvalo, T., 2001, Sbornik konference, Hydraulika a Pneumatika, June 5-6, 2001, Ostrava, Czech Republic. p. 217-224

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  52. Published

    Comparing controllers in hydraulic motion control

    Virvalo, T., 2002, Bath Workshop on Power Transmission and Motion Control (PTMC 2002). Burrows, C. R. & Edge, K. A. (eds.). p. 215-228

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  53. Published

    Compensating the effect of supply line pressure variations in a pneumatic position servo system

    Virvalo, T. & Mäkinen, E., 2001, The Seventh Scandinavian International Conference on Fluid Power, SICFP´01, Linköping, Sweden, May 30 - June 1, 2001. p. 413-428

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  54. Published

    Experimental study of robustness of some controllers in a hydraulic position servo drive

    Virvalo, T. & Linjama, M., 2001, Sbornik konference, Hydraulika a Pneumatika, June 5-6, 2001, Ostrava, Czech Republic. p. 199-208

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  55. Published

    Hydrauliikka ja pneumatiikka asemaservon toteutuksessa, osa IV Pneumaattisen asemaservon suunnittelu

    Virvalo, T. & Mäkinen, E., 2003, In : Fluid Finland. 2, 3, p. 12-18

    Research output: Contribution to journalArticleProfessional

  56. Published

    Comparing pneumatic and water hydraulic positioning system for process valves

    Virvalo, T., 2005, Proceedings of the 6th JFPS International Symposium on Fluid Power, November 7-10, 2005, Tsukuba, Japani. p. 455-460

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  57. Published

    Compensation of the null point drift of a hydraulic servo valve in a position servo application

    Virvalo, T. & Linjama, M., 1999, Proceedings of the 3rd International Symposium on Fluid Power Transmission and Control, September 7-9, 1999, Harbin, China. p. 259-263

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  58. Published

    Nonlinear Model of Pneumatic Servo Valves

    Virvalo, T., 1999, Proceedings of The Sixth Scandinavian International Conference on Fluid Power, May 26 - 28, 1999, Tampere, Finland. Koskinen, K. T., Vilenius, M. & Tikka, K. (eds.). Tampere, p. 743-758

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  59. Published

    Feasibility Study of a Water Hydraulic Positioning System in Process Valves

    Virvalo, T., 2002, Proceedings of the 5th JFPS International Symposium on Fluid Power, Nara 2002, November 13, 2002. Japan, p. 131-136

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  60. Published

    Improving the use of the stroke of a pneumatic servo cylinder

    Virvalo, T., 1995, Proceedings of The Fourth Scandinavian International Conference on Fluid Power, September 26-29, Tampere, Finland. p. 528-544

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  61. Published

    The distributed control system- a world of new possibilities

    Virvalo, T. & Puusaari, P., 1991, In : Mechatronics. 1, 4, p. s. 11

    Research output: Contribution to journalArticleScientificpeer-review

  62. Published

    On the motion control of a hydraulic servo cylinder drive

    Virvalo, T., 1999, Fluid Power. Proceedings of the Fourth JHPS International Symposium on Fluid Power, Tokyo, 15-17 November 1999. Yokota, S. (ed.). p. 105-110 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  63. Published

    Mikrotietokone hydrauliikan ohjauksessa

    Virvalo, T., 1985, Täydennyskoulutuskurssi "Hydraulisten järjestelmien sähköinen ohjaus", Tampereen teknillinen korkeakoulu, opintomoniste 108. Tampere, p. 17 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  64. Published

    Hydrauliikka ja pneumatiikka asemaservon toteutuksessa

    Virvalo, T. & Mäkinen, E., 2002, In : Fluid Finland. 3, p. 12-18

    Research output: Contribution to journalArticleProfessional

  65. Published

    From Course Exercese to R&D Project of Mechatronic Systems

    Virvalo, T., Raneda, A., Mäkinen, E. & Vilenius, J., 2002, 3rd European Workshop on Education in Mechatronics Brodge between R&D and Education, 26-27 September, 2002, Denmark. Conrad, F. (ed.). Denmark, p. 8 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  66. Published

    Bitbus koneväyläksi

    Virvalo, T. & Puusaari, P., 1987, In : Prosessori. 15, p. 34-35

    Research output: Contribution to journalArticleProfessional

  67. Published

    Verifying the usefulness of linear model in the design of heavy pneumatic position servo

    Virvalo, T., 1995, Ninth World Congress on the Theory of Machines and Mechanisms, Milano , Italy, August 29-September 2. Milano, p. 1381-1385

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  68. Published

    Compensation of dead band and hysteresis of proportional valve

    Virvalo, T., 2005, Proceedings of the 50th National Conference on Fluid Power, March 16-18, 2005, Las Vegas, Nevada USA. p. 233-241

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  69. Published

    Design idea: Binary valve grid expands servo's flow range

    Virvalo, T., 1985, In : Hydraulics & Pneumatics. 38, 8, p. 18-18

    Research output: Contribution to journalArticleScientificpeer-review

  70. Published

    Detect of piston seal leakage in pneumatic position servo cylinder drive

    Virvalo, T. & Mäkinen, E., 2006, Proceedings of the 19th International Conference on Hydraulics and Pneumatics, May 30-31, 2006 Prague, Czech Republic. Konarik, P. (ed.). p. 186-194

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  71. Published

    Hydraulisen ja pneumaattisen asemaservon digitaalinen säätö

    Virvalo, T., 1989, Tampere: TTKK. 26 p. (Täydennyskoulutuskurssi: Hydraulisten ja pneumaattisten toimilaitteiden digitaalinen säätö, ohjelmointi ja ohjaus)

    Research output: Book/ReportCommissioned reportProfessional

  72. Published

    Cross utilizing degree of freedoms of boom in energy saving concept

    Virvalo, T. & Seppälä, J., 2006, Power Transmission and Motion Control, PTMC 2006, University of Bath, UK, 13-15 September 2006. Johnston, D. N. & Edge, K. A. (eds.). p. 31-43

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  73. Published

    Example based text matching methodology for routing tasks

    Visa, A., Toivonen, J., Vesanen, T., Mäkinen, J., Back, B. & Vanharanta, H., 2002, Proceedings of the 11th Text REtrieval Conference, TREC 2002, Gaithersburg, Maryland, USA, 19-22 November 2002. Voorhees, E. M. & Buckland, L. P. (eds.). NIST, p. 1-9 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  74. Published

    Tampere University of Technology at TREC 2001

    Visa, A., Toivonen, J., Vesanen, T. & Mäkinen, J., 2001, TREC 2001, Proceedings of the 10th Text REtrieval Conference, 13-16 November 2001, Gaithersburg, Maryland, USA. Voorhees, E. M. & Harman, D. K. (eds.). NIST, p. 495-501

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  75. Published

    Knowledge discovery from text documents based on paragraph maps

    Visa, A., Toivonen, J., Ruokonen, P., Vanharanta, H. & Back, B., 2000, Proceedings of the 33rd Hawaii International Conference on System Sciences, Maui, Hawaii, January 4-7, 2000. Sprague, R. H. J. (ed.). p. 9 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  76. Published

    Contents matching defined by prototypes: Methodology verification with books of the bible

    Visa, A., Toivonen, J., Vanharanta, H. & Back, B., 2002, In : Journal of Management Information Systems. 18, 4, p. 87-100

    Research output: Contribution to journalArticleScientificpeer-review

  77. Published

    A New methodology for Knowledge Retrieval from Text Documents

    Visa, A., Toivonen, J., Back, B. & Vanharanta, H., 2000, Proceedings of TOOLMET2000 Symposium-Tool Enviroments and Development Methods for Intelligent Systems 13 - 14, April, 2000 University of Oulu, Linnainmaa Oulu, Finland. Yliniemi, L. & Juuso, E. (eds.). p. 147-151

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  78. Published

    Improvements on a knowledge discovery methodoloy for text documents

    Visa, A., Toivonen, J., Back, B. & Vanharanta, H., 2000, SSGRR 2000, International Conference on Advances in Infrastructure for Electronic Business, Science, and Education on the Internet, July 31 - August 6, 2000, L'Aquila, Italy Business, Science, and Education on the Internet. p. 7 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  79. Published

    Data mining on time series of sequential patterns

    Visa, A., 2002, Data Mining and Knowledge Discovery: Theory, Tools, and Technology IV, 1-4 April 2002, Orlando, USA, Proceedings of SPIE. Dasarathy, B. V. (ed.). p. 166-171

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  80. Published

    Data Mining of text as a tool in authorship attribution

    Visa, A., Toivonen, J., Autio, S., Mäkinen, J., Back, B. & Vanharanta, H., 2001, Proceedings of SPIE Data Mining and Knowlegde Discovery: Theory, Tools, and Technology III. p. 149-156

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  81. Published

    Sequence of Texture Images and Process Control

    Visa, A. & Autio, S., 2000, Proceedings of SPIE, Intelligent Robots and Computer Vision XIX: Algorithms, Techniques, and Active Vision, 7-8 November 2000, Boston, USA. Casasent, D. (ed.). p. 124-130

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  82. Published

    Toward text understanding - classification of text documents by word map

    Visa, A., Toivonen, J., Back, B. & Vanharanta, H., 2000, Data Mining and Knowledge Discovery: Theory, Tools and Technology II, 24-25 April, 2000, Orlando, Florida, Proceedings of SPIE. Dasarathy, B. V. (ed.). p. 299-305

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  83. Published

    Prototype matching- finding meaning in the books of the Bible

    Visa, A., Toivonen, J., Vanharanta, H. & Back, B., 2001, Proceedings of the the 34th Annual Hawaii International Conference on System Sciences, January 3-6, 2001, Maui, Hawaii. Sprague, R. H. (ed.). IEEE, p. 1-9 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  84. Published

    New tools to help in the recruitment process

    Visa, A., Einolander, J. & Vanharanta, H., 2015, 6th International Conference on Applied Human Factors and Ergonomics (AHFE 2015) and the Affiliated Conferences, AHFE 2015. Elsevier, p. 653–659 7 p. (Procedia Manufacturing; vol. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  85. Selected Lectures on Multiple Access and Queuing Systems: revised selected papers under the edition

    Vishnevsky, V. (ed.), Vinel, A. (ed.), Koucheryavy, Y. (ed.) & Staehle, D. (ed.), 2008, SUAI.

    Research output: Book/ReportAnthologyScientificpeer-review

  86. Optimization of the frame structure for the IEEE 802.16 in the error-prone channel

    Vishnevsky, V. & Vinel, A., 2008, In selected and revised papers from International Workshop on Multiple Access Communications - MACOM-2008, June 2008, Saint-Petersburg, Russia June 2008. p. 86-90

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  87. Published

    3D Forming of Paperboard: The Influence of Paperboard Properties on Formability

    Vishtal, A., Hauptmann, M., Zelm, R., Majschak, J-P. & Retulainen, E., 2013, In : Packaging Technology and Science. p. 1-15 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  88. Published

    Improving the extensibility, wet web and dry strength of paper by addition of agar

    Vishtal, A. & Retulainen, E., 2014, In : Nordic Pulp and Paper Research Journal. 29, 3, p. 434-443 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  89. Published

    An approach for improved 3D formability of paper

    Vishtal, A. & Retulainen, E., 2014, In : IPW. 12, p. 46-50 5 p.

    Research output: Contribution to journalArticleProfessional

  90. Published

    Boosting the extensibility potential of fibre networks: A review

    Vishtal, A. & Retulainen, E., 2014, In : BioResources. 9, 4, p. 7951-8001 51 p.

    Research output: Contribution to journalReview ArticleScientificpeer-review

  91. Published

    Formability of paper and its improvement

    Vishtal, A., 4 Jun 2015, VTT. 108 p. (VTT Science; vol. 94)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  92. Published

    Improving the extensibility of paper: Sequential spray addition of gelatine and agar

    Vishtal, A., Khakalo, A., Rojas, O. J. & Retulainen, E., 2015, In : Nordic Pulp and Paper Research Journal. 30, 3, p. 452-460 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  93. Published

    Managing non-core technologies: the management of Research Surplus Portfolio

    Viskari, S., Salmi, P., Torkkeli, M., Seppänen, M. & Kononen, R., 2007, Proceedings of The XVIII ISPIM Annual Conference, Warsaw, Poland, 17-20 June 2007. Torkkeli, M., Conn, S. & Bitran, I. (eds.). p. 14 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  94. Published

    Fabrication of Single Wall Carbon Nanotube Saturable Absorber in the Micro-grooved Single Mode Fiber

    Viskontas, K., Mikutis, M., Pilipavicius, J., Gumenyuk, R., Okhotnikov, O. & Rusteika, N., 21 Jun 2015, The European Conference on Lasers and Electro-Optics 2015. Optical Society of America OSA, paper CE_P_35

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  95. Published

    Matrix Perturbations in Covariance and Autocovariance Matrix Estimators

    Visuri, S., Koivunen, V., Möttönen, J. & Oja, H., 1999, Proceedings of 1999 Finnish Signal Processing Symposium FINSIG'99, Oulu, May 31, 1999. Saarnisaari, H. & Juntti, M. (eds.). p. 142-146

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  96. Published

    Multichannel Signal Processing Using Spatial Rank Covariance Matrices

    Visuri, S., Oja, H. & Koivunen, V., 1999, Proceedings of the IEEE-EURASIP Workshop on Nonlinear Signal and Image Processing (NSIP'99), June 20-23, 1999, Antalya, Turkey. Cetin, A. E. (ed.). p. 75-79

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  97. Published

    Antimicrobial activity and molecular analysis of azoderivatives of β-diketones

    Viswanathan, A., Sala, A., Yli-Harja, O. & Kandhavelu, M., 23 Jan 2015, In : European Journal of Pharmaceutical Sciences. 66, p. 83-89 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  98. Published

    Phase-dependent dynamics of the lac promoter under nutrient stress

    Viswanathan, A., Anufrieva, O., Sala, A., Yli-Harja, O. & Kandhavelu, M., 19 Apr 2016, In : Research in Microbiology. 167, 6, p. 451-461

    Research output: Contribution to journalArticleScientificpeer-review

  99. Published

    Decane-1,2-diol derivatives as potential antitumor agents for the treatment of glioblastoma

    Viswanathan, A., Zhurina, A., Assoah, B., Paakkunainen, A., Musa, A., Kute, D., Saravanan, K. M., Yli-Harja, O., Candeias, N. R. & Kandhavelu, M., 15 Oct 2018, In : European Journal of Pharmacology. 837, p. 105-116

    Research output: Contribution to journalArticleScientificpeer-review

  100. Published

    In vitro anti-glioblastoma activity of L-valine derived boroxazolidones

    Viswanathan, A., Sebastianelli, G., Brown, K., Raunio, J., Sipilä, V., Yli-Harja, O., Candeias, N. R. & Kandhavelu, M., 5 Jul 2019, In : European Journal of Pharmacology. 854, p. 194-200 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

Download list To download, please limit the number of search results to 1,000 or less.