Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. Published

    Applying ERP-system in academic education: an analysis from three actor perspectives

    Virtanen, P. P. & Helander, N. M., 2005, Proceedings of the 3rd International Conference on Education and Information Systems: Technologies and Applications, July 14-17, 2005, Orlando, FL, USA. Malpica, E., Welsch, F. & Tremante, A. (eds.). p. 131-135

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  2. Published

    Modeling and analyzing failure logic of products and systems

    Virtanen, S., Hagmark, P-E. & Penttinen, J-P., 2005, Proceedings of Reliability, Safety and Hazard: Advances in Risk-Informed Technology, New Delhi, India, 2005. Varde, P. V. (ed.). p. 1-8 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  3. Published

    Epähomogeenisen fysikaalisesti epälineaarisen pilarin kantokyky

    Virtanen, S., 1982, I Suomen mekaniikkapäivien esitelmät, Oulun yliopisto, 1982. Pramila, A. (ed.). Oulu: Oulun yliopisto, p. 45-52 (Oulun yliopisto, Konetekniikan osasto, raportti; no. 33).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  4. Published

    Modeling and analysis of causes and consequences of failures

    Virtanen, S., Hagmark, P-E. & Penttinen, J-P., 2006, Proceedings of the First International Conference on Maintenance Engineering, Chengdu, P.R. China, October 15-18, 2006. Xisheng, J., Hongzhong, H. & Wenbin, W. (eds.). p. 506-511

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  5. Published

    Application of Design Review to Probabilistic Risk Assessment in a Large Investment Project

    Virtanen, S., Penttinen, J-P., Kiiski, M. & Jokinen, J., 2014, Proceedings of the Probabilistic Safety Assessment and Management PSAM12, June 2014, Honolulu, Hawaii. p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  6. Published

    AlueKRISO 2002, Johtamistaidot ajan tasalle

    Virtanen, P., 2002, In : Pirkan Viesti. 45, 3, p. s. 8

    Research output: Contribution to journalArticleGeneral public

  7. Published

    Effect of engine parameters on diesel soot particle properties

    Virtanen, A., Ristimäki, J., Vaaraslahti, K. & Keskinen, J., 2005, EAC European Aerosol Conference 2005, 28 August-2 September 2005, Chent, Belgium. Maenhaut, W. (ed.). p. p. 370

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  8. Published

    Aggregation in aqueous poly(N-isopropylacrylamide)-block-poly/ethylene oxide) solutions studied by fluorescence spectroscopy and light scattering

    Virtanen, J., Holappa, S., Lemmetyinen, H. & Tenhu, H., 2002, In : Macromolecules. 35, p. 4763-4769

    Research output: Contribution to journalArticleScientificpeer-review

  9. Published

    Method for measuring effective density and fractal dimension of aerosol agglomerates

    Virtanen, A., Ristimäki, J. & Keskinen, J., 2004, In : Aerosol Science and Technology. 38, p. 437-446

    Research output: Contribution to journalArticleScientificpeer-review

  10. Published

    Artificial Cr- and Fe-oxide passive layers prepared by sputter deposition

    Virtanen, S., Schmuki, P., Böhni, H., Vuoristo, P. & Mäntylä, T., 1995, In : Journal of the Electrochemical Society. 142, 9, p. 3076-3072

    Research output: Contribution to journalArticleScientificpeer-review

  11. Published

    Separation of sound sources

    Virtanen, T., 2004, Digest of TISE Seminar 2004, Kangasala, 1 June 2004. Koivisto, P. (ed.). p. 38-39

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  12. Published

    Reliability and maintainability engineering - a probabilistic approach

    Virtanen, S., 2005, In : Marine News, Wärtsilä. 3, p. 18-21

    Research output: Contribution to journalArticleProfessional

  13. Published

    Facilitating change in a dispersed team-based organization: a qualitative case study

    Virtanen, P., Helander, N. & Kukko, M., 2010, EURAM 2010, 10th European Academy of Management Conference, 19-22 May, 2010, Rome, Italy. p. 22

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  14. Published

    Separation of Harmonic sounds Using Multipitch Analysis and Iterative Parameter Estimation

    Virtanen, T. & Klapuri, A., 2001, 2001 IEEE Workshop on Applications of Signal Processing to Audio and Acoustics, New York, USA, October 21-24, 2001. p. 83-86

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  15. Published

    Techniques for Noise Robustness in Automatic Speech Recognition

    Virtanen, T. (ed.), Singh, R. (ed.) & Raj, B. (ed.), 2012, Chichester, UK: Wiley & Sons.

    Research output: Book/ReportAnthologyScientificpeer-review

  16. Published

    Ennakoivan huollon suunnittelu ja merkitys tuotteen luotettavuuteen, käytettävyyteen ja kunnossapitokustannuksiin

    Virtanen, S., 2006, Kotel-seminaari, Luotettavuuden Suunnittelu - Katse Tulevaisuuteen, 10.10.2006, Helsinki. p. 12 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  17. Published

    Impact of mechanical and enzymatic pretreatments on softwood pulp fiber wall structure studied with NMR spectroscopy and X-ray scattering

    Virtanen, T., Penttilä, P. A., Maloney, T. C., Grönqvist, S., Kamppuri, T., Vehviläinen, M., Serimaa, R. & Maunu, S. L., Jun 2015, In : Cellulose. 22, 3, p. 1565-1576 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  18. Published

    Optimization of High-Power Narrow-Linewidth Lasers for Space Applications

    Virtanen, H., Uusitalo, T. & Dumitrescu, M., Jun 2015, Northern Optics & Photonics 2015, 1.-4.6.2015, Saimaa, Finland. University of Eastern Finland

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  19. Published

    Proceedings of the Detection and Classification of Acoustic Scenes and Events 2016 Workshop (DCASE2016)

    Virtanen, T. (ed.), Mesaros, A. (ed.), Heittola, T. (ed.), Plumbley, M. D. (ed.), Foster, P. (ed.), Benetos, E. (ed.) & Lagrange, M. (ed.), 2016, Tampere University of Technology. Department of Signal Processing. 119 p.

    Research output: Book/ReportAnthologyScientificpeer-review

  20. Published

    Simulation studies of DFB laser longitudinal structures for narrow linewidth emission

    Virtanen, H., Uusitalo, T. & Dumitrescu, M., 17 Aug 2016, 16th International Conference on Numerical Simulation of Optoelectronic Devices, NUSOD 2016. IEEE, p. 153-154 2 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  21. Published

    Potentiostat for customized supercapacitor measurements

    Virtanen, J. & Tuukkanen, S., 31 Mar 2016, p. 1-1. 1 p.

    Research output: Other conference contributionPaper, poster or abstractScientific

  22. Published

    Spectral characteristics of narrow-linewidth high-power 1180 nm DBR laser with surface gratings

    Virtanen, H., Aho, A. T., Viheriälä, J., Korpijärvi, V-M., Uusitalo, T., Koskinen, M., Dumitrescu, M. & Guina, M., Jan 2017, In : IEEE Photonics Technology Letters. 29, 1, p. 114-117 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  23. Published

    New value chains to construction: advancing products and services

    Virtanen, J-P., Hyyppä, H., Ståhle, P., Kalliokoski, S., Kähkönen, K. E., Ahlavuo, M., Launonen, P., Hyyppä, J., Kukko, A. & Julin, A., 2016, Proceedings of the 20th CIB World Building Congress 2016: Advancing products and services. Achour, N. (ed.). Tampere University of Technology. Department of Civil Engineering, Vol. V. p. 954-965 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  24. Published

    Simulation studies of DFB laser longitudinal structures for narrow linewidth emission

    Virtanen, H., Uusitalo, T. & Dumitrescu, M., 23 Mar 2017, In : Optical and Quantum Electronics. 49, 4, 13 p., 160.

    Research output: Contribution to journalArticleScientificpeer-review

  25. Published

    Kactus2: A graphical EDA tool built on the IP-XACT standard

    Virtanen, J., Kamppi, A., Pekkarinen, E., Määttä, J-M., Järvinen, J., Matilainen, L. J., Teuho, M. & Hämäläinen, T., 2 May 2017, In : The Journal of Open Source Software. 2, 13, p. 1 1 p.

    Research output: Contribution to journalArticleScientificpeer-review

  26. Published

    A Method for Producing an Antenna Element of an Rfid Transponder

    Virtanen, J., 22 Sep 2014, IPC No. H01Q 1/ 22 A I, Patent No. MX2014006628, Priority date 29 Nov 2012, Priority No. WO2012EP73940

    Research output: PatentScientific

  27. Published

    Pyrolysed cellulose nanofibrils and dandelion pappus in supercapacitor application

    Virtanen, J., Pammo, A., Keskinen, J., Sarlin, E. & Tuukkanen, S., 2017, In : Cellulose. 24, 8, p. 3387–3397 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  28. Published

    Dispenser system for nanocellulose 3D printing

    Virtanen, J., Kallio, P. & Tuukkanen, S., 2017, Automaatiopäivät22 Proceedings. Suomen Automaatioseura, p. 1-6 6 p. 46

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  29. Published

    Fabrication and characterization of nanocellulose aerogel structures

    Virtanen, J., Janka, M. & Tuukkanen, S., 13 Jun 2017, EMBEC & NBC 2017: Joint Conference of the European Medical and Biological Engineering Conference (EMBEC) and the Nordic-Baltic Conference on Biomedical Engineering and Medical Physics (NBC), Tampere, Finland, June 2017. Springer, p. 1029-1032 4 p. (IFBME Proceedings; vol. 65).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  30. Published

    Novel hybride materials and related methods and devices

    Virtanen, J., Tilli, M. & Keinänen, P., 24 Dec 2009, IPC No. C07D 303/ 04 A I, Patent No. US2009318717, Priority date 5 Feb 2009, Priority No. US20090322698

    Research output: PatentScientific

  31. Published

    Novel hybride materials and related methods and devices

    Virtanen, J., Tilli, M. & Keinänen, P., 2 Jul 2009, IPC No. C07D 301/ 00 A I, Patent No. US2009171106, Priority date 11 Oct 2005, Priority No. WO2005FI00437

    Research output: PatentScientific

  32. Published

    On continuous deployment maturity in customer projects

    Virtanen, A., Kuusinen, K., Leppänen, M., Luoto, A., Kilamo, T. & Mikkonen, T., 3 Apr 2017, 32nd Annual ACM Symposium on Applied Computing, SAC 2017. ACM, p. 1205-1212 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  33. Published

    Methods and Devices for Facile Fabrication of Nanoparticles and Their Applications

    Virtanen, J., Keinänen, P. & Tilli, M., 2006

    Research output: PatentScientific

  34. Published

    Multi-material bio-printing facilities

    Virtanen, J. & Tuukkanen, S., 3 Oct 2017. 1 p.

    Research output: Other conference contributionPaper, poster or abstractScientific

  35. Published

    Team leaders perceptions in the renewing of software production process

    Virtanen, P., 31 May 2013, Computers and People Research (SIGMIS-CPR’13) .

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  36. Published

    Using componentization as a means to standardize software development pro-cess: change from organizational redundancy to process effectivity

    Virtanen, P., 17 Aug 2011, IRIS/SCIS.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  37. Published

    Multi-material bio-printing facilities

    Virtanen, J. & Tuukkanen, S., 26 Oct 2017. 1 p.

    Research output: Other conference contributionPaper, poster or abstractScientific

  38. Published

    Proceedings of the Detection and Classification of Acoustic Scenes and Events 2017 Workshop (DCASE2017)

    Virtanen, T., Mesaros, A., Heittola, T., Diment, A., Vincent, E., Benetos, E. & Elizalde, B. M., 6 Nov 2017, Tampere University of Technology. Laboratory of Signal Processing. 142 p.

    Research output: Book/ReportAnthologyScientificpeer-review

  39. Published

    Narrow-Linewidth DFB and DBR Lasers with Surface Gratings Fabricated Using UV-Nanoimprint Lithography

    Virtanen, H., 24 Nov 2017, Tampere University of Technology. 70 p. (Tampere University of Technology. Publication; vol. 1512)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  40. Published

    Narrow-linewidth 780 nm DFB lasers fabricated using nanoimprint lithography

    Virtanen, H., Uusitalo, T., Karjalainen, M., Ranta, S., Viheriala, J. & Dumitrescu, M., 2018, In : IEEE Photonics Technology Letters. 30, 1, p. 51-54

    Research output: Contribution to journalArticleScientificpeer-review

  41. Published

    Introduction to sound scene and event analysis

    Virtanen, T., Plumbley, M. D. & Ellis, D., 2018, Computational Analysis of Sound Scenes and Events. Virtanen, T., Plumbley, M. D. & Ellis, D. (eds.). Cham: Springer, p. 3-12

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  42. Published

    Computational analysis of sound scenes and events

    Virtanen, T. (ed.), Plumbley, M. D. (ed.) & Ellis, D. (ed.), 2018, Cham: Springer.

    Research output: Book/ReportAnthologyScientificpeer-review

  43. Published

    Cost effective potentiostat design for large dynamic range measurements

    Virtanen, J. & Tuukkanen, S., 15 May 2015. 1 p.

    Research output: Other conference contributionPaper, poster or abstractScientific

  44. Published

    Evaluation of dry electrodes in canine heart rate monitoring

    Virtanen, J., Somppi, S., Törnqvist, H., Jeyhani, V., Fiedler, P., Gizatdinova, Y., Majaranta, P., Väätäjä, H., Cardó, A. V., Lekkala, J., Tuukkanen, S., Surakka, V., Vainio, O. & Vehkaoja, A., 1 Jun 2018, In : Sensors. 18, 6, 1757.

    Research output: Contribution to journalArticleScientificpeer-review

  45. Published

    In vitro detection of common rhinosinusitis bacteria by the eNose utilising differential mobility spectrometry

    Virtanen, J., Hokkinen, L., Karjalainen, M., Kontunen, A., Vuento, R., Numminen, J., Rautiainen, M., Oksala, N., Roine, A. & Kivekäs, I., Sep 2018, In : European Archives of Oto-Rhino-Laryngology. 275, 9, p. 2273-2279

    Research output: Contribution to journalArticleScientificpeer-review

  46. Published

    Piezoelectric cantilever force sensor sensitivity measurements

    Virtanen, J., Sariola, V. & Tuukkanen, S., 3 Sep 2018, XXII World Congress of the International Measurement Confederation (IMEKO 2018): 3–6 September 2018, Belfast, United Kingdom. IOP Press, p. 1-4 4 p. (Journal of Physics: Conference Series; vol. 1065).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  47. Published

    Time-Frequency Processing: Spectral Properties

    Virtanen, T., Vincent, E. & Gannot, S., 2018, Audio Source Separation and Speech Enhancement. Wiley, p. 15-30

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  48. Accepted/In press

    Direct Measurement of Contraction Force in Human Cardiac Tissue Model Using Piezoelectric Cantilever Sensor Technique

    Virtanen, J., Toivanen, M., Toimela, T., Heinonen, T. & Tuukkanen, S., 25 Oct 2019, (Accepted/In press) In : Current Applied Physics. 20, 1, p. 155-160 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  49. Published

    Piezoelectric dual axis cantilever force measurement probe

    Virtanen, J., Pammo, A., Vehkaoja, A. & Tuukkanen, S., 15 Feb 2020, In : IEEE Sensors Journal. 20, 4, 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  50. Published

    Dry contact electrodes performance in canine ECG

    Virtanen, J., Leivo, J., Somppi, S., Törnqvist, H., Fiedler, P., Väätäjä, H., Surakka, V. & Vehkaoja, A., 4 Dec 2018, ACI '18: Proceedings of the Fifth International Conference on Animal-Computer Interaction. ACM, 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  51. Published

    New solution of motion control problem in mechatronic system

    Virvalo, T. & Puusaari, P., 1992, In : Computers Elect. Engng. 18, 1, p. 41-50

    Research output: Contribution to journalArticleScientificpeer-review

  52. Published

    Simple circuits control acceleration and deceleration

    Virvalo, T., 1986, In : Hydraulics and Pneumatics. 39, 11(March), p. 65-67

    Research output: Contribution to journalArticleProfessional

  53. Published

    Hydrauliikka ja pneumatiikka asemaservon toteutuksessa, osa III, Vesihydraulisen asemaservon suunnittelu

    Virvalo, T. & Mäkinen, E., 2003, In : Fluid Finland. 2, 2, p. 24-31

    Research output: Contribution to journalArticleProfessional

  54. Published

    Modelling hydraulic position servo realized with commercial components

    Virvalo, T., 1993, 3rd International Conference on Fluid Power Transmission and Control, Zhejiang University, Hangzhou China, 13-16 September 1993. p. 6 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  55. Published

    Elektroniset ohjaimet hydrauliikassa

    Virvalo, T., 1985, Täydennyskoulutuskurssi "Hydraulisten järjestelmien sähköinen ohjaus", Tampereen teknillinen korkeakoulu, opintomoniste 108. Tampere, p. 27 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  56. Published

    Comparing different controllers of an electrohydraulic position servo

    Virvalo, T., Linjama, M. & Mattila, J., 1997, New Achievements and Ideals in Fluid Power Engineering, Proceedings of the 4th International Conference on Fluid Power Transmission and Control, '97 ICFP, September 9-11, Hangzhou, China. Yongxiang, L. & Yiyuan, G. (eds.). Beijing: International Academic Publishers, p. 215-219

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  57. Published

    Energy storing and recovering in loading and un-loading cycles of forward loader

    Virvalo, T. & Sun, W., 2007, Power Transmission and Motion Control (PTMC 2007), University of Bath, UK, 12-14 September 2007. Johnston, D. N. & Plummer, A. R. (eds.). p. 255-268

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  58. Published

    Simple Electronics Control Servotype Hydraulic Action

    Virvalo, T. K., 1982, In : Hydraulics & Pneumatics. p. s. 28

    Research output: Contribution to journalArticleScientificpeer-review

  59. Published

    Tietokone simuloi tuotantosolua

    Virvalo, T. & Lehtinen, M., 1987, In : Prosessori. 10, p. 18-19

    Research output: Contribution to journalArticleProfessional

  60. Published

    The use of Q-parameter in design of hydraulic and pneumatic position servo

    Virvalo, T. & Pohjolainen, S., 1989, Fluid Power Transmission and Control - Proceedings of the 2nd International Conference. Kiina, p. 118-121

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  61. Published

    An intelligent novel valve concept and its possibilities

    Virvalo, T., 2002, Proceedings of the 8th Mechatronics Forum International Conference, University of Twente, Netherlands, 24-26 June, 2002. van Amerongen, J. (ed.). p. 259-268

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  62. Published

    Hydraulic redesign improves machine productivity

    Virvalo, T., 1985, In : Hydraulics & Pneumatics. 38, 11, p. 77-79, 124

    Research output: Contribution to journalArticleScientificpeer-review

  63. Published

    On the encoder based velocity and acceleration feedback signals in demanding servo applications

    Virvalo, T. & Lehto, E., 1998, Advanced Mechatronics: first-time-right: proceedings of the ICMA '98. 2nd International Conference on Machine Automation, September 15-18, 1998, Tampere, Finland. Kivikoski, M. (ed.). p. 481-496

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  64. Published

    Mechatronic design for improving performance and efficiency of sawing process by adding a sensor and controller

    Virvalo, T., 2004, In: Conrad, F. Workshop, Mechatronics Day 2004, 10.6.2004, Technical University of Denmark. p. 6 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  65. Published

    On the motion control of pneumatic servo cylinder drives

    Virvalo, T., 1998, Proceedings - The Fourth International Conference on Motion and Vibration Control MOVIC, August 25-28, 1998, ETH Zurich, Switzerland. Schweitzer, G. (ed.). p. 733-738

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  66. Published

    The Influence of Pumps and Valves on the Efficiency of a Hydraulic Boom, Chapter 8

    Virvalo, T. & Vilenius, M., 2000, Developments in Fluid Power Control of Machinery and Manipulators. Garbacik, A. & Stecki, J. (eds.). Cracow: Fluid Power Net Publication, p. 183-207

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  67. Published

    User friendly environment for the R&D of controllers in heavy machinery

    Virvalo, T., Linjama, M., Aaltonen, V. & Kivikoski, M., 2000, Proceedings of the International Conference on Machine Automation, ICMA2000, Human Friendly Mechatronics, September 27-29, 2000, Osaka Institute of Technology, Osaka, Japan. Japani, p. 213-218

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  68. Published

    On the Damping of a Hydraulic Cylinder Drive

    Virvalo, T., 1999, Proceedings of The Sixth Scandinavian International Conference on Fluid Power, May 26 - 28, 1999, Tampere, Finland. Koskinen, K. T., Vilenius, M. & Tikka, K. (eds.). Tampere, p. 499-518

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  69. Published

    Toimilaitteiden ohjaustekniikka

    Virvalo, T., 1985, HITECH-huipputekniikan täydennyskoulutuskurssi, Tampereen teknillinen korkeakoulu, Tampere. Tampere, p. 5 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  70. Published

    Simple design of a hydraulic and pneumatic system with independent intelligent actuator

    Virvalo, T. & Puusaari, P., 1990, 13th Conference Fluid Power '90, Brno CSSR, 1990. p. 10 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  71. Published

    Suuren hitauskuorman siirto

    Virvalo, T., 1985, Täydennyskoulutuskurssi "Hydraulisten järjestelmien sähköinen ohjaus", Tampereen teknillinen korkeakoulu, opintomoniste 108. Tampere, p. 23 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  72. Published

    Design, simulation and experimetal tests of hydraulic hydro-sounder

    Virvalo, T. & Laine, A., 2005, Proceedings of the 6th JFPS International Symposium on Fluid Power, November 7-10, 2005, Tsukuba, Japani. p. 149-154

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  73. Published

    User friendly environment for the R&D of controllers in heavy machinery

    Virvalo, T., Linjama, M., Aaltonen, V. & Kivikoski, M., 2000, Human Friendly Mechatronics, Selected Papers of the International Conference on Machine Automation ICMA2000, September 27-29, 2000, Osaka, Japan. p. 359-364

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  74. Published

    The use of linear model in design of electrohydraulic position servo system

    Virvalo, T., 1990, Pneu-Hidro '90, Miskolc Hungary, 28-30 August 1990. p. 10 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  75. Published

    Influence of position sensor resolution on accuracy of pneumatic position servo

    Virvalo, T., 2007, Proceedings of the Fifth International Symposium on Fluid Power Transmission and Control, ISFP 2007, June 6-8, 2007, Beidaihe, China. p. 4 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  76. Published

    Comparing controllers in pneumatic cylinder motion control

    Virvalo, T. & Mäkinen, E., 2008, Proceedings of the 6th International Fluid Power Conference Dresden, Fluid Power in Motion, 6iFK, April 1.-2.2008, Dresden. p. 289-304

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  77. Published

    The influence of servo valve size on the performance of a pneumatic position servo

    Virvalo, T., 2001, Proceedings of the Fifth International Conference on Fluid Power Transmission and Control (ICFP´2001) April 3-5, 2001, Hangzhou, China. Lu, Y., Chen, Y. & Xu, L. (eds.). Kiina, p. 244-248

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  78. Published

    Designing position and velocity feedback loops when synchronizing four hydraulic cylinders

    Virvalo, T., Tuominen, P., Lehto, E. & Luomaranta, M., 1995, International Conference on Recent Advances in Mechatronics, Istanbul , Turkey, August 14-16. Istanbul, p. 985-989

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  79. Published

    Modelling pneumatic position servo realized with commercial components

    Virvalo, T., 1993, 2nd JHPS International Symposium on Fluid Power, Tokyo Japan, 6-9 September 1993. p. 6 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  80. Published

    Distributed motion control with independent actuators

    Virvalo, T. K. & Puusaari, P. K., 1991, Joint International Coference FAIM '91, Limerick, Ireland, 13-15 March '91,. p. 10 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  81. Published

    Closed loop control improves timber sawing process

    Virvalo, T., Inberg, J. & Lammila, M., 2005, Proceedings of the Ninth Scandinavian International Conference on Fluid Power, SICFP'05, June 1.-3, 2005, Linköping, Sweden. p. 12 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  82. Published

    Digitaalitekniikka hydraulisissa ja pneumaattisissa asemaservoissa

    Virvalo, T., 1989, Tampere: TTKK. 23 p. (Täydennyskoulutuskurssi: Hydraulisten ja pneumaattisten toimilaitteiden digitaalinen säätö, ohjelmointi ja ohjaus)

    Research output: Book/ReportCommissioned reportProfessional

  83. Published

    Motion and force control in water hydraulics

    Virvalo, T. & Mäkinen, E., 2000, Actionneurs hydrauliques: pourquoi pas l`eau?. p. 99-138

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  84. Published

    Pressure and position control with electropneumatic on/off-valves

    Virvalo, T., 1993, 3rd International Conference on Fluid Power Transmission and Control, Zhejiang University, Hangzhou, China, 13-16 September 1993. p. 6 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  85. Published

    Distributed motion control in hydraulics and pneumatics

    Virvalo, T. & Puusaari, P., 1990, Pneu-hidro '90, Miscolc Hungary, 28-30 August 1990. p. 8 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  86. Published

    Synchronizing of the movement of four cylinders

    Virvalo, T., 1995, Prooceedings of The Fourth Scandinavian International Conference on Fluid Power, September 26-29, Tampere, Finland. p. 133-146

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  87. Published

    The use of microcontroller in electropneumatic position servo system

    Virvalo, T., 1991, ISFP '91, Beijing China, 1991. p. 6 s.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  88. Published

    Hydraulic Motion Control - Robustness Against Inertia Load Changes

    Virvalo, T., 2002, Proceedings of the 5th JFPS International Symposium on Fluid Power, Nara 2002, November 14, 2002. Japan, p. 561-566

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  89. Published

    Hydraulinen paikoitus ohjelmoitavalla logiikalla

    Virvalo, T., 1991, In : Konepajamies. 10, p. s. 5

    Research output: Contribution to journalArticleProfessional

  90. Published

    On the damping of a pneumatic cylinder drive

    Virvalo, T., 1999, Proceedings of the 3rd International Symposium on Fluid Power Transmission and Control, September 7-9, 1999, Harbin, China. p. 472-477

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  91. Published

    Improving energy utilization in hydraulic booms - what it is all about

    Virvalo, T. & Sun, W., 2005, Proceedings of the Sixth International Conference on Fluid Power Transmission and Control, ICFP'2005, April 5-8, Hangzhou, China. Lu, Y. (ed.). p. 55-65

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  92. Published

    Control of the independent intelligent actuator

    Virvalo, T. & Puusaari, P., 1989, First JHPS International Symposium on Fluid Power, Tokyo. Japani, p. 41-47

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  93. Published

    Compensating the influence of the piston position in pneumatic position servo - simulated results

    Virvalo, T., 1992, Fluidmechanismen 92, Olomouc, CSSR, 1992. p. 5 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  94. Published

    Ohjauksen ja säädön ero liikkeen toteutuksessa

    Virvalo, T. & Mäkinen, E., 2003, In : Hydrauliikka ja pneumatiikka asemaservon toteutuksessa, osa II. Hydraulisen asemaservon suunnittelu, Fluid Finland- lehti. 2, 1, p. 20-27

    Research output: Contribution to journalArticleScientificpeer-review

  95. Published

    Comparing different controllers of electropneumatic position servo

    Virvalo, T., 1996, Proceedings of the Third JHPS International Symposium on Fluid Power, Yokohama'96, 4-6 November 1996. Araki, K. (ed.). Tokyo, p. 151-156

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  96. Published

    Servo pneumatics versus on/off pneumatics-performance and energy consumption

    Virvalo, T. & Mäkinen, E., 2003, Proceedings of the 18th International Conference on Hydraulics and Pneumatics, Praha, 30.9-1.10.2003. Tiskárna DOT Domu techniky Ostrava, spol. s r.o.: Czech Mechanical Engineering Society in cooperation with VSB-Technical University of Ostrava, Faculty of Mechanical Engineering, Department of Control System and Instrumentation, p. 58-67

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  97. Published

    The use of linear model in design of electropneumatic servo system.

    Virvalo, T., 1991, 2nd International Conference on Fluid Power, Tampere Finland, 19-21 March 1991. p. 177-184

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  98. Published

    Distributed motion control

    Virvalo, T. & Puusaari, P., 1990, ISRAM '90, Canada, 18-20 July 1990. p. 6 s

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  99. Published

    Comparing different control strategies of timber sawing process

    Virvalo, T. & Inberg, J., 2005, Bath Workshop on Power Transmission and Motion Control (PTMC 2005), 7-9 September 2005. Johnston, D. N., Burrows, C. R. & Edge, K. A. (eds.). p. 59-74

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  100. Published

    The use of the linear model in the design of the pneumatic position servo

    Virvalo, T., 1989, In : Hydraulic Pneumatic Mechanical Power. June

    Research output: Contribution to journalArticleProfessional

Download list To download, please limit the number of search results to 1,000 or less.