Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. In memory of emeritus professor Kauko Aho : Muistokirjoitus emeritusprofessori Kauko Aho 14.9.1922-3.3.2009

    Lehtovaara, A., Verho, A. & Riitahuhta, A., 2009, In : Tribologia - Finnish Journal of Tribology. 28, 1-2, p. 3-4

    Research output: Contribution to journalArticleGeneral public

  2. Published

    Modelling and evaluation of the fretting fatigue cracking risk in smooth spherical contacts

    Lehtovaara, A., Rabb, R. & Pasanen, A., 2011, In : Tribology International. 44, 11, p. 1526-1534

    Research output: Contribution to journalArticleScientificpeer-review

  3. Published

    Introduction to contact modelling - Part 1

    Lehtovaara, A., 2010, Striking Surfaces, International Seminar on Wear Control, Tampere University of Technology, Tampere Wear Center, 20.10.2010. p. 14 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  4. Published

    A numerical model for the calculation of fretting fatique crack initiation for a smooth line contact

    Lehtovaara, A., Lönnqvist, C. & Mäntylä, A., 2010, In : Tribologia - Finnish Journal of Tribology. 29, 1, p. 7-16

    Research output: Contribution to journalArticleScientificpeer-review

  5. Published

    Modeling of temperature fields and residual stresses in an electron beam welded copper plate

    Leikko, J., Karvinen, R., Taskinen, P. & Salonen, T., 2011, Proceedings of 6th Baltic Heat Transfer Conference - BHTC2011, August 24-26 2011, Tampere Finland. Karvinen, R. & Lindstedt, M. (eds.). Tampere: Tampere University of Technology, p. 1-12 12 p. (Baltic Heat Transfer Conference BHTC).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  6. Published

    Urban Eco-Factory compatibility of residential and industrial zones

    Leino, T., Salminen, K. & Joutsiniemi, A., 2011, The 6th International Conference on Industrial Ecology, ISIE 2011, 7-10 June, 2011, University of California, Berkeley, USA. Berkeley, CA: International Society for Industrial Ecology, p. 1-9 9 p. (International Conference on Industrial Ecology ISIE).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  7. Published

    Collaboration between design and production by exploiting VR/AR and PLM - case Metso Minerals

    Leino, S-P., Vehviläinen, M., Kiviranta, S., Mäkiranta, A., Nuutinen, P., Hokkanen, I., Multanen, P., Rantanen, P., Heikkilä, J. & Martikainen, T., 2010, Proceedings of the 3rd International Conference on Applied Human Factors and Ergonomics (AHFE), 17-20 July 2010, Miami, Florida, USA. Karwowski, W. & Salvendy, G. (eds.). p. 1-11 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  8. Published

    State of the art of virtual engineering based human-machine system lifecycle knowledge transfer and management

    Leino, S-P. & Riitahuhta, A., 2012, Proceedings of the 9th International Symposium on Tools and Methods of Competitive Engineering, TMCE 2012, 7-11 May, 2012, Karlsruhe, Germany. Imre, H., Zoltan, R., Albert, A. & Mathias, B. (eds.). Delft, Netherlands: Delft University of Technology, p. 573-585 (International Symposium on Tools and Methods of Competitive Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  9. Published

    Sustainable manufacturing and eco-factories within sustainable industrial areas within fast growing eco-cities

    Leino, T., Salminen, K. & Joutsiniemi, A., 2011, 21st International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2011, 26-29 June, 2011, Taichung, Taiwan. Taichung: FAIM 2011, p. 747-754 (International Conference on Flexible Automation and Intelligent Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  10. Published

    Enhanced industrial maintenance work task planning by using virtual engineering tools and haptic user interfaces

    Leino, S-P., Lind, S., Poyade, M., Kiviranta, S., Multanen, P., Reyes-Lecuona, A., Mäkiranta, A. & Muhammad, A., 2009, In : Lecture Notes in Computer Science. 5622, p. 346-354

    Research output: Contribution to journalArticleScientificpeer-review

  11. Published

    Design for human - virtual engineering is a media for knowledge transfer

    Leino, S-P. & Pulkkinen, A., 2012, The 12th International Design Conference, DESIGN 2012, 21-24 May, 2012, Dubrovnik, Croatia. Dorian, M., Mario, S., Neven, P. & Nenad, B. (eds.). Zagreb: Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, p. 1507-1514 (International Design Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  12. Published

    Value of virtual prototyping - a strategic resource besed view

    Leino, S-P. S., Koivisto, T. & Riitahuhta, A., 2013, Proceedings of The 19th International Conference on Engineering Design ICED13, Design for Harmonies, Vol 4: Product, Service and Systems Design, 19th-22nd August 2013 Sungkyunkwan University Seoul, Korea. Lindemann, U., Venkataraman, S., Kim, Y. S., Lee, S. W., de Weck, O. & Hong, Y. S. (eds.). Scotland: The Design Society, p. 249-258 10 p. (International Conference on Engineering Design).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  13. Published
  14. Published

    Case study on engineering change management and digital manufacturing

    Leino, S-P., Jokinen, L., Anttila, J-P. & Pulkkinen, A., 2015, IFIP Advances in Information and Communication Technology. Springer New York LLC, Vol. 467. p. 591-600 10 p. (IFIP Advances in Information and Communication Technology; vol. 467).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  15. Published

    Role of VR throughout the life of low volume products towards digital extended enterprises

    Leino, S-P., Pulkkinen, A. & Anttila, J. P., 2017, Product Lifecycle Management and the Industry of the Future - 14th IFIP WG 5.1 International Conference, PLM 2017, Revised Selected Papers. Springer New York LLC, p. 404-415 12 p. (IFIP Advances in Information and Communication Technology; vol. 517).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  16. Published

    Modeling Fume Particle Dynamics and Deposition with Alkali Metal Chemistry in Kraft Recovery Boilers

    Leppänen, A., 9 Jan 2015, Tampere: Tampere University of Technology. 63 p. (Tampere University of Technology. Publication; vol. 1273)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  17. Published

    Effect of Temperature on Fume Formation and Deposition in Kraft Recovery Boilers - a Modeling Approach

    Leppänen, A., Tran, H., Välimäki, E. & Oksanen, A., 2014, 2014 International Chemical Recovery Conference, Proceedings - Volume 2. Nieminen, M. & Lampinen, P. (eds.). Suomen Soodakattilayhdistys, The Finnish Recovery Boiler Committee; TAPPI, p. 38-47 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  18. Published

    Study of Aerosols of Black Liquor Combustion

    Leppänen, A., Välimäki, E. & Oksanen, A., 2011, 11th International Conference on Energy for Clean Environment, 5-8 July 2011, Lisbon Portugal. Lisbon: Clean Air conference series, p. 1-11 11 p. (International Conference on Energy for Clean Environment).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  19. Published

    Modeling of Fine Particles and Alkali Metal Compounds in Kraft Recovery Boiler Furnace

    Leppänen, A., Välimäki, E. & Oksanen, A., 2011, The 2011 TAPPI PEERS Conference, 2-5 October 2011, Oregon Convention Center in Portland, Oregon USA. Norcross, GA: TAPPI, p. 1-8 8 p. (TAPPI PEERS Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  20. Published

    CFD-Modeling of Fume Formation in Kraft Recovery Boilers

    Leppänen, A., Välimäki, E., Oksanen, A. & Tran, H., 2012, TAPPI PEERS Conference Proceedings 14.-18.10.2012, Savannah, USA. TAPPI, (TAPPI PEERS Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  21. Published

    Numerical modeling of fine particle and deposit formation in a recovery boiler

    Leppänen, A., Tran, H., Taipale, R., Välimäki, E. & Oksanen, A., 1 Aug 2014, In : Fuel. 129, p. 45-53 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  22. Published

    CFD Based Modelling for Predicting Fouling and Corrosion in Kraft Recovery Boilers

    Leppänen, A., Välimäki, E. & Oksanen, A., 2011, 19th European Biomass Conference and Exhibition, 6-10 June 2011, Berlin Germany. Berlin: European Biomass Conference and Exhibition, p. 1033-1040 (European Biomass Conference and Exhibition).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  23. Published

    Modelling fume deposit growth in recovery boilers: effect of flue gas and deposit temperature

    Leppänen, A., Tran, H., Välimäki, E. & Oksanen, A., 2014, In : Journal of Science and Technology for Forest Products and Processes. 4, 1, p. 50-57 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  24. Published

    Simulation of ash-forming compounds in the kraft recovery boiler

    Leppänen, A., Välimäki, E. & Oksanen, A., 2015, 10th European Conference on Industrial Furnaces and Boilers. Porto, Portugal, 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  25. Published

    Soodakattilan käyttövarmuuden parantaminen tuhkayhdisteiden käyttäytymistä mallintamalla

    Leppänen, A. & Haaga, K., 2015, In : Promaint. 3/2015, p. 25-27 3 p.

    Research output: Contribution to journalArticleProfessional

  26. Published

    Improving Recovery Boiler Availability through Understanding Fume Behavior

    Leppänen, A. & Välimäki, E., 2015, TAPPI PEERS Conference Proceedings, October 25-28, 2015. Atlanta, Georgia: TAPPI, 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  27. Published

    Improving Recovery Boiler Availability through Understanding Fume Behavior

    Leppänen, A. & Välimäki, E., Mar 2016, In : TAPPI Journal. 15, 3, p. 187-193

    Research output: Contribution to journalArticleScientificpeer-review

  28. Published

    Path-Following Controller for 4WDs Hydraulic Heavy-Duty Field Robots with Nonlinear Internal Dynamics

    Liikanen, H., Aref, M. M., Oftadeh, R. & Mattila, J., 2019, In : IFAC-PapersOnLine. 52, 8, p. 375 - 380

    Research output: Contribution to journalArticleScientificpeer-review

  29. Published

    Effects of strain and strain rate on the abrasive wear behavior of high manganese austenitic steel

    Lindroos, M., Kuokkala, V-T., Lehtovaara, A. & Kivikytö-Reponen, P., 2013, In : Key Engineering Materials. 527, p. 211-216 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  30. Published

    Modeling and Optimization of Plate Fins and Plate Fin Heat Sinks

    Lindstedt, M., 2013, Tampere: Tampere University of Technology. 70 p. (Tampere University of Technology. Publication)

    Research output: Book/ReportDoctoral thesisMonograph

  31. Published

    Improvements of refiner performance using flow modeling and optimization

    Lindstedt, M., Huhtanen, J-P. & Karvinen, R., 2011, Proceedings of IMPC, International Mechanical Pulping Conference 2011, Xi'an, P.R. of China, June 26-29, 2011. Zhang, M., Fang, G., Hay, G., Li, Z., Xu, Y., Lin, T. & Zhang, S. (eds.). Xi'an, P. R. of China: Pulp and Paper Technical Association of Canada; China Light Industry Press, p. 129-132 (International Mechanical Pulping Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  32. Published

    Optimization of isothermal fin arrays

    Lindstedt, M. & Karvinen, R., 2011, IWHT 2011, The International Workshop on Heat Transfer Advances for Energy Conservation and Pollution Control - 2011, Xi'an, Shaanxi, China, October 17-20, 2011. Xi'an, Shaanxi: Xi'an Jiaotong University, p. 1-7 7 p. (International Workshop on Heat Transfer Advances for Energy Conservation & Pollution Control; no. IWHT2011-067).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  33. Published

    Optimization of fin arrays

    Lindstedt, M. & Karvinen, R., 2011, Proceedings of 6th Baltic Heat Transfer Conference - BHTC2011, August 24-26 2011, Tampere Finland. Karvinen, R. & Lindstedt, M. (eds.). Tampere: Tampere University of Technology, p. 1-15 15 p. (Baltic Heat Transfer Conference BHTC).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  34. Published

    Optimal geometry of single fins and fin arrays

    Lindstedt, M. & Karvinen, R., 2013, Eurotherm Seminar No 96, Convective Heat Transfer Enhancement 17-18 September 2013, Royal Military Academy, Brussels, Belgium. Ecole Royale Militaire; von Karman Insitute for fluid dynamics; Universite de Valenciennes et du Hainaut-Cambresis, p. 1-6 6 p. 33

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  35. Published

    Conjugate heat transfer in a plate - One surface at constant temperature and the other cooled by forced or natural convection

    Lindstedt, M. & Karvinen, R., 2013, In : International Journal of Heat and Mass Transfer. 66, p. 489-495 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  36. Published

    Improvements to refiner performance with flow modeling and optimization

    Lindstedt, M., Huhtanen, J-P. & Karvinen, R., 2010, 7th International Seminar on Fundamental Mechanical Pulp Research (IFMPRS 2010), June 21-23, 2010, Nanjing, China. p. 202-210

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  37. Published

    Optimization of isothermal plate fin arrays with laminar forced convection

    Lindstedt, M. & Karvinen, R., 2012, In : Journal of Enhanced Heat Transfer. 19, 6, p. 535-547

    Research output: Contribution to journalArticleScientificpeer-review

  38. Published

    Optimization of Plate Fin Arrays with Laminar and Turbulent Forced Convection

    Lindstedt, M. & Karvinen, R., 2012, In : Journal of Physics: Conference Series. 395, p. 1-8 8 p., 012059.

    Research output: Contribution to journalArticleScientificpeer-review

  39. Published

    Optimal Shapes of Straight Fins and Finned Heat Sinks

    Lindstedt, M., Lampio, K. & Karvinen, R., Jun 2015, In : Journal of Heat Transfer: Transactions of the ASME. 137, 6, 8 p., 061006.

    Research output: Contribution to journalArticleScientificpeer-review

  40. Published

    Optimal control of pump rotational speed in filling and emptying a reservoir: minimum energy consumption with fixed time

    Lindstedt, M. & Karvinen, R., Dec 2016, In : Energy Efficiency. 9, 6, p. 1461–1474 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  41. Published

    Conjugated heat transfer from a uniformly heated plate and a plate fin with uniform base heat flux

    Lindstedt, M. & Karvinen, R., Apr 2017, In : International Journal of Heat and Mass Transfer. 107, p. 89-95 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  42. Published

    Internal and external stakeholders’ impact on product development curriculum design

    Lindsten, H., Auvinen, P. & Juuti, T., 12 Sep 2019, DS 95: Proceedings of the 21st International Conference on Engineering and Product Design Education (E&PDE 2019), University of Strathclyde, Glasgow. 12th -13th September 2019. The Design Society

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  43. Published

    Fundamentals of Digital Microhydraulic

    Linjama, M., 2012, Proceedings of the 8th International Fluid Power Conference, Dresden, March 26-28, 2012. Dresden: Technische Universität Dresden, Institute of Fluid Power, p. 385-396 (International Fluid Power Conference; vol. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  44. Published

    Hydraulic hybrids

    Linjama, M., 2011, GIM - Generic Intelligent Machines, The 4th GIM Scientific Workshop, January 18-19, 2011, Tampere University of Technology, Tampere, Finland. Tampere: Tampere University of Technology, p. 1-1 1 p. (GIM Scientific Workshop; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  45. Published

    Digital fluid power - state of the art

    Linjama, M., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Sairala, H. & Koskinen, K. T. (eds.). Tampere: Scandinavian International Conference on Fluid Power, p. 331-354 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  46. Published

    Hydrauliikan aika ei ole ohi - The time of hydraulics is not over

    Linjama, M., 2012, In : Fluid Finland. 11, 2, p. 10-12

    Research output: Contribution to journalArticleProfessional

  47. Published

    Digitaalihydrauliikan seminaarin satoa Tampereella

    Linjama, M., 2013, In : Fluid Finland. 12, 1, p. 8-8 1 p.

    Research output: Contribution to journalArticleProfessional

  48. Published

    Digitaalihydrauliikka tulee!

    Linjama, M., 2010, In : Metsäalan ammattilehti. 5, p. 88-89

    Research output: Contribution to journalArticleProfessional

  49. Published

    Matkaraportti: Digitaalihydrauliikan seminaari marraskuisessa Linzissä

    Linjama, M., 2010, In : Fluid Finland. 1/2010, p. 12-14

    Research output: Contribution to journalArticleScientific

  50. Published

    Laitteisto, ohjauspiiri ja menetelmä paineen ja tilavuusvirran tuottamiseksi

    Linjama, M., Tammisto, J., Huhtala, K. & Vilenius, M., 2010, Patent No. Pat. FI 121090 B, Priority date 30 Jun 2010, Priority No. (21) FI 20085242

    Research output: PatentScientific

  51. Published

    Discussion: Is the future of fluid power digital? Response

    Linjama, M., Scheidl, R. & Schmidt, S., 2012, In : Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering. 226, I6, p. 726-727

    Research output: Contribution to journalArticleScientific

  52. Published

    Modelling of flow characteristics of on/off valves

    Linjama, M., Huova, M. & Karvonen, M., 2012, DFP 12, Proceedings of the fifth workshop on digital fluid power, October 24-25, 2012, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). Tampere: Tampere University of Technology, Department of Intelligent Hydraulics and Automation, p. 209-222 (Workshop on digital fluid power).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  53. Published

    Model-based pressure control with digital valve system

    Linjama, M. & Lahtinen, J., 2011, The Fourth Workshop on Digital Fluid Power, 21st-22nd November, 2011, Linz, Austria. Linz: DFP-Workshops, p. 26-38 (Workshop on Digital Fluid Power; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  54. Published

    Digital hydraulic power management system - towards lossless hydraulics

    Linjama, M. & Huhtala, K., 2010, Proceedings of the Third Workshop on Digital Fluid Power, October 13-14 2010, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). p. 5-22

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  55. Published

    Mechatronic design of digital hydraulic micro valve package

    Linjama, M., Paloniitty, M., Tiainen, L. & Huhtala, K., 2014, The Second International Conference on Dynamics and Vibroacoustics of Machines, September 15-17, 2014, Samara, Russia. p. 610-617 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  56. Published

    High-Performance Digital Hydraulic Tracking Control of a Mobile Boom Mockup

    Linjama, M., Huova, M., Karhu, O. & Huhtala, K., Mar 2016, 10th International Fluid Power Conference (10. IFK) . Dresden, Vol. 1. 12 p. A-1

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  57. Published

    On the numerical solution of steady-state equations of digital hydraulic valve-actuator system

    Linjama, M., 24 May 2016, Proceedings of the eighth workshop on digital fluid power. Uusi-Heikkilä, J. & Linjama, M. (eds.). Tampere: Tampere University of Technology, p. 141-155

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  58. Published

    Energy efficient tracking control of a mobile machine boom mockup

    Linjama, M., Huova, M., Karhu, O. & Huhtala, K., 24 May 2016, Proceedings of the eighth workshop on digital fluid power. Uusi-Heikkilä, J. & Linjama, M. (eds.). Tampere: Tampere University of Technology, p. 265-275

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  59. Published

    Model-based force and position tracking control of an asymmetric cylinder with a digital hydraulic valve

    Linjama, M., Huova, M. & Huhtala, K., 1 Sep 2016, In : International Journal of Fluid Power. 17, 3, p. 163-172

    Research output: Contribution to journalArticleScientificpeer-review

  60. Published

    Model-based force and position tracking control of a multi-pressure hydraulic cylinder

    Linjama, M. & Huova, M., Jan 2018, In : Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering. 232, 3, p. 324-335

    Research output: Contribution to journalArticleScientificpeer-review

  61. Published

    Switching control of a water hydraulic cylinder with slow parallel-connected on/off valves

    Linjama, M., Grönholm, J. & Paloniitty, M., 28 Feb 2019, The 10th Workshop on Digital Fluid Power : February 28th-March 1st, 2019, Linz, Austria. Linz Center of Mechatronics, 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  62. Published

    Running-in effects on friction of journal bearings under slow sliding speeds

    Linjamaa, A., Lehtovaara, A., Kallio, M. & Léger, A., 2019, In : Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology.

    Research output: Contribution to journalArticleScientificpeer-review

  63. Published

    Validity of parameters in static linear testing of flexor tendon repair

    Linnanmäki, L., Göransson, H., Havulinna, J., Sippola, P., Karjalainen, T. & Leppänen, O. V., 2016, In : Journal of Biomechanics. 49, 13, p. 2785–2790

    Research output: Contribution to journalArticleScientificpeer-review

  64. Published

    Gap Formation During Cyclic Testing of Flexor Tendon Repair

    Linnanmäki, L., Göransson, H., Havulinna, J., Sippola, P., Karjalainen, T. & Leppänen, O. V., Jun 2018, In : Journal of Hand Surgery. 43, 6, p. 570.e1-570.e8

    Research output: Contribution to journalArticleScientificpeer-review

  65. Published

    Formal validation of discrete automation systems applying structural reasoning and general unary hypothesis automaton methods

    Lobov, A., 2008, Tampere: Tampere University of Technology. 121 p. (Tampereen teknillinen yliopisto. Julkaisu; vol. 782)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  66. Published

    Smart manufacturing systems: climbing the DIKW pyramid

    Lobov, A., 2018, IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society : 21-23 Oct. 2018, D.C., DC, USA. IEEE, p. 4730-4735 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  67. Published

    Capability of the turret punch press process: Intelligence between design and manufacturing

    Lohtander, M., Järvenpää, E. & Varis, J., 2013, 2013 IEEE International Symposium of Assembly and Manufacturing (ISAM), July 30th – Aug 2nd 2013, Xi’an, China. Piscataway: Institute of Electrical and Electronics Engineers IEEE, p. 180-182 3 p. (International Symposium on Assembly and Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  68. Published

    Micro Manufacturing Unit and the Corresponding 3D-Model for the Digital Twin

    Lohtander, M., Garcia, E., Lanz, M., Volotinen, J., Ratava, J. & Kaakkunen, J., 2018, In : Procedia Manufacturing. 17, p. 55-61

    Research output: Contribution to journalArticleScientificpeer-review

  69. Published

    Improved Real-Time Stability Assessment of Grid-Connected Converters Using MIMO-Identification Methods

    Luhtala, R., Reinikka, T., Roinila, T., Messo, T. & Sihvo, J., 6 Dec 2018, The 10th Annual IEEE Energy Conversion Congress and Exposition (ECCE 2018): September 23 – 27, 2018, Portland, Oregon, USA . IEEE, p. 5322-5329 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  70. Method and apparatus for mechanical defibration of wood

    Lukander, M., Björkqvist, T. & Tuovinen, O., 2014, Patent No. Pat. CA 2608207 C, Priority date 25 Mar 2014, Priority No. 2005//06/03 US 60/686,919 : 686919

    Research output: PatentScientific

  71. Published

    Evaluating the confidence level of prognostic predictions

    Lumme, V. & Pylvänen, M., 2012, 2012 IEEE Conference on Prognostics and Health Management PHM, 18-21 June 2012, Denver, CO, USA. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, p. 1-6 6 p. (IEEE International Conference on Prognostics and Health Management).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  72. Published

    Principles of Classification

    Lumme, V., 2013, Diagnostics and Prognostics of Engineering Systems: Methods and Techniques. Seifedine, K. (ed.). IGI Global, p. 55-73 19 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  73. Published

    Diagnosis of multi-descriptor condition monitoring data

    Lumme, V., 2011, 2011 IEEE Conference on Prognostics and Health Management PHM, 20.-23.6.2011, Denver, CO, USA. Piscataway, NJ: IEEE, p. 1-10 10 p. 6024327. (IEEE Conference on Prognostics and Health Management PHM).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  74. Published

    Hermetic room temperature glass welding technology

    Lundén, H., Kumpulainen, T., Määttänen, A. & Vihinen, J., 2014, 2014 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2014 June 15-18, 2014, Washington, DC, USA. Nano Science and Technology Institute, p. 13-16 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  75. Published

    Novel glass welding technique for hermetic encapsulation

    Lundén, H., Kumpulainen, T., Määttänen, A. & Vihinen, J., 2014, 5th Electronics System-Integration Technology Conference, ESTC 2014, September 16-18, 2014, Helsinki, Finland. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, p. 1-4 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  76. Published

    Divertor cassette locking system remote handling trials with WHMAN at DTP2

    Lyytikäinen, V., Kinnunen, P., Koivumäki, J., Mattila, J., Siuko, M., Esque, S. & Palmer, J., 2013, In : Fusion Engineering and Design. 88, 9-10, p. 2181-2185 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  77. Published

    Precise online auto-focus system in high speed laser micromachining applications

    Määttänen, A., Hautala, V. & Vihinen, J., 2012, In : Physics Procedia. 39, p. 807-813

    Research output: Contribution to journalArticleScientificpeer-review

  78. Published

    A use case analysis method for the implementation of service-oriented solutions for monitoring and diagnostics

    Macchi, M., Fumagalli, L., Garetti, M., Tavola, G., Checcozzo, R., Rusina, F., Vidales Ramos, A., Jokinen, J., Popescu, C., Martinez Lastra, J., Karhumäki, O. & Vainio, M., 2011, Proceedings of the 24th International Congress on Condition Monitoring and Diagnostic Engineering Management, COMADEM 2011, Advances in Industrial Asset Integrity Management, 30 May-1 June 2011, Stavanger, Norway. Singh, M., Rao, R. B. K. N. & Liyanage, J. P. (eds.). Stavanger: COMADEM International, p. 406-413 (International Congress on Condition Monitoring and Diagnostic Engineering Management COMADEM).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  79. Published

    Using maintenance data for extended warranty simulation

    Mahlamäki, K., Jokinen, J., Borgman, J., Niemi, A. & Rämänen, J., 2015, COMADEM 2014, Implications of life cycle analysis in asset and maintenance management, 16-18 September 2014, Brisbane Convention and Exhibition Centre, Australia. 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  80. Published

    Importance of maintenance data quality in extended warranty simulation

    Mahlamäki, K., Niemi, A., Jokinen, J. & Borgman, J., 1 Jan 2016, In : International Journal of COMADEM. 19, 1, p. 3-10 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  81. Published

    A performance evaluation concept for production systems in an SME network

    Mahmood, K., Lanz, M., Toivonen, V. & Otto, T., 27 Jun 2018, In : Procedia CIRP. 72, p. 603-608 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  82. Published

    Configurator module to integrate different protocols for IoT solution

    Mahmoodpour, M., Lobov, A. & Lanz, M., Jul 2018, 2018 IEEE 16th International Conference on Industrial Informatics (INDIN): 18-20 July 2018, Porto, Portugal. IEEE, p. 67-73 7 p. (IEEE INTERNATIONAL CONFERENCE ON INDUSTRIAL INFORMATICS).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  83. Published

    Role-based visualization of industrial IoT-based systems

    Mahmoodpour, M., Lobov, A., Lanz, M., Mäkelä, P. & Rundas, N., 27 Aug 2018, 2018 14th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications, MESA 2018. IEEE, 8 p. 8449183

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  84. Published

    IoT-Based senses for Virtual Enterprises

    Mahmoodpour, M., Mahmood, K. & Lobov, A., 2018, IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society : 21-23 Oct. 2018, D.C., DC, USA. IEEE, p. 4181-4186 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  85. Published

    High surface quality welding of aluminum using adjustable ring-mode fiber laser

    Maina, M. R., Okamoto, Y., Okada, A., Närhi, M., Kangastupa, J. & Vihinen, J., 1 Aug 2018, In : Journal of Materials Processing Technology. 258, p. 180-188 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  86. Published

    Production as a key factor for driving competitiveness in manufacturing industry

    Majuri, M., Tapaninaho, M., Tuokko, R. & Torvinen, S., 2014, Proceedings of the 24th International Conference on Flexible Automation and Intelligent Manufacturing, FAIM2014, 20th -23rd May, San Antonio, Texas, USA. Chen, F. F. (ed.). Lancaster, Pennsylvia: DEStech Publications, p. 209-214 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  87. Published

    Towards real agility in supply networks - The A-NET vision

    Majuri, M., Perälä, T., Pesonen, J. & Tuokko, R., 2012, The 22nd International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2012, 10-13 June, 2012, Helsinki, Finland. Hasse, N., Satu, K., Ville, T. & Seppo, T. (eds.). Tampere: Tampere University of Technology. Department of Production Engineering, p. 593-600 (International Conference on Flexible Automation and Intelligent Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  88. Published

    Collaborative Innovation Capabilities of SME Network

    Majuri, M., Halme, J., Kopra, M-J. & Nylund, H., 2015, Proceedings of the 25th international conference on flexible automation and intelligent manufacturing: FAIM2015, 23rd-26th June, 2015 Wolverhampton, UK. Vol. Vol. 2. p. 404-409 6 p. 175

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  89. Published

    Analysis of Inter-firm Co-operation in Joint Research and Development Projects

    Majuri, M., Nylund, H. & Lanz, M., 1 Sep 2016, Advances in Production Management Systems: Initiatives for a Sustainable World - IFIP WG 5.7 International Conference, APMS 2016, Revised Selected Papers. p. 536-543 8 p. (IFIP Advances in Information and Communication Technology).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  90. Published

    Social capital characteristics in RD project networks

    Majuri, M. & Lanz, M., 4 Oct 2018, 2018 Portland International Conference on Management of Engineering and Technology (PICMET). IEEE, 8481775

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  91. Published

    Teknillisen mekaniikan verkkosivusto opetuksen apuna

    Mäkelä, A. & Marjamäki, H., 2012, Proceedings of the 11th Finnish Mechanics Days. XI Suomen Mekaniikkapäivät, Oulun yliopisto 29.-30.11.2012. Hannu, K. & Mikko, M. (eds.). Oulu: Oulun yliopisto, p. 203-208 (Finnish Mechanics Days. Suomen Mekaniikkapäivät).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  92. Published

    Virtuaalinen konelaboratorio työkonejärjestelmien opetukseen: Lihaako -projekti. Smart Simulators -tutkimusryhmä

    Mäkelä, T., Nurmi, J., Punki, J., Ranta, P., Tebest, T., Leino, T., Palonen, T., Helminen, M., Markkula, M. & Koskinen, K. T., 2010

    Research output: Artistic and non-textual formSoftwareScientific

  93. Published

    Roll-to-roll coating by liquid flame spray nanoparticle deposition

    Mäkelä, J. M., Haapanen, J., Aromaa, M., Teisala, H., Tuominen, M., Stepien, M., Saarinen, J. J., Toivakka, M. & Kuusipalo, J., 2015, Materials Research Society Symposium Proceedings. MATERIALS RESEARCH SOCIETY, Vol. 1747. p. 37-42 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  94. Published

    Modeling and Experimental Characterization of Pressure Drop in Gravity-Driven Microfluidic Systems

    Mäki, A-J., Hemmilä, S., Hirvonen, J., Narra Girish, N., Kreutzer, J., Hyttinen, J. & Kallio, P., 1 Feb 2015, In : Journal of Fluids Engineering: Transactions of the ASME. 137, 2, p. 1-8 8 p., 021105.

    Research output: Contribution to journalArticleScientificpeer-review

  95. Published

    Implementation of a direct procedure for critical point computations

    Mäkinen, J., Kouhia, R., Fedoroff, A. & Marjamäki, H., 2010, Proceedings of The Tenth International Conference on Computational Structures Technology, 14-17 September, 2010, Valencia, Spain. Topping, B. H. V., Adam, J. M., Pallares, F. J., Bru, R. & Romero, M. L. (eds.). p. 1-13 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  96. Published

    On computing critical equilibrium points by direct method

    Mäkinen, J., Kouhia, R. & Ylinen, A., 2010, Proceedings of NSCM-23: the 23td Nordic Seminar on Computational Mechanics, NSCM-23, 21-22 October 2010, Stockholm, Sweden. Eriksson, A. & Tibert, G. (eds.). p. 271-274

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  97. Published

    Modeling coupled hydraulic-driven multibody systems using finite element method

    Mäkinen, J. M. A., Pertola, P. S. & Marjamäki, H. U., 2010, The 1st Joint International Conference on Multibody System Dynamics, May 25-27, 2010, Lappeenranta, Finland. p. 1-10 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  98. Published

    Collapse Simulations of Flexible Multibody Systems

    Mäkinen, J., 2011, Proceedings of the 24th Nordic Seminar on Computational Mechanics. Aalto University publication series. SCIENCE + TECHNOLOGY. Freund, J. & Kouhia, R. (eds.). Espoo: Aalto University, p. 221-222 (Nordic Seminar on Computational Mechanics; vol. 23/2011).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  99. Published

    Direct computation of critical equilibrium states for spatial beams and frames

    Mäkinen, J., Kouhia, R., Fedoroff, A. & Marjamäki, H., 2012, In : International Journal for Numerical Methods in Engineering. 89, 2, p. 135-153

    Research output: Contribution to journalArticleScientificpeer-review

  100. Published

    Geometrically exact beam formulation versus absolute nodal coordinate formulation

    Mäkinen, J. & Matikainen, M., 2010, The 1st Joint International Conference on Multibody System Dynamics, May 25-27, 2010, Lappeenranta, Finland. p. 1-10 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Previous 1...3 4 5 6 7 8 9 10 ...13 Next
Download list To download, please limit the number of search results to 1,000 or less.