Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. Published

    Geometrically exact beam formulation versus absolute nodal coordinate formulation

    Mäkinen, J. & Matikainen, M., 2010, The 1st Joint International Conference on Multibody System Dynamics, May 25-27, 2010, Lappeenranta, Finland. p. 1-10 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  2. Published

    Digital Hydraulics Applied Research - Marine Hydraulics

    Mäkinen, E., Kukkonen, S. & Perukangas, M., 2014, Tampere: FIMECC Oy. 3 p. (FIMECC Publications Series; no. 2)

    Research output: Book/ReportCommissioned reportProfessional

  3. Published

    Concept design of the cassette toroidal mover

    Mäkinen, H., Järvenpää, J., Valkama, P., Väyrynen, J., Amjad, F., Siuko, M., Mattila, J., Semeraro, L. & Esque, S., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 2092-2095

    Research output: Contribution to journalArticleScientificpeer-review

  4. Published

    Paineiskumallin soveltuminen sydän-verisuonistoyhdistelmälle

    Mäkinen, J., Huotari, M. & Ylinen, A., 2012, Proceedings of the 11th Finnish Mechanics Days. XI Suomen Mekaniikkapäivät, Oulun yliopisto 29.-30.11.2012. Hannu, K. & Mikko, M. (eds.). Oulu: Oulun yliopisto, p. 191-195 (Finnish Mechanics Days. Suomen Mekaniikkapäivät).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  5. Accepted/In press

    Application of simultaneous localization and mapping for large-scale manipulators in unknown environments

    Mäkinen, P., M. Aref, M., Mattila, J. & Launis, S., Nov 2019, (Accepted/In press) The 9th IEEE International Conference on Cybernetics and Intelligent Systems (CIS) and the 9th IEEE International Conference on Robotics, Automation and Mechatronics (RAM): 18-20 November, 2019, Bangkok, Thailand. IEEE, 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  6. Published

    Enhanced mobile machine assembly and maintainability evaluation using virtual and augmented reality

    Mäkiranta, A., Nuutinen, P., Multanen, P., Hyvönen, M., Leino, S-P., Kiviranta, S. & Vehviläinen, M., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Tampere: Scandinavian International Conference on Fluid Power, p. 295-304 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  7. Published

    Safety of interactive robotics - Learning from accidents

    Malm, T., Viitaniemi, J., Latokartano, J., Lind, S., Venho-Ahonen, O. & Schabel, J., 2010, In : International Journal of Social Robotics. 2, 3, p. 221-227

    Research output: Contribution to journalArticleScientificpeer-review

  8. Published

    Method for evaluating the value of technology in the manufacturing industry

    Mämmelä, J., Juuti, T., Julkunen, P., Lemmetty, P. & Pakkanen, J., 2020, The 13th World Congress on Engineering assets and public infrastructures in the age of digitalization, WCEAM: 24th-26th September 2018, Stavanger, Norway.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  9. Published

    Technology Value Mapping (TVM) : Method for Designing Technology Value Capture by Visually Modelling Product Properties and Behaviours

    Mämmelä, J., 12 Dec 2019, Tampere University. 71 p. (Tampere University Dissertations; vol. 188)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  10. Published

    The effects of laser welding on the heterogeneous immunoassay performance in a microfluidic cartridge

    Mäntymaa, A., Halme, J., Välimaa, L. & Kallio, P., 2010, Proceedings of the 2nd European Conference on Microfluidics - Microfluidics 2010, Toulouse, December 8-10, 2010. p. 1-7 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  11. Published

    The Effects of Laser Welding on the Heterogeneous Immunoassay Performance in a Microfluidic Cartridge

    Mäntymaa, A., Halme, J., Välimaa, L. & Kallio, P., 2011, In : Biomicrofluidics. 5, 4, p. 1-11 11 p., 046504.

    Research output: Contribution to journalArticleScientificpeer-review

  12. Published

    An experimental and numerical study of the dynamic Brazilian disc test on Kuru granite

    Mardoukhi, A., Saksala, T., Hokka, M. & Kuokkala, V-T., 2015, Proceedings of the XII Finnish Mechanics Day. p. 210-215 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  13. Published

    A Macro-Micro Controller for Pallet Picking by an Articulated-frame-steering Hydraulic Mobile Machine

    M. Aref, M., Ghabcheloo, R. & Mattila, J., 2014, 2014 IEEE International Conference on Robotics and Automation (ICRA), May 31 - June 7, 2014, Hong Kong, China. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, p. 6816-6822 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  14. Published

    Vision-Guided Autonomous Forklift

    M. Aref, M., Ghabcheloo, R., Kolu, A. & Mattila, J., 29 Nov 2016, Proceedings of the 25th Conference on Robotics in Alpe-Adria-Danube Region (RAAD). Rodić, A. & Borangiu, T. (eds.). Springer International Publishing, p. 338-346 8 p. (Advances in Intelligent Systems and Computing; vol. 540).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  15. Published

    Industrial applications of holonic and multi-agent systems, 6th International Conference HoloMAS 2013 , Prague, Czech Republic, August 26-28, 2013 Proceedings

    Marik, V. (ed.), Martinez Lastra, J. L. (ed.) & Skobelev, P. (ed.), 2013, Heidelberg: Springer. 2 p. (Lecture Notes in Computer Science; vol. 8062)

    Research output: Book/ReportAnthologyScientificpeer-review

  16. Published

    Non-linear finite element modelling of a test system for a maintenance robot

    Marjamäki, H., Mäkinen, J. & Pertola, P., 2010, Proceedings of The Tenth International Conference on Computational Structures Technology, 14-17 September, 2010, Valencia, Spain. Topping, B. H. V., Adam, J. M., Pallares, F. J., Bru, R. & Romero, M. L. (eds.). p. 1-13 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  17. Published

    Utilization of the hydraulic engineering design information for semi-automatic simulation model generation

    Markkula, M., Rokala, M., Palonen, T., Alarotu, V., Helminen, M., Koskinen, K. T., Salonen, J., Nykänen, O., Ranta, P. & Pohjolainen, S., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Sairala, H. & Koskinen, K. T. (eds.). Tampere: Scandinavian International Conference on Fluid Power, p. 443-458 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  18. Published

    Augmented reality aiding collimator exchange at the LHC

    Martinez, H., Fabry, T., Laukkanen, S., Mattila, J. & Tabourot, L., 2014, In : Nuclear instruments and Methods in Physics Research Section A: Accelerators Spectrometers Detectors and Associated Equipment. 763, p. 354-363 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  19. Published

    A New Hybrid Approach for Augmented Reality Maintenance in Scientific Facilities

    Martinez, H., Laukkanen, S. & Mattila, J., 2013, In : international Journal of Advanced Robotic Systems. 10, p. 1-10 10 p., 321.

    Research output: Contribution to journalArticleScientificpeer-review

  20. Published

    Domain ontologies for reasoning machines in factory automation

    Martinez Lastra, J. L., Delamer, I. M. & Ubis, F., 2010, USA: International Society of Automation (ISA). 138 p.

    Research output: Book/ReportBookProfessional

  21. Published

    UX 1 system design - A robotic system for underwater mining exploration

    Martins, A., Almeida, J., Almeida, C., Dias, A., Dias, N., Aaltonen, J., Heininen, A., Koskinen, K., Rossi, C., Dominguez, S., Vörös, C., Henley, S., McLoughlin, M., van Moerkerk, H., Tweedie, J., Bodo, B., Zajzon, N. & Silba, E., 5 Oct 2018, 2018 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS): October, 1-5, 2018, Madrid, Spain. IEEE, p. 1494-1500 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  22. Published

    EFDA goal oriented training in remote handling - GOTRH

    Mattila, J., Alho, P., Väyrynen, J., Sibois, R. & Salminen, K., 2012, VALTION TEKNILLINEN TUTKIMUSKESKUS. 3 p. (VTT Science; vol. 7)

    Research output: Book/ReportCommissioned reportProfessional

  23. Published

    Software development and modelling of the CMM system

    Mattila, J., 2008, Espoo: VTT. 2 p. (VTT Publications; vol. 678)

    Research output: Book/ReportCommissioned reportProfessional

  24. Published

    Development of DTP2 subsystems and tooling in support of remote handling trials

    Mattila, J., 2008, Espoo: VTT. 7 p. (VTT Publications; vol. 678)

    Research output: Book/ReportCommissioned reportProfessional

  25. Published

    Implementation of a DTP2 safety system for testing, and final CMM/SCEE integration and commissioning

    Mattila, J. & Järvenpää, J., 2009, VTT. 3 p. (VTT Publications; vol. 709)

    Research output: Book/ReportCommissioned reportProfessional

  26. Published

    Implementation of a DTP2 safety system for testing, and final CMM/SCEE integration and commissioning

    Mattila, J. & Järvenpää, J., 2008, Espoo: VTT. 3 p. (VTT Publications; vol. 678)

    Research output: Book/ReportCommissioned reportProfessional

  27. Published

    EFDA quality assurance exercise

    Mattila, J. & Järvenpää, J., 2008, Espoo: VTT. 2 p. (VTT Publications; vol. 678)

    Research output: Book/ReportCommissioned reportProfessional

  28. Published

    Guest editorial introduction to the focused section on design and control of hydraulic robots

    Mattila, J., Semini, C., Moon, H., Buchli, J., Hyon, S., Li, P. Y. & Yao, B., 1 Apr 2017, In : IEEE - ASME Transactions on Mechatronics. 22, 2, p. 585-588 4 p.

    Research output: Contribution to journalEditorialScientific

  29. Published

    Creativity from design and Iinnovation perspectives

    Medyna, G., Coatanea, E., Christophe, F., Bakhouya, M., Choulier, D. & Forest, J., 5 Aug 2018, Encyclopedia of creativity, invention, innovation and entrepreneurship. Springer, 8 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  30. Published

    Stability Analysis of Two Time Delays in Cylindrical Grinding Machine by D-subdivion Method

    Mehmood, F., Yuan, L., Järvenpää, V-M. & Heshmatimanesh, F., 2013, Proceedings in Research Conference in Technical Disciplines, RCITD 2013, 18.-22. November 2013, Slovak Republic. Mokrys, M., Badura, S. & Lieskovsky, A. (eds.). Zilina: EDIS, p. 53-57 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  31. Published

    Mixed Variable Formulations for Truss Topology Optimization

    Mela, K., 2013, Tampere: Tampere University of Technology. 132 p. (Tampere University of Technology. Publication; no. 1134)

    Research output: Book/ReportDoctoral thesisMonograph

  32. Published

    On the equivalence of minimum compliance and stress-constrained minimum weight design of trusses under multiple loading conditions

    Mela, K. & Koski, J., 2012, In : Structural and Multidisciplinary Optimization. 46, 5, p. 679-691

    Research output: Contribution to journalArticleScientificpeer-review

  33. Published

    Multicriterion approach to minimum compliance topology optimization of trusses with comparison to stress-constrained minimum weight design

    Mela, K. & Koski, J., 2010, Advances and Trends in Structural Engineering, Mechanics and Computation. Zingoni, A. (ed.). p. 1081-1084

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  34. Published

    Multicriterion Compliance Minimization and Stress-constrained Minimum Weight Design of a Three-bar Truss

    Mela, K., 2011, Tampere University of Technology. 40 p. (Tampere University of Technology, Department of Mechanics and Design. Research Report; vol. 2)

    Research output: Book/ReportCommissioned reportProfessional

  35. Published

    Information management challenges and enabling factors for utilizing virtual product builds

    Mela, J., Järvenpää, E., Velez, R., Lehtonen, T. & Riitahuhta, A., 2010, The 7th International Conference on Product Lifecycle Management, PLM 10, 12-14 July, 2010, BIBA University of Bremen, Germany. Bremen: BIBA-Bremen Institut Für Produktion und Logistik GmbH, p. 15 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  36. Published

    Koneiden vikaantumismekanismit

    Miettinen, J., 2011, Kuntoon perustuva kunnossapito ja kunnonvalvonta, 23.-24.11.2011, Tampere. Kunnossapitoyhdistys ProMaint, p. 1-13 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  37. Published

    Full-Field-menetelmä käänteisessä monitoroinnissa

    Miettinen, J. & Ojala, P., 2012, In : Promaint. 26, 5, p. 34-38

    Research output: Contribution to journalArticleProfessional

  38. Published

    Voiteluaineen vaihdon vaikutus

    Miettinen, J., 2010, Värähtelyklinikka 2010, Kunnonvalvonnan uudistaminen, Kunnossapitoyhdistys, 14.-16.4.2010, Silja Symphony, Helsinki-Tukholma-Helsinki. p. 1-9 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  39. Published

    Värähtelymittauksen perusteet

    Miettinen, J., 2011, Kuntoon perustuva kunnossapito ja kunnonvalvonta, 23.-24.11.2011, Tampere. Kunnossapitoyhdistys ProMaint, p. 1-13 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  40. Published

    Nopeutettu elinkaaren määritys, Tampereen teknillisen yliopiston NEM-projekti

    Miettinen, J., 10 Mar 2016, In : Koneviesti. 2016, 4, p. 44-45 2 p.

    Research output: Contribution to journalArticleProfessional

  41. Published

    Jet pump performance in liquid and gas pumping

    Mikkonen, A. & Karvinen, R., 2014, MFIP13, 13th International conference on multiphase flow in industrial plants, Mediterrean Foundation, Sestri Levante (Genova), Italy, 17-19 September 2014. Genova: Italian association of industrial plant enginnering; University of Genova Polytechnic school; Iltalian association of chemical engineering, p. 1-11 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  42. Published

    Solar Panel Breakage During Heavy Rain Caused by Thermal Stress

    Mikkonen, A. & Karvinen, R., Oct 2016, Engineered Transparency 2016: Glass in Architechture and Structural Engineering. Wiley

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  43. Published

    Heat Transfer of Impinging Jet: Effect of Compressibility and Turbulent Kinetic Energy Production

    Mikkonen, A. & Karvinen, R., 2017, IX International Conference on Computational Heat and Mass Transfer (ICCHMT 2016) .

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  44. Published

    Levynmuovauksen teemapäivä - Steel forum 2017

    Minkkinen, A., Vuorio, T. & Peura, P., Apr 2018, In : Ohutlevy-lehti. 2018, 1, p. 13-16 4 p.

    Research output: Contribution to journalArticleProfessional

  45. Published

    Novel fusion welding technology of Si/glass using ultrashort laser pulses with high pulse repetition rates

    Miyamoto, I., Okamoto, Y., Hansen, A., Amberla, T., Vihinen, J. & Kangastupa, J., 2012, Proceedings of the 31st International Congress on Applications of Lasers & Electro-optics, ICALEO 2012, 23-27 September, 2012, Anaheim, California, USA. Laser Institute of America, p. 784-793 M402. (International Congress on Applications of Lasers & Electro-optics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  46. Published

    High speed, high strength microwelding of Si/glass using ps-laser pulses

    Miyamoto, I., Okamoto, Y., Hansen, A., Vihinen, J., Amberla, T. & Kangastupa, J., 9 Feb 2015, In : Optics Express. 23, 3, p. 3427-3439 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  47. Published

    Image Based Local Strain Measurement of Wood

    Moilanen, C. S., Saarenrinne, P., Engberg, B. A. & Björkqvist, T., 2014, Advancement of Optical Methods in Experimental Mechanics Volume 3, Conference Proceedings of the Society for Experimental Mechanics Series. Jin, H., Sciammarella, C., Yoshida, S. & Lamberti, L. (eds.). Berlin: Springer, p. 339-345 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  48. Published

    Radial compression behavior of Norway spruce at high strain-rate

    Moilanen, C., Björkqvist, T., Saarenrinne, P., Engberg, B. A. & Salminen, L., 2013, 8th International Fundamental Mechanical Pulp Research Seminar, 29 - 31 January, 2013, Åre, Sweden. p. 10-11 2 p. (International Fundamental Mechanical Pulp Research Seminar).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  49. Published

    Local compression behaviour of pre-fatigued and chemically pre-treated wood at high strain rate and high temperature

    Moilanen, C., Engberg, B. A. K., Björkqvist, T., Salminen, L. & Saarenrinne, P., 2014, International Mechanical Pulping Conference, IMPC 2014, 2-5 June 2014, Helsinki, Finland, PULPAPER 2014, 3-5 June, 2014, Helsinki, Finland. AEL, p. 1-4 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  50. Published

    Image-Based Stress and Strain Measurement of Wood in the Split-Hopkinson Pressure Bar

    Moilanen, C. S., Saarenrinne, P., Engberg, B. A. & Björkqvist, T., 2015, In : Measurement Science and Technology. 26, 8, 085206.

    Research output: Contribution to journalArticleScientificpeer-review

  51. Published

    Compression model for radial compression of Norway spruce earlywood and latewood

    Moilanen, C., Björkqvist, T. & Saarenrinne, P., 19 May 2015, 9th International Mechanical Pulping Research Seminar. Trondheim, Norway

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  52. Published

    Wood compression model for radial compression of earlywood and latewood

    Moilanen, C., Björkqvist, T. & Saarenrinne, P., 2015, Proceedings of the XII Finnish Mechanics Days. Rakenteiden Mekaniikan Seura ry, p. 261-266 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  53. Published

    Modelling and Simulation of Radial Spruce Compression to Optimize Energy Efficiency in Mechanical Pulping

    Moilanen, C., Björkqvist, T., Ovaska, M., Koivisto, J., Miksic, A., Engberg, B., Salminen, L., Saarenrinne, P. & Alava, M., 26 Sep 2016, 2016 International Mechanical Pulping (IMPC) Conference Proceedings, Monday, September 26 - Wednesday, September 28, Jacksonville, Florida, USA. USA: TAPPI, p. 53-70 18 p. 1.3

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  54. Published

    Influence of strain rate, temperature and fatigue on the radial compression behaviour of Norway spruce

    Moilanen, C., Björkqvist, T., Ovaska, M., Koivisto, J., Miksic, A., Engberg, B. A., Salminen, L. I., Saarenrinne, P. & Alava, M., 27 Jun 2017, In : Holzforschung. 71, 6, p. 505-514 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  55. Published

    Image based analysis and modelling of Norway spruce compression

    Moilanen, C., 15 Nov 2017, Tampere University of Technology. 56 p. (Tampere University of Technology. Publication; vol. 1505)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  56. Published

    A Network based modelling approach using the dimensional analysis conceptual modeling (DACM) framework for additive manufacturing technologies

    Mokhtarian, H., Coatanea, E., Paris, H., Ritola, T., Ellman, A., Vihinen, J., Koskinen, K. & Ikkala, K., 21 Aug 2016, Proceedings of the ASME 2016 Computers and Information in Engineering Conference IDETC/CIE 2016. Charlotte, North Carolina : ASME, 9 p. DETC2016-60473

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  57. Published

    Function modeling combined with physics-based reasoning for assessing design options and supporting innovative ideation

    Mokhtarian, H., Coatanea, E. & Paris, H., 2017, In : AI EDAM - Artificial Intelligence for Engineering Design Analysis and Manufacturing. 31, 4, p. 476-500 25 p.

    Research output: Contribution to journalArticleScientificpeer-review

  58. Published

    Toward Developing Surrogate Model Integrating Multi-physics, Multi-criteria Models for Additive Manufacturing Technologies

    Mokhtarian, H., Coatanea, E., Paris, H., Vihinen, J., Ikkala, K. & Kiviö, J., Oct 2016, Proceedings of the 1st Annual SMACC Research Seminar 2016. p. 40-42

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  59. Published

    A conceptual design and modeling framework for integrated additive manufacturing

    Mokhtarian, H., Coatanea, E., Paris, H., Mansor Mbow, M., Pourroy, F., René Marin, P., Vihinen, J. & Ellman, A., 28 Apr 2018, In : Journal of Mechanical Design. 140, 8, 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  60. Published

    Identification of fundamental requirements for ideal metamodeling framework in additive manufacturing

    Mokhtarian, H., Coatanea, E., Paris, H. & Vihinen, J., 2017, Proceedings of the 2nd Annual SMACC Research Seminar 2017. Aaltonen, J., Virkkunen, R., Koskinen, K. T. & Kuivanen, R. (eds.). p. 29-31 3 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  61. Published

    Product-Process Integrated Meta-Modeling Using a Graph-Based Approach: Application to Additive Manufacturing

    Mokhtarian, H., 27 Mar 2019, Tampere University. 154 p. (Tampere University Dissertations; vol. 36)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  62. Published

    Probabilistic Modelling of Defects in Additive Manufacturing: A Case Study in Powder Bed Fusion Technology

    Mokhtarian, H., Hamedi, A., Nagarajan, H., Panicker, S., Coatanea, E. & Haapala, K., 31 Dec 2018, 52nd CIRP Conference on Manufacturing Systems. Elsevier, p. 956-961 (Procedia CIRP; vol. 81).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  63. Published

    Exploring additive manufacturing design space using bayesian network: a case study on reducing curling defect

    Mokhtarian, H., Hamedi, A. & Coatanea, E., 11 Dec 2018, NAFEMS 2018: Exploring the Design Freedom of Additive Manufacturing through Simulation: 10-11 Dec. 2018, Helsinki. Helsinki, Finland

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  64. Published

    Design-optimization of cylindrical, layered composite structures using efficient laminate parameterization

    Mönicke, A., Katajisto, H., Leroy, M., Petermann, N., Kere, P. & Perillo, M., 2012, 12th European Conference on Spacecraft Structures, Materials and Environmental Testing, Noordwijk, the Netherlands, 20-23 March, 2012. ESA SP. European Space Agency, p. 1-6 6 p. (ESA - SP; vol. 691).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  65. Published

    Filtering scheme for context-aware fog computing in cyber-physical systems

    Mononen, T., M. Aref, M. & Mattila, J., 2018, 14th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications (MESA): 2-4 July 2018, Oulu.. Oulu: IEEE, 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  66. Published

    Analysis of the Effects of Path Properties on Autonomous Motion Control of a Hydraulic Tracked Vehicle

    Mononen, T., Aref, M. M. & Mattila, J., Nov 2018, 2018 25th International Conference on Mechatronics and Machine Vision in Practice (M2VIP). IEEE, 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  67. Published

    Liikenteen kiitollisuudenvelka

    Montonen, J., 2013, In : Pikajalka. 13, 27, p. 3-3 1 p.

    Research output: Contribution to journalArticleGeneral public

  68. Published

    Polkupyörä on rock!

    Montonen, J., 2013, In : Pikajalka. 13, 24, p. 3-3 1 p.

    Research output: Contribution to journalArticleGeneral public

  69. Published

    Mopoiluni on manifesti

    Montonen, J., 2013, In : Pikajalka. 13, 26, p. 3-3 1 p.

    Research output: Contribution to journalArticleGeneral public

  70. Published

    Dynamics of single-hit pneumatic test drill for pulse-shaping analysis of impacting waves

    Montonen, J., Keskinen, E., Cotsaftis, M., Miettinen, J. & Seemann, W., 2013, Proceedings of the ASME 2013 International Mechanical Engineering Congress and Exposition, IMECE2013, November 15-21, 2013, San Diego, California, USA. ASME, p. 1-7 7 p. 64835. (ASME International Mechanical Engineerig Congress and Exposition).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  71. Published

    Synchronization to wirelessly teleoperate a hydraulic skid steered mobile machine from control station

    Moya, J. & Huhtala, K., 2009, Seventh IEEE International Conference on Control and Automation ICCA 2009, December 9-11, 2009, New Zealand. p. 1992-1996

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  72. Published

    Impedance control of redundant manipulators

    Muhammad, A. & Vilenius, M., 2010, Proceedings of the 6th FPNI - PhD Symposium West Lafayette 2010, June 15-19 2010, Indiana, USA. Ivantysynova, M. (ed.). p. 153-163

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  73. Published

    Development of water hydraulic manipulator for the remote handling of heavy duty components

    Muhammad, A., Valkama, P., Siuko, M., Mattila, J. & Vilenius, M., 2010, 7th International Fluid Power Conference (7th IFK), 22-24 March 2010, Aachen, Germany. p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  74. Published

    Advantage of redundancy in the controllability of remote handling manipulator

    Muhammad, A., Mattila, J., Vilenius, M., Siuko, M. & Semeraro, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 1882-1885

    Research output: Contribution to journalArticleScientificpeer-review

  75. Published

    Energy efficiency in double disc chip refining; Influence of intensity by segment design

    Muhic, D., Huhtanen, J-P., Sundström, L., Sandberg, C., Ullmar, M., Vuorio, P. & Engstrand, P., 2010, 7th International Seminar on Fundamental Mechanical Pulp Research (IFMPRS 2010), June 21-23, 2010, Nanjing, China. p. 109-117 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  76. Published

    Energy efficiency in double disc refining - Influence of intensity by segment design

    Muhic, D., Huhtanen, J-P., Sundström, L., Sandberg, C., Ullmar, M., Vuorio, P. & Engstrand, P., 2011, In : Nordic Pulp and Paper Research Journal. 3, p. 1-8 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  77. Published

    Automaattinen öljyn epäpuhtauksien mittaus ja keskeiset standardit

    Multanen, P., Niiranen, E., Elo, L. & Rinkinen, J., 2014, PAMAS 2014 Käyttäjäpäivä, 4.2.2014, Tampereen teknillinen yliopisto, Tampere. Rinkinen, J., Multanen, P., Elo, L. & Niiranen, E. (eds.). Tampere: Tampereen teknillinen yliopisto, p. 43-70 28 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  78. Published

    Utilization of R&D Simulators to Support the Maintenance of Mobile Work Machines

    Multanen, P. & Hyvönen, M., 2011, The Eight International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 20-22 June 2011, Cardiff, Wales. Northamption: British Institute of Non-destructive Testing, p. 1263-1274 (International Conference on Condition Monitoring and Machinery Failure Prevention Technologies; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  79. Published

    Production of sulfonated polyetheretherketone/polypropylene fibers for photoactive textiles

    Mylläri, V., Fatarella, E., Ruzzante, M., Pogni, R., Baratto, M. C., Skrifvars, M., Syrjälä, S. & Järvelä, P., 1 Oct 2015, In : Journal of Applied Polymer Science. 132, 39, 42595.

    Research output: Contribution to journalArticleScientificpeer-review

  80. Published

    A comparison of rheology and FTIR in the study of polypropylene and polystyrene photodegradation

    Mylläri, V., Ruoko, T-P. & Syrjälä, S., 1 Jul 2015, In : Journal of Applied Polymer Science. 132, 28, 6 p., 42246.

    Research output: Contribution to journalArticleScientificpeer-review

  81. Published

    Knowledge-based optimization of artificial neural network topology for process modeling of fused deposition modeling

    Nagarajan, H., Jafarian, H., Hamedi, A., Mokhtarian, H., Prod'hon, R., Tilouche, S., Coatanea, E. & Nenchev, V., 2018, Proceedings of the ASME 2018 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2018): Volume 4: 23rd Design for Manufacturing and the Life Cycle Conference; 12th International Conference on Micro- and Nanosystems. Aug. 26-29, 2018, Quebec City, Canada.. ASME International, Vol. 4. 12 p. DETC2018-86187

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  82. Published

    Knowledge-based optimization of artificial neural network topology for additive manufacturing process modeling: a case study for fused deposition modeling: A new approach and case study for fused deposition modeling

    Nagarajan, H. P. N., Mokhtarian, H., Jafarian, H., Dimassi, S., Bakrani Balani, S., Hamedi, A., Coatanea, E., Wang, G. G. & Kari R., H., Feb 2019, In : Journal of Mechanical Design. 141, 2

    Research output: Contribution to journalArticleScientificpeer-review

  83. Published

    Aligning product design methods and tools for sustainability

    Nahkala, S., 2013, Proceedings of the 20th CIRP, International Conference on life cycle engineering, Singapore, 17-19 April, 2013. Nee, A. Y. C., Song, B. & Ong, S-K. (eds.). Springer Singapore, p. 53-58 6 p. (Re-engineering manufacturing for sustainability).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  84. Published

    Reel-to-reel inline atmospheric plasma deposition of hydrophobic coatings

    Nättinen, K., Nikkola, J., Minkkinen, H., Heikkilä, P., Lavonen, J-P. & Tuominen, M., 2011, In : Journal of Coatings Technology and Research. 8, 2, p. 235-245

    Research output: Contribution to journalArticleScientificpeer-review

  85. Published

    A builder for adaptable human machine interfaces for mobile devices

    Neira, O., Nieto Lee, A., Martinez Lastra, J. L. & Camp, R. S., 2013, Proceedings 2013 11the IEEE international conference on industrial informatics INDIN, Bochum, Germany, July 29-31, 2013. Piscataway: Institute of Electrical and Electronics Engineers IEEE, p. 750-755 6 p. (IEEE international conference on industrial informatics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  86. Published

    Competence needs and a model for the teaching strategy development of mechanical designers in product development

    Nevaranta, J., 31 Oct 2014, Tampere: Tampere University of Technology. 141 p. (Tampere University of Technology, Publication; vol. 1245)

    Research output: Book/ReportDoctoral thesisMonograph

  87. Published

    Availability modeling approach for future circular colliders based on the LHC operation experience

    Niemi, A., Apollonio, A., Gutleber, J., Sollander, P., Penttinen, J-P. & Virtanen, S., 2016, In : Physical Review Special Topics: Accelerators and Beams. 19, 12, 121003.

    Research output: Contribution to journalArticleScientificpeer-review

  88. Published

    Modeling Future Hadron Colliders’ Availability for Physics

    Niemi, A., 17 Apr 2019, Tampere University. 130 p. (Tampere University Dissertations; vol. 48)

    Research output: Book/ReportDoctoral thesisMonograph

  89. Published

    Parallel pump-controlled multi-chamber cylinder

    Niemi-Pynttäri, O., Linjama, M., Laamanen, A. & Huhtala, K., 2014, ASME/BATH 2014 Symposium on Fluid Power and Motion Control, FPMC2014, September 10-12, 2014, Bath, United Kingdom. The American Society of Mechanical Engineers ASME, p. 1-9 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  90. Published

    Data aggregation at field device level for industrial ambient monitoring using web services

    Nieto Lee, A. & Martinez Lastra, J. L., 2011, IEEE 9th International Conference on Industrial Informatics, INDIN 2011, 26-29 July, 2011, Caparica, Lisbon, Portugal. Piscataway, NJ: IEEE, p. 491-496 (International Conference on Industrial Informatics INDIN).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  91. Published

    Enhancement of industrial monitoring systems by utilizing context awareness

    Nieto Lee, A. & Martinez Lastra, J. L., 2013, 3rd IEEE International Multi-Disciplinary Conference on Cognitive Methods in Situation Awareness and Decision Support (CogSIMA), February 26-28, 2013, San Diego, CA, USA. Piscataway: Institute of Electrical and Electronics Engineers, IEEE, p. 277-284 8 p. (IEEE International Multi-Disciplinary Conference on Cognitive Methods in Situation Awareness and Decision Support).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  92. Published

    Pro-active content managing system for efficient human machine interaction in data intensive environments

    Nieto Lee, A. N., Evchina, Y., Dvoryanchikova, A. & Martinez Lastra, J. L., 2013, Proceedings 2013 11th IEEE international conference on industrial informatics INDIN, Bochum, Germany, July 29-31, 2013. Piscataway: Institute of Electrical and Electronics Engineers IEEE, p. 790-796 6 p. (IEEE international conference on industrial informatics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  93. Published

    The cross-sectional area of the gluteus maximus muscle varies according to habitual exercise loading: Implications for activity-related and evolutionary studies

    Niinimäki, S., Härkönen, L., Nikander, R., Abe, S., Knüsel, C. & Sievänen, H., 2016, In : HOMO: Journal of Comparative Human Biology. 67, 2, p. 125-137

    Research output: Contribution to journalArticleScientificpeer-review

  94. Published

    On the orientation probability distribution of flexible fibres in a contracting channel flow

    Niskanen, H., Eloranta, H., Tuomela, J. & Hämäläinen, J., 2011, In : International Journal of Multiphase Flow. 37, 4, p. 336-345

    Research output: Contribution to journalArticleScientificpeer-review

  95. Published

    Clustering Analysis for Secondary Breaking Using a Low-Cost Time-of-Flight Camera

    Niu, L., Aref, M. M. & Mattila, J., Nov 2018, 2018 Ninth International Conference on Intelligent Control and Information Processing (ICICIP). IEEE, p. 318-324 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  96. Published

    Complex elevator system DSM-case for a DSM design sprint

    Niutanen, V., Hölttä-Otto, K., Rahardjo, A., Stowe, H. M., Helo, P. & Pulkkinen, A., 2017, Understand, Innovate, and Manage your Complex System! - Proceedings of the 19th International DSM Conference. The Design Society, p. 259-264 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  97. Published

    Dynamics of a True Moving Bed separation process: Linear model identification and advanced process control

    Nogueira, I. B. R., Ribeiro, A. M., Martins, M. A. F., Rodrigues, A. E., Koivisto, H. & Loureiro, J. M., 30 Jun 2017, In : Journal of Chromatography A. 1504

    Research output: Contribution to journalArticleScientificpeer-review

  98. Published

    Micro-electromechanical System Sensors in Unscented Kalman Filter-based Condition Monitoring of Hydraulic Systems

    Nurmi, J., Honkakorpi, J., Vihonen, J. & Mattila, J., 2013, 2013 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, July 9-12, 2013, Wollongong, Australia, AIM 2013 Conference Digest, Mechatronics for Human Wellbeing. IEEE; ASME, p. 354-361 (IEEE/ASME International Conference on Advanced Intelligent Mechatronics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  99. Published

    Detection and isolation of faults in mobile hydraulic valves based on a reduced-order model and adaptive thresholds

    Nurmi, J. & Mattila, J., 2013, Proceedings of ASME/BATH 2013 Symposium on Fluid Power and Motion Control, FPMC2013, October 6-9, 2013, Sarasota, Florida. Sarasota, Florida, USA: ASME, p. 1-10 10 p. (Symposium on Fluid Power and Motion Control).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  100. Published

    Applications and business models for micro and desktop production systems

    Nurmi, A., Heikkilä, R. & Tuokko, R., 2012, Proceedings of the 8th International Workshop on Microfactories, IWMF 2012, 18-20 June, 2012, Tampere Hall, Tampere, Finland. Reijo, T., Minna, L. & Pasi, L. (eds.). Tampere: Tampere University of Technology, p. 1-10 10 p. (International Workshop on MicroFactories).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Previous 1...4 5 6 7 8 9 10 11 ...13 Next
Download list To download, please limit the number of search results to 1,000 or less.