Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. Published

    Tempering of thin glass

    Aronen, A. & Karvinen, R., 2012, Glass. Facade. Energy. Engineered transparency; International conference at glasstec, 25.10.2012 - 26.10.2012, Dusseldorf, Germany. Schneider, J. & Weller, B. (eds.). Technische Universität Darmstadt; Technische Univärsität Dresden; www.engineered-transparency.eu, p. 145-153 (Engineered transparency).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  2. Published

    Mechanical Glass Tempering - Present Products and Future Challenges

    Aronen, A. & Karvinen, R., 2011, GPD Glass Performance Days 2011, 12th International Conference on Architectural and Automotive Glass, 17-20 June 2011, Tampere, Finland. Vitkala, J. (ed.). Tampere: International Conference on Architectural and Automotive Glass, p. 122-125 (International Conference on Architectural and Automotive Glass GPD Glass Performance Days).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  3. Published

    Modeling of deformations and stresses during glass tempering

    Aronen, A. & Karvinen, R., 2011, ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE2011, November 11-17, 2011, Denver, Colorado, USA. New York, NY: ASME, p. 1-9 9 p. (ASME International Mechanical Engineering Congress and Exposition IMECE2011).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  4. Published

    Effect of asymmetric heat transfer on glass deformations

    Aronen, A., 2010, Conference on Architectural and Structural Applications of Glass Faculty of Architecture, Challenging Glass 2, Delft University of Technology, 20-21 May 2010, the Netherlands. Bos, F., Louter, C. & Veer, F. (eds.). p. 279-285

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  5. Published

    Effect of glass temperature before cooling and cooling rate on residual stresses in tempering

    Aronen, A. & Karvinen, R., Mar 2018, In : Glass Structures Engineering. 3, 1, p. 3-15

    Research output: Contribution to journalArticleScientificpeer-review

  6. Published

    Automated control system for indoor air quality management

    Aslam, Z., Khalid, W., Ahmed, T. & Marghoob, D., 1 Nov 2017, 2017 International Conference on Energy Conservation and Efficiency (ICECE). IEEE, p. 85-88 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  7. Published

    Standard development of ANSI/IPC-2546 Am2. ANSI/IPC-2546 Am2: Sectional Requirements for Shop-Floor Equipment Communication Messages (CAMX) for Printed Circuit Board Assembly. Amendment 2 - Dispensing Equipment, Reflow Equipment and Final Assembly and Packaging sections

    Aube, S., Baggio, T., Breche, J., Burmeister, C., Camargo, J., Dugenske, A. D., Fraser, A., Hyvärinen, J., Karhumäki, O., Ludwig, E., Morris, D. J., Niemi, T., Ronkainen, H., Rubow, B., Siltala, N., Urho, M. & Voitus, R., 2005, Bannockburn, IL: ANSI/IPC. 124 p.

    Research output: Book/ReportBookScientificpeer-review

  8. Published

    Remote support for maintenance tasks by the use of Augmented Reality: the ManuVAR project

    Azpiazu, J., Siltanen, S., Multanen, P., Mäkiranta, A., Barrena, N., Diez, A., Agirre, J. & Smith, T., 2011, Proceedings of the 9th Congress on Virtual Reality Applications, CARVI 2011. San Sebastian: Tecnalia, p. 1-6 6 p. (Congress on Virtual Reality Applications CARVI; vol. 9).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  9. Published

    IHA-machine: a future mobile machine

    Backas, J., Ahopelto, M., Huova, M., Vuohijoki, A., Karhu, O., Ghabcheloo, R. & Huhtala, K., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Tampere: Scandinavian International Conference on Fluid Power, p. 161-176 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  10. Published

    Modelling the efficiencies of hydraulic pumps with neural networks

    Backas, J. & Huhtala, K., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Sairala, H. & Koskinen, K. T. (eds.). Tampere: Scandinavian International Conference on Fluid Power, p. 11-24 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  11. Published

    Fuel optimal controller for hydrostatic drives: A simulation study and model validation

    Backas, J., Ghabcheloo, R., Hyvönen, M. & Huhtala, K., 2014, ASME/BATH 2014 Symposium on Fluid Power and Motion Control, FPMC2014, September 10-12, 2014, Bath, United Kingdom. The American Society of Mechanical Engineers ASME, p. 1-11 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  12. Published

    Research of optimizing the prime mover and hydraulics of mobile machines

    Backas, J., 2011, GIM - Generic Intelligent Machines, The 4th GIM Scientific Workshop, January 18-19, 2011, Tampere University of Technology, Tampere, Finland. Tampere: Tampere University of Technology, p. 1-5 5 p. (GIM Scientific Workshop; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  13. Published

    An Optimal Controller for Hydrostatic Drives

    Backas, J., 2012, GIM - Generic Intelligent Machines, Proceedings of the 6th GIM Scientific Workshop, November 7-8, 2012, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). Tampere: Tampere University of Technology. Department of Intelligent Hydraulics and Automation, p. 83-88 (Generic Intelligent Machines Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  14. Published

    Gain Scheduling Full State Feedback with D-Implementation for Velocity Tracking of Hydrostatic Drive Transmission

    Backas, J., Ghabcheloo, R. & Huhtala, K., 2015, Proceedings of the Fourteenth Scandinavian International Conference on Fluid Power, SICFP15. May 20-22, 2015. Tampere, Finland. Tampere University of Technology. Department of Intelligent Hydraulics and Automation, p. 64-75 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  15. Published

    Gain scheduled state feedback velocity control of hydrostatic drive transmissions

    Backas, J., Ghabcheloo, R. & Huhtala, K., Jan 2017, In : Control Engineering Practice. 58, p. 214-224

    Research output: Contribution to journalArticleScientificpeer-review

  16. Published

    Nonlinear model predictive energy management of hydrostatic drive transmissions

    Backas, J. & Ghabcheloo, R., 1 Mar 2019, In : Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering. 233, 3, p. 335-347

    Research output: Contribution to journalArticleScientificpeer-review

  17. Published

    Is what you see really what you get? - Case study of virtual prototyping in designing the production process

    Becker, I. & Toivonen, V., 2011, 22nd Symposium on Design for X, 11-12 October, 2011, Tutzing, Germany. Glasgow: The Design Society, p. 253-264 (Symposium on Design for X).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  18. Published

    Using virtual reality in designing the assembly process of a car

    Becker, I., Toivonen, V. & Leino, S-P., 2011, Proceedings of the 18th International Conference on Engineering Design, ICED 11, 15-18 August, 2011, Technical University of Denmark, Copenhagen, Denmark. Culley, S. J., Hicks, B. J., McAloone, T. C., Howard, T. J. & Clarkson, J. (eds.). Glasgow: The Design Society, p. 91-100 (International Conference on Engineering Design ICED; vol. 9).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  19. Published

    A Flow Model for Contract Car Manufacturing Project

    Becker, I., 18 Aug 2016, Tampere University of Technology. 141 p. (Tampere University of Technology. Publication; vol. 1397)

    Research output: Book/ReportDoctoral thesisMonograph

  20. Published

    Big data analytics for the Future Circular Collider reliability and availability studies

    Begy, V., Apollonio, A., Gutleber, J., Martin-Marquez, M., Niemi, A., Penttinen, J-P., Rogova, E., Romero-Marin, A. & Sollander, P., 23 Nov 2017, 22nd International Conference on Computing in High Energy and Nuclear Physics (CHEP2016). IOP Publishing, ( Journal of Physics: Conference Series; vol. 898).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  21. Published

    Magnetomechanical Coupled FE Simulations of Rotating Electrical Machines

    Belahceen, A., Fonteyn, K., Kouhia, R., Rasilo, P. & Arkkio, A., 2012, 15th International IGTE Symposium on Numerical Field Calculations in Electrical Engineering, 16-19.2012, Graz, Austria. Institut für Grundlagen und Theorie der Elektrotechnik - IGTE, Technische Universität Graz, Austria, p. 1-6 6 p. (International IGTE Symposium on Numerical Field Calculations in Electrical Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  22. Published

    Magnetomechanical coupled FE simulations of rotating electrical machines

    Belahcen, A., Fonteyn, K., Kouhia, R., Rasilo, P. & Arkkio, A., 2013, In : COMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic Engineering. 32, 5, p. 1484-1499 16 p., 17095978.

    Research output: Contribution to journalArticleScientificpeer-review

  23. Published

    A model for anisotropic magnetostriction

    Belahcen, A., Kouhia, R., Rasilo, P. & Ristinmaa, M., 2015, Proceedings of the XII Finnish Mechanics Days. Rakenteiden Mekaniikan Seura ry, p. 201-203 3 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  24. Published

    Prerequisites and conditions for socially sustainable manufacturing in Europe’s future factories—results overview from the SO SMART project

    Berlin, C., Barletta, I., Fantini, P., Georgoulias, K., Hansich, C., Lanz, M., Latokartano, J., Pinzone, M., Schönborn, G., Stahre, J., Taisch, M. & Tuokko, R., 2016, Advances in Ergonomics of Manufacturing: Managing the Enterprise of the Future - Proceedings of the AHFE International Conference on Human Aspects of Advanced Manufacturing, 2016. Springer Verlag, Vol. 490. p. 319-330 12 p. (Advances in Intelligent Systems and Computing; vol. 490).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  25. Published

    Discovering material recovery scenarios for industrial machinery: A case-based approach

    Bernstein, W. Z., Ramanujan, D., Koho, M., Zhao, F. & Ramani, K., 2012, ASME 2012 International Manufacturing Science and Engineering Conference (MSEC) collocated with the 40th North American Manufacturing Research Conference and in participation with the International Conference on Tribology Materials and Processing, Notre Dame, IN, USA, 4-8 June, 2012. ASME, p. 1097-1104 8 p. (ASME International Manufacturing Science and Engineering Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  26. Published

    Energy efficiency improvement through context sensitive self-learning of machine availability

    Bittencourt, J. L., Bonefeld, R., Scholze, S., Stokic, G., Uddin, M. K. & Martinez Lastra, J. L., 2011, IEEE 9th International Conference on Industrial Informatics, INDIN 2011, 26-29 July, 2011, Caparica, Lisbon, Portugal. Piscataway, NJ: IEEE, p. 93-98 (International Conference on Industrial Informatics INDIN).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  27. Published

    Local compression behaviour of moist wood at quasi static state

    Björkqvist, T., Moilanen, C., Saarenrinne, P., Koivisto, J., Miksic, A., Alava, M., Salminen, L. & Engberg, B. A., 2013, 8th International Fundamental Mechanical Pulp Research Seminar, 29 - 31 January, 2013, Åre, Sweden. p. 47-48 2 p. (International Fundamental Mechanical Pulp Research Seminar).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  28. Published

    A Method and an Apparatus for Producing Nanocellulose

    Björkqvist, T., Koskinen, T., Nuopponen, M., Vehniäinen, A. & Gustafsson, H., 18 Feb 2015, IPC No. D21H 11/ 18 A I, Patent No. EP2659061, Priority date 31 Dec 2010, Priority No. FI 20106402

    Research output: PatentScientific

  29. Published

    Method and an Apparatus for Producing Nanocellulose

    Björkqvist, T., Gustafsson, H., Koskinen, T., Nuopponen, M., Vehniäinen, A. & Gustafsson, S., 3 Feb 2015, IPC No. D21B 1/ 12 A I, Patent No. US8945346, Priority date 31 Dec 2010, Priority No. FI 20106402

    Research output: PatentScientific

  30. Published

    Analysis of Real-Time Properties of a Digital Hydraulic Power Management System

    Boström, P., Alexeev, P., Heikkilä, M., Huova, M., Waldén, M. & Linjama, M., 2014, 19th International Conference, FMICS 2014, Florence, Italy, September 11-12, 2014.. Springer International Publishing, p. 33-47 15 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  31. Published

    Development of Controllers Using Simulink and Contract-Based Design. Chapter 8

    Boström, P., Huova, M., Olszewska, M., Linjama, M., Heikkilä, M., Sere, K. & Walden, M., 2011, Dependability and Computer Engineering: Concepts for Software-Intensive Systems. Petre, L., Sere, K. & Troubitsyna, E. (eds.). Hershey, PA: IGI Global, p. 151-169

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  32. Published

    Verification and Validation of a Pressure Control Unit for Hydraulic Systems

    Boström, P., Heikkilä, M., Huova, M., Waldén, M. & Linjama, M., 2014, 6th International Workshop, SERENE 2014, Budapest, Hungary, October 15-16, 2014. Springer International Publishing, p. 101-115 15 p. (Lecture Notes in Computer Science; vol. 8785).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  33. Published

    Design synthesis: integrated product and manufacturing system design

    Britton, G. & Torvinen, S., 2014, CRC Press. 358 p.

    Research output: Book/ReportBookScientificpeer-review

  34. Published

    Implementing circulating oil lubrication systems based on the IMC-AESOP architecture

    Camp, R. & Lobov, A., 2014, Industrial cloud-based cyber-physical systems. The IMC-AESOP approach. Colombo, A. W., Bangemann, T., Karnouskos, S., Delsing, J., Stluka, P., Harrison, R., Jammes, F. & Martinez Lastra, J. L. (eds.). Springer, p. 183-202 20 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  35. Published

    Preliminary concept design of the divertor remote handling system for DEMO power plant

    Carfora, D., Di Gironimo, G., Järvenpää, J., Huhtala, K., Määttä, T. & Siuko, M., 2014, In : Fusion Engineering and Design. 89, 11, p. 2743-2747 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  36. Published

    Image Stitching Based Measurements of Medical Screws

    Cenev, Z., Prusi, T. & Tuokko, R., 2014, Precision Assembly Technologies and Systems. 7th IFIP WG 5.5 International Precision Assembly Seminar, IPAS 2014, Chamonix, France, February 16-18, 2014, Revised Selected Papers. Ratchev, S. (ed.). Springer Berlin Heidelberg, p. 69-78 10 p. (IFIP Advances in Information and Communication Technology; vol. 435).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  37. Published

    Comfort Design in Human Robot Cooperative Tasks

    Changizi, A., Dianatfar, M. & Lanz, M., 2019, Human Systems Engineering and Design - Proceedings of the 1st International Conference on Human Systems Engineering and Design IHSED2018: Future Trends and Applications. Springer Verlag, p. 521-526 6 p. (Advances in Intelligent Systems and Computing; vol. 876).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  38. Published

    The comfort zone concept in a human-robot cooperative task

    Changizi, A. & Lanz, M., 2019, Precision Assembly in the Digital Age - 8th IFIP WG 5.5 International Precision Assembly Seminar, IPAS 2018, Revised Selected Papers. Springer New York LLC, Vol. 530. p. 82-91 10 p. (IFIP Advances in Information and Communication Technology; vol. 530).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  39. Published

    Friction characteristics of a multi-chamber cylinder for digital hydraulics

    Cho, S. H., Niemi-Pynttäri, O. & Linjama, M., 2016, In : Proceedings of the institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science. 230, 5, p. 685-698 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  40. Published

    Minimizing the Maximum Curvature of Quadratic Bezier Curves with a Tetragonal Concave Polygonal Boundary Constraint

    Choi, J., Curry, R. E. & Elkaim, G. H., 2011, In : Computer-Aided Design. 44, 4, p. 1-22 22 p.

    Research output: Contribution to journalArticleScientificpeer-review

  41. Published

    Kinodynamic Motion Planning for Autonomous Vehicles

    Choi, J., 2014, In : international Journal of Advanced Robotic Systems. 11, 90, p. 1-14 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  42. Published

    A Potential Field and Bug Compound Navigation Algorithm for Nonholonomic Wheeled Robots

    Choi, J-W., 2012, ICIES2012, The 1st International Conference on Innovative Engineering, 7-9 December 2012, Alexandria, Egypt,. Institute of Electrical and Electronics Engineers IEEE, p. 166-171 6 p. (International Conference on Innovative Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  43. Published

    An Efficient Heuristic Estimate for Non-holonomic Motion Planning

    Choi, J-W., 2012, The 4th Workshop on Planning, Perception and Navigation for Intelligent Vehicles, October 7th, 2012 Vilamoura, Algarve, Portugal. p. 1-6 6 p. (Workshop on Planning, Perception and Navigation for Intelligent Vehicles).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  44. Published

    Constrained Path Optimization with Bézier Curve Primitives

    Choi, J-W. & Huhtala, K., 2014, 2014 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2014), September 14-18, 2014, Palmer House Hilton, Chicago, IL, USA. Institute of Electrical and Electronics Engineers IEEE, p. 246-251 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  45. Published

    A Potential Field and Bug Compound Navigation Algorithm for Nonholonomic Wheeled Robots

    Choi, J., 2011, Proceedings of the 5th GIM Scientific Workshop at Aalto University School of Electrical Engineering 29.-30.11.2011. Espoo: Aalto University, p. 62-70 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  46. Published

    A conceptual modeling and simulation framework for system Design

    Coatanea, E., Roca, R., Mokhtarian, H., Mokammel, F. & Ikkala, K., 1 Jul 2016, In : Computing in Science and Engineering. 18, 4, p. 42-52

    Research output: Contribution to journalArticleScientificpeer-review

  47. Published

    Dimensional analysis conceptual modeling supporting adaptable reasoning in simulation-based training

    Coatanea, E. & Roca, R., 7 Aug 2018, 2018 13th System of Systems Engineering Conference, SoSE 2018. IEEE, p. 245-252 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  48. Published

    Systematic search for design contradictions in systems' architecture: Toward a computer aided analysis

    Coatanéa, E., Nonsiri, S., Roca, R., Mokammel, F., Kruck, J. & Christophe, F., 6 Jun 2015, In : Journal of Integrated Design and Process Science. 19, 1, p. 25-46 22 p.

    Research output: Contribution to journalArticleScientificpeer-review

  49. Published

    Systematic Search and Ranking of Physical Contradictions Using Graph Theory Principles: Toward a Systematic Analysis of Design Strategies and their Impacts: TRIZ and Knowledge-Based Innovation in Science and Industry

    Coatanéa, E., Ryynänen, L., Calonius, O., Mokammel, F. & Riitahuhta, A., 2015, In : Procedia Engineering. 131, p. 1165-1182 18 p.

    Research output: Contribution to journalArticleScientificpeer-review

  50. Published

    Knowledge-based artificial neural network (KB-ANN) in engineering: Associating functional architecture modeling, dimensional analysis and causal graphs to produce optimized topologies for KB-ANNs

    Coatanéa, E., Wu, D., Tsarkov, V., Gary Wang, G., Modi, S. & Jafarian, H., 2018, 38th Computers and Information in Engineering Conference. The American Society of Mechanical Engineers ASME, Vol. 1B-2018. 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Previous 1 2 3 4 5 6 7 8 ...25 Next
Download list To download, please limit the number of search results to 1,000 or less.