Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. Published

    Hydraulic Cylinders

    Koskinen, K. T. & Aaltonen, J., 2013, Encyclopedia of Tribology. Wang, Q. J. & Chung, Y-W. (eds.). Springer US, p. 1709-1718 10 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  2. Published

    Department of Intelligent Hydraulics and Automation, Tampere University of Technology, Finland

    Koskinen, K. T., 2010, In : Journal of the Japan Fluid Power System Society. 41, 1, p. 35-40

    Research output: Contribution to journalArticleScientificpeer-review

  3. Published

    M1-teknologialla voidaan rakentaa virtuaalisia oppimisympäristöjä ja konelaboratorioita

    Koskinen, K. T., Leino, T., Palonen, T. & Ranta, P., 2010, In : Fluid Finland. 2/2010, p. 18-20

    Research output: Contribution to journalArticleScientific

  4. Published

    Peruskäyttöalue - metalliteollisuus

    Koskinen, K. T., 2014, In : Konstruktor. 4, p. 66-67 2 p.

    Research output: Contribution to journalArticleProfessional

  5. Published

    Water Hydraulics Pushes Into High-Pressure Systems

    Koskinen, K. T. & Aaltonen, J., 2014, In : Hydraulics & Pneumatics. 67, 2, p. 84-89 4 p.

    Research output: Contribution to journalArticleProfessional

  6. Published

    Water Hydraulic

    Koskinen, K. T. & Vilenius, M., 2011, Handbook of Hydraulic Fluid Technology. Totten, G. E. & De Negri, V. J. (eds.). Boca Raton,FL: CRC Press, p. 723-757

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  7. Published

    Proceedings of the 10th World Congress on Engineering Asset Management (WCEAM 2015)

    Koskinen, K. T. (ed.), Kortelainen, H. (ed.), Aaltonen, J. (ed.), Uusitalo, T. (ed.), Komonen, K. (ed.), Mathew, J. (ed.) & Laitinen, J. (ed.), 25 Mar 2016, Springer International Publishing. 686 p. (Lecture Notes in Mechanical Engineering)

    Research output: Book/ReportAnthologyScientificpeer-review

  8. Published

    On the solution of non-linear diffusion equation

    Kouhia, R., 2013, In : Rakenteiden mekaniikka. 46, 4, p. 116-130 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  9. Published

    Implementation of a direct procedure for critical point computations using preconditioned iterative solvers

    Kouhia, R., Tůma, M., Mäkinen, J., Fedoroff, A. & Marjamäki, H., Oct 2012, In : Computers & Structures. 108-109, p. 110-117 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  10. Published

    Katsaus mikropolaariseen kontinuumimalliin

    Kouhia, R., 2013, In : Rakenteiden mekaniikka. 46, 3, p. 70-90 21 p.

    Research output: Contribution to journalArticleScientificpeer-review

  11. Published

    Betonin ajasta riippumattomat materiaalimallit

    Kouhia, R., 2013, Unknown Publisher. 83 p. (Liikenneviraston tutkimuksia ja selvityksiä; no. 38)

    Research output: Book/ReportCommissioned reportProfessional

  12. Published

    On the numerical solution of a micropolar continuum model

    Kouhia, R. & Niemi, A. H., 2013, Proceedings of the 26th Nordic Seminar on Computational Mechanics, Oslo, 23 - 25 October, 2013. Logg, A., Mardal, K. A. & Massing, A. (eds.). Center for Biomedical Computing, Simula Research Laboratory, p. 128-131 4 p. (Nordic Seminar on Computational Mechanics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  13. Published

    Out-of-plane elastic buckling of truss beams

    Kouhia, R. & Fedoroff, A., 2013, In : Structural Engineering and Mechanics. 45, 5, p. 613-629 17 p.

    Research output: Contribution to journalArticleScientificpeer-review

  14. Published

    Some aspects on efficient solution of creep problems

    Kouhia, R., Marjamäki, P. & Kivilahti, J., 2015, In : Rakenteiden mekaniikka. 48, 4, p. 199-210 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  15. Published

    On optimisation of structures under stability constraints - a simple example

    Kouhia, R., Pajunen, S. & Poutala, J., 9 Dec 2016, In : Rakenteiden mekaniikka. 49, 2, p. 69-77 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  16. Published

    A unified lcf-hcf model based on continuum mechanics

    Kouhia, R., Holopainen, S., Ottosen, N. S., Matti, R. & Saksala, T., 2016. 4 p.

    Research output: Other conference contributionPaper, poster or abstractScientific

  17. Published

    Recognition of Operating States of Mobile Machine

    Krogerus, T., 2011, Proceedings of the 5th GIM Scientific Workshop at Aalto University School of Electrical Engineering 29.-30.11.2011. Espoo: Aalto University, p. 70-80 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  18. Published

    Sensitivity analysis of data analysis process in hydraulic forklift

    Krogerus, T., Rokala, M. & Koskinen, K. T., 2011, Proceedings of the 8th JFPS International Symposium on Fluid Power, Okinawa 2011, October 25-28, 2011, Okinawa, Japan. Okinawa: JFPS international Symposium on Fluid Power, p. 571-578 (International Symposium on Fluid Power JFPS).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  19. Published

    Feature Extraction and Self-Organizing Maps in Condition Monitoring of Hydraulic Systems

    Krogerus, T., 28 Jan 2011, Tampere: Tampere University of Technology. 126 p. (Tampere University of Technology. Publication; vol. 949)

    Research output: Book/ReportDoctoral thesisMonograph

  20. Published

    Applying self-organizing maps to condition monitoring of hydraulic systems

    Krogerus, T., 2010, Proceedings of the 3rd GIM Scientific Workshop, February 17-18, 2010, Aalto University School of Science and Technology. Halme, A. & Pirttioja, T. (eds.). p. 1-10 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  21. Published

    From measurements data to information

    Krogerus, T., 2012, GIM - Generic Intelligent Machines, Proceedings of the 6th GIM Scientific Workshop , November 7-8, 2012, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). Tampere: Tampere University of Technology. Department of Intelligent Hydraulics and Automation, p. 51-62 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  22. Published

    Data analysis process of working hydraulics of small mobile machine

    Krogerus, T., Rokala, M. & Koskinen, K. T., 2012, In : International Journal of Fluid Power. 13, 3, p. 5-15

    Research output: Contribution to journalArticleScientificpeer-review

  23. Published

    Testing of data analysis process in hydraulic forklift

    Krogerus, T. & Koskinen, K. T., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Sairala, H. & Koskinen, K. T. (eds.). Tampere: Scandinavian International Conference on Fluid Power, p. 105-234 130 p. (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  24. Published

    Recognition of Operating States of a Medium-Sized Mobile Machine

    Krogerus, T., Hyvönen, M., Raivio, K. & Huhtala, K., 2013, Proceedings of the 13th Scandinavian International Conference on Fluid Power, 3-5 June, Linköping, Sweden. p. 1-10 10 p. (Scandinavian International Conference on Fluid Power).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  25. Published

    Recognition of Operating States of a Wheel Loader for Diagnostics Purposes

    Krogerus, T., Hyvönen, M. & Huhtala, K., 2013, In : SAE International Journal of Commercial Vehicles. 6, 2, p. 1-7 7 p., 2013-01-2409.

    Research output: Contribution to journalArticleScientificpeer-review

  26. Published

    Anomaly Detection and Diagnostics of a Wheel Loader Using Dynamic Mathematical Model and Joint Probability Distributions

    Krogerus, T., Hyvönen, M., Backas, J. & Huhtala, K., 2015, Proceedings of the Fourteenth Scandinavian International Conference on Fluid Power, SICFP15. May 20-22, 2015. Tampere, Finland. Tampere University of Technology. Department of Intelligent Hydraulics and Automation, 14 p. (The Scandinavian International Conference on Fluid Power).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  27. Published

    A Survey of Analysis, Modeling, and Diagnostics of Diesel Fuel Injection Systems

    Krogerus, T. R., Hyvönen, M. P. & Huhtala, K. J., 2016, In : Journal of Engineering for Gas Turbines and Power: Transactions of the ASME. 138, 8, p. 1 11 p., 081501.

    Research output: Contribution to journalArticleScientificpeer-review

  28. Published

    Analysis of common rail pressure signal of dual-fuel large industrial engine for identification of injection duration of pilot diesel injectors

    Krogerus, T., Hyvönen, M. & Huhtala, K., Mar 2018, In : Fuel. 216, p. 1-9

    Research output: Contribution to journalArticleScientificpeer-review

  29. Published

    Performance of a pump controlled asymmetric actuator: A comparison of different control methods

    Kukkonen, S. & Mäkinen, E., 2014, ASME/BATH 2014 Symposium on Fluid Power and Motion Control, FPMC2014, September 10-12, 2014, Bath, United Kingdom. The American Society of Mechanical Engineers ASME, p. 1-10 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  30. Published

    Hydraulics for High Inertia, Heavy Load Lifting Application - Comparing Different Options

    Kukkonen, S. & Mäkinen, E., 2013, The 8th International Conference on Fluid Power Transmission and Control, ICFP 2013, April 9-11, 2013, Zhejiang University, Hangzhou, China. Yongxiang, L., Qingfeng, W., Bingfeng, J. & Jun, Z. (eds.). p. 176-180 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  31. Published

    A low resolution digital hydraulic control application

    Kukkonen, S. & Mäkinen, E., 2012, Proceedings of the 13th Mechatronics Forum International Conference, September 17-19, 2012, Johannes Kepler University Linz, Austria, Advances in Mechatronics. Scheidl, R. & Jakoby, B. (eds.). Linz: TRAUNER VERLAG, p. 8 p (Mechatronics Forum; vol. 1/3).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  32. Published

    Scanner test pattern for evaluation of beam manipulation accuracy

    Kumpulainen, T., Latokartano, J., Vihinen, J. & Tuokko, R., 2011, IEEE International Symposium on Assembly and Manufacturing, ISAM 2011, 25-27 May, 2011, Tampere Hall, Tampere, Finland. Piscataway, NJ: IEEE, p. 1-6 6 p. (IEEE International Symposium on Assembly and Manufacturing ISAM).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  33. Published

    Low temperature nanoparticle sintering with continuous wave and pulse lasers

    Kumpulainen, T., Pekkanen, J., Valkama, J., Laakso, J., Tuokko, R. & Mäntysalo, M., 2011, In : Optics and laser technology. 43, 3, p. 570-576

    Research output: Contribution to journalArticleScientificpeer-review

  34. Published

    Surface Processing of Zirconia Ceramics by Laser

    Kumpulainen, T., Ismailov, A., Hyvärinen, L., Levänen, E. & Vihinen, J., 2014, Proceedings of the Twenty Eighth International Conference on Surface Modification Technologies. p. 275-284 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  35. Published

    Novel approach on application manufacturing using inkjet printing, laser ablation and new polymer substrate

    Kunnari, E., Karttunen, M., Kumpulainen, T., Kortet, S., Laine-Ma, T., Mäntysalo, M., Smalen, M. & Ruuskanen, P., 2010, ICEP2010. International Conference on Electronics Packaging, May 12-14, 2010, Hokkaido, Japan. p. 249-254

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  36. Published

    Experimental Investigation of the Internal Heating of Metals in a Wide Range of Strain Rates Using Simultaneous Digital Image Correlation and High Speed Infrared Imaging

    Kuokkala, V-T., Smith, J., Seidt, J. & Gilat, A., 2016.

    Research output: Other conference contributionPaper, poster or abstractScientific

  37. Published

    Puhtaus on puoli hydrauliikkaa

    Kuosku, M. & Rinkinen, J., 2013, In : Promaint. 27, 5, p. 34-36 3 p.

    Research output: Contribution to journalArticleProfessional

  38. Published

    Examples of technical cleanliness of fluid power components

    Kuosku, M., Pekkonen, J. & Rinkinen, J., 2013, The Tenth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, CM2013/MFPT2013, 18-20 June 2013, Krakow, Poland. Coxmoor Publishing, p. 1-12 12 p. (International Conference on Condition Monitoring and Machinery Failure Prevention Technologies).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  39. Published

    Hiukkasen puhtaammaksi -laboratorio hydraulikomponenttien puhtaustutkimuksiin

    Kuosku, M. & Rinkinen, J., 2011, In : Promaint. 25, 5, p. 42-45

    Research output: Contribution to journalArticleProfessional

  40. Published

    Mittaustuloksia kaupallisilla puhtaustestikaapeilla

    Kuosku, M., Pekkonen, J. & Rinkinen, J., 2012, KompuNW -verkostoseminaari TTY:ssa 9.10.2012. Tampere: Tampere University of Technology, IHA - Department of Intelligent Hydraulics and Automation, p. 1-15 15 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  41. Published

    Effect of the Immersion Level of a Virtual Loader Simulator on the Sense of Presence

    Kuusisto, J., Ellman, A., Kaapu, T. & Tiainen, T., 2011, ASME 2011 World Conference on Innovative Virtual Reality WINVR2011, June 27-29, 2011, Milan, Italy. New York, NY: ASME, (ASME World Conference on Innovative Virtual RealityWINVR).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  42. Published

    Developing VIP2M: A Virtual Environment for Prototyping Mobile Work Machines

    Kuusisto, J., Kaapu, T., Ellman, A. & Tiainen, T., 2012, Proceedings of the 12th International Design Conference, DESIGN 2012, 21-24 May, 2012, Dubrovnik, Croatia. Marjanovic, D., Storga, M., Pavkovic, N. & Bojcetic, N. (eds.). Zagreb: Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, The Design Society, Glasgow, p. 657-666 (International Design Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  43. Published

    A device configuration management tool for context-aware system

    Kuutti, A., Dvoryanchikova, A., Lobov, A., Martinez Lastra, J. L. & Vahtera, T., 2012, Proceedings of IEEE 10th International Conference on Industrial Informatics, INDIN 2012, 25-27 July, 2012, Beijing, China. Piscataway: Institute of Electrical and Electronics Engineers IEEE, p. 10-15 (IEEE International Conference on Industrial Informatics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  44. Published

    Pyörät ja pyssyt

    Kylliäinen, M., Partanen, S., Ojanen, O. J., Tikander, V., Katjamäki, T., Kortti, J., Piltz, M., Lempinen, O., Lehtonen, T., Lehtomäki, K. & Lilja, E., 2013, Kahdella pyörällä. Kirsi, L. (ed.). 246: Mobilia säätiö, p. 71-77

    Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

  45. Published

    Regenerative Hydraulic Hybrid with Digi-valve and Multi-chamber Cylinder Technology

    Laamanen, A., 2014, Tampere: FIMECC Oy. 5 p. (FIMECC Publications Series. Energy and Life-cycle Cost Efficient Machines; no. 2/2014)

    Research output: Book/ReportCommissioned reportProfessional

  46. Published

    Proceedings of the fifth workshop on digital fluid power, October 24-25, 2012, Tampere, Finland

    Laamanen, A. (ed.) & Linjama, M. (ed.), 2012, Tampere: Tampere University of Technology. Department of Intellidgent Hydraulics and Automation.

    Research output: Book/ReportAnthologyScientificpeer-review

  47. Published

    Proceedings of the Third Workshop on Digital Fluid Power, October 13-14 2010, Tampere, Finland

    Laamanen, A. (ed.) & Linjama, M. (ed.), 2010, Tampere: Tampere University of Technology.

    Research output: Book/ReportAnthologyScientificpeer-review

  48. Published

    Digital flow control unit for controlling amount of water used for binding dust

    Laamanen, A., Anttonen, P. & Linjama, M., 2010, Proceedings of the Third Workshop on Digital Fluid Power, October 13-14 2010, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). p. 119-128

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  49. Published

    Digital Microhydraulics

    Laamanen, A. & Linjama, M., 2014, Tampere: FIMECC Oy. 4 p. (FIMECC Publications Series; no. 2)

    Research output: Book/ReportCommissioned reportProfessional

  50. Published

    The Fourteenth Scandinavian International Conference on Fluid Power, SICFP15: Proceedings

    Laamanen, A. (ed.) & Huhtala, K. (ed.), 2015, Tampere University of Technology. Department of Intelligent Hydraulics and Automation. 835 p. (Scandinavian International Conference on Fluid Power (SICFP))

    Research output: Book/ReportAnthologyScientificpeer-review

Previous 1...7 8 9 10 11 12 13 14 ...25 Next
Download list To download, please limit the number of search results to 1,000 or less.