Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. Published

    Role-based visualization of industrial IoT-based systems

    Mahmoodpour, M., Lobov, A., Lanz, M., Mäkelä, P. & Rundas, N., 27 Aug 2018, 2018 14th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications, MESA 2018. IEEE, 8 p. 8449183

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  2. Published

    IoT-Based senses for Virtual Enterprises

    Mahmoodpour, M., Mahmood, K. & Lobov, A., 2018, IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society : 21-23 Oct. 2018, D.C., DC, USA. IEEE, p. 4181-4186 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  3. Published

    A performance evaluation concept for production systems in an SME network

    Mahmood, K., Lanz, M., Toivonen, V. & Otto, T., 27 Jun 2018, In : Procedia CIRP. 72, p. 603-608 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  4. Published

    Using maintenance data for extended warranty simulation

    Mahlamäki, K., Jokinen, J., Borgman, J., Niemi, A. & Rämänen, J., 2015, COMADEM 2014, Implications of life cycle analysis in asset and maintenance management, 16-18 September 2014, Brisbane Convention and Exhibition Centre, Australia. 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  5. Published

    Importance of maintenance data quality in extended warranty simulation

    Mahlamäki, K., Niemi, A., Jokinen, J. & Borgman, J., 1 Jan 2016, In : International Journal of COMADEM. 19, 1, p. 3-10 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  6. Published

    A use case analysis method for the implementation of service-oriented solutions for monitoring and diagnostics

    Macchi, M., Fumagalli, L., Garetti, M., Tavola, G., Checcozzo, R., Rusina, F., Vidales Ramos, A., Jokinen, J., Popescu, C., Martinez Lastra, J., Karhumäki, O. & Vainio, M., 2011, Proceedings of the 24th International Congress on Condition Monitoring and Diagnostic Engineering Management, COMADEM 2011, Advances in Industrial Asset Integrity Management, 30 May-1 June 2011, Stavanger, Norway. Singh, M., Rao, R. B. K. N. & Liyanage, J. P. (eds.). Stavanger: COMADEM International, p. 406-413 (International Congress on Condition Monitoring and Diagnostic Engineering Management COMADEM).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  7. Published

    Precise online auto-focus system in high speed laser micromachining applications

    Määttänen, A., Hautala, V. & Vihinen, J., 2012, In : Physics Procedia. 39, p. 807-813

    Research output: Contribution to journalArticleScientificpeer-review

  8. Published

    Divertor cassette locking system remote handling trials with WHMAN at DTP2

    Lyytikäinen, V., Kinnunen, P., Koivumäki, J., Mattila, J., Siuko, M., Esque, S. & Palmer, J., 2013, In : Fusion Engineering and Design. 88, 9-10, p. 2181-2185 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  9. Published

    Hermetic room temperature glass welding technology

    Lundén, H., Kumpulainen, T., Määttänen, A. & Vihinen, J., 2014, 2014 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2014 June 15-18, 2014, Washington, DC, USA. Nano Science and Technology Institute, p. 13-16 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  10. Published

    Novel glass welding technique for hermetic encapsulation

    Lundén, H., Kumpulainen, T., Määttänen, A. & Vihinen, J., 2014, 5th Electronics System-Integration Technology Conference, ESTC 2014, September 16-18, 2014, Helsinki, Finland. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, p. 1-4 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  11. Published

    Evaluating the confidence level of prognostic predictions

    Lumme, V. & Pylvänen, M., 2012, 2012 IEEE Conference on Prognostics and Health Management PHM, 18-21 June 2012, Denver, CO, USA. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, p. 1-6 6 p. (IEEE International Conference on Prognostics and Health Management).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  12. Published

    Principles of Classification

    Lumme, V., 2013, Diagnostics and Prognostics of Engineering Systems: Methods and Techniques. Seifedine, K. (ed.). IGI Global, p. 55-73 19 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  13. Published

    Diagnosis of multi-descriptor condition monitoring data

    Lumme, V., 2011, 2011 IEEE Conference on Prognostics and Health Management PHM, 20.-23.6.2011, Denver, CO, USA. Piscataway, NJ: IEEE, p. 1-10 10 p. 6024327. (IEEE Conference on Prognostics and Health Management PHM).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  14. Method and apparatus for mechanical defibration of wood

    Lukander, M., Björkqvist, T. & Tuovinen, O., 2014, Patent No. Pat. CA 2608207 C, Priority date 25 Mar 2014, Priority No. 2005//06/03 US 60/686,919 : 686919

    Research output: PatentScientific

  15. Published

    Improved Real-Time Stability Assessment of Grid-Connected Converters Using MIMO-Identification Methods

    Luhtala, R., Reinikka, T., Roinila, T., Messo, T. & Sihvo, J., 6 Dec 2018, The 10th Annual IEEE Energy Conversion Congress and Exposition (ECCE 2018): September 23 – 27, 2018, Portland, Oregon, USA . IEEE, p. 5322-5329 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  16. Published

    Capability of the turret punch press process: Intelligence between design and manufacturing

    Lohtander, M., Järvenpää, E. & Varis, J., 2013, 2013 IEEE International Symposium of Assembly and Manufacturing (ISAM), July 30th – Aug 2nd 2013, Xi’an, China. Piscataway: Institute of Electrical and Electronics Engineers IEEE, p. 180-182 3 p. (International Symposium on Assembly and Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  17. Published

    Micro Manufacturing Unit and the Corresponding 3D-Model for the Digital Twin

    Lohtander, M., Garcia, E., Lanz, M., Volotinen, J., Ratava, J. & Kaakkunen, J., 2018, In : Procedia Manufacturing. 17, p. 55-61

    Research output: Contribution to journalArticleScientificpeer-review

  18. Published

    Formal validation of discrete automation systems applying structural reasoning and general unary hypothesis automaton methods

    Lobov, A., 2008, Tampere: Tampere University of Technology. 121 p. (Tampereen teknillinen yliopisto. Julkaisu; vol. 782)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  19. Published

    Smart manufacturing systems: climbing the DIKW pyramid

    Lobov, A., 2018, IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society : 21-23 Oct. 2018, D.C., DC, USA. IEEE, p. 4730-4735 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  20. Published

    Validity of parameters in static linear testing of flexor tendon repair

    Linnanmäki, L., Göransson, H., Havulinna, J., Sippola, P., Karjalainen, T. & Leppänen, O. V., 2016, In : Journal of Biomechanics. 49, 13, p. 2785–2790

    Research output: Contribution to journalArticleScientificpeer-review

  21. Published

    Gap Formation During Cyclic Testing of Flexor Tendon Repair

    Linnanmäki, L., Göransson, H., Havulinna, J., Sippola, P., Karjalainen, T. & Leppänen, O. V., Jun 2018, In : Journal of Hand Surgery. 43, 6, p. 570.e1-570.e8

    Research output: Contribution to journalArticleScientificpeer-review

  22. Published

    Running-in effects on friction of journal bearings under slow sliding speeds

    Linjamaa, A., Lehtovaara, A., Kallio, M. & Léger, A., 2019, In : Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology.

    Research output: Contribution to journalArticleScientificpeer-review

  23. Published

    Fundamentals of Digital Microhydraulic

    Linjama, M., 2012, Proceedings of the 8th International Fluid Power Conference, Dresden, March 26-28, 2012. Dresden: Technische Universität Dresden, Institute of Fluid Power, p. 385-396 (International Fluid Power Conference; vol. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  24. Published

    Hydraulic hybrids

    Linjama, M., 2011, GIM - Generic Intelligent Machines, The 4th GIM Scientific Workshop, January 18-19, 2011, Tampere University of Technology, Tampere, Finland. Tampere: Tampere University of Technology, p. 1-1 1 p. (GIM Scientific Workshop; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  25. Published

    Digital fluid power - state of the art

    Linjama, M., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Sairala, H. & Koskinen, K. T. (eds.). Tampere: Scandinavian International Conference on Fluid Power, p. 331-354 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  26. Published

    Hydrauliikan aika ei ole ohi - The time of hydraulics is not over

    Linjama, M., 2012, In : Fluid Finland. 11, 2, p. 10-12

    Research output: Contribution to journalArticleProfessional

  27. Published

    Digitaalihydrauliikan seminaarin satoa Tampereella

    Linjama, M., 2013, In : Fluid Finland. 12, 1, p. 8-8 1 p.

    Research output: Contribution to journalArticleProfessional

  28. Published

    Digitaalihydrauliikka tulee!

    Linjama, M., 2010, In : Metsäalan ammattilehti. 5, p. 88-89

    Research output: Contribution to journalArticleProfessional

  29. Published

    Matkaraportti: Digitaalihydrauliikan seminaari marraskuisessa Linzissä

    Linjama, M., 2010, In : Fluid Finland. 1/2010, p. 12-14

    Research output: Contribution to journalArticleScientific

  30. Published

    Laitteisto, ohjauspiiri ja menetelmä paineen ja tilavuusvirran tuottamiseksi

    Linjama, M., Tammisto, J., Huhtala, K. & Vilenius, M., 2010, Patent No. Pat. FI 121090 B, Priority date 30 Jun 2010, Priority No. (21) FI 20085242

    Research output: PatentScientific

  31. Published

    Discussion: Is the future of fluid power digital? Response

    Linjama, M., Scheidl, R. & Schmidt, S., 2012, In : Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering. 226, I6, p. 726-727

    Research output: Contribution to journalArticleScientific

  32. Published

    Modelling of flow characteristics of on/off valves

    Linjama, M., Huova, M. & Karvonen, M., 2012, DFP 12, Proceedings of the fifth workshop on digital fluid power, October 24-25, 2012, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). Tampere: Tampere University of Technology, Department of Intelligent Hydraulics and Automation, p. 209-222 (Workshop on digital fluid power).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  33. Published

    Model-based pressure control with digital valve system

    Linjama, M. & Lahtinen, J., 2011, The Fourth Workshop on Digital Fluid Power, 21st-22nd November, 2011, Linz, Austria. Linz: DFP-Workshops, p. 26-38 (Workshop on Digital Fluid Power; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  34. Published

    Digital hydraulic power management system - towards lossless hydraulics

    Linjama, M. & Huhtala, K., 2010, Proceedings of the Third Workshop on Digital Fluid Power, October 13-14 2010, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). p. 5-22

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  35. Published

    Mechatronic design of digital hydraulic micro valve package

    Linjama, M., Paloniitty, M., Tiainen, L. & Huhtala, K., 2014, The Second International Conference on Dynamics and Vibroacoustics of Machines, September 15-17, 2014, Samara, Russia. p. 610-617 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  36. Published

    High-Performance Digital Hydraulic Tracking Control of a Mobile Boom Mockup

    Linjama, M., Huova, M., Karhu, O. & Huhtala, K., Mar 2016, 10th International Fluid Power Conference (10. IFK) . Dresden, Vol. 1. 12 p. A-1

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  37. Published

    On the numerical solution of steady-state equations of digital hydraulic valve-actuator system

    Linjama, M., 24 May 2016, Proceedings of the eighth workshop on digital fluid power. Uusi-Heikkilä, J. & Linjama, M. (eds.). Tampere: Tampere University of Technology, p. 141-155

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  38. Published

    Energy efficient tracking control of a mobile machine boom mockup

    Linjama, M., Huova, M., Karhu, O. & Huhtala, K., 24 May 2016, Proceedings of the eighth workshop on digital fluid power. Uusi-Heikkilä, J. & Linjama, M. (eds.). Tampere: Tampere University of Technology, p. 265-275

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  39. Published

    Model-based force and position tracking control of an asymmetric cylinder with a digital hydraulic valve

    Linjama, M., Huova, M. & Huhtala, K., 1 Sep 2016, In : International Journal of Fluid Power. 17, 3, p. 163-172

    Research output: Contribution to journalArticleScientificpeer-review

  40. Published

    Model-based force and position tracking control of a multi-pressure hydraulic cylinder

    Linjama, M. & Huova, M., Jan 2018, In : Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering. 232, 3, p. 324-335

    Research output: Contribution to journalArticleScientificpeer-review

  41. Published

    Switching control of a water hydraulic cylinder with slow parallel-connected on/off valves

    Linjama, M., Grönholm, J. & Paloniitty, M., 28 Feb 2019, The 10th Workshop on Digital Fluid Power : February 28th-March 1st, 2019, Linz, Austria. Linz Center of Mechatronics, 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  42. Published

    Internal and external stakeholders’ impact on product development curriculum design

    Lindsten, H., Auvinen, P. & Juuti, T., 12 Sep 2019, DS 95: Proceedings of the 21st International Conference on Engineering and Product Design Education (E&PDE 2019), University of Strathclyde, Glasgow. 12th -13th September 2019. The Design Society

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  43. Published

    Modeling and Optimization of Plate Fins and Plate Fin Heat Sinks

    Lindstedt, M., 2013, Tampere: Tampere University of Technology. 70 p. (Tampere University of Technology. Publication)

    Research output: Book/ReportDoctoral thesisMonograph

  44. Published

    Improvements of refiner performance using flow modeling and optimization

    Lindstedt, M., Huhtanen, J-P. & Karvinen, R., 2011, Proceedings of IMPC, International Mechanical Pulping Conference 2011, Xi'an, P.R. of China, June 26-29, 2011. Zhang, M., Fang, G., Hay, G., Li, Z., Xu, Y., Lin, T. & Zhang, S. (eds.). Xi'an, P. R. of China: Pulp and Paper Technical Association of Canada; China Light Industry Press, p. 129-132 (International Mechanical Pulping Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  45. Published

    Optimization of isothermal fin arrays

    Lindstedt, M. & Karvinen, R., 2011, IWHT 2011, The International Workshop on Heat Transfer Advances for Energy Conservation and Pollution Control - 2011, Xi'an, Shaanxi, China, October 17-20, 2011. Xi'an, Shaanxi: Xi'an Jiaotong University, p. 1-7 7 p. (International Workshop on Heat Transfer Advances for Energy Conservation & Pollution Control; no. IWHT2011-067).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  46. Published

    Optimization of fin arrays

    Lindstedt, M. & Karvinen, R., 2011, Proceedings of 6th Baltic Heat Transfer Conference - BHTC2011, August 24-26 2011, Tampere Finland. Karvinen, R. & Lindstedt, M. (eds.). Tampere: Tampere University of Technology, p. 1-15 15 p. (Baltic Heat Transfer Conference BHTC).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  47. Published

    Optimal geometry of single fins and fin arrays

    Lindstedt, M. & Karvinen, R., 2013, Eurotherm Seminar No 96, Convective Heat Transfer Enhancement 17-18 September 2013, Royal Military Academy, Brussels, Belgium. Ecole Royale Militaire; von Karman Insitute for fluid dynamics; Universite de Valenciennes et du Hainaut-Cambresis, p. 1-6 6 p. 33

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  48. Published

    Conjugate heat transfer in a plate - One surface at constant temperature and the other cooled by forced or natural convection

    Lindstedt, M. & Karvinen, R., 2013, In : International Journal of Heat and Mass Transfer. 66, p. 489-495 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  49. Published

    Improvements to refiner performance with flow modeling and optimization

    Lindstedt, M., Huhtanen, J-P. & Karvinen, R., 2010, 7th International Seminar on Fundamental Mechanical Pulp Research (IFMPRS 2010), June 21-23, 2010, Nanjing, China. p. 202-210

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  50. Published

    Optimization of isothermal plate fin arrays with laminar forced convection

    Lindstedt, M. & Karvinen, R., 2012, In : Journal of Enhanced Heat Transfer. 19, 6, p. 535-547

    Research output: Contribution to journalArticleScientificpeer-review

Previous 1...8 9 10 11 12 13 14 15 ...25 Next
Download list To download, please limit the number of search results to 1,000 or less.