Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. Published

    On the effect of damping on stability of non-conservative systems

    Jeronen, J. & Kouhia, R., 2015, Proceedings of the XII Finnish Mechanics Days: Suomen XII mekaniikkapäivien esitelmät. Kouhia, R., Mäkinen, J., Pajunen, S. & Saksala, T. (eds.). Rakenteiden Mekaniikan Seura ry, p. 77 82 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  2. Published

    On the integration of an evolution equation based high-cycle fatigue model

    Jeronen, J., Kouhia, R., Lahtinen, J. & Orelma, H., 2019, Proceedings of the 32nd Nordic Seminar on Computational Mechanics. Niemi, A. H. & Koivurova, H. (eds.). University of Oulu, p. 95-97 3 p. (Raportti / Oulun yliopisto, konetekniikka; no. 9).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  3. Published

    Analysis of single flank test results providing flank topography errors of spiral bevel gears

    Jerabek, F., 2000, Tampere: Tampere University of Technology. (Tampereen teknillinen korkeakoulu. Julkaisuja; vol. 314)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  4. Published

    A parameter study of a digital pump

    Jaurola, M. & Huhtala, K., 2010, Fluid Power and Motion Control (FPMC 2010), 15-17 September 2010, University of Bath, UK. Johnston, D. N. & Plummer, A. (eds.). p. 203-215

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  5. Published

    Valve parameter study in case of digital pump

    Jaurola, M., 2010, Proceedings of the 3rd GIM Scientific Workshop, February 17-18, 2010, Aalto University School of Science and Technology. Halme, A. & Pirttioja, T. (eds.). Espoo, p. 1-13 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  6. Published

    Microstructure-property relationships of novel ultra-high strength press hardening steels

    Järvinen, H., Honkanen, M., Oja, O., Järvenpää, M. & Peura, P., 2019, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 50, 2, p. 816-836 21 p.

    Research output: Contribution to journalArticleScientificpeer-review

  7. Published

    On vibroacoustic analysis of grinding contact vibrations

    Järvenpää, V-M., Yuan, L. & Kalbasi Shirvani, H., 2014, Proceedings of the 21st International Congress on Sound and Vibration, In Depth Sound and Vibration Research, 2014 ICSV21, 13-17 July, 2014, Beijing. Crocker, M. J., Pawelczyk, M. & Tian, J. (eds.). International Institute of Acoustics and Vibration (IIAV), p. 2431-2436 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  8. Published

    Suomalaisten konepajojen tuotannonsuunnittelu on ERP:n ja Excel-taulukoiden varassa

    Järvenpää, E. & Lanz, M., 2014, In : Stoori. 4, p. 19-24 6 p.

    Research output: Contribution to journalArticleProfessional

  9. Published

    Host activities in connection with the DTP2 test facility

    Järvenpää, J., Timperi, A., Tuominen, R. & Mattila, J., 2008, Espoo: VTT. 5 p. (VTT Publications; vol. 678)

    Research output: Book/ReportCommissioned reportProfessional

  10. Published

    Activities and corresponding information flows for production system adaption planning

    Järvenpää, E., Lanz, M., Siltala, N. & Tuokko, R., 2011, Proceedings of the 4th International Swedish Production Symposium, SPS11 3-5 May, 2011, Lund, Sweden. Ståhl, J-E. (ed.). Lund: The Swedish Production Academy, p. 124-133 (International Swedish Production Symposium SPS).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  11. Published

    TUT-Microfactory – A small-size, modular and sustainable production system

    Järvenpää, E., Heikkilä, R. & Tuokko, R., 2013, Proceedings of 11th Global Conference on Sustainable Manufacturing GCSM - Innovative Solutions, Berlin, Germany, 23rd-25th September, 2013. Seliger, G. (ed.). Berlin: Technische Universität Berlin, p. 79-84 6 p. (Global Conference on Sustainable Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  12. Published

    Requirements for Manufacturing Operations Management and Control Systems in a Dynamic Environment

    Järvenpää, E., Tokola, H., Salonen, T., Lanz, M., Koho, M. & Tuokko, R., 2014, Proceedings of the 24th International Conference on Flexible Automation and Intelligent Manufacturing, FAIM2014, 20th -23rd May, San Antonio, Texas, USA. Chen, F. F. (ed.). Lancaster, Pennsylvia: DEStech Publications, p. 1135-1142 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  13. Published

    Capability-Based Approach for Evaluating the Impact of Product Requirement Changes on the Production System

    Järvenpää, E. & Torvinen, S., 2013, 23rd International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 13, The challenge of sustaining global competitive manufacturing system, 26-28 June 2013 Porto Portugal, Advances in Sustainable and Competitive Manufacturing Systems. Azevedo, A. (ed.). Switzerland: Springer International Publishing, p. 173-185 13 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  14. Published

    Capability-based ontological resource model and rules for describing and assigning resources in sheet metal manufacturing

    Järvenpää, E., Lohtander, M. & Tuokko, R., 2013, 2013 IEEE International Symposium of Assembly and Manufacturing (ISAM), July 30th – Aug 2nd 2013, Xi’an, China. Piscataway: Institute of Electrical and Electronics Engineers IEEE, p. 105-108 3 p. (International Symposium on Assembly and Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  15. Published

    Dynamic operation environment - towards intelligent adaptive production systems

    Järvenpää, E., Luostarinen, P., Lanz, M., Garcia, F. & Tuokko, R., 2011, IEEE International Symposium on Assembly and Manufacturing, ISAM 2011, 25-27 May, 2011, Tampere Hall, Tampere, Finland. Piscataway, NJ: IEEE, p. 1-6 6 p. (IEEE International Symposium on Assembly and Manufacturing ISAM).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  16. Published

    Presenting capabilities of resources and resource combinations to support production system adaptation

    Järvenpää, E., Luostarinen, P., Lanz, M. & Tuokko, R., 2011, IEEE International Symposium on Assembly and Manufacturing, ISAM 2011, 25-27 May, 2011, Tampere Hall, Tampere, Finland. Piscataway, NJ: IEEE, p. 1-6 6 p. (IEEE International Symposium on Assembly and Manufacturing ISAM).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  17. Published

    Modeling of Tangential Vibrations in Cylindrical Grinding Contact with Regenerative Chatter

    Järvenpää, V-M., Yuan, L., Kalbasi Shirvani, H. & Mehmood, F., 2013, Surveillance 7 - International conference, Institute of Technology of Chartres, France, October 29-30, 2013. 10 p. (International Conference Surveillance).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  18. Published

    Towards automatic reconfiguration planning of changeable assembly systems

    Järvenpää, E. & Tuokko, R., 2010, Proceeding of Post-Graduate Workshop on Intelligent Machines and Transport Systems, 3-7 May 2010, CERN, Switzerland. p. 79-89

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  19. Published

    Factory level logistics and control aspects for flexible and reactive microfactory concept

    Järvenpää, E., Heikkilä, R. & Tuokko, R., 2010, Frontiers of Assembly and Manufacturing - Selected papers from ISAM 2009. Lee, S., Suarez, R. & Choi, B-W. (eds.). Springer-Verlag Berlin Heidelberg, p. 127-140

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  20. Published

    Capability-Based Adaptation of Production Systems - Practical Case Study in TUT-Microfactory Environment

    Järvenpää, E., Lanz, M. & Tuokko, R., 2013, 5th International conference on advanced design and manufacture, 25-28 September 2013, Valencia, Spain. Su, D. & Zhu, S. (eds.). Trans Tech Publications, p. 245-248 4 p. (Key Engineering Materials; vol. 572).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  21. Published

    Studying the information sources and flows in a company - Support for the development of new intelligent systems

    Järvenpää, E., Lanz, M., Mela, J. & Tuokko, R., 2010, Proceedings of the 20th International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2010, July 12-14, 2010, California State University East Bay, USA. p. 387-394

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  22. Published

    Development of a rule-base for matching product requirements against resource capabilities in an adaptive production system

    Järvenpää, E., Luostarinen, P., Lanz, M. & Tuokko, R., 2012, The 22nd International Conference on Flexible Automation and Intelligent Manufacturing , FAIM 2012, 10-13 June, 2012, Helsinki, Finland. Hasse, N., Satu, K., Ville, T. & Seppo, T. (eds.). Tampere: Tampere University of Technology. Department of Production Engineering, p. 449-456 (International Conference on Flexible Automation and Intelligent Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  23. Published

    Delay excited vibrations in grinding wheel rotor system

    Järvenpää, V-M. & Yuan, L., 2014, Proceedings of the 21st International Congress on Sound and Vibration, In Depth Sound and Vibration Research 2014, ICSV21, 13-17 July, 2014, Beijing, China. Crocker, M. J., Pawelczyk, M. & Tian, J. (eds.). International Institute of Acoustics and Vibration (IIAV), p. 2437-2444 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  24. Published

    Capability-based adaptation of production systems in a changing environment

    Järvenpää, E., 2012, Tampere: Tampere University of Technology. 168 p. (Tampere University of Technology. Publication; vol. 1082)

    Research output: Book/ReportDoctoral thesisMonograph

  25. Published

    Adaptation of manufacturing systems in dynamic environment based on capability description method

    Järvenpää, E., Luostarinen, P., Lanz, M. & Tuokko, R., 2012, Manufacturing systems. Faieza, A. A. (ed.). Rijeka, Croatia: InTech, p. 93-118

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  26. Published

    Microfactory concept for highly flexible volume assembly of watch mechanisms

    Järvenpää, E., Heikkilä, R. & Tuokko, R., 2010, Proceedings of the 7th International Workshop on Microfactories, IWMF 2010, 24-27 October, 2010, Daejeon, Korea. p. 9-14

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  27. Published

    Micro-factories

    Järvenpää, E., Heikkilä, R., Siltala, N., Prusi, T. & Tuokko, R., 2015, Micromanufacturing Engineering and Technology. 2 ed. Elsevier, p. 549-579

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  28. Published

    Production planning and control in Finnish manufacturing companies – Current state and challenges

    Järvenpää, E., Lanz, M., Tokola, H., Salonen, T. & Koho, M., 2015, Proceedings of the 25th International Conference on Flexible Automation and Intelligent Manufacturing. 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  29. Published

    Guidelines for Designing Human-friendly User Interfaces for Factory Floor Manufacturing Operators

    Järvenpää, E. & Lanz, M., 2015, Advances in Production Management Systems: Innovative Production Management Towards Sustainable Growth: IFIP WG 5.7 International Conference, APMS 2015, Tokyo, Japan, September 7-9, 2015, Proceedings, Part II. Springer International Publishing, p. 531-538 8 p. (IFIP Advances in Information and Communication Technology).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  30. Published

    Application of a Capability-based Adaptation Methodology to a Small-size Production System

    Järvenpää, E., Lanz, M. & Tuokko, R., 2016, In : International Journal of Manufacturing Technology and Management. 30, 1/2, p. 67-86 20 p.

    Research output: Contribution to journalArticleScientificpeer-review

  31. Published

    Formal Resource and Capability Descriptions Supporting Rapid Reconfiguration of Assembly Systems

    Järvenpää, E., Siltala, N. & Lanz, M., Aug 2016, Proceedings of the 12th Conference on Automation Science and Engineering, and International Symposium on Assembly and Manufacturing. IEEE, p. 120-125 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  32. Published

    Agility Challenges in Finnish Manufacturing Companies – Manufacturing Operations Management Viewpoint

    Järvenpää, E., Lanz, M. & Lammervo, E., Sep 2016, Advances in Production Management Systems: Initiatives for a Sustainable World - IFIP WG 5.7 International Conference, APMS 2016, Revised Selected Papers. Springer, p. 130-137 8 p. (IFIP Advances in Information and Communication Technology; vol. 488).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  33. Published

    LeanMES Concept – An Approach to Manage Order-Delivery Information in a Production Network

    Järvenpää, E., Toivonen, V., Lanz, M. & Nieminen, H., 2016, Proceedings of the 26th International conference on Flexible Automation and Intelligent Manufacturing (FAIM2016). p. 988-995 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  34. Published

    Challenges of Knowledge and Information Management during New Product Introduction: Experiences from a Finnish Multinational Company

    Järvenpää, E., Kopra, M-J. & Lanz, M., 2016, In : Interdisciplinary Journal of Information, Knowledge, and Management. 11, p. 285 308 p.

    Research output: Contribution to journalArticleScientificpeer-review

  35. Published

    Capability Matchmaking Procedure to Support Rapid Configuration and Re-configuration of Production Systems

    Järvenpää, E., Siltala, N., Hylli, O. & Lanz, M., Sep 2017, In : Procedia Manufacturing. 11, p. 1053-1060 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  36. Published

    Formal resource and capability models supporting re-use of manufacturing resources

    Järvenpää, E., Lanz, M. & Siltala, N., Feb 2018, In : Procedia Manufacturing. 19, p. 87-94 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  37. Published

    The development of an ontology for describing the capabilities of manufacturing resources

    Järvenpää, E., Siltala, N., Hylli, O. & Lanz, M., Feb 2019, In : Journal of Intelligent Manufacturing. 30, 2, p. 959-978 20 p.

    Research output: Contribution to journalArticleScientificpeer-review

  38. Published

    Product Model ontology and its use in capability-based matchmaking

    Järvenpää, E., Siltala, N., Hylli, O. & Lanz, M., 27 Jun 2018, In : Procedia CIRP. 72, p. 1094-1099

    Research output: Contribution to journalArticleScientificpeer-review

  39. Published

    Utilizing SPIN rules to infer the parameters for combined capabilities of aggregated manufacturing resources

    Järvenpää, E., Hylli, O., Siltala, N. & Lanz, M., Sep 2018, In : IFAC-PapersOnLine. 51, 11, p. 84-89 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  40. Published

    Implementation of capability matchmaking software facilitating faster production system design and reconfiguration planning

    Järvenpää, E., Siltala, N., Hylli, O. & Lanz, M., Oct 2019, In : Journal of Manufacturing Systems. 53, p. 261-270 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  41. Published

    Inelastic buckling of plates subjected to multi axial in-plane loads

    Jahanpour, A. & Kouhia, R., 2019, Proceedings of the 32nd Nordic Seminar on Computational Mechanics. Niemi, A. H. & Koivurova, H. (eds.). University of Oulu, p. 83-86 4 p. (Raportti / Oulun yliopisto, konetekniikka; no. 9).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  42. Published

    Enhancement of security in the hierarchy model of control and automation by applying single sign-on approach for web services

    Jafary, P., Lobov, A. & Martinez Lastra, J. L., 2012, Proceedings of 10th International Conference on ICT and Knowledge Engineering, 21-23 November, 2012, Siam University, Bangkok, Thailand. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, p. 252-259 (International Conference on ICT and Knowledge Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  43. Published

    Additive Manufacturing in Production: A Study Case Applying Technical Requirements: 15th Nordic Laser Materials Processing Conference, Nolamp 15

    Ituarte, I. F., Coatanea, E., Salmi, M., Tuomi, J. & Partanen, J., 2015, In : Physics Procedia. 78, p. 357-366 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  44. Published

    Simulation and advanced control of transient behaviour in gyratory cone crushers

    Itävuo, P., Jaatinen, A. & Vilkko, M., 2011, 8th International Mineral Processing Seminar, Santiago, Chile, 30.11-2.12.2011. Kracht, W., Kuyvenhoven, R., Lynch-Watson, S. & Montes-Atenas, G. (eds.). Santiago: Gecamin, p. 63-72 (International Mineral Processing Seminar).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  45. Published

    Feed-hopper level estimation and control in cone crushers

    Itävuo, P., Hulthén, E. & Vilkko, M., 15 Aug 2017, In : Minerals Engineering. 110, p. 82-95 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  46. Published

    Mass balance control of crushing circuits

    Itävuo, P., Hulthén, E., Yahyaei, M. & Vilkko, M., May 2019, In : Minerals Engineering. 135, p. 37-47 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  47. Published

    Problematics of friction in a high-speed rubber-wheel wear test system: A case study of irregularly rough steel in water lubricated contact

    Ismailov, A., Järveläinen, M. & Levänen, E., 15 Aug 2018, In : Wear. 408-409, p. 65-71

    Research output: Contribution to journalArticleScientificpeer-review

  48. Published

    Modelling of fretting fatigue cracking risk in shrink fit with wavy surfaces

    Immonen, J., Lehtovaara, A. & Lönnqvist, C., 2010, 14th Nordic Symposium on Tribology, Nordtrib 2010, Storforsen, Sweden, Luleå University of Technology. p. 1-8 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  49. Published

    Energy saving in working hydraulics of long booms in heavy working vehicles

    Immonen, P., Ponomarev, P., Åman, R., Ahola, V., Uusi-Heikkilä, J., Laurila, L., Handroos, H., Niemelä, M., Pyrhönen, J. & Huhtala, K., 1 May 2016, In : Automation in Construction. 65, p. 125-132 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  50. Published

    Energy efficiency evaluation method for machine tools

    Ikkala, K., Lanz, M., Kiviö, J. & Coatanéa, E., 2015, Flexible Automation and Intelligent Manufacturing 2015. The Choir Press, p. 58-65 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Download list To download, please limit the number of search results to 1,000 or less.