Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. Published

    Vaikuttavaa tutkimusta tavoitteellisella verkostotoiminnalla, Matine strategia 2018

    Riitahuhta, A. & Appelqvist, P., 2012, Helsinki: Maanpuolustuksen tieteellinen neuvottelukunta MATINE. 25 p.

    Research output: Book/ReportCommissioned reportProfessional

  2. Published

    Open Product Development

    Riitahuhta, A., Lehtonen, T., Pulkkinen, A. & Huhtala, P., 2011, The future of design methodology. Birkhofer, H. (ed.). London: Springer, p. 135-146

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  3. Published

    Successful Industrial and Academia Cooperation in Technology Industry

    Riitahuhta, A. & Oja, H., 12 Jul 2015, Impact of Design Research on Industrial Practice: Tools, Technology, and Training. Chakrabarti, A. & Lindemann, U. (eds.). Springer International Publishing, p. 269-280 12 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  4. Published

    Hydrauliikan komponenttipuhtausstandardien hyödyntäminen suomalaisessa konepajateollisuudessa

    Rinkinen, J., 2010, In : Fluid Finland. 1/2010, p. 18-23

    Research output: Contribution to journalArticleScientific

  5. Published

    Versatile maintenance solutions in oil related systems

    Rinkinen, J., 2011, In : Condition Monitor. 296, p. 5-12

    Research output: Contribution to journalArticleProfessional

  6. Published

    Versatile Maintenance Solutions in Oil Related Systems

    Rinkinen, J., 2011, The Eight International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 20-22 June 2011, Cardiff, Wales. Northamption: British Institute of Non-destructive Testing, p. 1234-1249 (International Conference on Condition Monitoring and Machinery Failure Prevention Technologies; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  7. Published

    Hydraulikomponenttien puhtausvalvontastandardien tilanne 2014

    Rinkinen, J., 2014, PAMAS 2014 Käyttäjäpäivä, 4.2.2014, Tampereen teknillinen yliopisto, Tampere. Rinkinen, J., Multanen, P., Elo, L. & Niiranen, E. (eds.). Tampere: Tampereen teknillinen yliopisto, p. 157-182 26 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  8. Published

    Experimental results in Component Cleanliness of Fluid Power

    Rinkinen, J., Elo, L., Kuosku, M. & Pekkonen, J., 2013, The 26th International Congress of Condition Monitoring and Diagnostic Engineering Management, COMADEM 2013, 11-13 June, Helsinki. 8 p. (International Congress of Condition Monitoring and Diagnostic Engineering Management).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  9. Published

    Kehitystä putkistopassin koulutusmateriaaliin

    Rinkinen, J. & Virta, S., 2010, In : Fluid Finland. 1/2010, p. 28-30

    Research output: Contribution to journalArticleScientific

  10. Published

    Recent advances in standardisation and education of fluid power in Finland

    Rinkinen, J., Lahtinen, J. & Virta, S., 2011, In : Maintworld, Maintenance & Asset Management. 3, 2, p. 14-18

    Research output: Contribution to journalArticleProfessional

  11. Published

    Hydraulikomponenttien käyttöikä

    Rinkinen, J. & Immonen, A., 2010, In : Fluid Finland. 1/2010, p. 8-11

    Research output: Contribution to journalArticleScientific

  12. Published

    Condition monitoring and in-line maintenance of oil in circulating lubrication system

    Rinkinen, J., 2010, Proceedings of the 3rd International Seminar Maintenance, Condition Monitoring and Diagnostics, September 29-30, 2010, Pohto, Oulu, Finland. Lahdelma, S. & Palokangas, K. (eds.). p. 136-151

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  13. Published

    Current research in component cleanliness of fluid power

    Rinkinen, J., Elo, L., Kuosku, M. & Pekkonen, J., 2013, The Tenth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, CM2013/MFPT2013, 18-20 June 2013, Krakow, Poland. Coxmoor Publishing, 17 p. (International Conference on Condition Monitoring and Machinery Failure Prevention Technologies).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  14. Published

    Clean Components of Fluid Power System Reduce Maintenance Costs

    Rinkinen, J. & Elo, L., 1 Oct 2015, Maintenance, Condition Monitoring and Diagnostics; Maintenance Performance Measurement and Management: MCMD 2015 and MPMM 2015. 8 p. 2 (2015-10-01)

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  15. Published

    Technical Cleanliness of Hose Assemblies in Fluid Power System

    Rinkinen, J., Huhturi, J. & Elo, L., 2 Jun 2016, 23rd International Conference on Hydraulics and Pneumatics, June 1 – 3, 2016, Prague, Czech Republic. 8 p. 2

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  16. Published

    Evaluating the structural complexity of a product family

    Rissanen, N., Malmqvist, J. & Pulkkinen, A., 2012, The 12th International Design Conference, DESIGN 2012, 21-24 May, 2012, Dubrovnik, Croatia. Dorian, M., Mario, S., Neven, P. & Nenad, B. (eds.). Zagreb: Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, p. 1597-1604 (International Design Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  17. Published

    Testing a framework for analyzing PLM architecture in global manufacturing companies

    Rissanen, N., Pulkkinen, A. & Vainio, V., 2012, The 22nd International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2012, 10-13 June, 2012, Helsinki, Finland. Hasse, N., Satu, K., Ville, T. & Seppo, T. (eds.). Tampere: Tampere University of Technology. Department of Production Engineering, p. 507-514 (International Conference on Flexible Automation and Intelligent Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  18. Published

    A Framework for Building Behavioral Models of Technical and Economic Systems

    Ritola, T., Coatanea, E., Micaëlli, J. P. & Mokhtarian, H., 21 Aug 2016, Proceedings of the ASME 2016 Computers and Information in Engineering Conference IDETC/CIE 2016. Charlotte, North Carolina

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  19. Published

    Temperature and fatigue effect on the maximum swimming speed of jack mackerel Trachurus japonicus

    Riyanto, M., Yanase, K. & Arimoto, T., 2014, In : Fisheries Science. 80, 1, p. 53-59 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  20. Published

    Oxy-fuel combustion and flue gases recirculation: Apparatus development, measurements and model

    Rodriguez, M., 2009, Tampere: Unknown Publisher. 27 p. (Tampereen teknillinen yliopisto, Energia- ja prosessitekniikan laitos. Raportti; vol. 190)

    Research output: Book/ReportCommissioned reportProfessional

  21. Published

    Coal char combustion under chemical kinetics controlled conditions

    Rodriguez Avila, M., Tolvanen, H., Siitonen, T. & Raiko, R., 2010, International Conference on Applied Energy (ICAE 2010), Energy Solutions for a Sustainable World, 21-23 April 2010, Singapore. p. 459-468

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  22. Published

    Driving feel generation of the mobile machine simulator with the water hydraulic 6-DOF motion platform

    Rokala, M., Sairiala, H. & Koskinen, K. T., 2010, 7th International Fluid Power Conference (7th IFK), 22-24 March 2010, Aachen, Germany. p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  23. Published

    The effect of pc-rate on peek-made slipper behaviour in water hydraulic axial piston unit

    Rokala, M. & Koskinen, K., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Tampere: Scandinavian International Conference on Fluid Power, p. 89-102 14 p. (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  24. Published

    Analysis of Slipper Structures in Water Hydraulic Axial Piston Pumps

    Rokala, M., 2012, Tampere: Tampere University of Technology. (Tampereen teknillinen yliopisto, Julkaisu; no. 1055)

    Research output: Book/ReportDoctoral thesisMonograph

  25. Published

    Comparison of slipper structures in water hydraulic axial piston pump

    Rokala, M. & Koskinen, K. T., 2010, 6th FPNI-PhD Symposium, June 15-19, 2010, West Lafayette, USA.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  26. Published

    The effect of microstructure and lead content on the tribological properties of bearing alloys

    Ruusila, V., Nyyssönen, T., Kallio, M., Vuorinen, P., Lehtovaara, A., Valtonen, K. & Kuokkala, V-T., 2012, 15th Nordic Symposium of Tribology, 12 - 15 June 2012 Trondheim, Norway. Trondheim: Nordic Symposium on Tribology; Tribology Lab, Norwegian University of Science and Technology, p. 1-6 6 p. (Nordic Symposium on Tribology).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  27. Published

    The effect of microstructure and lead content on the tribological properties of bearing alloys

    Ruusila, V., Nyyssönen, T., Kallio, M., Vuorinen, P., Lehtovaara, A., Valtonen, K. & Kuokkala, V-T., 2013, In : Proceedings of the institution of Mechanical Engineers Part J: Journal of Engineering Tribology. 227, 8, p. 878-887 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  28. Published

    Challenge of teaching TRIZ for university students

    Ryynänen, L. E. & Riitahuhta, A., 2010, Proceedings of The 10th ETRIA World Triz Future Conference 2010, 3-5- November, 2010, Bergamo, Italy. Rizzi, C. (ed.). Bergamo University Press, p. 323-324

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  29. Published

    Developing engineering creativity in the early design stages of product development process

    Ryynänen, L. & Riitahuhta, A., 2010, Proceedings of The First International Conference on Design Creativity, ICDC 2010, 29 November-1 December, 2010, Kobe, Japan. p. 8 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  30. Published

    Evaluation of the teaching of a simple theory through different teaching disciplines

    Saarenrinne, P., 2012, ICERI2012 Proceedings, 5th International Conference of Education, Research and Innovation 19.-21.11.2012, Madrid, Spain. Barcelona: International Association of Technology, Education and Development IATED, p. 939-942 (International Conference of Education, Research and Innovation).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  31. Published

    Learning experience of a simple theory through different learning styles

    Saarenrinne, P., 2012, EDULEARN12 Proceedings, 4th International Conference on Education and New Learning Technologies, 2-4 July, 2012, Barcelona, Spain. Gomez Chova, L., Candel Torres, I. & Lopez Martinez, A. (eds.). International Association of Technology, Education andDevelopment IATED, p. 7653-7656 (International Conference on Education and New Learning Technologies).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  32. Published

    Local oscillation of the boundary layer over the surface of swimming rainbow trout: implications for active drag reduction

    Saarenrinne, P. & Yanase, K., 15 Sep 2015, Proceedings of the 11TH International Symposium on Particle Image Velocimetry – PIV15 . 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  33. Published

    Digital image correlation method in hydro turbine shaft torque and vibration monitoring

    Saarenrinne, P., Miettinen, J., Ylönen, M. & Kokko, V., 27 Oct 2015, Proceedings of the Hydro 2015 Bordeaux 26-28 October 2015. Hydro Power & Dams, 8 p. 08.06

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  34. Published

    Results of CMM standalone tests at DTP2

    Saarinen, H., Kivelä, T., Zhai, L., Hämäläinen, V., Karjalainen, J-P., Aha, L., Heikkilä, L., Mäkinen, H., Järvenpää, J., Kiviranta, S., Krassi, B., Viinikainen, M., Siuko, M., Mattila, J., Esque, S. & Semeraro, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 1907-1910

    Research output: Contribution to journalArticleScientificpeer-review

  35. Published

    Elintarviketeollisuuden koneautomaation kehitys kaipaa tiivistämistä

    Sairiala, H. & Koskinen, K. T., 2012, In : Kehittyvä elintarvike. 23, 4, p. 12-13

    Research output: Contribution to journalArticleProfessional

  36. Published

    Proportional valve control of water-hydraulic systems

    Sairiala, H. & Koskinen, K. T., 2012, Topic water hydraulics, Dutch Fluid Power Conference, Ede, The Netherlands 13th September 2012. Vereniging Platform Hydrauliek, p. 49-63 (Dutch Fluid Power Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  37. Published

    Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland

    Sairiala, H. (ed.) & Koskinen, K. T. (ed.), 2011, Tampere: Tampere University of Technology.

    Research output: Book/ReportAnthologyScientificpeer-review

  38. Published

    Numerical modelling of bit-rock interaction in percussive drilling

    Saksala, T., 2010, ECCM 2010, IV European Conference on Computational Mechanics, May 16-21, 2010, Paris, France. p. 1-2 2 p. 2078

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  39. Published

    3D numerical modelling of bit-rock fracture mechanisms in percussive drilling with a multiple-button bit

    Saksala, T., 2013, In : International Journal for Numerical and Analytical Methods in Geomechanics. 37, 3, p. 309-324

    Research output: Contribution to journalArticleScientificpeer-review

  40. Published

    Two-step Exact Solution for Modified Mohr-Coulomb Viscoplastic Consistency Model with Linear Hardening/Softening: A Proof with Maple Software

    Saksala, T., 2012, In : American Journal of Computational and Applied Mathematics. 2, 1, p. 41-45

    Research output: Contribution to journalArticleScientificpeer-review

  41. Published

    Numerical and experimental study of percussive drilling with a triple-button bit on Kuru granite

    Saksala, T., Gomon, D., Hokka, M. & Kuokkala, V-T., 2014, In : International Journal of Impact Engineering. 72, p. 56-66 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  42. Published

    Numerical modeling and experimentation of dynamic indentation with single and triple indenters on Kuru granite

    Saksala, T., Gomon, D., Hokka, M. & Kuokkala, V-T., 2013, Rock Dynamics and Applications - State of the Art, Proceedings of the first international conference on rock dynamics and applications, RocDyn-1, Lausanne, Switzerland, 6-8 June 2013. Zhao, J. & Li, J. (eds.). Boca Raton: CRC Press Taylor & Francis Group : A Belkema Book, p. 415-421 7 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  43. Published

    Combined continuum damage-embedded discontinuity model for explicit dynamic fracture analyses of quasi-brittle materials

    Saksala, T., Brancherie, D., Harari, I. & Ibrahimbegovic, A., 2015, In : International Journal for Numerical Methods in Engineering. 101, 3, p. 230-250 21 p.

    Research output: Contribution to journalArticleScientificpeer-review

  44. Published

    Erratum: 3D numerical modelling of bit-rock fracture mechanisms in percussive drilling with a multiple-button bit (vol 37, pg 309, 2013)

    Saksala, T., 2013, In : International Journal for Numerical and Analytical Methods in Geomechanics. 37, 3, p. 325-330 6 p.

    Research output: Contribution to journalArticleScientific

  45. Published

    Numerical modelling of bit-rock fracture mechanisms in percussive drilling with a continuum approach

    Saksala, T., 2011, In : International Journal for Numerical and Analytical Methods in Geomechanics. 35, 13, p. 1483-1505

    Research output: Contribution to journalArticleScientificpeer-review

  46. Published

    Impact Modeling by Manifold Approach in Explicit Transient Dynamics

    Saksala, T. & Mäkinen, J., 2011, COMPDYN 2011, 3rd International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, 25-28 May 2011, Corfu, Greece. Corfu: COMPDYN, p. 1-13 13 p. (International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering COMPDYN).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  47. Published

    Yksinkertainen J2-plastisuus-vauriomalli metalleille

    Saksala, T., 2012, Proceedings of the 11th Finnish Mechanics Days. XI Suomen Mekaniikkapäivät, Oulun yliopisto 29.-30.11.2012. Hannu, K. & Mikko, M. (eds.). Oulu: Oulun yliopisto, p. 177-182 (Finnish Mechanics Days. Suomen Mekaniikkapäivät).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  48. Published

    Numerical modeling and experimentation of dynamic Brazilian disc test on Kuru granite

    Saksala, T., Hokka, M., Kuokkala, V-T. & Mäkinen, J., 2013, In : International Journal of Rock Mechanics and Mining Sciences. 59, April, p. 128-138 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  49. Published

    Numerical modelling of bit-rock interaction in percussive drilling by manifold approach

    Saksala, T. J. & Mäkinen, J. M., 2010, Proceedings of NSCM-23: the 23rd Nordic Seminar on Computational Mechanics NSCM-23, 21-22 October 2010, Stockholm, Sweden. Eriksson, A. & Tibert, G. (eds.). p. 247-250

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  50. Published

    Rate dependent embedded discontinuity approach incorporating heterogeneity for numerical modelling of rock fracture

    Saksala, T., 2015, In : Rock Mechanics and Rock Engineering. 48, 4, p. 1605-1622 18 p.

    Research output: Contribution to journalArticleScientificpeer-review

Download list To download, please limit the number of search results to 1,000 or less.