Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. Published

    Mikro- ja Desktop-tuotantojärjestelmät

    Heikkilä, R., Vuola, A., Prusi, T., Siltala, N. & Tuokko, R., 2011, Automaatio XIX Seminaari, 15-16.3.2011, Helsinki. SAS julkaisusarja. Visala, A. (ed.). Helsinki: Suomen Automaatioseura, p. 1-6 6 p. (Automaatio Seminaari; vol. 41).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  2. Published

    Adaptive gripper system for small optical assemblies

    Heikkilä, R., Prusi, T., Ha, T. H., Song, J. Y., Lee, C. W. & Tuokko, R., 2010, Proceedings of the 7th International Workshop on Microfactories, IWMF 2010, 24-27 October, 2010, Daejeon, Korea. p. 308-312

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  3. Published

    Development of micro gripper systems for microfactories

    Heikkilä, R., Remes, M., Prusi, T. & Tuokko, R., 2008, Proceedings of the 4th International Workshop on Microfactory Technology, 10-11 July, 2008, Jeju-do, Korea. p. 4 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  4. Published

    New Power Management System for Fluid Power Applications

    Heikkilä, M., 2011, Proceedings of the 5th GIM Scientific Workshop at Aalto University School of Electrical Engineering 29.-30.11.2011. Espoo: Aalto University, p. 131-138 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  5. Published

    Comparison of proportional control and displacement control using digital hydraulic power management system

    Heikkilä, M., Karvonen, M., Linjama, M., Tikkanen, S. & Huhtala, K., 2014, ASME/BATH 2014 Symposium on Fluid Power and Motion Control, FPMC2014, September 10-12, 2014, Bath, United Kingdom. The American Society of Mechanical Engineers ASME, p. 1-8 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  6. Published

    Advances in the TUT microfactory concept development

    Heikkilä, R., Järvenpää, E. & Tuokko, R., 2010, In : International Journal of Automation Technology. 4, 2, p. 117-126

    Research output: Contribution to journalArticleScientificpeer-review

  7. Published

    Direct connection of digital hydraulic power management system and double acting cylinder - a simulation study

    Heikkilä, M. & Linjama, M., 2011, The Fourth Workshop on Digital Fluid Power, 21st-22nd November, 2011, Linz, Austria. Linz: DFP-Workshops, p. 59-74 (Workshop on Digital Fluid Power; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  8. Published

    Improving damping characteristics of displacement controlled digital hydraulic system

    Heikkilä, M. & Linjama, M., 2012, DFP 12, Proceedings of the fifth workshop on digital fluid power, October 24-25, 2012, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). Tampere: Tampere University of Technology. Department of Intellidgent Hydraulics and Automation, p. 75-88 (Workshop on digital fluid power).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  9. Published

    Experimental evaluation of a digital hydraulic power management system

    Heikkilä, M., Tammisto, J., Huova, M., Huhtala, K. & Linjama, M., 2010, Proceedings of the Third Workshop on Digital Fluid Power, October 13-14 2010, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). p. 129-142

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  10. Published

    Analysis of the new architecture proposal for the CMM control system

    Heikkilä, L., Saarinen, H., Aha, L., Viinikainen, M., Mattila, J., Hahto, A., Siuko, M. & Semeraro, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 2071-2074

    Research output: Contribution to journalArticleScientificpeer-review

  11. Published

    Displacement control of a mobile crane using a digital hydraulic power management system

    Heikkilä, M. & Linjama, M., 2013, In : Mechatronics. 23, 4, p. 452-461 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  12. Published

    Digital Hydraulic Power Management System - Measured Characteristics of a Second Prototype

    Heikkilä, M., Tammisto, J., Linjama, M. & Huhtala, K., May 2016, Proceedings of the Eighth Workshop on Digital Fluid Power (DFP16) . Uusi-Heikkilä, J. & Linjama, M. (eds.). p. 69-81 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  13. Published

    Fault-tolerant control of a multi-outlet digital hydraulic pump-motor

    Heikkilä, M. & Linjama, M., Mar 2018, Fluid power networks: Proceedings of the 11th International Fluid Power Conference, 19th-21st March 2018, Aachen. Murrenhoff, H. (ed.). Aachen University: RWTH Publications, Vol. 1. p. 145-157 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  14. Published

    Digital hydraulic multi-pressure actuators - simulation study of a forwarder crane

    Heikkilä, M., Huova, M. & Linjama, M., 28 Feb 2019, The 10th Workshop on Digital Fluid Power : February 28th - March 1st, 2019, Linz, Austria. Linz Center of Mechatronics, 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  15. Published

    Parhaat tuottavat - Valmistavan teknologiateollisuuden tutkimusagenda 2020

    Heilala, J. (ed.), Majuri, M. (ed.), Sääski, J. (ed.), Pesonen, J. (ed.), Halme, J. (ed.), Hyötyläinen, R. (ed.), Hentula, M. (ed.), Paro, J. (ed.) & Tuokko, R. (ed.), 2011, Helsinki: Tekes, VTT, TTY, Teknologiateollisuus ry.

    Research output: Book/ReportAnthologyScientificpeer-review

  16. Published

    Simulation as a Tool in Evaluating Combat Aircraft Shock Absorber Condition

    Heininen, A., Aaltonen, J., Koskinen, K. T. & Huitula, J., 2016, Proceedings of the 10th World Congress on Engineering Asset Management (Wceam 2015). Koskinen, KT., Kortelainen, H., Aaltonen, J., Uusitalo, T., Komonen, K., Mathew, J. & Laitinen, J. (eds.). Springer-Verlag, Berlin, p. 249-257 9 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  17. Published

    Simulating the Drag Coefficient of a Spherical Autonomous Underwater Vehicle

    Heininen, A., Aaltonen, J. & Koskinen, K. T., 9 Oct 2017, Proceedings of the 2nd Annual SMACC Research Seminar 2017. Aaltonen, J., Virkkunen, R., Koskinen, K. T. & Kuivanen, R. (eds.). Tampere: Tampere University of Technology, Vol. 2. p. 53-56 4 p. 14

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  18. Accepted/In press

    Gas-liquid ratio imbalance indicators of a fighter aircraft shock absorber

    Heininen, A., Aaltonen, J., Koskinen, K. & Huitula, J., 2019, (Accepted/In press) Proceedings of the 13th World Congress on Engineering Asset Management: WCEAM, 24-26 September 2018, Stavanger, Norway. Springer-Verlag, Berlin

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  19. Published

    Multi-criteria optimization and decision making for single family house

    Heinisuo, M., Tiainen, T., Mela, K. & Laasonen, M., 2012, ICCCBE 2012, 14th International Conference on Computing in Civil and Building Engineering, June 27-29, 2012, Moscow, Russia. Telichenko, V., Volkov, A. & Bilchuk, I. (eds.). Moscow State University of Civil Engineering. Publishing House "ASV", p. 1-8 8 p. (International Conference on Computing in Civil and Building Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  20. Published

    The role of microstructure in high stress abrasion of white cast irons

    Heino, V., Kallio, M., Valtonen, K. & Kuokkala, V-T., 2016, The 17th Nordic Symposium on Tribology - NORDTRIB 2016 14th - 17th June 2016 Aulanko, Hämeenlinna, Finland.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  21. Published

    Optimal design of stiffened plate using metamodeling techniques

    Heinonen, O. & Pajunen, S., 2011, In : Rakenteiden mekaniikka. 44, 3, p. 218-230

    Research output: Contribution to journalArticleScientificpeer-review

  22. Published

    Structured ZnO films: Effect of copper nitrate addition to precursor solution on topography, band gap energy and photocatalytic activity

    Heinonen, S., Nikkanen, J. P., Kaleva, A., Hyvärinen, L. & Levänen, E., 15 Feb 2017, In : IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING. 175, 1, 012042.

    Research output: Contribution to journalArticleScientificpeer-review

  23. Published

    Effect of oil viscosity on filter performance in lubrication oil system

    Heiskanen, V., Mäkelä, T., Kapanen, P. & Rinkinen, J., 2012, Proceedings of the 11th World Filtration Congress & Exhibition, WFC11, April 16-20, 2012, Graz, Austria. Vienna, Austria: Gesellschaft Österreichischer Chemiker GÖCH, p. 1-15 15 p. (World Filtration Congress).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  24. Published

    Virtual machine laboratory based on m1-technology

    Helminen, M., Palonen, T., Rokala, M., Ranta, P., Mäkelä, T. & Koskinen, K. T., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Tampere: Scandinavian International Conference on Fluid Power, p. 321-334 (Scandinavian International Conference on Fluid Power SICFP; vol. 12).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  25. Published

    A New Method and Format for Describing CANopen System Topology

    Helminen, M., Salonen, J., Saha, H., Nykänen, O., Koskinen, K. T., Ranta, P. & Pohjolainen, S., 2012, Proceedings of the 13th International CAN Conference, iCC 2012 in Hambach Castle, March 5 to March 6, Germany. CAN in Automation e.V., p. 1-8 8 p. (International CAN Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  26. Published

    Optimization and energy consumption of electro-hydraulic valve actuation system through valve event timing range

    Herranen, M., Huhtala, K. & Vilenius, M., 2010, Fluid Power and Motion Control (FPMC 2010), 15-17 September 2010, University of Bath, UK. Johnston, D. N. & Plummer, A. (eds.). p. 433-445

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  27. Published

    Electro hydraulic gas exchange valve actuation of 4-stroke large bore diesel engine

    Herranen, M. & Huhtala, K., 2014, 8th FPNI Ph.D Symposium on Fluid Power, FPNI2014, June 11-13, 2014, Lappeenranta, Finland. The American Society of Mechanical Engineers ASME, p. 1-11 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  28. Published

    Valve train with learning control features

    Herranen, M., Virvalo, T., Huhtala, K., Glader, T. & Kallio, I., 2010, 26th CIMAC World Congress on Combustion Engine Technology for Ship Propulsion Power Generation Rail Traction. June, 14-17, 2010, Bergen, Norway. p. 1-10 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  29. Published

    Fully variable valve actuation in large bore diesel engines

    Herranen, M., 3 Oct 2014, Tampere: Tampere University of Technology. 115 p. (Tampere University of Techology. Publication; vol. 1239)

    Research output: Book/ReportDoctoral thesisMonograph

  30. Published

    The energy balance of the electro-hydraulic linear actuation system

    Herranen, M., Huhtala, K. & Vilenius, M., 2010, In : Journal of Energy and Power Engineering. 4, 8, p. 57-63

    Research output: Contribution to journalArticleScientific

  31. Published

    Control arrangement of an electro-hydraulic gas exchange valve actuation system

    Herranen, M., Huhtala, K. & Virvalo, T., 2013, Patent No. Pat. EP 2 529 090 B1, Priority date 3 Jul 2013, Priority No. (30) FI 20105082

    Research output: PatentScientific

  32. Published

    Energy distribution and optimization of the valve controlled actuation system

    Herranen, M., 2011, Proceedings of the 5th GIM Scientific Workshop at Aalto University School of Electrical Engineering 29.-30.11.2011. Espoo: Aalto University, p. 111-124 14 p. (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  33. Published

    Engine gas exchange controlled by digital hydraulics

    Herranen, M., Siivonen, L. & Huhtala, K., 2011, Proceedings of the 2nd International Conference on Measurement and Control Engineering, ICMCE 2011, October 21-22, 2011, Puerto Rico, USA. New York, NY: ASME Press, p. 1-7 7 p. (International Conference on Measurement and Control Engineering ICMCE; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  34. Published

    Analysis of Adaptive/Learning Control Methods in Cyclic Hydraulic System

    Herranen, M., Enlund, J., Uusisalo, J. & Huhtala, K., 2012, Proceedings of the 8th International Fluid Power Conference, Dresden, March 26-28, 2012. Dresden: Technische Universität Dresden, Institute of Fluid Power, p. 399-410 (International Fluid Power Conference; vol. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  35. Published

    AMAD-painekytkimien laboratoriotestaus

    Hietala, J-P., 2009, Lentotekniikan rakennetutkimuksen neuvottelupäivät VII, 27.-28.8.2009, Tampere. Aaltonen, J. (ed.). p. 1-14 14 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  36. Published

    Aircraft hydraulic system model integration to fligh simulation model

    Hietala, J-P., Aaltonen, J., Koskinen, K. T. & Vilenius, M., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Tampere: Scandinavian International Conference on Fluid Power, p. 271-280 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  37. Published

    Novel Procedure for Supporting Maintenance of Mobile Work Machines Using R&D Simulators

    Hietala, J-P., Krogerus, T., Multanen, P., Hyvönen, M. & Huhtala, K., 2014, The Eleventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, CM2014 / MFPT2014, 10-12 June 2014, Manchester, UK. The British Institute of Non-Destructive Testing, p. 1-9 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  38. Published

    Comparison between an aircraft speed brake actuator high order linear model and a semi-empirical non-linear model in real time simulation

    Hietala, J-P., Aaltonen, J., Koskinen, K. T. & Vilenius, M., 2011, AST 2011, 3rd International Workshop on Aircraft System Technologies, March 31 - April 1, 2011, Hamburg, Germany. Hamburg: Hamburg University of Technology, p. 65-71 (International Workshop on Aircraft System Technologies AST; vol. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  39. Published

    Development of process for adaptive lifetime estimation of mechanical assemblies using accelerated testing methods

    Hietala, J-P., Ojala, P., Multanen, P., Miettinen, J. & Saarenrinne, P., 26 Oct 2016, Risk, Reliability and Safety: Innovating Theory and Practice : Proceedings of the 26th European Safety and Reliability Conference, ESREL 2016, Glasgow, Scotland, 25-29 September 2016. Walls, L., Revie, M. & Bedford, T. (eds.). CRC Press; Taylor & Francis, 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  40. Published

    Fatigue Lifetime Estimation of Machine Component Using Accelerated Testing

    Hietala, J-P., Ojala, P., Multanen, P., Miettinen, J. & Saarenrinne, P., 2017, ESREL 2017. CRC Press

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  41. Published

    Effect of start-up schemes and amplitude of tangential motion on friction behavior in fretting point contact

    Hintikka, J., Lehtovaara, A. & Lönnqvist, C., 2011, In : Tribology International. 44, 11, p. 1535-1543

    Research output: Contribution to journalArticleScientificpeer-review

  42. Published

    Fretting fatigue and friction of quenched and tempered steel in dry contact with aluminum bronze

    Hintikka, J., Lehtovaara, A. & Mäntylä, A., 2013, In : Wear. 308, 1-2, p. 155-165 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  43. Published

    Fretting fatigue of quenched and tempered steel in contact with bronze

    Hintikka, J., Lehtovaara, A. & Mäntylä, A., 2012, 15th Nordic Symposium on Tribology, NordTrib 2012, 12-15 June 2012, Trondheim, Norway. Trondheim: NTNU Norwegian University of Science and Technology, p. 1-6 6 p. (Nordic Symposium on Tribology).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  44. Published

    Evolvable micro production systems: specific needs and differences to macro

    Hofmann, A., Bretthauer, G., Siltala, N. & Tuokko, R., 2011, IEEE International Symposium on Assembly and Manufacturing, ISAM 2011, 25-27 May, 2011, Tampere Hall, Tampere, Finland. Piscataway, NJ: IEEE, p. 1-6 6 p. (IEEE International Symposium on Assembly and Manufacturing ISAM).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  45. Published

    Dynamic Fracture and Fragmentation of Heat Shocked Granites

    Hokka, M., Mardoukhi, A. & Kuokkala, V-T., 2017, 14th International conference of Fracture: Proceedings of ICF 14. Rhodes, Greece

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  46. Published

    Digital Image Correlation as a Measurement Tool for Heart Surgery

    Hokka, M., 2017, Proceedings of the Annual Meeting of the International Digital Image Correlation Society, Barcelona.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  47. Published

    Prediction of the Transient Effects in Glassy Polymers

    Holopainen, S., 2012, Proceedings of the 11th Finnish Mechanics Days. XI Suomen Mekaniikkapäivät, Oulun yliopisto 29.-30.11.2012. Hannu, K. & Mikko, M. (eds.). Oulu: Oulun yliopisto, p. 9-14 (Finnish Mechanics Days. Suomen Mekaniikkapäivät).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  48. Published

    Symmetrization of Tensors on General Spaces and Their Applications in Continuum Mechanics

    Holopainen, S., 2009, Proceedings of 7th EUROMECH Solid Mechanics Conference - Lectures and General Sessions. Ambrosio, J. A. C. & Silva, M. P. T. (eds.). APMTAC, p. 63-64 2 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  49. Published

    A model for scheduling of employees using supplier selection

    Holopainen, S., 2014, Engineering optimization IV, Proceedings of the International Conference on Engineering Optimiztion (ENGOPT 2014), Lisbon, Portugal, 8-11 September 2014. Rodrigues, H. C., Herskovits, J., Mota Soares, C. M., Guedes, J. M., Araújo, A. L., Folgado, J. O., Moleiro, F. & Madeira, J. F. A. (eds.). The Netherlands: CRC Press/Balkema, p. 533-538 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  50. Published

    Representations of m-linear functions on tensor spaces: Duals and transpositions with applications in continuum mechanics

    Holopainen, S., 2014, In : Mathematics and Mechanics of Solids. 19, 2, p. 168-192 25 p.

    Research output: Contribution to journalArticleScientificpeer-review

Previous 1 2 3 4 5 6 7 8 ...25 Next
Download list To download, please limit the number of search results to 1,000 or less.