Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. Published

    An executable capability concept in formal resource descriptions

    Siltala, N., Järvenpää, E. & Lanz, M., Sep 2018, In : IFAC-PapersOnLine. 51, 11, p. 102-107 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  2. Published

    Creating resource combinations based on formally described hardware interfaces

    Siltala, N., Järvenpää, E. & Lanz, M., 2019, Precision Assembly in the Digital Age - 8th IFIP WG 5.5 International Precision Assembly Seminar, IPAS 2018, Revised Selected Papers. Springer New York LLC, Vol. 530. p. 29-39 11 p. (IFIP Advances in Information and Communication Technology; vol. 530).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  3. Published

    Jammed on/off valve fault compensation with distributed digital valve system

    Siivonen, L., Linjama, M., Huova, M. & Vilenius, M., 2009, In : International Journal of Fluid Power. 10, 2, p. 73-82

    Research output: Contribution to journalArticleScientificpeer-review

  4. Published

    Digitaalinen Hydraulisäätö - tulevaisuuden tekniikkaa?

    Siivonen, L., 2012, In : Promaint. 26, 7, p. 41-43

    Research output: Contribution to journalArticleProfessional

  5. Published

    Detecting of faults in a valve system and a fault tolerant control

    Siivonen, L. & Linjama, M., 2012, Patent No. Pat. US 8215227 B2, Priority date 10 Jul 2012, Priority No. (21) 11/991559;(30) FI 20055479

    Research output: PatentScientific

  6. Published

    Fault Tolerance with digital Hydraulic Valve System

    Siivonen, L., Linjama, M. & Vilenius, M., 2011, The Eight International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 20-22 June 2011, Cardiff, Wales. Northamption: British Institute of Non-destructive Testing, p. 1250-1262 (International Conference on Condition Monitoring and Machinery Failure Prevention Technologies; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  7. Published

    Hydraulic Damper Concept for Thruster Ice Impact Load Reduction

    Siivonen, L. & Huhtala, K., 19 Oct 2017, ASME/BATH 2017 Symposium on Fluid Power and Motion Control. Sarasota, FL, USA: ASME, 10 p. FPMC2017-4238

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  8. Published

    The role of university centre for continuing education in the creation and implementation of innovation management education

    Siekkinen, R. & Riitahuhta, A., 2009, The 17th International Conference on Engineering Design ICED'09, 24-27 August, 2009, Stanford, California, USA. p. 195-202

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  9. Published

    The role of the university centre for continuing engineering education in the creation and implementation of innovation management program

    Siekkinen, R. & Riitahuhta, A., 2010, NordDesign 2010 Conference, 25-27 August, 2010, Göteborg, Sweden. Dagman, A. & Söderberg, R. (eds.). p. 7 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  10. Published

    Simulation-based design process for the verification of ITER remote handling systems

    Sibois, R., Määttä, T., Siuko, M. & Mattila, J., 2014, In : Fusion Engineering and Design. p. 2341-2346 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  11. Published

    Enhancement of the use of digital mock-ups in the verification and validation process for ITER remote handling systems

    Sibois, R., Salminen, K., Siuko, M., Mattila, J. & Määttä, T., 2013, In : Fusion Engineering and Design. 88, 9-10, p. 2190-2193 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  12. Published

    Verification and Validation of ITER Remote handling System Requirment Using Digital Mocks-Ups

    Sibois, R., Salminen, K., Siuko, M. & Mattila, J., 2011, European Nuclear Young Generation Forum, ENYGF 2011, 17.5.-22.5.2011, Praha. Prague: ENYGF, p. 1-4 4 p. (European Nuclear Young Generation Forum ENYGF).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  13. Published

    Early design verification of ITER remote handling systems using Digital Mock-Ups within simulation lifecycle environment

    Sibois, R., Määttä, T., Siuko, M. & Mattila, J., 2013, 2013 IEEE 25th Symposium on Fusion Engineering, SOFE 2013, San Francisco, CA, USA, 10.-14.6.2013. Institute of Electrical and Electronics Engineers IEEE, p. 1-6 6 p. (IEEE Symposium on Fusion Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  14. Published

    Vibration analysis and robust control of highly deformable beams in a heavy pinched loop configuration

    Sharma, N., Kern, D. & Seemann, W., 2014, In : Zeitschrift fur Angewandte Mathematik und Physik. p. 1-14 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  15. Published

    Unexpectedly low angular extent of journal bearing pressures: experiment and theory

    Sharma, N., Vimal, T. & Chatterjee, A., 2015, In : Zeitschrift fur Angewandte Mathematik und Physik. 66, 2, p. 455-471 17 p.

    Research output: Contribution to journalArticleScientificpeer-review

  16. Published

    Manufacturing sustainability: a comparison of Indian and Finnish manufacturers' vision and current state

    Shankar, K., Koho, M., Wan, H., Torvinen, S. & Chen, F. F., 2012, The 22nd International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2012, 10-13 June, 2012, Helsinki, Finland. Hasse, N., Satu, K., Ville, T. & Seppo, T. (eds.). Tampere: Tampere University of Technology. Department of Production Engineering, p. 491-498 (International Conference on Flexible Automation and Intelligent Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  17. Published

    Kantavuutta maaperään massastabiloinnilla

    Seppälä, J. & Rinkinen, J., 2013, In : Promaint. 27, 3, p. 42-44 3 p.

    Research output: Contribution to journalArticleProfessional

  18. Published

    Synchronous Full-Field Strain and Temperature Measurement in Tensile Tests at Low, Intermediate and High Strain Rates

    Seidt, J. D., Kuokkala, V-T., Smith, J. L. & Gilat, A., Feb 2017, In : Experimental Mechanics. 57, 2, p. 219–229

    Research output: Contribution to journalArticleScientificpeer-review

  19. Published

    Safety monitoring system for a manufacturing workstation using 6LoWPAN technologies

    Sedlacek, T., Jokinen, J., Postelnicu, C. & Martinez Lastra, J. L., 2012, Proceedings of 2012 IEEE International Conference on Systems, Man, and Cybernetics, SMC 2012, 14-17 October, 2012, COEX, Seoul, Korea. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, p. 1581-1585 (International Conference on Systems, Man, and Cybernetics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  20. Published

    Why social sustainability counts: The impact of corporate social sustainability culture on financial success

    Schönborn, G., Berlin, C., Pinzone, M., Hanisch, C., Georgoulias, K. & Lanz, M., 1 Jan 2019, In : Sustainable Production and Consumption. 17, p. 1-10 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  21. Published

    Glass tempering modeling

    Schneider, J., Karvinen, R. & Nielsen, J., 2012, COST Training School "Structural Glass", Presentation Handouts, Ghent University, Ghent, Belgium, April 2-6, 2012. University Press BVBA, p. 281-309 (COST Action TU0905 "Structural Glass - Novel Design Methods and Next Generation Products").

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  22. Published

    Activity report of COST Action TU0905 Working Group 2 – Material characterization and material improvement

    Schneider, J., Karvinen, R., Vandebroek, M. & Savineau, G., 2014, Proceedings volume of the Challenging Glass 4 & COST Action TU0905 Final Conference, 6-7 February 2014 at the EPFL in Lausanne, Switzerland. Louter, C., Bos, F., Belis, J. & Lebet, J-P. (eds.). CRC Press, p. 21-24 4 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  23. Published

    Stress relaxation in tempered glass caused by heat soak testing

    Schneider, J., Hilcken, J., Aronen, A., Karvinen, R., Olesen, J. F. & Nielsen, J., 1 Sep 2016, In : Engineering Structures. 122, p. 42-49 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  24. Published

    Is the future of fluid power digital?

    Scheidl, R., Linjama, M. & Schmidt, S., 2012, In : Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering. 226, 6, p. 721-723

    Research output: Contribution to journalArticleScientificpeer-review

  25. Published

    An experimental investigation of scuffing initiation due to axial displacement in a rolling/sliding contact

    Savolainen, M. & Lehtovaara, A., Mar 2018, In : Tribology International. 119, p. 688-697

    Research output: Contribution to journalArticleScientificpeer-review

  26. Published

    An approach to investigating subsurface fatigue in a rolling/sliding contact

    Savolainen, M. & Lehtovaara, A., 2018, In : International Journal of Fatigue. 117, p. 180-188

    Research output: Contribution to journalArticleScientificpeer-review

  27. Published

    An Investigation into Scuffing and Subsurface Fatigue in a Lubricated Rolling/Sliding Contact

    Savolainen, M., 28 Jun 2019, Tampere University. 81 p. (Tampere University Dissertations; vol. 57)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  28. Published

    Advanced analysis of complex signals

    Saramäki, T., 2013, In : Public Service Review. 25, p. 314-315 2 p.

    Research output: Contribution to journalArticleGeneral public

  29. Published

    A packet scheduler for real-time 6LoWPAN wireless networks in manufacturing systems

    Santillan Martinez, G., Delamer, I. M. & Martinez Lastra, J. L., 2014, In : Journal of Intelligent Manufacturing. 10845, 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  30. Published

    Laser produced grinding burns for Barkhausen noise measurement result validation

    Santa-Aho, S., Sorsa, A., Vippola, M., Latokartano, J., Lindgren, M. & Lepistö, T., 2010, The Seventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies CM2010 / MFPT 2010, 22-24 June 2010, Ettington Chase, Stratford-upon-Avon, England. p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  31. Published

    Optimized laser processing of calibration blocks for grinding burn detection with Barkhausen noise

    Santa-aho, S., Vippola, M., Sorsa, A., Lindgren, M., Latokartano, J., Leiviskä, K. & Lepistö, T., 2012, In : Journal of Materials Processing Technology. 212, p. 2282-2293

    Research output: Contribution to journalArticleScientificpeer-review

  32. Published

    Development of a test device for the evaluation of journal bearings

    Sandvik, K., Lehtovaara, A., Makkonen, E., Kallio, M., Kuvaja, K. & Kuokkala, V-T., 2012, In : Tribologia - Finnish Journal of Tribology. 31, 1-2, p. 12-21

    Research output: Contribution to journalArticleScientificpeer-review

  33. Published

    Weighting function selection problem in the Galerkin method

    Salonen, E-M., Kouhia, R. & Holopainen, R., 2013, In : International Journal of Mechanical Engineering Education. 41, 2, p. 115-135 21 p.

    Research output: Contribution to journalArticleScientificpeer-review

  34. Published

    An implementation of a semantic, web-based virtual machine laboratory prototyping environment

    Salonen, J., Nykänen, O., Ranta, P., Nurmi, J., Helminen, M., Rokala, M., Palonen, T., Alarotu, V., Koskinen, K. & Pohjolainen, S., 2011, In : Lecture Notes in Computer Science. 7032, p. 221-236

    Research output: Contribution to journalArticleScientificpeer-review

  35. Published

    Categorization of ITER remote handling operations

    Salminen, K., Aha, L., Saarinen, H., Siuko, M., Mattila, J. & Semeraro, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 2075-2077

    Research output: Contribution to journalArticleScientificpeer-review

  36. Published

    Role based self-organisation of reconfigurable robotized compact systems for sustainable manufacturing

    Salminen, K., Nylund, H. & Andersson, P., 2012, The 22nd International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2012, 10-13 June, 2012, Helsinki, Finland. Hasse, N., Satu, K., Ville, T. & Seppo, T. (eds.). Tampere: Tampere University of Technology. Department of Pruduction Engineering, p. 8 (International Conference on Flexible Automation and Intelligent Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  37. Published

    Integrated product/process system for next generation manufacturing

    Salminen, K., 2011, Tampere Manufacturing Summit 2011, Lean and Sustainable, 23-25 May, 2011, Tampere Hall, Tampere, Finland. Tampere: Tampere Manufacturing Summit, (Tampere Manufacturing Summit, Lean and Sustainable).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  38. Published

    Status of DTP2 - Test Facility for ITER Divertor Maintenance

    Salminen, K., Siuko, M., Karjalainen, J., Sibois, R. & Mattila, J., 2011, European Nuclear Young Generation Forum, ENYGF 2011, 17.5.-22.5.2011, Praha. Prague: ENYGF, p. 1-6 6 p. (European Nuclear Young Generation Forum ENYGF).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  39. Published

    Role based self-adaptation of reconfigurable robotized systems for sustainable manufacturing

    Salminen, K. & Kovac, I., 2012, The 22nd International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2012, 10-13 June, 2012, Helsinki, Finland. Hasse, N., Satu, K., Ville, T. & Seppo, T. (eds.). Tampere: Tampere University of Technology. Department of Production Engineering, p. 1005-1013 (International Conference on Flexible Automation and Intelligent Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  40. Published

    Rakenteiden mekaniikka

    Salmi, T. & Kuula, K., 2012, Tampere: Pressus Oy. 464 p.

    Research output: Book/ReportBookProfessional

  41. Published

    Numerical modelling of bit-rock interaction in percussive drilling

    Saksala, T., 2010, ECCM 2010, IV European Conference on Computational Mechanics, May 16-21, 2010, Paris, France. p. 1-2 2 p. 2078

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  42. Published

    3D numerical modelling of bit-rock fracture mechanisms in percussive drilling with a multiple-button bit

    Saksala, T., 2013, In : International Journal for Numerical and Analytical Methods in Geomechanics. 37, 3, p. 309-324

    Research output: Contribution to journalArticleScientificpeer-review

  43. Published

    Two-step Exact Solution for Modified Mohr-Coulomb Viscoplastic Consistency Model with Linear Hardening/Softening: A Proof with Maple Software

    Saksala, T., 2012, In : American Journal of Computational and Applied Mathematics. 2, 1, p. 41-45

    Research output: Contribution to journalArticleScientificpeer-review

  44. Published

    Numerical and experimental study of percussive drilling with a triple-button bit on Kuru granite

    Saksala, T., Gomon, D., Hokka, M. & Kuokkala, V-T., 2014, In : International Journal of Impact Engineering. 72, p. 56-66 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  45. Published

    Numerical modeling and experimentation of dynamic indentation with single and triple indenters on Kuru granite

    Saksala, T., Gomon, D., Hokka, M. & Kuokkala, V-T., 2013, Rock Dynamics and Applications - State of the Art, Proceedings of the first international conference on rock dynamics and applications, RocDyn-1, Lausanne, Switzerland, 6-8 June 2013. Zhao, J. & Li, J. (eds.). Boca Raton: CRC Press Taylor & Francis Group : A Belkema Book, p. 415-421 7 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  46. Published

    Combined continuum damage-embedded discontinuity model for explicit dynamic fracture analyses of quasi-brittle materials

    Saksala, T., Brancherie, D., Harari, I. & Ibrahimbegovic, A., 2015, In : International Journal for Numerical Methods in Engineering. 101, 3, p. 230-250 21 p.

    Research output: Contribution to journalArticleScientificpeer-review

  47. Published

    Erratum: 3D numerical modelling of bit-rock fracture mechanisms in percussive drilling with a multiple-button bit (vol 37, pg 309, 2013)

    Saksala, T., 2013, In : International Journal for Numerical and Analytical Methods in Geomechanics. 37, 3, p. 325-330 6 p.

    Research output: Contribution to journalArticleScientific

  48. Published

    Numerical modelling of bit-rock fracture mechanisms in percussive drilling with a continuum approach

    Saksala, T., 2011, In : International Journal for Numerical and Analytical Methods in Geomechanics. 35, 13, p. 1483-1505

    Research output: Contribution to journalArticleScientificpeer-review

  49. Published

    Impact Modeling by Manifold Approach in Explicit Transient Dynamics

    Saksala, T. & Mäkinen, J., 2011, COMPDYN 2011, 3rd International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, 25-28 May 2011, Corfu, Greece. Corfu: COMPDYN, p. 1-13 13 p. (International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering COMPDYN).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  50. Published

    Yksinkertainen J2-plastisuus-vauriomalli metalleille

    Saksala, T., 2012, Proceedings of the 11th Finnish Mechanics Days. XI Suomen Mekaniikkapäivät, Oulun yliopisto 29.-30.11.2012. Hannu, K. & Mikko, M. (eds.). Oulu: Oulun yliopisto, p. 177-182 (Finnish Mechanics Days. Suomen Mekaniikkapäivät).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Previous 1 2 3 4 5 6 7 8 ...25 Next
Download list To download, please limit the number of search results to 1,000 or less.