Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. Published

    Comparison between an aircraft speed brake actuator high order linear model and a semi-empirical non-linear model in real time simulation

    Hietala, J-P., Aaltonen, J., Koskinen, K. T. & Vilenius, M., 2011, AST 2011, 3rd International Workshop on Aircraft System Technologies, March 31 - April 1, 2011, Hamburg, Germany. Hamburg: Hamburg University of Technology, p. 65-71 (International Workshop on Aircraft System Technologies AST; vol. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  2. Published

    Development of process for adaptive lifetime estimation of mechanical assemblies using accelerated testing methods

    Hietala, J-P., Ojala, P., Multanen, P., Miettinen, J. & Saarenrinne, P., 26 Oct 2016, Risk, Reliability and Safety: Innovating Theory and Practice : Proceedings of the 26th European Safety and Reliability Conference, ESREL 2016, Glasgow, Scotland, 25-29 September 2016. Walls, L., Revie, M. & Bedford, T. (eds.). CRC Press; Taylor & Francis, 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  3. Published

    Fatigue Lifetime Estimation of Machine Component Using Accelerated Testing

    Hietala, J-P., Ojala, P., Multanen, P., Miettinen, J. & Saarenrinne, P., 2017, ESREL 2017. CRC Press

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  4. Published

    Effect of start-up schemes and amplitude of tangential motion on friction behavior in fretting point contact

    Hintikka, J., Lehtovaara, A. & Lönnqvist, C., 2011, In : Tribology International. 44, 11, p. 1535-1543

    Research output: Contribution to journalArticleScientificpeer-review

  5. Published

    Fretting fatigue and friction of quenched and tempered steel in dry contact with aluminum bronze

    Hintikka, J., Lehtovaara, A. & Mäntylä, A., 2013, In : Wear. 308, 1-2, p. 155-165 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  6. Published

    Fretting fatigue of quenched and tempered steel in contact with bronze

    Hintikka, J., Lehtovaara, A. & Mäntylä, A., 2012, 15th Nordic Symposium on Tribology, NordTrib 2012, 12-15 June 2012, Trondheim, Norway. Trondheim: NTNU Norwegian University of Science and Technology, p. 1-6 6 p. (Nordic Symposium on Tribology).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  7. Published

    Evolvable micro production systems: specific needs and differences to macro

    Hofmann, A., Bretthauer, G., Siltala, N. & Tuokko, R., 2011, IEEE International Symposium on Assembly and Manufacturing, ISAM 2011, 25-27 May, 2011, Tampere Hall, Tampere, Finland. Piscataway, NJ: IEEE, p. 1-6 6 p. (IEEE International Symposium on Assembly and Manufacturing ISAM).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  8. Published

    Dynamic Fracture and Fragmentation of Heat Shocked Granites

    Hokka, M., Mardoukhi, A. & Kuokkala, V-T., 2017, 14th International conference of Fracture: Proceedings of ICF 14. Rhodes, Greece

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  9. Published

    Digital Image Correlation as a Measurement Tool for Heart Surgery

    Hokka, M., 2017, Proceedings of the Annual Meeting of the International Digital Image Correlation Society, Barcelona.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  10. Published

    Prediction of the Transient Effects in Glassy Polymers

    Holopainen, S., 2012, Proceedings of the 11th Finnish Mechanics Days. XI Suomen Mekaniikkapäivät, Oulun yliopisto 29.-30.11.2012. Hannu, K. & Mikko, M. (eds.). Oulu: Oulun yliopisto, p. 9-14 (Finnish Mechanics Days. Suomen Mekaniikkapäivät).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  11. Published

    Symmetrization of Tensors on General Spaces and Their Applications in Continuum Mechanics

    Holopainen, S., 2009, Proceedings of 7th EUROMECH Solid Mechanics Conference - Lectures and General Sessions. Ambrosio, J. A. C. & Silva, M. P. T. (eds.). APMTAC, p. 63-64 2 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  12. Published

    A model for scheduling of employees using supplier selection

    Holopainen, S., 2014, Engineering optimization IV, Proceedings of the International Conference on Engineering Optimiztion (ENGOPT 2014), Lisbon, Portugal, 8-11 September 2014. Rodrigues, H. C., Herskovits, J., Mota Soares, C. M., Guedes, J. M., Araújo, A. L., Folgado, J. O., Moleiro, F. & Madeira, J. F. A. (eds.). The Netherlands: CRC Press/Balkema, p. 533-538 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  13. Published

    Representations of m-linear functions on tensor spaces: Duals and transpositions with applications in continuum mechanics

    Holopainen, S., 2014, In : Mathematics and Mechanics of Solids. 19, 2, p. 168-192 25 p.

    Research output: Contribution to journalArticleScientificpeer-review

  14. Published

    Modeling of Long-Term Behavior of Glassy Polymers

    Holopainen, S. & Wallin, M., 2013, In : Journal of Engineering Materials and Technology: Transactions of the ASME. 135, 1, 11 p., 011001.

    Research output: Contribution to journalArticleScientificpeer-review

  15. Published

    Parameter sensitivity and thickness design of anisotropic elasto-plastic shell

    Holopainen, S., 2005, Proceedings 6th Congress on Structural and Multidisplinary Optimization, Rio de Janeiro, 30 May-3 June 2005, Brazil. Herskovits, J., Mazorche, S. & Canelas, A. (eds.). ISSMO, International society for structural and multidisciplinary optimization, 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  16. Published

    Modeling of the mechanical behavior of amorphous glassy polymers under variable loadings and comparison with state-of-the-art model predictions

    Holopainen, S., 2013, In : Mechanics of Materials. 66, p. 35-58 24 p.

    Research output: Contribution to journalArticleScientificpeer-review

  17. Published

    Influence of damage on inhomogeneous deformation behavior of amorphous glassy polymers. Modeling and algorithmic implementation in a finite element setting

    Holopainen, S., 2014, In : Engineering Fracture Mechanics. 114, p. 28-50 23 p.

    Research output: Contribution to journalArticleScientificpeer-review

  18. Published

    Prediction of long-term mechanical behavior of glassy polymers

    Holopainen, S. & Wallin, M., 2010, Proceedings of the 23rd Nordic Seminar on Computational Mechanics Stockholm, 21-22 October, 2010. Eriksson, A. & Tibert, G. (eds.). 752: KTH, p. 134-137 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  19. Published

    Computational modelling of high-cycle fatigue using a continuum based model

    Holopainen, S., Kouhia, R., Könnö, J. & Saksala, T., 2015, Proceedings of the NSCM28: 28th Nordic Seminar on Computational Mechanics, October 22 – 23, 2015, Tallinn, Estonia. p. 71-74 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  20. Published

    Transpositions and duals high-order tensors. On theory and applications in mechanics

    Holopainen, S., 4 Jun 2015, Proceedings of the XII Finnish Mechanics Days: Suomen XII mekaniikkapäivien esitelmät. Kouhia, R. (ed.). Rakenteiden Mekaniikan Seura ry, p. 188-193 6 p. (Journal of Structural Mechanics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  21. Published

    Evolution equations based approach for modeling of fatigue in amorphous glassy polymers. On the investigation of fatigue damage development in polycarbonate

    Holopainen, S., 2016, Proc. of VII European Congress on Computational Methods in Applied Sciences and Engineering , ECCOMAS Congress 2016. : M. Papadrakakis, V. Papadopoulos, G. Stefanou, V. Plevris (eds.) . Crete Island, Greece, 5 – 10 June 2016. Papadrakakis, M., Papadopoulos, V., Stefanou, G. & Plevris, V. (eds.). p. 6675-6687 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  22. Published

    Big data tulee – nykytila ja tulevaisuuden mahdollisuudet

    Holopainen, S. (Guest ed.) & Kuusi, O. (Guest ed.), Jun 2016, In : Futura. 2, 113 p.

    Research output: Contribution to journalSpecial issueScientificpeer-review

  23. Published

    Continuum approach for modelling transversely isotropic high-cycle fatigue

    Holopainen, S., Kouhia, R. & Saksala, T., 1 Nov 2016, In : EUROPEAN JOURNAL OF MECHANICS A: SOLIDS. 60, p. 183-195

    Research output: Contribution to journalArticleScientificpeer-review

  24. Published

    Computational modelling of transversely isotropic high-cycle fatigue using a continuum based model

    Holopainen, S., Kouhia, R., Könnö, J. & Saksala, T., 2016, 21st European Conference on Fracture, ECF21, 20-24 June 2016, Catania, Italy. p. 2718–2725 8 p. (Procedia Structural Integrity; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  25. Published

    Continuum approach for modeling fatigue in amorphous glassy polymers. Applications to the investigation of damage-ratcheting interaction in polycarbonate

    Holopainen, S., Barriere, T., Cheng, G. & Kouhia, R., Apr 2017, In : International Journal of Plasticity. 91, p. 109-133 24 p.

    Research output: Contribution to journalArticleScientificpeer-review

  26. Published

    Method for analysing planar machine tool measurements

    Hölsä, J., 1999, Tampere: Tampere University of Technology. (Tampereen teknillinen korkeakoulu. Julkaisuja; vol. 280)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  27. Published

    Mems Sensor Module for Hydraulic Boom State Feeedback Control

    Honkakorpi, J., Vihonen, J. & Mattila, J., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Sairala, H. & Koskinen, K. T. (eds.). Tampere: Scandinavian International Conference on Fluid Power, p. 393-404 (Scandinavian International Conference on Fluid Power SICFP).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  28. Published

    Application of mems sensor fusion in hydraulic boom control

    Honkakorpi, J. & Mattila, J., 2010, Proceedings of the Post-Graduate Workshop on Intelligent Machines and Transport Systems, May 3-7, 2010, CERN, Switzerland. Karvinen, T. & Keskinen, E. (eds.). p. 1-11 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  29. Published

    MEMS-based State Feedback Control of Multi-Body Hydraulic Manipulator

    Honkakorpi, J., Vihonen, J. & Mattila, J., 2013, 2013 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), November 3-7, 2013, Tokyo, Japan. Institute of Electrical and Electronics Engineers IEEE, p. 4419-4425 7 p. (IEEE/RSJ International Conference on Intelligent Robots and Systems).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  30. Published

    Sensor module for hydraulic boom state feedback control

    Honkakorpi, J., Vihonen, J. & Mattila, J., 2012, In : International Journal of Fluid Power. 13, 3, p. 15-23

    Research output: Contribution to journalArticleScientificpeer-review

  31. Published

    MEMS-based motion state estimation and control of hydraulic manipulators

    Honkakorpi, J., 27 Jun 2014, Tampere: Tampere University of Technology. 91 p. (Tampere University of Techology. Publication; vol. 1219)

    Research output: Book/ReportDoctoral thesisMonograph

  32. Published

    Mems sensor network based anti-sway control system for articulated hydraulic crane

    Honkakorpi, J., Vihonen, J. & Mattila, J., 2013, Proceedings of ASME/BATH 2013 Symposium on Fluid Power and Motion Control, FPMC2013, October 6-9, 2013, Sarasota, Florida. p. 1-9 9 p. (Symposium on Fluid Power and Motion Control).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  33. Published

    Lagrangian tracking of bubbles interacting with pin-fins in a microchannel

    Honkanen, M., Elcock, D., Kuo, C-J., Peles, Y. & Amitay, M., 2011, In : Experiments in Fluids. 50, 6, p. 1527-1538

    Research output: Contribution to journalArticleScientificpeer-review

  34. Published

    Comportamiento Dinámico en Tracción a Alta Temperatura De Titanio Ensayado Por Dos Métodos Distintos

    Hueto, F., Sancho, R., Hokka, M. & Galvez, F., 2017, Grupo Español de Fractura.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  35. Published

    Polttoainekulut kuriin

    Huhtala, K., 2013, In : Fluid Finland. 12, 2, p. 14-16 3 p.

    Research output: Contribution to journalArticleProfessional

  36. Published

    Pääkirjoitus: Tehokkuutta sitähän se kaikki on

    Huhtala, K., 2013, In : Fluid Finland. 12, 1, p. 5-5 1 p.

    Research output: Contribution to journalArticleProfessional

  37. Published

    Reitinvalintaa rastilta seuraavalle

    Huhtala, K., 2010, In : Fluid Finland. 3-4, p. 7-7

    Research output: Contribution to journalArticleScientific

  38. Published

    Koulutuksesta ja tutkimuksesta

    Huhtala, K., 2010, In : Fluid Finland. 9, 3-4, p. 6-6

    Research output: Contribution to journalArticleScientific

  39. Published

    Hydraulijärjestelmien suunnitteluperusteet

    Huhtala, K. & Rinkinen, J., 2014, Koneenosien suunnittelu. Björk, T., Hautala, P., Huhtala, K., Kivioja, S., Kleimola, M., Lavi, M., Martikka, H., Miettinen, J., Ranta, A., Rinkinen, J. & Salonen, P. (eds.). Helsinki: Sanoma Pro Oy, p. 436-463 28 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  40. Published

    Research platforms for future activities

    Huhtala, K., 2010, Proceedings of the 3rd GIM Scientific Workshop, February 17-18, 2010, Aalto University School of Science and Technology. Halme, A. & Pirttioja, T. (eds.). p. 1-16 16 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  41. Published

    IHA Department of Intelligent Hydraulics and Automation

    Huhtala, K. & Aunola, V., 2011, In : Fluid Finland. 10, 1, p. 10-11

    Research output: Contribution to journalArticleProfessional

  42. Control architecture of GIM machine

    Huhtala, K., Uusisalo, J., Vuohijoki, A. & Ahopelto, M., 2011, GIM - Generic Intelligent Machines, 1st GIM Scientific Workshop at Helsinki University of Technology, 14.-15.8.2008. Espoo: Helsinki University of Technology, p. 71-79

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  43. Published

    New energy efficient solutions to mobile machines

    Huhtala, K., Ahopelto, M., Heikkilä, M., Backas, J., Tammisto, J., Huova, M. & Linjama, M., 2013, The 8th International Conference on Fluid Power Transmission and Control, ICFP 2013, April 9-11, 2013, Zhejiang University, Hangzhou, China. Yongxiang, L., Qingfeng, W., Bingfeng, J. & Jun, Z. (eds.). p. 38-52 15 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  44. Published

    An approach to model relations between product variety and manufacturing process variety

    Huhtala, P., Pulkkinen, A. & Leskinen, A., 2010, NordDesign 2010 Conference, 25-27 August, 2010, Göteborg, Sweden. Dagman, A. & Söderberg, R. (eds.). p. 129-138

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  45. A refining surface for a refiner for defibering material containing lignocellulose

    Huhtanen, J-P. & Karvinen, R., 2011, Patent No. Pat. CA 2490717, Priority No. (30) 2002/07/02(30) FI20021310

    Research output: PatentScientific

  46. Published

    Energy reduction in chip refining by optimization of operating parameters and segment design

    Huhtanen, J-P., Ruola, V. & Vuorio, P., 2010, 7th International Seminar on Fundamental Mechanical Pulp Research (IFMPRS 2010), June 21-23, 2010, Nanjing, China. p. 125-129

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  47. Published

    Flow-limited path-following control of a double Ackermann steered hydraulic mobile manipulator

    Hulttinen, L. & Mattila, J., 2020, 2020 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM). IEEE, p. 625-630 6 p. ( IEEE/ASME International Conference on Advanced Intelligent Mechatronics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  48. Published

    Simulations with fault-tolerant controller software of a digital valve

    Huova, M., Ketonen, M., Alexeev, P., Boström, P., Linjama, M., Walden, M. & Sere, K., 2012, Proceedings of the fifth workshop on digital fluid power, October 24-25, 2012, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). Tampere: Tampere University of Technology. Department of Intelligent Hydraulics and Automation, p. 223-242 (Digital fluid power).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  49. Published

    Energy efficient control of multiactuator digital hydraulic mobile machine

    Huova, M., Karvonen, M., Ahola, V., Linjama, M. & Vilenius, M., 2010, 7th International Fluid Power Conference (7th IFK), 22-24 March 2010, Aachen, Germany. p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  50. Published

    Energy Efficiency of Digital Hydraulic Valve Control Systems

    Huova, M., Linjama, M. & Huhtala, K., 2013, SAE 2013 Commercial Vehicle Engineering Congress (COMVEC), October 1-3, 2013, Rosemont, Illinois, USA. 13 p. (SAE Technical Papers).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Previous 12 3 4 5 6 7 8 9 ...26 Next
Download list To download, please limit the number of search results to 1,000 or less.