Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. Published

    Valve parameter study in case of digital pump

    Jaurola, M., 2010, Proceedings of the 3rd GIM Scientific Workshop, February 17-18, 2010, Aalto University School of Science and Technology. Halme, A. & Pirttioja, T. (eds.). Espoo, p. 1-13 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  2. Published

    Analysis of single flank test results providing flank topography errors of spiral bevel gears

    Jerabek, F., 2000, Tampere: Tampere University of Technology. (Tampereen teknillinen korkeakoulu. Julkaisuja; vol. 314)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  3. Published

    On the effect of damping on stability of non-conservative systems

    Jeronen, J. & Kouhia, R., 2015, Proceedings of the XII Finnish Mechanics Days: Suomen XII mekaniikkapäivien esitelmät. Kouhia, R., Mäkinen, J., Pajunen, S. & Saksala, T. (eds.). Rakenteiden Mekaniikan Seura ry, p. 77 82 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  4. Published

    On the integration of an evolution equation based high-cycle fatigue model

    Jeronen, J., Kouhia, R., Lahtinen, J. & Orelma, H., 2019, Proceedings of the 32nd Nordic Seminar on Computational Mechanics. Niemi, A. H. & Koivurova, H. (eds.). University of Oulu, p. 95-97 3 p. (Raportti / Oulun yliopisto, konetekniikka; no. 9).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  5. Published

    Multi-agent control of reconfigurable pallet transport systems

    Jokinen, J., 2010, Tampere: Tampere University of Technology. (Tampereen teknillinen yliopisto. Julkaisu; vol. 869)

    Research output: Book/ReportDoctoral thesisMonograph

  6. Published

    Inverse Methods for Continuous Balancing of Flexible Rolls

    Jokinen, K., 2010, Tampere: Tampere University of Technology. 107 p. (Tampereen teknillinen yliopisto. Julkaisu; vol. 944)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  7. Published

    Support-condition analyses of rotating beams under distributed imbalance loading

    Jokinen, K., Keskinen, E., Jorkama, M. & Seemann, W., 2011, ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE2011, November 11-17, 2011, Denver, Colorado, USA. New York, NY: ASME, p. 325-334 (ASME International Mechanical Engineering Congress and Exposition IMECE2011).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  8. Published

    A distributed balancing method for elastic rolls

    Jokinen, K. & Keskinen, E., 2010, Proceedings ot The Post-Graduate Workshop on Intelligent Machines and Transport Systems, May 3-7, 2010, Cern, Switzerland. Karvinen, T. & Keskinen, E. (eds.). p. 52-65

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  9. Published

    Continuous Models of Elastic Roll on Various Supports

    Jokinen, K. & Keskinen, E., 2011, 13th World Congress in Mechanism and Machine Science, Guanajuato, Mexico, 19-25 June, 2011. Guanajuato: Universidad de Guanajuato, p. 1-9 9 p. IMD-123. (World Congress in Mechanism and Machine Science).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  10. Published

    Condition monitoring for predictive maintenance in the pulp & paper industry: two implementions

    Jokinen, J., Postelnicu, C., Zhang, B., Camp, R., Suhonen, M., Karhumäki, O. & Martinez Lastra, J. L., 2012, Proceedings of 2012 IEEE International Conference on Systems, Man, and Cybernetics, SMC 2012, 14-17 October, 2012, COEX, Seoul, Korea. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, p. 1633-1638 (IEEE International Conference on Systems, Man and Cybernetics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  11. Published

    Industrial monitoring and control approach for dynamic and distributed intelligent systems

    Jokinen, J. & Martinez Lastra, J. L., 7 Nov 2016, 2016 IEEE 21st International Conference on Emerging Technologies and Factory Automation (ETFA). IEEE, (IEEE Emerging Technologies and Factory Automation).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  12. Published

    Implementation of nonintrusive monitoring and fault diagnosis in industrial robot system

    Jokinen, J. & Martinez Lastra, J. L., 2016, Proceedings of IEEE 14th International Conference on Industrial Informatics, INDIN 2016. IEEE, p. 457-462 (IEEE International Conference on Industrial Informatics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  13. Published

    Integrating Smart City Services using Arrowhead Framework

    Jokinen, J. & Latvala, T., 2016, Proceedings of IEEE 42nd Annual Conference on IEEE Industrial Electronics Society. IEEE

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  14. Published

    Condition monitoring for distributed systems with reconfigurable user interfaces and data permissions

    Jokinen, J., Bose Ambat, M. & Martinez Lastra, J. L., 2016, Proceedings of IEEE 42nd Annual Conference on IEEE Industrial Electronics Society. IEEE

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  15. Published

    Engineering Change Management Data Analysis from the Perspective of Information Quality

    Jokinen, L., Vainio, V. & Pulkkinen, A., 2017, In : Procedia Manufacturing. 11, p. 1626-1633 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  16. E-pub ahead of print

    A concept for defining the mixed-mode behaviour of tough epoxy film adhesives by single specimen design

    Jokinen, J., Orell, O., Wallin, M. & Kanerva, M., 2020, In : Journal of Adhesion Science and Technology. 18 p.

    Research output: Contribution to journalArticleScientificpeer-review

  17. Published

    Sedimentation stability and rheological properties of ionic liquid-based bidisperse magnetorheological fluids

    Jönkkäri, I., Isakov, M. & Syrjälä, S., 2014, In : Journal of Intelligent Material Systems and Structures. 26, 16, p. 2256-2265 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  18. Published

    Design of a portable motion platform using pneumatic muscle actuators

    Jouppila, V., Itäsalo, A-V., Kuosa, J. & Ellman, A., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Sairala, H. & Koskinen, K. T. (eds.). Tampere: Scandinavian International Conference on Fluid Power, p. 1-15 15 p. (Scandinavian International Conference on Fluid Power SICFP).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  19. Published

    Sliding mode control of a pneumatic muscle actuator system with a PWM strategy

    Jouppila, V. T., Gadsden, A. S., Bone, G. M., Ellman, A. U. & Habibi, S. R., 2014, In : International Journal of Fluid Power. 15, 1, p. 19-31 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  20. Published

    Model-based development in the domain of mobile machines

    Jouppila, V., Kaapu, T., Sjöstedt, C-J., Ellman, A. & Chen, D-J., 2014, Digital proceedings of the tenth International Symposium on Tools and Methods of Competitive Engineering - TMCE 2014, May 19-23, Budapest, Hungary. Horvath, I. & Rusak, Z. (eds.). Delft: Delft University of Technology, p. 759-772 14 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  21. Published

    Position control fo PWM-actuated pneumatic musckle actuator system

    Jouppila, V. & Ellman, A., 2011, ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE2011, November 11-17, 2011, Denver, Colorado, USA. New York, NY: ASME, (ASME International Mechanical Engineering Congress and Exposition IMECE2011).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  22. Published

    Modeling and control of a pneumatic muscle actuator

    Jouppila, V., 4 Apr 2014, Tampere: Tampere University of Technology. 95 p. (Tampere University of Technology. Publication; vol. 1199)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  23. Published

    Experimental Comparisons of Sliding Mode Controlled Pneumatic Muscle and Cylinder Actuators

    Jouppila, V., Gadsden, A. S. & Ellman, A., 2014, In : Journal of Dynamic Systems, Measurement and Control: Transactions of the ASME. 136, 4, 10 p., 044503.

    Research output: Contribution to journalArticleScientificpeer-review

  24. Published

    Modeling and identification of a pneumatic muscle actuator system controlled by on/off solenoid valve

    Jouppila, V., Gadsden, A. & Ellman, A., 2010, Proceedings of the 7th International Fluid Power Conference IFK, Aachen, Germany, 22 - 24 March, 2010. p. 1-34 34 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  25. Published

    Kitkaväsymisen tuomat haasteet

    Juoksukangas, J. & Lehtovaara, A., 2012, In : Materia. 70, 5, p. 56-57

    Research output: Contribution to journalArticleProfessional

  26. Published

    The effect of contact edge geometry on fretting fatigue behavior in complete contacts

    Juoksukangas, J., Lehtovaara, A. & Mäntylä, A., 2013, In : Wear. 308, 1-2, p. 206-212 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  27. Published

    Development of a complete contact fretting test device

    Juoksukangas, J., Lehtovaara, A. & Mäntylä, A., 2013, In : Proceedings of the institution of Mechanical Engineers Part J: Journal of Engineering Tribology. 227, 6, p. 570-578

    Research output: Contribution to journalArticleScientificpeer-review

  28. Published

    The effect of contact edge geometry on fretting fatigue behavior in complete contacts

    Juoksukangas, J., Lehtovaara, A. & Mäntylä, A., 2012, 15th Nordic Symposium on Tribology, NordTrib 2012, 12-15 June 2012, Trondheim Norway. Trondheim: NTNU Norwegian University of Science and Technology, p. 1-6 6 p. (Nordic Symposium on Tribology).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  29. Published

    Response to discussion with DA Hills et al., concerning the article "Development of a complete contact fretting test device" by J. Juoksukangas et al.

    Juoksukangas, J., Lehtovaara, A. & Mäntylä, A., 2014, In : Proceedings of the institution of Mechanical Engineers Part J: Journal of Engineering Tribology. 228, 1, p. 127-128 2 p.

    Research output: Contribution to journalArticleScientific

  30. Published

    Development of a test rig for reciprocating seals in heavy load conditions

    Juoksukangas, J., Lehtovaara, A., Miettinen, J., Tolvanen, P., Järvelä, P. & Niemi, A-M., 2010, 14th Nordic Symposium on Tribology, Nordtrib 2010, Storforsen, Sweden, Luleå University of Technology. p. 1-8 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  31. Published

    Modelling and Experimental Analysis of Fretting Fatigue in Complete and Bolted Contacts

    Juoksukangas, J., 24 May 2017, Tampere University of Technology. 58 p. (Tampere University of Technology. Publication; vol. 1472)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  32. Published

    Koneisiin lisää kestoikää kitkaväsymisen paremmalla hallinnalla

    Juoksukangas, J., Mar 2018, In : Promaint. 1, p. 24-26 3 p.

    Research output: Contribution to journalArticleProfessional

  33. Published

    Characterization of cracks formed in large flat-on-flat fretting contact

    Juoksukangas, J., Nurmi, V., Hintikka, J., Vippola, M., Lehtovaara, A., Mäntylä, A., Vaara, J. & Frondelius, T., Jul 2019, In : International Journal of Fatigue. 124, p. 361-370 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  34. Published

    Champion-työkalut: Fasilitoijan ohjeet. Mestariluokan työkalut hankkeiden valmisteluun ja toteuttamiseen

    Juuti, T., Kopra, M-J., Halonen, N. & Tapaninaho, M., 2014, Tampere: Tampereen teknillinen yliopisto. Kone- ja tuotantotekniikan laitos. 80 p.

    Research output: Book/ReportBookProfessional

  35. Published

    Design management in product development organisation - the elaboration of comprehensive design management model

    Juuti, T. & Lehtonen, T., 2010, NordDesign 2010 Conference, 25-27 August, 2010, Göteborg, Sweden. Dagman, A. & Söderberg, R. (eds.). p. 65-74

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  36. Published

    Design education with simulation games

    Juuti, T., Hansen, P. K. & Lehtonen, T., 2008, Proceedings of the 10th Engineering and product design Eduacation International Conference, 4-5 September, 2008, Universitat Politecnica de Catalunya, Barcelona, Spain. Clarke, A., Evatt, M., Hogarth, P., Lloveras, J. & Pons, L. (eds.). p. 811-816

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  37. Published

    Product development education - Conceptual modelling, knowledge integration and metacognition

    Juuti, T., Lehtonen, T. & Rättyä, K., 2012, 4th International Conference on Engineering and Product Design Education: Design Education for Future Wellbeing, EPDE 2012, 6-7 September, Antwerp; Belgium. p. 83-88 6 p. (International Conference on Engineering and Product Design Education).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  38. Published

    Design management of product with variability and commonality

    Juuti, T., 2008, Tampere: Tampere University of Technology. 153 p. (Tampereen teknillinen yliopisto. Julkaisu; vol. 789)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  39. Published

    Design reasoning patterns in NPD education design

    Juuti, T., Lehtonen, T., Rättyä, K., Halonen, N., Vanhatalo, M. & Kujansuu, P., 2014, Proceedings of 16th International Conference on Engineering and Product Design Education, University of Twente, Enschede, The Netherlands 4th-5th September 2014. Bohemia, E., Eger, A., Eggink, W., Kovacevic, A., Parkinson, B. & Wits, W. (eds.). The Design Society, p. 682-687 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  40. Published

    Framework for managing activity-based optimisation of order-delivery process

    Juuti, J., 29 Apr 2005, Tampere: Tampere University of Technology. 238 p. (Tampere University of Technology. Publication; vol. 529)

    Research output: Book/ReportDoctoral thesisMonograph

  41. Published

    Champion tools: The facilitator's handbook

    Juuti, T., Kopra, M-J., Lehtonen, T., Tuokko, R. & Lanz, M., 2015, Tampere: Tampere University of Technology. Department of Mechanical Engineering and Industrial Systems. 68 p.

    Research output: Book/ReportBookProfessional

  42. Published

    NPD Risk Management with Experiential Learning Oriented Method

    Juuti, T. & Kopra, M-J., 12 Aug 2016, NordDesign 2016 Proceedings Part2. Trondheim, p. 390-399

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  43. Published

    How to benefit from learning logs in engineering education?

    Juuti, T., Kopra, M. J., Rättyä, K. & Lehtonen, T., 2016, 44th Annual Conference of the European Society for Engineering Education - Engineering Education on Top of the World: Industry-University Cooperation, SEFI 2016. European Society for Engineering Education SEFI

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  44. Published

    Learning logs in product development education

    Juuti, T., Rättyä, K. & Lehtonen, T., 2016, Proceedings of the 18th International Conference on Engineering and Product Design Education: Design Education: Collaboration and Cross-Disciplinarity, E and PDE 2016. Institution of Engineering Designers, The Design Society, p. 296-301 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  45. Published

    A Semi-Fidelity Training Simulator: Promising Opportunities for Student-Centered Learning

    Kaapu, T., Tiainen, T. & Ellman, A., 2014, Proceedings of the 22nd European Conference on Information Systems, ECIS 2014, June 9-11, 2014,Tel Aviv. 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  46. Published

    User Interpretations of Virtual Prototypes: Physical Place Matters

    Kaapu, T., Tiainen, T. & Ellman, A., 2014, In : Scandinavian Journal of Information Systems. 25, 2, p. 1-22 22 p., 4.

    Research output: Contribution to journalArticleScientificpeer-review

  47. Published

    Studying Users and Virtual Prototyping in Machine Design

    Kaapu, T., Ellman, A. & Tiainen, T., 2011, Proceedings of IRIS 2011 Conference, 16.-19.8.2011, Turku, Finland. TUCS Lecture Notes. Leino, T. (ed.). Turku: TURKU CENTRE FOR COMPUTER SCIENCE, p. 358-369 (IRIS Conference; vol. 15).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  48. Published

    Phenomenography: alternative research approach for studying the diversity of users' understandings

    Kaapu, T. & Tiainen, T., 2012, Proceedings of the European Conference for Information Systems ECIS 2012, June 10-13, 2012 ESADE, Barcelona, Spain. Barcelona, SPain, Paper 29. (European Conference on Information Systems).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  49. Published

    UV-Blocking Synthetic Biopolymer from Biomass-Based Bifuran Diester and Ethylene Glycol

    Kainulainen, T. P., Sirviö, J. A., Sethi, J., Hukka, T. I. & Heiskanen, J. P., 21 Feb 2018, In : Macromolecules. 51, 5, p. 1822-1829 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  50. Published

    Dynamic Modeling and Simulation of a Cylindrical Grinder in Presence of Non-linear Friction Effect

    Kalbasi Shirvani, H., Järvenpää, V-M. & Yuan, L., 2013, Proceedings in Research Conference in Technical Disciplines, RCITD 2013, 18.-22. November 2013, Slovak Republic. Mokrys, M., Badura, S. & Lieskovsky, A. (eds.). Zilina: EDIS, p. 47-52 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Previous 1...4 5 6 7 8 9 10 11 ...25 Next
Download list To download, please limit the number of search results to 1,000 or less.