Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. Published

    Bounded-Velocity Motion Control of Four Wheel Steered Mobile Robots

    Oftadeh, R., Aref, M. M., Ghabcheloo, R. & Mattila, J., 2013, 2013 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM 2013, Mechatronics for Human Wellbeing, July 9-12, 2013, Wollongong, Australia. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, p. 255-260 6 p. (IEEE/ASME International Conference on Advanced Intelligent Mechatronics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  2. Published

    Developing competitive and sustainable performance metrics for an intelligent manufacturing environment

    Nylund, H., Lanz, M., Ranta, A., Ikkala, K. & Tuokko, R., 2010, Proceedings of International Scientific Conference on Management of Technology - Step to Sustainable Production, MOTSP 2010, 2-4 June, 2010, Rovinj, Croatia. Baric, G. & Dukic, G. (eds.). Zagreb: Faculty of Mechanical Engineering and Naval Architecture, p. 8 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  3. Published

    Supporting manufacturing companies on utilizing environmental performance metrics

    Nylund, H., Tapaninaho, M., Kirman, B., Koho, M. & Torvinen, S., 2012, The 10th Global Conference on Sustainable Manufacturing, GCSM 2012, 31 October - 2 November, 2012, Istanbul, Turkey. Seliger, G. & Kylyc, S. E. (eds.). GCSM, p. 582-587 (Global Conference on Sustainable Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  4. Published

    Impacts of Product Lifecycle and Production System Design on Competitive and Sustainable Production

    Nylund, H., Tapaninaho, M., Torvinen, S. & Andersson, P. H., 2013, 23rd International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 13, The challenge of sustaining global competitive manufacturing systems, 26-28 June 2013 Porto Portugal, Advances in Sustainable and Competitive Manufacturing Systems. Azevedo, A. (ed.). Switzerland: Springer International Publishing, p. 3-13 11 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  5. Published

    A holistic view on design and development of manufacturing systems

    Nylund, H. & Andersson, P. H., 2012, Proceedings of the 45th CIRP CMC Conference on Manufacturing Systems Technology. Chryssolouris, G. & Mourtzis, D. (eds.). p. 438-443 (CIRP Conference on Manufacturing Systems).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  6. Published

    CSM-Hotel - A new manufacturing concept for small and medium enterprises

    Nylund, H., Toivonen, V., Salminen, K. & Tuokko, R., 2011, 44th CIRP Conference on Manufacturing systems, May 31-June 3, 2011, Madison, WI, USA. Madison, WI: The International Academy for Production Engineering CIRP, p. 1-7 7 p. (CIRP Conference on Manufacturing Systems).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  7. Published

    Framework for distributed manufacturing systems

    Nylund, H., Salminen, K. & Andersson, P. H., 2011, Enabling Manufacturing Competitiveness and Economic Sustainability, Proceedings of the 4th International Conference on Changeable, Agile, Reconfigurable and Virtual production CARV2011, Montreal, Canada, 2-5 October 2011. ElMaraghy, H. (ed.). Berlin: Springer, p. 172-177 (International Conference on Changeable, Agile, Reconfigurable and Virtual production CARV).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  8. Published

    Digital manufacturing supporting autonomy and collaboration of manufacturing systems

    Nylund, H. & Andersson, P. H., 2012, Manufacturing systems. Faieza, A. A. (ed.). Rijeka, Croatia: InTech, p. 261-284

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  9. Published

    Simulation of service-oriented and distributed manufacturing systems

    Nylund, H. & Andersson, P. H., 2010, In : Robotics and Computer-Integrated Manufacturing. 26, 6, p. 622-628

    Research output: Contribution to journalArticleScientificpeer-review

  10. Published

    Viewpoints on digital, Virtual, and real aspects of manufacturing systems

    Nylund, H. & Andersson, P. H., 2011, Proceedings of the 7th International Conference on Digital Enterprise Technology, DET 2011, 28-30 September, 2011, Athens, Greece. Chryssolouris, G. & Mourtzis, D. (eds.). Athens: University of Patras, Laboratory for Manufacturing Systems and Automation, p. 504-511 (International Conference on Digital Enterprise Technology DET).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  11. Published

    A Holistic View on Design and Development of Manufacturing Systems

    Nylund, H. & Andersson, P. H., 2012, In : Procedia CIRP. 3, p. 388-393

    Research output: Contribution to journalArticleScientificpeer-review

  12. Published

    A holistic view on modelling and simulation in the context of an intelligent manufacturing environment

    Nylund, H., Lanz, M., Tuokko, R. & Andersson, P. H., 2011, 21st International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2011, 26-29 June, 2011, Taichung, Taiwan. Taichung: FAIM 2011, p. 801-808 (International Conference on Flexible Automation and Intelligent Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  13. Published

    Considering aspects of lean, agility, and sustainability in digital manufacturing systems

    Nylund, H., Kirman, B., Koho, M., Tapaninaho, M. & Torvinen, S., 2012, In : International Journal of Advanced Manufacturing Systems. 14, 2, p. 9-16

    Research output: Contribution to journalArticleScientificpeer-review

  14. Published

    Framework for extended digital manufacturing systems

    Nylund, H. & Andersson, P. H., 2011, In : International Journal of Computer Integrated Manufacturing. 24, 5, p. 446-456

    Research output: Contribution to journalArticleScientificpeer-review

  15. Published

    Considering product related aspects on design and development of production systems

    Nylund, H., Järvenpää, E. & Andersson, P. H., 2013, Proceedings of the PDM2013 conference, The 1st PDM Forum for Finland-Russia Collaboration, 24.-25.4.2013, Lappeenranta. Huhtala, M. & Eskelinen, H. (eds.). Lappeenranta: Lappeenranta University of Technology, p. 23-28 6 p. (LUT Scientific and Expertise Publication. Tutkimusraportit; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  16. Published

    Digital manufacturing supporting competitive and sustainable collaboration for networked production

    Nylund, H. & Andersson, P. H., 2010, Proceedings of the 5th International Conference on Advances in Production Engineering, APE'2010, Warsaw University of Technology, Warsaw, Poland. p. 543-552

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  17. Published

    Digital manufacturing supporting integrated improvement of products and production systems

    Nylund, H. & Andersson, P. H., 2010, Proceedings of 17th CIRP International Conference on Life Cycle Engineering, LCE 2010, 19-21 May, 2010, Hefei, China. China: Hefei University of Technology, p. 156-161

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  18. Published

    Framework and toolset for developing and realizing sustainable production systems

    Nylund, H., Koho, M. & Torvinen, S., 2010, Proceedings of the 20th International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2010, July 12-14, 2010, California State University East Bay, USA. p. 294-301

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  19. Published

    Considering aspects of lean, agility, and sustainability in digital manufacturing systems

    Nylund, H., Kirman, B., Koho, M., Tapaninaho, M. & Torvinen, S., 2011, Proceedings of the International Conference on Agile Manufacturing systems, ICAM 2011, Systems approach for enhancing agility of organizations and processes, 18-20 December, 2011, Dayalbagh Educational Institute, Agra, India. Hans Raj, K., Verma, A. K., Dwivedi, S. N., Patvardhan, C., Mishra, D. S. & Sharma, R. S. (eds.). Agra: ICAM 2011, p. 580-586 (International Conference on Agile Manufacturing systems ICAM).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  20. Published

    Proceedings of the 22nd International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2012, 10-13 June, 2012, Helsinki, Finland

    Nylund, H. (ed.), Kantti, S. (ed.), Toivonen, V. (ed.) & Torvinen, S. (ed.), 2012, Tampere: Tampere University of Technology. Department of Production Engineering.

    Research output: Book/ReportAnthologyScientificpeer-review

  21. Published

    Semantic Top-Down Modeling of Mechatronics Systems for Sustainable Product Data and Lifecycle Management

    Nykänen, O., Koskinen, K. T., Ranta, P., Salonen, J., Rokala, M., Helminen, M., Nurmi, J., Sairiala, H., Alarotu, V., Aaltonen, J. & Pohjolainen, S., 2012, The 13th Mechatronics Forum International Conference. Proceedings Vol. 3/3. September 17-19 2012, Linz, Austria.. Scheidl, R. & Jacoby, B. (eds.). Linz, Austria: Austrian Center of Competence in Mechatronics (ACCM), p. 792-799 (Mechatronics Forum International Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  22. Published

    Virtuaalinen konelaboratorio ja semanttinen mallinnus konejärjestelmän suunnittelun tukena, Loppuraportti, Semogen II -hanke

    Nykänen, O., Koskinen, K. T., Ranta, P., Salonen, J., Aaltonen, J., Nurmi, J., Helminen, M., Alarotu, V., Salomaa, T. & Pohjolainen, S., 2013, Tampere: Tampereen teknillinen yliopisto, Smart Simulators -tutkimusryhmä. 50 p.

    Research output: Book/ReportCommissioned reportProfessional

  23. Published

    What do information reuse and automated processing require in engineering design? Semantic process

    Nykänen, O., Salonen, J., Markkula, M., Ranta, P., Rokala, M., Helminen, M., Alarotu, V., Nurmi, J., Palonen, T., Koskinen, K. T. & Pohjolainen, S., 2011, In : Journal of Industrial Engineering and Management. 4, 4, 329.

    Research output: Contribution to journalArticleScientificpeer-review

  24. Published

    Micro-electromechanical System Sensors in Unscented Kalman Filter-based Condition Monitoring of Hydraulic Systems

    Nurmi, J., Honkakorpi, J., Vihonen, J. & Mattila, J., 2013, 2013 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, July 9-12, 2013, Wollongong, Australia, AIM 2013 Conference Digest, Mechatronics for Human Wellbeing. IEEE; ASME, p. 354-361 (IEEE/ASME International Conference on Advanced Intelligent Mechatronics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  25. Published

    Detection and isolation of faults in mobile hydraulic valves based on a reduced-order model and adaptive thresholds

    Nurmi, J. & Mattila, J., 2013, Proceedings of ASME/BATH 2013 Symposium on Fluid Power and Motion Control, FPMC2013, October 6-9, 2013, Sarasota, Florida. Sarasota, Florida, USA: ASME, p. 1-10 10 p. (Symposium on Fluid Power and Motion Control).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  26. Published

    Applications and business models for micro and desktop production systems

    Nurmi, A., Heikkilä, R. & Tuokko, R., 2012, Proceedings of the 8th International Workshop on Microfactories, IWMF 2012, 18-20 June, 2012, Tampere Hall, Tampere, Finland. Reijo, T., Minna, L. & Pasi, L. (eds.). Tampere: Tampere University of Technology, p. 1-10 10 p. (International Workshop on MicroFactories).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  27. Published

    Detection and isolation of leakage and valve faults in hydraulic systems in varying loading conditions

    Nurmi, J., 2011, Proceedings of the 5th GIM Scientific Workshop at Aalto University School of Electrical Engineering 29.-30.11.2011. Espoo: Aalto University, p. 80-88 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  28. Published

    Detection and isolation of leakage and valve faults in hydraulic systems in varying loading conditions, Part 1: Global sensitivity analysis

    Nurmi, J. & Mattila, J., 2011, In : International Journal of Fluid Power. 12, 3, p. 41-51

    Research output: Contribution to journalArticleScientificpeer-review

  29. Published

    A reduced-order unscented kalman filter independent of loading conditions for leakage fault detection and isolation in hydraulic systems

    Nurmi, J. & Mattila, J., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11, May 18-20, 2011, Tampere, Finland. Sairala, H. & Koskinen, K. T. (eds.). Tampere: Scandinavian International Conference on Fluid Power, p. 57-74 (Scandinavian International Conference on Fluid Power SICFP; vol. 12, no. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  30. Published

    Detection and isolation of leakage and valve faults in hydraulic systems in varying loading conditions, Part 2: Fault detection and isolation scheme

    Nurmi, J. & Mattila, J., 2012, In : International Journal of Fluid Power. 13, 1, p. 17-27

    Research output: Contribution to journalArticleScientificpeer-review

  31. Published

    Global energy-optimised redundancy resolution in hydraulic manipulators using dynamic programming

    Nurmi, J. & Mattila, J., Jan 2017, In : Automation in Construction. 73, January 2017, p. 120-134 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  32. Published

    Dynamics of a True Moving Bed separation process: Linear model identification and advanced process control

    Nogueira, I. B. R., Ribeiro, A. M., Martins, M. A. F., Rodrigues, A. E., Koivisto, H. & Loureiro, J. M., 30 Jun 2017, In : Journal of Chromatography A. 1504

    Research output: Contribution to journalArticleScientificpeer-review

  33. Published

    Complex elevator system DSM-case for a DSM design sprint

    Niutanen, V., Hölttä-Otto, K., Rahardjo, A., Stowe, H. M., Helo, P. & Pulkkinen, A., 2017, Understand, Innovate, and Manage your Complex System! - Proceedings of the 19th International DSM Conference. The Design Society, p. 259-264 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  34. Published

    Clustering Analysis for Secondary Breaking Using a Low-Cost Time-of-Flight Camera

    Niu, L., Aref, M. M. & Mattila, J., Nov 2018, 2018 Ninth International Conference on Intelligent Control and Information Processing (ICICIP). IEEE, p. 318-324 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  35. Published

    On the orientation probability distribution of flexible fibres in a contracting channel flow

    Niskanen, H., Eloranta, H., Tuomela, J. & Hämäläinen, J., 2011, In : International Journal of Multiphase Flow. 37, 4, p. 336-345

    Research output: Contribution to journalArticleScientificpeer-review

  36. Published

    The cross-sectional area of the gluteus maximus muscle varies according to habitual exercise loading: Implications for activity-related and evolutionary studies

    Niinimäki, S., Härkönen, L., Nikander, R., Abe, S., Knüsel, C. & Sievänen, H., 2016, In : HOMO: Journal of Comparative Human Biology. 67, 2, p. 125-137

    Research output: Contribution to journalArticleScientificpeer-review

  37. Published

    Data aggregation at field device level for industrial ambient monitoring using web services

    Nieto Lee, A. & Martinez Lastra, J. L., 2011, IEEE 9th International Conference on Industrial Informatics, INDIN 2011, 26-29 July, 2011, Caparica, Lisbon, Portugal. Piscataway, NJ: IEEE, p. 491-496 (International Conference on Industrial Informatics INDIN).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  38. Published

    Enhancement of industrial monitoring systems by utilizing context awareness

    Nieto Lee, A. & Martinez Lastra, J. L., 2013, 3rd IEEE International Multi-Disciplinary Conference on Cognitive Methods in Situation Awareness and Decision Support (CogSIMA), February 26-28, 2013, San Diego, CA, USA. Piscataway: Institute of Electrical and Electronics Engineers, IEEE, p. 277-284 8 p. (IEEE International Multi-Disciplinary Conference on Cognitive Methods in Situation Awareness and Decision Support).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  39. Published

    Pro-active content managing system for efficient human machine interaction in data intensive environments

    Nieto Lee, A. N., Evchina, Y., Dvoryanchikova, A. & Martinez Lastra, J. L., 2013, Proceedings 2013 11th IEEE international conference on industrial informatics INDIN, Bochum, Germany, July 29-31, 2013. Piscataway: Institute of Electrical and Electronics Engineers IEEE, p. 790-796 6 p. (IEEE international conference on industrial informatics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  40. Published

    Parallel pump-controlled multi-chamber cylinder

    Niemi-Pynttäri, O., Linjama, M., Laamanen, A. & Huhtala, K., 2014, ASME/BATH 2014 Symposium on Fluid Power and Motion Control, FPMC2014, September 10-12, 2014, Bath, United Kingdom. The American Society of Mechanical Engineers ASME, p. 1-9 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  41. Published

    Availability modeling approach for future circular colliders based on the LHC operation experience

    Niemi, A., Apollonio, A., Gutleber, J., Sollander, P., Penttinen, J-P. & Virtanen, S., 2016, In : Physical Review Special Topics: Accelerators and Beams. 19, 12, 121003.

    Research output: Contribution to journalArticleScientificpeer-review

  42. Published

    Modeling Future Hadron Colliders’ Availability for Physics

    Niemi, A., 17 Apr 2019, Tampere University. 130 p. (Tampere University Dissertations; vol. 48)

    Research output: Book/ReportDoctoral thesisMonograph

  43. Published

    Competence needs and a model for the teaching strategy development of mechanical designers in product development

    Nevaranta, J., 31 Oct 2014, Tampere: Tampere University of Technology. 141 p. (Tampere University of Technology, Publication; vol. 1245)

    Research output: Book/ReportDoctoral thesisMonograph

  44. Published

    A builder for adaptable human machine interfaces for mobile devices

    Neira, O., Nieto Lee, A., Martinez Lastra, J. L. & Camp, R. S., 2013, Proceedings 2013 11the IEEE international conference on industrial informatics INDIN, Bochum, Germany, July 29-31, 2013. Piscataway: Institute of Electrical and Electronics Engineers IEEE, p. 750-755 6 p. (IEEE international conference on industrial informatics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  45. Published

    Reel-to-reel inline atmospheric plasma deposition of hydrophobic coatings

    Nättinen, K., Nikkola, J., Minkkinen, H., Heikkilä, P., Lavonen, J-P. & Tuominen, M., 2011, In : Journal of Coatings Technology and Research. 8, 2, p. 235-245

    Research output: Contribution to journalArticleScientificpeer-review

  46. Published

    Aligning product design methods and tools for sustainability

    Nahkala, S., 2013, Proceedings of the 20th CIRP, International Conference on life cycle engineering, Singapore, 17-19 April, 2013. Nee, A. Y. C., Song, B. & Ong, S-K. (eds.). Springer Singapore, p. 53-58 6 p. (Re-engineering manufacturing for sustainability).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  47. Published

    Knowledge-based optimization of artificial neural network topology for process modeling of fused deposition modeling

    Nagarajan, H., Jafarian, H., Hamedi, A., Mokhtarian, H., Prod'hon, R., Tilouche, S., Coatanea, E. & Nenchev, V., 2018, Proceedings of the ASME 2018 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2018): Volume 4: 23rd Design for Manufacturing and the Life Cycle Conference; 12th International Conference on Micro- and Nanosystems. Aug. 26-29, 2018, Quebec City, Canada.. ASME International, Vol. 4. 12 p. DETC2018-86187

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  48. Published

    Knowledge-based optimization of artificial neural network topology for additive manufacturing process modeling: a case study for fused deposition modeling: A new approach and case study for fused deposition modeling

    Nagarajan, H. P. N., Mokhtarian, H., Jafarian, H., Dimassi, S., Bakrani Balani, S., Hamedi, A., Coatanea, E., Wang, G. G. & Kari R., H., Feb 2019, In : Journal of Mechanical Design. 141, 2

    Research output: Contribution to journalArticleScientificpeer-review

  49. Published

    Production of sulfonated polyetheretherketone/polypropylene fibers for photoactive textiles

    Mylläri, V., Fatarella, E., Ruzzante, M., Pogni, R., Baratto, M. C., Skrifvars, M., Syrjälä, S. & Järvelä, P., 1 Oct 2015, In : Journal of Applied Polymer Science. 132, 39, 42595.

    Research output: Contribution to journalArticleScientificpeer-review

  50. Published

    A comparison of rheology and FTIR in the study of polypropylene and polystyrene photodegradation

    Mylläri, V., Ruoko, T-P. & Syrjälä, S., 1 Jul 2015, In : Journal of Applied Polymer Science. 132, 28, 6 p., 42246.

    Research output: Contribution to journalArticleScientificpeer-review

Previous 1...5 6 7 8 9 10 11 12 ...25 Next
Download list To download, please limit the number of search results to 1,000 or less.