Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. Published

    Automaattinen öljyn epäpuhtauksien mittaus ja keskeiset standardit

    Multanen, P., Niiranen, E., Elo, L. & Rinkinen, J., 2014, PAMAS 2014 Käyttäjäpäivä, 4.2.2014, Tampereen teknillinen yliopisto, Tampere. Rinkinen, J., Multanen, P., Elo, L. & Niiranen, E. (eds.). Tampere: Tampereen teknillinen yliopisto, p. 43-70 28 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  2. Published

    Utilization of R&D Simulators to Support the Maintenance of Mobile Work Machines

    Multanen, P. & Hyvönen, M., 2011, The Eight International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 20-22 June 2011, Cardiff, Wales. Northamption: British Institute of Non-destructive Testing, p. 1263-1274 (International Conference on Condition Monitoring and Machinery Failure Prevention Technologies; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  3. Published

    Energy efficiency in double disc chip refining; Influence of intensity by segment design

    Muhic, D., Huhtanen, J-P., Sundström, L., Sandberg, C., Ullmar, M., Vuorio, P. & Engstrand, P., 2010, 7th International Seminar on Fundamental Mechanical Pulp Research (IFMPRS 2010), June 21-23, 2010, Nanjing, China. p. 109-117 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  4. Published

    Energy efficiency in double disc refining - Influence of intensity by segment design

    Muhic, D., Huhtanen, J-P., Sundström, L., Sandberg, C., Ullmar, M., Vuorio, P. & Engstrand, P., 2011, In : Nordic Pulp and Paper Research Journal. 3, p. 1-8 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  5. Published

    Impedance control of redundant manipulators

    Muhammad, A. & Vilenius, M., 2010, Proceedings of the 6th FPNI - PhD Symposium West Lafayette 2010, June 15-19 2010, Indiana, USA. Ivantysynova, M. (ed.). p. 153-163

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  6. Published

    Development of water hydraulic manipulator for the remote handling of heavy duty components

    Muhammad, A., Valkama, P., Siuko, M., Mattila, J. & Vilenius, M., 2010, 7th International Fluid Power Conference (7th IFK), 22-24 March 2010, Aachen, Germany. p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  7. Published

    Advantage of redundancy in the controllability of remote handling manipulator

    Muhammad, A., Mattila, J., Vilenius, M., Siuko, M. & Semeraro, L., 2011, In : Fusion Engineering and Design. 86, 9-11, p. 1882-1885

    Research output: Contribution to journalArticleScientificpeer-review

  8. Published

    Synchronization to wirelessly teleoperate a hydraulic skid steered mobile machine from control station

    Moya, J. & Huhtala, K., 2009, Seventh IEEE International Conference on Control and Automation ICCA 2009, December 9-11, 2009, New Zealand. p. 1992-1996

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  9. Published

    Liikenteen kiitollisuudenvelka

    Montonen, J., 2013, In : Pikajalka. 13, 27, p. 3-3 1 p.

    Research output: Contribution to journalArticleGeneral public

  10. Published

    Polkupyörä on rock!

    Montonen, J., 2013, In : Pikajalka. 13, 24, p. 3-3 1 p.

    Research output: Contribution to journalArticleGeneral public

  11. Published

    Mopoiluni on manifesti

    Montonen, J., 2013, In : Pikajalka. 13, 26, p. 3-3 1 p.

    Research output: Contribution to journalArticleGeneral public

  12. Published

    Dynamics of single-hit pneumatic test drill for pulse-shaping analysis of impacting waves

    Montonen, J., Keskinen, E., Cotsaftis, M., Miettinen, J. & Seemann, W., 2013, Proceedings of the ASME 2013 International Mechanical Engineering Congress and Exposition, IMECE2013, November 15-21, 2013, San Diego, California, USA. ASME, p. 1-7 7 p. 64835. (ASME International Mechanical Engineerig Congress and Exposition).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  13. Published

    Filtering scheme for context-aware fog computing in cyber-physical systems

    Mononen, T., M. Aref, M. & Mattila, J., 2018, 14th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications (MESA): 2-4 July 2018, Oulu.. Oulu: IEEE, 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  14. Published

    Analysis of the Effects of Path Properties on Autonomous Motion Control of a Hydraulic Tracked Vehicle

    Mononen, T., Aref, M. M. & Mattila, J., Nov 2018, 2018 25th International Conference on Mechatronics and Machine Vision in Practice (M2VIP). IEEE, 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  15. Published

    Design-optimization of cylindrical, layered composite structures using efficient laminate parameterization

    Mönicke, A., Katajisto, H., Leroy, M., Petermann, N., Kere, P. & Perillo, M., 2012, 12th European Conference on Spacecraft Structures, Materials and Environmental Testing, Noordwijk, the Netherlands, 20-23 March, 2012. ESA SP. European Space Agency, p. 1-6 6 p. (ESA - SP; vol. 691).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  16. Published

    A Network based modelling approach using the dimensional analysis conceptual modeling (DACM) framework for additive manufacturing technologies

    Mokhtarian, H., Coatanea, E., Paris, H., Ritola, T., Ellman, A., Vihinen, J., Koskinen, K. & Ikkala, K., 21 Aug 2016, Proceedings of the ASME 2016 Computers and Information in Engineering Conference IDETC/CIE 2016. Charlotte, North Carolina : ASME, 9 p. DETC2016-60473

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  17. Published

    Function modeling combined with physics-based reasoning for assessing design options and supporting innovative ideation

    Mokhtarian, H., Coatanea, E. & Paris, H., 2017, In : AI EDAM - Artificial Intelligence for Engineering Design Analysis and Manufacturing. 31, 4, p. 476-500 25 p.

    Research output: Contribution to journalArticleScientificpeer-review

  18. Published

    Toward Developing Surrogate Model Integrating Multi-physics, Multi-criteria Models for Additive Manufacturing Technologies

    Mokhtarian, H., Coatanea, E., Paris, H., Vihinen, J., Ikkala, K. & Kiviö, J., Oct 2016, Proceedings of the 1st Annual SMACC Research Seminar 2016. p. 40-42

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  19. Published

    A conceptual design and modeling framework for integrated additive manufacturing

    Mokhtarian, H., Coatanea, E., Paris, H., Mansor Mbow, M., Pourroy, F., René Marin, P., Vihinen, J. & Ellman, A., 28 Apr 2018, In : Journal of Mechanical Design. 140, 8, 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  20. Published

    Identification of fundamental requirements for ideal metamodeling framework in additive manufacturing

    Mokhtarian, H., Coatanea, E., Paris, H. & Vihinen, J., 2017, Proceedings of the 2nd Annual SMACC Research Seminar 2017. Aaltonen, J., Virkkunen, R., Koskinen, K. T. & Kuivanen, R. (eds.). p. 29-31 3 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  21. Published

    Product-Process Integrated Meta-Modeling Using a Graph-Based Approach: Application to Additive Manufacturing

    Mokhtarian, H., 27 Mar 2019, Tampere University. 154 p. (Tampere University Dissertations; vol. 36)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  22. Published

    Probabilistic Modelling of Defects in Additive Manufacturing: A Case Study in Powder Bed Fusion Technology

    Mokhtarian, H., Hamedi, A., Nagarajan, H., Panicker, S., Coatanea, E. & Haapala, K., 31 Dec 2018, 52nd CIRP Conference on Manufacturing Systems. Elsevier, p. 956-961 (Procedia CIRP; vol. 81).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  23. Published

    Image Based Local Strain Measurement of Wood

    Moilanen, C. S., Saarenrinne, P., Engberg, B. A. & Björkqvist, T., 2014, Advancement of Optical Methods in Experimental Mechanics Volume 3, Conference Proceedings of the Society for Experimental Mechanics Series. Jin, H., Sciammarella, C., Yoshida, S. & Lamberti, L. (eds.). Berlin: Springer, p. 339-345 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  24. Published

    Radial compression behavior of Norway spruce at high strain-rate

    Moilanen, C., Björkqvist, T., Saarenrinne, P., Engberg, B. A. & Salminen, L., 2013, 8th International Fundamental Mechanical Pulp Research Seminar, 29 - 31 January, 2013, Åre, Sweden. p. 10-11 2 p. (International Fundamental Mechanical Pulp Research Seminar).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  25. Published

    Local compression behaviour of pre-fatigued and chemically pre-treated wood at high strain rate and high temperature

    Moilanen, C., Engberg, B. A. K., Björkqvist, T., Salminen, L. & Saarenrinne, P., 2014, International Mechanical Pulping Conference, IMPC 2014, 2-5 June 2014, Helsinki, Finland, PULPAPER 2014, 3-5 June, 2014, Helsinki, Finland. AEL, p. 1-4 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  26. Published

    Image-Based Stress and Strain Measurement of Wood in the Split-Hopkinson Pressure Bar

    Moilanen, C. S., Saarenrinne, P., Engberg, B. A. & Björkqvist, T., 2015, In : Measurement Science and Technology. 26, 8, 085206.

    Research output: Contribution to journalArticleScientificpeer-review

  27. Published

    Compression model for radial compression of Norway spruce earlywood and latewood

    Moilanen, C., Björkqvist, T. & Saarenrinne, P., 19 May 2015, 9th International Mechanical Pulping Research Seminar. Trondheim, Norway

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  28. Published

    Wood compression model for radial compression of earlywood and latewood

    Moilanen, C., Björkqvist, T. & Saarenrinne, P., 2015, Proceedings of the XII Finnish Mechanics Days. Rakenteiden Mekaniikan Seura ry, p. 261-266 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  29. Published

    Modelling and Simulation of Radial Spruce Compression to Optimize Energy Efficiency in Mechanical Pulping

    Moilanen, C., Björkqvist, T., Ovaska, M., Koivisto, J., Miksic, A., Engberg, B., Salminen, L., Saarenrinne, P. & Alava, M., 26 Sep 2016, 2016 International Mechanical Pulping (IMPC) Conference Proceedings, Monday, September 26 - Wednesday, September 28, Jacksonville, Florida, USA. USA: TAPPI, p. 53-70 18 p. 1.3

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  30. Published

    Influence of strain rate, temperature and fatigue on the radial compression behaviour of Norway spruce

    Moilanen, C., Björkqvist, T., Ovaska, M., Koivisto, J., Miksic, A., Engberg, B. A., Salminen, L. I., Saarenrinne, P. & Alava, M., 27 Jun 2017, In : Holzforschung. 71, 6, p. 505-514 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  31. Published

    Image based analysis and modelling of Norway spruce compression

    Moilanen, C., 15 Nov 2017, Tampere University of Technology. 56 p. (Tampere University of Technology. Publication; vol. 1505)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  32. Published

    Novel fusion welding technology of Si/glass using ultrashort laser pulses with high pulse repetition rates

    Miyamoto, I., Okamoto, Y., Hansen, A., Amberla, T., Vihinen, J. & Kangastupa, J., 2012, Proceedings of the 31st International Congress on Applications of Lasers & Electro-optics, ICALEO 2012, 23-27 September, 2012, Anaheim, California, USA. Laser Institute of America, p. 784-793 M402. (International Congress on Applications of Lasers & Electro-optics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  33. Published

    High speed, high strength microwelding of Si/glass using ps-laser pulses

    Miyamoto, I., Okamoto, Y., Hansen, A., Vihinen, J., Amberla, T. & Kangastupa, J., 9 Feb 2015, In : Optics Express. 23, 3, p. 3427-3439 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  34. Published

    Levynmuovauksen teemapäivä - Steel forum 2017

    Minkkinen, A., Vuorio, T. & Peura, P., Apr 2018, In : Ohutlevy-lehti. 2018, 1, p. 13-16 4 p.

    Research output: Contribution to journalArticleProfessional

  35. Published

    Jet pump performance in liquid and gas pumping

    Mikkonen, A. & Karvinen, R., 2014, MFIP13, 13th International conference on multiphase flow in industrial plants, Mediterrean Foundation, Sestri Levante (Genova), Italy, 17-19 September 2014. Genova: Italian association of industrial plant enginnering; University of Genova Polytechnic school; Iltalian association of chemical engineering, p. 1-11 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  36. Published

    Solar Panel Breakage During Heavy Rain Caused by Thermal Stress

    Mikkonen, A. & Karvinen, R., Oct 2016, Engineered Transparency 2016: Glass in Architechture and Structural Engineering. Wiley

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  37. Published

    Heat Transfer of Impinging Jet: Effect of Compressibility and Turbulent Kinetic Energy Production

    Mikkonen, A. & Karvinen, R., 2017, IX International Conference on Computational Heat and Mass Transfer (ICCHMT 2016) .

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  38. Published

    Koneiden vikaantumismekanismit

    Miettinen, J., 2011, Kuntoon perustuva kunnossapito ja kunnonvalvonta, 23.-24.11.2011, Tampere. Kunnossapitoyhdistys ProMaint, p. 1-13 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  39. Published

    Full-Field-menetelmä käänteisessä monitoroinnissa

    Miettinen, J. & Ojala, P., 2012, In : Promaint. 26, 5, p. 34-38

    Research output: Contribution to journalArticleProfessional

  40. Published

    Voiteluaineen vaihdon vaikutus

    Miettinen, J., 2010, Värähtelyklinikka 2010, Kunnonvalvonnan uudistaminen, Kunnossapitoyhdistys, 14.-16.4.2010, Silja Symphony, Helsinki-Tukholma-Helsinki. p. 1-9 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  41. Published

    Värähtelymittauksen perusteet

    Miettinen, J., 2011, Kuntoon perustuva kunnossapito ja kunnonvalvonta, 23.-24.11.2011, Tampere. Kunnossapitoyhdistys ProMaint, p. 1-13 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  42. Published

    Nopeutettu elinkaaren määritys, Tampereen teknillisen yliopiston NEM-projekti

    Miettinen, J., 10 Mar 2016, In : Koneviesti. 2016, 4, p. 44-45 2 p.

    Research output: Contribution to journalArticleProfessional

  43. Published

    Mixed Variable Formulations for Truss Topology Optimization

    Mela, K., 2013, Tampere: Tampere University of Technology. 132 p. (Tampere University of Technology. Publication; no. 1134)

    Research output: Book/ReportDoctoral thesisMonograph

  44. Published

    On the equivalence of minimum compliance and stress-constrained minimum weight design of trusses under multiple loading conditions

    Mela, K. & Koski, J., 2012, In : Structural and Multidisciplinary Optimization. 46, 5, p. 679-691

    Research output: Contribution to journalArticleScientificpeer-review

  45. Published

    Multicriterion approach to minimum compliance topology optimization of trusses with comparison to stress-constrained minimum weight design

    Mela, K. & Koski, J., 2010, Advances and Trends in Structural Engineering, Mechanics and Computation. Zingoni, A. (ed.). p. 1081-1084

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  46. Published

    Multicriterion Compliance Minimization and Stress-constrained Minimum Weight Design of a Three-bar Truss

    Mela, K., 2011, Tampere University of Technology. 40 p. (Tampere University of Technology, Department of Mechanics and Design. Research Report; vol. 2)

    Research output: Book/ReportCommissioned reportProfessional

  47. Published

    Information management challenges and enabling factors for utilizing virtual product builds

    Mela, J., Järvenpää, E., Velez, R., Lehtonen, T. & Riitahuhta, A., 2010, The 7th International Conference on Product Lifecycle Management, PLM 10, 12-14 July, 2010, BIBA University of Bremen, Germany. Bremen: BIBA-Bremen Institut Für Produktion und Logistik GmbH, p. 15 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  48. Published

    Stability Analysis of Two Time Delays in Cylindrical Grinding Machine by D-subdivion Method

    Mehmood, F., Yuan, L., Järvenpää, V-M. & Heshmatimanesh, F., 2013, Proceedings in Research Conference in Technical Disciplines, RCITD 2013, 18.-22. November 2013, Slovak Republic. Mokrys, M., Badura, S. & Lieskovsky, A. (eds.). Zilina: EDIS, p. 53-57 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  49. Published

    Creativity from design and Iinnovation perspectives

    Medyna, G., Coatanea, E., Christophe, F., Bakhouya, M., Choulier, D. & Forest, J., 5 Aug 2018, Encyclopedia of creativity, invention, innovation and entrepreneurship. Springer, 8 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  50. Published

    EFDA goal oriented training in remote handling - GOTRH

    Mattila, J., Alho, P., Väyrynen, J., Sibois, R. & Salminen, K., 2012, VALTION TEKNILLINEN TUTKIMUSKESKUS. 3 p. (VTT Science; vol. 7)

    Research output: Book/ReportCommissioned reportProfessional

Previous 1...6 7 8 9 10 11 12 13 ...25 Next
Download list To download, please limit the number of search results to 1,000 or less.