Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. 2019
  2. Published

    Propulsion system development and power consumption in an autonomous underwater vehicle

    Zavari, S., Usenius, O., Villa, J., Heininen, A., Salomaa, T., Laitinen, J., Aaltonen, J. & Koskinen, K. T., 31 Oct 2019, 2019 23rd International Conference on System Theory, Control and Computing (ICSTCC). IEEE, p. 521-524 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  3. Published

    Internal and external stakeholders’ impact on product development curriculum design

    Lindsten, H., Auvinen, P. & Juuti, T., 12 Sep 2019, DS 95: Proceedings of the 21st International Conference on Engineering and Product Design Education (E&PDE 2019), University of Strathclyde, Glasgow. 12th -13th September 2019. The Design Society

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  4. Published

    Shedding frequency in cavitation erosion evolution tracking

    Ylönen, M., Franc, J. P., Miettinen, J., Saarenrinne, P. & Fivel, M., 1 Sep 2019, In : International Journal of Multiphase Flow. 118, p. 141-149 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  5. Published

    Characterization of cracks formed in large flat-on-flat fretting contact

    Juoksukangas, J., Nurmi, V., Hintikka, J., Vippola, M., Lehtovaara, A., Mäntylä, A., Vaara, J. & Frondelius, T., Jul 2019, In : International Journal of Fatigue. 124, p. 361-370 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  6. Published

    An Investigation into Scuffing and Subsurface Fatigue in a Lubricated Rolling/Sliding Contact

    Savolainen, M., 28 Jun 2019, Tampere University. 81 p. (Tampere University Dissertations; vol. 57)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  7. Published

    Adiabatic Heating of Austenitic Stainless Steels at Different Strain Rates

    Vazquez-Fernandez, N. I., Soares, G. C., Smith, J. L., Seidt, J. D., Isakov, M., Gilat, A., Kuokkala, V. T. & Hokka, M., 20 Jun 2019, In : Journal of Dynamic Behavior of Materials. 5, 3, p. 221-229 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  8. Accepted/In press

    Online stabilization of dc power distribution systems applying mimo-identification method and resonance-enhanced voltage controller

    Abdollahi, H., Roinila, T., Arrua, S. & Santi, E., 25 May 2019, (Accepted/In press) Proceedings of the 11th Annual IEEE Energy Conversion Congress and Exposition 2019, IEEE-ECCE: Sept. 29 - Oct. 3 2019, Baltimore, Maryland, USA. IEEE

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  9. Published

    Mass balance control of crushing circuits

    Itävuo, P., Hulthén, E., Yahyaei, M. & Vilkko, M., May 2019, In : Minerals Engineering. 135, p. 37-47 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  10. Published

    Modeling Future Hadron Colliders’ Availability for Physics

    Niemi, A., 17 Apr 2019, Tampere University. 130 p. (Tampere University Dissertations; vol. 48)

    Research output: Book/ReportDoctoral thesisMonograph

  11. Published

    Product-Process Integrated Meta-Modeling Using a Graph-Based Approach: Application to Additive Manufacturing

    Mokhtarian, H., 27 Mar 2019, Tampere University. 154 p. (Tampere University Dissertations; vol. 36)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  12. Published

    Nonlinear model predictive energy management of hydrostatic drive transmissions

    Backas, J. & Ghabcheloo, R., 1 Mar 2019, In : Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering. 233, 3, p. 335-347

    Research output: Contribution to journalArticleScientificpeer-review

  13. Published

    An open modelling approach for availability and reliability of systems

    Penttinen, J-P., Niemi, A., Gutleber, J., Koskinen, K., Coatanea, E. & Laitinen, J., Mar 2019, In : Reliability Engineering and System Safety. 183, p. 387-399 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  14. Published

    Digital hydraulic multi-pressure actuators - simulation study of a forwarder crane

    Heikkilä, M., Huova, M. & Linjama, M., 28 Feb 2019, The 10th Workshop on Digital Fluid Power : February 28th - March 1st, 2019, Linz, Austria. Linz Center of Mechatronics, 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  15. Published

    Switching control of a water hydraulic cylinder with slow parallel-connected on/off valves

    Linjama, M., Grönholm, J. & Paloniitty, M., 28 Feb 2019, The 10th Workshop on Digital Fluid Power : February 28th-March 1st, 2019, Linz, Austria. Linz Center of Mechatronics, 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  16. Published

    A novel method of vibration modes selection for improving accuracy of frequency-based damage detection

    Pan, J., Zhang, Z., Wu, J., Ramakrishnan, K. & Singh, H. K., 15 Feb 2019, In : Composites Part B : Engineering. 159, p. 437-446 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  17. Published

    Knowledge-based optimization of artificial neural network topology for additive manufacturing process modeling: a case study for fused deposition modeling: A new approach and case study for fused deposition modeling

    Nagarajan, H. P. N., Mokhtarian, H., Jafarian, H., Dimassi, S., Bakrani Balani, S., Hamedi, A., Coatanea, E., Wang, G. G. & Kari R., H., Feb 2019, In : Journal of Mechanical Design. 141, 2

    Research output: Contribution to journalArticleScientificpeer-review

  18. Published

    The development of an ontology for describing the capabilities of manufacturing resources

    Järvenpää, E., Siltala, N., Hylli, O. & Lanz, M., Feb 2019, In : Journal of Intelligent Manufacturing. 30, 2, p. 959-978 20 p.

    Research output: Contribution to journalArticleScientificpeer-review

  19. Published

    Why social sustainability counts: The impact of corporate social sustainability culture on financial success

    Schönborn, G., Berlin, C., Pinzone, M., Hanisch, C., Georgoulias, K. & Lanz, M., 1 Jan 2019, In : Sustainable Production and Consumption. 17, p. 1-10 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  20. Published

    Comfort Design in Human Robot Cooperative Tasks

    Changizi, A., Dianatfar, M. & Lanz, M., 2019, Human Systems Engineering and Design - Proceedings of the 1st International Conference on Human Systems Engineering and Design IHSED2018: Future Trends and Applications. Springer Verlag, p. 521-526 6 p. (Advances in Intelligent Systems and Computing; vol. 876).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  21. Published

    Creating resource combinations based on formally described hardware interfaces

    Siltala, N., Järvenpää, E. & Lanz, M., 2019, Precision Assembly in the Digital Age - 8th IFIP WG 5.5 International Precision Assembly Seminar, IPAS 2018, Revised Selected Papers. Springer New York LLC, Vol. 530. p. 29-39 11 p. (IFIP Advances in Information and Communication Technology; vol. 530).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  22. Published

    Customized dimensional analysis conceptual modelling framework for design optimization—a case study on the cross-flow micro turbine model

    Woldemariam, E. T., Coatanéa, E., Wang, G. G., Lemu, H. G. & Wu, D., 2019, In : Engineering Optimization. 51, 7, p. 1168-1184

    Research output: Contribution to journalArticleScientificpeer-review

  23. Published

    Enablers and barriers of smart data-based asset management services in industrial business networks

    Ahonen, T., Hanski, J., Hyvärinen, M., Kortelainen, H., Uusitalo, T., Vainio, H., Kunttu, S. & Koskinen, K., 2019, Lecture Notes in Mechanical Engineering. Pleiades Publishing, p. 51-60 10 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  24. Accepted/In press

    Gas-liquid ratio imbalance indicators of a fighter aircraft shock absorber

    Heininen, A., Aaltonen, J., Koskinen, K. & Huitula, J., 2019, (Accepted/In press) Proceedings of the 13th World Congress on Engineering Asset Management: WCEAM, 24-26 September 2018, Stavanger, Norway. Springer-Verlag, Berlin

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  25. Submitted

    Life end stock need estimation for repairable spare components of obsoleting fleet by simulation

    Toikka, T., Laitinen, J. & Koskinen, K., 2019, (Submitted) WCEAM – 2018: The 13th World Congress On Engineering Asset Management: 24th-26th September, Stavanger, Norway. 10 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  26. Published

    Method for evaluating the value of technology in the manufacturing industry

    Mämmelä, J., Juuti, T., Julkunen, P., Lemmetty, P. & Pakkanen, J., 2019, The 13th World Congress on Engineering assets and public infrastructures in the age of digitalization, WCEAM: 24th-26th September, Stavanger, Norway.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  27. Published

    Microstructure-property relationships of novel ultra-high strength press hardening steels

    Järvinen, H., Honkanen, M., Oja, O., Järvenpää, M. & Peura, P., 2019, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 50, 2, p. 816-836 21 p.

    Research output: Contribution to journalArticleScientificpeer-review

  28. Published

    Running-in effects on friction of journal bearings under slow sliding speeds

    Linjamaa, A., Lehtovaara, A., Kallio, M. & Léger, A., 2019, In : Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology.

    Research output: Contribution to journalArticleScientificpeer-review

  29. Published

    The comfort zone concept in a human-robot cooperative task

    Changizi, A. & Lanz, M., 2019, Precision Assembly in the Digital Age - 8th IFIP WG 5.5 International Precision Assembly Seminar, IPAS 2018, Revised Selected Papers. Springer New York LLC, Vol. 530. p. 82-91 10 p. (IFIP Advances in Information and Communication Technology; vol. 530).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  30. Accepted/In press

    Value creation mechanisms of modularisation and engineering asset lifecycle

    Pakkanen, J., Juuti, T. & Lehtonen, T., 2019, (Accepted/In press) Engineering Assets and Public Infrastructures in the Age of Digitalization: WCEAM, Proceedings of the 13th World Congress on Engineering Asset Management, 24th-26th September, Stavanger, Norway. Springer, 8 p. 120

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  31. 2018
  32. Published

    Probabilistic Modelling of Defects in Additive Manufacturing: A Case Study in Powder Bed Fusion Technology

    Mokhtarian, H., Hamedi, A., Nagarajan, H., Panicker, S., Coatanea, E. & Haapala, K., 31 Dec 2018, 52nd CIRP Conference on Manufacturing Systems. Elsevier, p. 956-961 (Procedia CIRP; vol. 81).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  33. Published

    Aggregated Modeling and Power Hardware-in-the-Loop Emulation of Grid Impedance

    Alenius, H., Messo, T., Reinikka, T. & Roinila, T., 6 Dec 2018, The 10th Annual IEEE Energy Conversion Congress and Exposition (ECCE 2018): September 23-27, 2018, Portland, Oregon, USA. IEEE, p. 4179-4186 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  34. Published

    Improved Real-Time Stability Assessment of Grid-Connected Converters Using MIMO-Identification Methods

    Luhtala, R., Reinikka, T., Roinila, T., Messo, T. & Sihvo, J., 6 Dec 2018, The 10th Annual IEEE Energy Conversion Congress and Exposition (ECCE 2018): September 23 – 27, 2018, Portland, Oregon, USA . IEEE, p. 5322-5329 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  35. Published

    Identifying and addressing challenges in the engineering design of modular systems – case studies in the manufacturing industry

    Pakkanen, J., Juuti, T. & Lehtonen, T., 29 Nov 2018, In : Journal of Engineering Design. 30 p.

    Research output: Contribution to journalArticleScientificpeer-review

  36. Published

    Industrialization of hybrid and additive manufacturing-Implementation to Finnish industry (HYBRAM)

    Riipinen, T., Kujanpää, V., Komi, E., Kilpeläinen, P., Savolainen, M., Puukko, P., Vihinen, J., Coatanea, E. & Mokhtarian, H., 26 Nov 2018, VTT Technical Research Centre of Finland. 66 p. (Research Reports)

    Research output: Book/ReportCommissioned reportProfessional

  37. Published

    3D Attitude Calculation for the Grasper of a Crane System with a Rotary Gyroscope

    Zhang, X., Mustalahti, P., Peltola, E. & Mattila, J., Nov 2018, 2018 Ninth International Conference on Intelligent Control and Information Processing (ICICIP). IEEE, p. 229-235 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  38. Published

    Analysis of the Effects of Path Properties on Autonomous Motion Control of a Hydraulic Tracked Vehicle

    Mononen, T., Aref, M. M. & Mattila, J., Nov 2018, 2018 25th International Conference on Mechatronics and Machine Vision in Practice (M2VIP). IEEE, 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  39. Published

    Clustering Analysis for Secondary Breaking Using a Low-Cost Time-of-Flight Camera

    Niu, L., Aref, M. M. & Mattila, J., Nov 2018, 2018 Ninth International Conference on Intelligent Control and Information Processing (ICICIP). IEEE, p. 318-324 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  40. Published

    Deep Learning of Robotic Manipulator Structures by Convolutional Neural Network

    Aref, M. M. & Mattila, J., Nov 2018, 2018 Ninth International Conference on Intelligent Control and Information Processing (ICICIP). IEEE, p. 236-242 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  41. Published

    Cavitation erosion resistance assessment and comparison of three francis turbine runner materials

    Ylönen, M., Saarenrinne, P., Miettinen, J., Franc, J-P., Fivel, M. & Nyyssönen, T., 26 Oct 2018, In : Materials Performance and Characterization. 7, 5, p. 1107-1126 20 p.

    Research output: Contribution to journalArticleScientificpeer-review

  42. Published

    Modelling of digital extended enterprise

    Pulkkinen, A., Vainio, V., Anttila, J. P. & Leino, S-P., 17 Oct 2018, 20th International Dependency and Structure Modeling Conference: Oct. 15-17, 2018, Trieste, Italy. Leardi, C., Browning, T. R., Eppinger, R., Steven, D. & Becerril, L. (eds.). The Design Society, p. 139-148 10 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  43. Published

    UX 1 system design - A robotic system for underwater mining exploration

    Martins, A., Almeida, J., Almeida, C., Dias, A., Dias, N., Aaltonen, J., Heininen, A., Koskinen, K., Rossi, C., Dominguez, S., Vörös, C., Henley, S., McLoughlin, M., van Moerkerk, H., Tweedie, J., Bodo, B., Zajzon, N. & Silba, E., 5 Oct 2018, 2018 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS): October, 1-5, 2018, Madrid, Spain. IEEE, p. 1494-1500 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  44. Published

    Social capital characteristics in RD project networks

    Majuri, M. & Lanz, M., 4 Oct 2018, 2018 Portland International Conference on Management of Engineering and Technology (PICMET). IEEE, 8481775

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  45. Published

    Combining Method of Alternating Projections and Augmented Lagrangian for Task Constrained Trajectory Optimization

    Singh, A. K., Ghabcheloo, R., Muller, A. & Pandya, H., 1 Oct 2018, 2018 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS). IEEE, p. 7568-7575 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  46. Published

    Learning from Demonstration for Hydraulic Manipulators

    Suomalainen, M., Koivumäki, J., Lampinen, S., Kyrki, V. & Mattila, J., 1 Oct 2018, 2018 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS). IEEE, p. 3579-3586 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  47. Published

    An application of Cloud Robotics for enhancing the Flexibility of Robotic Cells at Factory Shop Floors

    Hussnain, A., Ferrer, B. R. & Lastra, J. L. M., Oct 2018, IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society. IEEE, p. 2963-2970 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  48. Published

    Experimental investigation of the impact response of novel steelbiocomposite hybrid materials

    Ramakrishnan, K., Hokka, M., Sarlin, E., Kanerva, M., Kouhia, R. & Kuokkala, V-T., 7 Sep 2018, DYMAT 2018 - 12th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading . EDP Sciences, Vol. 183. 6 p. (EPJ WEB OF CONFERENCES).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  49. Published

    Strain rate jump tests on an austenitic stainless steel with a modified tensile Hopkinson split bar

    Vazquez Fernandez, N. I., Isakov, M., Hokka, M. & Kuokkala, V-T., 7 Sep 2018, DYMAT 2018 - 12th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading. EDP Sciences, Vol. 183. (EPJ WEB OF CONFERENCES).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  50. Published

    An executable capability concept in formal resource descriptions

    Siltala, N., Järvenpää, E. & Lanz, M., Sep 2018, In : IFAC-PapersOnLine. 51, 11, p. 102-107 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  51. Published

    Utilizing SPIN rules to infer the parameters for combined capabilities of aggregated manufacturing resources

    Järvenpää, E., Hylli, O., Siltala, N. & Lanz, M., Sep 2018, In : IFAC-PapersOnLine. 51, 11, p. 84-89 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  52. Published

    Mobile robotic spatial odometry by low-cost IMUs: (Inertial Measurement Unit Sensors)

    Zhang, X., Mononen, T., M. Aref, M. & Mattila, J., 30 Aug 2018, 14th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications (MESA): Oulu, July 2-4, 2018.. Oulu: IEEE, 6 p. 8449209

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Previous 1 2 3 4 5 6 7 8 ...25 Next
Download list To download, please limit the number of search results to 1,000 or less.