Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. 1996
  2. The effect of phosphorous and arsenic on the fracture behaviour of a 2,25% Cr-1% Mo Steel

    Lorimer, G. W., Dicken, R., Peura, P., Pilkington, R., Younes, C. M., Allen, G. C. & Holt, M. J., 1 Dec 1996, In : Materials Science Forum. 207-209, PART 2, p. 645-648 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  3. 2008
  4. Measurement theory and dimensional analysis: Methodological impact on the comparison and evaluation process

    Coatanéa, E., Yannou, B., Honkala, S., Lajunen, A., Saarelainen, T. & Makkonen, P., 2008, 19th International Conference on Design Theory and Methodology and 1st International Conference on Micro and Nano Systems, presented at - 2007 ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2007. AMER SOC MECHANICAL ENGINEERS, p. 173-182 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  5. Published

    Statistical modeling of water vapor transmission rates for extrusion-coated papers

    Lahtinen, K. & Kuusipalo, J., 2008, TAPPI 2008 PLACE Conference: Innovations in Flexible Consumer Packaging.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  6. 2009
  7. Published

    The effects of corona and flame treatment: Part 2. PE-HD and PP coated papers

    Lahti, J., Tuominen, M., Penttinen, T., Räsänen, J. P. & Kuusipalo, J., 2009, TAPPI Press - 12th European PLACE Conference 2009. Vol. 1. p. 278-314 37 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  8. 2010
  9. A framework for building behavioral models for design-stage failure identification using dimensional analysis

    Coatanéa, E., Ritola, T., Tumer, I. Y. & Jensen, D., 2010, Proceedings of the ASME Design Engineering Technical Conference. AMER SOC MECHANICAL ENGINEERS, Vol. 5. p. 591-601 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  10. 2011
  11. Published

    Effect of pre-treatments on barrier properties of layers applied by atomic layer deposition onto polymer-coated substrates

    Vähä-Nissi, M., Hirvikorpi, T., Sievänen, J., Salo, E., Harlin, A., Johansson, P. & Kuusipalo, J., 2011, 13th European PLACE Conference 2011. Vol. 1. p. 447 1 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  12. Evaluation of parts of a boat cabin based on exergy - Focusing on environmental and economic assessments

    Medyna, G., Coatanea, E. & Millet, D., 2011, ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011. PARTS A AND B ed. AMER SOC MECHANICAL ENGINEERS, Vol. 4. p. 1083-1092 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  13. Published

    Nanoparticle deposition on packaging materials by the liquid flame spray

    Teisala, H., Tuominen, M., Aromaa, M., Mäkelä, J. M., Stepien, M., Saarinen, J. J., Toivakka, M. & Kuusipalo, J., 2011, 13th European PLACE Conference 2011. Vol. 1. 2 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  14. Published

    Semantic analysis of function-solution duality

    Christophe, F., Ritola, T., Coatanéa, E. & Bernard, A., 2011, ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011. Vol. 3. p. 611-619 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  15. Published

    Self-alignment in the stacking of microchips with mist-induced water droplets

    Chang, B., Sariola, V., Jääskeläinen, M. & Zhou, Q., Jan 2011, In : Journal of Micromechanics and Microengineering. 21, 1, 015016.

    Research output: Contribution to journalArticleScientificpeer-review

  16. Published

    Hexaferrite/polyethylene Composite coatings prepared with flame spraying

    Lisjak, D., Lintunen, P., Hujanen, A., Varis, T., Bolelli, G., Lusvarghi, L., Jagodič, M. & Drofenik, M., 15 Feb 2011, In : Materials Letters. 65, 3, p. 534-536 3 p.

    Research output: Contribution to journalArticleScientificpeer-review

  17. Published

    Optimised selection of new protective coatings for biofuel boiler applications

    Tuurna, S., Varis, T., Penttilä, K., Ruusuvuori, K., Holmström, S. & Yli-Olli, S., Jul 2011, In : Materials and Corrosion-Werkstoffe und Korrosion. 62, 7, p. 642-649 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  18. Published

    Defined-size DNA triple crossover construct for molecular electronics: Modification, positioning and conductance properties

    Linko, V., Leppiniemi, J., Paasonen, S. T., Hytönen, V. P. & Jussi Toppari, J., 8 Jul 2011, In : Nanotechnology. 22, 27, 275610.

    Research output: Contribution to journalArticleScientificpeer-review

  19. Published

    Self-alignment of RFID dies on four-pad patterns with water droplet for sparse self-assembly

    Chang, B., Routa, I., Sariola, V. & Zhou, Q., Sep 2011, In : Journal of Micromechanics and Microengineering. 21, 9, 095024.

    Research output: Contribution to journalArticleScientificpeer-review

  20. Published

    Optical interference lithography using azobenzene-functionalized polymers for micro-and nanopatterning of silicon

    Kravchenko, A., Shevchenko, A., Ovchinnikov, V., Priimagi, A. & Kaivola, M., 22 Sep 2011, In : Advanced Materials. 23, 36, p. 4174-4177 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  21. Published

    Cost optimal and nearly zero (nZEB) energy performance calculations for residential buildings with REHVA definition for nZEB national implementation

    Kurnitski, J., Saari, A., Kalamees, T., Vuolle, M., Niemelä, J. & Tark, T., Nov 2011, In : Energy and Buildings. 43, 11, p. 3279-3288 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  22. 2012
  23. Published

    A system for real-time detection and tracking of vehicles from a single car-mounted camera

    Caraffi, C., Vojir, T., Trefný, J., Šochman, J. & Matas, J., 2012, 2012 15th International IEEE Conference on Intelligent Transportation Systems, ITSC 2012. p. 975-982 8 p. 6338748

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  24. Published

    Biomimetic hemo-compatible surfaces of polyurethane by grafting copolymer brushes of poly(ethylene glycol) and poly(phosphorylcholine methacrylate)

    Yang, D., Feng, Y., Behl, M., Lendlein, A., Zhao, H., Khan, M. & Guo, J., 2012, Multifunctional Polymer-Based Materials. Vol. 1403. p. 171-176 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  25. Published

    Block copolymer self-assembly on ethylene glycol (EG) self-assembled monolayer (SAM) for nanofabrication

    Borah, D., Rasappa, S., Kosmala, B., Holmes, J. D. & Morris, M. A., 2012, Nanoscale Materials Modification by Photon, Ion, and Electron Beams. Vol. 1450. p. 8-13 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  26. Published

    Development of expanded graphite filled natural rubber vulcanizates in presence and absence of carbon black: Mechanical, thermal and morphological properties

    Malas, A., Das, C. K., Das, A. & Heinrich, G., 2012, In : Materials and Design. 39, p. 410-417 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  27. Published

    Effect of rotor pole-shoe construction on losses of inverter-fed synchronous motors

    Rasilo, P., Belahcen, A. & Arkkio, A., 2012, Proceedings - 2012 20th International Conference on Electrical Machines, ICEM 2012. p. 1282-1286 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  28. Published

    Redox-active, organometallic surface-relief gratings from azobenzene-containing polyferrocenylsilane block copolymers

    Ahmed, R., Priimagi, A., Faul, C. F. J. & Manners, I., 14 Feb 2012, In : Advanced Materials. 24, 7, p. 926-931 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  29. Published

    Highly conducting polychloroprene composites based on multi-walled carbon nanotubes and 1-butyl 3-methyl imidazolium bis(trifluoromethylsulphonyl)imide

    Subramaniam, K., Das, A. & Heinrich, G., Jul 2012, In : KGK: KAUTSCHUK GUMMI KUNSTSTOFFE. 65, 7-8, p. 44-46 3 p.

    Research output: Contribution to journalArticleScientificpeer-review

  30. Published

    Implementation of a direct procedure for critical point computations using preconditioned iterative solvers

    Kouhia, R., Tůma, M., Mäkinen, J., Fedoroff, A. & Marjamäki, H., Oct 2012, In : Computers & Structures. 108-109, p. 110-117 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  31. Published

    Co-electrospun blends of PU and PEG as potential biocompatible scaffolds for small-diameter vascular tissue engineering

    Wang, H., Feng, Y., Fang, Z., Yuan, W. & Khan, M., 1 Dec 2012, In : Materials Science and Engineering C: Materials for Biological Applications. 32, 8, p. 2306-2315 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  32. 2013
  33. Published

    Improving the effect of a nanoscale barrier coating on BOPP film properties by surface pretreatments

    Lahtinen, K., Lahti, J., Johansson, P., Seppänen, T. & Cameron, D. C., 2013, 14th European PLACE Conference 2013. TAPPI Press, Vol. 1. p. 469-493 25 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  34. Published

    Materials for electronics by thermal spraying

    Ronkainen, H., Kanerva, U., Varis, T., Ruusuvuori, K., Turunen, E., Peräntie, J., Putaala, J., Juuti, J. & Jantunen, H., 2013, Physical and Numerical Simulation of Materials Processing VII. Vol. 762. p. 451-456 6 p. (Materials Science Forum; vol. 762).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  35. Published

    Modeling of steels and steel surfaces using quantum mechanical first principles methods

    Alatalo, M., Pitkänen, H., Ropo, M., Kokko, K. & Vitos, L., 2013, Physical and Numerical Simulation of Materials Processing VII. Vol. 762. p. 445-450 6 p. (Materials Science Forum; vol. 762).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  36. Published

    Towards an approach for evaluating the quality of requirements

    Mokammel, F., Coatanea, E., Christophe, F., Ba Khouya, M. & Medyna, G., 2013, 33rd Computers and Information in Engineering Conference. American Society of Mechanical Engineers, Vol. 2 B. V02BT02A024

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  37. Published

    Naturally occurring amino acids: A suitable substitute of N-N/-di-phenyl guanidine (DPG) in silica tyre formulation?

    Debnath, S. C., Das, A., Basu, D. & Heinrich, G., Jan 2013, In : KGK: KAUTSCHUK GUMMI KUNSTSTOFFE. 66, 1-2, p. 25-31 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  38. Chemically tailored dielectric-to-metal transition for the design of metamaterials from nanoimprinted colloidal nanocrystals

    Fafarman, A. T., Hong, S. H., Caglayan, H., Ye, X., Diroll, B. T., Paik, T., Engheta, N., Murray, C. B. & Kagan, C. R., 13 Feb 2013, In : Nano Letters. 13, 2, p. 350-357 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  39. Published

    Fabrication of a sub-10 nm silicon nanowire based ethanol sensor using block copolymer lithography

    Rasappa, S., Borah, D., Faulkner, C. C., Lutz, T., Shaw, M. T., Holmes, J. D. & Morris, M. A., 15 Feb 2013, In : Nanotechnology. 24, 6, 065503.

    Research output: Contribution to journalArticleScientificpeer-review

  40. Published

    New design of textile light diffusers for photodynamic therapy

    Cochrane, C., Mordon, S. R., Lesage, J. C. & Koncar, V., 1 Apr 2013, In : Materials Science and Engineering C: Materials for Biological Applications. 33, 3, p. 1170-1175 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  41. Published

    Electrolyte-gated organic field-effect transistor sensors based on supported biotinylated phospholipid bilayer

    Magliulo, M., Mallardi, A., Mulla, M. Y., Cotrone, S., Pistillo, B. R., Favia, P., Vikholm-Lundin, I., Palazzo, G. & Torsi, L., 11 Apr 2013, In : Advanced Materials. 25, 14, p. 2090-2094 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  42. Published

    Controlling liquid spreading using microfabricated undercut edges

    Liimatainen, V., Sariola, V. & Zhou, Q., 24 Apr 2013, In : Advanced Materials. 25, 16, p. 2275-2278 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  43. Published

    A near-infrared optoelectronic approach to detection of road conditions

    Colace, L., Santoni, F. & Assanto, G., May 2013, In : Optics and Lasers in Engineering. 51, 5, p. 633-636 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  44. Shape-dependent plasmonic response and directed self-assembly in a new semiconductor building block, indium-doped cadmium oxide (ICO)

    Gordon, T. R., Paik, T., Klein, D. R., Naik, G. V., Caglayan, H., Boltasseva, A. & Murray, C. B., 12 Jun 2013, In : Nano Letters. 13, 6, p. 2857-2863 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  45. 2014
  46. Published

    An origami inspired reconfigurable spiral antenna

    Saintsing, C. D., Cook, B. S. & Tentzeris, M. M., 2014, 38th Mechanisms and Robotics Conference. The American Society of Mechanical Engineers ASME, Vol. 5B.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  47. Published

    Graph based representation and analyses for conceptual stages

    Coatanéa, E., Nonsiri, S., Christophe, F. & Mokammel, F., 2014, 34th Computers and Information in Engineering Conference. The American Society of Mechanical Engineers ASME, Vol. 1A.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  48. Published

    High performance natural rubber composites with a hierarchical reinforcement structure of carbon nanotube modified natural fibers

    Tzounis, L., Debnath, S., Rooj, S., Fischer, D., Mäder, E., Das, A., Stamm, M. & Heinrich, G., 2014, In : Materials and Design. 58, p. 1-11 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  49. Published

    Improving the effect of nanoscale barrier coating on BOPP film properties: Influence of substrate contamination, web handling and pretreatments

    Lahti, J., Johansson, P., Lahtinen, K., Cameron, D. C. & Seppänen, T., 2014, TAPPI PLACE Conference 2014. TAPPI Press, Vol. 2. p. 1039-1061 23 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  50. Published

    Superhydrophobic Coatings on Cellulose-Based Materials: Fabrication, Properties, and Applications

    Teisala, H., Tuominen, M. & Kuusipalo, J., 1 Feb 2014, In : Advanced Materials Interfaces. 1, 1, p. 1-20 20 p., 1300026.

    Research output: Contribution to journalReview ArticleScientificpeer-review

  51. Published

    Graphoepitaxial Directed Self-Assembly of Polystyrene-Block-Polydimethylsiloxane Block Copolymer on Substrates Functionalized with Hexamethyldisilazane to Fabricate Nanoscale Silicon Patterns

    Borah, D., Rasappa, S., Senthamaraikannan, R., Holmes, J. D. & Morris, M. A., 1 Jun 2014, In : Advanced Materials Interfaces. 1, 3, 1300102.

    Research output: Contribution to journalArticleScientificpeer-review

  52. Published

    Mechanically Switchable Elastomeric Microfibrillar Adhesive Surfaces for Transfer Printing

    Sariola, V. & Sitti, M., 1 Jul 2014, In : Advanced Materials Interfaces. 1, 4, 1300159.

    Research output: Contribution to journalArticleScientificpeer-review

  53. 2015
  54. Published

    Branched thiophene oligomer/polymer bulk heterojunction organic solar cell

    Martinez, F., Neculqueo, G., Vasquez, S. O., Lemmetyinen, H., Efimov, A. & Vivo, P., 2015, Materials Research Society Symposium Proceedings. MATERIALS RESEARCH SOCIETY, Vol. 1737. p. 19-25 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  55. Published

    Detection beyond Debye's length with an electrolyte-gated organic field-effect transistor

    Palazzo, G., De Tullio, D., Magliulo, M., Mallardi, A., Intranuovo, F., Mulla, M. Y., Favia, P., Vikholm-Lundin, I. & Torsi, L., 2015, In : Advanced Materials. 27, 5, p. 911-916 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  56. Published

    Experimental study on the behavior of wear resistant steels under high velocity single particle impacts

    Lindroos, M., Apostol, M., Kuokkala, V. T., Laukkanen, A., Valtonen, K., Holmberg, K. & Oja, O., 2015, In : International Journal of Impact Engineering. 78, p. 114-127 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  57. Published

    Fe2O3-TiO2 Nano-heterostructure Photoanodes for Highly Efficient Solar Water Oxidation

    Barreca, D., Carraro, G., Gasparotto, A., Maccato, C., Warwick, M. E. A., Kaunisto, K., Sada, C., Turner, S., Gönüllü, Y., Ruoko, T-P., Borgese, L., Bontempi, E., Van Tendeloo, G., Lemmetyinen, H. & Mathur, S., 2015, In : Advanced Materials Interfaces. 2, 17

    Research output: Contribution to journalArticleScientificpeer-review

  58. Published

    High Temperature Tension HSB Device Based on Direct Electrical Heating

    Hokka, M., Östman, K., Rämö, J. & Kuokkala, V. T., 2015, Dynamic Behavior of Materials, Volume 1: Proceedings of the 2014 Annual Conference on Experimental and Applied Mechanics. Song, B., Casem, D. & Kimberley, J. (eds.). Springer, Vol. 65. p. 227-233 7 p. (Conference Proceedings of the Society for Experimental Mechanics Series).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  59. Published

    Measurements and Modeling of Frost Depth in Railway Tracks

    Pylkkänen, K., Nurmikolu, A., Guthrie, W. S. & Argyle, H. M., 2015, Proceedings of the International Conference on Cold Regions Engineering: 16th International Conference on Cold Regions Engineering 2015. American Society of Civil Engineers ASCE, p. 123-134 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  60. Published

    Roll-to-roll coating by liquid flame spray nanoparticle deposition

    Mäkelä, J. M., Haapanen, J., Aromaa, M., Teisala, H., Tuominen, M., Stepien, M., Saarinen, J. J., Toivakka, M. & Kuusipalo, J., 2015, Materials Research Society Symposium Proceedings. MATERIALS RESEARCH SOCIETY, Vol. 1747. p. 37-42 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  61. Published

    The correlation between gear contact friction and ball on disc friction measurements

    Björling, M., Miettinen, J., Marklund, P., Lehtovaara, A. & Larsson, R., 2015, In : Tribology International. 83, p. 114-119 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  62. Published

    The deformation, strain hardening, and wear behavior of chromium-alloyed hadfield steel in abrasive and impact conditions

    Lindroos, M., Apostol, M., Heino, V., Valtonen, K., Laukkanen, A., Holmberg, K. & Kuokkala, V. T., 2015, In : Tribology Letters. 57, 3, 24.

    Research output: Contribution to journalArticleScientificpeer-review

  63. Published

    Towards dependable automation

    Seppälä, J. & Salmenperä, M., 2015, Cyber Security: Analytics, Technology and Automation: Part IV. Springer International Publishing, p. 229-249 21 p. (Intelligent Systems, Control and Automation: Science and Engineering; vol. 78).

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  64. Published

    A comparison of five optical surface topography measurement methods

    Mettänen, M. & Hirn, U., 1 Jan 2015, In : TAPPI Journal. 14, 1, p. 27-38 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  65. Published

    Measured energy consumption of educational buildings in a Finnish city

    Sekki, T., Airaksinen, M. & Saari, A., 1 Jan 2015, In : Energy and Buildings. 87, p. 105-115 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  66. Published

    Second-Harmonic Generation from Metal Nanoparticles: Resonance Enhancement versus Particle Geometry

    Czaplicki, R., Mäkitalo, J., Siikanen, R., Husu, H., Lehtolahti, J., Kuittinen, M. & Kauranen, M., 14 Jan 2015, In : Nano Letters. 15, 1, p. 530-534 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  67. Published

    Effect of Multiple Impacts on the Deformation of Wear-Resistant Steels

    Ratia, V., Rojacz, H., Terva, J., Valtonen, K., Badisch, E. & Kuokkala, V. T., 21 Jan 2015, In : Tribology Letters. 57, 2, 15.

    Research output: Contribution to journalArticleScientificpeer-review

  68. Published

    Second-harmonic generation imaging of semiconductor nanowires with focused vector beams

    Bautista, G., Mäkitalo, J., Chen, Y., Dhaka, V., Grasso, M., Karvonen, L., Jiang, H., Huttunen, M. J., Huhtio, T., Lipsanen, H. & Kauranen, M., 6 Feb 2015, In : Nano Letters. 15, 3, p. 1564-1569 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  69. Published

    Corrosion mechanisms of sintered Nd-Fe-B magnets in the presence of water as vapour, pressurised vapour and liquid

    Isotahdon, E., Huttunen-Saarivirta, E., Heinonen, S., Kuokkala, V. T. & Paju, M., 25 Mar 2015, In : Journal of Alloys and Compounds. 626, p. 349-359 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  70. Published

    Smart Skins: Could they be the ultimate sensing tool? Today\uFFFDs industry and personal medical care both strongly demand accurate, reliable, robust, lo

    Le, T., Lin, Z., Wong, C. P. & Tentzeris, M. M., 1 Jun 2015, In : IEEE Nanotechnology Magazine. 9, 2, p. 4-10 7 p., 7080864.

    Research output: Contribution to journalArticleScientificpeer-review

  71. Published

    Transfer printing of metallic microstructures on adhesion-promoting hydrogel substrates

    Wu, H., Sariola, V., Zhu, C., Zhao, J., Sitti, M. & Bettinger, C. J., 1 Jun 2015, In : Advanced Materials. 27, 22, p. 3398-3404 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  72. Published

    Evaluating the electrode measurement sensitivity of subdermal electroencephalography electrodes

    Mendes, M. R., Subramaniyam, N. P. & Wendel-Mitoraj, K., 1 Jul 2015, International IEEE/EMBS Conference on Neural Engineering, NER. IEEE COMPUTER SOCIETY PRESS, Vol. 2015-July. p. 1092-1095 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  73. Published

    On the threshold based neuronal spike detection, and an objective criterion for setting the threshold

    Tanskanen, J. M. A., Kapucu, F. E. & Hyttinen, J. A. K., 1 Jul 2015, International IEEE/EMBS Conference on Neural Engineering, NER. IEEE COMPUTER SOCIETY PRESS, p. 1016-1019 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  74. Published

    Recurrence network analysis of wide band oscillations of local field potentials from the primary motor cortex reveals rich dynamics.

    Subramaniyam, N. P., Hyttinen, J., Hatsopoulos, N. G. & Takahashi, K., 1 Jul 2015, International IEEE/EMBS Conference on Neural Engineering, NER. IEEE COMPUTER SOCIETY PRESS, p. 960-963 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  75. Published

    Fretting-induced friction and wear in large flat-on-flat contact with quenched and tempered steel

    Hintikka, J., Lehtovaara, A. & Mäntylä, A., 2 Jul 2015, In : Tribology International. 92, p. 191-202 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  76. Published

    Divertor remote handling for DEMO: Concept design and preliminary FMECA studies

    Carfora, D., Di Gironimo, G., Järvenpää, J., Huhtala, K., Määttä, T. & Siuko, M., 9 Jul 2015, In : Fusion Engineering and Design. 98-99, p. 1437-1441 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  77. Published

    Lithography-free oxide patterns as templates for self-catalyzed growth of highly uniform GaAs nanowires on Si(111)

    Hakkarainen, T. V., Schramm, A., Mäkelä, J., Laukkanen, P. & Guina, M., 18 Jul 2015, In : Nanotechnology. 26, 27, 275301.

    Research output: Contribution to journalArticleScientificpeer-review

  78. Published

    Improved dimensional stability with bioactive glass fibre skeleton in poly(lactide-co-glycolide) porous scaffolds for tissue engineering

    Haaparanta, A-M., Uppstu, P., Hannula, M., Ellä, V., Rosling, A. & Kellomäki, M., 20 Jul 2015, In : Materials Science and Engineering C: Materials for Biological Applications. 56, p. 457-466 10 p., 5584.

    Research output: Contribution to journalArticleScientificpeer-review

  79. Published

    Analysing traffic fluency from bus data

    Syrjärinne, P., Nummenmaa, J., Thanisch, P., Kerminen, R. & Hakulinen, E., 1 Aug 2015, In : IET Intelligent Transport Systems. 9, 6, p. 566-572 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  80. Published

    Analysis of thermo-active pile structures and their performance under groundwater flow conditions

    Gashti, E. H. N., Malaska, M. & Kujala, K., 11 Aug 2015, In : Energy and Buildings. 105, p. 1-8 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  81. Published

    Impact of building usage and occupancy on energy consumption in Finnish daycare and school buildings

    Sekki, T., Airaksinen, M. & Saari, A., 18 Aug 2015, In : Energy and Buildings. 105, p. 247-257 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  82. Published

    Erbium-doped borosilicate glasses containing various amounts of P2O5 and Al2O3: Influence of the silica content on the structure and thermal, physical, optical and luminescence properties

    Bourhis, K., Massera, J., Petit, L., Koponen, J., Fargues, A., Cardinal, T., Hupa, L., Hupa, M., Dussauze, M., Rodriguez, V. & Ferraris, M., 1 Oct 2015, In : Materials Research Bulletin. 70, p. 47-54 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  83. Published

    Improving the thermal performance of concrete-sandwich envelopes in relation to the moisture behaviour of building structures in boreal conditions

    Fedorik, F., Malaska, M., Hannila, R. & Haapala, A., 15 Nov 2015, In : Energy and Buildings. 107, p. 226-233 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  84. Published

    Differential basal-to-apical accessibility of lamin A/C epitopes in the nuclear lamina regulated by changes in cytoskeletal tension

    Ihalainen, T. O., Aires, L., Herzog, F. A., Schwartlander, R., Moeller, J. & Vogel, V., 1 Dec 2015, In : Nature Materials. 14, 12, p. 1252-1261 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  85. 2016
  86. Published

    Comparative environmental impacts of additive and subtractive manufacturing technologies

    Paris, H., Mokhtarian, H., Coatanéa, E., Museau, M. & Ituarte, I. F., 2016, In : CIRP Annals: Manufacturing Technology. 65, 1, p. 29-32

    Research output: Contribution to journalArticleScientificpeer-review

  87. Published

    Development and numerical implementation of an anisotropic continuum damage model for concrete

    Hartikainen, J., Kolari, K. & Kouhia, R., 2016, Advances in Fracture and Damage Mechanics XV. Trans Tech Publications Ltd, p. 115-118 4 p. (Key Engineering Materials; vol. 713).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  88. Published

    DIC measurements of the human heart during cardiopulmonary bypass surgery

    Hokka, M., Mirow, N., Nagel, H., Vogt, S. & Kuokkala, V-T., 2016, Conference Proceedings of the Society for Experimental Mechanics Series. Springer New York LLC, Vol. 6. p. 51-59 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  89. Published

    Effects of added glazing on Balcony indoor temperatures: Field measurements

    Hilliaho, K., Köliö, A., Pakkala, T., Lahdensivu, J. & Vinha, J., 2016, In : Energy and Buildings. 128, p. 458-472 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  90. Published

    End-plate connections in Bi-axial bending - Measurements

    Mäkinen, J., Fränti, K., Korhonen, M., Fillion, J. & Heinisuo, M., 2016, 13th International Aluminium Conference, Sustainability, Durability and Structural Advantages, : INALCO 2016; Naples; Italy; 21 September 2016 through 23 September 2016. Mazzolani, F. M., Squillace, A., Faggiano, B. & Bellucci, F. (eds.). Trans Tech Publications Ltd, Vol. 710. p. 275-280 6 p. (Key Engineering Materials; vol. 710).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  91. Published

    Nanoscale barrier coating on BOPP packaging film by ALD

    Lahti, J., 2016, TAPPI PLACE Conference 2016: Exploring New Frontiers. TAPPI Press, p. 493-505 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  92. Published

    Normal displacements in non-Coulomb friction conditions during fretting

    Hintikka, J., Lehtovaara, A. & Mäntylä, A., 2016, In : Tribology International. 94, p. 633-639

    Research output: Contribution to journalArticleScientificpeer-review

  93. Published

    Wear and impact behaviour of High Velocity Air-Fuel sprayed Fe-Cr-Ni-B-C alloy coatings

    Bolelli, G., Milanti, A., Lusvarghi, L., Trombi, L., Koivuluoto, H. & Vuoristo, P., 2016, In : Tribology International. 95, p. 372-390

    Research output: Contribution to journalArticleScientificpeer-review

  94. Published

    Static friction measurements on steel against uncoated and coated cast iron

    Andersson, P., Kilpi, L., Holmberg, K., Vaajoki, A. & Oksanen, V., 1 Jan 2016, In : Tribologia. 34, 1-2, p. 5-40 36 p.

    Research output: Contribution to journalArticleScientificpeer-review

  95. Published

    Chemical synthesis of WC-Co from water-soluble precursors: The effect of carbon and cobalt additions to WC synthesis

    Kanerva, U., Karhu, M., Lagerbom, J., Kronlöf, A., Honkanen, M., Turunen, E. & Laitinen, T., 1 Apr 2016, In : International Journal of Refractory Metals and Hard Materials. 56, p. 69-75 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  96. Published

    Influence of specimen type and reinforcement on measured tension-tension fatigue life of unidirectional GFRP laminates

    Korkiakoski, S., Brøndsted, P., Sarlin, E. & Saarela, O., 1 Apr 2016, In : International Journal of Fatigue. 85, p. 114-129 16 p.

    Research output: Contribution to journalArticleScientificpeer-review

  97. Published

    Effects of strain rate and confining pressure on the compressive behavior of Kuru granite

    Hokka, M., Black, J., Tkalich, D., Fourmeau, M., Kane, A., Hoang, N. H., Li, C. C., Chen, W. W. & Kuokkala, V-T., 1 May 2016, In : International Journal of Impact Engineering. 91, p. 183-193 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  98. Published

    Improving the toughness of thermally sprayed Cr 3C 2-NiCr hardmetal coatings by laser post-treatment

    Janka, L., Norpoth, J., Eicher, S., Rodríguez Ripoll, M. & Vuoristo, P., 15 May 2016, In : Materials and Design. 98, p. 135-142 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  99. Published

    Toward the Atomically Abrupt Interfaces of SiOx/Semiconductor Junctions

    Kuzmin, M., Laukkanen, P., Mäkelä, J., Yasir, M., Tuominen, M., Dahl, J., Punkkinen, M. P. J., Kokko, K., Hedman, H. P., Moon, J., Punkkinen, R., Lastusaari, M., Polojärvi, V., Korpijärvi, V-M. & Guina, M., Jun 2016, In : Advanced Materials Interfaces. 3, 11, 1500510.

    Research output: Contribution to journalArticleScientificpeer-review

  100. Published

    High-order lattice-Boltzmann

    Philippi, P. C., Siebert, D. N., Hegele, L. A. & Mattila, K. K., 1 Jun 2016, In : Journal of the Brazilian Society of Mechanical Sciences and Engineering. 38, 5, p. 1401-1419 19 p.

    Research output: Contribution to journalArticleScientificpeer-review

  101. Published

    The role of niobium in improving toughness and corrosion resistance of high speed steel laser hardfacings

    Rodríguez Ripoll, M., Ojala, N., Katsich, C., Totolin, V., Tomastik, C. & Hradil, K., 5 Jun 2016, In : Materials and Design. 99, p. 509-520 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  102. Published

    Spontaneous formation of three-dimensionally ordered Bi-rich nanostructures within GaAs1-xBix/GaAs quantum wells

    Luna, E., Wu, M., Hanke, M., Puustinen, J., Guina, M. & Trampert, A., 1 Jul 2016, In : Nanotechnology. 27, 32, 325603.

    Research output: Contribution to journalArticleScientificpeer-review

  103. Published

    Framework and feasibility study for pairwise comparison tool

    Ellman, A., Wendrich, R. & Tiainen, T., 21 Aug 2016, Proceedings of the ASME 2016 Computers and Information in Engineering Conference IDETC/CIE 2016. Charlotte, North Carolina: ASME, 7 p. DETC2016-59886

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  104. Published

    Barkhausen noise response of three different welded duplex stainless steels

    Lindgren, M., Santa-aho, S. & Vippola, M., 1 Sep 2016, In : Insight. 58, 9, p. 480-486 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  105. Published

    Solar Panel Breakage During Heavy Rain Caused by Thermal Stress

    Mikkonen, A. & Karvinen, R., Oct 2016, Engineered Transparency 2016: Glass in Architechture and Structural Engineering. Wiley

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  106. Published

    A comparison of relative displacement fields between numerical predictions and experimental results in fretting contact

    Juoksukangas, J., Lehtovaara, A. & Mäntylä, A., 1 Oct 2016, In : Proceedings of the institution of Mechanical Engineers Part J: Journal of Engineering Tribology. 230, 10, p. 1273-1287 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  107. Published

    Consideration of energy consumption, energy costs, and space occupancy in Finnish daycare centres and school buildings

    Sekki, T., Andelin, M., Airaksinen, M. & Saari, A., 1 Oct 2016, In : Energy and Buildings. 129, p. 199-206 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  108. Published

    The effect of initial microstructure on the final properties of press hardened 22MnB5 steels

    Järvinen, H., Isakov, M., Nyyssönen, T., Järvenpää, M. & Peura, P., 31 Oct 2016, In : Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing. 676, p. 109-120 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  109. Published

    Experimental and numerical investigation of fretting fatigue behavior in bolted joints

    Juoksukangas, J., Lehtovaara, A. & Mäntylä, A., 1 Nov 2016, In : Tribology International. 103, p. 440-448 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  110. Published

    Multicriteria selection in concept design of a divertor remote maintenance port in the EU DEMO reactor using an AHP participative approach

    Carfora, D., Gironimo, G. D., Esposito, G., Huhtala, K., Määttä, T., Mäkinen, H., Miccichè, G. & Mozzillo, R., 15 Nov 2016, In : Fusion Engineering and Design. 112, p. 324-331 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

Previous 1 2 3 Next