Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. 2010
  2. Published

    Displacement controlled hydraulic systems

    Ahola, V., 2010, Proceedings of the 3rd GIM Scientific Workshop, February 17-18, 2010, Aalto University School of Science and Technology. Halme, A. & Pirttioja, T. (eds.). Espoo, p. 1-13 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  3. Published

    Domain ontologies for reasoning machines in factory automation

    Martinez Lastra, J. L., Delamer, I. M. & Ubis, F., 2010, USA: International Society of Automation (ISA). 138 p.

    Research output: Book/ReportBookProfessional

  4. Published

    Driving feel generation of the mobile machine simulator with the water hydraulic 6-DOF motion platform

    Rokala, M., Sairiala, H. & Koskinen, K. T., 2010, 7th International Fluid Power Conference (7th IFK), 22-24 March 2010, Aachen, Germany. p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  5. Published

    Dynamics of wire-driven machine mechanisms: Literature review

    Karvinen, T. & Keskinen, E., 2010, Dynamical Systems: Discontinuity, Stochasticity abd Time-Delay. Luo Albert, C. J. (ed.). p. 285-298

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  6. Published

    Dynamics of wire-driven machine mechanisms, Part II: Theory and applications

    Keskinen, E., Karvinen, T. & Montonen, J., 2010, Dynamical Systems: Discontinuity, Stochasticity abd Time-Delay. Luo Albert, C. J. (ed.). p. 299-317

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  7. Published

    Early phase concept evaluation

    Vanhatalo, M., Pakkanen, J., Lehtonen, T., Riitahuhta, A. & Juuti, T., 2010, NordDesign 2010 Conference, 25-27 August, 2010, Göteborg, Sweden. Dagman, A. & Söderberg, R. (eds.). p. 10 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  8. Published

    Edwards-Venn diagrams for knowledge representation and reasoning in industrial systems

    Dvoryanchikova, A., Lobov, A., Capanji, A. & Martinez Lastra, J. L., 2010, 15th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA 2010, September 13-16, 2010, Bilbao, Spain. p. 1-7 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  9. Published

    Effect of asymmetric heat transfer on glass deformations

    Aronen, A., 2010, Conference on Architectural and Structural Applications of Glass Faculty of Architecture, Challenging Glass 2, Delft University of Technology, 20-21 May 2010, the Netherlands. Bos, F., Louter, C. & Veer, F. (eds.). p. 279-285

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  10. Published

    Elävien kuvien linja-auto

    Lehtonen, T., 2010, Peltitähdet - Auto elokuvissa. Levä, K. (ed.). Kerava: Mobilia säätiö, p. 83-94

    Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

  11. Published

    Energy efficiency in double disc chip refining; Influence of intensity by segment design

    Muhic, D., Huhtanen, J-P., Sundström, L., Sandberg, C., Ullmar, M., Vuorio, P. & Engstrand, P., 2010, 7th International Seminar on Fundamental Mechanical Pulp Research (IFMPRS 2010), June 21-23, 2010, Nanjing, China. p. 109-117 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  12. Published

    Energy efficiency of three-chamber cylinder with digital valve system

    Huova, M., Laamanen, A. & Linjama, M., 2010, In : International Journal of Fluid Power. 11, 3, p. 15-22

    Research output: Contribution to journalArticleScientificpeer-review

  13. Published

    Energy efficient control of multiactuator digital hydraulic mobile machine

    Huova, M., Karvonen, M., Ahola, V., Linjama, M. & Vilenius, M., 2010, 7th International Fluid Power Conference (7th IFK), 22-24 March 2010, Aachen, Germany. p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  14. Published

    Energy reduction in chip refining by optimization of operating parameters and segment design

    Huhtanen, J-P., Ruola, V. & Vuorio, P., 2010, 7th International Seminar on Fundamental Mechanical Pulp Research (IFMPRS 2010), June 21-23, 2010, Nanjing, China. p. 125-129

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  15. Published

    Enhancing laser scanner accuracy by grid correction

    Halme, R-J., Kumpulainen, T. & Tuokko, R., 2010, Photonics West 2010 - MOEMS-MEMS: Micro- and Nanofabrication, 23-28 January, 2010, San Francisco, California, USA. Proceedings of SPIE. Maher, M. A., Chiao, J-C. & Resnick Paul, J. (eds.). Bellingham, WA: SPIE, p. 1-9 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  16. Published

    Enhancing learning by utilising students on creating course material and course grading evaluation

    Rapo, L. & Vanhatalo, M., 2010, Proceedings of XI International Conference on Engineering and Computer Education, INTERTECH'2010, Engineering and Technology Education Innovating for Growth, 7-10 March, 2010, Ilhéus, Brazil. p. 174-178

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  17. Published

    Evaluation of lubrication conditions in gear contacts using contact resistance and bulk temperature measurements

    Kleemola, J. & Lehtovaara, A., 2010, In : Proceedings of the institution of Mechanical Engineers Part J: Journal of Engineering Tribology. 224, 4, p. 367-375

    Research output: Contribution to journalArticleScientificpeer-review

  18. Published

    Experiences of monitoring the condition of military aircraft hydraulic systems

    Virta, P., Aaltonen, J., Koskinen, K. T. & Vilenius, M., 2010, In : Condition Monitor. 280, p. 9-14

    Research output: Contribution to journalArticleProfessional

  19. Published

    Experimental evaluation of a digital hydraulic power management system

    Heikkilä, M., Tammisto, J., Huova, M., Huhtala, K. & Linjama, M., 2010, Proceedings of the Third Workshop on Digital Fluid Power, October 13-14 2010, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). p. 129-142

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  20. Published

    Experimental evaluation of a piston-type digital pump-motor-transformer with two independent outlets

    Heikkilä, M., Tammisto, J., Huova, M., Huhtala, K. & Linjama, M., 2010, Fluid Power and Motion Control (FPMC 2010), 15-17 September 2010, University of Bath, UK. Johnston, D. N. & Plummer, A. (eds.). p. 83-97

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  21. Published

    Experimental methods for the evaluation of lubrication conditions in gear contacts

    Kleemola, J., 2010, Tampere: Tampere University of Technology. (Tmpereen teknillinen yliopisto. Julkaisu; vol. 894)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  22. Published

    Experimental study on control system distribution and effects of remote control in hydraulic mobile machines

    Uusisalo, J., 2010, Proceedings of the 3rd GIM Scientific Workshop, February 17-18, 2010, Aalto University School of Science and Technology. Halme, A. & Pirttioja, T. (eds.). p. 1-11 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  23. Published

    Experimental study on effects of remote control and control system distribution in hydraulic mobile machines

    Uusisalo, J. & Huhtala, K., 2010, Proceedings of the Post-Graduate Workshop on Intelligent Machines and Transport Systems, May 3-7, 2010, CERN, Switzerland. Karvinen, T. & Keskinen, E. (eds.). p. 1-11 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  24. Published

    Factory level logistics and control aspects for flexible and reactive microfactory concept

    Järvenpää, E., Heikkilä, R. & Tuokko, R., 2010, Frontiers of Assembly and Manufacturing - Selected papers from ISAM 2009. Lee, S., Suarez, R. & Choi, B-W. (eds.). Springer-Verlag Berlin Heidelberg, p. 127-140

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  25. Published

    Feature-based unfolding algorithm for sheet metal products

    Garcia, F., Lanz, M., Luostarinen, P. & Andersson, P. H., 2010, 5th International Conference on Production Research, ICPR 2010 Americas, 21-23 July, 2010, Bogotá, Colombia. p. 5 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  26. Published

    Formal methods in factory automation

    Popescu, C. & Martinez Lastra, J. L., 2010, Factory Automation. Silvestre-Blanes, J. (ed.). Croatia: In-Teh, p. 463-475

    Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

  27. Published

    Framework and toolset for developing and realizing sustainable production systems

    Nylund, H., Koho, M. & Torvinen, S., 2010, Proceedings of the 20th International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2010, July 12-14, 2010, California State University East Bay, USA. p. 294-301

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  28. Published

    Geometrically exact beam formulation versus absolute nodal coordinate formulation

    Mäkinen, J. & Matikainen, M., 2010, The 1st Joint International Conference on Multibody System Dynamics, May 25-27, 2010, Lappeenranta, Finland. p. 1-10 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  29. Published

    Geometry of plate fins for maximizing heat transfer

    Karvinen, R. & Karvinen, T., 2010, 14th International Heat Transfer Conference IHTC-14, August 8-13, 2010, Washington DC, USA. ASME, p. 1-10 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  30. Published

    GVT-Getriebe mit hydrostatischer Verstelleinheit

    Erkkilä, M. & Viitasalo, V., 2010, In : Mobile Maschinen. 1/2010, p. 32-33

    Research output: Contribution to journalArticleScientific

  31. Published

    Hydrauliikan komponenttipuhtausstandardien hyödyntäminen suomalaisessa konepajateollisuudessa

    Rinkinen, J., 2010, In : Fluid Finland. 1/2010, p. 18-23

    Research output: Contribution to journalArticleScientific

  32. Published

    Hydraulikomponenttien käyttöikä

    Rinkinen, J. & Immonen, A., 2010, In : Fluid Finland. 1/2010, p. 8-11

    Research output: Contribution to journalArticleScientific

  33. Published

    Impact of energy measurements in machining operations

    Lanz, M., Mani, M., Leong, S., Lyons, K., Ranta, A., Ikkala, K. & Bengtsson, N., 2010, Proceeding of the ASME 2010 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2010, August 15-18, 2010, Montreal, Quebec, Canada. p. 7 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  34. Published

    Impedance control of redundant manipulators

    Muhammad, A. & Vilenius, M., 2010, Proceedings of the 6th FPNI - PhD Symposium West Lafayette 2010, June 15-19 2010, Indiana, USA. Ivantysynova, M. (ed.). p. 153-163

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  35. Published

    Implementation of a direct procedure for critical point computations

    Mäkinen, J., Kouhia, R., Fedoroff, A. & Marjamäki, H., 2010, Proceedings of The Tenth International Conference on Computational Structures Technology, 14-17 September, 2010, Valencia, Spain. Topping, B. H. V., Adam, J. M., Pallares, F. J., Bru, R. & Romero, M. L. (eds.). p. 1-13 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  36. Published

    Improvements to refiner performance with flow modeling and optimization

    Lindstedt, M., Huhtanen, J-P. & Karvinen, R., 2010, 7th International Seminar on Fundamental Mechanical Pulp Research (IFMPRS 2010), June 21-23, 2010, Nanjing, China. p. 202-210

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  37. Published

    Improving resolution of digital hydraulic valve system by utilizing fast switching valves

    Huova, M. & Plöckinger, A., 2010, Proceedings of the Third Workshop on Digital Fluid Power, October 13-14 2010, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). p. 79-92

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  38. Published

    Information management challenges and enabling factors for utilizing virtual product builds

    Mela, J., Järvenpää, E., Velez, R., Lehtonen, T. & Riitahuhta, A., 2010, The 7th International Conference on Product Lifecycle Management, PLM 10, 12-14 July, 2010, BIBA University of Bremen, Germany. Bremen: BIBA-Bremen Institut Für Produktion und Logistik GmbH, p. 15 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  39. Published

    Intelligent Machines and Transport Systems, Post-Graduate Workshop on Intelligent Machines and Transport Systems, May 3-7, 2010, Cern, Switzerland

    Karvinen, T. (ed.) & Keskinen, E. (ed.), 2010, Unknown Publisher.

    Research output: Book/ReportAnthologyScientificpeer-review

  40. Published

    Introduction to contact modelling - Part 1

    Lehtovaara, A., 2010, Striking Surfaces, International Seminar on Wear Control, Tampere University of Technology, Tampere Wear Center, 20.10.2010. p. 14 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  41. Published

    Inverse Methods for Continuous Balancing of Flexible Rolls

    Jokinen, K., 2010, Tampere: Tampere University of Technology. 107 p. (Tampereen teknillinen yliopisto. Julkaisu; vol. 944)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  42. Published

    Kehittyneet kelausteknologiat automatisoituna 3D-komposiittikappaleiden valmistusmenetelmänä - 3D FiWi

    Vuorinen, J. & Ellman, A., 2010, SISU 2010 - uusi tuotantoajattelu: loppuraportti. Tekesin ohjelmaraportti. p. 94-98

    Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

  43. Published

    Kehitystä putkistopassin koulutusmateriaaliin

    Rinkinen, J. & Virta, S., 2010, In : Fluid Finland. 1/2010, p. 28-30

    Research output: Contribution to journalArticleScientific

  44. Published

    Koneenosien suunnittelu

    Airila, M., Ekman, K., Hautala, P., Kivioja, S., Kleimola, M., Martikka, H., Miettinen, J., Niemi, E., Ranta, A., Rinkinen, J., Salonen, P., Verho, A., Vilenius, M. & Välimaa, V., 2010, Unknown Publisher. 796 p.

    Research output: Book/ReportBookProfessional

  45. Published

    Koulutuksesta ja tutkimuksesta

    Huhtala, K., 2010, In : Fluid Finland. 9, 3-4, p. 6-6

    Research output: Contribution to journalArticleScientific

  46. Published

    Laitteisto, ohjauspiiri ja menetelmä paineen ja tilavuusvirran tuottamiseksi

    Linjama, M., Tammisto, J., Huhtala, K. & Vilenius, M., 2010, Patent No. Pat. FI 121090 B, Priority date 30 Jun 2010, Priority No. (21) FI 20085242

    Research output: PatentScientific

  47. Published

    Laser produced grinding burns for Barkhausen noise measurement result validation

    Santa-Aho, S., Sorsa, A., Vippola, M., Latokartano, J., Lindgren, M. & Lepistö, T., 2010, The Seventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies CM2010 / MFPT 2010, 22-24 June 2010, Ettington Chase, Stratford-upon-Avon, England. p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  48. Published

    Logical and semantical foundations for knowledge representation for assembly and manufacturing processes

    Lanz, M. & Tuokko, R., 2010, Proceeding of Post-Graduate Workshop on Intelligent Machines and Transport Systems, 3-7 May 2010, CERN, Switzerland. p. 98-109 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  49. Published

    M1-teknologialla voidaan rakentaa virtuaalisia oppimisympäristöjä ja konelaboratorioita

    Koskinen, K. T., Leino, T., Palonen, T. & Ranta, P., 2010, In : Fluid Finland. 2/2010, p. 18-20

    Research output: Contribution to journalArticleScientific

  50. Published

    Managing high variety products in global value systems

    Pulkkinen, A., Riitahuhta, A., Leino, S-P., Lappeteläinen, I., Heikkilä, M. & Kohtamäki, M., 2010, The 7th International Conference on Product Lifecycle Management, PLM 10, 12-14 July, 2010, BIBA University of Bremen, Germany. Bremen: BIBA-Bremen Institut Für Produktion und Logistik GmbH, p. 13 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  51. Published

    Matkaraportti: Digitaalihydrauliikan seminaari marraskuisessa Linzissä

    Linjama, M., 2010, In : Fluid Finland. 1/2010, p. 12-14

    Research output: Contribution to journalArticleScientific

  52. Published

    Matrix-based conflict resolution algorithm: applicaton to path selection in PN-based scheduling search

    Popescu, C. & Martinez Lastra, J. L., 2010, 15th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA 2010, September 13-16, 2010, Bilbao, Spain. p. 4 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  53. Published

    Measured characteristics of an in-line pump with independently controlled pistons

    Tammisto, J., Huova, M., Heikkilä, M., Linjama, M. & Huhtala, K., 2010, 7th International Fluid Power Conference (7th IFK), 22-24 March 2010, Aachen, Germany. p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  54. Published

    Microfactory concept for highly flexible volume assembly of watch mechanisms

    Järvenpää, E., Heikkilä, R. & Tuokko, R., 2010, Proceedings of the 7th International Workshop on Microfactories, IWMF 2010, 24-27 October, 2010, Daejeon, Korea. p. 9-14

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  55. Published

    Micro H-scara robot: findings and results

    Vuola, A., Siltala, N., Heikkilä, R. & Tuokko, R., 2010, Proceedings of the 7th International Workshop on Microfactories, IWMF 2010, 24-27 October, 2010, Daejeon, Korea. p. 20-24

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  56. Published

    Microstructure and wear resistance of the laser hardened PM tool steel vanadis 6

    Surzhenkov, A., Kulu, P., Viljus, M., Vallikivi, A. & Latokartano, J., 2010, Proceedings of the 7th International Conference of DAAAM Baltic Industrial Engineering, 22-24 April, 2010, Tallinn, Estonia. Kyttner, R. (ed.). Tallinn University of Technology, p. 486-491

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  57. Published

    Miniaturization of flexible screwing cell

    Vuola, A., Heikkilä, R., Prusi, T., Remes, M., Rokka, P., Siltala, N. & Tuokko, R., 2010, Proceedings of 5th IFIP WG 5.5, International Precision Assembly Seminar, IPAS 2010, 14-17 February, 2010, Chamonix, France. Ratchev, S. (ed.). p. 309-316

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  58. Published

    Miniaturized camera systems for microfactories

    Prusi, T., Rokka, P. & Tuokko, R., 2010, Proceedings of 5th IFIP WG 5.5, International Precision Assembly Seminar, IPAS 2010, 14-17 February, 2010, Chamonix, France. Ratchev, S. (ed.). p. 115-122

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  59. Published

    Modeling and identification of a pneumatic muscle actuator system controlled by on/off solenoid valve

    Jouppila, V., Gadsden, A. & Ellman, A., 2010, Proceedings of the 7th International Fluid Power Conference IFK, Aachen, Germany, 22 - 24 March, 2010. p. 1-34 34 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  60. Published

    Modeling coupled hydraulic-driven multibody systems using finite element method

    Mäkinen, J. M. A., Pertola, P. S. & Marjamäki, H. U., 2010, The 1st Joint International Conference on Multibody System Dynamics, May 25-27, 2010, Lappeenranta, Finland. p. 1-10 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  61. Published

    Modeling of closed spare part circulation for better availability of aircraft

    Laitinen, J. & Hagmark, P-E., 2010, Proceedings of the 4th Asia-Pacific International Symposium on Advanced Reliability and Maintenance Modeling APARM 2010, Wellington, New Zealand, 2 - 4 December, 2010. Chukova, S., Haywood, J. & Dohi, T. (eds.). p. 409-416

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  62. Published

    Modelling and robust control of a hydraulic servo system

    Zhai, L., Mattila, J. & Virvalo, T., 2010, Proceedings of the Post-Graduate Workshop on Intelligent Machines and Transport Systems, May 3-7, 2010, CERN, Switzerland. Karvinen, T. & Keskinen, E. (eds.). p. 156-167

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  63. Published

    Modelling of fretting fatigue cracking risk in shrink fit with wavy surfaces

    Immonen, J., Lehtovaara, A. & Lönnqvist, C., 2010, 14th Nordic Symposium on Tribology, Nordtrib 2010, Storforsen, Sweden, Luleå University of Technology. p. 1-8 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  64. Published

    Multi-agent control of reconfigurable pallet transport systems

    Jokinen, J., 2010, Tampere: Tampere University of Technology. (Tampereen teknillinen yliopisto. Julkaisu; vol. 869)

    Research output: Book/ReportDoctoral thesisMonograph

  65. Published

    Multicriterion approach to minimum compliance topology optimization of trusses with comparison to stress-constrained minimum weight design

    Mela, K. & Koski, J., 2010, Advances and Trends in Structural Engineering, Mechanics and Computation. Zingoni, A. (ed.). p. 1081-1084

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  66. Published

    Multiple marine vehicle deconflicted path planning with currents and communication constraints

    Häusler, A., Ghabcheloo, R., Pascoal, M. A. & Aguiar, A. P., 2010, The 7th IFAC Symposium on Intelligent Autonomous Vehicles IAV'10, Lecce, Italy, September 2010. p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  67. Published

    Negative load sensing

    Erkkilä, M., Jalkanen, T., Lehto, E. & Virvalo, T., 2010, 7th International Fluid Power Conference (7th IFK), 22-24 March2010, Aachen, Germany. p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  68. Published

    Neutral interface for assembly and manufacturing related knowledge exchange in heterogeneous design environment

    Lanz, M., Rodriguez, R., Luostarinen, P. & Tuokko, R., 2010, Precision assembly technologies and systems, proceedings of 5th International Precision Assembly Seminar, IPAS 2010, 14-17 February 2010, Chamonix, France. Ratchev, S. (ed.). Springer, p. 21-29

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  69. Published

    Newcomer eSONIA

    Popescu, C. & Thorburn, K., 2010, In : ARTEMIS Magazine. 8, p. 16-17

    Research output: Contribution to journalArticleProfessional

  70. Published

    New digital electrohydraulic valve package

    Uusitalo, J-P., Ahola, V., Söderlund, L. & Kettunen, L., 2010, Proceedings of the Third Workshop on Digital Fluid Power, October 13-14, 2010, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). p. 39-59

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  71. Published

    Non-linear finite element modelling of a test system for a maintenance robot

    Marjamäki, H., Mäkinen, J. & Pertola, P., 2010, Proceedings of The Tenth International Conference on Computational Structures Technology, 14-17 September, 2010, Valencia, Spain. Topping, B. H. V., Adam, J. M., Pallares, F. J., Bru, R. & Romero, M. L. (eds.). p. 1-13 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  72. Published

    Novel approach on application manufacturing using inkjet printing, laser ablation and new polymer substrate

    Kunnari, E., Karttunen, M., Kumpulainen, T., Kortet, S., Laine-Ma, T., Mäntysalo, M., Smalen, M. & Ruuskanen, P., 2010, ICEP2010. International Conference on Electronics Packaging, May 12-14, 2010, Hokkaido, Japan. p. 249-254

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  73. Published

    Novel bistable hammer valve for digital hydraulics

    Uusitalo, J-P., Ahola, V., Söderlund, L., Linjama, M., Juhola, M. & Kettunen, L., 2010, In : International Journal of Fluid Power. 11, 3, p. 35-44

    Research output: Contribution to journalArticleScientificpeer-review

  74. Published

    Numerical modelling of bit-rock interaction in percussive drilling

    Saksala, T., 2010, ECCM 2010, IV European Conference on Computational Mechanics, May 16-21, 2010, Paris, France. p. 1-2 2 p. 2078

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  75. Published

    Numerical modelling of bit-rock interaction in percussive drilling by manifold approach

    Saksala, T. J. & Mäkinen, J. M., 2010, Proceedings of NSCM-23: the 23rd Nordic Seminar on Computational Mechanics NSCM-23, 21-22 October 2010, Stockholm, Sweden. Eriksson, A. & Tibert, G. (eds.). p. 247-250

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  76. Published

    Numerical modelling of rock fracture in percussive drilling

    Saksala, T., 2010, Tampere: Tampere University of Technology. 103 p. (Tampereen teknillinen yliopisto. Julkaisu; vol. 886)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  77. Published

    ON3 - Biohybrid nanocomposite coatings from sonicated chitosan and nanoclay

    Vartiainen, J., Tuominen, M. & Nättinen, K., 2010, 4th Shelf Life International Meeting (SLIM), June 23-25, 2010, Zaragoza, Spain. p. 24-24

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  78. Published

    On computing critical equilibrium points by direct method

    Mäkinen, J., Kouhia, R. & Ylinen, A., 2010, Proceedings of NSCM-23: the 23td Nordic Seminar on Computational Mechanics, NSCM-23, 21-22 October 2010, Stockholm, Sweden. Eriksson, A. & Tibert, G. (eds.). p. 271-274

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  79. Published

    On the flocculation in fiber suspensions

    Putkiranta, M., Marjanen, K., Eloranta, H., Pärssinen, T. & Saarenrinne, P., 2010, 7th International Conference on Multiphase Flow ICMF-2010, May 30 - June 4, 2010 Tampa, Florida. p. 1-8 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  80. Published

    Optimization and energy consumption of electro-hydraulic valve actuation system through valve event timing range

    Herranen, M., Huhtala, K. & Vilenius, M., 2010, Fluid Power and Motion Control (FPMC 2010), 15-17 September 2010, University of Bath, UK. Johnston, D. N. & Plummer, A. (eds.). p. 433-445

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  81. Published

    Optimum geometry of fixed volume plate fin for maximizing heat transfer

    Karvinen, R. & Karvinen, T., 2010, In : International Journal of Heat and Mass Transfer. 53, 23-24, p. 5381-5385

    Research output: Contribution to journalArticleScientificpeer-review

  82. Published

    Prediction of long-term mechanical behavior of glassy polymers

    Holopainen, S. & Wallin, M., 2010, Proceedings of the 23rd Nordic Seminar on Computational Mechanics Stockholm, 21-22 October, 2010. Eriksson, A. & Tibert, G. (eds.). 752: KTH, p. 134-137 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  83. Published

    Prediction of transverse vibrations of thin-wall rolls under grinding process using Timoshenko beam theory

    Dospel, V. & Keskinen, E., 2010, Postgraduate Workshop on Intelligent Machines and Transport Systems, May 3-7, 2010, Cern, Switzerland. Karvinen, T. & Keskinen, E. (eds.). p. 14-26

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  84. Published

    Proceedings of the Third Workshop on Digital Fluid Power, October 13-14 2010, Tampere, Finland

    Laamanen, A. (ed.) & Linjama, M. (ed.), 2010, Tampere: Tampere University of Technology.

    Research output: Book/ReportAnthologyScientificpeer-review

  85. Refining surface and a blade segment for a refiner

    Sjöström, H., Arjanmaa, V., Fröberg, P., Vuorio, P., Virving, N., Huhtanen, J-P. & Kaarineva, M., 2010, Patent No. Pat. EP 1670591 B1, Priority date 7 Apr 2010, Priority No. (21) 04767103.7 (30) SE 0302646

    Research output: PatentScientific

  86. Published

    Reitinvalintaa rastilta seuraavalle

    Huhtala, K., 2010, In : Fluid Finland. 3-4, p. 7-7

    Research output: Contribution to journalArticleScientific

  87. Published

    Research platforms for future activities

    Huhtala, K., 2010, Proceedings of the 3rd GIM Scientific Workshop, February 17-18, 2010, Aalto University School of Science and Technology. Halme, A. & Pirttioja, T. (eds.). p. 1-16 16 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  88. Published

    Robots for micro and desktop factories: examples and experiences

    Prusi, T., Vuola, A., Siltala, N., Heikkilä, R. & Tuokko, R., 2010, Proceedings of the joint conference of the 41st International Symposium on Robotics, ISR 2010, and 6th German Conference on Robotics, ROBOTIK 2010, 7-9 June, 2010, Munich, Germany. p. 1088-1094

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  89. Published

    Safety of interactive robotics - Learning from accidents

    Malm, T., Viitaniemi, J., Latokartano, J., Lind, S., Venho-Ahonen, O. & Schabel, J., 2010, In : International Journal of Social Robotics. 2, 3, p. 221-227

    Research output: Contribution to journalArticleScientificpeer-review

  90. Published

    Set-up and first steps on capturing of realistic resource characteristics of an intelligent manufacturing environment

    Lanz, M., Nylund, H., Ranta, A., Luostarinen, P. & Tuokko, R., 2010, Proceedings of the 20th International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2010, July 12-14, 2010, California State University East Bay, USA. p. 1028-1036

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  91. Published

    Simulation of service-oriented and distributed manufacturing systems

    Nylund, H. & Andersson, P. H., 2010, In : Robotics and Computer-Integrated Manufacturing. 26, 6, p. 622-628

    Research output: Contribution to journalArticleScientificpeer-review

  92. Published

    SISU 2010 - Uusi tuotantoajattelu, Tekes-ohjelman loppuraportti

    Tuokko, R., Majuri, M. & Suuronen, J., 2010, Unknown Publisher. 247 p. (Tekesin ohjelmaraportti; vol. 1/2010)

    Research output: Book/ReportCommissioned reportProfessional

  93. Published

    Standard development of ISO/FDIS 29262

    Siltala, N., 2010, Unknown Publisher. 17 p.

    Research output: Book/ReportBookScientificpeer-review

  94. Published

    Studying the information sources and flows in a company - Support for the development of new intelligent systems

    Järvenpää, E., Lanz, M., Mela, J. & Tuokko, R., 2010, Proceedings of the 20th International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2010, July 12-14, 2010, California State University East Bay, USA. p. 387-394

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  95. Published

    The effects of laser welding on the heterogeneous immunoassay performance in a microfluidic cartridge

    Mäntymaa, A., Halme, J., Välimaa, L. & Kallio, P., 2010, Proceedings of the 2nd European Conference on Microfluidics - Microfluidics 2010, Toulouse, December 8-10, 2010. p. 1-7 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  96. Published

    The energy balance of the electro-hydraulic linear actuation system

    Herranen, M., Huhtala, K. & Vilenius, M., 2010, In : Journal of Energy and Power Engineering. 4, 8, p. 57-63

    Research output: Contribution to journalArticleScientific

  97. Published

    The goals of assessment

    Vanhatalo, M., Lehtonen, T., Juuti, T., Pakkanen, J. & Riitahuhta, A., 2010, Proceedings of The 12th International Conference on Engineering and Product Design Education, When Design Education and Design Research meet..., Norwegian University of Science and Technology, 2-3 September, 2010, Trondheim, Norway. E&PDE2010, p. 6 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  98. Published

    The role of the university centre for continuing engineering education in the creation and implementation of innovation management program

    Siekkinen, R. & Riitahuhta, A., 2010, NordDesign 2010 Conference, 25-27 August, 2010, Göteborg, Sweden. Dagman, A. & Söderberg, R. (eds.). p. 7 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  99. Published

    Tool for concept evaluation based on the properties of the concept and the business environment

    Vanhatalo, M., Lehtonen, T., Pakkanen, J., Juuti, T. & Riitahuhta, A., 2010, Proceeding of 11th International Design Conference DESIGN 2010, 17-20 May, 2010, Dubrovnik, Croatia. p. 965-974

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  100. Published

    Towards automatic reconfiguration planning of changeable assembly systems

    Järvenpää, E. & Tuokko, R., 2010, Proceeding of Post-Graduate Workshop on Intelligent Machines and Transport Systems, 3-7 May 2010, CERN, Switzerland. p. 79-89

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  101. Published

    Valve parameter study in case of digital pump

    Jaurola, M., 2010, Proceedings of the 3rd GIM Scientific Workshop, February 17-18, 2010, Aalto University School of Science and Technology. Halme, A. & Pirttioja, T. (eds.). Espoo, p. 1-13 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Previous 1 2 3 4 5 6 7 8 ...13 Next
Download list To download, please limit the number of search results to 1,000 or less.