Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. 2018
  2. Published

    An experimental investigation of scuffing initiation due to axial displacement in a rolling/sliding contact

    Savolainen, M. & Lehtovaara, A., Mar 2018, In : Tribology International. 119, p. 688-697

    Research output: Contribution to journalArticleScientificpeer-review

  3. Published

    Effect of glass temperature before cooling and cooling rate on residual stresses in tempering

    Aronen, A. & Karvinen, R., Mar 2018, In : Glass Structures Engineering. 3, 1, p. 3-15

    Research output: Contribution to journalArticleScientificpeer-review

  4. Published

    Fault-tolerant control of a multi-outlet digital hydraulic pump-motor

    Heikkilä, M. & Linjama, M., Mar 2018, Fluid power networks: Proceedings of the 11th International Fluid Power Conference, 19th-21st March 2018, Aachen. Murrenhoff, H. (ed.). Aachen University: RWTH Publications, Vol. 1. p. 145-157 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  5. Published

    Koneisiin lisää kestoikää kitkaväsymisen paremmalla hallinnalla

    Juoksukangas, J., Mar 2018, In : Promaint. 1, p. 24-26 3 p.

    Research output: Contribution to journalArticleProfessional

  6. Published

    UV-Blocking Synthetic Biopolymer from Biomass-Based Bifuran Diester and Ethylene Glycol

    Kainulainen, T. P., Sirviö, J. A., Sethi, J., Hukka, T. I. & Heiskanen, J. P., 21 Feb 2018, In : Macromolecules. 51, 5, p. 1822-1829 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  7. Published

    Formal resource and capability models supporting re-use of manufacturing resources

    Järvenpää, E., Lanz, M. & Siltala, N., Feb 2018, In : Procedia Manufacturing. 19, p. 87-94 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  8. Published

    An open modelling approach for availability and reliability of systems - OpenMARS

    Penttinen, J-P., Niemi, A. & Gutleber, J., 30 Jan 2018, 47 p. EUROPEAN ORGANIZATION FOR NUCLEAR RESEARCH, CERN.

    Research output: Other contributionScientific

  9. Published

    Model-based force and position tracking control of a multi-pressure hydraulic cylinder

    Linjama, M. & Huova, M., Jan 2018, In : Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering. 232, 3, p. 324-335

    Research output: Contribution to journalArticleScientificpeer-review

  10. Published

    An approach to investigating subsurface fatigue in a rolling/sliding contact

    Savolainen, M. & Lehtovaara, A., 2018, In : International Journal of Fatigue. 117, p. 180-188

    Research output: Contribution to journalArticleScientificpeer-review

  11. Published

    Comparison of in-vivo digital image correlation and tissue doppler analyses of right ventricle strains

    Soltani, A., Lahti, J., Curtze, S., Laurikka, J., Hokka, M. & Kuokkala, V-T., 2018.

    Research output: Other conference contributionPaper, poster or abstractScientific

  12. Published

    Conjugated Heat Transfer Simulation of a Fin-and-Tube Heat Exchanger

    Välikangas, T. & Karvinen, R., 2018, In : Heat Transfer Engineering. 39, 13-14, p. 1192-1200 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  13. Published

    Digital image correlation study of the deformation and functioning of the human heart during open-heart surgery

    Soltani, A., Curtze, S., Lahti, J., Järvelä, K., Laurikka, J., Hokka, M. & Kuokkala, V. T., 2018, Mechanics of Biological Systems, Materials and other topics in Experimental and Applied Mechanics - Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics. Springer New York LLC, Vol. 4. p. 19-27 9 p. (Conference Proceedings of the Society for Experimental Mechanics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  14. Published

    Effects of adiabatic heating estimated from tensile tests with continuous heating

    Vazquez Fernandez, N., Isakov, M., Hokka, M. & Kuokkala, V. T., 2018, Dynamic Behavior of Materials - Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics. Springer New York LLC, Vol. 1. p. 1-7 7 p. (Conference Proceedings of the Society for Experimental Mechanics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  15. Published

    Filtering scheme for context-aware fog computing in cyber-physical systems

    Mononen, T., M. Aref, M. & Mattila, J., 2018, 14th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications (MESA): 2-4 July 2018, Oulu.. Oulu: IEEE, 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  16. Published

    High-Linear Digital Hydraulic Valve Control by an Equal Coded Valve System and Novel Switching Schemes

    Paloniitty, M. & Linjama, M., 2018, In : Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering. 232, 3, p. 258-269

    Research output: Contribution to journalArticleScientificpeer-review

  17. Published

    In-vivo optical strain measurements of the human heart

    Soltani, A., Lahti, J., Curtze, S., Järvelä, K., Laurikka, J., Hokka, M. & Kuokkala, V-T., 2018.

    Research output: Other conference contributionPaper, poster or abstractScientific

  18. Published

    IoT-Based senses for Virtual Enterprises

    Mahmoodpour, M., Mahmood, K. & Lobov, A., 2018, IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society : 21-23 Oct. 2018, D.C., DC, USA. IEEE, p. 4181-4186 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  19. Published

    Knowledge-based artificial neural network (KB-ANN) in engineering: Associating functional architecture modeling, dimensional analysis and causal graphs to produce optimized topologies for KB-ANNs

    Coatanéa, E., Wu, D., Tsarkov, V., Gary Wang, G., Modi, S. & Jafarian, H., 2018, 38th Computers and Information in Engineering Conference. The American Society of Mechanical Engineers ASME, Vol. 1B-2018. 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  20. Published

    Knowledge-based optimization of artificial neural network topology for process modeling of fused deposition modeling

    Nagarajan, H., Jafarian, H., Hamedi, A., Mokhtarian, H., Prod'hon, R., Tilouche, S., Coatanea, E. & Nenchev, V., 2018, Proceedings of the ASME 2018 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2018): Volume 4: 23rd Design for Manufacturing and the Life Cycle Conference; 12th International Conference on Micro- and Nanosystems. Aug. 26-29, 2018, Quebec City, Canada.. ASME International, Vol. 4. 12 p. DETC2018-86187

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  21. Published

    Lateral indentation and impact analyses on curved composite shells

    Di Vito, D., Pärnänen, T., Jokinen, J., Orell, O. & Kanerva, M., 2018, Proceedings of the 7th International Conference on Fracture Fatigue and Wear: FFW 2018, 9-10 July 2018, Ghent University, Belgium. Wahab, M. A. (ed.). Springer Singapore, p. 171-183 13 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  22. Published

    Learning experiences involving digital twins

    David, J., Lobov, A. & Lanz, M., 2018, IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society : 21-23 Oct. 2018, D.C., DC, USA. IEEE, p. 3681-3686 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  23. Published

    Leveraging digital twins for assisted learning of flexible manufacturing systems

    David, J., Lobov, A. & Lanz, M., 2018, 2018 IEEE 16th International Conference on Industrial Informatics (INDIN): Porto, Portugal, July 18-20, 2018. IEEE

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  24. Published

    Mechanical subsystems integration and structural analysis for the autonomous underwater explorer

    Villa, J., Heininen, A., Zavari, S., Salomaa, T., Usenius, O., Laitinen, J., Aaltonen, J. & Koskinen, K. T., 2018, 2018 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS). IEEE, p. 1488-1493

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  25. Published

    Method to determine internal leakage of aircraft's hydraulic servo

    Laitinen, J. & Koskinen, K., 2018, 12th World Congress on Engineering Asset Management & 13th International Conference on Vibration Engineering and Technology of Machinery: (WCEAM 2017) 2-4, August 2017, Brisbane, Australia.. Mathew, J., Lim, C. W., Ma, L., Sands, D., Cholette, M. E. & Borghesani, P. (eds.). Springer, p. 343-349 7 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  26. Published

    Micro Manufacturing Unit and the Corresponding 3D-Model for the Digital Twin

    Lohtander, M., Garcia, E., Lanz, M., Volotinen, J., Ratava, J. & Kaakkunen, J., 2018, In : Procedia Manufacturing. 17, p. 55-61

    Research output: Contribution to journalArticleScientificpeer-review

  27. Published

    Robomestarit: TV2 Lasten ja nuorten robotiikka gameshow

    Latokartano, J., 2018

    Research output: Artistic and non-textual formDigital or Visual ProductsScientific

  28. Published

    Smart manufacturing systems: climbing the DIKW pyramid

    Lobov, A., 2018, IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society : 21-23 Oct. 2018, D.C., DC, USA. IEEE, p. 4730-4735 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  29. Published

    Special Issue on ‘New Hydraulic Components for Tough Robots’

    Suzumori, K. (ed.), Hyon, S. H. (ed.), Semini, C. (ed.), Mattila, J. (ed.) & Kanda, T. (ed.), 2018, In : Advanced Robotics.

    Research output: Contribution to journalSpecial issueScientificpeer-review

  30. 2017
  31. Published

    Landowners’ willingness to promote bioenergy production on wasteland − future impact on land use of cutaway peatlands

    Laasasenaho, K., Lensu, A., Rintala, J. & Lauhanen, R., 1 Dec 2017, In : Land Use Policy. 69, p. 167-175 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  32. Published

    Big data analytics for the Future Circular Collider reliability and availability studies

    Begy, V., Apollonio, A., Gutleber, J., Martin-Marquez, M., Niemi, A., Penttinen, J-P., Rogova, E., Romero-Marin, A. & Sollander, P., 23 Nov 2017, 22nd International Conference on Computing in High Energy and Nuclear Physics (CHEP2016). IOP Publishing, ( Journal of Physics: Conference Series; vol. 898).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  33. Published

    Image based analysis and modelling of Norway spruce compression

    Moilanen, C., 15 Nov 2017, Tampere University of Technology. 56 p. (Tampere University of Technology. Publication; vol. 1505)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  34. Published

    Proceedings of the 2nd Annual SMACC Research Seminar 2017

    Aaltonen, J., Koskinen, K., Virkkunen, R. & Kuivanen, R., 7 Nov 2017, Tampere: Tampere University of Technology. 62 p.

    Research output: Book/ReportAnthologyScientificpeer-review

  35. Published

    Automated control system for indoor air quality management

    Aslam, Z., Khalid, W., Ahmed, T. & Marghoob, D., 1 Nov 2017, 2017 International Conference on Energy Conservation and Efficiency (ICECE). IEEE, p. 85-88 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  36. Published

    A Miniature On/Off Valve Concept for High Performance Water Hydraulics

    Paloniitty, M. & Linjama, M., 19 Oct 2017, ASME/BATH 2017 Symposium on Fluid Power and Motion Control. ASME, 8 p. FPMC2017-4254

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  37. Published

    Hydraulic Damper Concept for Thruster Ice Impact Load Reduction

    Siivonen, L. & Huhtala, K., 19 Oct 2017, ASME/BATH 2017 Symposium on Fluid Power and Motion Control. Sarasota, FL, USA: ASME, 10 p. FPMC2017-4238

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  38. Published

    Pirkanmaan kiertotalouden innovaatiotoiminnan nykytila

    Halonen, E., Alakerttula, J., Lanz, M. & Seppänen, M., 9 Oct 2017, Pirkanmaan liitto. 41 p.

    Research output: Book/ReportBookGeneral public

  39. Published

    Simulating the Drag Coefficient of a Spherical Autonomous Underwater Vehicle

    Heininen, A., Aaltonen, J. & Koskinen, K. T., 9 Oct 2017, Proceedings of the 2nd Annual SMACC Research Seminar 2017. Aaltonen, J., Virkkunen, R., Koskinen, K. T. & Kuivanen, R. (eds.). Tampere: Tampere University of Technology, Vol. 2. p. 53-56 4 p. 14

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  40. Published

    Adaptive and nonlinear control of discharge pressure for variable displacement axial piston pumps

    Koivumäki, J. & Mattila, J., 1 Oct 2017, In : Journal of Dynamic Systems, Measurement and Control: Transactions of the ASME. 139, 10, 101008.

    Research output: Contribution to journalArticleScientificpeer-review

  41. Published

    Effect of natural convection and radiation inside of a hollow beam in a standard fire

    Välikangas, T., Pajunen, S., Baczkiewicz, J., Singh, S. & Sørensen, K., 27 Sep 2017, Proceedings of the 58th Conference on Simulation and Modelling (SIMS 58) Reykjavik, Iceland, September 25th – 27th, 2017. Jonsson, M. T. (ed.). Linköping: Linköping University Electronic Press, Vol. 138. p. 121-127 7 p. 16. (Linköping Electronic Conference Proceedings; no. 138).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  42. Published

    IDDRG 2017 konferenssi Munchenissä - Materials Modelling for Sheet Metal Forming

    Peura, P., 20 Sep 2017, In : Ohutlevy-lehti. 2, p. 7-9 3 p.

    Research output: Contribution to journalArticleProfessional

  43. Published

    Modelling Capabilities for Functional Configuration of Part Feeding Equipment

    Hansson, M. N., Järvenpää, E., Siltala, N. & Madsen, O., 18 Sep 2017, In : Procedia Manufacturing. 11, p. 2051-2060 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  44. Published

    Transforming ETO Businesses with Enhanced PLM Capabilities

    Pulkkinen, A., Leino, S-P. & Papinniemi, J., 18 Sep 2017, In : Procedia Manufacturing. 2017, 11C, p. 1642-1650 8 p., PROMFG27700.

    Research output: Contribution to journalArticleScientificpeer-review

  45. Published

    Capability Matchmaking Procedure to Support Rapid Configuration and Re-configuration of Production Systems

    Järvenpää, E., Siltala, N., Hylli, O. & Lanz, M., Sep 2017, In : Procedia Manufacturing. 11, p. 1053-1060 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  46. Published

    Feed-hopper level estimation and control in cone crushers

    Itävuo, P., Hulthén, E. & Vilkko, M., 15 Aug 2017, In : Minerals Engineering. 110, p. 82-95 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  47. Published

    Engineering design analysis tool for early design phase with low-fidelity models – a case of hydraulic crane

    Ellman, A., Pajunen, S., Laine, I. & Coatanea, E., 6 Aug 2017, ASME 2017 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference: Volume 1: 37th Computers and Information in Engineering Conference, August 6-9, 2017, Cleveland, Ohio, USA.. American Society of Mechanical Engineers(ASME), 10 p. DECT2017-67493

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  48. Published

    Dynamics of a True Moving Bed separation process: Linear model identification and advanced process control

    Nogueira, I. B. R., Ribeiro, A. M., Martins, M. A. F., Rodrigues, A. E., Koivisto, H. & Loureiro, J. M., 30 Jun 2017, In : Journal of Chromatography A. 1504

    Research output: Contribution to journalArticleScientificpeer-review

  49. Published

    Influence of strain rate, temperature and fatigue on the radial compression behaviour of Norway spruce

    Moilanen, C., Björkqvist, T., Ovaska, M., Koivisto, J., Miksic, A., Engberg, B. A., Salminen, L. I., Saarenrinne, P. & Alava, M., 27 Jun 2017, In : Holzforschung. 71, 6, p. 505-514 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  50. Published

    Emission reduction of mobile machines by hydraulic hybrid

    Tikkanen, S., Koskela, E., Ahola, V. & Huhtala, K., 8 Jun 2017, The 15th Scandinavian International Conference on Fluid Power. Linköping: Linköping University Electronic Press, p. 62-67 (Linköping Electronic Conference Proceedings).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  51. Published

    Study of Energy Losses in Digital Hydraulic Multi-Pressure Actuator

    Huova, M., Aalto, A., Linjama, M. & Huhtala, K., 8 Jun 2017, The 15th Scandinavian International Conference on Fluid Power, SICFP’17, June 7-9, 2017, Linköping, Sweden. Linköping University Electronic Press, p. 214-223 (Linköping Electronic Conference Proceedings).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  52. Published

    Simulation study of a digital hydraulic independent metering valve system on an excavator

    Ketonen, M. & Linjama, M., 7 Jun 2017, The 15th Scandinavian International Conference on Fluid Power. Linköping University Electronic Press, p. 136-146 (Linköping Electronic Conference Proceedings).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  53. Published

    Modelling and Experimental Analysis of Fretting Fatigue in Complete and Bolted Contacts

    Juoksukangas, J., 24 May 2017, Tampere University of Technology. 58 p. (Tampere University of Technology. Publication; vol. 1472)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  54. Published

    Concepts, methods and tools for individualized production

    Lanz, M. & Tuokko, R., 1 Apr 2017, In : PRODUCTION ENGINEERING. 11, 2, p. 205-212 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  55. Published

    Guest editorial introduction to the focused section on design and control of hydraulic robots

    Mattila, J., Semini, C., Moon, H., Buchli, J., Hyon, S., Li, P. Y. & Yao, B., 1 Apr 2017, In : IEEE - ASME Transactions on Mechatronics. 22, 2, p. 585-588 4 p.

    Research output: Contribution to journalEditorialScientific

  56. Published

    Conjugated heat transfer from a uniformly heated plate and a plate fin with uniform base heat flux

    Lindstedt, M. & Karvinen, R., Apr 2017, In : International Journal of Heat and Mass Transfer. 107, p. 89-95 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  57. Published

    Continuum approach for modeling fatigue in amorphous glassy polymers. Applications to the investigation of damage-ratcheting interaction in polycarbonate

    Holopainen, S., Barriere, T., Cheng, G. & Kouhia, R., Apr 2017, In : International Journal of Plasticity. 91, p. 109-133 24 p.

    Research output: Contribution to journalArticleScientificpeer-review

  58. Published

    Structured ZnO films: Effect of copper nitrate addition to precursor solution on topography, band gap energy and photocatalytic activity

    Heinonen, S., Nikkanen, J. P., Kaleva, A., Hyvärinen, L. & Levänen, E., 15 Feb 2017, In : IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING. 175, 1, 012042.

    Research output: Contribution to journalArticleScientificpeer-review

  59. Published

    Synchronous Full-Field Strain and Temperature Measurement in Tensile Tests at Low, Intermediate and High Strain Rates

    Seidt, J. D., Kuokkala, V-T., Smith, J. L. & Gilat, A., Feb 2017, In : Experimental Mechanics. 57, 2, p. 219–229

    Research output: Contribution to journalArticleScientificpeer-review

  60. Published

    Experimental and numerical study of a drill bit drop tests on Kuru Granite

    Fourmeau, M., Kane, A. & Hokka, M., Jan 2017, In : Philosophical Transactions of the Royal Society A: Mathematical Physical and Engineering Sciences. 375, 2085

    Research output: Contribution to journalArticleScientificpeer-review

  61. Published

    Gain scheduled state feedback velocity control of hydrostatic drive transmissions

    Backas, J., Ghabcheloo, R. & Huhtala, K., Jan 2017, In : Control Engineering Practice. 58, p. 214-224

    Research output: Contribution to journalArticleScientificpeer-review

  62. Published

    Global energy-optimised redundancy resolution in hydraulic manipulators using dynamic programming

    Nurmi, J. & Mattila, J., Jan 2017, In : Automation in Construction. 73, January 2017, p. 120-134 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  63. Published

    Association of exercise loading history with fall-induced hip fracture risk.

    Abe, S., Narra, N., Nikander, R., Hyttinen, J., Kouhia, R. & Sievänen, H., 2017.

    Research output: Other conference contributionPaper, poster or abstractScientific

  64. Published

    Automated high-throughput microbond tester for interfacial shear strength studies

    von Essen, M., Sarlin, E., Tanhuanpää, O., Kakkonen, M. M. S., Laurikainen, P., Hoikkanen, M., Haakana, R., Vuorinen, J. & Kallio, P., 2017, Proceedings of SAMPE Conference 17 Stuttgart. SAMPE Europe, 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  65. Published

    Autonomous and collaborative offshore robotics

    Villa Escusol, J., Aaltonen, J. & Koskinen, K., 2017, Proceedings of the 2nd Annual SMACC Research Seminar 2017. Tampere University of Technology, p. 57-59 3 p. 15

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  66. Published

    Collaborative Systems and Environments for Future Working Life: Towards the Integration of Workers, Systems and Manufacturing Environments

    Hämäläinen, R., Lanz, M. & Koskinen, K. T., 2017, The Impact of Digitalization in the Workplace: An Educational View. Springer, p. 25-38 13 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  67. Published

    Complex elevator system DSM-case for a DSM design sprint

    Niutanen, V., Hölttä-Otto, K., Rahardjo, A., Stowe, H. M., Helo, P. & Pulkkinen, A., 2017, Understand, Innovate, and Manage your Complex System! - Proceedings of the 19th International DSM Conference. The Design Society, p. 259-264 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  68. Published

    Comportamiento Dinámico en Tracción a Alta Temperatura De Titanio Ensayado Por Dos Métodos Distintos

    Hueto, F., Sancho, R., Hokka, M. & Galvez, F., 2017, Grupo Español de Fractura.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  69. Published

    Digital Image Correlation as a Measurement Tool for Heart Surgery

    Hokka, M., 2017, Proceedings of the Annual Meeting of the International Digital Image Correlation Society, Barcelona.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  70. Published

    Dimension reduction and decomposition using causal graph and qualitative analysis for aircraft concept design optimization

    Wu, D., Coatanea, E. & Wang, G. G., 2017, 43rd Design Automation Conference. The American Society of Mechanical Engineers ASME

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  71. Published

    Dynamic Fracture and Fragmentation of Heat Shocked Granites

    Hokka, M., Mardoukhi, A. & Kuokkala, V-T., 2017, 14th International conference of Fracture: Proceedings of ICF 14. Rhodes, Greece

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  72. Published

    Effect of humidity on triboelectric charging in a vertically vibrated granular bed: Experiments and modeling

    Kolehmainen, J., Sippola, P., Raitanen, O., Ozel, A., Boyce, C. M., Saarenrinne, P. & Sundaresan, S., 2017, In : Chemical Engineering Science. 173, p. 363-373 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  73. Published

    Engineering Change Management Data Analysis from the Perspective of Information Quality

    Jokinen, L., Vainio, V. & Pulkkinen, A., 2017, In : Procedia Manufacturing. 11, p. 1626-1633 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  74. Published

    Fatigue Lifetime Estimation of Machine Component Using Accelerated Testing

    Hietala, J-P., Ojala, P., Multanen, P., Miettinen, J. & Saarenrinne, P., 2017, ESREL 2017. CRC Press

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  75. Published

    Functional Hierarchy in Autonomous Robot

    Zavari, S., Salomaa, T., Villa Escusol, J., Aaltonen, J. & Koskinen, K., 2017, Proceedings of the 2nd Annual SMACC reserch Seminar 2017. Tampere University of Technology, p. 60-62 3 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  76. Published

    Function modeling combined with physics-based reasoning for assessing design options and supporting innovative ideation

    Mokhtarian, H., Coatanea, E. & Paris, H., 2017, In : AI EDAM - Artificial Intelligence for Engineering Design Analysis and Manufacturing. 31, 4, p. 476-500 25 p.

    Research output: Contribution to journalArticleScientificpeer-review

  77. Published

    Heat Transfer of Impinging Jet: Effect of Compressibility and Turbulent Kinetic Energy Production

    Mikkonen, A. & Karvinen, R., 2017, IX International Conference on Computational Heat and Mass Transfer (ICCHMT 2016) .

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  78. Published

    Identification of fundamental requirements for ideal metamodeling framework in additive manufacturing

    Mokhtarian, H., Coatanea, E., Paris, H. & Vihinen, J., 2017, Proceedings of the 2nd Annual SMACC Research Seminar 2017. Aaltonen, J., Virkkunen, R., Koskinen, K. T. & Kuivanen, R. (eds.). p. 29-31 3 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  79. Published

    Influence of exercise history on fall-induced hip fracture risk.

    Abe, S., Narra, N., Nikander, R., Hyttinen, J., Kouhia, R. & Sievänen, H., 2017, Proceeding of the 35th International Conference on Biomechanics in Sports: German Sport University Colgne, Cologne, Germany, June 14-18, 2017. Potthast, W., Niehoff, A. & David, S. (eds.). Vol. 1. p. 464-467 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  80. Published

    Joint-Space Kinematic Model for Gravity-Referenced Joint Angle Estimation of Heavy-Duty Manipulators

    Vihonen, J., Mattila, J. & Visa, A., 2017, In : IEEE Transactions on Instrumentation and Measurement. 66, 12, p. 3280-3288

    Research output: Contribution to journalArticleScientificpeer-review

  81. Published

    Mechatronic Architecture Development of UX-1

    Zavari, S., Usenius, O., Salomaa, T., Villa Escusol, J., Heininen, A., Aaltonen, J. & Koskinen, K., 2017, ICCAS 2017 Proceedings. Institute of Control, Robotics and Systems, p. 1-5 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  82. Published

    Optimization of convectively cooled heat sinks

    Lampio, K. & Karvinen, R., 2017, In : Microelectronics Reliability. 79, p. 473-479

    Research output: Contribution to journalArticleScientificpeer-review

  83. Published

    Role of VR throughout the life of low volume products towards digital extended enterprises

    Leino, S-P., Pulkkinen, A. & Anttila, J. P., 2017, Product Lifecycle Management and the Industry of the Future - 14th IFIP WG 5.1 International Conference, PLM 2017, Revised Selected Papers. Springer New York LLC, p. 404-415 12 p. (IFIP Advances in Information and Communication Technology; vol. 517).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  84. Published

    Structures and properties of laser-assisted cold-sprayed aluminum coatings

    Koivuluoto, H., Milanti, A., Bolelli, G., Latokartano, J., Marra, F., Pulci, G., Vihinen, J., Lusvarghi, L. & Vuoristo, P., 2017, THERMEC 2016. Trans Tech Publications Ltd, Vol. 879. p. 984-989 6 p. (Materials Science Forum; vol. 879).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  85. Published

    Suomalaiset ambulanssit

    Lehtonen, T., 2017, Suomi turvassa 100 vuotta. Mobilia säätiö, p. 36-45 10 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

  86. Published

    Suomen linja-autot - koriteollisuus 2000-luvulla

    Lehtonen, T., 2017, Kustantaja Laaksonen. 192 p.

    Research output: Book/ReportBookProfessional

  87. Published

    Transient load simulation of forwarder rear frame

    Sormunen, J., 2017, In : Rakenteiden mekaniikka. 50, 2, p. 77-96 20 p.

    Research output: Contribution to journalArticleScientificpeer-review

  88. 2016
  89. Published

    Predicting operator's cognitive and motion skills from joystick inputs

    Laurikkala, M., Suzuki, S. & Vilkko, M., 22 Dec 2016, IECON 2016 - 42nd Annual Conference of the IEEE Industrial Electronics Society. IEEE, p. 5935-5940 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  90. Published

    Interaction of Bootstrap Reservoir and Hydraulic Pump in Aircraft Hydraulic Systems

    Aaltonen, J., 20 Dec 2016, Tampere University of Technology. 106 p. (Tampere University of Technology. Publication; vol. 1448)

    Research output: Book/ReportDoctoral thesisMonograph

  91. Published

    Early stage design of a spherical underwater robotic vehicle

    Zavari, S., Heininen, A., Aaltonen, J. & Koskinen, K. T., 19 Dec 2016, 2016 20th International Conference on System Theory, Control and Computing (ICSTCC). IEEE, p. 240-244 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  92. Published

    Muodonmuutoksen mitat kontinuumimekaniikassa

    Hartikainen, J., Kouhia, R., Mikkola, M. & Mäkinen, J., 9 Dec 2016, In : Rakenteiden mekaniikka. 49, 2, p. 86-99 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  93. Published

    On optimisation of structures under stability constraints - a simple example

    Kouhia, R., Pajunen, S. & Poutala, J., 9 Dec 2016, In : Rakenteiden mekaniikka. 49, 2, p. 69-77 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  94. Published

    Stability-Guaranteed Nonlinear Model-Based Control of Hydraulic Robotic Manipulators

    Koivumäki, J., 2 Dec 2016, Tampere University of Technology. 71 p. (Tampere University of Technology. Publication; vol. 1446)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  95. Published

    Optimal control of pump rotational speed in filling and emptying a reservoir: minimum energy consumption with fixed time

    Lindstedt, M. & Karvinen, R., Dec 2016, In : Energy Efficiency. 9, 6, p. 1461–1474 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  96. Published

    Vision-Guided Autonomous Forklift

    M. Aref, M., Ghabcheloo, R., Kolu, A. & Mattila, J., 29 Nov 2016, Proceedings of the 25th Conference on Robotics in Alpe-Adria-Danube Region (RAAD). Rodić, A. & Borangiu, T. (eds.). Springer International Publishing, p. 338-346 8 p. (Advances in Intelligent Systems and Computing; vol. 540).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  97. Published

    Multi-Objective Optimization of Fin Array Heat Sinks

    Lampio, K. & Karvinen, R., 21 Nov 2016, Therminic 2016: 22nd international workshop Thermal investigations of ICs and Systems. IEEE, 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  98. Published

    Unsteady laminar boundary layers of rainbow trout swimming in turbulent flows

    Yanase, K. & Saarenrinne, P., 8 Nov 2016, In : Biology Open. 33 p.

    Research output: Contribution to journalArticleScientificpeer-review

  99. Published

    Industrial monitoring and control approach for dynamic and distributed intelligent systems

    Jokinen, J. & Martinez Lastra, J. L., 7 Nov 2016, 2016 IEEE 21st International Conference on Emerging Technologies and Factory Automation (ETFA). IEEE, (IEEE Emerging Technologies and Factory Automation).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  100. Published

    Continuum approach for modelling transversely isotropic high-cycle fatigue

    Holopainen, S., Kouhia, R. & Saksala, T., 1 Nov 2016, In : EUROPEAN JOURNAL OF MECHANICS A: SOLIDS. 60, p. 183-195

    Research output: Contribution to journalArticleScientificpeer-review

  101. Published

    Persistent Business Transformation with Product Knowledge and Lifecycle Management

    Pulkkinen, A. (ed.), Leino, S-P. (ed.) & Papinniemi, J. (ed.), Nov 2016, DIMECC MANU – Future Digital Manufacturing Final Report. Syrjälä, K. (ed.). 2016 ed. Tampere: Teknologiainfo Teknova, Vol. 10. (Dimecc Publications Series).

    Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

  102. Published

    Stability-Guaranteed Multiple Cartesian Degrees of Freedom Variable Impedance Control of Hydraulic Manipulators

    Koivumäki, J. & Mattila, J., 27 Oct 2016, 9th FPNI Ph.D. Symposium on Fluid Power. ASME, 10 p. FPNI2016-1565

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  103. Published

    Development of process for adaptive lifetime estimation of mechanical assemblies using accelerated testing methods

    Hietala, J-P., Ojala, P., Multanen, P., Miettinen, J. & Saarenrinne, P., 26 Oct 2016, Risk, Reliability and Safety: Innovating Theory and Practice : Proceedings of the 26th European Safety and Reliability Conference, ESREL 2016, Glasgow, Scotland, 25-29 September 2016. Walls, L., Revie, M. & Bedford, T. (eds.). CRC Press; Taylor & Francis, 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Previous 1 2 3 4 5 6 7 8 ...13 Next
Download list To download, please limit the number of search results to 1,000 or less.