Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. 2019
  2. Published

    Path-Following Controller for 4WDs Hydraulic Heavy-Duty Field Robots with Nonlinear Internal Dynamics

    Liikanen, H., Aref, M. M., Oftadeh, R. & Mattila, J., 2019, In : IFAC-PapersOnLine. 52, 8, p. 375 - 380

    Research output: Contribution to journalArticleScientificpeer-review

  3. Published

    Plant-wide optimization of a copper smelter: How to do it in practice?

    Korpi, M., Jansson, J., Pihlasalo, J., Suominen, O. & Vilkko, M., 2019, Proceedings of the 10th European Metallurgical Conference, EMC 2019. GDMB Verlag GmbH, Vol. 1. p. 95-106 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  4. Published

    Professor Bengt Sundén on his 70th Birthday

    Faghri, M., Amano, R., Cheng, P., Chiu, W., Djilali, N., Ekkad, S., Farhanieh, B., Han, J-C., Jaluria, Y., Kabelac, S., Kakac, S., Karayiannis, T., Karvinen, R., Lewis, R., Manca, O., Menguc, P., Minkowycz, W. J., Muley, A., Murray, D., Olsson, C-O., Szmyd, J., Tao, W., Wang, L., Wang, Q., Wei, J., Wu, Z., Xie, G., Xuan, Y., Yuan, J. & Zhao, T., 2019, In : International Journal of Heat and Mass Transfer. 141, p. 1315-1317 3 p.

    Research output: Contribution to journalArticleScientific

  5. Published

    Running-in effects on friction of journal bearings under slow sliding speeds

    Linjamaa, A., Lehtovaara, A., Kallio, M. & Léger, A., 2019, In : Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology.

    Research output: Contribution to journalArticleScientificpeer-review

  6. Published

    The comfort zone concept in a human-robot cooperative task

    Changizi, A. & Lanz, M., 2019, Precision Assembly in the Digital Age - 8th IFIP WG 5.5 International Precision Assembly Seminar, IPAS 2018, Revised Selected Papers. Springer New York LLC, Vol. 530. p. 82-91 10 p. (IFIP Advances in Information and Communication Technology; vol. 530).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  7. Published

    Variable speed drive with hydraulic boost

    Linjama, M., 2019, In : International Journal of Fluid Power. 20, 1, p. 99-123 25 p.

    Research output: Contribution to journalArticleScientificpeer-review

  8. Published

    Why social sustainability counts: The impact of corporate social sustainability culture on financial success

    Schönborn, G., Berlin, C., Pinzone, M., Hanisch, C., Georgoulias, K. & Lanz, M., 1 Jan 2019, In : Sustainable Production and Consumption. 17, p. 1-10 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  9. Published

    Knowledge-based optimization of artificial neural network topology for additive manufacturing process modeling: a case study for fused deposition modeling: A new approach and case study for fused deposition modeling

    Nagarajan, H. P. N., Mokhtarian, H., Jafarian, H., Dimassi, S., Bakrani Balani, S., Hamedi, A., Coatanea, E., Wang, G. G. & Kari R., H., Feb 2019, In : Journal of Mechanical Design. 141, 2

    Research output: Contribution to journalArticleScientificpeer-review

  10. Published

    The development of an ontology for describing the capabilities of manufacturing resources

    Järvenpää, E., Siltala, N., Hylli, O. & Lanz, M., Feb 2019, In : Journal of Intelligent Manufacturing. 30, 2, p. 959-978 20 p.

    Research output: Contribution to journalArticleScientificpeer-review

  11. Published

    A novel method of vibration modes selection for improving accuracy of frequency-based damage detection

    Pan, J., Zhang, Z., Wu, J., Ramakrishnan, K. & Singh, H. K., 15 Feb 2019, In : Composites Part B : Engineering. 159, p. 437-446 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  12. Published

    Digital hydraulic multi-pressure actuators - simulation study of a forwarder crane

    Heikkilä, M., Huova, M. & Linjama, M., 28 Feb 2019, The 10th Workshop on Digital Fluid Power : February 28th - March 1st, 2019, Linz, Austria. Linz Center of Mechatronics, 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  13. Published

    Switching control of a water hydraulic cylinder with slow parallel-connected on/off valves

    Linjama, M., Grönholm, J. & Paloniitty, M., 28 Feb 2019, The 10th Workshop on Digital Fluid Power : February 28th-March 1st, 2019, Linz, Austria. Linz Center of Mechatronics, 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  14. Published

    An open modelling approach for availability and reliability of systems

    Penttinen, J-P., Niemi, A., Gutleber, J., Koskinen, K., Coatanea, E. & Laitinen, J., Mar 2019, In : Reliability Engineering and System Safety. 183, p. 387-399 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  15. Published

    Nonlinear model predictive energy management of hydrostatic drive transmissions

    Backas, J. & Ghabcheloo, R., 1 Mar 2019, In : Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering. 233, 3, p. 335-347

    Research output: Contribution to journalArticleScientificpeer-review

  16. Published

    Product-Process Integrated Meta-Modeling Using a Graph-Based Approach: Application to Additive Manufacturing

    Mokhtarian, H., 27 Mar 2019, Tampere University. 154 p. (Tampere University Dissertations; vol. 36)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  17. Published

    Employing Knowledge on Causal Relationship to Assist Multidisciplinary Design Optimization

    Wu, D., Coatanea, E. & Wang, G. G., Apr 2019, In : Journal of Mechanical Design, Transactions of the ASME. 141, 4, 041402.

    Research output: Contribution to journalArticleScientificpeer-review

  18. Published

    Modeling Future Hadron Colliders’ Availability for Physics

    Niemi, A., 17 Apr 2019, Tampere University. 130 p. (Tampere University Dissertations; vol. 48)

    Research output: Book/ReportDoctoral thesisMonograph

  19. Published

    Mass balance control of crushing circuits

    Itävuo, P., Hulthén, E., Yahyaei, M. & Vilkko, M., May 2019, In : Minerals Engineering. 135, p. 37-47 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  20. Published

    Improving tracking performance of composite nonlinear feedback controllers via new reset and hold feature of nonlinear functions

    Pyrhönen, V-P. & Vilkko, M., 15 May 2019, Automaatiopäivät 23: 15-16.5.2019 Oulu.. Juuso, E. (ed.). Oulu: Suomen Automaatioseura, 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  21. Published

    Robust and perfect tracking control of a DC servo motor

    Pyrhönen, V-P., 15 May 2019, Automaatiopäivät 23: 15-16.5.2019, Oulu. Juuso, E. (ed.). Oulu: Suomen Automaatioseura

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  22. Published

    Autonomous Area Clearing with a Robotic Wheel Loader

    Halbach, E., 27 May 2019, 15th Symposium on Advanced Space Technologies in Robotics and Automation (ASTRA). Noordwijk, The Netherlands: European Space Agency, 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  23. Published

    Adiabatic Heating of Austenitic Stainless Steels at Different Strain Rates

    Vazquez-Fernandez, N. I., Soares, G. C., Smith, J. L., Seidt, J. D., Isakov, M., Gilat, A., Kuokkala, V. T. & Hokka, M., 20 Jun 2019, In : Journal of Dynamic Behavior of Materials. 5, 3, p. 221-229 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  24. Published

    An Investigation into Scuffing and Subsurface Fatigue in a Lubricated Rolling/Sliding Contact

    Savolainen, M., 28 Jun 2019, Tampere University. 81 p. (Tampere University Dissertations; vol. 57)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  25. Published

    Characterization of cracks formed in large flat-on-flat fretting contact

    Juoksukangas, J., Nurmi, V., Hintikka, J., Vippola, M., Lehtovaara, A., Mäntylä, A., Vaara, J. & Frondelius, T., Jul 2019, In : International Journal of Fatigue. 124, p. 361-370 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  26. Published

    Digital valve system for ITER remote handling – Design and prototype testing

    Siivonen, L., Paloniitty, M., Linjama, M., Sairiala, H. & Esqué, S., Sep 2019, In : Fusion Engineering and Design. 146, p. 1637 - 1641

    Research output: Contribution to journalArticleScientificpeer-review

  27. Published

    Heat management for water-hydraulic systems at ITER remote handling

    Väyrynen, J., Aha, L., Mattila, J., Esqué, S. & Sharratt, R., Sep 2019, In : Fusion Engineering and Design. 146, p. 2314-2318 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  28. Published

    Servo valve endurance test for water-hydraulic systems in ITER-relevant conditions

    Aha, L., Väyrynen, J., Tammisto, J., Mattila, J., Esqué, S. & Sharratt, R., Sep 2019, In : Fusion Engineering and Design. 146, p. 2523 - 2526

    Research output: Contribution to journalArticleScientificpeer-review

  29. Published

    Shedding frequency in cavitation erosion evolution tracking

    Ylönen, M., Franc, J. P., Miettinen, J., Saarenrinne, P. & Fivel, M., 1 Sep 2019, In : International Journal of Multiphase Flow. 118, p. 141-149 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  30. Published

    Internal and external stakeholders’ impact on product development curriculum design

    Lindsten, H., Auvinen, P. & Juuti, T., 12 Sep 2019, DS 95: Proceedings of the 21st International Conference on Engineering and Product Design Education (E&PDE 2019), University of Strathclyde, Glasgow. 12th -13th September 2019. The Design Society

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  31. Published

    Implementation of capability matchmaking software facilitating faster production system design and reconfiguration planning

    Järvenpää, E., Siltala, N., Hylli, O. & Lanz, M., Oct 2019, In : Journal of Manufacturing Systems. 53, p. 261-270 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  32. Published

    Numerical modelling of concrete fracture: A mesoscopic approach based on embedded discontinuity FEM

    Saksala, T., Oct 2019, Proceedings of the 32nd Nordic Seminar on Computational Mechanics. Niemi, A. H. & Koivurova, H. (eds.). University of Oulu, p. 146-149 4 p. (Raportti / Oulun yliopisto, konetekniikka; no. 9).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  33. Published

    On the regularisation property of the Kachanov-Rabotnov continuum damage model - a finite element study

    Askes, H., Hartikainen, J., Kolari, K., Kouhia, R., Saksala, T. & Vilppo, J., Oct 2019, Proceedings of the 32nd Nordic Seminar on Computational Mechanics. Niemi, A. H. & Koivurova, H. (eds.). University of Oulu, p. 43-46 4 p. (Raportti / Oulun yliopisto, Konetekniikka; no. 9).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  34. Published

    Model-based control of a pressure-compensated directional valve with significant dead-zone

    Lampinen, S., Koivumäki, J., Mattila, J. & Jouni, N., 7 Oct 2019, ASME/BATH 2019 Symposium on Fluid Power and Motion Control: October 7–9, 2019 Longboat Key, Florida, USA . ASME

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  35. Published

    Propulsion system development and power consumption in an autonomous underwater vehicle

    Zavari, S., Usenius, O., Villa, J., Heininen, A., Salomaa, T., Laitinen, J., Aaltonen, J. & Koskinen, K. T., 31 Oct 2019, 2019 23rd International Conference on System Theory, Control and Computing (ICSTCC). IEEE, p. 521-524 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  36. Published

    Technology Value Mapping (TVM) : Method for Designing Technology Value Capture by Visually Modelling Product Properties and Behaviours

    Mämmelä, J., 12 Dec 2019, Tampere University. 71 p. (Tampere University Dissertations; vol. 188)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  37. 2020
  38. Published

    A concept for defining the mixed-mode behaviour of tough epoxy film adhesives by single specimen design

    Jokinen, J., Orell, O., Wallin, M. & Kanerva, M., 2020, In : Journal of Adhesion Science and Technology. 34, 18, p. 1982-1999 18 p.

    Research output: Contribution to journalArticleScientificpeer-review

  39. Published

    Analyses of criticality for multiple-site delaminations in the flap spar of Finnish F/A-18 aircraft

    Jokinen, J., Kanerva, M., Wallin, M. & Saarela, O., 2020, In : AERONAUTICAL JOURNAL.

    Research output: Contribution to journalArticleScientificpeer-review

  40. Published

    Avoiding the high friction peak in fretting contact

    Juoksukangas, J., Hintikka, J., Lehtovaara, A., Mäntylä, A., Vaara, J. & Frondelius, T., 2020, In : Rakenteiden Mekaniikka. 53, 1, p. 12-19 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  41. Published

    Comparative energy analysis of a load sensing system and a zonal hydraulics for a 9-tonne excavator

    Casoli, P., Scolari, F., Minav, T. & Rundo, M., 2020, In : Actuators. 9, 2, 19 p., 39.

    Research output: Contribution to journalArticleScientificpeer-review

  42. Published

    Conceptual model of modularisation

    Pakkanen, J., Juuti, T., Lehtonen, T., Peltonen, J. & Laine, R., 2020, DS 101: Proceedings of NordDesign 2020, Lyngby, Denmark, 12th - 14th August 2020. Mortensen, N. H., Hansen, C. T. & Deininger, M. (eds.). DESIGN SOCIETY, 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  43. Published

    Deformability analysis and improvement in stretchable electronics systems through finite element analysis

    Di Vito, D., Mosallaei, M., Vahed, B. K., Kanerva, M. & Mäntysalo, M., 2020, Proceedings of XXIV AIMETA Conference 2019. Carcaterra, A., Graziani, G. & Paolone, A. (eds.). Springer, p. 755-763 9 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  44. Published

    EHL/mixed transition of fully formulated environmentally acceptable gear oils

    Bayat, R. & Lehtovaara, A., 2020, In : Tribology International. 146, 12 p., 106158.

    Research output: Contribution to journalArticleScientificpeer-review

  45. E-pub ahead of print

    Factors affecting the organizational readiness to design autonomous machine systems: Towards an evaluation framework

    Vuorimaa, V., Heikkilä, E., Karvonen, H., Koskinen, K. & Laitinen, J., 2020, Intelligent Systems and Applications - Proceedings of the 2020 Intelligent Systems Conference IntelliSys Volume 3. Arai, K., Kapoor, S. & Bhatia, R. (eds.). Springer, p. 742-747 6 p. (Advances in Intelligent Systems and Computing; vol. 1252 AISC).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  46. Published

    FEM-based wear simulation for fretting contacts

    Mäntylä, A., Juoksukangas, J., Hintikka, J., Frondelius, T. & Lehtovaara, A., 2020, In : Rakenteiden Mekaniikka. 53, 1, p. 20-27 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  47. Published

    Flow-limited path-following control of a double Ackermann steered hydraulic mobile manipulator

    Hulttinen, L. & Mattila, J., 2020, 2020 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM). IEEE, p. 625-630 6 p. ( IEEE/ASME International Conference on Advanced Intelligent Mechatronics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  48. Published

    Gas-Liquid Ratio Imbalance Indicators of a Fighter Aircraft Shock Absorber

    Heininen, A., Aaltonen, J., Koskinen, K. & Huitula, J., 2020, Engineering Assets and Public Infrastructures in the Age of Digitalization: Proceedings of the 13th World Congress on Engineering Asset Management. Liyanage, J. P., Amadi-Echendu, J. & Mathew, J. (eds.). Springer, p. 723-730 8 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  49. Published

    Improving worker health and safety in wire arc additive manufacturing: A graph-based approach

    Nagarajan, H. P. N., Panicker, S., Mokhtarian, H., Coatanea, E. & Haapala, K. R., 2020, 27th CIRP Life Cycle Engineering Conference (LCE2020): Advancing Life Cycle Engineering: from technological eco-efficiency to technology that supports a world that meets the development goals and the absolute sustainability. Elsevier, Vol. 90. p. 461-466 6 p. (Procedia CIRP; vol. 90).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  50. Published

    Introducing Multi-Convexity in Path Constrained Trajectory Optimization for Mobile Manipulators

    Singh, A. K., Ahonen, A., Ghabcheloo, R. & Mueller, A., 2020, European Control Conference 2020, ECC 2020. IEEE, p. 1178-1185 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  51. Published

    Life End Stock Need Estimation for Repairable Spare Components of Obsoleting Fleet by Simulation

    Toikka, T., Laitinen, J. & Koskinen, K. T., 2020, Engineering Assets and Public Infrastructures in the Age of Digitalization: Proceedings of the 13th World Congress on Engineering Asset Management. Liyanage, J. P., Amadi-Echendu, J. & Mathew, J. (eds.). Springer, p. 521-529 9 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  52. Published

    Method for Evaluating the Value of Technology in the Manufacturing Industry

    Mämmelä, J., Juuti, T., Julkunen, P., Lemmetty, P. & Pakkanen, J., 2020, Engineering Assets and Public Infrastructures in the Age of Digitalization: Proceedings of the 13th World Congress on Engineering Asset Management. Liyanage, J. P., Amadi-Echendu, J. & Mathew, J. (eds.). Springer, p. 855-863 9 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  53. Published

    On the Kachanov-Rabotnov continuum damage model

    Askes, H., Hartikainen, J., Kolari, K., Kouhia, R., Saksala, T. & Vilppo, J., 2020, In : Rakenteiden mekaniikka. 53, 2, p. 125-144 20 p.

    Research output: Contribution to journalArticleScientificpeer-review

  54. Published

    Processing map for controlling microstructure and unraveling various deformation mechanisms during hot working of CoCrFeMnNi high entropy alloy

    Patnamsetty, M., Somani, M. C., Ghosh, S., Ahmed, S. & Peura, P., 2020, In : Materials Science and Engineering A. 793, 17 p., 139840.

    Research output: Contribution to journalArticleScientificpeer-review

  55. Published

    Redundancy-based visual tool center point pose estimation for long-reach manipulators

    Mäkinen, P., Mustalahti, P., Launis, S. & Mattila, J., 2020, 2020 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM 2020. IEEE, p. 1387-1393 7 p. (IEEE/ASME International Conference on Advanced Intelligent Mechatronics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  56. Published

    Resilient Cooperative Voltage Control for Distribution Network with High Penetration Distributed Energy Resources

    Gusrialdi, A., Xu, Y., Qu, Z. & Simaan, M. A., 2020, European Control Conference 2020, ECC 2020. IEEE, p. 1533-1539 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  57. Published

    Separating the impact of work environment and machine operation on harvester performance

    Melander, L. & Ritala, R., 2020, In : EUROPEAN JOURNAL OF FOREST RESEARCH. 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  58. Published

    Value Creation Mechanisms of Modularisation in the Engineering Asset Life Cycle

    Pakkanen, J., Juuti, T. & Lehtonen, T., 2020, Engineering Assets and Public Infrastructures in the Age of Digitalization: Proceedings of the 13th World Congress on Engineering Asset Management. Liyanage, J. P., Amadi-Echendu, J. & Mathew, J. (eds.). Springer, p. 846-854 9 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  59. Published

    Cavitation Erosion Monitoring by Acoustic Emission

    Ylönen, M., 17 Jan 2020, Tampere University. (Tampere University Dissertations; vol. 203)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  60. Published

    Three Fundamental Trade-offs in Expanding Sustainable Distributions of Manufacturing

    Fox, S., 23 Apr 2020, Tampere University. (Tampere University Dissertations; vol. 247)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  61. Published

    Partitioning types in product modularisation

    Pakkanen, J., Lehtonen, T. & Juuti, T., 11 Jun 2020, Proceedings of the Design Society: DESIGN Conference. Cambridge University Press, p. 2325-2334 10 p. (Proceedings of the Design Society: DESIGN Conference; vol. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  62. Published

    Impedance Control of Hydraulic Series Elastic Actuator with a Model-Based Control Design

    Mustalahti, P. & Mattila, J., Aug 2020, 2020 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM). IEEE, p. 966-971 6 p. (IEEE/ASME International Conference on Advanced Intelligent Mechatronics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Previous 1...9 10 11 12 13 Next
Download list To download, please limit the number of search results to 1,000 or less.