Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. 2012
  2. Published

    Accuracy measurements of miniature robot using optical CMM

    Vuola, A. & Tuokko, R., 2012, Precision assembly technologies and systems. Proceedings of the 6th IFIP WG 5.5 International precision assembly seminar, IPAS 2012, 12-14 February, 2012, Chamonix, France. Svetan, R. (ed.). Heidelberg: Springer, p. 126-133 (IFIP Advances in Information and Communication Technology; vol. 371).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  3. Published

    Achieving integrated product and production development with knowledge creation and flow model

    Lehtonen, T., Pakkanen, J., Juuti, T., Vanhatalo, M. & Becker, I., 2012, The 22nd International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2012, 10-13 June, 2012, Helsinki, Finland. Hasse, N., Satu, K., Ville, T. & Seppo, T. (eds.). Tampere: Tampere University of Technology. Department of Production Engineering, p. 357-364 (International Conference on Flexible Automation and Intelligent Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  4. Published

    A co-creation tool in walk-in virtual environment: making prospective work visible

    Tiainen, T., Kaapu, T., Ellman, A. & Kuusisto, J., 2012, Proceedings of the European Conference for Information Systems ECIS 2012, June 10-13, 2012 ESADE, Barcelona, Spain. p. 1-11 11 p. Paper 43. (European Conference on Information Systems).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  5. Published

    A constitutive model for strain-rate dependent ductile-to-brittle transition

    Hartikainen, J., Kolari, K. & Kouhia, R., 2012, Proceedings of the 21st IAHR International Symposium on Ice, Ice Research for Sustainable Environment, Dalian, China, June 11-15, 2012. Zhijun, LI. & Peng, LU. (eds.). Dalian, China: Dalian University of Technology, p. 24-29 (IAHR International Symposium on Ice).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  6. Published

    A cross-layer approach to energy management in manufacturing

    Florea, A., Garcia Izaguirre Montemayor, J. A., Postelnicu, C. & Martinez Lastra, J. L., 2012, Proceedings of IEEE 10th International Conference on Industrial Informatics, INDIN 2012, 25-27 July, 2012, Beijing, China. Piscataway: Institute of Electrical and Electronics Engineers IEEE, p. 304-308 (IEEE International Conference on Industrial Informatics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  7. Published

    Adaptation of manufacturing systems in dynamic environment based on capability description method

    Järvenpää, E., Luostarinen, P., Lanz, M. & Tuokko, R., 2012, Manufacturing systems. Faieza, A. A. (ed.). Rijeka, Croatia: InTech, p. 93-118

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  8. Published

    A device configuration management tool for context-aware system

    Kuutti, A., Dvoryanchikova, A., Lobov, A., Martinez Lastra, J. L. & Vahtera, T., 2012, Proceedings of IEEE 10th International Conference on Industrial Informatics, INDIN 2012, 25-27 July, 2012, Beijing, China. Piscataway: Institute of Electrical and Electronics Engineers IEEE, p. 10-15 (IEEE International Conference on Industrial Informatics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  9. Published

    A flexible laser micro-machining platform

    Vihinen, J., Latokartano, J. & Kumpulainen, T., 2012, Proceedings of The 8th International Workshop on Microfactories, IWMF 2012, 18-20 June, 2012, Tampere Hall, Tampere, Finland. Reijo, T., Minna, L. & Pasi, L. (eds.). Tampere: Tampere University of Technology, p. 1-6 6 p. (International Workshop on MicroFactories).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  10. Published

    A Framework for evaluating applicability of design methodologies

    Vanhatalo, M., Lehtonen, T., Juuti, T., Pakkanen, J. & Riitahuhta, A., 2012, The 12th International Design Conference, DESIGN 2012, 21-24 May, 2012, Dubrovnik, Croatia. Dorian, M., Mario, S., Neven, P. & Nenad, B. (eds.). Zagreb: Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, p. 1167-1176 (International Design Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  11. Published

    A Framework of design for procurement

    Pulkkinen, A., Martikainen, A. & Kuusela, J., 2012, Proceedings of the 18th International Conference on Engineering, Technology and Innovation 2012, ICE 2012, 18-20 June 2012, Munich, Germany. Bernhard, K., Thomas, H., Klaus, S. & Klaus-Dieter, T. (eds.). Munich: Strascheg Center for Entrepreneurship SCE at the Munich University of Applied Sciences (MUAS), p. 307-316 (International Conference on Engineering, Technology and Innovation).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  12. Published

    A holistic view on design and development of manufacturing systems

    Nylund, H. & Andersson, P. H., 2012, Proceedings of the 45th CIRP CMC Conference on Manufacturing Systems Technology. Chryssolouris, G. & Mourtzis, D. (eds.). p. 438-443 (CIRP Conference on Manufacturing Systems).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  13. Published

    A Holistic View on Design and Development of Manufacturing Systems

    Nylund, H. & Andersson, P. H., 2012, In : Procedia CIRP. 3, p. 388-393

    Research output: Contribution to journalArticleScientificpeer-review

  14. Published

    A low resolution digital hydraulic control application

    Kukkonen, S. & Mäkinen, E., 2012, Proceedings of the 13th Mechatronics Forum International Conference, September 17-19, 2012, Johannes Kepler University Linz, Austria, Advances in Mechatronics. Scheidl, R. & Jakoby, B. (eds.). Linz: TRAUNER VERLAG, p. 8 p (Mechatronics Forum; vol. 1/3).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  15. Published

    An agent-based system for orchestration support of web service-enabled devices in discrete manufacturing systems

    Villasenor Herrera, V., Vidales Ramos, A. & Martinez Lastra, J., 2012, In : Journal of Intelligent Manufacturing. 23, 6, p. 2681-2702

    Research output: Contribution to journalArticleScientificpeer-review

  16. Published

    Analysis of Adaptive/Learning Control Methods in Cyclic Hydraulic System

    Herranen, M., Enlund, J., Uusisalo, J. & Huhtala, K., 2012, Proceedings of the 8th International Fluid Power Conference, Dresden, March 26-28, 2012. Dresden: Technische Universität Dresden, Institute of Fluid Power, p. 399-410 (International Fluid Power Conference; vol. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  17. Published

    Analysis of Slipper Structures in Water Hydraulic Axial Piston Pumps

    Rokala, M., 2012, Tampere: Tampere University of Technology. (Tampereen teknillinen yliopisto, Julkaisu; no. 1055)

    Research output: Book/ReportDoctoral thesisMonograph

  18. Published

    An application of B2MML in computer integrated manufacturing systems

    He, D., Lobov, A. & Martinez Lastra, J. L., 2012, Proceedings of the 16th International Conference on Mechatronics Technology, ICMT 2012, 16-19 October, 2012, Tianjin, China. Dante, J. D. G. (ed.). Tianjin: Tianjin University, p. 300-305 (International Conference on Mechatronics Technology).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  19. Published

    An approach to use PERA in enterprise modeling for industrial systems

    He, D., Lobov, A., Gonzalez Moctezuma, L. E. & Martinez Lastra, J. L., 2012, Proceedings of the 38th Annual Conference of the IEEE Industrial Electronics Society, IECON 2012, 25-28 October, 2012, Montreal, Quebec, Canada. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, p. 4196-4203 (Annual Conference of the IEEE Industrial Electronics Society).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  20. Published

    An Efficient Heuristic Estimate for Non-holonomic Motion Planning

    Choi, J-W., 2012, The 4th Workshop on Planning, Perception and Navigation for Intelligent Vehicles, October 7th, 2012 Vilamoura, Algarve, Portugal. p. 1-6 6 p. (Workshop on Planning, Perception and Navigation for Intelligent Vehicles).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  21. Published

    A New Method and Format for Describing CANopen System Topology

    Helminen, M., Salonen, J., Saha, H., Nykänen, O., Koskinen, K. T., Ranta, P. & Pohjolainen, S., 2012, Proceedings of the 13th International CAN Conference, iCC 2012 in Hambach Castle, March 5 to March 6, Germany. CAN in Automation e.V., p. 1-8 8 p. (International CAN Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  22. Published

    An Exceptional Generalization of the Poisson Distribution

    Hagmark, P-E., 2012, In : Open Journal of Statistics. 2, p. 313-318

    Research output: Contribution to journalArticleScientificpeer-review

  23. Published

    An open energy consumption-relevant factory automation dataset in the cloud

    Zhang, B., Postelnicu, C., Jokinen, J. & Martinez Lastra, J. L., 2012, Proceedings of IEEE 10th International Conference on Industrial Informatics, INDIN 2012, 25-27 July, 2012, Beijing, China. Piscataway: Institute of Electrical and Electronics Engineers IEEE, p. 792-797 (IEEE International Conference on Industrial Informatics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  24. Published

    An Optimal Controller for Hydrostatic Drives

    Backas, J., 2012, GIM - Generic Intelligent Machines, Proceedings of the 6th GIM Scientific Workshop, November 7-8, 2012, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). Tampere: Tampere University of Technology. Department of Intelligent Hydraulics and Automation, p. 83-88 (Generic Intelligent Machines Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  25. Published

    A Petri net-based approach to incremental modelling of flow and resources in service-oriented manufacturing systems

    Popescu, C., Cavia Soto, M. & Martinez Lastra, J. L., 2012, In : International Journal of Production Research. 50, 2, p. 325-343

    Research output: Contribution to journalArticleScientificpeer-review

  26. Published

    A Potential Field and Bug Compound Navigation Algorithm for Nonholonomic Wheeled Robots

    Choi, J-W., 2012, ICIES2012, The 1st International Conference on Innovative Engineering, 7-9 December 2012, Alexandria, Egypt,. Institute of Electrical and Electronics Engineers IEEE, p. 166-171 6 p. (International Conference on Innovative Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  27. Published

    Applicability of market-based competition models for energy efficient factory automation systems

    Postelnicu, C. & Martinez Lastra, J. L., 2012, Proceedings of IEEE 10th International Conference on Industrial Informatics, INDIN 2012, 25-27 July, 2012, Beijing, China. Piscataway: Institute of Electrical and Electronics Engineers IEEE, p. 326-330 (IEEE International Conference on Industrial Informatics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  28. Published

    Applications and business models for micro and desktop production systems

    Nurmi, A., Heikkilä, R. & Tuokko, R., 2012, Proceedings of the 8th International Workshop on Microfactories, IWMF 2012, 18-20 June, 2012, Tampere Hall, Tampere, Finland. Reijo, T., Minna, L. & Pasi, L. (eds.). Tampere: Tampere University of Technology, p. 1-10 10 p. (International Workshop on MicroFactories).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  29. Published

    Augmented reality for operator assistance

    Kolu, A., 2012, GIM - Generic Intelligent Machines, Proceedings of the 6th GIM Scientific Workshop, November 7-8, 2012, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). Tampere: Tampere University of Technology. Department of Intelligent Hydraulics and Automation, p. 9-13 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  30. Published

    Automotive transmission system design based on reliability parameters

    Douzi, I. K., Virtanen, S. & Verma, A. K., 2012, In : Journal of Reliability and Statistical Studies. 5, 2, p. 2229-5666

    Research output: Contribution to journalArticleScientificpeer-review

  31. Published

    Capability-based adaptation of production systems in a changing environment

    Järvenpää, E., 2012, Tampere: Tampere University of Technology. 168 p. (Tampere University of Technology. Publication; vol. 1082)

    Research output: Book/ReportDoctoral thesisMonograph

  32. Published

    Capturing the flows of the product process

    Pakkanen, J., Becker, I., Lehtonen, T. & Juuti, T., 2012, The 12th International Design Conference, DESIGN 2012, 21-24 May, 2012, Dubrovnik, Croatia. Dorian, M., Mario, S., Neven, P. & Nenad, B. (eds.). Zagreb: Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, p. 1557-1566 (International Design Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  33. Published

    Case: Control application for rapidly configurable manufacturing laboratory environment

    Siltala, N., Vihinen, J. & Tuokko, R., 2012, The 22nd International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2012, 10-13 June, 2012, Helsinki, Finland. Hasse, N., Satu, K., Ville, T. & Seppo, T. (eds.). Tampere: Tampere University of Technology. Department of Production Engineering, p. 217-224 (International Conference on Flexible Automation and Intelligent Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  34. Published

    CFD-Modeling of Fume Formation in Kraft Recovery Boilers

    Leppänen, A., Välimäki, E., Oksanen, A. & Tran, H., 2012, TAPPI PEERS Conference Proceedings 14.-18.10.2012, Savannah, USA. TAPPI, (TAPPI PEERS Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  35. Published

    CHT-12: Combined numerical and analytical method for fin array heat transfer

    Karvinen, R. & Lampio, K., 2012, ICHMT International Symposium on Advances in Computational Heat Transfer, CHT-12, 1-6 July 2012, Bath, England. Begell House, (Advances in Computational Heat Transfer).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  36. Published

    Comparison of five low cost manipulators for microfactories

    Siltala, N., Vuola, A., Prusi, T., Heikkilä, R. & Tuokko, R., 2012, Proceedings of the 8th International Workshop on Microfactories, IWMF 2012, 18-20 June, 2012, Tampere Hall, Tampere, Finland. Reijo, T., Minna, L. & Pasi, L. (eds.). Tampere: Tampere University of Technology, p. 1-8 8 p. (International Workshop on MicroFactories).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  37. Published

    Concept of the electro-water-hydraulic hybrid mobile machine

    Aaltonen, J., Sairiala, H. & Koskinen, K. T., 2012, Topic water hydraulics, Dutch Fluid Power Conference, Ede, The Netherlands 13th September 2012. p. 97-111 15 p. (Dutch Fluid Power Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  38. Published

    Condition monitoring for predictive maintenance in the pulp & paper industry: two implementions

    Jokinen, J., Postelnicu, C., Zhang, B., Camp, R., Suhonen, M., Karhumäki, O. & Martinez Lastra, J. L., 2012, Proceedings of 2012 IEEE International Conference on Systems, Man, and Cybernetics, SMC 2012, 14-17 October, 2012, COEX, Seoul, Korea. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, p. 1633-1638 (IEEE International Conference on Systems, Man and Cybernetics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  39. Published

    Considering aspects of lean, agility, and sustainability in digital manufacturing systems

    Nylund, H., Kirman, B., Koho, M., Tapaninaho, M. & Torvinen, S., 2012, In : International Journal of Advanced Manufacturing Systems. 14, 2, p. 9-16

    Research output: Contribution to journalArticleScientificpeer-review

  40. Published

    Contribution of maxwell stress in air on the deformations of induction machines

    Fonteyn, K. A., Belahcen, A., Rasilo, P., Kouhia, R. & Arkkio, A., 2012, In : Journal of Electrical Engineering and Technology. 7, 3, p. 336-341 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  41. Published

    Coordinated Control of Hydraulic Mobile Manipulators

    Ghabcheloo, R. & Huhtala, K., 2012, The 2nd IFAC Workshop on Multivehicle Systems, MVS, 3-4 October 2012, Espoo, Finland. Halme, A. & Suomela, J. (eds.). Laxenburg: The International Federation of Automatic Control IFAC, p. 37-42 (IFAC Workshop on Multivehicle Systems; vol. 2, no. Part 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  42. Published

    Corrosion resistant laser coatings for hydraulic piston rods

    Tuominen, J., Näkki, J., Junkala, J., Miettinen, J., Peltola, T. & Vuoristo, P., 2012, Proceedings of the 31st International Congress on Applications of Lasers & Electro-Optics, ICALEO, September 23-27, 2012, Anaheim, California, USA. Laser Institute of America, p. 1202-1210 (International Congress on Applications of Lasers & Electro-Optics; vol. 105).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  43. Published

    Data analysis process of working hydraulics of small mobile machine

    Krogerus, T., Rokala, M. & Koskinen, K. T., 2012, In : International Journal of Fluid Power. 13, 3, p. 5-15

    Research output: Contribution to journalArticleScientificpeer-review

  44. Published

    Decision making by using tree-like structures on industrial controllers

    Gonzalez Moctezuma, L. E., Lobov, A. & Martinez Lastra, J. L., 2012, Proceedings of 10th International Conference on ICT and Knowledge Engineering, 21-23 November, 2012, Siam University, Bangkok, Thailand. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, p. 77-83 (International Conference on ICT and Knowledge Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  45. Published

    Design for human - virtual engineering is a media for knowledge transfer

    Leino, S-P. & Pulkkinen, A., 2012, The 12th International Design Conference, DESIGN 2012, 21-24 May, 2012, Dubrovnik, Croatia. Dorian, M., Mario, S., Neven, P. & Nenad, B. (eds.). Zagreb: Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, p. 1507-1514 (International Design Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  46. Published

    Design-optimization of cylindrical, layered composite structures using efficient laminate parameterization

    Mönicke, A., Katajisto, H., Leroy, M., Petermann, N., Kere, P. & Perillo, M., 2012, 12th European Conference on Spacecraft Structures, Materials and Environmental Testing, Noordwijk, the Netherlands, 20-23 March, 2012. ESA SP. European Space Agency, p. 1-6 6 p. (ESA - SP; vol. 691).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  47. Published

    Detecting of faults in a valve system and a fault tolerant control

    Siivonen, L. & Linjama, M., 2012, Patent No. Pat. US 8215227 B2, Priority date 10 Jul 2012, Priority No. (21) 11/991559;(30) FI 20055479

    Research output: PatentScientific

  48. Published

    Detection and isolation of leakage and valve faults in hydraulic systems in varying loading conditions, Part 2: Fault detection and isolation scheme

    Nurmi, J. & Mattila, J., 2012, In : International Journal of Fluid Power. 13, 1, p. 17-27

    Research output: Contribution to journalArticleScientificpeer-review

  49. Published

    Detection of abnormal energy patterns pointing to gradual conveyor misalignment in a factory automation testbed

    Khajehzadeh, N., Postelnicu, C. & Martinez Lastra, J. L., 2012, Proceedings of 2012 IEEE International Conference on Systems, Man, and Cybernetics, SMC 2012, 14-17 October, 2012, COEX, Seoul, Korea. Piscataway, NJ: IEEE, p. 1225-1229 (International Conference on Systems, Man, and Cybernetics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  50. Published

    Developing VIP2M: A Virtual Environment for Prototyping Mobile Work Machines

    Kuusisto, J., Kaapu, T., Ellman, A. & Tiainen, T., 2012, Proceedings of the 12th International Design Conference, DESIGN 2012, 21-24 May, 2012, Dubrovnik, Croatia. Marjanovic, D., Storga, M., Pavkovic, N. & Bojcetic, N. (eds.). Zagreb: Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, The Design Society, Glasgow, p. 657-666 (International Design Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  51. Published

    Development of a rule-base for matching product requirements against resource capabilities in an adaptive production system

    Järvenpää, E., Luostarinen, P., Lanz, M. & Tuokko, R., 2012, The 22nd International Conference on Flexible Automation and Intelligent Manufacturing , FAIM 2012, 10-13 June, 2012, Helsinki, Finland. Hasse, N., Satu, K., Ville, T. & Seppo, T. (eds.). Tampere: Tampere University of Technology. Department of Production Engineering, p. 449-456 (International Conference on Flexible Automation and Intelligent Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  52. Published

    Development of a test device for the evaluation of journal bearings

    Sandvik, K., Lehtovaara, A., Makkonen, E., Kallio, M., Kuvaja, K. & Kuokkala, V-T., 2012, In : Tribologia - Finnish Journal of Tribology. 31, 1-2, p. 12-21

    Research output: Contribution to journalArticleScientificpeer-review

  53. Published

    DFMA Implementation in high variability product context

    Lahtinen, T., Berkovits, J. & Riitahuhta, A., 2012, Proceedings of the 9th International Symposium on Tools and Methods of Competitive Engineering, TMCE 2012, 7-11 May, 2012, Karlsruhe, Germany. Imre, H., Zoltan, R., Albert, A. & Mathias, B. (eds.). Delft, Netherlands: Delft University of Technology, p. 915-926 (International Symposium on Tools and Methods of Competitive Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  54. Published

    Digitaalinen Hydraulisäätö - tulevaisuuden tekniikkaa?

    Siivonen, L., 2012, In : Promaint. 26, 7, p. 41-43

    Research output: Contribution to journalArticleProfessional

  55. Published

    Digital Hydraulic Cylinder Drive For Folding Cargo Hatches

    Westerlund, S. & Mäkinen, E., 2012, Proceedings of the 7th FPNI PhD Symposium on Fluid Power, University of Modena and Reggio Emilia, June 27-30, 2012, Reggio Emilia, Italy. Milani, M., Montorsi, L. & Paltrinieri, F. (eds.). Fluid Power Net International, p. 235-248 (Fluid Power Net International PhD Symposium; vol. 7).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  56. Published

    Digital Hydraulic Pressure Relief Function

    Ketonen, M., Huova, M., Heikkilä, M., Linjama, M., Boström, P. & Walden, M., 2012, Fluid Power and Motion Control, FPMC 2012, University of Bath, UK. Johnston, D. N. & Plummer, A. R. (eds.). Bath, United Kingdom: Centre for Power Transmission and Motion Control, University of Bath, ASME, p. 137-150 (Bath/ASME Symposium on Fluid Power and Motion Control).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  57. Published

    Digital Imaging and Piezo-dispenser Actuator in Automatic Flocculation Control

    Tomperi, J., Honkanen, M., Kallio, P., Leiviskä, K., Saarenrinne, P., Joensuu, I. & Piironen, M., 2012, In : Sensors and Transducers. 136, 1, p. 83-95

    Research output: Contribution to journalArticleScientificpeer-review

  58. Published

    Digital manufacturing supporting autonomy and collaboration of manufacturing systems

    Nylund, H. & Andersson, P. H., 2012, Manufacturing systems. Faieza, A. A. (ed.). Rijeka, Croatia: InTech, p. 261-284

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  59. Published

    Direct computation of critical equilibrium states for spatial beams and frames

    Mäkinen, J., Kouhia, R., Fedoroff, A. & Marjamäki, H., 2012, In : International Journal for Numerical Methods in Engineering. 89, 2, p. 135-153

    Research output: Contribution to journalArticleScientificpeer-review

  60. Published

    Discovering material recovery scenarios for industrial machinery: A case-based approach

    Bernstein, W. Z., Ramanujan, D., Koho, M., Zhao, F. & Ramani, K., 2012, ASME 2012 International Manufacturing Science and Engineering Conference (MSEC) collocated with the 40th North American Manufacturing Research Conference and in participation with the International Conference on Tribology Materials and Processing, Notre Dame, IN, USA, 4-8 June, 2012. ASME, p. 1097-1104 8 p. (ASME International Manufacturing Science and Engineering Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  61. Published

    Discussion: Is the future of fluid power digital? Response

    Linjama, M., Scheidl, R. & Schmidt, S., 2012, In : Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering. 226, I6, p. 726-727

    Research output: Contribution to journalArticleScientific

  62. Published

    Disrupted flow sensing impairs hydrodynamic performance and increases the metabolic cost of swimming in the yellowtail kingfish, Seriola Lalandi

    Yanase, K., Herbert, N. A. & Montgomery, J. C., 2012, In : Journal of Experimental Biology. 215, 22, p. 3944-3954

    Research output: Contribution to journalArticleScientificpeer-review

  63. Published

    Divertor RH design updates and DTP2 Phase 2 testing

    Siuko, M., Järvenpää, J. & Mattila, J., 2012, VALTION TEKNILLINEN TUTKIMUSKESKUS. 8 p. (VTT Science; vol. 7)

    Research output: Book/ReportCommissioned reportProfessional

  64. Published

    DSM made easy

    Halonen, N., Juuti, T. & Luostarinen, P., 2012, The 12th International Design Conference, DESIGN 2012, 21-24 May, 2012, Dubrovnik, Croatia. Dorian, M., Mario, S., Neven, P. & Nenad, B. (eds.). Zagreb: Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, p. 1445-1454 (International Design Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  65. Published

    Ecosystem oriented energy management: an implementation

    Florea, A., Postelnicu, C., Zhang, B. & Martinez Lastra, J. L., 2012, Proceedings of 2012 IEEE International Conference on Systems, Man, and Cybernetics, SMC 2012, October 14-17 2012, COEX, Seoul, Korea. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, p. 912-918 (IEEE International Conference on Systems, Man, and Cybernetics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  66. Published

    EFDA goal oriented training in remote handling - GOTRH

    Mattila, J., Alho, P., Väyrynen, J., Sibois, R. & Salminen, K., 2012, VALTION TEKNILLINEN TUTKIMUSKESKUS. 3 p. (VTT Science; vol. 7)

    Research output: Book/ReportCommissioned reportProfessional

  67. Published

    Effect of oil viscosity on filter performance in lubrication oil system

    Heiskanen, V., Mäkelä, T., Kapanen, P. & Rinkinen, J., 2012, Proceedings of the 11th World Filtration Congress & Exhibition, WFC11, April 16-20, 2012, Graz, Austria. Vienna, Austria: Gesellschaft Österreichischer Chemiker GÖCH, p. 1-15 15 p. (World Filtration Congress).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  68. Published

    Elintarviketeollisuuden koneautomaation kehitys kaipaa tiivistämistä

    Sairiala, H. & Koskinen, K. T., 2012, In : Kehittyvä elintarvike. 23, 4, p. 12-13

    Research output: Contribution to journalArticleProfessional

  69. Published

    Embedded service oriented diagnostics based on energy consumption

    Postelnicu, C., Khajehzadeh, N. & Martinez Lastra, J. L., 2012, Proceedings of 2012 IEEE 6th International Conference on Information and Automation for Sustainability, ICIAFS 2012, 27-29 September, 2012, Beijing, China. Piscataway, NJ: IEEE, p. 42-46 (International Conference on Information and Automation for Sustainability).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  70. Published

    Embedded service oriented monitoring for the energy aware factory

    Postelnicu, C., Zhang, B. & Martinez Lastra, J. L., 2012, Proceedings of 2012 IEEE 6th International Conference on Information and Automation for Sustainability, ICIAFS 2012, 27-29 September, 2012, Beijing, China. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, p. 36-41 (International Conference on Information and Automation for Sustainability).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  71. Published

    Energy efficient digital hydraulic valve control utilizing pressurized tank line

    Huova, M. & Linjama, M., 2012, Proceedings of the 8th International Fluid Power Conference Dresden, March 26-28, 2012. Dresden: Technische Universutät Dresden, Dresdner Verein zur Förderung der Fluidtechnik, p. 111-122 12 p. (International Fluid Power Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  72. Published

    Energy Saving with Pump Control in Working Hydraulics

    Tikkanen, R., Ahola, V. & Uusi-Heikkilä, J., 2012, GIM - Generic Intelligent Machines, Proceedings of the 6th GIM Scientific Workshop, November 7-8, 2012, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). Tampere: Tampere University of Technology. Department of Intelligent Hydraulics and Automation, p. 77-81 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  73. Published

    Enhancement of security in the hierarchy model of control and automation by applying single sign-on approach for web services

    Jafary, P., Lobov, A. & Martinez Lastra, J. L., 2012, Proceedings of 10th International Conference on ICT and Knowledge Engineering, 21-23 November, 2012, Siam University, Bangkok, Thailand. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, p. 252-259 (International Conference on ICT and Knowledge Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  74. Published

    Evaluating the confidence level of prognostic predictions

    Lumme, V. & Pylvänen, M., 2012, 2012 IEEE Conference on Prognostics and Health Management PHM, 18-21 June 2012, Denver, CO, USA. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, p. 1-6 6 p. (IEEE International Conference on Prognostics and Health Management).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  75. Published

    Evaluating the structural complexity of a product family

    Rissanen, N., Malmqvist, J. & Pulkkinen, A., 2012, The 12th International Design Conference, DESIGN 2012, 21-24 May, 2012, Dubrovnik, Croatia. Dorian, M., Mario, S., Neven, P. & Nenad, B. (eds.). Zagreb: Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, p. 1597-1604 (International Design Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  76. Published

    Evaluation of the teaching of a simple theory through different teaching disciplines

    Saarenrinne, P., 2012, ICERI2012 Proceedings, 5th International Conference of Education, Research and Innovation 19.-21.11.2012, Madrid, Spain. Barcelona: International Association of Technology, Education and Development IATED, p. 939-942 (International Conference of Education, Research and Innovation).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  77. Published

    Extrusion-coated sealing layers on ALD-Al2O3 coated polymer substrate: Interfacial and Adhesion properties

    Lahtinen, K., Johansson, P., Kääriäinen, T., Cameron, D. C. & Kuusipalo, J., 2012, TAPPI PLACE Conference 2012: Helping Me Do My Job Better, 6-9 May 2012, Seattle, WA, United States. p. 543-562 20 p. (TAPPI European PLACE Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  78. Published

    Factors affecting to exploitation of modularity

    Lehtinen, J., Lehtonen, T., Juuti, T. & Riitahuhta, A., 2012, Proceedings of The Ninth Norddesign Conference 2012, 22-24 August, 2012, Aalborg, Denmark. Poul, K. H. J. R., Kaj, J. & Christian, T. (eds.). Aalborg, Denmark: Aalborg university, p. 1-10 10 p. (Norddesign conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  79. Published

    Flexible gripper system for small optical assemblies - final tests and findings

    Prusi, T., Heikkilä, R., Ha, T. H., Song, J. Y., Lee, C. W. & Tuokko, R., 2012, Precision assembly technologies and systems. Proceedings of the 6th IFIP WG 5.5 International precision assembly seminar, IPAS 2012, 12-14 February, 2012, Chamonix, France. Svetan, R. (ed.). Heidelberg: Springer, p. 55-64 (IFIP Advances in Information and Communication Technology; vol. 371).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  80. Published

    Formal modelling of complex event processing: a generic algorithm and its application to a manufacturing line

    Ahmad, W., Lobov, A. & Martinez Lastra, J. L., 2012, Proceedings of IEEE 10th International Conference on Industrial Informatics, INDIN 2012, 25-27 July, 2012, Beijing, China. Piscataway, NJ: IEEE, p. 380-385 (IEEE International Conference on Industrial Informatics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  81. Published

    Free shape paths in industrial robots

    Gonzalez Moctezuma, L. E., Lobov, A. & Martinez Lastra, J. L., 2012, Proceedings of the 38th Annual Conference of the IEEE Industrial Electronics Society, IECON 2012, 25-28 October, 2012, Montreal, Quebec, Canada. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, p. 3739-3743 (Annual Conference of the IEEE Industrial Electronics Society).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  82. Published

    Fretting fatigue of quenched and tempered steel in contact with bronze

    Hintikka, J., Lehtovaara, A. & Mäntylä, A., 2012, 15th Nordic Symposium on Tribology, NordTrib 2012, 12-15 June 2012, Trondheim, Norway. Trondheim: NTNU Norwegian University of Science and Technology, p. 1-6 6 p. (Nordic Symposium on Tribology).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  83. Published

    From measurements data to information

    Krogerus, T., 2012, GIM - Generic Intelligent Machines, Proceedings of the 6th GIM Scientific Workshop , November 7-8, 2012, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). Tampere: Tampere University of Technology. Department of Intelligent Hydraulics and Automation, p. 51-62 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  84. Published

    Full-Field-menetelmä käänteisessä monitoroinnissa

    Miettinen, J. & Ojala, P., 2012, In : Promaint. 26, 5, p. 34-38

    Research output: Contribution to journalArticleProfessional

  85. Published

    Fundamentals of Digital Microhydraulic

    Linjama, M., 2012, Proceedings of the 8th International Fluid Power Conference, Dresden, March 26-28, 2012. Dresden: Technische Universität Dresden, Institute of Fluid Power, p. 385-396 (International Fluid Power Conference; vol. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  86. Published

    Glass tempering modeling

    Schneider, J., Karvinen, R. & Nielsen, J., 2012, COST Training School "Structural Glass", Presentation Handouts, Ghent University, Ghent, Belgium, April 2-6, 2012. University Press BVBA, p. 281-309 (COST Action TU0905 "Structural Glass - Novel Design Methods and Next Generation Products").

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  87. Published

    Hydrauliikan aika ei ole ohi - The time of hydraulics is not over

    Linjama, M., 2012, In : Fluid Finland. 11, 2, p. 10-12

    Research output: Contribution to journalArticleProfessional

  88. Published

    IHA:n KompuNW-testipenkillä tehtyjä mittauksia

    Pekkonen, J., Elo, L., Kuosku, M. & Rinkinen, J., 2012, KompuNW -verkostoseminaari TTY:ssa 9.10.2012. Tampere: Tampere University of Technology, IHA - Department of Intelligent Hydraulics and Automation, p. 1-16 16 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  89. Published

    Implementation of a digital hydraulic valve system with Bosch Rexroth sec valves

    Ketonen, M., 2012, DFP 12, Proceedings of the fifth workshop on digital fluid power, October 24-25, 2012, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). Tampere: Tampere University of Technology. Department of Intelligent Hydraulics and Automation, p. 161-174 (Workshop on digital fluid power).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  90. Published

    Improvement of Quality of tempered Glass with Numerical Modeling

    Aronen, A. & Karvinen, R., 2012, Challenging Glass 3, Conference on Architectural and Structural Applications of Glass, 28-29 June 2012, Delft, The Netherlands. Bos, F., Louter, C., Nijsse, R. & Veer, F. (eds.). Amsterdam, The Netherlands: IOS Press, p. 363-372 (Conference on Architectural and Structural Applications of Glass).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  91. Published

    Improving damping characteristics of displacement controlled digital hydraulic system

    Heikkilä, M. & Linjama, M., 2012, DFP 12, Proceedings of the fifth workshop on digital fluid power, October 24-25, 2012, Tampere, Finland. Laamanen, A. & Linjama, M. (eds.). Tampere: Tampere University of Technology. Department of Intellidgent Hydraulics and Automation, p. 75-88 (Workshop on digital fluid power).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  92. Published

    Improving energy efficiency and productivity of existing hydraulic systems by retrofittable digital hydraulics

    Ketonen, M., 2012, GIM - Generic Intelligent Machines, Proceedings of the 6th GIM Scientific Workshop, November 7-8, 2012, Tampere, Finland. Huhtala, K. & Uusi-Heikkilä, J. (eds.). Tampere: Tampere University of Technology. Department of Intelligent Hydraulics and Automation, p. 63-66 (GIM Scientific Workshop).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  93. Published

    Improving manufacturing process sustainability and performance with technology change

    Koho, M., Kirman, B., Tapaninaho, M., Nylund, H. & Torvinen, S., 2012, The 10th Global Conference on Sustainable Manufacturing, GCSM 2012, 31 October - 2 November, 2012, Istanbul, Turkey. Seliger, G. & Kylyc, S. E. (eds.). GCSM, p. 754-758 (Global Conference on Sustainable Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  94. Published

    Is the future of fluid power digital?

    Scheidl, R., Linjama, M. & Schmidt, S., 2012, In : Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering. 226, 6, p. 721-723

    Research output: Contribution to journalArticleScientificpeer-review

  95. Published

    Käyttövarmuuden hallinta - standardista käytäntöön

    Ahonen, T., Jännes, J., Kunttu, S., Valkokari, P., Venho-Ahonen, O., Välisalo, T., Ellman, A., Hietala, J-P., Multanen, P., Mäkiranta, A., Saarinen, H. & Franssila, H., 2012, Espoo: VALTION TEKNILLINEN TUTKIMUSKESKUS. 73 p. (VTT Technology; vol. 69)

    Research output: Book/ReportCommissioned reportProfessional

  96. Published

    Käyttövarmuussuunnittelun kehittämistarpeet

    Valkokari, P., Ahonen, T., Franssila, H., Itäsalo, A., Jännes, J., Välisalo, T. & Ellman, A., 2012, Espoo: VALTION TEKNILLINEN TUTKIMUSKESKUS. 52 p. (VTT Working Papers; vol. 180)

    Research output: Book/ReportCommissioned reportProfessional

  97. Published

    Käyttövarmuustiedon hallinta ja hyödyntäminen suunnittelussa

    Franssila, H., Kunttu, S., Saarinen, H. & Valkokari, P., 2012, Espoo: VALTION TEKNILLINEN TUTKIMUSKESKUS. 47 p. (VTT Technology; vol. 48)

    Research output: Book/ReportCommissioned reportProfessional

  98. Published

    Key performance indicators for energy efficient asset management in a factory automation testbed

    Zhang, B., Postelnicu, C. & Martinez Lastra, J. L., 2012, Proceedings of IEEE 10th International Conference on Industrial Informatics, INDIN 2012, 25-27 July, 2012, Beijing, China. Piscataway: Institute of Electrical and Electronics Engineers IEEE, p. 391-396 (International Conference on Industrial Informatics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  99. Published

    Kitkaväsymisen tuomat haasteet

    Juoksukangas, J. & Lehtovaara, A., 2012, In : Materia. 70, 5, p. 56-57

    Research output: Contribution to journalArticleProfessional

  100. Published

    Kokemuksia inline- ja online-mittauksista - ISO/SAE -standardit

    Elo, L., Pekkonen, J. & Rinkinen, J., 2012, KompuNW -verkostoseminaari TTY:ssa 9.10.2012. Tampere: Tampere University of Technology, IHA - Department of Intelligent Hydraulics and Automation, p. 1-13 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  101. Published

    Komponentin ja järjestelmän elinkaaren mallintaminen analyyttisillä menetelmillä

    Aaltonen, J., 2012, Hydraulijärjestelmien modernisointi, 21.-22.3.2012, Suomen ilmailumuseo, Vantaa, Kunnossapitoyhdistys. Helsinki: Kunnossapitoyhdistys ProMaint, p. 1-9 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

Previous 1 2 3 4 5 6 7 8 ...13 Next
Download list To download, please limit the number of search results to 1,000 or less.