Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. 2013
  2. Published

    Semantic information management for user and context aware smart home with social services

    Evchina, Y., Dvoryanchikova, A. & Martinez Lastra, J. L., 2013, 3rd IEEE International Multi-Disciplinary Conference on Cognitive Methods in Situation Awareness and Decision Support (CogSIMA), February 26-28, 2013, San Diego, CA, USA. Piscataway: Institute of Electrical and Electronics Engineers IEEE, p. 262-268 7 p. (International Multi-Disciplinary Conference on Cognitive Methods in Situation Awareness and Decision Support).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  3. Published

    Semantics-Based Composition of Factory Automation Processes Encapsulated by Web Services

    Puttonen, J., Lobov, A. & Martinez Lastra, J. L., 2013, In : IEEE Transactions on Industrial Informatics. 9, 4, p. 2349-2359 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  4. Published

    Simulation of residual stresses and deformations in electron beam-welded copper canisters

    Aronen, A., Leikko, J., Taskinen, P. & Karvinen, R., 2013, Olkiluoto: Posiva. 68 p. (Posiva Working Report; no. 20)

    Research output: Book/ReportCommissioned reportProfessional

  5. Published

    Sliding wear of HVOF sprayed self-fluxing alloy matrix cermet particles reinforced composite coatings

    Surzhenkov, A., Antonov, M., Mikli, V., Latokartano, J., Vilgo, T. & Kulu, P., 2013, BALTTRIB´2013, VII International scientific conference, Aleksandras Stulginskis University, Kaunas, Lithuania, 14-15 November 2013. Padgurskas, J., Rukuiza, R., Kreivaitis, R. & Jankauskas, V. (eds.). p. 62-66 5 p. (Proceedings of the international conference BALTTRIB).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  6. Published

    Sliding wear of TiC-NiMo and Cr3C2-Ni cermet particles reinforced FeCrSiB matrix HVOF sprayed coatings

    Surzhenkov, A., Antonov, M., Goljandin, D., Vilgo, T., Mikli, V., Viljus, M., Latokartano, J. & Kulu, P., 2013, In : Estonian Journal of Engineering. 19, 3, p. 203-211 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  7. Published

    Smart lighting in multipurpose outdoor environments: energy efficient solution using network of cooperating objects

    Florea, A., Farahat, A., Postelnicu, C., Martinez Lastra, J. L. & Azcondo Sanchez, F. J., 2013, Proceedings of 4th international workshop on networks of cooperating objects for smart cities 2013 (CONET/UBICITEC 2013), Philadelphia, USA, April 8, 2013. Fortino, G., Karnouskos, S., Marron, P. J. & Martinez Lastra, J. L. (eds.). CEUR-WS.org, p. 1-13 13 p. (CEUR Workshop Proceedings; vol. 1002).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  8. Published

    Social Media in Manufacturing: Just Hype or Concrete Benefits?

    Lanz, M. & Torvinen, S., 2013, 23rd International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 13, The challenge of sustaining global competitive manufacturing system, 26-28 June 2013 Porto Portugal, Advances in Sustainable and Competitive Manufacturing Systems. Azevedo, A. (ed.). Switzerland: Springer International Publishing, p. 1023-1034 (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  9. Published

    Stability Analysis of Two Time Delays in Cylindrical Grinding Machine by D-subdivion Method

    Mehmood, F., Yuan, L., Järvenpää, V-M. & Heshmatimanesh, F., 2013, Proceedings in Research Conference in Technical Disciplines, RCITD 2013, 18.-22. November 2013, Slovak Republic. Mokrys, M., Badura, S. & Lieskovsky, A. (eds.). Zilina: EDIS, p. 53-57 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  10. Published

    Stable and high performance energy-efficient motion control of electric load sensing controlled hydraulic manipulators

    Koivumäki, J. & Mattila, J., 2013, Proceedings of ASME/BATH 2013 Symposium on Fluid Power and Motion Control, FPMC2013, October 6-9, 2013, Sarasota, Florida. Sarasota, Florida, USA: ASME, p. 1-10 10 p. (Symposium on Fluid Power and Motion Control).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  11. Published

    Stress raising in laser clad components depending on geometry and defects

    Kaplan, A. F. H., Alam, M. M., Tuominen, J., Vuoristo, P., Miettinen, J., Poutala, J., Näkki, J., Junkula, J., Peltola, T. & Barsoum, Z., 2013, The 14th Nordic Laser Materials Processing Conference, NOLAMP 14, August 26th - 28th 2013, Gothenburg, Sweden. Kaplan, A. & Engström, H. (eds.). Luleå: Luleå University of Technology, Department of Engineering Sciences and Mathematics, p. 281-292 12 p. (Nordic Laser Materials Processing Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  12. Published

    Super-FRS target area remote handling: Scenario and development

    Orona, L. M., Weick, H., Mattila, J., Amjad, F., Kozlova, E., Karagiannis, C., Behr, K-H. & Winkler, M., 2013, In : international Journal of Advanced Robotic Systems. 10, p. 1-9 9 p., 386.

    Research output: Contribution to journalArticleScientificpeer-review

  13. Published

    Surface pore initiated fatigue failure in laser clad components

    Alam, M. M., Powell, J., Kaplan, A. F. H., Tuominen, J., Vuoristo, P., Miettinen, J., Poutala, J., Näkki, J., Junkala, J. & Peltola, T., 2013, In : Journal of Laser Applications. 25, 3, p. 032004/1-6 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  14. Published

    Survey on Remote Handling Logistics for Super-FRS Regular Paper

    Amjad, F., Weick, H., Mattila, J., Orona, L. M., Kozlova, E., Winkler, M., Behr, K-H. & Karagiannis, C., 2013, In : international Journal of Advanced Robotic Systems. 10, p. 1-14 14 p., 348.

    Research output: Contribution to journalArticleScientificpeer-review

  15. Published

    Sustainability performance indicators for supporting the realization of sustainable and energy-efficient manufacturing

    Tapaninaho, M., Koho, M., Nylund, H., Heilala, J. & Torvinen, S., 2013, 23rd International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 13, The challenge of sustaining global competitive manufacturing system, 26-28 June 2013 Porto Portugal, Advances in Sustainable and Competitive Manufacturing Systems. Azevedo, A. (ed.). Springer International Publishing, p. 1677-1688 12 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  16. Published

    Täältä pesee - Hydraulikomponenttien pesukoneet ja nesteet kuntoon

    Elo, L., Kuosku, M. & Rinkinen, J., 2013, In : Promaint. 27, 5, p. 42-45 4 p.

    Research output: Contribution to journalArticleProfessional

  17. Published

    Talotekniikka

    Kalema, T. & Joutsi, J., 2013, Tampere: Tampereen teknillinen yliopisto. 6 p. (Tampereen teknillinen yliopisto. Rakennustekniikan laitos. Rakennustuotanto ja -talous. Raportti; vol. 14)

    Research output: Book/ReportCommissioned reportProfessional

  18. Published

    Test bench for measuring technical cleanliness of assembled fluid power components

    Pekkonen, J., Elo, L., Kuosku, M. & Rinkinen, J., 2013, The Tenth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, CM2013/MFPT2013, 18-20 June 2013, Krakow, Poland. Coxmoor Publishing, p. 1-13 13 p. (International Conference on Condition Monitoring and Machinery Failure Prevention Technologies).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  19. Published

    The Automation of Multi Degree of Freedom Hydraulic Crane by Using Virtual Decomposition Control

    Koivumäki, J. & Mattila, J., 2013, 2013 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM 2013, Mechatronics for Human Wellbeing, July 9-12, 2013, Wollongong, Australia. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, p. 912-919 8 p. (IEEE/ASME International Conference on Advanced Intelligent Mechatronics).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  20. Published

    The effect of contact edge geometry on fretting fatigue behavior in complete contacts

    Juoksukangas, J., Lehtovaara, A. & Mäntylä, A., 2013, In : Wear. 308, 1-2, p. 206-212 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  21. Published

    The effect of microstructure and lead content on the tribological properties of bearing alloys

    Ruusila, V., Nyyssönen, T., Kallio, M., Vuorinen, P., Lehtovaara, A., Valtonen, K. & Kuokkala, V-T., 2013, In : Proceedings of the institution of Mechanical Engineers Part J: Journal of Engineering Tribology. 227, 8, p. 878-887 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  22. Published

    The module system and its requirements for PDM/PLM systems

    Pakkanen, J., Lehtinen, J., Juuti, T. & Lehtonen, T., 2013, Proceedings of the PDM2013 conference, The 1st PDM Forum for Finland-Russia Collaboration, 24.-25.4.2013, Lappeenranta. Huhtala, M. & Eskelinen, H. (eds.). Lappeenranta: Lappeenranta University of Technology, p. 91-97 7 p. (LUT Scientific and Expertise Publications. Tutkimusraportit; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  23. Published

    Time-critical cooperative path following of multiple unmanned aerial vehicles over time-varying networks

    Xargay, E., Kaminer, I., Pascoal, A., Hovakimyan, N., Dobrokhodov, V., Cichella, V., Aguiar, A. P. & Ghabcheloo, R., 2013, In : Journal of Guidance Control and Dynamics. 36, 2, p. 499-516 18 p.

    Research output: Contribution to journalArticleScientificpeer-review

  24. Published

    Tribological behavior of bronze alloys with solid lubricants

    Kallio, M., Vuorinen, P., Fluentes, E., Marana, O., Ruusila, V., Nyyssönen, T., Kuokkala, V-T. & Lehtovaara, A., 2013, In : Key Engineering Materials. 527, p. 205-210 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  25. Published

    TUT-Microfactory – A small-size, modular and sustainable production system

    Järvenpää, E., Heikkilä, R. & Tuokko, R., 2013, Proceedings of 11th Global Conference on Sustainable Manufacturing GCSM - Innovative Solutions, Berlin, Germany, 23rd-25th September, 2013. Seliger, G. (ed.). Berlin: Technische Universität Berlin, p. 79-84 6 p. (Global Conference on Sustainable Manufacturing).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  26. Published

    URB-Grade: Plataforma software para la ayuda a la toma de decisiones correctoras de eficiencia energetica

    Larranaga Negro, M., Martinez Lastra, J. L., Colino, A. & Marquez Contreras, J. A., 2013, III Congreso de servicios energeticos, ESES comunicaciones, Bilbao, 1 y 2 octubre 2013, Palacio Euskalduna. Editorial tecnica el instaldor, p. 291-296 6 p. (Congreso de servicios energeticos).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  27. Published

    Uudenlaista kuormantuntotekniikkaa

    Pihlajamäki, T. & Luomaranta, M., 2013, In : Fluid Finland. 12, 1, p. 12-15 4 p.

    Research output: Contribution to journalArticleProfessional

  28. Published

    Value of virtual prototyping - a strategic resource besed view

    Leino, S-P. S., Koivisto, T. & Riitahuhta, A., 2013, Proceedings of The 19th International Conference on Engineering Design ICED13, Design for Harmonies, Vol 4: Product, Service and Systems Design, 19th-22nd August 2013 Sungkyunkwan University Seoul, Korea. Lindemann, U., Venkataraman, S., Kim, Y. S., Lee, S. W., de Weck, O. & Hong, Y. S. (eds.). Scotland: The Design Society, p. 249-258 10 p. (International Conference on Engineering Design).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  29. Published

    Ventilation and indoor air quality in school buildings

    Kalema, T. & Viot, M., 2013, Sisäilmastoseminaari 2013, Messukeskus, Helsinki 13.3.2013. Säteri, J. & Backman, H. (eds.). SIY Sisäilmayhdistys ry, p. 91-96 6 p. (SIY Raportti; no. 31).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  30. Published

    Virtuaalinen konelaboratorio ja semanttinen mallinnus konejärjestelmän suunnittelun tukena, Loppuraportti, Semogen II -hanke

    Nykänen, O., Koskinen, K. T., Ranta, P., Salonen, J., Aaltonen, J., Nurmi, J., Helminen, M., Alarotu, V., Salomaa, T. & Pohjolainen, S., 2013, Tampere: Tampereen teknillinen yliopisto, Smart Simulators -tutkimusryhmä. 50 p.

    Research output: Book/ReportCommissioned reportProfessional

  31. Published

    Visualization of Information in a Service-Oriented Production Control System

    Lee, N. A. N., Moctezuma, L. E. G. & Lastra, J. L. M., 2013, 39th Annual Conference of the IEEE Industrial Electronics Society, IECON 2013, 10-13 November, 2013, Vienna, Austria. Piscataway, NJ: IEEE, p. 4422-4428 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  32. Published

    Weighting function selection problem in the Galerkin method

    Salonen, E-M., Kouhia, R. & Holopainen, R., 2013, In : International Journal of Mechanical Engineering Education. 41, 2, p. 115-135 21 p.

    Research output: Contribution to journalArticleScientificpeer-review

  33. Published

    Workers' tacit knowledge transferred to conceptual design: the case of mobile work machine

    Tiainen, T., Ellman, A. & Kaapu, T., 2013, Co-Create 2013, The Boundary-Crossing Conference on Co-Design in Innovation. Smeds, R. & Irrmann, O. (eds.). Aalto University School of Science, Department of Industrial Engineering and Management, SimLab, p. 709-720 12 p. (Aalto University publication series SCIENCE + TECHNOLOGY; vol. 15, no. 2013).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  34. 2014
  35. Published

    A case study of share of ICT infrastructure in energy consumption of discrete manufacturing facility

    Sohail, M., Florea, A. & Martinez Lastra, J. L., 2014, 2014 IEEE 15th Workshop on Control and Modeling for Power Electronics (COMPEL), 22-25 Junen 2014, University of Cantabria, Santander, Spain. Piscataway: The Institute of Electrical and Electronics Engineers IEEE, p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  36. Published

    A Continuum damage model based on Ottosen's four parameter failure criterion for concrete

    Tahaei Yaghoubi, S., Kouhia, R., Hartikainen, J. & Kolari, K., 2014, In : Rakenteiden mekaniikka. 47, 2, p. 50-66 17 p.

    Research output: Contribution to journalArticleScientificpeer-review

  37. Published

    A Continuum damage model for quasi-brittle materials

    Yaghoubi, S. T., Kouhia, R., Hartikainen, J. & Kolari, K., 2014, Proceedings of NSCM-27: the 27th Mechanics Nordic Seminar on Computational Mechanics. Eriksson, A., Kulachenko, A., Mihaescu, M. & Tibert, G. (eds.). Stockholm: KTH Mechanics, p. 160-163 4 p. (TRITA-MEK Technical report; no. 24).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  38. Published

    Activity report of COST Action TU0905 Working Group 2 – Material characterization and material improvement

    Schneider, J., Karvinen, R., Vandebroek, M. & Savineau, G., 2014, Proceedings volume of the Challenging Glass 4 & COST Action TU0905 Final Conference, 6-7 February 2014 at the EPFL in Lausanne, Switzerland. Louter, C., Bos, F., Belis, J. & Lebet, J-P. (eds.). CRC Press, p. 21-24 4 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  39. Published

    A hydraulic cylinder model for multibody simulations

    Ylinen, A., Marjamäki, H. & Mäkinen, J., 2014, In : Computers & Structures. 138, p. 62-72 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  40. Published

    A Macro-Micro Controller for Pallet Picking by an Articulated-frame-steering Hydraulic Mobile Machine

    M. Aref, M., Ghabcheloo, R. & Mattila, J., 2014, 2014 IEEE International Conference on Robotics and Automation (ICRA), May 31 - June 7, 2014, Hong Kong, China. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, p. 6816-6822 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  41. Published

    A model for scheduling of employees using supplier selection

    Holopainen, S., 2014, Engineering optimization IV, Proceedings of the International Conference on Engineering Optimiztion (ENGOPT 2014), Lisbon, Portugal, 8-11 September 2014. Rodrigues, H. C., Herskovits, J., Mota Soares, C. M., Guedes, J. M., Araújo, A. L., Folgado, J. O., Moleiro, F. & Madeira, J. F. A. (eds.). The Netherlands: CRC Press/Balkema, p. 533-538 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  42. Published

    Analysis of Real-Time Properties of a Digital Hydraulic Power Management System

    Boström, P., Alexeev, P., Heikkilä, M., Huova, M., Waldén, M. & Linjama, M., 2014, 19th International Conference, FMICS 2014, Florence, Italy, September 11-12, 2014.. Springer International Publishing, p. 33-47 15 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  43. Published

    Analysis of signals and power flow in a digital hydraulic multi actuator application

    Karvonen, M., Heikkilä, M., Linjama, M. & Huhtala, K., 2014, 8th FPNI Ph.D Symposium on Fluid Power, FPNI2014, June 11-13, 2014, Lappeenranta, Finland. The American Society of Mechanical Engineers ASME, p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  44. Published

    Anisotropic viscodamage-viscoplastic consistency constitutive model with a parabolic cap for rocks with brittle and ductile behavior

    Saksala, T. & Ibrahimbegovic, A., 2014, In : International Journal of Rock Mechanics and Mining Sciences. 70, p. 460-473 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  45. Published

    A packet scheduler for real-time 6LoWPAN wireless networks in manufacturing systems

    Santillan Martinez, G., Delamer, I. M. & Martinez Lastra, J. L., 2014, In : Journal of Intelligent Manufacturing. 10845, 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  46. Published

    Application of Design Review to Probabilistic Risk Assessment in a Large Investment Project

    Virtanen, S., Penttinen, J-P., Kiiski, M. & Jokinen, J., 2014, Proceedings of the Probabilistic Safety Assessment and Management PSAM12, June 2014, Honolulu, Hawaii. p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  47. Published

    A Semi-Fidelity Training Simulator: Promising Opportunities for Student-Centered Learning

    Kaapu, T., Tiainen, T. & Ellman, A., 2014, Proceedings of the 22nd European Conference on Information Systems, ECIS 2014, June 9-11, 2014,Tel Aviv. 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  48. Published

    Aspects of the energy consumption of a digital hydraulic power management system supplying a digital and proportional valve controlled multi actuator system

    Karvonen, M., Heikkilä, M., Tikkanen, S., Linjama, M. & Huhtala, K., 2014, ASME/BATH 2014 Symposium on Fluid Power and Motion Control, FPMC2014, September 10-12, 2014, Bath, United Kingdom. The American Society of Mechanical Engineers ASME, p. 1-9 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  49. Published

    Assistive Obstacle-Free Path Planning in the Image Space for Teleoperation Tasks Using Monocular Camera

    Ziaei, Z., Oftadeh, R. & Mattila, J., 2014, 18th International Conference on System Theory, Control and Computing, ICSTCC 2014, October 17-19, 2014, Sinaia, Romania. Piscataway, NJ: Institute of Electrical and Electronics Engineers IEEE, p. 838-844 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  50. Published

    Augmented reality aiding collimator exchange at the LHC

    Martinez, H., Fabry, T., Laukkanen, S., Mattila, J. & Tabourot, L., 2014, In : Nuclear instruments and Methods in Physics Research Section A: Accelerators Spectrometers Detectors and Associated Equipment. 763, p. 354-363 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  51. Published

    Automaattinen öljyn epäpuhtauksien mittaus ja keskeiset standardit

    Multanen, P., Niiranen, E., Elo, L. & Rinkinen, J., 2014, PAMAS 2014 Käyttäjäpäivä, 4.2.2014, Tampereen teknillinen yliopisto, Tampere. Rinkinen, J., Multanen, P., Elo, L. & Niiranen, E. (eds.). Tampere: Tampereen teknillinen yliopisto, p. 43-70 28 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  52. Published

    CFD based on-line process analysis - applied to circulating and bubbling fluidized bed processes

    Kallio, S., Saarenrinne, P., Peltola, J., Tähtinen, M., Saxén, H., Kärkkäinen, T., Niemi, T., Karvonen, L., Nevalainen, H., Elfvengren, J., Kolehmainen, J., Hermanson, A., Mondal, D. & Maslov, A., 2014, Espoo: VTT. 43 p. (Research report VTT-R; no. 04576-14)

    Research output: Book/ReportCommissioned reportProfessional

  53. Published

    Champion-työkalut: Fasilitoijan ohjeet. Mestariluokan työkalut hankkeiden valmisteluun ja toteuttamiseen

    Juuti, T., Kopra, M-J., Halonen, N. & Tapaninaho, M., 2014, Tampere: Tampereen teknillinen yliopisto. Kone- ja tuotantotekniikan laitos. 80 p.

    Research output: Book/ReportBookProfessional

  54. Published

    CO-Based Outdoor Smart Lighting for Energy Aware Factory

    Florea, A., Farahat, A., Postelnicu, C., Martinez Lastra, J. L. & Azcondo Sánchez, F. J., 2014, Internet of Things Based on Smart Objects. Fortino, G. & Trunfio, P. (eds.). Springer International Publishing, p. 69-83 15 p. (Internet of Things).

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  55. Published

    Comparison of proportional control and displacement control using digital hydraulic power management system

    Heikkilä, M., Karvonen, M., Linjama, M., Tikkanen, S. & Huhtala, K., 2014, ASME/BATH 2014 Symposium on Fluid Power and Motion Control, FPMC2014, September 10-12, 2014, Bath, United Kingdom. The American Society of Mechanical Engineers ASME, p. 1-8 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  56. Published

    Concerns over students role as test users in virtual environments

    Tiainen, T. & Ellman, A., 2014, Proceedings of the 18th Academic MindTrek Conference 2014 "Media business, management, content & services" 4-6 November, 2014, Tampere, Finland. Lugmayr, A., Franssila, H. & Paavilainen, J. (eds.). New York, NY: The Association for Computing Machinery, p. 11-18 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  57. Published

    Constrained Path Optimization with Bézier Curve Primitives

    Choi, J-W. & Huhtala, K., 2014, 2014 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2014), September 14-18, 2014, Palmer House Hilton, Chicago, IL, USA. Institute of Electrical and Electronics Engineers IEEE, p. 246-251 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  58. Published

    Delay excited vibrations in grinding wheel rotor system

    Järvenpää, V-M. & Yuan, L., 2014, Proceedings of the 21st International Congress on Sound and Vibration, In Depth Sound and Vibration Research 2014, ICSV21, 13-17 July, 2014, Beijing, China. Crocker, M. J., Pawelczyk, M. & Tian, J. (eds.). International Institute of Acoustics and Vibration (IIAV), p. 2437-2444 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  59. Published

    Deriving Efficient and Dependable Parallel Programs from Simulink Models

    Ostroumov, S., Boström, P., Waldén, M. & Huova, M., 2014, Turku: TURKU CENTRE FOR COMPUTER SCIENCE. 38 p. (TUCS Technical Report; no. 1111)

    Research output: Book/ReportCommissioned reportProfessional

  60. Published

    Design driven world of cellulose-from bulk to luxury?

    Qvintus, P., Kataja, K., Heikkilä, P., Salmela, J., Lehmonen, J., Ketoja, J., Hänninen, T., Harlin, A., Härkäsalmi, T., Vuorinen, J. & Vuorinen, T., 2014, Fibre Value Chain Conference and Expo 2014: Pulp and Paper Bioenergy Bioproducts. Appita Inc., p. 67-74 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  61. Published

    Design reasoning patterns in NPD education design

    Juuti, T., Lehtonen, T., Rättyä, K., Halonen, N., Vanhatalo, M. & Kujansuu, P., 2014, Proceedings of 16th International Conference on Engineering and Product Design Education, University of Twente, Enschede, The Netherlands 4th-5th September 2014. Bohemia, E., Eger, A., Eggink, W., Kovacevic, A., Parkinson, B. & Wits, W. (eds.). The Design Society, p. 682-687 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  62. Published

    Design synthesis: integrated product and manufacturing system design

    Britton, G. & Torvinen, S., 2014, CRC Press. 358 p.

    Research output: Book/ReportBookScientificpeer-review

  63. Published

    Developed measuring methods for hydraulic fluid dynamics and viscosity at extreme pressures and temperatures

    Karjalainen, J-P., Karjalainen, R. & Huhtala, K., 2014, ASME/BATH 2014 Symposium on Fluid Power and Motion Control, FPMC2014, September 10-12, 2014, Bath, United Kingdom. The American Society of Mechanical Engineers ASME, p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  64. Published

    Digital Hydraulics Applied Research - Marine Hydraulics

    Mäkinen, E., Kukkonen, S. & Perukangas, M., 2014, Tampere: FIMECC Oy. 3 p. (FIMECC Publications Series; no. 2)

    Research output: Book/ReportCommissioned reportProfessional

  65. Published

    Digital Hydraulic System

    Sipola, A., Vihtanen, H-P., Linjama, M. & Laamanen, A., 2014, Patent No. Australian Patent Office, AU 2009300985 B2, Priority date 8 May 2014, Priority No. (31) 20085958 : (21) 2009300985

    Research output: PatentScientific

  66. Published

    Digital Microhydraulics

    Laamanen, A. & Linjama, M., 2014, Tampere: FIMECC Oy. 4 p. (FIMECC Publications Series; no. 2)

    Research output: Book/ReportCommissioned reportProfessional

  67. Published

    Dynamics of ice milling and breaking during arctic ship steering operations

    Keskinen, E., Montonen, J., Sharma, N. & Cotsaftis, M., 2014, Proceedings of the ASME 2014, 12th Biennial Conference on Engineering Systems Design and Analysis, ESDA2014, June 25-27, 2014, Copenhagen, Denmark. The American Society of Mechanical Engineers ASME, p. 1-7 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  68. Published

    Easurement of solids velocity and concentration in a large cold CFB model

    Peltola, J., Karvonen, L., Elfvengren, J., Kolehmainen, J., Kallio, S., Pallares, D. & Johnsson, F., 2014, CFB-11: Proceedings of the 11th International Conference on Fluidized Bed Technology, Beijing, China, 14-17 May 2014. p. 589-594

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  69. Published

    Editorial of special issue Telerobotics and systems engineering for scientific facilities

    Ferre, M. (ed.), Mattila, J. (ed.), Siciliano, B. (ed.) & Bonnal, P. (ed.), 2014, InTech Open Access Publisher. 1 p. (International journal of advanced robotic systems; vol. 11)

    Research output: Book/ReportAnthologyScientificpeer-review

  70. Published

    Effect of Temperature on Fume Formation and Deposition in Kraft Recovery Boilers - a Modeling Approach

    Leppänen, A., Tran, H., Välimäki, E. & Oksanen, A., 2014, 2014 International Chemical Recovery Conference, Proceedings - Volume 2. Nieminen, M. & Lampinen, P. (eds.). Suomen Soodakattilayhdistys, The Finnish Recovery Boiler Committee; TAPPI, p. 38-47 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  71. Published

    Electro hydraulic gas exchange valve actuation of 4-stroke large bore diesel engine

    Herranen, M. & Huhtala, K., 2014, 8th FPNI Ph.D Symposium on Fluid Power, FPNI2014, June 11-13, 2014, Lappeenranta, Finland. The American Society of Mechanical Engineers ASME, p. 1-11 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  72. Published

    Energy efficient outdoor lighting: an implementation

    Farahat, A., Florea, A., Martinez Lastra, J. L., Branas Reyes, C. & Azcondo, F. J., 2014, 2014 IEEE 15th Workshop on Control and Modeling for Power Electronics (COMPEL), 22-25 June 2014, University of Cantabria, Santander, Spain. Piscataway: The Institute of Electrical and Electronics Engineers, p. 1-5 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  73. Published

    Equal coded digital hydraulic valve system - improving tracking control with pulse frequency modulation

    Paloniitty, M., Linjama, M. & Huhtala, K., 2014, The Second International Conference on Dynamics and Vibroacoustics of Machines, September 15-17, 2014, Samara, Russia. p. 618-626 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  74. Published

    Experimental Comparisons of Sliding Mode Controlled Pneumatic Muscle and Cylinder Actuators

    Jouppila, V., Gadsden, A. S. & Ellman, A., 2014, In : Journal of Dynamic Systems, Measurement and Control: Transactions of the ASME. 136, 4, 10 p., 044503.

    Research output: Contribution to journalArticleScientificpeer-review

  75. Published

    Fatigue behavior of laser clad round steel bars

    Tuominen, J., Näkki, J., Poutala, J., Miettinen, J., Peltola, T., Vuoristo, P., Rasehorn, I., Alam, M. M. & Kaplan, A. F. H., 2014, In : Journal of Laser Applications. p. 1-10 10 p., 012006.

    Research output: Contribution to journalArticleScientificpeer-review

  76. Published

    Fuel optimal controller for hydrostatic drives: A simulation study and model validation

    Backas, J., Ghabcheloo, R., Hyvönen, M. & Huhtala, K., 2014, ASME/BATH 2014 Symposium on Fluid Power and Motion Control, FPMC2014, September 10-12, 2014, Bath, United Kingdom. The American Society of Mechanical Engineers ASME, p. 1-11 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  77. Published

    Functional failure modes cause-consequence logic suited for mobile robots used at scientific facilities

    Douzi, I. K., Virtanen, S., Bonnal, P. & Verma, A. K., 2014, In : Reliability Engineering and System Safety. 129, p. 10-18 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  78. Published

    Geometry-Aided Inversion of Manipulator Telescopic Link Length from MEMS Accelerometer and Rate Gyro Readings

    Vihonen, J., Honkakorpi, J., Mattila, J. & Visa, A., 2014, 2014 IEEE International Conference on Robotics & Automation (ICRA) Hong Kong Convention and Exhibition Center, May 31 - June 7, 2014. Hong Kong, China. Institute of Electrical and Electronics Engineers IEEE, p. 181-186 6 p. (IEEE International Conference on Robotics & Automation (ICRA)).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  79. Published

    Geometry-Aided Low-Noise Angular Velocity Sensing of Rigid-Body Manipulator Using MEMS Rate Gyros and Linear Accelerometers

    Vihonen, J., Honkakorpi, J., Koivumäki, J., Mattila, J. & Visa, A., 2014, IEEE/ASME International Conference on Advanced Intelligent Mechatronics, Besancon, France, July 8-11, 2014. Piscataway, NJ: IEEE, p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  80. Published

    Global Path Planning with Obstacle Avoidance for Omnidirectional Mobile Robot Using Overhead Camera

    Ziaei, Z., Oftadeh, R. & Mattila, J., 2014, 2014 IEEE International Conference on Mechatronics and Automation, ICMA 2014, Tianjin, China, August 3-6, 2014. Piscataway, NJ: IEEE, p. 697-704 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  81. Published

    Hermetic room temperature glass welding technology

    Lundén, H., Kumpulainen, T., Määttänen, A. & Vihinen, J., 2014, 2014 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2014 June 15-18, 2014, Washington, DC, USA. Nano Science and Technology Institute, p. 13-16 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  82. Published

    High Performance Particle Tracking Velocimetry for Fluidized Beds

    Elfvengren, J., Kolehmainen, J. & Saarenrinne, P., 2014, VISAPP 2014, Proceedings of the 9th International Conference on Computer Vision Theory and Applications , Volume 3, Lisbon, Portugal, 5-8 January, 2014. Battiato, S. & Braz, J. (eds.). SCITEPRESS, p. 441-449 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  83. Published

    Hopf bifurcation of nonlinear contact force in grinding system

    Yuan, L., Järvenpää, V-M. & Virtanen, S., 2014, Proceedings of the 21st International Congress on Sound and Vibration, In Depth Sound and Vibration Research, 2014, ICSV21, 13-17 July, 2014, Beijing, China. Crocker, M. J., Pawelczyk, M. & Tian, J. (eds.). International Institute of Acoustics and Vibration (IIAV), p. 2445-2452 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  84. Published

    Hydraulic Manipulator Virtual Decomposition Control with Performance Analysis Using Low-Cost MEMS Sensors

    Koivumäki, J., Honkakorpi, J., Vihonen, J. & Mattila, J., 2014, IEEE/ASME International Conference on Advanced Intelligent Mechatronics, Besancon, France, July 8-11, 2014. Piscataway, NJ: IEEE, p. 1-8 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  85. Published

    Hydraulijärjestelmien suunnitteluperusteet

    Huhtala, K. & Rinkinen, J., 2014, Koneenosien suunnittelu. Björk, T., Hautala, P., Huhtala, K., Kivioja, S., Kleimola, M., Lavi, M., Martikka, H., Miettinen, J., Ranta, A., Rinkinen, J. & Salonen, P. (eds.). Helsinki: Sanoma Pro Oy, p. 436-463 28 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  86. Published

    Hydraulikomponenttien puhtausvalvontastandardien tilanne 2014

    Rinkinen, J., 2014, PAMAS 2014 Käyttäjäpäivä, 4.2.2014, Tampereen teknillinen yliopisto, Tampere. Rinkinen, J., Multanen, P., Elo, L. & Niiranen, E. (eds.). Tampere: Tampereen teknillinen yliopisto, p. 157-182 26 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  87. Published

    Hydraulikomponenttien testipenkkistandardi ja mittaustuloksia

    Pekkonen, J., Elo, L., Kuosku, M. & Rinkinen, J., 2014, PAMAS 2014 Käyttäjäpäivä, 4.2.2014, Tampereen teknillinen yliopisto, Tampere. Rinkinen, J., Multanen, P., Elo, L. & Niiranen, E. (eds.). Tampere: Tampereen teknillinen yliopisto, p. 199-210 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  88. Published

    Image Based Local Strain Measurement of Wood

    Moilanen, C. S., Saarenrinne, P., Engberg, B. A. & Björkqvist, T., 2014, Advancement of Optical Methods in Experimental Mechanics Volume 3, Conference Proceedings of the Society for Experimental Mechanics Series. Jin, H., Sciammarella, C., Yoshida, S. & Lamberti, L. (eds.). Berlin: Springer, p. 339-345 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  89. Published

    Image based measurement techniques for partuculate flows

    Kolehmainen, J., 2014, Tampere: Tampere University of Technology. 98 p. (Tampere University of Technology, Publication; vol. 1258)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  90. Published

    Image Stitching Based Measurements of Medical Screws

    Cenev, Z., Prusi, T. & Tuokko, R., 2014, Precision Assembly Technologies and Systems. 7th IFIP WG 5.5 International Precision Assembly Seminar, IPAS 2014, Chamonix, France, February 16-18, 2014, Revised Selected Papers. Ratchev, S. (ed.). Springer Berlin Heidelberg, p. 69-78 10 p. (IFIP Advances in Information and Communication Technology; vol. 435).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  91. Published

    Impacts of making design decision sequence explicit on NPD project in forest machinery company

    Halonen, N., Lehtonen, T. & Juuti, T., 2014, Proceedings of 10th NordDesign 2014 Conference, Espoo, August 27-29, Aalto University. Laakso, M. & Ekman, K. (eds.). Espoo: Aalto Desingn Factory, p. 702-711 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  92. Published

    Implementing circulating oil lubrication systems based on the IMC-AESOP architecture

    Camp, R. & Lobov, A., 2014, Industrial cloud-based cyber-physical systems. The IMC-AESOP approach. Colombo, A. W., Bangemann, T., Karnouskos, S., Delsing, J., Stluka, P., Harrison, R., Jammes, F. & Martinez Lastra, J. L. (eds.). Springer, p. 183-202 20 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  93. Published

    Implementing KPIs for energy performance assessment in brownfield districts

    Florea, A., Martinez Lastra, J. L., Marquez, J. A., Colino, A., Presser, M. & Larranaga, M., 2014, Sustainable Places, October 1-3, 2014, Nice, France. 21 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  94. Published

    Improving concept design of divertor support system for FAST tokamak using TRIZ theory and AHP approach

    Di Ginorimo, G., Carfora, D., Esposito, G., Labate, C., Mozzillo, R., Renno, F., Lanzotti, A. & Siuko, M., 2014, In : Fusion Engineering and Design. 88, 11, p. 3014-3020 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  95. Published

    Improving the performance of DTP2 bilateral teleoperation control system with haptic augmentation

    Viinikainen, M., Tuominen, J., Alho, P. & Mattila, J., 2014, In : Fusion Engineering and Design. 89, 9-10, p. 2278-2282 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  96. Published

    Industrial cloud-based cyber-physical systems, The IMC-AESOP approach

    Colombo, A. W. (ed.), Bangemann, T. (ed.), Karnouskos, S. (ed.), Delsing, J. (ed.), Stluka, P. (ed.), Harrison, R. (ed.), Jammes, F. (ed.) & Martinez Lastra, J. L. (ed.), 2014, Cham: Springer. 245 p.

    Research output: Book/ReportAnthologyScientificpeer-review

  97. Published

    Influence of damage on inhomogeneous deformation behavior of amorphous glassy polymers. Modeling and algorithmic implementation in a finite element setting

    Holopainen, S., 2014, In : Engineering Fracture Mechanics. 114, p. 28-50 23 p.

    Research output: Contribution to journalArticleScientificpeer-review

  98. Published

    Influence of laser hardening to the sliding wear resistance of the PVD (Al,Ti) N-G and nACo(Registered trademark) coatings

    Surzhenkov, A., Adoberg, E., Antonov, M., Sergejev, F., Mikli, V., Viljus, M., Latokartano, J. & Kulu, P., 2014, 22nd International Baltic Conference on Engineering Materials and Tribology, BALTMATTRIB 2013; Riga Latvia; 14 November 2013 through 15 November 2013. Trans Tech Publications Ltd, p. 28-31 4 p. (Key Engineering Materials; vol. 604).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  99. Published

    Inkjet printed nano-particle Cu process for fabrication of re-distribution layers on silicon wafer

    Soltani, A., Kumpulainen, T. & Mäntysalo, M., 2014, 2014 IEEE 64th Electronic Components and Technology Conference (ECTC), 27-30 May 2014, Orlando, FL. Institute of Electrical and Electronics Engineers IEEE, p. 1685-1689 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  100. Published

    Innovative tool for specifying customer requirements

    Ellman, A., Wendrich, R. & Tiainen, T., 2014, Proceedings of the ASME 2014 International Design and Engineering Technical Conferences & Computers and Information in Engineering Conference IDECT/CIE 2014, August 17-20, 2014, Buffalo, New York, USA. p. 1-5 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  101. Published

    Interference-based overlapping particle tracking velocimetry for fluidized beds

    Kolehmainen, J., Elfvengren, J. & Saarenrinne, P., 2014, In : Experiments in Fluids. 55, 1825, p. 1-15 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  102. Published

    Issue of using students as test users - some findings in VE testing

    Tiainen, T. & Ellman, A., 2014, Proceedings of the DESIGN 2014 13th International design conference, May 19-22, 2014, Dubrovnik - Croatia. Majanovic, D., Storga, M., Pavkovic, N. & Bojcetic, N. (eds.). Croatia: Facalty of Mechanical Engineering and Naval Architecture, University of Zagreb; The Design Society, Glasgow, p. 615-622 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Previous 1...4 5 6 7 8 9 10 11 ...13 Next
Download list To download, please limit the number of search results to 1,000 or less.