Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. 2018
  2. Published

    Influence of the phosphate glass melt on the corrosion of functional particles occurring during the preparation of glass-ceramics

    Ojha, N., Laihinen, T., Salminen, T., Lastusaari, M. & Petit, L., Jun 2018, In : Ceramics International. 44, 10, p. 11807-11811

    Research output: Contribution to journalArticleScientificpeer-review

  3. Published

    Investigation of REBCO Roebel Cable Irreversible Critical Current Degradation Under Transverse Pressure

    Murtomäki, J. S., Kouhia, R., Stenvall, A., Bottura, L., Kirby, G., van Nugteren, J., DeRijk, G. & Rossi, L., Jun 2018, In : IEEE Transactions on Applied Superconductivity. 28, 4, 4802506.

    Research output: Contribution to journalArticleScientificpeer-review

  4. Published

    The effects of laser patterning 10CeTZP-Al2O3 nanocomposite disc surfaces: Osseous differentiation and cellular arrangement in vitro

    Goyos-Ball, L., Prado, C., Díaz, R., Fernández, E., Ismailov, A., Kumpulainen, T., Levänen, E., Torrecillas, R. & Fernández, A., Jun 2018, In : Ceramics International. 44, 8, p. 9472-9478

    Research output: Contribution to journalArticleScientificpeer-review

  5. Published

    Towards REBCO 20T+ Dipoles for Accelerators

    van Nugteren, J., Kirby, G., Murtomaki, J., DeRijk, G., Rossi, L. & Stenvall, A., Jun 2018, In : IEEE Transactions on Applied Superconductivity. 28, 4, 4008509.

    Research output: Contribution to journalArticleScientificpeer-review

  6. Published

    Alkali-silica reaction in Southern-Finland's bridges

    Lahdensivu, J., Köliö, A. & Husaini, D., 1 Jun 2018, In : Case Studies in Construction Materials. 8, p. 469-475 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  7. Published

    Progress on HL-LHC Nb3Sn Magnets

    Todesco, E., Annarella, M., Ambrosio, G., Apollinari, G., Ballarino, A., Bajas, H., Bajko, M., Bordini, B., Bossert, R., Bottura, L., Cavanna, E., Cheng, D., Chlachidze, G., De Rijk, G., Dimarco, J., Ferracin, P., Fleiter, J., Guinchard, M., Hafalia, A., Holik, E., Izquierdo Bermudez, S., Lackner, F., Marchevsky, M., Loeffler, C., Nobrega, A., Perez, J. C., Prestemon, S., Ravaioli, E., Rossi, L., Sabbi, G., Salmi, T., Savary, F., Schmalzle, J., Stoynev, S., Strauss, T., Tartaglia, M., Vallone, G., Velev, G., Wanderer, P., Wang, X., Willering, G. & Yu, M., 1 Jun 2018, In : IEEE Transactions on Applied Superconductivity. 28, 4, 4008809.

    Research output: Contribution to journalArticleScientificpeer-review

  8. Published

    Quench simulation results for a 12-T twin-aperture dipole magnet

    Cheng, D., Salmi, T., Xu, Q., Peng, Q., Wang, C., Wang, Y., Kong, E. & Zhang, K., 1 Jun 2018, In : Cryogenics. 92, p. 13-19 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  9. Published

    The effect of carbon and nickel additions on the precursor synthesis of Cr3C2-Ni nanopowder

    Kaunisto, K., Kotilainen, M., Karhu, M., Lagerbom, J., Vuorinen, T., Honkanen, M., Vippola, M. & Turunen, E., 1 Jun 2018, In : Ceramics International. 44, 8, p. 9338-9346

    Research output: Contribution to journalArticleScientificpeer-review

  10. Published

    Fabrication and reliability evaluation of passive UHF RFID T-shirts

    Chen, X., He, H., Ukkonen, L., Virkki, J., Lu, Y. & Lam, H., 8 Jun 2018, 2018 IEEE International Workshop on Antenna Technology, iWAT2018 - Proceedings. IEEE, p. 1-4 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  11. Published

    Manufacturing of calibration samples for barkhausen noise method: case studies on temperature controlled laser and hydrogen-oxygen flame

    Santa-aho, S., Deveci, M., Savolainen, S. & Vippola, M., 11 Jun 2018, Proceedings of the 12th ECNDT: June 11-15, Gothenburg, Sweden, 2018. 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  12. Published

    Luminescence of Er3+ doped oxyfluoride phosphate glasses and glass-ceramics

    Nommeots-Nomm, A., Boetti, N. G., Salminen, T., Massera, J., Hokka, M. & Petit, L., 30 Jun 2018, In : Journal of Alloys and Compounds. 751, p. 224-230 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  13. Published

    Directions in QPPR development to complement the predictive models used in risk assessment of nanomaterials

    Quik, J. T. K., Bakker, M., van de Meent, D., Poikkimäki, M., Dal Maso, M. & Peijnenburg, W., 1 Jul 2018, In : NanoImpact. 11, p. 58-66 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  14. Published

    Evaluation of screen printed silver trace performance and long-term reliability against environmental stress on a low surface energy substrate

    Mikkonen, R. & Mäntysalo, M., 1 Jul 2018, In : Microelectronics Reliability. 86, p. 54-65 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  15. Published

    Persistent luminescent borosilicate glasses using direct particles doping method

    Roldán Del Cerro, P., Salminen, T., Lastusaari, M. & Petit, L., 1 Jul 2018, In : Scripta Materialia. 151, p. 38-41 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  16. Published

    Fluid flow simulations meet high-speed video: Computer vision comparison of droplet dynamics

    Kulju, S., Riegger, L., Koltay, P., Mattila, K. & Hyväluoma, J., 15 Jul 2018, In : Journal of Colloid and Interface Science. 522, p. 48-56 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  17. Published

    Mechanical stress analysis during a quench in CLIQ protected 16 T dipole magnets designed for the future circular collider

    Zhao, J., Prioli, M., Stenvall, A., Salmi, T., Gao, Y., Caiffi, B., Lorin, C., Marinozzi, V., Farinon, S. & Sorbi, M., 15 Jul 2018, In : Physica C: Superconductivity and its Applications. 550, p. 27-34 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  18. Published

    Exciton localization and structural disorder of GaAs1-xBix/GaAs quantum wells grown by molecular beam epitaxy on (311)B GaAs substrates

    Prando, G. A., Orsi Gordo, V., Puustinen, J., Hilska, J., Alghamdi, H. M., Som, G., Gunes, M., Akyol, M., Souto, S., Rodrigues, A. D., Galeti, H. V. A., Henini, M., Gobato, Y. G. & Guina, M., 17 Jul 2018, In : Semiconductor Science and Technology. 33, 8, 084002.

    Research output: Contribution to journalArticleScientificpeer-review

  19. Published

    Design aspects of all atomic layer deposited TiO2–Fe2O3 scaffold-absorber photoanodes for water splitting

    Hiltunen, A., Ruoko, T-P., Iivonen, T., Lahtonen, K., Ali-Löytty, H., Sarlin, E., Valden, M., Leskelä, M. & Tkachenko, N., 31 Jul 2018, In : Sustainable Energy & Fuels. 2, 9, p. 2124-2130

    Research output: Contribution to journalArticleScientificpeer-review

  20. Published

    Processing of printed silver patterns on an ETFE substrate

    Mikkonen, R., Lahokallio, S., Frisk, L. & Mäntysalo, M., 31 Jul 2018, Proceedings - 2018 IMAPS Nordic Conference on Microelectronics Packaging, NORDPAC 2018. IEEE, p. 1-7 7 p. 8423860

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  21. Published

    Wound healing of human embryonic stem cell-derived retinal pigment epithelial cells is affected by maturation stage

    Abu Khamidakh, A. E., Rodriguez-Martinez, A., Kaarniranta, K., Kallioniemi, A., Skottman, H., Hyttinen, J. & Juuti-Uusitalo, K., 31 Jul 2018, In : BioMedical Engineering Online. 17, 1, 102.

    Research output: Contribution to journalArticleScientificpeer-review

  22. Published

    Geometry Analysis in Screen-Printed Stretchable Interconnects

    Mosallaei, M., Jokinen, J., Honkanen, M., Iso-Ketola, P., Vippola, M., Vanhala, J., Kanerva, M. & Mantysalo, M., Aug 2018, In : IEEE Transactions on Components, Packaging and Manufacturing Technology. 8, 8, p. 1344-1352

    Research output: Contribution to journalArticleScientificpeer-review

  23. Published

    Enhanced resonant nonlinear absorption and optical limiting in Er3+ ions doped multicomponent tellurite glasses

    Sajna, M. S., Perumbilavil, S., Prakashan, V. P., Sanu, M. S., Joseph, C., Biju, P. R. & Unnikrishnan, N. V., 1 Aug 2018, In : Materials Research Bulletin. 104, p. 227-235 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  24. Published

    High surface quality welding of aluminum using adjustable ring-mode fiber laser

    Maina, M. R., Okamoto, Y., Okada, A., Närhi, M., Kangastupa, J. & Vihinen, J., 1 Aug 2018, In : Journal of Materials Processing Technology. 258, p. 180-188 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  25. Published

    Near-threshold high spin amplification in a 1300 nm GaInNAs spin laser

    Cemlyn, B., Adams, M., Harbord, E., Li, N., Henning, I. D., Oulton, R., Korpijärvi, V. M. & Guina, M., 1 Aug 2018, In : Semiconductor Science and Technology. 33, 9, 094005.

    Research output: Contribution to journalArticleScientificpeer-review

  26. Published

    Extending the Faraday cup aerosol electrometer based calibration method up to 5 µm

    Järvinen, A., Keskinen, J. & Yli-Ojanperä, J., 3 Aug 2018, In : Aerosol Science and Technology. 52, 8, p. 828-840 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  27. Published

    Fluorescence bandwidth of 280nm from broadband Ce3+-doped silica fiber pumped with blue laser diode

    Yadav, A., Chichkov, N. B., Gumenyuk, R., Zherebtsov, E., Melkumov, M. A., Yashkov, M. V., Dianov, E. M. & Rafailov, E. U., 13 Aug 2018, 2018 International Conference Laser Optics (ICLO) . IEEE, p. 133-133 1 p. 8435861

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  28. Published

    Dilute nitride triple junction solar cells for space applications: Progress towards highest AM0 efficiency

    Aho, A., Isoaho, R., Tukiainen, A., Gori, G., Campesato, R. & Guina, M., Sep 2018, In : Progress in Photovoltaics: Research and Applications. 26, 19, p. 740-744 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  29. Published

    Post operation inactivation of acidophilic bioleaching microorganisms using natural chloride-rich mine water

    Bomberg, M., Miettinen, H., Wahlström, M., Kaartinen, T., Ahoranta, S., Lakaniemi, A-M. & Kinnunen, P., 1 Sep 2018, In : Hydrometallurgy. 180, p. 236-245 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  30. Published

    Recent progress in biohydrometallurgy and microbial characterisation

    Kaksonen, A. H., Boxall, N. J., Gumulya, Y., Khaleque, H. N., Morris, C., Bohu, T., Cheng, K. Y., Usher, K. M. & Lakaniemi, A-M., 1 Sep 2018, In : Hydrometallurgy. 180, p. 7-25 19 p.

    Research output: Contribution to journalArticleScientificpeer-review

  31. Published

    Performance evaluation of the HR-ELPI + inversion

    Saari, S., Arffman, A., Harra, J., Rönkkö, T. & Keskinen, J., 2 Sep 2018, In : Aerosol Science and Technology. 52, 9, p. 1037-1047 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  32. Published

    A COMPARATIVE IN VITRO STUDY OF CELL GROWTH ON TEXTILE SCAFFOLDS FOR TISSUE ENGINEERING APPLICATIONS

    Kroon, M., Talvitie, E., Miettinen, S. & Kellomäki, M., 12 Sep 2018.

    Research output: Other conference contributionPaper, poster or abstractScientific

  33. Published

    Mechanical, thermal, and burning properties of viscose fabric composites: Influence of epoxy resin modification

    Rajan, R., Rainosalo, E., Ramamoorthy, S. K., Thomas, S. P., Zavašnik, J., Vuorinen, J. & Skrifvars, M., 20 Sep 2018, In : Journal of Applied Polymer Science. 135, 36, 46673.

    Research output: Contribution to journalArticleScientificpeer-review

  34. Published

    Further enhancement of mechanical properties of conducting rubber composites based on multiwalled carbon nanotubes and Nitrile Rubber by solvent treatment

    Keinänen, P., Das, A. & Vuorinen, J., 23 Sep 2018, In : Materials. 11, 10, 12 p., 1806.

    Research output: Contribution to journalArticleScientificpeer-review

  35. Published

    Processing and Characterization of Bioactive Borosilicate Glasses and Scaffolds with Persistent Luminescence

    Del Cerro, P. R., Saarinen, M., Massera, J., Norrbo, I., Lastusaari, M. & Petit, L., 26 Sep 2018, 2018 20th International Conference on Transparent Optical Networks, ICTON 2018. IEEE COMPUTER SOCIETY PRESS, Vol. 2018-July. 5 p. 8473916. (Conference proceedings : International Conference on Transparent Optical Networks).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  36. Published

    Solvothermal synthesis derived Co-Ga codoped ZnO diluted magnetic degenerated semiconductor nanocrystals

    Šutka, A., Käämbre, T., Joost, U., Kooser, K., Kook, M., Duarte, R. F., Kisand, V., Maiorov, M., Döbelin, N. & Smits, K., 30 Sep 2018, In : Journal of Alloys and Compounds. 763, p. 164-172 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  37. Published

    An efficient highly flexible strain sensor: Enhanced electrical conductivity, piezoresistivity and flexibility of a strongly piezoresistive composite based on conductive carbon black and an ionic liquid

    Narongthong, J., Das, A., Le, H. H., Wießner, S. & Sirisinha, C., 1 Oct 2018, In : Composites Part A: Applied Science and Manufacturing. 113, p. 330-338 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  38. Published

    Demonstration of optical nonlinearity in InGaAsP/InP passive waveguides

    Saeidi, S., Rasekh, P., Awan, K. M., Tüğen, A., Huttunen, M. J. & Dolgaleva, K., 1 Oct 2018, In : Optical Materials. 84, p. 524-530 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  39. Published

    Novel osteoconductive β-tricalcium phosphate/poly(L-lactide-co-e-caprolactone) scaffold for bone regeneration: a study in a rabbit calvarial defect

    Pihlman, H., Keränen, P., Paakinaho, K., Linden, J., Hannula, M., Manninen, I. K., Hyttinen, J., Manninen, M. & Laitinen-Vapaavuori, O., 1 Oct 2018, In : Journal of Materials Science: Materials in Medicine. 29, 10, 156.

    Research output: Contribution to journalArticleScientificpeer-review

  40. Published

    Sensitivity Analysis of Inverse Thermal Modeling to Determine Power Losses in Electrical Machines

    Nair, D. G., Rasilo, P. & Arkkio, A., Nov 2018, In : IEEE Transactions on Magnetics. 54, 11, 8109405.

    Research output: Contribution to journalArticleScientificpeer-review

  41. Published

    Enhanced multiaxial fatigue criterion that considers stress gradient effects

    Ottosen, N. S., Ristinmaa, M. & Kouhia, R., 1 Nov 2018, In : International Journal of Fatigue. 116, p. 128-139 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  42. Published

    Tribocorrosion behaviour of aluminium bronze in 3.5 wt.% NaCl solution

    Huttunen-Saarivirta, E., Isotahdon, E., Metsäjoki, J., Salminen, T., Carpén, L. & Ronkainen, H., 1 Nov 2018, In : Corrosion Science. 144, p. 207-223 17 p.

    Research output: Contribution to journalArticleScientificpeer-review

  43. Published

    Optical properties of GaAs1-xBix/GaAs quantum well structures grown by molecular beam epitaxy on (100) and (311)B GaAs substrates

    Gunes, M., Ukelge, M. O., Donmez, O., Erol, A., Gumus, C., Alghamdi, H., Galeti, H. V. A., Henini, M., Schmidbauer, M., Hilska, J., Puustinen, J. & Guina, M., 13 Nov 2018, In : Semiconductor Science and Technology. 33, 12, 124015.

    Research output: Contribution to journalArticleScientificpeer-review

  44. Published

    Tunable Reflection Type Plasmon Induced Transparency with Graphene

    Habib, M., Ozbay, E. & Caglayan, H., 13 Nov 2018, 2018 12th International Congress on Artificial Materials for Novel Wave Phenomena, METAMATERIALS 2018. IEEE, p. 170-172 3 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  45. Published

    Cascaded crystalline raman lasers for extended wavelength coverage: Continuous-wave, third-stokes operation

    Casula, R., Penttinen, J-P., Guina, M., Kemp, A. J. & Hastie, J. E., 20 Nov 2018, In : Optica. 5, 11, p. 1406-1413 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  46. Published

    Cell response to round and star-shaped polylactide fibers

    Kroon, M., Talvitie, E., Miettinen, S. & Kellomäki, M., 23 Nov 2018.

    Research output: Other conference contributionPaper, poster or abstractScientific

  47. Published

    Considerations in analysing elemental carbon from marine engine exhaust using residual, distillate and biofuels

    Aakko-Saksa, P., Koponen, P., Aurela, M., Vesala, H., Piimäkorpi, P., Murtonen, T., Sippula, O., Koponen, H., Karjalainen, P., Kuittinen, N., Panteliadis, P., Rönkkö, T. & Timonen, H., Dec 2018, In : Journal of Aerosol Science. 126, p. 191-204 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  48. Published

    Effects of Microstructure on the Dynamic Strain Aging in Ferritic-Pearlitic Steels

    Hokka, M., Rämö, J., Mardoukhi, A., Vuoristo, T., Roth, A. & Kuokkala, V. T., Dec 2018, In : Journal of Dynamic Behavior of Materials. 4, 4, p. 452-463

    Research output: Contribution to journalArticleScientificpeer-review

  49. Published

    ICED - Inductively Coupled Energy Dissipater for Future High Field Accelerator Magnets

    Murtomäki, J. S., van Nugteren, J., Kirby, G., DeRijk, G., Rossi, L. & Stenvall, A., Dec 2018, In : IEEE Transactions on Applied Superconductivity. 28, 8, 4009015.

    Research output: Contribution to journalArticleScientificpeer-review

  50. Published

    Experimental moment resistance of rectangular hollow section T joints

    Garifullin, M., 5 Dec 2018, In : MATEC Web of Conferences. 245, 08003.

    Research output: Contribution to journalConference articleScientificpeer-review

  51. Published

    Less Is More: Enhancement of Second-Harmonic Generation from Metasurfaces by Reduced Nanoparticle Density

    Czaplicki, R., Kiviniemi, A., Huttunen, M. J., Zang, X., Stolt, T., Vartiainen, I., Butet, J., Kuittinen, M., Martin, O. J. F. & Kauranen, M., 12 Dec 2018, In : Nano Letters. 18, 12, p. 7709-7714 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  52. Published

    Oxidation-Induced Changes in the ALD-Al2O3/InAs(100) Interface and Control of the Changes for Device Processing

    Tuominen, M., Mäkelä, J., Yasir, M., Dahl, J., Granroth, S., Lehtiö, J. P., Félix, R., Laukkanen, P., Kuzmin, M., Laitinen, M., Punkkinen, M. P. J., Hedman, H. P., Punkkinen, R., Polojärvi, V., Lyytikäinen, J., Tukiainen, A., Guina, M. & Kokko, K., 26 Dec 2018, In : ACS Applied Materials and Interfaces. 10, 51, p. 44932-44940 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  53. Published

    Reversible photodoping of TiO2 nanoparticles

    Joost, U., Sutka, A., Oja, M., Smits, K., Doebelin, N., Loot, A., Järvekülg, M., Hirsimäki, M., Valden, M. & Nommiste, E., 26 Dec 2018, In : Chemistry of Materials. 30, 24, p. 8968-8974

    Research output: Contribution to journalArticleScientificpeer-review

  54. 2019
  55. Published

    1.3μm U-bend traveling wave SOA devices for high efficiency coupling to silicon photonics

    Viheriälä, J., Tuorila, H., Zia, N., Cherchi, M., Aalto, T. & Guina, M., 2019, Silicon Photonics XIV. Reed, G. T. & Knights, A. P. (eds.). SPIE, IEEE, 109230E. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 10923).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  56. Published

    1.55-μm wavelength wafer-fused OP-VECSELs in flip-chip configuration

    Mereuta, A., Nechay, K., Caliman, A., Suruceanu, G., Gallo, P., Guina, M. & Kapon, E., 2019, Vertical External Cavity Surface Emitting Lasers (VECSELs) IX. Keller, U. (ed.). SPIE, IEEE, 1090103. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 10901).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  57. Published

    405-nm pumped Ce3+-doped silica fiber for broadband fluorescence from cyan to red

    Yadav, A., Chichkov, N. B., Gumenyuk, R., Zherebtsov, E., Melkumov, M. A., Yashkov, M. V., Dianov, E. M. & Rafailov, E. U., 2019, Optical Components and Materials XVI. Digonnet, M. J. F. & Jiang, S. (eds.). SPIE, IEEE, 1091406. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 10914).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  58. Published

    Analysis of hygrothermal parameters in Finnish and Lithuanian multi-family buildings before and after energy retrofits

    Leivo, V., Kiviste, M., Aaltonen, A., Prasauskas, T., Martuzevicius, D. & Haverinen-Shaughnessy, U., 2019, In : Journal of Building Physics. 42, 4, 17 p.

    Research output: Contribution to journalArticleScientificpeer-review

  59. Published

    Analyzing Competition and Cooperation Dynamics of the Aerial mmWave Access Market

    Galinina, O., Militano, L., Andreev, S., Pyattaev, A., Johnsson, K., Orsino, A., Araniti, G., Iera, A., Dohler, M. & Koucheryavy, Y., 2019, In : IEEE Access. 7, p. 87192-87211 20 p.

    Research output: Contribution to journalArticleScientificpeer-review

  60. Published

    An automated algorithm for reliable equation of state fitting of magnetic systems

    Levämäki, H., Tian, L-Y., Vitos, L. & Ropo, M., 2019, In : Computational Materials Science. 156, p. 121-128 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  61. Accepted/In press

    Antibacterial polymer fibres by rosin compounding and melt-spinning

    Kanerva, M., Puolakka, A., Takala, T. M., Elert, A. M., Mylläri, V., Jönkkäri, I., Sarlin, E., Seitsonen, J., Ruokolainen, J., Saris, P. & Vuorinen, J., 2019, (Accepted/In press) In : Materials Today Communications. 100527.

    Research output: Contribution to journalArticleScientificpeer-review

  62. Published

    Behaviour of leaded tin bronze in simulated seawater in the absence and presence of tribological contact with alumina counterbody: Corrosion, wear and tribocorrosion

    Huttunen-Saarivirta, E., Isotahdon, E., Metsäjoki, J., Salminen, T., Ronkainen, H. & Carpén, L., 2019, In : Tribology International. 129, p. 257-271 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  63. Published

    Benchmarking of several disparity estimation algorithms for light field processing

    Zakeri, F. S., Bätz, M., Jaschke, T., Keinert, J. & Chuchvara, A., 2019, Fourteenth International Conference on Quality Control by Artificial Vision. Bazeille, S., Verrier, N. & Cudel, C. (eds.). SPIE, IEEE, 111721C. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 11172).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  64. Published

    Charge transfer dynamics in CsPbBr3 perovskite quantum dots-anthraquinone/fullerene (C60) hybrids

    Mandal, S., George, L. & Tkachenko, N. V., 2019, In : Nanoscale. 11, 3, p. 862-869 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  65. Published

    Crystallography and Mechanical Properties of Intercritically Annealed Quenched and Partitioned High-Aluminium Steel

    Nyyssönen, T., Peura, P., De Moor, E., Kuokkala, V-T. & Williamson, D. L., 2019, In : Materials Characterization. 31 p.

    Research output: Contribution to journalArticleScientificpeer-review

  66. Published

    Design, processing, and characterization of an optical core-bioactive clad phosphate fiber for biomedical applications

    Lopez-Iscoa, P., Ojha, N., Pugliese, D., Mishra, A., Gumenyuk, R., Boetti, N. G., Janner, D., Troles, J., Bureau, B., Boussard-Plédel, C., Massera, J., Milanese, D. & Petit, L., 2019, In : JOURNAL OF THE AMERICAN CERAMIC SOCIETY.

    Research output: Contribution to journalArticleScientificpeer-review

  67. E-pub ahead of print

    Dissolution, bioactivity and osteogenic properties of composites based on polymer and silicate or borosilicate bioactive glass

    Houaoui, A., Lyyra, I., Agniel, R., Pauthe, E., Massera, J. & Boissière, M., 2019, In : Materials Science and Engineering C. 107, 110340.

    Research output: Contribution to journalArticleScientificpeer-review

  68. Published

    Effect of polyolefin molecular structure on product properties in extrusion coating

    Suokas, E., 2019, 17th Biennial TAPPI European PLACE Conference 2019. TAPPI Press, p. 89-98 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  69. E-pub ahead of print

    Fabrication and Characterization of a Wireless Bioresorbable Pressure Sensor

    Palmroth, A., Salpavaara, T., Lekkala, J. & Kellomäki, M., 2019, In : Advanced Materials Technologies. 1900428.

    Research output: Contribution to journalArticleScientificpeer-review

  70. Published

    Feature Engineering for Mid-Price Prediction with Deep Learning

    Ntakaris, A., Mirone, G., Kanniainen, J., Gabbouj, M. & Iosifidis, A., 2019, In : IEEE Access. 7, p. 82390-82412 23 p.

    Research output: Contribution to journalArticleScientificpeer-review

  71. E-pub ahead of print

    First Aldol Cross-Linked Hyaluronic Acid Hydrogel: Fast and Hydrolytically Stable Hydrogel with Tissue Adhesive Properties

    Bermejo-Velasco, D., Kadekar, S., Tavares Da Costa, M. V., Oommen, O. P., Gamstedt, K., Hilborn, J. & Varghese, O. P., 2019, In : ACS Applied Materials and Interfaces.

    Research output: Contribution to journalArticleScientificpeer-review

  72. Published

    Flip-chip Wafer-fused OP-VECSELs emitting 3.65 W at the 1.55-μm waveband

    Mereuta, A., Nechay, K., Caliman, A., Suruceanu, G., Rudra, A., Gallo, P., Guina, M. & Kapon, E., 2019, In : IEEE Journal of Selected Topics in Quantum Electronics. 25, 6

    Research output: Contribution to journalArticleScientificpeer-review

  73. Published

    Gas-foamed poly(lactide-co-glycolide) and poly(lactide-co-glycolide) with bioactive glass fibres demonstrate insufficient bone repair in lapine osteochondral defects

    Salonius, E., Muhonen, V., Lehto, K., Järvinen, E., Pyhältö, T., Hannula, M., Aula, A. S., Uppstu, P., Haaparanta, A. M., Rosling, A., Kellomäki, M. & Kiviranta, I., 2019, In : Journal of Tissue Engineering and Regenerative Medicine. 13, 3, p. 406-415 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  74. E-pub ahead of print

    High-speed production of antibacterial fabrics using liquid flame spray

    Brobbey, K. J., Haapanen, J., Tuominen, M., Mäkelä, J., Gunell, M., Eerola, E., Saarinen, J. J. & Toivakka, M., 2019, In : Textile Research Journal.

    Research output: Contribution to journalArticleScientificpeer-review

  75. E-pub ahead of print

    Human Neural Tissues from Neural Stem Cells Using Conductive Biogel and Printed Polymer Microelectrode Arrays for 3D Electrical Stimulation

    Tomaskovic-Crook, E., Zhang, P., Ahtiainen, A., Kaisvuo, H., Lee, C. Y., Beirne, S., Aqrawe, Z., Svirskis, D., Hyttinen, J., Wallace, G. G., Travas-Sejdic, J. & Crook, J. M., 2019, In : ADVANCED HEALTHCARE MATERIALS. 1900425.

    Research output: Contribution to journalArticleScientificpeer-review

  76. Published

    Impact wear and mechanical behavior of steels at subzero temperatures

    Valtonen, K., Ratia, V., Ramakrishnan, K. R., Apostol, M., Terva, J. & Kuokkala, V-T., 2019, In : Tribology International. 129, p. 476-493 18 p.

    Research output: Contribution to journalArticleScientificpeer-review

  77. Published

    Integrated Use of Licensed-and Unlicensed-Band mmWave Radio Technology in 5G and beyond

    Lu, X., Sopin, E., Petrov, V., Galinina, O., Moltchanov, D., Ageev, K., Andreev, S., Koucheryavy, Y., Samouylov, K. & Dohler, M., 2019, In : IEEE Access. 7, p. 24376-24391 16 p.

    Research output: Contribution to journalArticleScientificpeer-review

  78. Accepted/In press

    In-vitro dissolution characteristics and human adipose stem cell response to novel borophosphate glasses

    Mishra, A., Ojansivu, M., Autio, R., Vanhatupa, S., Miettinen, S. & Massera, J., 2019, (Accepted/In press) In : Journal of Biomedical Materials Research - Part A.

    Research output: Contribution to journalArticleScientificpeer-review

  79. Published

    Large-scale efficient water harvesting using bioinspired micro-patterned copper oxide nanoneedle surfaces and guided droplet transport

    Sharma, V., Yiannacou, K., Karjalainen, M., Lahtonen, K., Valden, M. & Sariola, V., 2019, In : Nanoscale Advances. 1, 10, p. 4025-4040 16 p.

    Research output: Contribution to journalArticleScientificpeer-review

  80. Published

    Low-dimensional formamidinium lead perovskite architectures via controllable solvent intercalation

    Shin, M., Kim, J., Jung, Y. K., Ruoko, T-P., Priimagi, A., Walsh, A. & Shin, B., 2019, In : Journal of Materials Chemistry C. 7, 13, p. 3945-3951 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  81. Published

    Market implementation of active and intelligent packaging-opportunities from a socio-economic perspective

    Lahti, J., 2019, 17th Biennial TAPPI European PLACE Conference 2019. TAPPI Press, p. 419-427 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  82. Published

    MECSELs with direct emission in the 760 nm to 810 nm spectral range: A single- and double-side pumping comparison and high-power continuous-wave operation

    Kahle, H., Penttinen, J. P., Phung, H. M., Rajala, P., Tukiainen, A., Ranta, S. & Guina, M., 2019, Vertical External Cavity Surface Emitting Lasers (VECSELs) IX. Keller, U. (ed.). SPIE, IEEE, 109010D. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 10901).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  83. Published

    Microstructure-property relationships of novel ultra-high strength press hardening steels

    Järvinen, H., Honkanen, M., Oja, O., Järvenpää, M. & Peura, P., 2019, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 50, 2, p. 816-836 21 p.

    Research output: Contribution to journalArticleScientificpeer-review

  84. Published

    Multiphoton Excitation of CsPbBr3 Perovskite Quantum Dots (PQDs): How Many Electrons Can One PQD Donate to Multiple Molecular Acceptors?

    Mandal, S. & Tkachenko, N. V., 2019, In : Journal of Physical Chemistry Letters. p. 2775-2781 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  85. Published

    Nanocellulose and Polylactic Acid Based Multilayer Coatings for Barrier Applications

    Lahti, J., 2019, 17th Biennial TAPPI European PLACE Conference 2019. TAPPI Press, p. 446-455 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  86. Published

    Observation of local electroluminescent cooling and identifying the remaining challenges

    Radevici, I., Sadi, T., Tripurari, T., Tiira, J., Ranta, S., Tukiainen, A., Guina, M. & Oksanen, J., 2019, Photonic Heat Engines: Science and Applications. Seletskiy, D. V., Epstein, R. I. & Sheik-Bahae, M. (eds.). SPIE, IEEE, 109360A. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 10936).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  87. Published

    On the limit of superhydrophobicity: Defining the minimum amount of TiO2 nanoparticle coating

    Haapanen, J., Aromaa, M., Teisala, H., Juuti, P., Tuominen, M., Sillanpää, M., Stepien, M., Saarinen, J. J., Toivakka, M., Kuusipalo, J. & Mäkelä, J. M., 2019, In : Materials Research Express. 6, 3, 035004.

    Research output: Contribution to journalArticleScientificpeer-review

  88. Published

    Packet level performance assessment of mmWave backhauling technology for 3GPP NR Systems

    Ometov, A., Moltchanov, D., Komarov, M., Volvenko, S. V. & Koucheryavy, Y., 2019, In : IEEE Access. 7, p. 9860-9871 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  89. Published

    Prediction of signal denoising efficiency for DCT-based filter

    Abramov, S. K., Abramova, V. V., Lukin, V. V. & Egiazarian, K. O., 2019, In : Telecommunications and Radio Engineering. 78, 13, p. 1129-1142 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  90. Published

    Printed flexible microelectrode for application of nanosecond pulsed electric fields on cells

    Schubert, M., Rasche, J., Laurila, M-M., Vuorinen, T., Mäntysalo, M. & Bock, K., 2019, In : Materials. 12, 7, 2713.

    Research output: Contribution to journalArticleScientificpeer-review

  91. Published

    Reliability evaluation of wearable radio frequency identification tags: Design and fabrication of a two-part textile antenna

    Chen, X., Ukkonen, L. & Virkki, J., 2019, In : Textile Research Journal. 89, 4

    Research output: Contribution to journalArticleScientificpeer-review

  92. E-pub ahead of print

    Remote diagnostics application software for remote handling equipment

    Alanen, J., Ruiz Morales, E., Muhammad, A., Saarinen, H. & Minkkinen, J., 2019, In : Fusion Engineering and Design.

    Research output: Contribution to journalArticleScientificpeer-review

  93. Published

    Robocasting of SiO2-based bioactive glass scaffolds with porosity gradient for bone regeneration and potential load-bearing applications

    Barberi, J., Baino, F., Fiume, E., Orlygsson, G., Nommeots-Nomm, A., Massera, J. & Verné, E., 2019, In : Materials. 12, 7, 2691.

    Research output: Contribution to journalArticleScientificpeer-review

  94. E-pub ahead of print

    Role of Steel Plate Thickness on the Residual Stress Formation and Cracking Behavior During Flame Cutting

    Jokiaho, T., Santa-aho, S., Peura, P. & Vippola, M., 2019, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science.

    Research output: Contribution to journalArticleScientificpeer-review

  95. Published

    Running-in effects on friction of journal bearings under slow sliding speeds

    Linjamaa, A., Lehtovaara, A., Kallio, M. & Léger, A., 2019, In : Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology.

    Research output: Contribution to journalArticleScientificpeer-review

  96. Published

    Single exposure lensless subpixel phase imaging

    Kocsis, P., Shevkunov, I., Katkovnik, V. & Egiazarian, K., 2019, Digital Optical Technologies 2019. Kress, B. C. & Schelkens, P. (eds.). SPIE, IEEE, 9 p. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 11062).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  97. E-pub ahead of print

    Structure and Dynamics of Thermosensitive pDNA Polyplexes Studied by Time-Resolved Fluorescence Spectroscopy

    Fliervoet, L. A. L., Lisitsyna, E. S., Durandin, N. A., Kotsis, I., Maas-Bakker, R. F. M., Yliperttula, M., Hennink, W. E., Vuorimaa-Laukkanen, E. & Vermonden, T., 2019, In : Biomacromolecules.

    Research output: Contribution to journalArticleScientificpeer-review

  98. E-pub ahead of print

    Temperature scanning stress relaxation behavior of water responsive and mechanically adaptive elastomer nanocomposites

    Banerjee, S. S., Natarajan, T. S., Subramani B., E., Wießner, S., Janke, A., Heinrich, G. & Das, A., 2019, In : Journal of Applied Polymer Science. 48344.

    Research output: Contribution to journalArticleScientificpeer-review

  99. Published

    Textile-integrated three-dimensional printed and embroidered structures for wearable wireless platforms

    He, H., Chen, X., Ukkonen, L. & Virkki, J., 2019, In : Textile Research Journal. 89, 4

    Research output: Contribution to journalArticleScientificpeer-review

  100. Published

    Unique Degradation of Flash Memory as an Identifier of ICT Device

    Vladimirov, S. S., Pirmagomedov, R., Kirichek, R. & Koucheryavy, A., 2019, In : IEEE Access. 7, p. 107626-107634 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  101. E-pub ahead of print

    Validation of Printed, Skin-Mounted Multilead Electrode for ECG Measurements

    Vuorinen, T., Noponen, K., Vehkaoja, A., Onnia, T., Laakso, E., Leppänen, S., Mansikkamäki, K., Seppänen, T. & Mäntysalo, M., 2019, In : Advanced Materials Technologies. 1900246.

    Research output: Contribution to journalArticleScientificpeer-review

  102. Published

    Vocal Effort Based Speaking Style Conversion Using Vocoder Features and Parallel Learning

    Seshadri, S., Juvela, L., Räsänen, O. & Alku, P., 2019, In : IEEE Access. 7, p. 17230-17246 17 p.

    Research output: Contribution to journalArticleScientificpeer-review

Previous 1...6 7 8 9 10 11 12 Next
Download list To download, please limit the number of search results to 1,000 or less.