Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. 2019
  2. Published

    Autonomous Area Clearing with a Robotic Wheel Loader

    Halbach, E., 27 May 2019, 15th Symposium on Advanced Space Technologies in Robotics and Automation (ASTRA). Noordwijk, The Netherlands: European Space Agency, 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  3. Published

    Adiabatic Heating of Austenitic Stainless Steels at Different Strain Rates

    Vazquez-Fernandez, N. I., Soares, G. C., Smith, J. L., Seidt, J. D., Isakov, M., Gilat, A., Kuokkala, V. T. & Hokka, M., 20 Jun 2019, In : Journal of Dynamic Behavior of Materials. 5, 3, p. 221-229 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  4. Published

    An Investigation into Scuffing and Subsurface Fatigue in a Lubricated Rolling/Sliding Contact

    Savolainen, M., 28 Jun 2019, Tampere University. 81 p. (Tampere University Dissertations; vol. 57)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  5. Published

    Characterization of cracks formed in large flat-on-flat fretting contact

    Juoksukangas, J., Nurmi, V., Hintikka, J., Vippola, M., Lehtovaara, A., Mäntylä, A., Vaara, J. & Frondelius, T., Jul 2019, In : International Journal of Fatigue. 124, p. 361-370 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  6. Published

    Digital valve system for ITER remote handling – Design and prototype testing

    Siivonen, L., Paloniitty, M., Linjama, M., Sairiala, H. & Esqué, S., Sep 2019, In : Fusion Engineering and Design. 146, p. 1637 - 1641

    Research output: Contribution to journalArticleScientificpeer-review

  7. Published

    Heat management for water-hydraulic systems at ITER remote handling

    Väyrynen, J., Aha, L., Mattila, J., Esqué, S. & Sharratt, R., Sep 2019, In : Fusion Engineering and Design. 146, p. 2314-2318 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  8. Published

    Servo valve endurance test for water-hydraulic systems in ITER-relevant conditions

    Aha, L., Väyrynen, J., Tammisto, J., Mattila, J., Esqué, S. & Sharratt, R., Sep 2019, In : Fusion Engineering and Design. 146, p. 2523 - 2526

    Research output: Contribution to journalArticleScientificpeer-review

  9. Published

    Shedding frequency in cavitation erosion evolution tracking

    Ylönen, M., Franc, J. P., Miettinen, J., Saarenrinne, P. & Fivel, M., 1 Sep 2019, In : International Journal of Multiphase Flow. 118, p. 141-149 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  10. Published

    Internal and external stakeholders’ impact on product development curriculum design

    Lindsten, H., Auvinen, P. & Juuti, T., 12 Sep 2019, DS 95: Proceedings of the 21st International Conference on Engineering and Product Design Education (E&PDE 2019), University of Strathclyde, Glasgow. 12th -13th September 2019. The Design Society

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  11. Published

    Implementation of capability matchmaking software facilitating faster production system design and reconfiguration planning

    Järvenpää, E., Siltala, N., Hylli, O. & Lanz, M., Oct 2019, In : Journal of Manufacturing Systems. 53, p. 261-270 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  12. Published

    Numerical modelling of concrete fracture: A mesoscopic approach based on embedded discontinuity FEM

    Saksala, T., Oct 2019, Proceedings of the 32nd Nordic Seminar on Computational Mechanics. Niemi, A. H. & Koivurova, H. (eds.). University of Oulu, p. 146-149 4 p. (Raportti / Oulun yliopisto, konetekniikka; no. 9).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  13. Published

    On the regularisation property of the Kachanov-Rabotnov continuum damage model - a finite element study

    Askes, H., Hartikainen, J., Kolari, K., Kouhia, R., Saksala, T. & Vilppo, J., Oct 2019, Proceedings of the 32nd Nordic Seminar on Computational Mechanics. Niemi, A. H. & Koivurova, H. (eds.). University of Oulu, p. 43-46 4 p. (Raportti / Oulun yliopisto, Konetekniikka; no. 9).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  14. Published

    Model-based control of a pressure-compensated directional valve with significant dead-zone

    Lampinen, S., Koivumäki, J., Mattila, J. & Jouni, N., 7 Oct 2019, ASME/BATH 2019 Symposium on Fluid Power and Motion Control: October 7–9, 2019 Longboat Key, Florida, USA . ASME

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  15. Published

    Propulsion system development and power consumption in an autonomous underwater vehicle

    Zavari, S., Usenius, O., Villa, J., Heininen, A., Salomaa, T., Laitinen, J., Aaltonen, J. & Koskinen, K. T., 31 Oct 2019, 2019 23rd International Conference on System Theory, Control and Computing (ICSTCC). IEEE, p. 521-524 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  16. Published

    Technology Value Mapping (TVM) : Method for Designing Technology Value Capture by Visually Modelling Product Properties and Behaviours

    Mämmelä, J., 12 Dec 2019, Tampere University. 71 p. (Tampere University Dissertations; vol. 188)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  17. 2020
  18. Published

    A concept for defining the mixed-mode behaviour of tough epoxy film adhesives by single specimen design

    Jokinen, J., Orell, O., Wallin, M. & Kanerva, M., 2020, In : Journal of Adhesion Science and Technology. 34, 18, p. 1982-1999 18 p.

    Research output: Contribution to journalArticleScientificpeer-review

  19. Published

    Analyses of criticality for multiple-site delaminations in the flap spar of Finnish F/A-18 aircraft

    Jokinen, J., Kanerva, M., Wallin, M. & Saarela, O., 2020, In : AERONAUTICAL JOURNAL.

    Research output: Contribution to journalArticleScientificpeer-review

  20. Published

    Avoiding the high friction peak in fretting contact

    Juoksukangas, J., Hintikka, J., Lehtovaara, A., Mäntylä, A., Vaara, J. & Frondelius, T., 2020, In : Rakenteiden Mekaniikka. 53, 1, p. 12-19 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  21. Published

    Comparative energy analysis of a load sensing system and a zonal hydraulics for a 9-tonne excavator

    Casoli, P., Scolari, F., Minav, T. & Rundo, M., 2020, In : Actuators. 9, 2, 19 p., 39.

    Research output: Contribution to journalArticleScientificpeer-review

  22. Published

    Conceptual model of modularisation

    Pakkanen, J., Juuti, T., Lehtonen, T., Peltonen, J. & Laine, R., 2020, DS 101: Proceedings of NordDesign 2020, Lyngby, Denmark, 12th - 14th August 2020. Mortensen, N. H., Hansen, C. T. & Deininger, M. (eds.). DESIGN SOCIETY, 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Download list To download, please limit the number of search results to 1,000 or less.