Tampere University of Technology

TUTCRIS Research Portal

Publications

  1. 1988
  2. Published

    The influence of FMS-technology on the efficiency of NC-controlled machine tools

    Lakso, T., 1988, Tampere: Tampere University of Technology. 106 p. (Tampereen teknillinen korkeakoulu. Julkaisuja; vol. 50)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  3. 1992
  4. Published

    A concept for feature based quality feedback in small batch manufacturing

    Torvinen, S. J., 1992, Tampere: Tampere University of Technology. (Tampereen teknillinen korkeakoulu. Julkaisuja; vol. 103)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  5. Published

    Method for determining uncertainty of specified coordinate measurement

    Tikka, H., 1992, Tampere: Tampere University of Technology. (Tampereen teknillinen korkeakoulu. Julkaisuja; vol. 100)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  6. Published

    Methodology for evaluating the production accuracy of machine tools

    Andersson, P. H., 1992, Tampere: Tampere University of Technology. 121 p. (Tampereen teknillinen korkeakoulu. Julkaisuja; vol. 102)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  7. 1999
  8. Published

    Method for analysing planar machine tool measurements

    Hölsä, J., 1999, Tampere: Tampere University of Technology. (Tampereen teknillinen korkeakoulu. Julkaisuja; vol. 280)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  9. 2000
  10. Published

    Analysis of single flank test results providing flank topography errors of spiral bevel gears

    Jerabek, F., 2000, Tampere: Tampere University of Technology. (Tampereen teknillinen korkeakoulu. Julkaisuja; vol. 314)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  11. 2001
  12. Published

    Ideal Factory - Theory of factory planning, produceability and ideality

    Lapinleimu, I., 2001, Tampere: Tampere University of Technology. (Tampereen teknillinen korkeakoulu. Julkaisuja; vol. 328)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  13. 2002
  14. Published

    Customer-oriented nesting optimization for sheet metal manufacturing

    Sun, B., 2002, Tampere: Tampere University of Technology. 162 p. (Tampereen teknillinen korkeakoulu. Julkaisuja; vol. 368)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  15. 2005
  16. Published

    Effect of parameter uncertainty on reliability of hydraulic transmission system simulation

    Ellman, A., Kajaste, J., Kauranne, H. & Pietola, M., 2005, Proceedings of IMECE 2005, 2005 ASME International Mechanical Engineering Congress and Exposition, November 5-11, 2005, Orlando, Florida USA. p. 7 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  17. Published

    Parameter sensitivity and thickness design of anisotropic elasto-plastic shell

    Holopainen, S., 2005, Proceedings 6th Congress on Structural and Multidisplinary Optimization, Rio de Janeiro, 30 May-3 June 2005, Brazil. Herskovits, J., Mazorche, S. & Canelas, A. (eds.). ISSMO, International society for structural and multidisciplinary optimization, 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  18. Published

    Standard development of ANSI/IPC-2546 Am2. ANSI/IPC-2546 Am2: Sectional Requirements for Shop-Floor Equipment Communication Messages (CAMX) for Printed Circuit Board Assembly. Amendment 2 - Dispensing Equipment, Reflow Equipment and Final Assembly and Packaging sections

    Aube, S., Baggio, T., Breche, J., Burmeister, C., Camargo, J., Dugenske, A. D., Fraser, A., Hyvärinen, J., Karhumäki, O., Ludwig, E., Morris, D. J., Niemi, T., Ronkainen, H., Rubow, B., Siltala, N., Urho, M. & Voitus, R., 2005, Bannockburn, IL: ANSI/IPC. 124 p.

    Research output: Book/ReportBookScientificpeer-review

  19. Published

    Systemic nature of the industrial innovation process - Contribution to a philosophy of industrial engineering

    Sohlenius, G., 2005, Tampere: Tampere University of Technology. (Tampereen teknillinen yliopisto. Julkaisu; vol. 527)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  20. Published

    Framework for managing activity-based optimisation of order-delivery process

    Juuti, J., 29 Apr 2005, Tampere: Tampere University of Technology. 238 p. (Tampere University of Technology. Publication; vol. 529)

    Research output: Book/ReportDoctoral thesisMonograph

  21. 2006
  22. Published

    Out of plane actuator concept and characterization of dielectric elastomer EAP materials

    Paajanen, M., Jouppila, V., Ellman, A., Bauer, S., Kofod, G., Karesoja, M. & Tenhu, H., 2006, Applied Material Research at VTT, Helsinki, 2006. Ritschkoff, A-C., Koskinen, J. & Paajanen, M. (eds.). Helsinki: VTT, p. 50-60

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  23. Published

    Out of plane acturator concept and characterization of dielectric elastomer EAP materials

    Paajanen, M., Jouppila, V., Ellman, A., Bauer, S., Kofod, G., Karesoja, M. & Tenhu, H., 2006, Applied Material Research at VTT. VTT Symposium. Ritschkoff, A-C., Koskinen, J. & Paajanen, M. (eds.). p. 50-60

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  24. Published

    Views to micro and desktop factories - from miniaturization of products to minaturization of production equipment and factories

    Tuokko, R., 2006, Philips Precision Technology Conference (PPTC), 3-4 October, 2006, Philips Management Training and Conference Centre Groenendael, Hilvarenbeek, The Netherlands. p. 8 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  25. 2007
  26. Published

    EU:n tutkimuksen seitsemäs puiteohjelma (2007-2013) tarjoaa rahoitusmahdollisuuksia kappaletavarateollisuudelle

    Tuokko, R., 2007, In : Sisua! - Tekesin SISU 2010 -teknologiaohjelman tiedotuslehti. 1, p. 10-11

    Research output: Contribution to journalArticleProfessional

  27. Published

    Eurooppa satsaa valmistavan teollisuuden tulevaisuuteen - Tartutaan tilaisuuteen ja otetaan hyöty irti!

    Tuokko, R., 2007, In : Teknologiateollisuuden sidosryhmälehti VISIO. 1, p. s. 32

    Research output: Contribution to journalArticleProfessional

  28. Published

    MANUFUTURE 2006 -konferenssi Tampereella haki ratkaisuja Euroopan valmistavan teollisuuden tulevaisuuteen

    Tuokko, R., 2007, In : Sisua! - Tekesin SISU 2010 -teknologiaohjelman tiedotuslehti. 1, p. 8-9

    Research output: Contribution to journalArticleProfessional

  29. Published

    Sisua tuotannon kehittämiseen ja kansainvälistymiseen

    Tuokko, R., 2007, In : Sisua! - Tekesin SISU 2010 -teknologiaohjelman tiedotuslehti. 1, p. s. 1

    Research output: Contribution to journalArticleProfessional

  30. Published

    SISU hyvässä vauhdissa - tule mukaan ja tartu mahdollisuuksiin

    Tuokko, R., 2007, In : Sisua! - Tekesin SISU 2010 -teknologiaohjelman tiedotuslehti. p. s. 1

    Research output: Contribution to journalArticleProfessional

  31. 2008
  32. Published

    Design education with simulation games

    Juuti, T., Hansen, P. K. & Lehtonen, T., 2008, Proceedings of the 10th Engineering and product design Eduacation International Conference, 4-5 September, 2008, Universitat Politecnica de Catalunya, Barcelona, Spain. Clarke, A., Evatt, M., Hogarth, P., Lloveras, J. & Pons, L. (eds.). p. 811-816

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  33. Published

    Design management of product with variability and commonality

    Juuti, T., 2008, Tampere: Tampere University of Technology. 153 p. (Tampereen teknillinen yliopisto. Julkaisu; vol. 789)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  34. Published

    Development of a test device for the evaluation of hydrodynamic lubrication in thrust bearings

    Pasanen, A., Kleemola, J. & Lehtovaara, A., 2008, In : Tribologia - Finnish Journal of Tribology. 27, 4, p. 12-20

    Research output: Contribution to journalArticleScientificpeer-review

  35. Published

    Development of DTP2 subsystems and tooling in support of remote handling trials

    Mattila, J., 2008, Espoo: VTT. 7 p. (VTT Publications; vol. 678)

    Research output: Book/ReportCommissioned reportProfessional

  36. Published

    Development of micro gripper systems for microfactories

    Heikkilä, R., Remes, M., Prusi, T. & Tuokko, R., 2008, Proceedings of the 4th International Workshop on Microfactory Technology, 10-11 July, 2008, Jeju-do, Korea. p. 4 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  37. Published

    EFDA quality assurance exercise

    Mattila, J. & Järvenpää, J., 2008, Espoo: VTT. 2 p. (VTT Publications; vol. 678)

    Research output: Book/ReportCommissioned reportProfessional

  38. Published

    Formal validation of discrete automation systems applying structural reasoning and general unary hypothesis automaton methods

    Lobov, A., 2008, Tampere: Tampere University of Technology. 121 p. (Tampereen teknillinen yliopisto. Julkaisu; vol. 782)

    Research output: Book/ReportDoctoral thesisCollection of Articles

  39. Published

    Host activities in connection with the DTP2 test facility

    Järvenpää, J., Timperi, A., Tuominen, R. & Mattila, J., 2008, Espoo: VTT. 5 p. (VTT Publications; vol. 678)

    Research output: Book/ReportCommissioned reportProfessional

  40. Published

    Implementation of a DTP2 safety system for testing, and final CMM/SCEE integration and commissioning

    Mattila, J. & Järvenpää, J., 2008, Espoo: VTT. 3 p. (VTT Publications; vol. 678)

    Research output: Book/ReportCommissioned reportProfessional

  41. Published

    Improving learning results with peer evaluation

    Kallela, T., Lanz, M., Rapo, L. & Riitahuhta, A., 2008, New Perspectives in design education, Universitat Politecnica de Catalunya, 4-5 September, 2008, Barcelona, Spain. Clarke, A. (ed.). p. 799-804

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  42. Published

    In cooperation towards innovative manufacture and factories of future

    Tuokko, R., 2008, In : Newsletter of Tekes SISU 2010 -Innovative Manufacture Programme.

    Research output: Contribution to journalArticleProfessional

  43. Laser treatment of PVD coated carbon steels and powder steels

    Surzhenkov, A., Kulu, P., Gregor, A., Vuoristo, P., Latokartano, J. & Rupponen, M., 2008, In : Materials Science: Medziagotyra. 14, 4, p. 301-305

    Research output: Contribution to journalArticleScientificpeer-review

  44. Published

    Rohkeutta ja Sisua kasvuun, kansainvälistymiseen ja irtiottoihin!

    Tuokko, R., 2008, In : Sisua! - Tekesin SISU 2010 -teknologiaohjelman tiedotuslehti. p. s. 1

    Research output: Contribution to journalArticleProfessional

  45. Published

    SISU 2010 tiellä kohti uutta tuotantoajattelua

    Tuokko, R., 2008, In : Sisua! - Tekesin SISU 2010 -teknologiaohjelman tiedotuslehti. p. s. 1

    Research output: Contribution to journalArticleProfessional

  46. Published

    Software development and modelling of the CMM system

    Mattila, J., 2008, Espoo: VTT. 2 p. (VTT Publications; vol. 678)

    Research output: Book/ReportCommissioned reportProfessional

  47. 2009
  48. Published

    2008-2009 Host Activities Related to DTP2 Test Facility Operation and Upgrade Preparation

    Siuko, M., Järvenpää, J. & Mattila, J., 2009, VTT. 10 p. (VTT Publications; vol. 709)

    Research output: Book/ReportCommissioned reportProfessional

  49. Published

    AMAD-painekytkimien laboratoriotestaus

    Hietala, J-P., 2009, Lentotekniikan rakennetutkimuksen neuvottelupäivät VII, 27.-28.8.2009, Tampere. Aaltonen, J. (ed.). p. 1-14 14 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  50. Published

    Enhanced industrial maintenance work task planning by using virtual engineering tools and haptic user interfaces

    Leino, S-P., Lind, S., Poyade, M., Kiviranta, S., Multanen, P., Reyes-Lecuona, A., Mäkiranta, A. & Muhammad, A., 2009, In : Lecture Notes in Computer Science. 5622, p. 346-354

    Research output: Contribution to journalArticleScientificpeer-review

  51. Published

    Feature recognition as a basis for the cost allocation and decision making toolset

    Lanz, M., Luostarinen, P., Garcia, F. & Andersson, P. H., 2009, Proceedings of the 20th International Conference on Production Research, ICPR'2009, August 2009, Shanghai, China. p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  52. Published

    Hydrauliikan online -kunnonvalvonta

    Virta, P., 2009, Lentotekniikan rakennetutkimuksen neuvottelupäivät VII, 27.-28.8.2009, Tampere. Aaltonen, J. (ed.). p. 1-11 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  53. Published

    Implementation of a DTP2 safety system for testing, and final CMM/SCEE integration and commissioning

    Mattila, J. & Järvenpää, J., 2009, VTT. 3 p. (VTT Publications; vol. 709)

    Research output: Book/ReportCommissioned reportProfessional

  54. In memory of emeritus professor Kauko Aho : Muistokirjoitus emeritusprofessori Kauko Aho 14.9.1922-3.3.2009

    Lehtovaara, A., Verho, A. & Riitahuhta, A., 2009, In : Tribologia - Finnish Journal of Tribology. 28, 1-2, p. 3-4

    Research output: Contribution to journalArticleGeneral public

  55. Published

    Jammed on/off valve fault compensation with distributed digital valve system

    Siivonen, L., Linjama, M., Huova, M. & Vilenius, M., 2009, In : International Journal of Fluid Power. 10, 2, p. 73-82

    Research output: Contribution to journalArticleScientificpeer-review

  56. Published

    Lamantappohenkeä ja tulevaisuuden kilpailukykyä peräämässä

    Tuokko, R., 2009, In : Sisua! - Tekesin SISU 2010 -teknologiaohjelman tiedotuslehti. p. s. 1

    Research output: Contribution to journalArticleProfessional

  57. Published

    Metviro

    Kortemaa, A., Mäkelä, T., Punki, J., Ranta, P., Palonen, T., Leino, T. & Koskinen, K. T., 2009

    Research output: Artistic and non-textual formSoftwareScientific

  58. Published

    Model-based design of power-split drivelines

    Erkkilä, M., Huhtala, K., Vilenius, M. & Virvalo, T., 2009, Agricultural Engineering Conference 2009, 6.-7.11.2009, Hannover, Germany. VDI-Berichte. p. 327-332

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  59. Published

    On the relation of business processes and engineering change management

    Pulkkinen, A. & Riitahuhta, A., 2009, Proceedings of the 6th International Product Lifecycle Management conference, PLM09, 6-8 July 2009, Bath, UK. McMahon, C., Dutta, D. & Huang, G. (eds.). p. 10 p

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  60. Published

    Oxy-fuel combustion and flue gases recirculation: Apparatus development, measurements and model

    Rodriguez, M., 2009, Tampere: Unknown Publisher. 27 p. (Tampereen teknillinen yliopisto, Energia- ja prosessitekniikan laitos. Raportti; vol. 190)

    Research output: Book/ReportCommissioned reportProfessional

  61. Published

    Sisulla eteenpäin!

    Tuokko, R., 2009, In : Sisua! - Tekesin SISU 2010 -teknologiaohjelman tiedotuslehti. p. s. 1

    Research output: Contribution to journalArticleProfessional

Previous 1 2 3 4 5 6 7 8 ...25 Next
Download list To download, please limit the number of search results to 1,000 or less.